TY  - JOUR
AU  - Abduarahman, Muna Abdualatif
AU  - Vuksanović, Marija M.
AU  - Milošević, Milena
AU  - Egelja, Adela
AU  - Savić, Andrija B.
AU  - Veličković, Zlate
AU  - Marinković, Aleksandar
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12866
AB  - This study aimed to investigate the adsorption of As(V), phosphate, and textile dye Acid Green 25 (AG-25) on layered double hydroxides Mn-Fe_LDH and corresponding membranes (wCell/Mn-Fe_LDH). The wCell membrane, derived from waste tobacco boxes, was formed by cross-linking of epoxy and amino modified cellulose fibers with epoxy modified Mn-Fe_LDH and lysine as cross-linker. Structural and morphological analyses were conducted for Mn-Fe_LDH and wCell/Mn-Fe_LDH. The batch system explored pH, contact time, temperature, and initial concentration effects on wCell/Mn-Fe_LDH adsorption efficiency. Adsorption capacities of 82.71, 106.9, and 130.3 mg g−1 were achieved for As(V), phosphate, and AG-25, respectively, indicating effective anionic species removal. Kinetic analysis suggested intraparticle diffusion as the rate-limiting step. Thermodynamic parameters and ionic strength effects indicated a physisorption mechanism for AG-25 and surface complexation for As(V) and phosphate. Biodegradation experiments after five adsorption/desorption cycles revealed the membrane’s decomposition, with phosphate’s strong bonding releasing essential elements valuable for soil fertilization. Effluent wastewater treatment demonstrated low environmental impact through the formation of insoluble As(V) salts and photocatalytic dye degradation.
T2  - Journal of Polymers and the Environment
T1  - Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal
IS  - InPress
DO  - 10.1007/s10924-024-03192-x
ER  - 

@article{
author = "Abduarahman, Muna Abdualatif and Vuksanović, Marija M. and Milošević, Milena and Egelja, Adela and Savić, Andrija B. and Veličković, Zlate and Marinković, Aleksandar",
year = "2024",
abstract = "This study aimed to investigate the adsorption of As(V), phosphate, and textile dye Acid Green 25 (AG-25) on layered double hydroxides Mn-Fe_LDH and corresponding membranes (wCell/Mn-Fe_LDH). The wCell membrane, derived from waste tobacco boxes, was formed by cross-linking of epoxy and amino modified cellulose fibers with epoxy modified Mn-Fe_LDH and lysine as cross-linker. Structural and morphological analyses were conducted for Mn-Fe_LDH and wCell/Mn-Fe_LDH. The batch system explored pH, contact time, temperature, and initial concentration effects on wCell/Mn-Fe_LDH adsorption efficiency. Adsorption capacities of 82.71, 106.9, and 130.3 mg g−1 were achieved for As(V), phosphate, and AG-25, respectively, indicating effective anionic species removal. Kinetic analysis suggested intraparticle diffusion as the rate-limiting step. Thermodynamic parameters and ionic strength effects indicated a physisorption mechanism for AG-25 and surface complexation for As(V) and phosphate. Biodegradation experiments after five adsorption/desorption cycles revealed the membrane’s decomposition, with phosphate’s strong bonding releasing essential elements valuable for soil fertilization. Effluent wastewater treatment demonstrated low environmental impact through the formation of insoluble As(V) salts and photocatalytic dye degradation.",
journal = "Journal of Polymers and the Environment",
title = "Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal",
number = "InPress",
doi = "10.1007/s10924-024-03192-x"
}

Abduarahman, M. A., Vuksanović, M. M., Milošević, M., Egelja, A., Savić, A. B., Veličković, Z.,& Marinković, A.. (2024). Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal. in Journal of Polymers and the Environment(InPress).
https://doi.org/10.1007/s10924-024-03192-x

Abduarahman MA, Vuksanović MM, Milošević M, Egelja A, Savić AB, Veličković Z, Marinković A. Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal. in Journal of Polymers and the Environment. 2024;(InPress).
doi:10.1007/s10924-024-03192-x .

Abduarahman, Muna Abdualatif, Vuksanović, Marija M., Milošević, Milena, Egelja, Adela, Savić, Andrija B., Veličković, Zlate, Marinković, Aleksandar, "Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal" in Journal of Polymers and the Environment, no. InPress (2024),
https://doi.org/10.1007/s10924-024-03192-x . .

TY  - JOUR
AU  - Obradović, Vera
AU  - Vuksanović, Marija M.
AU  - Tomić, Nataša
AU  - Petrović, Miloš
AU  - Marinković, Aleksandar
AU  - Stojanović, Dušica
AU  - Radojević, Vesna
AU  - Jančić-Heinemann, Radmila
AU  - Uskoković, Petar
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10337
AB  - This study presents the impact properties of the new form of hybrid thermoplastic composites. The Kolon fabrics were impregnated with the 10 wt% poly (vinyl butyral) (PVB)/ethanol solution with the addition of silica (SiO2) particles originating from rice husk or layered double hydroxide modified silica particles (FeAl-LDH@SiO2) as reinforcement. All the composites consisted of one layer of the impregnated fabric where the silica particles concentrations were 0.5 wt% and 1.0 wt% regarding PVB. The impact properties of the composite samples were analyzed by the controlled energy puncture impact tester. The structures of the composite samples were determined by the attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) and field emission scanning electron microscopy (FE-SEM). The results showed that the Kolon/PVB/1 wt% FeAl-LDH@SiO2 sample yielded the maximum impact force.
T2  - Materials Letters
T1  - Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles
VL  - 324
SP  - 132668
DO  - 10.1016/j.matlet.2022.132668
ER  - 

@article{
author = "Obradović, Vera and Vuksanović, Marija M. and Tomić, Nataša and Petrović, Miloš and Marinković, Aleksandar and Stojanović, Dušica and Radojević, Vesna and Jančić-Heinemann, Radmila and Uskoković, Petar",
year = "2022",
abstract = "This study presents the impact properties of the new form of hybrid thermoplastic composites. The Kolon fabrics were impregnated with the 10 wt% poly (vinyl butyral) (PVB)/ethanol solution with the addition of silica (SiO2) particles originating from rice husk or layered double hydroxide modified silica particles (FeAl-LDH@SiO2) as reinforcement. All the composites consisted of one layer of the impregnated fabric where the silica particles concentrations were 0.5 wt% and 1.0 wt% regarding PVB. The impact properties of the composite samples were analyzed by the controlled energy puncture impact tester. The structures of the composite samples were determined by the attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) and field emission scanning electron microscopy (FE-SEM). The results showed that the Kolon/PVB/1 wt% FeAl-LDH@SiO2 sample yielded the maximum impact force.",
journal = "Materials Letters",
title = "Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles",
volume = "324",
pages = "132668",
doi = "10.1016/j.matlet.2022.132668"
}

Obradović, V., Vuksanović, M. M., Tomić, N., Petrović, M., Marinković, A., Stojanović, D., Radojević, V., Jančić-Heinemann, R.,& Uskoković, P.. (2022). Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles. in Materials Letters, 324, 132668.
https://doi.org/10.1016/j.matlet.2022.132668

Obradović V, Vuksanović MM, Tomić N, Petrović M, Marinković A, Stojanović D, Radojević V, Jančić-Heinemann R, Uskoković P. Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles. in Materials Letters. 2022;324:132668.
doi:10.1016/j.matlet.2022.132668 .

Obradović, Vera, Vuksanović, Marija M., Tomić, Nataša, Petrović, Miloš, Marinković, Aleksandar, Stojanović, Dušica, Radojević, Vesna, Jančić-Heinemann, Radmila, Uskoković, Petar, "Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles" in Materials Letters, 324 (2022):132668,
https://doi.org/10.1016/j.matlet.2022.132668 . .