TY  - JOUR
AU  - Salah Adeen Embirsh, Hifa
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana O.
AU  - Knežević, Nataša
AU  - Milošević, Milena
AU  - Mijatov, Slavko
AU  - Jančić Heinemann, Radmila
AU  - Marinković, Aleksandar
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13225
AB  - Materials from green resources boast a low carbon footprint, forming the foundation of the circular economy approach in materials science. Thus, in this study, waste poly(ethylene terephthalate) (PET) was subjected to depolymerization using propylene glycol (PG), and subsequent polycondensation with bio-based maleic anhydride (MA) produced unsaturated polyester resin (b-UPR). Bio-derived acryloyl-modified Kraft lignin (KfL-A) served as a vinyl reactive filler in the b-UPR matrix to create b-UPR/KfL-A composites. The structural characterization of KfL-A and b-UPR involved the use of FTIR and NMR techniques. The mechanical properties of the newly fabricated composites were assessed through tensile strength, Vickers microhardness, and dynamic mechanical tests. The addition of KfL-A to the rigid b-UPR matrix enhanced material flexibility, resulting in less stiff and hard materials while preserving composite toughness. For instance, incorporating 10 wt.% of KfL-A in b-UPR led to a 17% reduction in hardness, a 48% decrease in tensile strength, and a 20% reduction in toughness. Positive environmental impact was achieved by incorporation of 64 wt.% of renewable and recycled raw material. Analogously prepared b-UPR/KfL composites showed structural inhomogeneity and somewhat better mechanical properties. Transmission (TEM) and scanning (SEM) electron microscopies revealed a suitable relationship between mechanical and structural properties of composites in relation to the extent of KfL-A addition. The UL94V flammability rating confirmed that flame resistance increased proportionally with the KfL-A addition. Once deposited in a landfill, these composites are expected to disintegrate more easily than PET, causing less harm to the environment and contributing to sustainability in the plastics cycle.
T2  - Chemosphere
T1  - Unsaturated polyester resin based composites: A case study of lignin valorisation
IS  - InPress
SP  - 142144
DO  - 10.1016/j.chemosphere.2024.142144
ER  - 

@article{
author = "Salah Adeen Embirsh, Hifa and Vuksanović, Marija M. and Mladenović, Ivana O. and Knežević, Nataša and Milošević, Milena and Mijatov, Slavko and Jančić Heinemann, Radmila and Marinković, Aleksandar",
year = "2024",
abstract = "Materials from green resources boast a low carbon footprint, forming the foundation of the circular economy approach in materials science. Thus, in this study, waste poly(ethylene terephthalate) (PET) was subjected to depolymerization using propylene glycol (PG), and subsequent polycondensation with bio-based maleic anhydride (MA) produced unsaturated polyester resin (b-UPR). Bio-derived acryloyl-modified Kraft lignin (KfL-A) served as a vinyl reactive filler in the b-UPR matrix to create b-UPR/KfL-A composites. The structural characterization of KfL-A and b-UPR involved the use of FTIR and NMR techniques. The mechanical properties of the newly fabricated composites were assessed through tensile strength, Vickers microhardness, and dynamic mechanical tests. The addition of KfL-A to the rigid b-UPR matrix enhanced material flexibility, resulting in less stiff and hard materials while preserving composite toughness. For instance, incorporating 10 wt.% of KfL-A in b-UPR led to a 17% reduction in hardness, a 48% decrease in tensile strength, and a 20% reduction in toughness. Positive environmental impact was achieved by incorporation of 64 wt.% of renewable and recycled raw material. Analogously prepared b-UPR/KfL composites showed structural inhomogeneity and somewhat better mechanical properties. Transmission (TEM) and scanning (SEM) electron microscopies revealed a suitable relationship between mechanical and structural properties of composites in relation to the extent of KfL-A addition. The UL94V flammability rating confirmed that flame resistance increased proportionally with the KfL-A addition. Once deposited in a landfill, these composites are expected to disintegrate more easily than PET, causing less harm to the environment and contributing to sustainability in the plastics cycle.",
journal = "Chemosphere",
title = "Unsaturated polyester resin based composites: A case study of lignin valorisation",
number = "InPress",
pages = "142144",
doi = "10.1016/j.chemosphere.2024.142144"
}

Salah Adeen Embirsh, H., Vuksanović, M. M., Mladenović, I. O., Knežević, N., Milošević, M., Mijatov, S., Jančić Heinemann, R.,& Marinković, A.. (2024). Unsaturated polyester resin based composites: A case study of lignin valorisation. in Chemosphere(InPress), 142144.
https://doi.org/10.1016/j.chemosphere.2024.142144

Salah Adeen Embirsh H, Vuksanović MM, Mladenović IO, Knežević N, Milošević M, Mijatov S, Jančić Heinemann R, Marinković A. Unsaturated polyester resin based composites: A case study of lignin valorisation. in Chemosphere. 2024;(InPress):142144.
doi:10.1016/j.chemosphere.2024.142144 .

Salah Adeen Embirsh, Hifa, Vuksanović, Marija M., Mladenović, Ivana O., Knežević, Nataša, Milošević, Milena, Mijatov, Slavko, Jančić Heinemann, Radmila, Marinković, Aleksandar, "Unsaturated polyester resin based composites: A case study of lignin valorisation" in Chemosphere, no. InPress (2024):142144,
https://doi.org/10.1016/j.chemosphere.2024.142144 . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Milošević, Milena
AU  - Knežević, Nataša
AU  - Egelja, Adela
AU  - Janković-Mandić, Ljiljana
AU  - Mladenović, Ivana
AU  - Marinković, Aleksandar
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11444
AB  - Predmet ovog istraživanja je postupak proizvodnje regranulata polivinil hlorida (PVC) korišćenjem plastifikatora sintetisanog iz recikliranog poli(etilen tereftalata) (PET). Na ovaj način je sintetisan plastifikator koji ne predstavlja rizik po zdravlje ljudi i životnu sredinu u skladu sa prinicima hemijskog lizinga i zelene hemije. Dobijeni plastifikator je okarakterisan primenom elementalne analize, FTIR, i NMR spektroskopije i određivanjem hidroksilnog i kiselinskog broja. Ispitivana su mehanička svojstva materijala dobijenih na bazi recikliranog PVC i plastifikatora iz PET-a prema standardnim metodama.
AB  - The subject of this research is the production process of polyvinyl chloride (PVC) regranulate using a plasticizer synthesized from recycled poly(ethylene terephthalate) (PET). In this way, a plasticizer was synthesized that does not pose a risk to human health and the environment in accordance with the principles of chemical leasing and green chemistry. The obtained plasticizer was characterized using elemental analysis, FTIR, and NMR spectroscopy and determination of hydroxyl and acid number. The mechanical properties of materials obtained on the basis of recycled PVC and plasticizers from PET were tested according to standard methods.
T2  - Tehnika
T1  - Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a
T1  - Testing of the mechanical properties of reggranulate PVC with the addition of plasticizer from waste PET
VL  - 78
IS  - 4
SP  - 389
EP  - 394
DO  - 10.5937/tehnika2304389V
ER  - 

@article{
author = "Vuksanović, Marija M. and Milošević, Milena and Knežević, Nataša and Egelja, Adela and Janković-Mandić, Ljiljana and Mladenović, Ivana and Marinković, Aleksandar",
year = "2023",
abstract = "Predmet ovog istraživanja je postupak proizvodnje regranulata polivinil hlorida (PVC) korišćenjem plastifikatora sintetisanog iz recikliranog poli(etilen tereftalata) (PET). Na ovaj način je sintetisan plastifikator koji ne predstavlja rizik po zdravlje ljudi i životnu sredinu u skladu sa prinicima hemijskog lizinga i zelene hemije. Dobijeni plastifikator je okarakterisan primenom elementalne analize, FTIR, i NMR spektroskopije i određivanjem hidroksilnog i kiselinskog broja. Ispitivana su mehanička svojstva materijala dobijenih na bazi recikliranog PVC i plastifikatora iz PET-a prema standardnim metodama., The subject of this research is the production process of polyvinyl chloride (PVC) regranulate using a plasticizer synthesized from recycled poly(ethylene terephthalate) (PET). In this way, a plasticizer was synthesized that does not pose a risk to human health and the environment in accordance with the principles of chemical leasing and green chemistry. The obtained plasticizer was characterized using elemental analysis, FTIR, and NMR spectroscopy and determination of hydroxyl and acid number. The mechanical properties of materials obtained on the basis of recycled PVC and plasticizers from PET were tested according to standard methods.",
journal = "Tehnika",
title = "Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a, Testing of the mechanical properties of reggranulate PVC with the addition of plasticizer from waste PET",
volume = "78",
number = "4",
pages = "389-394",
doi = "10.5937/tehnika2304389V"
}

Vuksanović, M. M., Milošević, M., Knežević, N., Egelja, A., Janković-Mandić, L., Mladenović, I.,& Marinković, A.. (2023). Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a. in Tehnika, 78(4), 389-394.
https://doi.org/10.5937/tehnika2304389V

Vuksanović MM, Milošević M, Knežević N, Egelja A, Janković-Mandić L, Mladenović I, Marinković A. Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a. in Tehnika. 2023;78(4):389-394.
doi:10.5937/tehnika2304389V .

Vuksanović, Marija M., Milošević, Milena, Knežević, Nataša, Egelja, Adela, Janković-Mandić, Ljiljana, Mladenović, Ivana, Marinković, Aleksandar, "Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a" in Tehnika, 78, no. 4 (2023):389-394,
https://doi.org/10.5937/tehnika2304389V . .