TY  - JOUR
AU  - Jovanović, Bojana
AU  - Filipović, Jovan
AU  - Bakić, Vukman
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1673
AB  - In Serbia, a developing country, energy consumption per capita is higher than in most other countries in the region. Implementation of energy management practices is therefore necessary to cut energy consumption and CO2 emissions. This paper gives an insight into how energy management is implemented in Serbian manufacturing (focusing on food processing and manufacturing of non-metallic mineral products, defined as priority industrial sectors). No similar study for Serbian manufacturing has been published. The study was carried out using an on-line questionnaire based on the ISO 50001 requirements. Questions were grouped into 16 categories and presented according to the PDCA (Plan-Do Check-Act) cycle. The propbsed methodology has not been used by other researchers for similar problems. The survey was conducted in 52 organizations and lasted from May to December 2015. We found that the average level of requirements fulfillment in priority industrial sectors in Serbia is 59.05%. Full implementation was found in only 5.8% of participating organizations. Average implementation of the PLAN phase (establishing basics for energy management) is 61.87%, implementation of the DO phase (realization of energy management processes) is 59.98%, implementation of the CHECK phase (monitoring and measurement of energy performance) is 59.61%, and finally, implementation of the ACT phase (review and improvement of energy management) is only 3534%. The study results offer scientific data for improving national policy and education on energy management in Serbia. (C) 2017 Elsevier Ltd. All rights reserved.
T2  - Journal of Cleaner Production
T1  - Energy management system implementation in Serbian manufacturing - Plan-Do-Check-Act cycle approach
VL  - 162
SP  - 1144
EP  - 1156
DO  - 10.1016/j.jclepro.2017.06.140
ER  - 

@article{
author = "Jovanović, Bojana and Filipović, Jovan and Bakić, Vukman",
year = "2017",
abstract = "In Serbia, a developing country, energy consumption per capita is higher than in most other countries in the region. Implementation of energy management practices is therefore necessary to cut energy consumption and CO2 emissions. This paper gives an insight into how energy management is implemented in Serbian manufacturing (focusing on food processing and manufacturing of non-metallic mineral products, defined as priority industrial sectors). No similar study for Serbian manufacturing has been published. The study was carried out using an on-line questionnaire based on the ISO 50001 requirements. Questions were grouped into 16 categories and presented according to the PDCA (Plan-Do Check-Act) cycle. The propbsed methodology has not been used by other researchers for similar problems. The survey was conducted in 52 organizations and lasted from May to December 2015. We found that the average level of requirements fulfillment in priority industrial sectors in Serbia is 59.05%. Full implementation was found in only 5.8% of participating organizations. Average implementation of the PLAN phase (establishing basics for energy management) is 61.87%, implementation of the DO phase (realization of energy management processes) is 59.98%, implementation of the CHECK phase (monitoring and measurement of energy performance) is 59.61%, and finally, implementation of the ACT phase (review and improvement of energy management) is only 3534%. The study results offer scientific data for improving national policy and education on energy management in Serbia. (C) 2017 Elsevier Ltd. All rights reserved.",
journal = "Journal of Cleaner Production",
title = "Energy management system implementation in Serbian manufacturing - Plan-Do-Check-Act cycle approach",
volume = "162",
pages = "1144-1156",
doi = "10.1016/j.jclepro.2017.06.140"
}

Jovanović, B., Filipović, J.,& Bakić, V.. (2017). Energy management system implementation in Serbian manufacturing - Plan-Do-Check-Act cycle approach. in Journal of Cleaner Production, 162, 1144-1156.
https://doi.org/10.1016/j.jclepro.2017.06.140

Jovanović B, Filipović J, Bakić V. Energy management system implementation in Serbian manufacturing - Plan-Do-Check-Act cycle approach. in Journal of Cleaner Production. 2017;162:1144-1156.
doi:10.1016/j.jclepro.2017.06.140 .

Jovanović, Bojana, Filipović, Jovan, Bakić, Vukman, "Energy management system implementation in Serbian manufacturing - Plan-Do-Check-Act cycle approach" in Journal of Cleaner Production, 162 (2017):1144-1156,
https://doi.org/10.1016/j.jclepro.2017.06.140 . .

TY  - JOUR
AU  - Jovanović, Bojana
AU  - Filipović, Jovan
AU  - Bakić, Vukman
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/702
AB  - Manufacturing, which is destined to play the most significant role in the reindustrialization of Serbia is also one of the largest energy consumers and environmental polluters. In accordance with this, a large number of energy and environment management initiatives have been implemented over the years. In developed countries, these initiatives are at an advanced level, but not in Serbia. A group of manufacturers in Serbia has recognized the significance of the environmental initiatives implementation, but the interest in energy management improvement has remained low. Although these initiatives can be used to achieve cost reduction in industry, not all the manufacturing sectors equally value the importance of energy management improvement. Among all the manufacturing sectors, it is necessary to prioritize those with the potentials for energy management improvement, which can be done using different methods. In this paper, the AHP (Analytic Hierarchy Process) method was used to prioritize manufacturing sectors in Serbia in the area of energy management improvement. Using a created AHP questionnaires criteria weights were selected. These questionnaires were completed by the experts from the Serbian Chamber of Commerce and Industry, providing us with the opportunity to evaluate the Serbian manufacturing sectors based on the real life data. The results of the AHP method, which was used as the prioritization instrument, and their analysis are presented in the paper. As a part of a wider study, aimed at the improvement of the energy management in Serbia, the three manufacturing sectors with the highest priority (Manufacture of food products, Manufacture of motor vehicles, trailers and semi-trailers, Manufacture of other non-metallic mineral products) will be analyzed in the future research in terms of energy process flows, energy management system implementation and other relevant issues. (C) 2015 Elsevier Ltd. All rights reserved.
T2  - Energy Conversion and Management
T1  - Prioritization of manufacturing sectors in Serbia for energy management improvement - AHP method
VL  - 98
SP  - 225
EP  - 235
DO  - 10.1016/j.enconman.2015.03.107
ER  - 

@article{
author = "Jovanović, Bojana and Filipović, Jovan and Bakić, Vukman",
year = "2015",
abstract = "Manufacturing, which is destined to play the most significant role in the reindustrialization of Serbia is also one of the largest energy consumers and environmental polluters. In accordance with this, a large number of energy and environment management initiatives have been implemented over the years. In developed countries, these initiatives are at an advanced level, but not in Serbia. A group of manufacturers in Serbia has recognized the significance of the environmental initiatives implementation, but the interest in energy management improvement has remained low. Although these initiatives can be used to achieve cost reduction in industry, not all the manufacturing sectors equally value the importance of energy management improvement. Among all the manufacturing sectors, it is necessary to prioritize those with the potentials for energy management improvement, which can be done using different methods. In this paper, the AHP (Analytic Hierarchy Process) method was used to prioritize manufacturing sectors in Serbia in the area of energy management improvement. Using a created AHP questionnaires criteria weights were selected. These questionnaires were completed by the experts from the Serbian Chamber of Commerce and Industry, providing us with the opportunity to evaluate the Serbian manufacturing sectors based on the real life data. The results of the AHP method, which was used as the prioritization instrument, and their analysis are presented in the paper. As a part of a wider study, aimed at the improvement of the energy management in Serbia, the three manufacturing sectors with the highest priority (Manufacture of food products, Manufacture of motor vehicles, trailers and semi-trailers, Manufacture of other non-metallic mineral products) will be analyzed in the future research in terms of energy process flows, energy management system implementation and other relevant issues. (C) 2015 Elsevier Ltd. All rights reserved.",
journal = "Energy Conversion and Management",
title = "Prioritization of manufacturing sectors in Serbia for energy management improvement - AHP method",
volume = "98",
pages = "225-235",
doi = "10.1016/j.enconman.2015.03.107"
}

Jovanović, B., Filipović, J.,& Bakić, V.. (2015). Prioritization of manufacturing sectors in Serbia for energy management improvement - AHP method. in Energy Conversion and Management, 98, 225-235.
https://doi.org/10.1016/j.enconman.2015.03.107

Jovanović B, Filipović J, Bakić V. Prioritization of manufacturing sectors in Serbia for energy management improvement - AHP method. in Energy Conversion and Management. 2015;98:225-235.
doi:10.1016/j.enconman.2015.03.107 .

Jovanović, Bojana, Filipović, Jovan, Bakić, Vukman, "Prioritization of manufacturing sectors in Serbia for energy management improvement - AHP method" in Energy Conversion and Management, 98 (2015):225-235,
https://doi.org/10.1016/j.enconman.2015.03.107 . .