TY  - JOUR
AU  - Ristić, Gordana
AU  - Bogdanov, Žarko
AU  - Zec, Slavica
AU  - Romčević, Nebojša Ž.
AU  - Dohcevic-Mitrovic, Z
AU  - Miljanić, Šćepan S.
PY  - 2003
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2629
AB  - Diamond coatings were deposited onto different substrates (Cu, Si, WC-Co, Mo) by hot-filament chemical vapor deposition (CVD). Characterization of the obtained coatings was performed using scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, Raman spectroscopy and Fourier transform infrared reflection (FTIR) spectroscopy. The results and observed differences are discussed from the aspect of the chemical nature of the substrate and its reactivity with a gaseous medium. 2003 Elsevier Science B.V. All rights reserved.
T2  - Materials Chemistry and Physics
T1  - Effect of the substrate material on diamond CVD coating properties
VL  - 80
IS  - 2
SP  - 529
EP  - 536
DO  - 10.1016/S0254-0584(03)00094-4
ER  - 

@article{
author = "Ristić, Gordana and Bogdanov, Žarko and Zec, Slavica and Romčević, Nebojša Ž. and Dohcevic-Mitrovic, Z and Miljanić, Šćepan S.",
year = "2003",
abstract = "Diamond coatings were deposited onto different substrates (Cu, Si, WC-Co, Mo) by hot-filament chemical vapor deposition (CVD). Characterization of the obtained coatings was performed using scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, Raman spectroscopy and Fourier transform infrared reflection (FTIR) spectroscopy. The results and observed differences are discussed from the aspect of the chemical nature of the substrate and its reactivity with a gaseous medium. 2003 Elsevier Science B.V. All rights reserved.",
journal = "Materials Chemistry and Physics",
title = "Effect of the substrate material on diamond CVD coating properties",
volume = "80",
number = "2",
pages = "529-536",
doi = "10.1016/S0254-0584(03)00094-4"
}

Ristić, G., Bogdanov, Ž., Zec, S., Romčević, N. Ž., Dohcevic-Mitrovic, Z.,& Miljanić, Š. S.. (2003). Effect of the substrate material on diamond CVD coating properties. in Materials Chemistry and Physics, 80(2), 529-536.
https://doi.org/10.1016/S0254-0584(03)00094-4

Ristić G, Bogdanov Ž, Zec S, Romčević NŽ, Dohcevic-Mitrovic Z, Miljanić ŠS. Effect of the substrate material on diamond CVD coating properties. in Materials Chemistry and Physics. 2003;80(2):529-536.
doi:10.1016/S0254-0584(03)00094-4 .

Ristić, Gordana, Bogdanov, Žarko, Zec, Slavica, Romčević, Nebojša Ž., Dohcevic-Mitrovic, Z, Miljanić, Šćepan S., "Effect of the substrate material on diamond CVD coating properties" in Materials Chemistry and Physics, 80, no. 2 (2003):529-536,
https://doi.org/10.1016/S0254-0584(03)00094-4 . .

TY  - JOUR
AU  - Radak, Bojan
AU  - Pastirk, Igor
AU  - Ristić, Gordana
AU  - Petkovska, Ljubica T.
PY  - 1998
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2147
AB  - Carbon dioxide laser coincidences were investigated by photoacoustic detection at laser lines 10P(28) and 9P(28) with ethene and at 10P(20) and 10P(16) with ammonia. The intensities of coincidences were measured as a function of pressure of a buffer gas (dry air) and pure gas. The intensities of two ammonia coincidences show an inversion with pressure. A method of eliminating all pressure effects other than those of spectral nature from the PA signal was introduced. This enabled deriving the pressure broadening coefficients of the coinciding absorption lines. (C) 1998 Published by Elsevier Science B.V.
T2  - Infrared Physics and Technology
T1  - Pressure effects on CO2-laser coincidences with ethene and ammonia investigated by photoacoustic detection
VL  - 39
IS  - 1
SP  - 7
EP  - 13
DO  - 10.1016/S1350-4495(97)00035-2
ER  - 

@article{
author = "Radak, Bojan and Pastirk, Igor and Ristić, Gordana and Petkovska, Ljubica T.",
year = "1998",
abstract = "Carbon dioxide laser coincidences were investigated by photoacoustic detection at laser lines 10P(28) and 9P(28) with ethene and at 10P(20) and 10P(16) with ammonia. The intensities of coincidences were measured as a function of pressure of a buffer gas (dry air) and pure gas. The intensities of two ammonia coincidences show an inversion with pressure. A method of eliminating all pressure effects other than those of spectral nature from the PA signal was introduced. This enabled deriving the pressure broadening coefficients of the coinciding absorption lines. (C) 1998 Published by Elsevier Science B.V.",
journal = "Infrared Physics and Technology",
title = "Pressure effects on CO2-laser coincidences with ethene and ammonia investigated by photoacoustic detection",
volume = "39",
number = "1",
pages = "7-13",
doi = "10.1016/S1350-4495(97)00035-2"
}

Radak, B., Pastirk, I., Ristić, G.,& Petkovska, L. T.. (1998). Pressure effects on CO2-laser coincidences with ethene and ammonia investigated by photoacoustic detection. in Infrared Physics and Technology, 39(1), 7-13.
https://doi.org/10.1016/S1350-4495(97)00035-2

Radak B, Pastirk I, Ristić G, Petkovska LT. Pressure effects on CO2-laser coincidences with ethene and ammonia investigated by photoacoustic detection. in Infrared Physics and Technology. 1998;39(1):7-13.
doi:10.1016/S1350-4495(97)00035-2 .

Radak, Bojan, Pastirk, Igor, Ristić, Gordana, Petkovska, Ljubica T., "Pressure effects on CO2-laser coincidences with ethene and ammonia investigated by photoacoustic detection" in Infrared Physics and Technology, 39, no. 1 (1998):7-13,
https://doi.org/10.1016/S1350-4495(97)00035-2 . .

TY  - JOUR
AU  - Ristić, Gordana
AU  - Petkovska, Ljubica T.
AU  - Bogdanov, Žarko
AU  - Zec, Slavica
AU  - Miljanić, Šćepan S.
PY  - 1998
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2129
AB  - A tungsten filament, 0.12 mm in diameter, was conditioned by heating in a mixture of methane and hydrogen of three different concentration ratios. The filament was heated by an electric current. The procedure was carried out stepwise keeping either the voltage or the temperature of the filament constant. Changes in the filament material were monitored by resistance and temperature measurements. The chemical composition was checked using X-ray diffraction (XRD) analysis. The final state of the filament was investigated and photographed using the scanning-electron microscopy (SEM) technique.
T2  - Journal of the Serbian Chemical Society
T1  - Conditioning of the filament for diamond deposition by hot-filament chemical vapour deposition method
VL  - 63
IS  - 3
SP  - 231
EP  - 235
UR  - https://hdl.handle.net/21.15107/rcub_vinar_2129
ER  - 

@article{
author = "Ristić, Gordana and Petkovska, Ljubica T. and Bogdanov, Žarko and Zec, Slavica and Miljanić, Šćepan S.",
year = "1998",
abstract = "A tungsten filament, 0.12 mm in diameter, was conditioned by heating in a mixture of methane and hydrogen of three different concentration ratios. The filament was heated by an electric current. The procedure was carried out stepwise keeping either the voltage or the temperature of the filament constant. Changes in the filament material were monitored by resistance and temperature measurements. The chemical composition was checked using X-ray diffraction (XRD) analysis. The final state of the filament was investigated and photographed using the scanning-electron microscopy (SEM) technique.",
journal = "Journal of the Serbian Chemical Society",
title = "Conditioning of the filament for diamond deposition by hot-filament chemical vapour deposition method",
volume = "63",
number = "3",
pages = "231-235",
url = "https://hdl.handle.net/21.15107/rcub_vinar_2129"
}

Ristić, G., Petkovska, L. T., Bogdanov, Ž., Zec, S.,& Miljanić, Š. S.. (1998). Conditioning of the filament for diamond deposition by hot-filament chemical vapour deposition method. in Journal of the Serbian Chemical Society, 63(3), 231-235.
https://hdl.handle.net/21.15107/rcub_vinar_2129

Ristić G, Petkovska LT, Bogdanov Ž, Zec S, Miljanić ŠS. Conditioning of the filament for diamond deposition by hot-filament chemical vapour deposition method. in Journal of the Serbian Chemical Society. 1998;63(3):231-235.
https://hdl.handle.net/21.15107/rcub_vinar_2129 .

Ristić, Gordana, Petkovska, Ljubica T., Bogdanov, Žarko, Zec, Slavica, Miljanić, Šćepan S., "Conditioning of the filament for diamond deposition by hot-filament chemical vapour deposition method" in Journal of the Serbian Chemical Society, 63, no. 3 (1998):231-235,
https://hdl.handle.net/21.15107/rcub_vinar_2129 .

TY  - JOUR
AU  - Ristić, Gordana
AU  - Petkovska, Ljubica T.
AU  - Bogdanov, Žarko
AU  - Zec, Slavica
AU  - Miljanić, Šćepan S.
PY  - 1998
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/46
AB  - A tungsten filament, 0.12 mm in diameter, was conditioned by heating in a mixture of methane and hydrogen of three different concentration ratios. The filament was heated by an electric current. The procedure was carried out stepwise keeping either the voltage or the temperature of the filament constant. Changes in the filament material were monitored by resistance and temperature measurements. The chemical composition was checked using X-ray diffraction (XRD) analysis. The final state of the filament was investigated and photographed using the scanning-electron microscopy (SEM) technique.
T2  - Journal of the Serbian Chemical Society
T1  - Conditioning of the filament for diamond deposition by hot-filament chemical vapour deposition method
VL  - 63
IS  - 3
SP  - 231
EP  - 235
UR  - https://hdl.handle.net/21.15107/rcub_vinar_46
ER  - 

@article{
author = "Ristić, Gordana and Petkovska, Ljubica T. and Bogdanov, Žarko and Zec, Slavica and Miljanić, Šćepan S.",
year = "1998",
abstract = "A tungsten filament, 0.12 mm in diameter, was conditioned by heating in a mixture of methane and hydrogen of three different concentration ratios. The filament was heated by an electric current. The procedure was carried out stepwise keeping either the voltage or the temperature of the filament constant. Changes in the filament material were monitored by resistance and temperature measurements. The chemical composition was checked using X-ray diffraction (XRD) analysis. The final state of the filament was investigated and photographed using the scanning-electron microscopy (SEM) technique.",
journal = "Journal of the Serbian Chemical Society",
title = "Conditioning of the filament for diamond deposition by hot-filament chemical vapour deposition method",
volume = "63",
number = "3",
pages = "231-235",
url = "https://hdl.handle.net/21.15107/rcub_vinar_46"
}

Ristić, G., Petkovska, L. T., Bogdanov, Ž., Zec, S.,& Miljanić, Š. S.. (1998). Conditioning of the filament for diamond deposition by hot-filament chemical vapour deposition method. in Journal of the Serbian Chemical Society, 63(3), 231-235.
https://hdl.handle.net/21.15107/rcub_vinar_46

Ristić G, Petkovska LT, Bogdanov Ž, Zec S, Miljanić ŠS. Conditioning of the filament for diamond deposition by hot-filament chemical vapour deposition method. in Journal of the Serbian Chemical Society. 1998;63(3):231-235.
https://hdl.handle.net/21.15107/rcub_vinar_46 .

Ristić, Gordana, Petkovska, Ljubica T., Bogdanov, Žarko, Zec, Slavica, Miljanić, Šćepan S., "Conditioning of the filament for diamond deposition by hot-filament chemical vapour deposition method" in Journal of the Serbian Chemical Society, 63, no. 3 (1998):231-235,
https://hdl.handle.net/21.15107/rcub_vinar_46 .