TY  - JOUR
AU  - Anićijević, Vladan J.
AU  - Tasić, Tamara
AU  - Milanković, Vedran
AU  - Breitenbach, Stefan
AU  - Unterweger, Christoph
AU  - Fürst, Christian
AU  - Bajuk-Bogdanović, Danica V.
AU  - Pašti, Igor A.
AU  - Lazarević-Pašti, Tamara
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10751
AB  - Growing pollution is making it necessary to find new strategies and materials for the removal of undesired compounds from the environment. Adsorption is still one of the simplest and most efficient routes for the remediation of air, soil, and water. However, the choice of adsorbent for a given application ultimately depends on its performance assessment results. Here, we show that the uptake of and capacity for dimethoate adsorption by different viscose-derived (activated) carbons strongly depend on the adsorbent dose applied in the adsorption measurements. The specific surface areas of the investigated materials varied across a wide range from 264 m2 g−1 to 2833 m2 g−1. For a dimethoate concentration of 5 × 10−4 mol L−1 and a high adsorbent dose of 10 mg mL−1, the adsorption capacities were all below 15 mg g−1. In the case of high-surface-area activated carbons, the uptakes were almost 100% under identical conditions. However, when the adsorbent dose was reduced to 0.01 mg mL−1, uptake was significantly reduced, but adsorption capacities as high as 1280 mg g−1 were obtained. Further, adsorption capacities were linked to adsorbents’ physical and chemical properties (specific surface area, pore size distribution, chemical composition), and thermodynamic parameters for the adsorption process were evaluated. Based on the Gibbs free energy of the adsorption process, it can be suggested that physisorption was operative for all studied adsorbents. Finally, we suggest that a proper comparison of different adsorbents requires standardization of the protocols used to evaluate pollutant uptakes and adsorption capacities.
T2  - International Journal of Environmental Research and Public Health
T1  - How Well Do Our Adsorbents Actually Perform?—The Case of Dimethoate Removal Using Viscose Fiber-Derived Carbons
VL  - 20
IS  - 5
SP  - 4553
DO  - 10.3390/ijerph20054553
ER  - 

@article{
author = "Anićijević, Vladan J. and Tasić, Tamara and Milanković, Vedran and Breitenbach, Stefan and Unterweger, Christoph and Fürst, Christian and Bajuk-Bogdanović, Danica V. and Pašti, Igor A. and Lazarević-Pašti, Tamara",
year = "2023",
abstract = "Growing pollution is making it necessary to find new strategies and materials for the removal of undesired compounds from the environment. Adsorption is still one of the simplest and most efficient routes for the remediation of air, soil, and water. However, the choice of adsorbent for a given application ultimately depends on its performance assessment results. Here, we show that the uptake of and capacity for dimethoate adsorption by different viscose-derived (activated) carbons strongly depend on the adsorbent dose applied in the adsorption measurements. The specific surface areas of the investigated materials varied across a wide range from 264 m2 g−1 to 2833 m2 g−1. For a dimethoate concentration of 5 × 10−4 mol L−1 and a high adsorbent dose of 10 mg mL−1, the adsorption capacities were all below 15 mg g−1. In the case of high-surface-area activated carbons, the uptakes were almost 100% under identical conditions. However, when the adsorbent dose was reduced to 0.01 mg mL−1, uptake was significantly reduced, but adsorption capacities as high as 1280 mg g−1 were obtained. Further, adsorption capacities were linked to adsorbents’ physical and chemical properties (specific surface area, pore size distribution, chemical composition), and thermodynamic parameters for the adsorption process were evaluated. Based on the Gibbs free energy of the adsorption process, it can be suggested that physisorption was operative for all studied adsorbents. Finally, we suggest that a proper comparison of different adsorbents requires standardization of the protocols used to evaluate pollutant uptakes and adsorption capacities.",
journal = "International Journal of Environmental Research and Public Health",
title = "How Well Do Our Adsorbents Actually Perform?—The Case of Dimethoate Removal Using Viscose Fiber-Derived Carbons",
volume = "20",
number = "5",
pages = "4553",
doi = "10.3390/ijerph20054553"
}

Anićijević, V. J., Tasić, T., Milanković, V., Breitenbach, S., Unterweger, C., Fürst, C., Bajuk-Bogdanović, D. V., Pašti, I. A.,& Lazarević-Pašti, T.. (2023). How Well Do Our Adsorbents Actually Perform?—The Case of Dimethoate Removal Using Viscose Fiber-Derived Carbons. in International Journal of Environmental Research and Public Health, 20(5), 4553.
https://doi.org/10.3390/ijerph20054553

Anićijević VJ, Tasić T, Milanković V, Breitenbach S, Unterweger C, Fürst C, Bajuk-Bogdanović DV, Pašti IA, Lazarević-Pašti T. How Well Do Our Adsorbents Actually Perform?—The Case of Dimethoate Removal Using Viscose Fiber-Derived Carbons. in International Journal of Environmental Research and Public Health. 2023;20(5):4553.
doi:10.3390/ijerph20054553 .

Anićijević, Vladan J., Tasić, Tamara, Milanković, Vedran, Breitenbach, Stefan, Unterweger, Christoph, Fürst, Christian, Bajuk-Bogdanović, Danica V., Pašti, Igor A., Lazarević-Pašti, Tamara, "How Well Do Our Adsorbents Actually Perform?—The Case of Dimethoate Removal Using Viscose Fiber-Derived Carbons" in International Journal of Environmental Research and Public Health, 20, no. 5 (2023):4553,
https://doi.org/10.3390/ijerph20054553 . .

TY  - JOUR
AU  - Tasić, Tamara
AU  - Milanković, Vedran
AU  - Batalović, Katarina
AU  - Breitenbach, Stefan
AU  - Unterweger, Christoph
AU  - Fürst, Christian
AU  - Pašti, Igor A.
AU  - Lazarević-Pašti, Tamara
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11217
AB  - The increasing usage of pesticides to boost food production inevitably leads to their presence in food samples, requiring the development of efficient methods for their removal. Here, we show that carefully tuned viscose-derived activated carbon fibers can be used for malathion and chlorpyrifos removal from liquid samples, even in complex matrices such as lemon juice and mint ethanol extract. Adsorbents were produced using the Design of Experiments protocol for varying activation conditions (carbonization at 850 °C; activation temperature between 670 and 870 °C; activation time from 30 to 180 min; and CO2 flow rate from 10 to 80 L h−1) and characterized in terms of physical and chemical properties (SEM, EDX, BET, FTIR). Pesticide adsorption kinetics and thermodynamics were then addressed. It was shown that some of the developed adsorbents are also capable of the selective removal of chlorpyrifos in the presence of malathion. The selected materials were not affected by complex matrices of real samples. Moreover, the adsorbent can be regenerated at least five times without pronounced performance losses. We suggest that the adsorptive removal of food contaminants can effectively improve food safety and quality, unlike other methods currently in use, which negatively affect the nutritional value of food products. Finally, data-based models trained on well-characterized materials libraries can direct the synthesis of novel adsorbents for the desired application in food processing.
T2  - Foods
T1  - Application of Viscose-Based Porous Carbon Fibers in Food Processing—Malathion and Chlorpyrifos Removal
VL  - 12
IS  - 12
SP  - 2362
DO  - 10.3390/foods12122362
ER  - 

@article{
author = "Tasić, Tamara and Milanković, Vedran and Batalović, Katarina and Breitenbach, Stefan and Unterweger, Christoph and Fürst, Christian and Pašti, Igor A. and Lazarević-Pašti, Tamara",
year = "2023",
abstract = "The increasing usage of pesticides to boost food production inevitably leads to their presence in food samples, requiring the development of efficient methods for their removal. Here, we show that carefully tuned viscose-derived activated carbon fibers can be used for malathion and chlorpyrifos removal from liquid samples, even in complex matrices such as lemon juice and mint ethanol extract. Adsorbents were produced using the Design of Experiments protocol for varying activation conditions (carbonization at 850 °C; activation temperature between 670 and 870 °C; activation time from 30 to 180 min; and CO2 flow rate from 10 to 80 L h−1) and characterized in terms of physical and chemical properties (SEM, EDX, BET, FTIR). Pesticide adsorption kinetics and thermodynamics were then addressed. It was shown that some of the developed adsorbents are also capable of the selective removal of chlorpyrifos in the presence of malathion. The selected materials were not affected by complex matrices of real samples. Moreover, the adsorbent can be regenerated at least five times without pronounced performance losses. We suggest that the adsorptive removal of food contaminants can effectively improve food safety and quality, unlike other methods currently in use, which negatively affect the nutritional value of food products. Finally, data-based models trained on well-characterized materials libraries can direct the synthesis of novel adsorbents for the desired application in food processing.",
journal = "Foods",
title = "Application of Viscose-Based Porous Carbon Fibers in Food Processing—Malathion and Chlorpyrifos Removal",
volume = "12",
number = "12",
pages = "2362",
doi = "10.3390/foods12122362"
}

Tasić, T., Milanković, V., Batalović, K., Breitenbach, S., Unterweger, C., Fürst, C., Pašti, I. A.,& Lazarević-Pašti, T.. (2023). Application of Viscose-Based Porous Carbon Fibers in Food Processing—Malathion and Chlorpyrifos Removal. in Foods, 12(12), 2362.
https://doi.org/10.3390/foods12122362

Tasić T, Milanković V, Batalović K, Breitenbach S, Unterweger C, Fürst C, Pašti IA, Lazarević-Pašti T. Application of Viscose-Based Porous Carbon Fibers in Food Processing—Malathion and Chlorpyrifos Removal. in Foods. 2023;12(12):2362.
doi:10.3390/foods12122362 .

Tasić, Tamara, Milanković, Vedran, Batalović, Katarina, Breitenbach, Stefan, Unterweger, Christoph, Fürst, Christian, Pašti, Igor A., Lazarević-Pašti, Tamara, "Application of Viscose-Based Porous Carbon Fibers in Food Processing—Malathion and Chlorpyrifos Removal" in Foods, 12, no. 12 (2023):2362,
https://doi.org/10.3390/foods12122362 . .