Dramlić, Dragan M.

Link to this page

Authority KeyName Variants
1212e095-56c8-4796-88c0-2cb54ad93f11
  • Dramlić, Dragan M. (8)
Projects

Author's Bibliography

Modeling air concentration of fly ash in Belgrade, emitted from thermal power plants TNTA and TNTB

Nikezić, Dušan P.; Gršić, Zoran J.; Dramlić, Dragan M.; Dramlić, Stefan D.; Lončar, Boris B.; Dimović, Slavko

(2017)

TY  - JOUR
AU  - Nikezić, Dušan P.
AU  - Gršić, Zoran J.
AU  - Dramlić, Dragan M.
AU  - Dramlić, Stefan D.
AU  - Lončar, Boris B.
AU  - Dimović, Slavko
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1450
AB  - The aim of the study was to estimate if dust/fly ash emitted into the atmosphere from chimneys and the ash disposal sites of the thermal power plants Nikola Tesla A and B in Obrenovac could increase the concentration of PM10 in New Belgrade. TNTA and TNTB are close to Belgrade (population of 2.5 million) and it is important to estimate the amount of the pollution emitted into the atmosphere from these sources. The pollution from chimneys is estimated from yearly amounts of discharge, while the lifting of ash/coal dust was parameterized by the model. The used model is the straight-line Gaussian plume model written in the Fortran programming language. The first estimation was done using mathematical modeling for the idealized situation with prescribed winds and stability. The second estimation was done using the observed meteorological data for the whole year of 2009. With strong winds (over 40 km/h), dust will reach Belgrade in dozens of minutes, while during moderate winds (similar to 10-30 km/h), it would take about one hour to reach it. In these cases atmosphere is close to the neutral stability class. In case of weaker winds and stable atmosphere, the increase of air dust concentration in Belgrade would start after a few hours (6-10). Regarding the other two sources of pollution, coal handling piles and ash deposit sites, during strong winds ( GT 40 km/h) and neutral stability, fly ash would reach Belgrade in several dozen of minutes. (C) 2016 Published by Elsevier B.V. on behalf of Institution of Chemical Engineers.
T2  - Process Safety and Environmental Protection
T1  - Modeling air concentration of fly ash in Belgrade, emitted from thermal power plants TNTA and TNTB
VL  - 106
SP  - 274
EP  - 283
DO  - 10.1016/j.psep.2016.06.009
ER  - 
@article{
author = "Nikezić, Dušan P. and Gršić, Zoran J. and Dramlić, Dragan M. and Dramlić, Stefan D. and Lončar, Boris B. and Dimović, Slavko",
year = "2017",
abstract = "The aim of the study was to estimate if dust/fly ash emitted into the atmosphere from chimneys and the ash disposal sites of the thermal power plants Nikola Tesla A and B in Obrenovac could increase the concentration of PM10 in New Belgrade. TNTA and TNTB are close to Belgrade (population of 2.5 million) and it is important to estimate the amount of the pollution emitted into the atmosphere from these sources. The pollution from chimneys is estimated from yearly amounts of discharge, while the lifting of ash/coal dust was parameterized by the model. The used model is the straight-line Gaussian plume model written in the Fortran programming language. The first estimation was done using mathematical modeling for the idealized situation with prescribed winds and stability. The second estimation was done using the observed meteorological data for the whole year of 2009. With strong winds (over 40 km/h), dust will reach Belgrade in dozens of minutes, while during moderate winds (similar to 10-30 km/h), it would take about one hour to reach it. In these cases atmosphere is close to the neutral stability class. In case of weaker winds and stable atmosphere, the increase of air dust concentration in Belgrade would start after a few hours (6-10). Regarding the other two sources of pollution, coal handling piles and ash deposit sites, during strong winds ( GT 40 km/h) and neutral stability, fly ash would reach Belgrade in several dozen of minutes. (C) 2016 Published by Elsevier B.V. on behalf of Institution of Chemical Engineers.",
journal = "Process Safety and Environmental Protection",
title = "Modeling air concentration of fly ash in Belgrade, emitted from thermal power plants TNTA and TNTB",
volume = "106",
pages = "274-283",
doi = "10.1016/j.psep.2016.06.009"
}
Nikezić, D. P., Gršić, Z. J., Dramlić, D. M., Dramlić, S. D., Lončar, B. B.,& Dimović, S.. (2017). Modeling air concentration of fly ash in Belgrade, emitted from thermal power plants TNTA and TNTB. in Process Safety and Environmental Protection, 106, 274-283.
https://doi.org/10.1016/j.psep.2016.06.009
Nikezić DP, Gršić ZJ, Dramlić DM, Dramlić SD, Lončar BB, Dimović S. Modeling air concentration of fly ash in Belgrade, emitted from thermal power plants TNTA and TNTB. in Process Safety and Environmental Protection. 2017;106:274-283.
doi:10.1016/j.psep.2016.06.009 .
Nikezić, Dušan P., Gršić, Zoran J., Dramlić, Dragan M., Dramlić, Stefan D., Lončar, Boris B., Dimović, Slavko, "Modeling air concentration of fly ash in Belgrade, emitted from thermal power plants TNTA and TNTB" in Process Safety and Environmental Protection, 106 (2017):274-283,
https://doi.org/10.1016/j.psep.2016.06.009 . .
7
5
8

Preparation and characterization of bismuth germanium oxide (BGO) polymer composites

Brajovic, Ljiljana M.; Stojanović, Dušica B.; Mihailovic, Pedja; Marković, Smilja; Romčević, Maja J.; Mitrić, Miodrag; Lazović, Vladimir M.; Dramlić, Dragan M.; Petričević, Slobodan; Romčević, Nebojša Ž.

(2017)

TY  - JOUR
AU  - Brajovic, Ljiljana M.
AU  - Stojanović, Dušica B.
AU  - Mihailovic, Pedja
AU  - Marković, Smilja
AU  - Romčević, Maja J.
AU  - Mitrić, Miodrag
AU  - Lazović, Vladimir M.
AU  - Dramlić, Dragan M.
AU  - Petričević, Slobodan
AU  - Romčević, Nebojša Ž.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1380
AB  - Bismuth germanium oxide Bi12GeO20 (BGO) has very interesting electrical, optical and magnetic properties. In order to make devices based on this material more flexible, its powder was used for preparing polymer composites. This study reports investigation of the effects of using different solvents and polymers in preparation of BGO composite on the microstructural and optical behaviour of the resulting material. Preparation of such composites by a solution casting method is described. Poly (methyl methacrylate) (PMMA) and polystyrene (PS)) were used as matrix materials and acetone and chloroform as solvents. Their microstructure and the quality of BGO dispersion and deaggregation in polymer matrix were analyzed by SEM, Raman, XRD and optical spectroscopy. The influence of particle size distribution, their shapes, and concentration on the optical transmission is calculated based on Mie scattering theory and discussed, too. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Journal of Alloys and Compounds
T1  - Preparation and characterization of bismuth germanium oxide (BGO) polymer composites
VL  - 695
SP  - 841
EP  - 849
DO  - 10.1016/j.jallcom.2016.10.140
ER  - 
@article{
author = "Brajovic, Ljiljana M. and Stojanović, Dušica B. and Mihailovic, Pedja and Marković, Smilja and Romčević, Maja J. and Mitrić, Miodrag and Lazović, Vladimir M. and Dramlić, Dragan M. and Petričević, Slobodan and Romčević, Nebojša Ž.",
year = "2017",
abstract = "Bismuth germanium oxide Bi12GeO20 (BGO) has very interesting electrical, optical and magnetic properties. In order to make devices based on this material more flexible, its powder was used for preparing polymer composites. This study reports investigation of the effects of using different solvents and polymers in preparation of BGO composite on the microstructural and optical behaviour of the resulting material. Preparation of such composites by a solution casting method is described. Poly (methyl methacrylate) (PMMA) and polystyrene (PS)) were used as matrix materials and acetone and chloroform as solvents. Their microstructure and the quality of BGO dispersion and deaggregation in polymer matrix were analyzed by SEM, Raman, XRD and optical spectroscopy. The influence of particle size distribution, their shapes, and concentration on the optical transmission is calculated based on Mie scattering theory and discussed, too. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Journal of Alloys and Compounds",
title = "Preparation and characterization of bismuth germanium oxide (BGO) polymer composites",
volume = "695",
pages = "841-849",
doi = "10.1016/j.jallcom.2016.10.140"
}
Brajovic, L. M., Stojanović, D. B., Mihailovic, P., Marković, S., Romčević, M. J., Mitrić, M., Lazović, V. M., Dramlić, D. M., Petričević, S.,& Romčević, N. Ž.. (2017). Preparation and characterization of bismuth germanium oxide (BGO) polymer composites. in Journal of Alloys and Compounds, 695, 841-849.
https://doi.org/10.1016/j.jallcom.2016.10.140
Brajovic LM, Stojanović DB, Mihailovic P, Marković S, Romčević MJ, Mitrić M, Lazović VM, Dramlić DM, Petričević S, Romčević NŽ. Preparation and characterization of bismuth germanium oxide (BGO) polymer composites. in Journal of Alloys and Compounds. 2017;695:841-849.
doi:10.1016/j.jallcom.2016.10.140 .
Brajovic, Ljiljana M., Stojanović, Dušica B., Mihailovic, Pedja, Marković, Smilja, Romčević, Maja J., Mitrić, Miodrag, Lazović, Vladimir M., Dramlić, Dragan M., Petričević, Slobodan, Romčević, Nebojša Ž., "Preparation and characterization of bismuth germanium oxide (BGO) polymer composites" in Journal of Alloys and Compounds, 695 (2017):841-849,
https://doi.org/10.1016/j.jallcom.2016.10.140 . .
4
4
4

Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties

Kovačević, Aleksander; Ristić-Đurović, Jasna L.; Lekic, Marina; Hadžić, Branka B.; Abudagel, Giuma Saleh Isa; Petričević, Slobodan; Mihailovic, Pedja; Matović, Branko; Dramlić, Dragan M.; Brajovic, Ljiljana M.; Romčević, Nebojša Ž.

(2016)

TY  - JOUR
AU  - Kovačević, Aleksander
AU  - Ristić-Đurović, Jasna L.
AU  - Lekic, Marina
AU  - Hadžić, Branka B.
AU  - Abudagel, Giuma Saleh Isa
AU  - Petričević, Slobodan
AU  - Mihailovic, Pedja
AU  - Matović, Branko
AU  - Dramlić, Dragan M.
AU  - Brajovic, Ljiljana M.
AU  - Romčević, Nebojša Ž.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1235
AB  - High quality bismuth germanium oxide single crystals were irradiated by a femtosecond pulsed laser beam of increasing power. Analyses performed on irradiated and unirradiated samples showed significant changes in transmittance, transmission spectra, sample color, Raman spectra, X-ray diffraction (XRD) pattern, Verdet constant, magneto-optical property, and absorption coefficient. After irradiation, the transmission spectra values increased whereas anisotropy detected in the transmission spectra of unirradiated samples disappeared. The change of color caused by irradiation was noticeable to the naked eye. The XRD measurements confirmed structural changes induced by laser irradiation, i.e., the laser-beam-incident side of the sample became almost amorphous, whereas the side opposite to the incident can be indexed to the Bi12GeO20 compound. Irradiation caused increase of Raman spectra peaks with the exception of crystal peaks of type E, which disappeared. The femtosecond pulsed laser irradiation can be used to improve bismuth germanium oxide single crystal optical properties. (C) 2016 Elsevier Ltd. All rights reserved.
T2  - Materials Research Bulletin
T1  - Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties
VL  - 83
SP  - 284
EP  - 289
DO  - 10.1016/j.materresbull.2016.06.023
ER  - 
@article{
author = "Kovačević, Aleksander and Ristić-Đurović, Jasna L. and Lekic, Marina and Hadžić, Branka B. and Abudagel, Giuma Saleh Isa and Petričević, Slobodan and Mihailovic, Pedja and Matović, Branko and Dramlić, Dragan M. and Brajovic, Ljiljana M. and Romčević, Nebojša Ž.",
year = "2016",
abstract = "High quality bismuth germanium oxide single crystals were irradiated by a femtosecond pulsed laser beam of increasing power. Analyses performed on irradiated and unirradiated samples showed significant changes in transmittance, transmission spectra, sample color, Raman spectra, X-ray diffraction (XRD) pattern, Verdet constant, magneto-optical property, and absorption coefficient. After irradiation, the transmission spectra values increased whereas anisotropy detected in the transmission spectra of unirradiated samples disappeared. The change of color caused by irradiation was noticeable to the naked eye. The XRD measurements confirmed structural changes induced by laser irradiation, i.e., the laser-beam-incident side of the sample became almost amorphous, whereas the side opposite to the incident can be indexed to the Bi12GeO20 compound. Irradiation caused increase of Raman spectra peaks with the exception of crystal peaks of type E, which disappeared. The femtosecond pulsed laser irradiation can be used to improve bismuth germanium oxide single crystal optical properties. (C) 2016 Elsevier Ltd. All rights reserved.",
journal = "Materials Research Bulletin",
title = "Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties",
volume = "83",
pages = "284-289",
doi = "10.1016/j.materresbull.2016.06.023"
}
Kovačević, A., Ristić-Đurović, J. L., Lekic, M., Hadžić, B. B., Abudagel, G. S. I., Petričević, S., Mihailovic, P., Matović, B., Dramlić, D. M., Brajovic, L. M.,& Romčević, N. Ž.. (2016). Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties. in Materials Research Bulletin, 83, 284-289.
https://doi.org/10.1016/j.materresbull.2016.06.023
Kovačević A, Ristić-Đurović JL, Lekic M, Hadžić BB, Abudagel GSI, Petričević S, Mihailovic P, Matović B, Dramlić DM, Brajovic LM, Romčević NŽ. Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties. in Materials Research Bulletin. 2016;83:284-289.
doi:10.1016/j.materresbull.2016.06.023 .
Kovačević, Aleksander, Ristić-Đurović, Jasna L., Lekic, Marina, Hadžić, Branka B., Abudagel, Giuma Saleh Isa, Petričević, Slobodan, Mihailovic, Pedja, Matović, Branko, Dramlić, Dragan M., Brajovic, Ljiljana M., Romčević, Nebojša Ž., "Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties" in Materials Research Bulletin, 83 (2016):284-289,
https://doi.org/10.1016/j.materresbull.2016.06.023 . .
5
4
6

Environmental Impact Assessment of the Nuclear Reactor in Vinca, Based on the Data on Emission of Radioactivity from the Literature - a Modeling Approach

Gršić, Zoran J.; Pavlović, Suncan; Arbutina, D.; Dramlić, Stefan D.; Dramlić, Dragan M.; Nikezić, Dušan P.; Dimović, Slavko; Kaljević, Jelica; Milincic, M.

(2015)

TY  - JOUR
AU  - Gršić, Zoran J.
AU  - Pavlović, Suncan
AU  - Arbutina, D.
AU  - Dramlić, Stefan D.
AU  - Dramlić, Dragan M.
AU  - Nikezić, Dušan P.
AU  - Dimović, Slavko
AU  - Kaljević, Jelica
AU  - Milincic, M.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/551
AB  - Research activities of Vinca Institite have been based on two heavy water research reactors: a 10 MW one, RA, and zero power, RB. Reactor RA was operational from 1962 to 1982. In 2010, spent fuel has been sent to the country of origin, and the reactor now is in decommissioning. During the operational phase of the reactor there were no recorded accidental releases into the environment, only operational ones. Results of the environmental impact assessment of the assumed emission of radionuclides from the ventilation of nuclear reactor RA in Vinca to the atmospheric boundary layer are presented in this paper. Evaluation was done by using the Gaussian straight-line diffusion model and taking into account characteristics of the reactor ventilation system, the assumed emission release of radioactivity (from the literature), site-specific meteorological data for six-year period and local topography around nuclear reactor, and corresponding dose factors for inventory of radionuclides. Based on the described approach, and assuming that the range of appropriate meteorological data for six year period for the application of described mathematical model is enough for this kind of analysis, it can be concluded that the nuclear reactor RA, in the course of its work from 1962 to 1982, had no influence on the surrounding environment through the air above regulatory limits.
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - Environmental Impact Assessment of the Nuclear Reactor in Vinca, Based on the Data on Emission of Radioactivity from the Literature - a Modeling Approach
VL  - 21
IS  - 1
SP  - 189
EP  - 199
DO  - 10.2298/CICEQ140219022G
ER  - 
@article{
author = "Gršić, Zoran J. and Pavlović, Suncan and Arbutina, D. and Dramlić, Stefan D. and Dramlić, Dragan M. and Nikezić, Dušan P. and Dimović, Slavko and Kaljević, Jelica and Milincic, M.",
year = "2015",
abstract = "Research activities of Vinca Institite have been based on two heavy water research reactors: a 10 MW one, RA, and zero power, RB. Reactor RA was operational from 1962 to 1982. In 2010, spent fuel has been sent to the country of origin, and the reactor now is in decommissioning. During the operational phase of the reactor there were no recorded accidental releases into the environment, only operational ones. Results of the environmental impact assessment of the assumed emission of radionuclides from the ventilation of nuclear reactor RA in Vinca to the atmospheric boundary layer are presented in this paper. Evaluation was done by using the Gaussian straight-line diffusion model and taking into account characteristics of the reactor ventilation system, the assumed emission release of radioactivity (from the literature), site-specific meteorological data for six-year period and local topography around nuclear reactor, and corresponding dose factors for inventory of radionuclides. Based on the described approach, and assuming that the range of appropriate meteorological data for six year period for the application of described mathematical model is enough for this kind of analysis, it can be concluded that the nuclear reactor RA, in the course of its work from 1962 to 1982, had no influence on the surrounding environment through the air above regulatory limits.",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "Environmental Impact Assessment of the Nuclear Reactor in Vinca, Based on the Data on Emission of Radioactivity from the Literature - a Modeling Approach",
volume = "21",
number = "1",
pages = "189-199",
doi = "10.2298/CICEQ140219022G"
}
Gršić, Z. J., Pavlović, S., Arbutina, D., Dramlić, S. D., Dramlić, D. M., Nikezić, D. P., Dimović, S., Kaljević, J.,& Milincic, M.. (2015). Environmental Impact Assessment of the Nuclear Reactor in Vinca, Based on the Data on Emission of Radioactivity from the Literature - a Modeling Approach. in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 21(1), 189-199.
https://doi.org/10.2298/CICEQ140219022G
Gršić ZJ, Pavlović S, Arbutina D, Dramlić SD, Dramlić DM, Nikezić DP, Dimović S, Kaljević J, Milincic M. Environmental Impact Assessment of the Nuclear Reactor in Vinca, Based on the Data on Emission of Radioactivity from the Literature - a Modeling Approach. in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2015;21(1):189-199.
doi:10.2298/CICEQ140219022G .
Gršić, Zoran J., Pavlović, Suncan, Arbutina, D., Dramlić, Stefan D., Dramlić, Dragan M., Nikezić, Dušan P., Dimović, Slavko, Kaljević, Jelica, Milincic, M., "Environmental Impact Assessment of the Nuclear Reactor in Vinca, Based on the Data on Emission of Radioactivity from the Literature - a Modeling Approach" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 21, no. 1 (2015):189-199,
https://doi.org/10.2298/CICEQ140219022G . .

Representativity of Air Quality Control in Limited Number of Grid Points

Gršić, Zoran J.; Dramlić, Dragan M.; Milutinovic, P.; Pavlović, Suncan; Arbutina, D.; Dramlić, Stefan D.; Kaljević, Jelica; Joksimović, Danijela; Miljević, Nada R.

(2014)

TY  - JOUR
AU  - Gršić, Zoran J.
AU  - Dramlić, Dragan M.
AU  - Milutinovic, P.
AU  - Pavlović, Suncan
AU  - Arbutina, D.
AU  - Dramlić, Stefan D.
AU  - Kaljević, Jelica
AU  - Joksimović, Danijela
AU  - Miljević, Nada R.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5948
AB  - In this study, we point to loss of accuracy in representing a field of air pollution concentration due to reduction of number of monitoring points or changes in their location. Using a Gaussian-type diffusion model, a high resolution concentration field was generated from 17 points representing the actual distribution of possible pollution sources. The starting grid consisted of 90 601 points. Then we reduced number of points by two orders of magnitude, forming the grid of 961 points. After that, the second reduction to 36 points was performed, still forming a regular grid. Finally, we had 16 points whose positions are in a qualitative agreement with the actual distribution of sampling stations in the area.
T2  - Journal of Environmental Protection and Ecology
T1  - Representativity of Air Quality Control in Limited Number of Grid Points
VL  - 15
IS  - 1
SP  - 1
EP  - 6
UR  - https://hdl.handle.net/21.15107/rcub_vinar_5948
ER  - 
@article{
author = "Gršić, Zoran J. and Dramlić, Dragan M. and Milutinovic, P. and Pavlović, Suncan and Arbutina, D. and Dramlić, Stefan D. and Kaljević, Jelica and Joksimović, Danijela and Miljević, Nada R.",
year = "2014",
abstract = "In this study, we point to loss of accuracy in representing a field of air pollution concentration due to reduction of number of monitoring points or changes in their location. Using a Gaussian-type diffusion model, a high resolution concentration field was generated from 17 points representing the actual distribution of possible pollution sources. The starting grid consisted of 90 601 points. Then we reduced number of points by two orders of magnitude, forming the grid of 961 points. After that, the second reduction to 36 points was performed, still forming a regular grid. Finally, we had 16 points whose positions are in a qualitative agreement with the actual distribution of sampling stations in the area.",
journal = "Journal of Environmental Protection and Ecology",
title = "Representativity of Air Quality Control in Limited Number of Grid Points",
volume = "15",
number = "1",
pages = "1-6",
url = "https://hdl.handle.net/21.15107/rcub_vinar_5948"
}
Gršić, Z. J., Dramlić, D. M., Milutinovic, P., Pavlović, S., Arbutina, D., Dramlić, S. D., Kaljević, J., Joksimović, D.,& Miljević, N. R.. (2014). Representativity of Air Quality Control in Limited Number of Grid Points. in Journal of Environmental Protection and Ecology, 15(1), 1-6.
https://hdl.handle.net/21.15107/rcub_vinar_5948
Gršić ZJ, Dramlić DM, Milutinovic P, Pavlović S, Arbutina D, Dramlić SD, Kaljević J, Joksimović D, Miljević NR. Representativity of Air Quality Control in Limited Number of Grid Points. in Journal of Environmental Protection and Ecology. 2014;15(1):1-6.
https://hdl.handle.net/21.15107/rcub_vinar_5948 .
Gršić, Zoran J., Dramlić, Dragan M., Milutinovic, P., Pavlović, Suncan, Arbutina, D., Dramlić, Stefan D., Kaljević, Jelica, Joksimović, Danijela, Miljević, Nada R., "Representativity of Air Quality Control in Limited Number of Grid Points" in Journal of Environmental Protection and Ecology, 15, no. 1 (2014):1-6,
https://hdl.handle.net/21.15107/rcub_vinar_5948 .
7

System for Automatically Preventing the Raising of Ash from Dedicated Landfills

Milutinovic, Predrag; Gršić, Zoran J.; Živković, Marija M.; Dramlić, Dragan M.; Velikic, Zoran; Dramlić, Stefan D.

(2012)

TY  - JOUR
AU  - Milutinovic, Predrag
AU  - Gršić, Zoran J.
AU  - Živković, Marija M.
AU  - Dramlić, Dragan M.
AU  - Velikic, Zoran
AU  - Dramlić, Stefan D.
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5383
AB  - The paper presents a system for automatic prevention of raising of ashes from dedicated landfills based on a simple mathematical model which has modest entry requirements for meteorological data. Such an approach is efficient enough and enables fast information retrieval, Le., zones with different concentrations of dust in the air, enabling quick start of counter measures to reduce emissions of ashes into the air. The system hardware consists of an automatic weather station, set of meters that determine moisture of ash, set of remotely managed sprinklers, computers, microprocessor and microcontroller based elements for the local acquisition and management of the executive elements and modules for wireless data transfer. An original software application for the system management has been developed. Within the application there is a module that allows entering of all data necessary to configure the system, as well as data about sensors and sprinklers. Based on the meteorological input data, measured moisture content of the ashes, and on the basis of determined functional dependencies, special software module operates sprinklers for soaking the surfaces from which the ashes is emitted into the air, in order to eliminate these emissions. The system, based on the developed mathematical model, predicts the propagation of ashes through the air, as well as dry and wet deposition, in real-time. The system automatically stores all the data relevant to the future analyses and reporting. The system is designed and implemented as modular and open. A custom developed graphical user interface serves as Man-Machine Interface (MMI). By using the TCP/IP connection it could be easily connected with the other information systems.
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - System for Automatically Preventing the Raising of Ash from Dedicated Landfills
VL  - 18
IS  - 4
SP  - 681
EP  - 692
DO  - 10.2298/CICEQ120228115M
ER  - 
@article{
author = "Milutinovic, Predrag and Gršić, Zoran J. and Živković, Marija M. and Dramlić, Dragan M. and Velikic, Zoran and Dramlić, Stefan D.",
year = "2012",
abstract = "The paper presents a system for automatic prevention of raising of ashes from dedicated landfills based on a simple mathematical model which has modest entry requirements for meteorological data. Such an approach is efficient enough and enables fast information retrieval, Le., zones with different concentrations of dust in the air, enabling quick start of counter measures to reduce emissions of ashes into the air. The system hardware consists of an automatic weather station, set of meters that determine moisture of ash, set of remotely managed sprinklers, computers, microprocessor and microcontroller based elements for the local acquisition and management of the executive elements and modules for wireless data transfer. An original software application for the system management has been developed. Within the application there is a module that allows entering of all data necessary to configure the system, as well as data about sensors and sprinklers. Based on the meteorological input data, measured moisture content of the ashes, and on the basis of determined functional dependencies, special software module operates sprinklers for soaking the surfaces from which the ashes is emitted into the air, in order to eliminate these emissions. The system, based on the developed mathematical model, predicts the propagation of ashes through the air, as well as dry and wet deposition, in real-time. The system automatically stores all the data relevant to the future analyses and reporting. The system is designed and implemented as modular and open. A custom developed graphical user interface serves as Man-Machine Interface (MMI). By using the TCP/IP connection it could be easily connected with the other information systems.",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "System for Automatically Preventing the Raising of Ash from Dedicated Landfills",
volume = "18",
number = "4",
pages = "681-692",
doi = "10.2298/CICEQ120228115M"
}
Milutinovic, P., Gršić, Z. J., Živković, M. M., Dramlić, D. M., Velikic, Z.,& Dramlić, S. D.. (2012). System for Automatically Preventing the Raising of Ash from Dedicated Landfills. in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 18(4), 681-692.
https://doi.org/10.2298/CICEQ120228115M
Milutinovic P, Gršić ZJ, Živković MM, Dramlić DM, Velikic Z, Dramlić SD. System for Automatically Preventing the Raising of Ash from Dedicated Landfills. in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2012;18(4):681-692.
doi:10.2298/CICEQ120228115M .
Milutinovic, Predrag, Gršić, Zoran J., Živković, Marija M., Dramlić, Dragan M., Velikic, Zoran, Dramlić, Stefan D., "System for Automatically Preventing the Raising of Ash from Dedicated Landfills" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 18, no. 4 (2012):681-692,
https://doi.org/10.2298/CICEQ120228115M . .
2
4
3

Ash Dust Concentration in the Vicinity of the Ash Disposal Site Depending on the Size of the Pond (Water Mirror)

Gršić, Zoran J.; Milutinovic, Predrag; Rajkovic, Borivoj; Dramlić, Dragan M.; Velikic, Zoran; Dramlić, Stefan D.

(2010)

TY  - JOUR
AU  - Gršić, Zoran J.
AU  - Milutinovic, Predrag
AU  - Rajkovic, Borivoj
AU  - Dramlić, Dragan M.
AU  - Velikic, Zoran
AU  - Dramlić, Stefan D.
PY  - 2010
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4134
AB  - Thermal power plants Nikola Tesla A and B are large sources of ash from their ashes/slag deposit sites Total sizes of ashes/slag depots are 600ha and 382ha, with active cassettes having dimensions similar to 200 ha and similar to 130 ha The active cassettes of the disposal sites are covered by rather large waste ponds the sizes of vary depending on the working condition of a sluice system and on meteorological conditions Modeling of ash lifting was attempted using results from the dust lifting research The relation between sizes of ponds and air dust concentration in the vicinity of ash disposal sites was analyzed As expected, greater sizes of dried disposal site surfaces in combination with stronger winds gave greater dust emission and greater air dust concentration
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - Ash Dust Concentration in the Vicinity of the Ash Disposal Site Depending on the Size of the Pond (Water Mirror)
VL  - 16
IS  - 3
SP  - 243
EP  - 249
DO  - 10.2298/CICEQ091026027G
ER  - 
@article{
author = "Gršić, Zoran J. and Milutinovic, Predrag and Rajkovic, Borivoj and Dramlić, Dragan M. and Velikic, Zoran and Dramlić, Stefan D.",
year = "2010",
abstract = "Thermal power plants Nikola Tesla A and B are large sources of ash from their ashes/slag deposit sites Total sizes of ashes/slag depots are 600ha and 382ha, with active cassettes having dimensions similar to 200 ha and similar to 130 ha The active cassettes of the disposal sites are covered by rather large waste ponds the sizes of vary depending on the working condition of a sluice system and on meteorological conditions Modeling of ash lifting was attempted using results from the dust lifting research The relation between sizes of ponds and air dust concentration in the vicinity of ash disposal sites was analyzed As expected, greater sizes of dried disposal site surfaces in combination with stronger winds gave greater dust emission and greater air dust concentration",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "Ash Dust Concentration in the Vicinity of the Ash Disposal Site Depending on the Size of the Pond (Water Mirror)",
volume = "16",
number = "3",
pages = "243-249",
doi = "10.2298/CICEQ091026027G"
}
Gršić, Z. J., Milutinovic, P., Rajkovic, B., Dramlić, D. M., Velikic, Z.,& Dramlić, S. D.. (2010). Ash Dust Concentration in the Vicinity of the Ash Disposal Site Depending on the Size of the Pond (Water Mirror). in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 16(3), 243-249.
https://doi.org/10.2298/CICEQ091026027G
Gršić ZJ, Milutinovic P, Rajkovic B, Dramlić DM, Velikic Z, Dramlić SD. Ash Dust Concentration in the Vicinity of the Ash Disposal Site Depending on the Size of the Pond (Water Mirror). in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2010;16(3):243-249.
doi:10.2298/CICEQ091026027G .
Gršić, Zoran J., Milutinovic, Predrag, Rajkovic, Borivoj, Dramlić, Dragan M., Velikic, Zoran, Dramlić, Stefan D., "Ash Dust Concentration in the Vicinity of the Ash Disposal Site Depending on the Size of the Pond (Water Mirror)" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 16, no. 3 (2010):243-249,
https://doi.org/10.2298/CICEQ091026027G . .
2
4
4

Air pollution dispersion modelling in surrounding of industrial zone of city Pancevo

Gršić, Zoran J.; Milutinovic, P; Jovašević-Stojanović, Milena; Dramlić, Dragan M.; Popović, Milan

(2004)

TY  - CONF
AU  - Gršić, Zoran J.
AU  - Milutinovic, P
AU  - Jovašević-Stojanović, Milena
AU  - Dramlić, Dragan M.
AU  - Popović, Milan
PY  - 2004
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6456
T1  - Air pollution dispersion modelling in surrounding of industrial zone of city Pancevo
VL  - 16
SP  - 127
EP  - 134
UR  - https://hdl.handle.net/21.15107/rcub_vinar_6456
ER  - 
@conference{
author = "Gršić, Zoran J. and Milutinovic, P and Jovašević-Stojanović, Milena and Dramlić, Dragan M. and Popović, Milan",
year = "2004",
title = "Air pollution dispersion modelling in surrounding of industrial zone of city Pancevo",
volume = "16",
pages = "127-134",
url = "https://hdl.handle.net/21.15107/rcub_vinar_6456"
}
Gršić, Z. J., Milutinovic, P., Jovašević-Stojanović, M., Dramlić, D. M.,& Popović, M.. (2004). Air pollution dispersion modelling in surrounding of industrial zone of city Pancevo. , 16, 127-134.
https://hdl.handle.net/21.15107/rcub_vinar_6456
Gršić ZJ, Milutinovic P, Jovašević-Stojanović M, Dramlić DM, Popović M. Air pollution dispersion modelling in surrounding of industrial zone of city Pancevo. 2004;16:127-134.
https://hdl.handle.net/21.15107/rcub_vinar_6456 .
Gršić, Zoran J., Milutinovic, P, Jovašević-Stojanović, Milena, Dramlić, Dragan M., Popović, Milan, "Air pollution dispersion modelling in surrounding of industrial zone of city Pancevo", 16 (2004):127-134,
https://hdl.handle.net/21.15107/rcub_vinar_6456 .
3