TY  - CONF
AU  - Jovanović, Aleksandar
AU  - Knežević, Nataša
AU  - Čutović, Natalija
AU  - Đolić, Maja
AU  - Prlainović, Nevena
AU  - Veličković, Zlate
AU  - Vuksanović, Marija M.
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10673
AB  - Management of waste polymers (polyethylene - PE and polypropylene - PP) represents one of the major obstacles in the field of environmental protection, which demands a most efficient and eco-friendly technological solution. Due to the high use of various plastic materials, the amount of landfilled or dissipated plastic waste is continuously growing. Therefore, this paper examines the possibilities of recycling these polymers, alongside obtaining granules of similar or advanced physico-mechanical characteristics to the commercially available ones. The applied technology consists of several consecutive processes (collecting, grinding, washing and extruding) where the obtained materials can later be incorporated into widely applicable products, such as foils, bin liners, bags, among others. In this way, high-quality products with great market potential are obtained, which will consequently contribute to lower extraction and less depletion of natural resources. Thus major problems may be solved optimally, consolidating the efficiency of improved eco-friendly technologies which is in line with environmental protection and sustainable waste management.
PB  - University of Belgrade, Technical Faculty in Bor
C3  - EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings
T1  - Improved technology for production of PE and PP regranulates
SP  - 186
EP  - 189
UR  - https://hdl.handle.net/21.15107/rcub_vinar_10673
ER  - 

@conference{
author = "Jovanović, Aleksandar and Knežević, Nataša and Čutović, Natalija and Đolić, Maja and Prlainović, Nevena and Veličković, Zlate and Vuksanović, Marija M.",
year = "2022",
abstract = "Management of waste polymers (polyethylene - PE and polypropylene - PP) represents one of the major obstacles in the field of environmental protection, which demands a most efficient and eco-friendly technological solution. Due to the high use of various plastic materials, the amount of landfilled or dissipated plastic waste is continuously growing. Therefore, this paper examines the possibilities of recycling these polymers, alongside obtaining granules of similar or advanced physico-mechanical characteristics to the commercially available ones. The applied technology consists of several consecutive processes (collecting, grinding, washing and extruding) where the obtained materials can later be incorporated into widely applicable products, such as foils, bin liners, bags, among others. In this way, high-quality products with great market potential are obtained, which will consequently contribute to lower extraction and less depletion of natural resources. Thus major problems may be solved optimally, consolidating the efficiency of improved eco-friendly technologies which is in line with environmental protection and sustainable waste management.",
publisher = "University of Belgrade, Technical Faculty in Bor",
journal = "EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings",
title = "Improved technology for production of PE and PP regranulates",
pages = "186-189",
url = "https://hdl.handle.net/21.15107/rcub_vinar_10673"
}

Jovanović, A., Knežević, N., Čutović, N., Đolić, M., Prlainović, N., Veličković, Z.,& Vuksanović, M. M.. (2022). Improved technology for production of PE and PP regranulates. in EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings
University of Belgrade, Technical Faculty in Bor., 186-189.
https://hdl.handle.net/21.15107/rcub_vinar_10673

Jovanović A, Knežević N, Čutović N, Đolić M, Prlainović N, Veličković Z, Vuksanović MM. Improved technology for production of PE and PP regranulates. in EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings. 2022;:186-189.
https://hdl.handle.net/21.15107/rcub_vinar_10673 .

Jovanović, Aleksandar, Knežević, Nataša, Čutović, Natalija, Đolić, Maja, Prlainović, Nevena, Veličković, Zlate, Vuksanović, Marija M., "Improved technology for production of PE and PP regranulates" in EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings (2022):186-189,
https://hdl.handle.net/21.15107/rcub_vinar_10673 .

TY  - CONF
AU  - Čutović, Natalija
AU  - Vuksanović, Marija M.
AU  - Milošević, Milena
AU  - Bugarčić, Mladen
AU  - Bošnjaković, Jovana
AU  - Gržetić, Jelena
AU  - Marinković, Aleksandar
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10674
AB  - Due to the increasing use and widespread of plastics, poly (ethylene terephthalate) (PET) and poly (vinyl chloride) (PVC) are becoming one of the major threats to the environment. The aim of this paper is obtaining plasticizers from recycled PET, and hot/cold mixing thereof with PVC to produce new materials. Plasticizer was obtained from PET using ethylene glycol (EG) in the presence of catalyst FASCAT 4100, followed by treatment with maleic anhydride and finally 2-ethylhexanol (2-EtHex). The obtained glycolysate and plasticizer, individually or mixtures thereof, were used for the production of polygranulates based on waste PVC in order to obtain an expanded mass of homogenized PVC with glycolysate/plasticizer. The abovementioned procedures and test results for the regranulates and products indicate that the proposed technology offers a solution to the problem of waste PET and PVC through transesterification in order to obtain plasticizer based on PET and EG, called 2-EtHex/MA/РG/PET/EG/MA/2-EtHex used in the processing of PVC waste and in regranulate. The obtained regranulates are further processed by injection molding or extrusion into commercial products such as slippers, footwear, boots, garden hoses, mats, floor mats, etc.
PB  - University of Belgrade, Technical Faculty in Bor
C3  - EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings
T1  - Recycled Poly(ethylene Terephthalate) Based-Plasticizer for PVC Regranulates Production
SP  - 452
EP  - 458
UR  - https://hdl.handle.net/21.15107/rcub_vinar_10674
ER  - 

@conference{
author = "Čutović, Natalija and Vuksanović, Marija M. and Milošević, Milena and Bugarčić, Mladen and Bošnjaković, Jovana and Gržetić, Jelena and Marinković, Aleksandar",
year = "2022",
abstract = "Due to the increasing use and widespread of plastics, poly (ethylene terephthalate) (PET) and poly (vinyl chloride) (PVC) are becoming one of the major threats to the environment. The aim of this paper is obtaining plasticizers from recycled PET, and hot/cold mixing thereof with PVC to produce new materials. Plasticizer was obtained from PET using ethylene glycol (EG) in the presence of catalyst FASCAT 4100, followed by treatment with maleic anhydride and finally 2-ethylhexanol (2-EtHex). The obtained glycolysate and plasticizer, individually or mixtures thereof, were used for the production of polygranulates based on waste PVC in order to obtain an expanded mass of homogenized PVC with glycolysate/plasticizer. The abovementioned procedures and test results for the regranulates and products indicate that the proposed technology offers a solution to the problem of waste PET and PVC through transesterification in order to obtain plasticizer based on PET and EG, called 2-EtHex/MA/РG/PET/EG/MA/2-EtHex used in the processing of PVC waste and in regranulate. The obtained regranulates are further processed by injection molding or extrusion into commercial products such as slippers, footwear, boots, garden hoses, mats, floor mats, etc.",
publisher = "University of Belgrade, Technical Faculty in Bor",
journal = "EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings",
title = "Recycled Poly(ethylene Terephthalate) Based-Plasticizer for PVC Regranulates Production",
pages = "452-458",
url = "https://hdl.handle.net/21.15107/rcub_vinar_10674"
}

Čutović, N., Vuksanović, M. M., Milošević, M., Bugarčić, M., Bošnjaković, J., Gržetić, J.,& Marinković, A.. (2022). Recycled Poly(ethylene Terephthalate) Based-Plasticizer for PVC Regranulates Production. in EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings
University of Belgrade, Technical Faculty in Bor., 452-458.
https://hdl.handle.net/21.15107/rcub_vinar_10674

Čutović N, Vuksanović MM, Milošević M, Bugarčić M, Bošnjaković J, Gržetić J, Marinković A. Recycled Poly(ethylene Terephthalate) Based-Plasticizer for PVC Regranulates Production. in EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings. 2022;:452-458.
https://hdl.handle.net/21.15107/rcub_vinar_10674 .

Čutović, Natalija, Vuksanović, Marija M., Milošević, Milena, Bugarčić, Mladen, Bošnjaković, Jovana, Gržetić, Jelena, Marinković, Aleksandar, "Recycled Poly(ethylene Terephthalate) Based-Plasticizer for PVC Regranulates Production" in EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings (2022):452-458,
https://hdl.handle.net/21.15107/rcub_vinar_10674 .