Milutinovic-Nikolic, A.

Link to this page

Authority KeyName Variants
de43a1ad-6620-4cdc-9e15-33c67ec95f0a
  • Milutinovic-Nikolic, A. (3)
Projects

Author's Bibliography

Removal of Tc-99(VII) by organo-modified bentonite

Milutinovic-Nikolic, A.; Maksin, Danijela D.; Jovic-Jovicic, N.; Mirković, Marija D.; Stanković, Dalibor M.; Mojovic, Z.; Bankovic, P.

(2014)

TY  - JOUR
AU  - Milutinovic-Nikolic, A.
AU  - Maksin, Danijela D.
AU  - Jovic-Jovicic, N.
AU  - Mirković, Marija D.
AU  - Stanković, Dalibor M.
AU  - Mojovic, Z.
AU  - Bankovic, P.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6061
AB  - (99)Technetium is one of the largest components of nuclear waste material. In aqueous solutions Tc-99 is present as the pertechnetate oxoanion, (TcO4-)-Tc-99, which is highly soluble and mobile in groundwater under oxidizing conditions, thus posing a major environmental concern. In this study, a series of organo-modified bentonite clay samples was tested as adsorbents for the removal of radioactive (TcO4-)-Tc-99 from aqueous solution at room temperature. The influence of the hexadecyl trimethylammonium (HDTMA)/bentonite ratio on the adsorption ability of the organobentonites was investigated. It was found that the adsorbent in which the exchangeable cations were only partially substituted with HDTMA showed very low affinity toward pertechnetate. On the other hand, the adsorbents in which the HDTMA loading exceeded the cation exchange capacity (CEC) value had high efficiency. The behavior of such adsorbents was best described by a Freundlich isotherm, while for the sample in which the HDTMA loading was equal to the CEC, the linear adsorption isotherm was the most appropriate. The difference in adsorption performance of several adsorbents was discussed from the point of view of the interlayer arrangement of the HDTMA. The kinetics of pertechnetate adsorption on HDTMA-bentonites was tested and analyzed using different surface reaction- and diffusion-based kinetic models. For all the investigated adsorbents, the most appropriate kinetic model was the pseudo-second-order kinetics model. The obtained adsorption capacities were and HDTMA-bentonites with HDTMA loadings exceeding CEC value should be regarded as very promising adsorbents for the remediation of Tc-99 polluted waters. (C) 2014 Elsevier B.V. All rights reserved.
T2  - Applied Clay Science
T1  - Removal of Tc-99(VII) by organo-modified bentonite
VL  - 95
SP  - 294
EP  - 302
DO  - 10.1016/j.clay.2014.04.027
ER  - 
@article{
author = "Milutinovic-Nikolic, A. and Maksin, Danijela D. and Jovic-Jovicic, N. and Mirković, Marija D. and Stanković, Dalibor M. and Mojovic, Z. and Bankovic, P.",
year = "2014",
abstract = "(99)Technetium is one of the largest components of nuclear waste material. In aqueous solutions Tc-99 is present as the pertechnetate oxoanion, (TcO4-)-Tc-99, which is highly soluble and mobile in groundwater under oxidizing conditions, thus posing a major environmental concern. In this study, a series of organo-modified bentonite clay samples was tested as adsorbents for the removal of radioactive (TcO4-)-Tc-99 from aqueous solution at room temperature. The influence of the hexadecyl trimethylammonium (HDTMA)/bentonite ratio on the adsorption ability of the organobentonites was investigated. It was found that the adsorbent in which the exchangeable cations were only partially substituted with HDTMA showed very low affinity toward pertechnetate. On the other hand, the adsorbents in which the HDTMA loading exceeded the cation exchange capacity (CEC) value had high efficiency. The behavior of such adsorbents was best described by a Freundlich isotherm, while for the sample in which the HDTMA loading was equal to the CEC, the linear adsorption isotherm was the most appropriate. The difference in adsorption performance of several adsorbents was discussed from the point of view of the interlayer arrangement of the HDTMA. The kinetics of pertechnetate adsorption on HDTMA-bentonites was tested and analyzed using different surface reaction- and diffusion-based kinetic models. For all the investigated adsorbents, the most appropriate kinetic model was the pseudo-second-order kinetics model. The obtained adsorption capacities were and HDTMA-bentonites with HDTMA loadings exceeding CEC value should be regarded as very promising adsorbents for the remediation of Tc-99 polluted waters. (C) 2014 Elsevier B.V. All rights reserved.",
journal = "Applied Clay Science",
title = "Removal of Tc-99(VII) by organo-modified bentonite",
volume = "95",
pages = "294-302",
doi = "10.1016/j.clay.2014.04.027"
}
Milutinovic-Nikolic, A., Maksin, D. D., Jovic-Jovicic, N., Mirković, M. D., Stanković, D. M., Mojovic, Z.,& Bankovic, P.. (2014). Removal of Tc-99(VII) by organo-modified bentonite. in Applied Clay Science, 95, 294-302.
https://doi.org/10.1016/j.clay.2014.04.027
Milutinovic-Nikolic A, Maksin DD, Jovic-Jovicic N, Mirković MD, Stanković DM, Mojovic Z, Bankovic P. Removal of Tc-99(VII) by organo-modified bentonite. in Applied Clay Science. 2014;95:294-302.
doi:10.1016/j.clay.2014.04.027 .
Milutinovic-Nikolic, A., Maksin, Danijela D., Jovic-Jovicic, N., Mirković, Marija D., Stanković, Dalibor M., Mojovic, Z., Bankovic, P., "Removal of Tc-99(VII) by organo-modified bentonite" in Applied Clay Science, 95 (2014):294-302,
https://doi.org/10.1016/j.clay.2014.04.027 . .
31
22
31

Synthesis and characterization of bentonites rich in beidellite with incorporated Al or Al-Fe oxide pillars

Bankovic, P.; Milutinovic-Nikolic, A.; Mojovic, Z.; Jovic-Jovicic, N.; Perović, Marija M.; Spasojević, Vojislav; Jovanović, Dragana J.

(2013)

TY  - JOUR
AU  - Bankovic, P.
AU  - Milutinovic-Nikolic, A.
AU  - Mojovic, Z.
AU  - Jovic-Jovicic, N.
AU  - Perović, Marija M.
AU  - Spasojević, Vojislav
AU  - Jovanović, Dragana J.
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5162
AB  - Pillared clays (PILCs) based on bentonite clay from Bogovina (Serbia) were obtained using Al3+ and Fe3+ pillaring cations in different ratios. Thorough characterization of the starting material and PILCs was performed for better understanding of the catalytic activity that they had exibited in the catalytic wet peroxide oxidation (CWPO) of organic pollutants in water. The characterization consisted of the following techniques: XRD, XRD of oriented samples (swelling test), Greene-Kelley test (smectite type determination), TGA/DTA followed by XRD analysis of samples heated at characteristic temperatures, elemental analysis using ICP-OES and microwave digestion. FTIR, DR UV-Vis, Mossbauer spectroscopy, nitrogen physisorption at -196 degrees C and SEM imaging. Smectite in admixture with quartz was identified, together with impurities like feldspar, illite, chlorite and X-ray amorphous matter. Smectite mineral was dominantly of the beidellite type. Pillaring led to changes in the d(001) smectite basal spacing and stabilization of the smectite structure. Increasing Fe3+ content of the pillaring solutions resulted in the increased incorporation of iron into the PILCs as isolated octahedrally coordinated Fe3+ cations, smaller and bigger oligonuclear octahedrally coordinated Fe3+ species and octahedrally coordinated Fe3+ particles. The structure of incorporated pillars was similar to that of naturally occurring minerals akageneite and lepidocrocite. Micro- and mesoporosity were improved due to pillaring and the layered smectite structure was retained. (c) 2012 Elsevier Inc. All rights reserved.
T2  - Microporous and Mesoporous Materials
T1  - Synthesis and characterization of bentonites rich in beidellite with incorporated Al or Al-Fe oxide pillars
VL  - 165
SP  - 247
EP  - 256
DO  - 10.1016/j.micromeso.2012.08.029
ER  - 
@article{
author = "Bankovic, P. and Milutinovic-Nikolic, A. and Mojovic, Z. and Jovic-Jovicic, N. and Perović, Marija M. and Spasojević, Vojislav and Jovanović, Dragana J.",
year = "2013",
abstract = "Pillared clays (PILCs) based on bentonite clay from Bogovina (Serbia) were obtained using Al3+ and Fe3+ pillaring cations in different ratios. Thorough characterization of the starting material and PILCs was performed for better understanding of the catalytic activity that they had exibited in the catalytic wet peroxide oxidation (CWPO) of organic pollutants in water. The characterization consisted of the following techniques: XRD, XRD of oriented samples (swelling test), Greene-Kelley test (smectite type determination), TGA/DTA followed by XRD analysis of samples heated at characteristic temperatures, elemental analysis using ICP-OES and microwave digestion. FTIR, DR UV-Vis, Mossbauer spectroscopy, nitrogen physisorption at -196 degrees C and SEM imaging. Smectite in admixture with quartz was identified, together with impurities like feldspar, illite, chlorite and X-ray amorphous matter. Smectite mineral was dominantly of the beidellite type. Pillaring led to changes in the d(001) smectite basal spacing and stabilization of the smectite structure. Increasing Fe3+ content of the pillaring solutions resulted in the increased incorporation of iron into the PILCs as isolated octahedrally coordinated Fe3+ cations, smaller and bigger oligonuclear octahedrally coordinated Fe3+ species and octahedrally coordinated Fe3+ particles. The structure of incorporated pillars was similar to that of naturally occurring minerals akageneite and lepidocrocite. Micro- and mesoporosity were improved due to pillaring and the layered smectite structure was retained. (c) 2012 Elsevier Inc. All rights reserved.",
journal = "Microporous and Mesoporous Materials",
title = "Synthesis and characterization of bentonites rich in beidellite with incorporated Al or Al-Fe oxide pillars",
volume = "165",
pages = "247-256",
doi = "10.1016/j.micromeso.2012.08.029"
}
Bankovic, P., Milutinovic-Nikolic, A., Mojovic, Z., Jovic-Jovicic, N., Perović, M. M., Spasojević, V.,& Jovanović, D. J.. (2013). Synthesis and characterization of bentonites rich in beidellite with incorporated Al or Al-Fe oxide pillars. in Microporous and Mesoporous Materials, 165, 247-256.
https://doi.org/10.1016/j.micromeso.2012.08.029
Bankovic P, Milutinovic-Nikolic A, Mojovic Z, Jovic-Jovicic N, Perović MM, Spasojević V, Jovanović DJ. Synthesis and characterization of bentonites rich in beidellite with incorporated Al or Al-Fe oxide pillars. in Microporous and Mesoporous Materials. 2013;165:247-256.
doi:10.1016/j.micromeso.2012.08.029 .
Bankovic, P., Milutinovic-Nikolic, A., Mojovic, Z., Jovic-Jovicic, N., Perović, Marija M., Spasojević, Vojislav, Jovanović, Dragana J., "Synthesis and characterization of bentonites rich in beidellite with incorporated Al or Al-Fe oxide pillars" in Microporous and Mesoporous Materials, 165 (2013):247-256,
https://doi.org/10.1016/j.micromeso.2012.08.029 . .
50
39
48

Porous glycidyl methacrylate-bentonite composite

Marinovic, S.; Milutinovic-Nikolic, A.; Zunic, M.; Vuković, Zorica M.; Maksin, Danijela D.; Nastasović, Aleksandra B.; Jovanović, Dragana J.

(2011)

TY  - JOUR
AU  - Marinovic, S.
AU  - Milutinovic-Nikolic, A.
AU  - Zunic, M.
AU  - Vuković, Zorica M.
AU  - Maksin, Danijela D.
AU  - Nastasović, Aleksandra B.
AU  - Jovanović, Dragana J.
PY  - 2011
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4600
AB  - Crosslinked macroporous copolymer of glycidyl methacrylate and ethylene glycol dimethacrylate (CP) and copolymer composite with acid modified clay (CP-S-A) were prepared by radical suspension copolymerization and functionalized by ring-opening reaction of the pendant epoxy groups with diethylene triamine (CP-deta and CP-S-A-deta). Both S(A)mples were characterized by mercury porosimetry. The influence of pH, sorption time and initial 4-nitrophenol (4-NP) concentration on sorption efficiency of CP-deta and CP-S-A-deta was studied in order to evaluate this material as wastewater sorbent. The isotherm data were best fitted with Langmuir model, while the sorption dynamics obeyed the pseudo-second-order kinetic model.
T2  - Russian Journal of Physical Chemistry A
T1  - Porous glycidyl methacrylate-bentonite composite
VL  - 85
IS  - 13
SP  - 2386
EP  - 2391
DO  - 10.1134/S0036024411130103
ER  - 
@article{
author = "Marinovic, S. and Milutinovic-Nikolic, A. and Zunic, M. and Vuković, Zorica M. and Maksin, Danijela D. and Nastasović, Aleksandra B. and Jovanović, Dragana J.",
year = "2011",
abstract = "Crosslinked macroporous copolymer of glycidyl methacrylate and ethylene glycol dimethacrylate (CP) and copolymer composite with acid modified clay (CP-S-A) were prepared by radical suspension copolymerization and functionalized by ring-opening reaction of the pendant epoxy groups with diethylene triamine (CP-deta and CP-S-A-deta). Both S(A)mples were characterized by mercury porosimetry. The influence of pH, sorption time and initial 4-nitrophenol (4-NP) concentration on sorption efficiency of CP-deta and CP-S-A-deta was studied in order to evaluate this material as wastewater sorbent. The isotherm data were best fitted with Langmuir model, while the sorption dynamics obeyed the pseudo-second-order kinetic model.",
journal = "Russian Journal of Physical Chemistry A",
title = "Porous glycidyl methacrylate-bentonite composite",
volume = "85",
number = "13",
pages = "2386-2391",
doi = "10.1134/S0036024411130103"
}
Marinovic, S., Milutinovic-Nikolic, A., Zunic, M., Vuković, Z. M., Maksin, D. D., Nastasović, A. B.,& Jovanović, D. J.. (2011). Porous glycidyl methacrylate-bentonite composite. in Russian Journal of Physical Chemistry A, 85(13), 2386-2391.
https://doi.org/10.1134/S0036024411130103
Marinovic S, Milutinovic-Nikolic A, Zunic M, Vuković ZM, Maksin DD, Nastasović AB, Jovanović DJ. Porous glycidyl methacrylate-bentonite composite. in Russian Journal of Physical Chemistry A. 2011;85(13):2386-2391.
doi:10.1134/S0036024411130103 .
Marinovic, S., Milutinovic-Nikolic, A., Zunic, M., Vuković, Zorica M., Maksin, Danijela D., Nastasović, Aleksandra B., Jovanović, Dragana J., "Porous glycidyl methacrylate-bentonite composite" in Russian Journal of Physical Chemistry A, 85, no. 13 (2011):2386-2391,
https://doi.org/10.1134/S0036024411130103 . .
4
3
4