TY  - JOUR
AU  - Jovanović, Slaviša
AU  - Jovanović, Vojislav
AU  - Marković, Gordana
AU  - Samaržija-Jovanović, Suzana
AU  - Milićević, Zoran
AU  - Marinović-Cincović, Milena
AU  - Budinski-Simendić, Jaroslava K.
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8362
AB  - The elastomeric materials based on NR/BR/SBR ternary rubber blend were investigated. The polyisoprene (NR), butadiene (BR) and styrene butadiene (SBR) rubbers were used as network precursors and carbon black (CB) as an active filler (60 phr) for elastomeric materials preparation. For sample preparation, the mass ratio of NR to BR was constant, 1:1, but the SBR content was varied from 0 to 80 phr. The morphological, mechanical and thermal properties of prepared elastomeric materials were determined using scanning electron microscopy (SEM), mechanical tensile measurements and thermogravimetric analysis (TGA). Mechanical properties were assessed before and after thermooxidative aging during 168 h at 100 °C. The values of tensile strength, elongation at break, and hardness decrease up to 40 phr of SBR content and after that are increasing, but abrasion resistance of ternary rubber blends increases. The thermal decomposition temperature obviously shifted to a higher temperature for the sample with 40 phr of SBR. © 2019, CI and CEQ. All rights reserved.
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - Elastomers based on NR/BR/SBR ternary rubber blend: Morphological, mechanical and thermal properties
VL  - 25
IS  - 1
SP  - 31
EP  - 38
DO  - 10.2298/CICEQ171106016J
ER  - 

@article{
author = "Jovanović, Slaviša and Jovanović, Vojislav and Marković, Gordana and Samaržija-Jovanović, Suzana and Milićević, Zoran and Marinović-Cincović, Milena and Budinski-Simendić, Jaroslava K.",
year = "2018",
abstract = "The elastomeric materials based on NR/BR/SBR ternary rubber blend were investigated. The polyisoprene (NR), butadiene (BR) and styrene butadiene (SBR) rubbers were used as network precursors and carbon black (CB) as an active filler (60 phr) for elastomeric materials preparation. For sample preparation, the mass ratio of NR to BR was constant, 1:1, but the SBR content was varied from 0 to 80 phr. The morphological, mechanical and thermal properties of prepared elastomeric materials were determined using scanning electron microscopy (SEM), mechanical tensile measurements and thermogravimetric analysis (TGA). Mechanical properties were assessed before and after thermooxidative aging during 168 h at 100 °C. The values of tensile strength, elongation at break, and hardness decrease up to 40 phr of SBR content and after that are increasing, but abrasion resistance of ternary rubber blends increases. The thermal decomposition temperature obviously shifted to a higher temperature for the sample with 40 phr of SBR. © 2019, CI and CEQ. All rights reserved.",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "Elastomers based on NR/BR/SBR ternary rubber blend: Morphological, mechanical and thermal properties",
volume = "25",
number = "1",
pages = "31-38",
doi = "10.2298/CICEQ171106016J"
}

Jovanović, S., Jovanović, V., Marković, G., Samaržija-Jovanović, S., Milićević, Z., Marinović-Cincović, M.,& Budinski-Simendić, J. K.. (2018). Elastomers based on NR/BR/SBR ternary rubber blend: Morphological, mechanical and thermal properties. in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 25(1), 31-38.
https://doi.org/10.2298/CICEQ171106016J

Jovanović S, Jovanović V, Marković G, Samaržija-Jovanović S, Milićević Z, Marinović-Cincović M, Budinski-Simendić JK. Elastomers based on NR/BR/SBR ternary rubber blend: Morphological, mechanical and thermal properties. in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2018;25(1):31-38.
doi:10.2298/CICEQ171106016J .

Jovanović, Slaviša, Jovanović, Vojislav, Marković, Gordana, Samaržija-Jovanović, Suzana, Milićević, Zoran, Marinović-Cincović, Milena, Budinski-Simendić, Jaroslava K., "Elastomers based on NR/BR/SBR ternary rubber blend: Morphological, mechanical and thermal properties" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 25, no. 1 (2018):31-38,
https://doi.org/10.2298/CICEQ171106016J . .