Pajić-Lijaković, Ivana

Link to this page

Authority KeyName Variants
orcid::0000-0001-9663-6916
  • Pajić-Lijaković, Ivana (5)
Projects

Author's Bibliography

Influence of the precursor chemical composition on heavy metal adsorption properties of hemp (Cannabis Sativa) fibers based biocarbon

Vukčević, Marija M.; Pejić, Biljana M.; Pajić-Lijaković, Ivana; Kalijadis, Ana; Kostić, Mirjana M.; Laušević, Zoran; Laušević, Mila D.

(2017)

TY  - JOUR
AU  - Vukčević, Marija M.
AU  - Pejić, Biljana M.
AU  - Pajić-Lijaković, Ivana
AU  - Kalijadis, Ana
AU  - Kostić, Mirjana M.
AU  - Laušević, Zoran
AU  - Laušević, Mila D.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1897
AB  - Waste hemp (Cannabis sativa) fibers were used as sustainable and renewable raw materials for production of low-cost biocarbon sorbent for heavy metals removal. Carbon precursors of different chemical composition were obtained by oxidative and alkaline treatments of hemp fibers. Influence of lignocellulosic precursor chemical composition on hemp fibers-based biocarbon (HFB) characteristics was examined by BET surface area measurement, scanning electron microscopy and mass titration. It was found that lignin content and polymorphic transformation of cellulose increase the SBET of microporous HFBs, while hemicelluloses induce more homogeneous distribution of adsorption active sites. Heavy metal ions adsorption onto HFBs is primarily influenced by the amount of surface oxygen groups, while specific surface area plays a secondary role. Equilibrium data obtained for lead ions adsorption were analyzed by different nonlinear adsorption isotherms, and the best fitting model was chosen using standard deviation and Akaike information criterion (AIC(C)). The maximum adsorption capacities of HFBs ranged from 103.1 to 116.3 mg Pb/g. Thermodynamic parameters showed that Pb2+ adsorption onto HFBs is a spontaneous and complex endothermic process, suggesting the coexistence of physisorption and chemisorption mechanisms.
T2  - Journal of the Serbian Chemical Society
T1  - Influence of the precursor chemical composition on heavy metal adsorption properties of hemp (Cannabis Sativa) fibers based biocarbon
VL  - 82
IS  - 12
SP  - 1417
EP  - 1431
DO  - 10.2298/JSC170310080V
ER  - 
@article{
author = "Vukčević, Marija M. and Pejić, Biljana M. and Pajić-Lijaković, Ivana and Kalijadis, Ana and Kostić, Mirjana M. and Laušević, Zoran and Laušević, Mila D.",
year = "2017",
abstract = "Waste hemp (Cannabis sativa) fibers were used as sustainable and renewable raw materials for production of low-cost biocarbon sorbent for heavy metals removal. Carbon precursors of different chemical composition were obtained by oxidative and alkaline treatments of hemp fibers. Influence of lignocellulosic precursor chemical composition on hemp fibers-based biocarbon (HFB) characteristics was examined by BET surface area measurement, scanning electron microscopy and mass titration. It was found that lignin content and polymorphic transformation of cellulose increase the SBET of microporous HFBs, while hemicelluloses induce more homogeneous distribution of adsorption active sites. Heavy metal ions adsorption onto HFBs is primarily influenced by the amount of surface oxygen groups, while specific surface area plays a secondary role. Equilibrium data obtained for lead ions adsorption were analyzed by different nonlinear adsorption isotherms, and the best fitting model was chosen using standard deviation and Akaike information criterion (AIC(C)). The maximum adsorption capacities of HFBs ranged from 103.1 to 116.3 mg Pb/g. Thermodynamic parameters showed that Pb2+ adsorption onto HFBs is a spontaneous and complex endothermic process, suggesting the coexistence of physisorption and chemisorption mechanisms.",
journal = "Journal of the Serbian Chemical Society",
title = "Influence of the precursor chemical composition on heavy metal adsorption properties of hemp (Cannabis Sativa) fibers based biocarbon",
volume = "82",
number = "12",
pages = "1417-1431",
doi = "10.2298/JSC170310080V"
}
Vukčević, M. M., Pejić, B. M., Pajić-Lijaković, I., Kalijadis, A., Kostić, M. M., Laušević, Z.,& Laušević, M. D.. (2017). Influence of the precursor chemical composition on heavy metal adsorption properties of hemp (Cannabis Sativa) fibers based biocarbon. in Journal of the Serbian Chemical Society, 82(12), 1417-1431.
https://doi.org/10.2298/JSC170310080V
Vukčević MM, Pejić BM, Pajić-Lijaković I, Kalijadis A, Kostić MM, Laušević Z, Laušević MD. Influence of the precursor chemical composition on heavy metal adsorption properties of hemp (Cannabis Sativa) fibers based biocarbon. in Journal of the Serbian Chemical Society. 2017;82(12):1417-1431.
doi:10.2298/JSC170310080V .
Vukčević, Marija M., Pejić, Biljana M., Pajić-Lijaković, Ivana, Kalijadis, Ana, Kostić, Mirjana M., Laušević, Zoran, Laušević, Mila D., "Influence of the precursor chemical composition on heavy metal adsorption properties of hemp (Cannabis Sativa) fibers based biocarbon" in Journal of the Serbian Chemical Society, 82, no. 12 (2017):1417-1431,
https://doi.org/10.2298/JSC170310080V . .
7
1
5

Physical-chemical behavior of novel copolymers composed of methacrylic acid and 2-acrylamido-2-methylpropane sulfonic acid

Nešić, Aleksandra; Panić, Vesna; Ostojić, Sanja ; Micić, Darko M.; Pajić-Lijaković, Ivana; Onjia, Antonije E.; Veličković, Sava J.

(Elsevier, 2016)

TY  - JOUR
AU  - Nešić, Aleksandra
AU  - Panić, Vesna
AU  - Ostojić, Sanja 
AU  - Micić, Darko M.
AU  - Pajić-Lijaković, Ivana
AU  - Onjia, Antonije E.
AU  - Veličković, Sava J.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1009
AB  - This article described the synthesis and characterization of new copolymer hydrogels containing two hydrophilic units-methacrylic acid (MAA) and 2-Acrylamido-2-methylpropane sulfonic acid (AMPS). The resulting hydrogels were characterized by various techniques: FTIR, Elemental analysis, SEM, Dynamic Molecular simulation, Dynamic-Mechanical analysis and DSC in order to confirm the structure of hydrogels and to predict the best ratio composition with enhanced physical chemical properties. The swelling behavior in water was studied as a function of ratio of monomers and their concentration in medium. An increase in AMPS content led to expansion of network and increase in swelling degree capacity in water. An increase in AMPS content did not significantly influence the glass transition temperature of copolymers, indicated that the physical properties of initial components were preserved. The equal amount of monomers contributed to the highest strength of hydrogels. Meanwhile, the introduction of AMPS to the system was an effective method for improving the performances of the poly(methacrylic acid)- based hydrogels. (C) 2016 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Physical-chemical behavior of novel copolymers composed of methacrylic acid and 2-acrylamido-2-methylpropane sulfonic acid
VL  - 174
SP  - 156
EP  - 163
DO  - 10.1016/j.matchemphys.2016.02.063
ER  - 
@article{
author = "Nešić, Aleksandra and Panić, Vesna and Ostojić, Sanja  and Micić, Darko M. and Pajić-Lijaković, Ivana and Onjia, Antonije E. and Veličković, Sava J.",
year = "2016",
abstract = "This article described the synthesis and characterization of new copolymer hydrogels containing two hydrophilic units-methacrylic acid (MAA) and 2-Acrylamido-2-methylpropane sulfonic acid (AMPS). The resulting hydrogels were characterized by various techniques: FTIR, Elemental analysis, SEM, Dynamic Molecular simulation, Dynamic-Mechanical analysis and DSC in order to confirm the structure of hydrogels and to predict the best ratio composition with enhanced physical chemical properties. The swelling behavior in water was studied as a function of ratio of monomers and their concentration in medium. An increase in AMPS content led to expansion of network and increase in swelling degree capacity in water. An increase in AMPS content did not significantly influence the glass transition temperature of copolymers, indicated that the physical properties of initial components were preserved. The equal amount of monomers contributed to the highest strength of hydrogels. Meanwhile, the introduction of AMPS to the system was an effective method for improving the performances of the poly(methacrylic acid)- based hydrogels. (C) 2016 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Physical-chemical behavior of novel copolymers composed of methacrylic acid and 2-acrylamido-2-methylpropane sulfonic acid",
volume = "174",
pages = "156-163",
doi = "10.1016/j.matchemphys.2016.02.063"
}
Nešić, A., Panić, V., Ostojić, S., Micić, D. M., Pajić-Lijaković, I., Onjia, A. E.,& Veličković, S. J.. (2016). Physical-chemical behavior of novel copolymers composed of methacrylic acid and 2-acrylamido-2-methylpropane sulfonic acid. in Materials Chemistry and Physics
Elsevier., 174, 156-163.
https://doi.org/10.1016/j.matchemphys.2016.02.063
Nešić A, Panić V, Ostojić S, Micić DM, Pajić-Lijaković I, Onjia AE, Veličković SJ. Physical-chemical behavior of novel copolymers composed of methacrylic acid and 2-acrylamido-2-methylpropane sulfonic acid. in Materials Chemistry and Physics. 2016;174:156-163.
doi:10.1016/j.matchemphys.2016.02.063 .
Nešić, Aleksandra, Panić, Vesna, Ostojić, Sanja , Micić, Darko M., Pajić-Lijaković, Ivana, Onjia, Antonije E., Veličković, Sava J., "Physical-chemical behavior of novel copolymers composed of methacrylic acid and 2-acrylamido-2-methylpropane sulfonic acid" in Materials Chemistry and Physics, 174 (2016):156-163,
https://doi.org/10.1016/j.matchemphys.2016.02.063 . .
29
20
28

Carbon materials from waste short hemp fibers as a sorbent for heavy metal ions - Mathematical modeling of sorbent structure and ions transport

Vukčević, Marija; Pejić, Biljana; Kalijadis, Ana; Pajić-Lijaković, Ivana; Kostić, Mirjana M.; Laušević, Zoran; Laušević, Mila D.

(2014)

TY  - JOUR
AU  - Vukčević, Marija
AU  - Pejić, Biljana
AU  - Kalijadis, Ana
AU  - Pajić-Lijaković, Ivana
AU  - Kostić, Mirjana M.
AU  - Laušević, Zoran
AU  - Laušević, Mila D.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5815
AB  - Carbonized hemp fibers obtained by carbonization of origin and chemically modified waste hemp fibers was used as a low-cost sorbent for heavy metals removal. The efficiency of carbonized hemp fiber samples as a sorbent was tested through the adsorption of lead ions as a heavy metal model ion. Although changes in carbon precursor structure, induced by chemical modification, affect the sorption process and sorption capacity of carbonized hemp fibers, all carbonized hemp fibers samples show good adsorption properties toward lead ions. Obtained experimental data was used for development of the mathematical model that describes both the phenomenon of metal ions transport through the porous sorbent matrices, and the structure of carbonized hemp fibers. Effective diffusion coefficient, damping coefficient and the lead ion concentration profile within the carbonized hemp fibers, obtained as results of proposed mathematical model, give the insight in the mechanism and the rate of adsorption process, while average tortuosity connected the sorbent structure and ions transport through the sorbent. A good agreement between model prediction for both structural and ion transport model parameters and the experimental data, indicates that the proposed mathematical model can be successfully used for optimization of heavy metal ions adsorption process by correlating the model parameters to the carbonized hemp fibers performances. (C) 2013 Elsevier B.V. All rights reserved.
T2  - Chemical Engineering Journal
T1  - Carbon materials from waste short hemp fibers as a sorbent for heavy metal ions - Mathematical modeling of sorbent structure and ions transport
VL  - 235
SP  - 284
EP  - 292
DO  - 10.1016/j.cej.2013.09.047
ER  - 
@article{
author = "Vukčević, Marija and Pejić, Biljana and Kalijadis, Ana and Pajić-Lijaković, Ivana and Kostić, Mirjana M. and Laušević, Zoran and Laušević, Mila D.",
year = "2014",
abstract = "Carbonized hemp fibers obtained by carbonization of origin and chemically modified waste hemp fibers was used as a low-cost sorbent for heavy metals removal. The efficiency of carbonized hemp fiber samples as a sorbent was tested through the adsorption of lead ions as a heavy metal model ion. Although changes in carbon precursor structure, induced by chemical modification, affect the sorption process and sorption capacity of carbonized hemp fibers, all carbonized hemp fibers samples show good adsorption properties toward lead ions. Obtained experimental data was used for development of the mathematical model that describes both the phenomenon of metal ions transport through the porous sorbent matrices, and the structure of carbonized hemp fibers. Effective diffusion coefficient, damping coefficient and the lead ion concentration profile within the carbonized hemp fibers, obtained as results of proposed mathematical model, give the insight in the mechanism and the rate of adsorption process, while average tortuosity connected the sorbent structure and ions transport through the sorbent. A good agreement between model prediction for both structural and ion transport model parameters and the experimental data, indicates that the proposed mathematical model can be successfully used for optimization of heavy metal ions adsorption process by correlating the model parameters to the carbonized hemp fibers performances. (C) 2013 Elsevier B.V. All rights reserved.",
journal = "Chemical Engineering Journal",
title = "Carbon materials from waste short hemp fibers as a sorbent for heavy metal ions - Mathematical modeling of sorbent structure and ions transport",
volume = "235",
pages = "284-292",
doi = "10.1016/j.cej.2013.09.047"
}
Vukčević, M., Pejić, B., Kalijadis, A., Pajić-Lijaković, I., Kostić, M. M., Laušević, Z.,& Laušević, M. D.. (2014). Carbon materials from waste short hemp fibers as a sorbent for heavy metal ions - Mathematical modeling of sorbent structure and ions transport. in Chemical Engineering Journal, 235, 284-292.
https://doi.org/10.1016/j.cej.2013.09.047
Vukčević M, Pejić B, Kalijadis A, Pajić-Lijaković I, Kostić MM, Laušević Z, Laušević MD. Carbon materials from waste short hemp fibers as a sorbent for heavy metal ions - Mathematical modeling of sorbent structure and ions transport. in Chemical Engineering Journal. 2014;235:284-292.
doi:10.1016/j.cej.2013.09.047 .
Vukčević, Marija, Pejić, Biljana, Kalijadis, Ana, Pajić-Lijaković, Ivana, Kostić, Mirjana M., Laušević, Zoran, Laušević, Mila D., "Carbon materials from waste short hemp fibers as a sorbent for heavy metal ions - Mathematical modeling of sorbent structure and ions transport" in Chemical Engineering Journal, 235 (2014):284-292,
https://doi.org/10.1016/j.cej.2013.09.047 . .
37
20
34

Mathematical modeling of pesticide adsorption on activated hemp fibers

Vukčević, Mira; Pajić-Lijaković, Ivana; Kalijadis, Ana; Laušević, Zoran; Laušević, Mila

(Society of Physical Chemists of Serbia, 2014)

TY  - CONF
AU  - Vukčević, Mira
AU  - Pajić-Lijaković, Ivana
AU  - Kalijadis, Ana
AU  - Laušević, Zoran
AU  - Laušević, Mila
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9225
AB  - Activated carbon obtained by carbonization and activation of waste hemp
fibers was used as an efficient, low-cost sorbent for pesticide removal. Data
obtained from batch and continuous process of pesticide adsorption was
used for development of the mathematical model that describes the
phenomenon of pesticide transport through the porous sorbent matrices.
Effective diffusion coefficient and the pesticide concentration profile within
the activated hemp fibers, obtained as results of proposed model, give the
insight in the mechanism and the rate of adsorption process and pesticide
transport through the sorbent. A good agreement between model prediction
and the experimental data indicates that the proposed mathematical model
can be successfully used for optimization and selection of appropriate
adsorption process for pesticide removal.
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry
T1  - Mathematical modeling of pesticide adsorption on activated hemp fibers
VL  - K-04-O
UR  - https://hdl.handle.net/21.15107/rcub_vinar_9225
ER  - 
@conference{
author = "Vukčević, Mira and Pajić-Lijaković, Ivana and Kalijadis, Ana and Laušević, Zoran and Laušević, Mila",
year = "2014",
abstract = "Activated carbon obtained by carbonization and activation of waste hemp
fibers was used as an efficient, low-cost sorbent for pesticide removal. Data
obtained from batch and continuous process of pesticide adsorption was
used for development of the mathematical model that describes the
phenomenon of pesticide transport through the porous sorbent matrices.
Effective diffusion coefficient and the pesticide concentration profile within
the activated hemp fibers, obtained as results of proposed model, give the
insight in the mechanism and the rate of adsorption process and pesticide
transport through the sorbent. A good agreement between model prediction
and the experimental data indicates that the proposed mathematical model
can be successfully used for optimization and selection of appropriate
adsorption process for pesticide removal.",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry",
title = "Mathematical modeling of pesticide adsorption on activated hemp fibers",
volume = "K-04-O",
url = "https://hdl.handle.net/21.15107/rcub_vinar_9225"
}
Vukčević, M., Pajić-Lijaković, I., Kalijadis, A., Laušević, Z.,& Laušević, M.. (2014). Mathematical modeling of pesticide adsorption on activated hemp fibers. in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry
Society of Physical Chemists of Serbia., K-04-O.
https://hdl.handle.net/21.15107/rcub_vinar_9225
Vukčević M, Pajić-Lijaković I, Kalijadis A, Laušević Z, Laušević M. Mathematical modeling of pesticide adsorption on activated hemp fibers. in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry. 2014;K-04-O.
https://hdl.handle.net/21.15107/rcub_vinar_9225 .
Vukčević, Mira, Pajić-Lijaković, Ivana, Kalijadis, Ana, Laušević, Zoran, Laušević, Mila, "Mathematical modeling of pesticide adsorption on activated hemp fibers" in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry, K-04-O (2014),
https://hdl.handle.net/21.15107/rcub_vinar_9225 .

Biomaterijali

Balać, Igor; Bugarski, Branko M.; Ćosić, Irena; Dramićanin, Miroslav; Đorđević, Drago; Filipović, Nenad D.; Ignjatović, Nenad L.; Janaćković, Đorđe T.; Kojić, Miloš; Manojlović, Verica; Marković, Zoran M.; Obradović, Bojana; Pajić-Lijaković, Ivana; Pavlović, Miodrag; Plavšić, Milenko; Raković, Dejan; Ranković, Vladimir; Stojanović, Boban; Trajković, Vladimir S.; Uskoković, Dragan; Uskoković, Petar; Veljković, Dejan; Vlastelica, Ivo; Vunjak Novaković, Gordana

(Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala, 2010)

TY  - BOOK
AU  - Balać, Igor
AU  - Bugarski, Branko M.
AU  - Ćosić, Irena
AU  - Dramićanin, Miroslav
AU  - Đorđević, Drago
AU  - Filipović, Nenad D.
AU  - Ignjatović, Nenad L.
AU  - Janaćković, Đorđe T.
AU  - Kojić, Miloš
AU  - Manojlović, Verica
AU  - Marković, Zoran M.
AU  - Obradović, Bojana
AU  - Pajić-Lijaković, Ivana
AU  - Pavlović, Miodrag
AU  - Plavšić, Milenko
AU  - Raković, Dejan
AU  - Ranković, Vladimir
AU  - Stojanović, Boban
AU  - Trajković, Vladimir S.
AU  - Uskoković, Dragan
AU  - Uskoković, Petar
AU  - Veljković, Dejan
AU  - Vlastelica, Ivo
AU  - Vunjak Novaković, Gordana
PY  - 2010
UR  - http://dais.sanu.ac.rs/123456789/121
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7344
AB  - Početak XXI veka nesumnjivo je obeležen interdisciplinarnim i multidisciplinarnim naporima istraživača u različitim oblastima nauke. Jedna od najizrazitijih tendencija ovog tipa uočava se u biomedicinskim istraživanjima, gde se združuju napori lekara, biologa, genetičara i biohemičara, s jedne strane, i biofizičara i inženjera, s druge strane – sa ciljem dubljeg razumevanja zdravlja i bolesti, i primene ovih saznanja u biomedicinskoj praksi, tako važnoj u svakodnevnom životu ljudi.Kao rezultat ovih svetskih trendova, u Srbiji već više godina na nekoliko fakulteta postoji nastava iz oblasti biomedicinskog inženjerstva, sa ciljem da osposobi inženjere ovih usmerenja za multidisciplinarno povezivanje znanja iz oblasti tehnike sa biomedicinskim znanjima. Jedan od bazičnih predmeta ovih usmerenja jesu Biomaterijali, kojima je i posvećen naš udžbenik, čiji je cilj da predstavi pregled teorije i prakse biomaterijala u biomedicinskoj nauci.Nauka o biomaterijalima je nesumnjivo najmultidisciplinarnija od svih nauka, jer zahteva ovladavanje znanjima iz mnogih oblasti nauke i tehnologije, inženjerstva i medicine, kako bi naučnici iz oblasti biomaterijala mogli da se uhvate u koštac sa ovom profesijom. Zato posle uvodnog dela, udžbenik iz Biomaterijala sadrži četiri celine: (I) Osnovni biomedicinski koncepti i reakcije organizma na biomaterijale, (II) Struktura, fizičko-mehanička karakterizacija i modeliranje biomaterijala i tkiva, (III) Savremeni biomaterijali i tehnologije, (IV) Perspektive biomaterijala i tehnologija, iza kojih slede Zadaci sa rešenjima, Ispitna test pitanja i Ispitna teorijska pitanja, koji pomažu studentima da lakše savladaju veoma obimno i kompleksno gradivo. Na kraju svakog poglavlja data su pitanja za rekapitulaciju, kao i spisak dopunske literature za opcionu detaljniju obradu pojedinih oblasti.Grupa od dvadeset četiri profesionalca sa univerziteta i naučnih instituta, pod okriljem Instituta tehničkih nauka Srpske akademije nauka i umetnosti, Beograd, i Društva za istraživanje materijala Srbije (MRS Srbija) doprinela je pisanju ovog kapitalnog udžbenika o biomaterijalima, prvog do sada na srpskom jeziku. Mada uključivanje veće grupe autora nužno dovodi do stilske neujednačenosti, ipak je oblast biomaterijala toliko multidisciplinarna da je ovakav pristup bio neophodan, kako uostalom pokazuju slična svetska iskustva sa uključivanjem i preko pedeset autora. Ipak urednici su se potrudili da koliko je to moguće stilski i pedagoški ujednače udžbenik, kako bi bio korisna literatura za sve studente diplomskih, master i doktorskih studija iz biomedicinskog inženjerstva u Srbiji i okruženju.
PB  - Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala
T1  - Biomaterijali
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7344
ER  - 
@book{
author = "Balać, Igor and Bugarski, Branko M. and Ćosić, Irena and Dramićanin, Miroslav and Đorđević, Drago and Filipović, Nenad D. and Ignjatović, Nenad L. and Janaćković, Đorđe T. and Kojić, Miloš and Manojlović, Verica and Marković, Zoran M. and Obradović, Bojana and Pajić-Lijaković, Ivana and Pavlović, Miodrag and Plavšić, Milenko and Raković, Dejan and Ranković, Vladimir and Stojanović, Boban and Trajković, Vladimir S. and Uskoković, Dragan and Uskoković, Petar and Veljković, Dejan and Vlastelica, Ivo and Vunjak Novaković, Gordana",
year = "2010",
abstract = "Početak XXI veka nesumnjivo je obeležen interdisciplinarnim i multidisciplinarnim naporima istraživača u različitim oblastima nauke. Jedna od najizrazitijih tendencija ovog tipa uočava se u biomedicinskim istraživanjima, gde se združuju napori lekara, biologa, genetičara i biohemičara, s jedne strane, i biofizičara i inženjera, s druge strane – sa ciljem dubljeg razumevanja zdravlja i bolesti, i primene ovih saznanja u biomedicinskoj praksi, tako važnoj u svakodnevnom životu ljudi.Kao rezultat ovih svetskih trendova, u Srbiji već više godina na nekoliko fakulteta postoji nastava iz oblasti biomedicinskog inženjerstva, sa ciljem da osposobi inženjere ovih usmerenja za multidisciplinarno povezivanje znanja iz oblasti tehnike sa biomedicinskim znanjima. Jedan od bazičnih predmeta ovih usmerenja jesu Biomaterijali, kojima je i posvećen naš udžbenik, čiji je cilj da predstavi pregled teorije i prakse biomaterijala u biomedicinskoj nauci.Nauka o biomaterijalima je nesumnjivo najmultidisciplinarnija od svih nauka, jer zahteva ovladavanje znanjima iz mnogih oblasti nauke i tehnologije, inženjerstva i medicine, kako bi naučnici iz oblasti biomaterijala mogli da se uhvate u koštac sa ovom profesijom. Zato posle uvodnog dela, udžbenik iz Biomaterijala sadrži četiri celine: (I) Osnovni biomedicinski koncepti i reakcije organizma na biomaterijale, (II) Struktura, fizičko-mehanička karakterizacija i modeliranje biomaterijala i tkiva, (III) Savremeni biomaterijali i tehnologije, (IV) Perspektive biomaterijala i tehnologija, iza kojih slede Zadaci sa rešenjima, Ispitna test pitanja i Ispitna teorijska pitanja, koji pomažu studentima da lakše savladaju veoma obimno i kompleksno gradivo. Na kraju svakog poglavlja data su pitanja za rekapitulaciju, kao i spisak dopunske literature za opcionu detaljniju obradu pojedinih oblasti.Grupa od dvadeset četiri profesionalca sa univerziteta i naučnih instituta, pod okriljem Instituta tehničkih nauka Srpske akademije nauka i umetnosti, Beograd, i Društva za istraživanje materijala Srbije (MRS Srbija) doprinela je pisanju ovog kapitalnog udžbenika o biomaterijalima, prvog do sada na srpskom jeziku. Mada uključivanje veće grupe autora nužno dovodi do stilske neujednačenosti, ipak je oblast biomaterijala toliko multidisciplinarna da je ovakav pristup bio neophodan, kako uostalom pokazuju slična svetska iskustva sa uključivanjem i preko pedeset autora. Ipak urednici su se potrudili da koliko je to moguće stilski i pedagoški ujednače udžbenik, kako bi bio korisna literatura za sve studente diplomskih, master i doktorskih studija iz biomedicinskog inženjerstva u Srbiji i okruženju.",
publisher = "Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala",
title = "Biomaterijali",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7344"
}
Balać, I., Bugarski, B. M., Ćosić, I., Dramićanin, M., Đorđević, D., Filipović, N. D., Ignjatović, N. L., Janaćković, Đ. T., Kojić, M., Manojlović, V., Marković, Z. M., Obradović, B., Pajić-Lijaković, I., Pavlović, M., Plavšić, M., Raković, D., Ranković, V., Stojanović, B., Trajković, V. S., Uskoković, D., Uskoković, P., Veljković, D., Vlastelica, I.,& Vunjak Novaković, G.. (2010). Biomaterijali. 
Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala..
https://hdl.handle.net/21.15107/rcub_vinar_7344
Balać I, Bugarski BM, Ćosić I, Dramićanin M, Đorđević D, Filipović ND, Ignjatović NL, Janaćković ĐT, Kojić M, Manojlović V, Marković ZM, Obradović B, Pajić-Lijaković I, Pavlović M, Plavšić M, Raković D, Ranković V, Stojanović B, Trajković VS, Uskoković D, Uskoković P, Veljković D, Vlastelica I, Vunjak Novaković G. Biomaterijali. 2010;.
https://hdl.handle.net/21.15107/rcub_vinar_7344 .
Balać, Igor, Bugarski, Branko M., Ćosić, Irena, Dramićanin, Miroslav, Đorđević, Drago, Filipović, Nenad D., Ignjatović, Nenad L., Janaćković, Đorđe T., Kojić, Miloš, Manojlović, Verica, Marković, Zoran M., Obradović, Bojana, Pajić-Lijaković, Ivana, Pavlović, Miodrag, Plavšić, Milenko, Raković, Dejan, Ranković, Vladimir, Stojanović, Boban, Trajković, Vladimir S., Uskoković, Dragan, Uskoković, Petar, Veljković, Dejan, Vlastelica, Ivo, Vunjak Novaković, Gordana, "Biomaterijali" (2010),
https://hdl.handle.net/21.15107/rcub_vinar_7344 .