TY  - JOUR
AU  - Kokunešoski, Maja
AU  - Janaćković, Đorđe
AU  - Kićević, Dušan
AU  - Ilić, Svetlana
AU  - Šaponjić, Aleksandra
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11104
AB  - Effect of methyl methacrylate (MMA) as a binder and heating treatment were investigated to improve green alumina compacts machinability. Properties of green compacts and their corresponding sintered samples prepared with and without MMA were compared. Investigation of green and sintered properties was performed on samples compacted at applied pressures up to 150 MPa. After pressing, samples with MMA were thermally treated at 115oC. The intention was to enhance the polymerization of MMA at a temperature a little higher than the glass transition temperature (Tg = 103oC) of poly (methyl methacrylate). Green compacts with MMA had higher green density values than those without MMA. Sintered samples with MMA had lower values of sintered density and higher values of total porosity; after sintering, relative linear shrinkage was around 15 % for the whole range of applied pressures. The possibility of easily machining the green compacts with MMA produces great possibilities for application in many fields
T2  - Science of Sintering
T1  - The effect of acrylate on the properties and machinability of alumina ceramics
VL  - 55
IS  - 1
SP  - 103
EP  - 113
DO  - 10.2298/SOS2301103K
ER  - 

@article{
author = "Kokunešoski, Maja and Janaćković, Đorđe and Kićević, Dušan and Ilić, Svetlana and Šaponjić, Aleksandra",
year = "2023",
abstract = "Effect of methyl methacrylate (MMA) as a binder and heating treatment were investigated to improve green alumina compacts machinability. Properties of green compacts and their corresponding sintered samples prepared with and without MMA were compared. Investigation of green and sintered properties was performed on samples compacted at applied pressures up to 150 MPa. After pressing, samples with MMA were thermally treated at 115oC. The intention was to enhance the polymerization of MMA at a temperature a little higher than the glass transition temperature (Tg = 103oC) of poly (methyl methacrylate). Green compacts with MMA had higher green density values than those without MMA. Sintered samples with MMA had lower values of sintered density and higher values of total porosity; after sintering, relative linear shrinkage was around 15 % for the whole range of applied pressures. The possibility of easily machining the green compacts with MMA produces great possibilities for application in many fields",
journal = "Science of Sintering",
title = "The effect of acrylate on the properties and machinability of alumina ceramics",
volume = "55",
number = "1",
pages = "103-113",
doi = "10.2298/SOS2301103K"
}

Kokunešoski, M., Janaćković, Đ., Kićević, D., Ilić, S.,& Šaponjić, A.. (2023). The effect of acrylate on the properties and machinability of alumina ceramics. in Science of Sintering, 55(1), 103-113.
https://doi.org/10.2298/SOS2301103K

Kokunešoski M, Janaćković Đ, Kićević D, Ilić S, Šaponjić A. The effect of acrylate on the properties and machinability of alumina ceramics. in Science of Sintering. 2023;55(1):103-113.
doi:10.2298/SOS2301103K .

Kokunešoski, Maja, Janaćković, Đorđe, Kićević, Dušan, Ilić, Svetlana, Šaponjić, Aleksandra, "The effect of acrylate on the properties and machinability of alumina ceramics" in Science of Sintering, 55, no. 1 (2023):103-113,
https://doi.org/10.2298/SOS2301103K . .

Kokunešoski, M., Kićević, D., Šaponjić, Đ., Ilić, S., Egelja, A., Šaponjić, A.,& Bučevac, D.. (2022). Primena metil metakrilata u izradi keramičkog zavrtnja mašinskom obradom ispresaka. in Univerzitet u Beogradu, Institut za nuklearne nauke "Vinča", Institut od nacionalnog značaja za Republiku Srbiju.
https://hdl.handle.net/21.15107/rcub_vinar_11416

Kokunešoski M, Kićević D, Šaponjić Đ, Ilić S, Egelja A, Šaponjić A, Bučevac D. Primena metil metakrilata u izradi keramičkog zavrtnja mašinskom obradom ispresaka. in Univerzitet u Beogradu, Institut za nuklearne nauke "Vinča", Institut od nacionalnog značaja za Republiku Srbiju. 2022;.
https://hdl.handle.net/21.15107/rcub_vinar_11416 .

Kokunešoski, Maja, Kićević, Dušan, Šaponjić, Đorđe, Ilić, Svetlana, Egelja, Adela, Šaponjić, Aleksandra, Bučevac, Dušan, "Primena metil metakrilata u izradi keramičkog zavrtnja mašinskom obradom ispresaka" in Univerzitet u Beogradu, Institut za nuklearne nauke "Vinča", Institut od nacionalnog značaja za Republiku Srbiju (2022),
https://hdl.handle.net/21.15107/rcub_vinar_11416 .

TY  - JOUR
AU  - Kokunešoski, Maja
AU  - Kićević, Dušan
AU  - Šaponjić, Đorđe
AU  - Ilić, Svetlana M.
AU  - Egelja, Adela
AU  - Šaponjić, Aleksandra
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10939
AB  - Ispitana je mogućnost primene metil metakrilata, MMA, kao akrilnog veziva u pripremi keramičkog praha alumine za presovanje sa namerom da se poboljša mašinska obradljivost ispresaka od alumine. Poređene su osobine ispresaka i osobine njima odgovarajućih sinterovanih uzoraka koji su pripremljeni sa i bez akrilnog veziva. Visoka gustina ispresaka sa MMA (2,35 g/cm3) u odnosu na ispreske samo od alumine (2,11 g/cm3) formiranih pod optimalnim pritiskom presovanja od 60 MPa, ukazuje na uticaj akrilata na poboljšano pakovanje praha alumine i njihovu odličnu mašinsku obradljivost; kod sinterovanih uzoraka povećana je poroznost, a smanjene su gustina i procenat linearnog skupljanja. Pokazano je da se mašinskom obradom ispresaka alumine sa MMA, mogu napraviti složene forme poput keramičkog zavrtnja ili keramički delovi sklopova, sa velikim mogućnostima komercijalne primene.
AB  - Investigated the possibility of using methyl methacrylate (MMA) as an acrylic binder in the preparation of ceramic powder of alumina for pressing with the intention of improving machinability of alumina flakes. Compared the properties of the green bodies and the properties of their corresponding sintered samples that are prepared with and without acrylic binder. The achieved higher density of green bodies with MMA (2.35 g/cm3) compared to green bodies without MMA (2.11 g/cm3) were formed under the optimal pressure of 60 MPa, indicating the improved packing of alumina powder with addition of acrylate. In the case of sintered samples, the porosities were increased, and the density and percentage of linear shrinkage were reduced. It has been shown that machining of green bodies, prepared with MMA, can be produced in the form of complex ceramic products of alumina like a screw with a nut and with great possibilities of commercial application.
T2  - Zaštita materijala
T1  - Uticaj metil metakrilatoma kao akrilnog veziva na mašinsku obradljivost ispresaka alumine
T1  - Influence of methyl methacrylate as an acrylic binder on a green machining of alumina ceramics
VL  - 60
IS  - 2
SP  - 157
EP  - 161
DO  - 10.5937/zasmat1902157K
ER  - 

@article{
author = "Kokunešoski, Maja and Kićević, Dušan and Šaponjić, Đorđe and Ilić, Svetlana M. and Egelja, Adela and Šaponjić, Aleksandra",
year = "2019",
abstract = "Ispitana je mogućnost primene metil metakrilata, MMA, kao akrilnog veziva u pripremi keramičkog praha alumine za presovanje sa namerom da se poboljša mašinska obradljivost ispresaka od alumine. Poređene su osobine ispresaka i osobine njima odgovarajućih sinterovanih uzoraka koji su pripremljeni sa i bez akrilnog veziva. Visoka gustina ispresaka sa MMA (2,35 g/cm3) u odnosu na ispreske samo od alumine (2,11 g/cm3) formiranih pod optimalnim pritiskom presovanja od 60 MPa, ukazuje na uticaj akrilata na poboljšano pakovanje praha alumine i njihovu odličnu mašinsku obradljivost; kod sinterovanih uzoraka povećana je poroznost, a smanjene su gustina i procenat linearnog skupljanja. Pokazano je da se mašinskom obradom ispresaka alumine sa MMA, mogu napraviti složene forme poput keramičkog zavrtnja ili keramički delovi sklopova, sa velikim mogućnostima komercijalne primene., Investigated the possibility of using methyl methacrylate (MMA) as an acrylic binder in the preparation of ceramic powder of alumina for pressing with the intention of improving machinability of alumina flakes. Compared the properties of the green bodies and the properties of their corresponding sintered samples that are prepared with and without acrylic binder. The achieved higher density of green bodies with MMA (2.35 g/cm3) compared to green bodies without MMA (2.11 g/cm3) were formed under the optimal pressure of 60 MPa, indicating the improved packing of alumina powder with addition of acrylate. In the case of sintered samples, the porosities were increased, and the density and percentage of linear shrinkage were reduced. It has been shown that machining of green bodies, prepared with MMA, can be produced in the form of complex ceramic products of alumina like a screw with a nut and with great possibilities of commercial application.",
journal = "Zaštita materijala",
title = "Uticaj metil metakrilatoma kao akrilnog veziva na mašinsku obradljivost ispresaka alumine, Influence of methyl methacrylate as an acrylic binder on a green machining of alumina ceramics",
volume = "60",
number = "2",
pages = "157-161",
doi = "10.5937/zasmat1902157K"
}

Kokunešoski, M., Kićević, D., Šaponjić, Đ., Ilić, S. M., Egelja, A.,& Šaponjić, A.. (2019). Uticaj metil metakrilatoma kao akrilnog veziva na mašinsku obradljivost ispresaka alumine. in Zaštita materijala, 60(2), 157-161.
https://doi.org/10.5937/zasmat1902157K

Kokunešoski M, Kićević D, Šaponjić Đ, Ilić SM, Egelja A, Šaponjić A. Uticaj metil metakrilatoma kao akrilnog veziva na mašinsku obradljivost ispresaka alumine. in Zaštita materijala. 2019;60(2):157-161.
doi:10.5937/zasmat1902157K .

Kokunešoski, Maja, Kićević, Dušan, Šaponjić, Đorđe, Ilić, Svetlana M., Egelja, Adela, Šaponjić, Aleksandra, "Uticaj metil metakrilatoma kao akrilnog veziva na mašinsku obradljivost ispresaka alumine" in Zaštita materijala, 60, no. 2 (2019):157-161,
https://doi.org/10.5937/zasmat1902157K . .

TY  - BOOK
AU  - Popović, Predrag
AU  - Čanić, Dragana
AU  - Tufegdžić, Miroslav
AU  - Kovačević, Ljubiša
AU  - Jovašević-Stojanović, Milena
AU  - Grahovac, Jelica
AU  - Pavlović, Mirjana
AU  - Kićević, Dušan
AU  - Turanjanin, Valentina
AU  - Tjapkin, Nikola
AU  - Đurđević, Aleksandar
AU  - Videnović, Aleksandar
AU  - Mitrović, Radivoje
AU  - Stamenić, Zoran
AU  - Petrović, Aleksandar
AU  - Mitrović, Nenad
AU  - Balać, Martina
AU  - Đapić, Mirko
AU  - Kokunešoski, Maja
PY  - 2009
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11431
PB  - Београд : Институт за нуклеарне науке "Винча"
T1  - Оцењивање усаглашености производа : развој инфракстуре
SP  - 432
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11431
ER  - 

@book{
editor = "Popović, Predrag, Mitrović, Radivoje",
author = "Popović, Predrag and Čanić, Dragana and Tufegdžić, Miroslav and Kovačević, Ljubiša and Jovašević-Stojanović, Milena and Grahovac, Jelica and Pavlović, Mirjana and Kićević, Dušan and Turanjanin, Valentina and Tjapkin, Nikola and Đurđević, Aleksandar and Videnović, Aleksandar and Mitrović, Radivoje and Stamenić, Zoran and Petrović, Aleksandar and Mitrović, Nenad and Balać, Martina and Đapić, Mirko and Kokunešoski, Maja",
year = "2009",
publisher = "Београд : Институт за нуклеарне науке "Винча"",
title = "Оцењивање усаглашености производа : развој инфракстуре",
pages = "432",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11431"
}

Popović, P., Mitrović, R., Popović, P., Čanić, D., Tufegdžić, M., Kovačević, L., Jovašević-Stojanović, M., Grahovac, J., Pavlović, M., Kićević, D., Turanjanin, V., Tjapkin, N., Đurđević, A., Videnović, A., Mitrović, R., Stamenić, Z., Petrović, A., Mitrović, N., Balać, M., Đapić, M.,& Kokunešoski, M.. (2009). Оцењивање усаглашености производа : развој инфракстуре. 
Београд : Институт за нуклеарне науке "Винча"., 432.
https://hdl.handle.net/21.15107/rcub_vinar_11431

Popović P, Mitrović R, Popović P, Čanić D, Tufegdžić M, Kovačević L, Jovašević-Stojanović M, Grahovac J, Pavlović M, Kićević D, Turanjanin V, Tjapkin N, Đurđević A, Videnović A, Mitrović R, Stamenić Z, Petrović A, Mitrović N, Balać M, Đapić M, Kokunešoski M. Оцењивање усаглашености производа : развој инфракстуре. 2009;:432.
https://hdl.handle.net/21.15107/rcub_vinar_11431 .

Popović, Predrag, Mitrović, Radivoje, Popović, Predrag, Čanić, Dragana, Tufegdžić, Miroslav, Kovačević, Ljubiša, Jovašević-Stojanović, Milena, Grahovac, Jelica, Pavlović, Mirjana, Kićević, Dušan, Turanjanin, Valentina, Tjapkin, Nikola, Đurđević, Aleksandar, Videnović, Aleksandar, Mitrović, Radivoje, Stamenić, Zoran, Petrović, Aleksandar, Mitrović, Nenad, Balać, Martina, Đapić, Mirko, Kokunešoski, Maja, "Оцењивање усаглашености производа : развој инфракстуре" (2009):432,
https://hdl.handle.net/21.15107/rcub_vinar_11431 .

TY  - CONF
AU  - Pavlović, Mirjana
AU  - Kokunešoski, Maja
AU  - Popović, Predrag
AU  - Kićević, Dušan
PY  - 2007
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11274
AB  - Prema EU Direktivi 94/62/EC, nivo koncentracije olova, kadmijuma, žive i šestovaletnog hroma u ambalaži i u komponentama ambalaže ne bi smeo da pređe 100 µg/g nakon 30. juna 2001.godine. U ovom radu opisane su metode za merenje i kontrolisanje četiri teška metala u različitim vrstama ambalažnog materijala, razvijene u Laboratoriji za fizičku hemiju Instituau za nuklearne nauke "Vinča"
AB  - According to EU Directive 94/62/EC, the sum of concentration levels of lead, cadmium, mercury and hexavalent chromium in packaging and packaging components should not exceed 100 ppm by weight after 30 June 2001. In this paper procedures for measuring and verifying the four heavy metals in various packaging materials, developed in Laboratory for physical chemistry in "Vinča" Institute of nuclear sciences, are described.
PB  - Asocijacija za kvalitet i standardizaciju Srbije
C3  - Festival kvaliteta : 34. Nacionalna konferencija o kvalitetu; Maj 8-11, Kragujevac
T1  - Određivanje četiri teška metala u različitim ambalažnim materijalima
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11274
ER  - 

@conference{
author = "Pavlović, Mirjana and Kokunešoski, Maja and Popović, Predrag and Kićević, Dušan",
year = "2007",
abstract = "Prema EU Direktivi 94/62/EC, nivo koncentracije olova, kadmijuma, žive i šestovaletnog hroma u ambalaži i u komponentama ambalaže ne bi smeo da pređe 100 µg/g nakon 30. juna 2001.godine. U ovom radu opisane su metode za merenje i kontrolisanje četiri teška metala u različitim vrstama ambalažnog materijala, razvijene u Laboratoriji za fizičku hemiju Instituau za nuklearne nauke "Vinča", According to EU Directive 94/62/EC, the sum of concentration levels of lead, cadmium, mercury and hexavalent chromium in packaging and packaging components should not exceed 100 ppm by weight after 30 June 2001. In this paper procedures for measuring and verifying the four heavy metals in various packaging materials, developed in Laboratory for physical chemistry in "Vinča" Institute of nuclear sciences, are described.",
publisher = "Asocijacija za kvalitet i standardizaciju Srbije",
journal = "Festival kvaliteta : 34. Nacionalna konferencija o kvalitetu; Maj 8-11, Kragujevac",
title = "Određivanje četiri teška metala u različitim ambalažnim materijalima",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11274"
}

Pavlović, M., Kokunešoski, M., Popović, P.,& Kićević, D.. (2007). Određivanje četiri teška metala u različitim ambalažnim materijalima. in Festival kvaliteta : 34. Nacionalna konferencija o kvalitetu; Maj 8-11, Kragujevac
Asocijacija za kvalitet i standardizaciju Srbije..
https://hdl.handle.net/21.15107/rcub_vinar_11274

Pavlović M, Kokunešoski M, Popović P, Kićević D. Određivanje četiri teška metala u različitim ambalažnim materijalima. in Festival kvaliteta : 34. Nacionalna konferencija o kvalitetu; Maj 8-11, Kragujevac. 2007;.
https://hdl.handle.net/21.15107/rcub_vinar_11274 .

Pavlović, Mirjana, Kokunešoski, Maja, Popović, Predrag, Kićević, Dušan, "Određivanje četiri teška metala u različitim ambalažnim materijalima" in Festival kvaliteta : 34. Nacionalna konferencija o kvalitetu; Maj 8-11, Kragujevac (2007),
https://hdl.handle.net/21.15107/rcub_vinar_11274 .

TY  - JOUR
AU  - Kićević, Dušan
AU  - Popović, Predrag
AU  - Kokunešoski, Maja
AU  - Alavantić, Dragan
PY  - 2005
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11269
T2  - Total Quality Management and Excellence
T1  - Testing methods and conformity assessment procedures for packaging and packaging waste
VL  - 33
IS  - 4
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11269
ER  - 

@article{
author = "Kićević, Dušan and Popović, Predrag and Kokunešoski, Maja and Alavantić, Dragan",
year = "2005",
journal = "Total Quality Management and Excellence",
title = "Testing methods and conformity assessment procedures for packaging and packaging waste",
volume = "33",
number = "4",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11269"
}

Kićević, D., Popović, P., Kokunešoski, M.,& Alavantić, D.. (2005). Testing methods and conformity assessment procedures for packaging and packaging waste. in Total Quality Management and Excellence, 33(4).
https://hdl.handle.net/21.15107/rcub_vinar_11269

Kićević D, Popović P, Kokunešoski M, Alavantić D. Testing methods and conformity assessment procedures for packaging and packaging waste. in Total Quality Management and Excellence. 2005;33(4).
https://hdl.handle.net/21.15107/rcub_vinar_11269 .

Kićević, Dušan, Popović, Predrag, Kokunešoski, Maja, Alavantić, Dragan, "Testing methods and conformity assessment procedures for packaging and packaging waste" in Total Quality Management and Excellence, 33, no. 4 (2005),
https://hdl.handle.net/21.15107/rcub_vinar_11269 .

TY  - JOUR
AU  - Kokunešoski, Maja
AU  - Kićević, Dušan
AU  - Popović, Predrag
AU  - Alavantić, Dragan
PY  - 2005
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11270
T2  - Kvalitet
T1  - Analiza zahteva Evropskih propisa i standarda za ambalažu i ambalažni otpad
VL  - 7-8
SP  - 35
EP  - 39
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11270
ER  - 

@article{
author = "Kokunešoski, Maja and Kićević, Dušan and Popović, Predrag and Alavantić, Dragan",
year = "2005",
journal = "Kvalitet",
title = "Analiza zahteva Evropskih propisa i standarda za ambalažu i ambalažni otpad",
volume = "7-8",
pages = "35-39",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11270"
}

Kokunešoski, M., Kićević, D., Popović, P.,& Alavantić, D.. (2005). Analiza zahteva Evropskih propisa i standarda za ambalažu i ambalažni otpad. in Kvalitet, 7-8, 35-39.
https://hdl.handle.net/21.15107/rcub_vinar_11270

Kokunešoski M, Kićević D, Popović P, Alavantić D. Analiza zahteva Evropskih propisa i standarda za ambalažu i ambalažni otpad. in Kvalitet. 2005;7-8:35-39.
https://hdl.handle.net/21.15107/rcub_vinar_11270 .

Kokunešoski, Maja, Kićević, Dušan, Popović, Predrag, Alavantić, Dragan, "Analiza zahteva Evropskih propisa i standarda za ambalažu i ambalažni otpad" in Kvalitet, 7-8 (2005):35-39,
https://hdl.handle.net/21.15107/rcub_vinar_11270 .

TY  - JOUR
AU  - Lazić, MS
AU  - Simović, Kornelija
AU  - Mišković-Stanković, Vesna B.
AU  - Jovanic, P
AU  - Kićević, Dušan M.
PY  - 2004
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2759
AB  - The influence of the deposition parameters on the porosity of thin alumina films electrophoretically deposited on steel from aqueous suspensions was investigated. The effects of the applied voltage, deposition time, suspension temperature and the solid content of the aqueous suspension on the porosity of the obtained alumina films have been determined using optical microscopy coupled with image analysis. It was shown that the lowest film porosity was obtained from a suspension containing 20 wt.% alumina powder at the lowest applied voltage (30 V), for a longer deposition time (10 min) using a suspension temperature of 30 degreesC. This behavior can be explained by the smaller amount of hydrogen evolved on the cathode during the electrophoretic deposition process.
T2  - Journal of the Serbian Chemical Society
T1  - The influence of the deposition parameters on the porosity of thin alumina films on steel
VL  - 69
IS  - 3
SP  - 239
EP  - 249
DO  - 10.2298/JSC0403239L
ER  - 

@article{
author = "Lazić, MS and Simović, Kornelija and Mišković-Stanković, Vesna B. and Jovanic, P and Kićević, Dušan M.",
year = "2004",
abstract = "The influence of the deposition parameters on the porosity of thin alumina films electrophoretically deposited on steel from aqueous suspensions was investigated. The effects of the applied voltage, deposition time, suspension temperature and the solid content of the aqueous suspension on the porosity of the obtained alumina films have been determined using optical microscopy coupled with image analysis. It was shown that the lowest film porosity was obtained from a suspension containing 20 wt.% alumina powder at the lowest applied voltage (30 V), for a longer deposition time (10 min) using a suspension temperature of 30 degreesC. This behavior can be explained by the smaller amount of hydrogen evolved on the cathode during the electrophoretic deposition process.",
journal = "Journal of the Serbian Chemical Society",
title = "The influence of the deposition parameters on the porosity of thin alumina films on steel",
volume = "69",
number = "3",
pages = "239-249",
doi = "10.2298/JSC0403239L"
}

Lazić, M., Simović, K., Mišković-Stanković, V. B., Jovanic, P.,& Kićević, D. M.. (2004). The influence of the deposition parameters on the porosity of thin alumina films on steel. in Journal of the Serbian Chemical Society, 69(3), 239-249.
https://doi.org/10.2298/JSC0403239L

Lazić M, Simović K, Mišković-Stanković VB, Jovanic P, Kićević DM. The influence of the deposition parameters on the porosity of thin alumina films on steel. in Journal of the Serbian Chemical Society. 2004;69(3):239-249.
doi:10.2298/JSC0403239L .

Lazić, MS, Simović, Kornelija, Mišković-Stanković, Vesna B., Jovanic, P, Kićević, Dušan M., "The influence of the deposition parameters on the porosity of thin alumina films on steel" in Journal of the Serbian Chemical Society, 69, no. 3 (2004):239-249,
https://doi.org/10.2298/JSC0403239L . .

TY  - CONF
AU  - Kokunešoski, Maja
AU  - Kićević, Dušan
PY  - 2003
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11414
C3  - XLI savetovanje Srpskog hemijskog društva : izvodi radova
T1  - Uticaj akrilata kao veziva na svojstva i mašinsku obradljivost otpresaka od Al2O3
T1  - Influence of acrylate as a binder on characteristics and machinability green pressed parts of Al2O3
SP  - 129
EP  - 129
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11414
ER  - 

@conference{
author = "Kokunešoski, Maja and Kićević, Dušan",
year = "2003",
journal = "XLI savetovanje Srpskog hemijskog društva : izvodi radova",
title = "Uticaj akrilata kao veziva na svojstva i mašinsku obradljivost otpresaka od Al2O3, Influence of acrylate as a binder on characteristics and machinability green pressed parts of Al2O3",
pages = "129-129",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11414"
}

Kokunešoski, M.,& Kićević, D.. (2003). Uticaj akrilata kao veziva na svojstva i mašinsku obradljivost otpresaka od Al2O3. in XLI savetovanje Srpskog hemijskog društva : izvodi radova, 129-129.
https://hdl.handle.net/21.15107/rcub_vinar_11414

Kokunešoski M, Kićević D. Uticaj akrilata kao veziva na svojstva i mašinsku obradljivost otpresaka od Al2O3. in XLI savetovanje Srpskog hemijskog društva : izvodi radova. 2003;:129-129.
https://hdl.handle.net/21.15107/rcub_vinar_11414 .

Kokunešoski, Maja, Kićević, Dušan, "Uticaj akrilata kao veziva na svojstva i mašinsku obradljivost otpresaka od Al2O3" in XLI savetovanje Srpskog hemijskog društva : izvodi radova (2003):129-129,
https://hdl.handle.net/21.15107/rcub_vinar_11414 .

TY  - CONF
AU  - Kokunešoski, Maja
AU  - Kićević, Dušan
AU  - Marković, Dušan
PY  - 2003
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11412
AB  - Machining of green pressed parts of engineering ceramics is possible if suitable binder, whisch improves the amchinability of green parts, is used. Acrylics used as a binder improved the mechanical properties of green pressed parts. The possibility of using the methyl methacrylate (monomer and polymer) as a bunder in multicomponent mixture of alumina and organic additives (plasticizers and binders) was investigated in this work, with the aim to improve machinability of green parts. Green density of pressed parts depends on applied pressure. Higher green density indicates better packing of alumina powder and results in less shrinkage during heating. The main intention was to improve machinability of green parts pressed at the optimal level of pressing pressure. [from Introduction]
PB  - Belgrade : Serbian Academy of Sciences and Arts
PB  - Belgrade : International institute for the science of sintering
PB  - Čačak : Technical faculty
C3  - Science of sintering: current problems and new trends
T1  - Machining of Alumina Ceramics with Acrylic Binders
SP  - 191
EP  - 196
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11412
ER  - 

@conference{
author = "Kokunešoski, Maja and Kićević, Dušan and Marković, Dušan",
year = "2003",
abstract = "Machining of green pressed parts of engineering ceramics is possible if suitable binder, whisch improves the amchinability of green parts, is used. Acrylics used as a binder improved the mechanical properties of green pressed parts. The possibility of using the methyl methacrylate (monomer and polymer) as a bunder in multicomponent mixture of alumina and organic additives (plasticizers and binders) was investigated in this work, with the aim to improve machinability of green parts. Green density of pressed parts depends on applied pressure. Higher green density indicates better packing of alumina powder and results in less shrinkage during heating. The main intention was to improve machinability of green parts pressed at the optimal level of pressing pressure. [from Introduction]",
publisher = "Belgrade : Serbian Academy of Sciences and Arts, Belgrade : International institute for the science of sintering, Čačak : Technical faculty",
journal = "Science of sintering: current problems and new trends",
title = "Machining of Alumina Ceramics with Acrylic Binders",
pages = "191-196",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11412"
}

Kokunešoski, M., Kićević, D.,& Marković, D.. (2003). Machining of Alumina Ceramics with Acrylic Binders. in Science of sintering: current problems and new trends
Belgrade : Serbian Academy of Sciences and Arts., 191-196.
https://hdl.handle.net/21.15107/rcub_vinar_11412

Kokunešoski M, Kićević D, Marković D. Machining of Alumina Ceramics with Acrylic Binders. in Science of sintering: current problems and new trends. 2003;:191-196.
https://hdl.handle.net/21.15107/rcub_vinar_11412 .

Kokunešoski, Maja, Kićević, Dušan, Marković, Dušan, "Machining of Alumina Ceramics with Acrylic Binders" in Science of sintering: current problems and new trends (2003):191-196,
https://hdl.handle.net/21.15107/rcub_vinar_11412 .

TY  - JOUR
AU  - Simović, Kornelija
AU  - Mišković-Stanković, Vesna B.
AU  - Kićević, Dušan M.
AU  - Jovanic, P
PY  - 2002
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2542
AB  - Alumina water suspensions have been prepared for thin alumina film deposition on steel. The type and quantity of deflocculant have been determined using zeta potential and viscosimetric measurements. The deposition was performed under the constant deposition voltage between 30 and 250 V. The morphology of electrodeposited alumina films was investigated using the optical microscopy coupled with image analysis, which enables the determination of pore number, percentage of film surface covered by pores and mean pore diameter, and scanning electron microscopy (SEM). It was shown that alumina films of the highest thickness and the lowest porosity can be formed at lower applied voltage and for longer deposition time. The minimum of alumina films porosity, obtained at the lowest deposition voltage of 30 V, can be explained by smaller amount of evolved hydrogen on the cathode during electrodeposition process. (C) 2002 Elsevier Science B.V. All rights reserved.
T2  - Colloids and Surfaces. A: Physicochemical and Engineering Aspects
T1  - Electrophoretic deposition of thin alumina films from water suspension
VL  - 209
IS  - 1
SP  - 47
EP  - 55
DO  - 10.1016/S0927-7757(02)00138-3
ER  - 

@article{
author = "Simović, Kornelija and Mišković-Stanković, Vesna B. and Kićević, Dušan M. and Jovanic, P",
year = "2002",
abstract = "Alumina water suspensions have been prepared for thin alumina film deposition on steel. The type and quantity of deflocculant have been determined using zeta potential and viscosimetric measurements. The deposition was performed under the constant deposition voltage between 30 and 250 V. The morphology of electrodeposited alumina films was investigated using the optical microscopy coupled with image analysis, which enables the determination of pore number, percentage of film surface covered by pores and mean pore diameter, and scanning electron microscopy (SEM). It was shown that alumina films of the highest thickness and the lowest porosity can be formed at lower applied voltage and for longer deposition time. The minimum of alumina films porosity, obtained at the lowest deposition voltage of 30 V, can be explained by smaller amount of evolved hydrogen on the cathode during electrodeposition process. (C) 2002 Elsevier Science B.V. All rights reserved.",
journal = "Colloids and Surfaces. A: Physicochemical and Engineering Aspects",
title = "Electrophoretic deposition of thin alumina films from water suspension",
volume = "209",
number = "1",
pages = "47-55",
doi = "10.1016/S0927-7757(02)00138-3"
}

Simović, K., Mišković-Stanković, V. B., Kićević, D. M.,& Jovanic, P.. (2002). Electrophoretic deposition of thin alumina films from water suspension. in Colloids and Surfaces. A: Physicochemical and Engineering Aspects, 209(1), 47-55.
https://doi.org/10.1016/S0927-7757(02)00138-3

Simović K, Mišković-Stanković VB, Kićević DM, Jovanic P. Electrophoretic deposition of thin alumina films from water suspension. in Colloids and Surfaces. A: Physicochemical and Engineering Aspects. 2002;209(1):47-55.
doi:10.1016/S0927-7757(02)00138-3 .

Simović, Kornelija, Mišković-Stanković, Vesna B., Kićević, Dušan M., Jovanic, P, "Electrophoretic deposition of thin alumina films from water suspension" in Colloids and Surfaces. A: Physicochemical and Engineering Aspects, 209, no. 1 (2002):47-55,
https://doi.org/10.1016/S0927-7757(02)00138-3 . .

TY  - CONF
AU  - Kokunešoski, Maja
AU  - Kićević, Dušan
AU  - Marković, D.
PY  - 2002
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11263
UR  - https://dais.sanu.ac.rs/handle/123456789/108
PB  - Belgrade : Institute of Technical Sciences of SASA; International Institute for the Science of Sintering; Serbian Academy of Sciences and Arts
C3  - Science of Sintering in the XXI Century : 10th World Round Table Conference on Sintering : book of abstracts; September 3-6, Belgrade
T1  - Processing of alumina ceramics with acrylate binders
SP  - 50
EP  - 51
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11263
ER  - 

@conference{
author = "Kokunešoski, Maja and Kićević, Dušan and Marković, D.",
year = "2002",
publisher = "Belgrade : Institute of Technical Sciences of SASA; International Institute for the Science of Sintering; Serbian Academy of Sciences and Arts",
journal = "Science of Sintering in the XXI Century : 10th World Round Table Conference on Sintering : book of abstracts; September 3-6, Belgrade",
title = "Processing of alumina ceramics with acrylate binders",
pages = "50-51",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11263"
}

Kokunešoski, M., Kićević, D.,& Marković, D.. (2002). Processing of alumina ceramics with acrylate binders. in Science of Sintering in the XXI Century : 10th World Round Table Conference on Sintering : book of abstracts; September 3-6, Belgrade
Belgrade : Institute of Technical Sciences of SASA; International Institute for the Science of Sintering; Serbian Academy of Sciences and Arts., 50-51.
https://hdl.handle.net/21.15107/rcub_vinar_11263

Kokunešoski M, Kićević D, Marković D. Processing of alumina ceramics with acrylate binders. in Science of Sintering in the XXI Century : 10th World Round Table Conference on Sintering : book of abstracts; September 3-6, Belgrade. 2002;:50-51.
https://hdl.handle.net/21.15107/rcub_vinar_11263 .

Kokunešoski, Maja, Kićević, Dušan, Marković, D., "Processing of alumina ceramics with acrylate binders" in Science of Sintering in the XXI Century : 10th World Round Table Conference on Sintering : book of abstracts; September 3-6, Belgrade (2002):50-51,
https://hdl.handle.net/21.15107/rcub_vinar_11263 .

TY  - CONF
AU  - Kokunešoski, Maja
AU  - Marković, D.
AU  - Kićević, D.
PY  - 2001
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11407
C3  - School of Ceramics - IV Students' Meeting
T1  - Primena akrilata kao veziva u procesiranju Al2O3 tehničke keramike
T1  - Application of acrylate as a binder for processing of technical alumina ceramics
SP  - 56
EP  - 57
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11407
ER  - 

@conference{
author = "Kokunešoski, Maja and Marković, D. and Kićević, D.",
year = "2001",
journal = "School of Ceramics - IV Students' Meeting",
title = "Primena akrilata kao veziva u procesiranju Al2O3 tehničke keramike, Application of acrylate as a binder for processing of technical alumina ceramics",
pages = "56-57",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11407"
}

Kokunešoski, M., Marković, D.,& Kićević, D.. (2001). Primena akrilata kao veziva u procesiranju Al2O3 tehničke keramike. in School of Ceramics - IV Students' Meeting, 56-57.
https://hdl.handle.net/21.15107/rcub_vinar_11407

Kokunešoski M, Marković D, Kićević D. Primena akrilata kao veziva u procesiranju Al2O3 tehničke keramike. in School of Ceramics - IV Students' Meeting. 2001;:56-57.
https://hdl.handle.net/21.15107/rcub_vinar_11407 .

Kokunešoski, Maja, Marković, D., Kićević, D., "Primena akrilata kao veziva u procesiranju Al2O3 tehničke keramike" in School of Ceramics - IV Students' Meeting (2001):56-57,
https://hdl.handle.net/21.15107/rcub_vinar_11407 .

TY  - CONF
AU  - Kokunešoski, Maja
AU  - Kićević, Dušan
AU  - Marković, D.
PY  - 2001
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11312
PB  - Belgrade : Materials Research Society of Serbia
C3  - Fourth Yugoslav materials research society conference YUCOMAT 2001 : Programme and the Book of Abstracts
T1  - Application of acrylic binder in processing of alumina technical ceramics
SP  - 8
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11312
ER  - 

@conference{
author = "Kokunešoski, Maja and Kićević, Dušan and Marković, D.",
year = "2001",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Fourth Yugoslav materials research society conference YUCOMAT 2001 : Programme and the Book of Abstracts",
title = "Application of acrylic binder in processing of alumina technical ceramics",
pages = "8",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11312"
}

Kokunešoski, M., Kićević, D.,& Marković, D.. (2001). Application of acrylic binder in processing of alumina technical ceramics. in Fourth Yugoslav materials research society conference YUCOMAT 2001 : Programme and the Book of Abstracts
Belgrade : Materials Research Society of Serbia., 8.
https://hdl.handle.net/21.15107/rcub_vinar_11312

Kokunešoski M, Kićević D, Marković D. Application of acrylic binder in processing of alumina technical ceramics. in Fourth Yugoslav materials research society conference YUCOMAT 2001 : Programme and the Book of Abstracts. 2001;:8.
https://hdl.handle.net/21.15107/rcub_vinar_11312 .

Kokunešoski, Maja, Kićević, Dušan, Marković, D., "Application of acrylic binder in processing of alumina technical ceramics" in Fourth Yugoslav materials research society conference YUCOMAT 2001 : Programme and the Book of Abstracts (2001):8,
https://hdl.handle.net/21.15107/rcub_vinar_11312 .

TY  - JOUR
AU  - Čerović, Ljiljana S.
AU  - Milonjić, Slobodan K.
AU  - Bahloul-Hourlier, D
AU  - Kićević, Dušan M.
PY  - 2000
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6303
AB  - A successful colloidal processing of ultrafine powders to produce high quality ceramic materials gives demand for stable, high degree particle dispersions. The stability of ceramic suspensions on the basis of SiC, Si3N4 and SiCN nanopowders in water and organic solvents (octane, benzene, toluene, benzyl alcohol and 1-octanole) was examined within 24 hours by means of screen sedimentation tests. Experimental results of the settling velocities were related to the calculated values of the total interaction potential energy between the particles interacting over the solvent molecules-the dispersion (van der Waals) attraction in case of organic liquids in the absence of dispersants, and a combination of dispersion attraction acid electrostatic forces in case of water, and finally to the physical properties of the used solvents.
T2  - Materials Science Forum
T1  - Dispersion stability of SiC, SiCN and Si3N4 ultrafine powders in aqueous and nonaqueous media
VL  - 352
SP  - 97
EP  - 104
UR  - https://hdl.handle.net/21.15107/rcub_vinar_6303
ER  - 

@article{
author = "Čerović, Ljiljana S. and Milonjić, Slobodan K. and Bahloul-Hourlier, D and Kićević, Dušan M.",
year = "2000",
abstract = "A successful colloidal processing of ultrafine powders to produce high quality ceramic materials gives demand for stable, high degree particle dispersions. The stability of ceramic suspensions on the basis of SiC, Si3N4 and SiCN nanopowders in water and organic solvents (octane, benzene, toluene, benzyl alcohol and 1-octanole) was examined within 24 hours by means of screen sedimentation tests. Experimental results of the settling velocities were related to the calculated values of the total interaction potential energy between the particles interacting over the solvent molecules-the dispersion (van der Waals) attraction in case of organic liquids in the absence of dispersants, and a combination of dispersion attraction acid electrostatic forces in case of water, and finally to the physical properties of the used solvents.",
journal = "Materials Science Forum",
title = "Dispersion stability of SiC, SiCN and Si3N4 ultrafine powders in aqueous and nonaqueous media",
volume = "352",
pages = "97-104",
url = "https://hdl.handle.net/21.15107/rcub_vinar_6303"
}

Čerović, L. S., Milonjić, S. K., Bahloul-Hourlier, D.,& Kićević, D. M.. (2000). Dispersion stability of SiC, SiCN and Si3N4 ultrafine powders in aqueous and nonaqueous media. in Materials Science Forum, 352, 97-104.
https://hdl.handle.net/21.15107/rcub_vinar_6303

Čerović LS, Milonjić SK, Bahloul-Hourlier D, Kićević DM. Dispersion stability of SiC, SiCN and Si3N4 ultrafine powders in aqueous and nonaqueous media. in Materials Science Forum. 2000;352:97-104.
https://hdl.handle.net/21.15107/rcub_vinar_6303 .

Čerović, Ljiljana S., Milonjić, Slobodan K., Bahloul-Hourlier, D, Kićević, Dušan M., "Dispersion stability of SiC, SiCN and Si3N4 ultrafine powders in aqueous and nonaqueous media" in Materials Science Forum, 352 (2000):97-104,
https://hdl.handle.net/21.15107/rcub_vinar_6303 .

TY  - JOUR
AU  - Mitkov, Mirjana V.
AU  - Janković, Drina
AU  - Kićević, Dušan M.
PY  - 1998
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6252
AB  - Metal-ceramic-intermetallic multilayered, laminar composites present an attractive group of materials offering a variety of combinations of constituent component properties. Processing of these composites is possible due to a considerable processing flexibility afforded by the powder metallurgy route. In the present paper, the possibility of obtaining laminar composite structures consisting of metal (Ni), ceramic (Al2O3) and intermetallic compound (Ni3Al) layers, has been described. Individual layers were prepared by different techniques. Laminar composites were obtained by hot pressing and standard sintering process.
T2  - Materials Science Forum
T1  - Microstructure and strength of solid state bonded Ni-Al2O3-Ni3Al laminates
VL  - 282-2
SP  - 233
EP  - 238
DO  - 10.4028/www.scientific.net/MSF.282-283.233
ER  - 

@article{
author = "Mitkov, Mirjana V. and Janković, Drina and Kićević, Dušan M.",
year = "1998",
abstract = "Metal-ceramic-intermetallic multilayered, laminar composites present an attractive group of materials offering a variety of combinations of constituent component properties. Processing of these composites is possible due to a considerable processing flexibility afforded by the powder metallurgy route. In the present paper, the possibility of obtaining laminar composite structures consisting of metal (Ni), ceramic (Al2O3) and intermetallic compound (Ni3Al) layers, has been described. Individual layers were prepared by different techniques. Laminar composites were obtained by hot pressing and standard sintering process.",
journal = "Materials Science Forum",
title = "Microstructure and strength of solid state bonded Ni-Al2O3-Ni3Al laminates",
volume = "282-2",
pages = "233-238",
doi = "10.4028/www.scientific.net/MSF.282-283.233"
}

Mitkov, M. V., Janković, D.,& Kićević, D. M.. (1998). Microstructure and strength of solid state bonded Ni-Al2O3-Ni3Al laminates. in Materials Science Forum, 282-2, 233-238.
https://doi.org/10.4028/www.scientific.net/MSF.282-283.233

Mitkov MV, Janković D, Kićević DM. Microstructure and strength of solid state bonded Ni-Al2O3-Ni3Al laminates. in Materials Science Forum. 1998;282-2:233-238.
doi:10.4028/www.scientific.net/MSF.282-283.233 .

Mitkov, Mirjana V., Janković, Drina, Kićević, Dušan M., "Microstructure and strength of solid state bonded Ni-Al2O3-Ni3Al laminates" in Materials Science Forum, 282-2 (1998):233-238,
https://doi.org/10.4028/www.scientific.net/MSF.282-283.233 . .

TY  - JOUR
AU  - Kićević, Dušan M.
AU  - Gašić, M.
AU  - Marković, D.
PY  - 1996
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2001
AB  - In this work the quantitative relations between the properties of sintered fused silica (density, mechanical propel-ties, cristobalite content) and slip preparation parameters as well as sintering conditions (milling balls material, temperature and rime of sintering) were established Multifactorial experimental design ,cas used in ol der to obtain rite respective mathematical al models. The response surfaces of these models were analyzed, together with correlations between the compressive and tensile strength and cristobalite content. it was established that the maximum values of mechanical properties for a given material were obtained with 6-8 vol.% of cristobalite in sintered samples.
T2  - Journal of the European Ceramic Society
T1  - A statistical analysis of the influence of processing conditions on the properties of fused silica
VL  - 16
IS  - 8
SP  - 857
EP  - 864
DO  - 10.1016/0955-2219(96)80453-5
ER  - 

@article{
author = "Kićević, Dušan M. and Gašić, M. and Marković, D.",
year = "1996",
abstract = "In this work the quantitative relations between the properties of sintered fused silica (density, mechanical propel-ties, cristobalite content) and slip preparation parameters as well as sintering conditions (milling balls material, temperature and rime of sintering) were established Multifactorial experimental design ,cas used in ol der to obtain rite respective mathematical al models. The response surfaces of these models were analyzed, together with correlations between the compressive and tensile strength and cristobalite content. it was established that the maximum values of mechanical properties for a given material were obtained with 6-8 vol.% of cristobalite in sintered samples.",
journal = "Journal of the European Ceramic Society",
title = "A statistical analysis of the influence of processing conditions on the properties of fused silica",
volume = "16",
number = "8",
pages = "857-864",
doi = "10.1016/0955-2219(96)80453-5"
}

Kićević, D. M., Gašić, M.,& Marković, D.. (1996). A statistical analysis of the influence of processing conditions on the properties of fused silica. in Journal of the European Ceramic Society, 16(8), 857-864.
https://doi.org/10.1016/0955-2219(96)80453-5

Kićević DM, Gašić M, Marković D. A statistical analysis of the influence of processing conditions on the properties of fused silica. in Journal of the European Ceramic Society. 1996;16(8):857-864.
doi:10.1016/0955-2219(96)80453-5 .

Kićević, Dušan M., Gašić, M., Marković, D., "A statistical analysis of the influence of processing conditions on the properties of fused silica" in Journal of the European Ceramic Society, 16, no. 8 (1996):857-864,
https://doi.org/10.1016/0955-2219(96)80453-5 . .