TY  - JOUR
AU  - Dimitrijevic, Marija M.
AU  - Veljović, Đorđe N.
AU  - Pošarac-Marković, Milica B.
AU  - Jančić-Heinemann, Radmila
AU  - Volkov-Husović, Tatjana
AU  - Zrilic, Milorad
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5466
AB  - Alumina based refractories are usually used in metallurgical furnaces and their thermal shock resistance is of great importance. In order to improve thermal shock resistance and mechanical properties of alumina based refractories short ceramic fibers were added to the material. SEM technique was used to compare the microstructure of specimens and the observed images gave the porosity and morphological characteristics of pores in the specimens. Standard compression test was used to determine the modulus of elasticity and compression strength. Results obtained from thermal shock testing and mechanical properties measurements were used to establish regression models that correlated specimen properties to process parameters.
T2  - Science of Sintering
T1  - Mechanical Properties Correlation to Processing Parameters for Advanced Alumina Based Refractories
VL  - 44
IS  - 1
SP  - 25
EP  - 33
DO  - 10.2298/SOS1201025D
ER  - 

@article{
author = "Dimitrijevic, Marija M. and Veljović, Đorđe N. and Pošarac-Marković, Milica B. and Jančić-Heinemann, Radmila and Volkov-Husović, Tatjana and Zrilic, Milorad",
year = "2012",
abstract = "Alumina based refractories are usually used in metallurgical furnaces and their thermal shock resistance is of great importance. In order to improve thermal shock resistance and mechanical properties of alumina based refractories short ceramic fibers were added to the material. SEM technique was used to compare the microstructure of specimens and the observed images gave the porosity and morphological characteristics of pores in the specimens. Standard compression test was used to determine the modulus of elasticity and compression strength. Results obtained from thermal shock testing and mechanical properties measurements were used to establish regression models that correlated specimen properties to process parameters.",
journal = "Science of Sintering",
title = "Mechanical Properties Correlation to Processing Parameters for Advanced Alumina Based Refractories",
volume = "44",
number = "1",
pages = "25-33",
doi = "10.2298/SOS1201025D"
}

Dimitrijevic, M. M., Veljović, Đ. N., Pošarac-Marković, M. B., Jančić-Heinemann, R., Volkov-Husović, T.,& Zrilic, M.. (2012). Mechanical Properties Correlation to Processing Parameters for Advanced Alumina Based Refractories. in Science of Sintering, 44(1), 25-33.
https://doi.org/10.2298/SOS1201025D

Dimitrijevic MM, Veljović ĐN, Pošarac-Marković MB, Jančić-Heinemann R, Volkov-Husović T, Zrilic M. Mechanical Properties Correlation to Processing Parameters for Advanced Alumina Based Refractories. in Science of Sintering. 2012;44(1):25-33.
doi:10.2298/SOS1201025D .

Dimitrijevic, Marija M., Veljović, Đorđe N., Pošarac-Marković, Milica B., Jančić-Heinemann, Radmila, Volkov-Husović, Tatjana, Zrilic, Milorad, "Mechanical Properties Correlation to Processing Parameters for Advanced Alumina Based Refractories" in Science of Sintering, 44, no. 1 (2012):25-33,
https://doi.org/10.2298/SOS1201025D . .

TY  - CONF
AU  - Dimitrijevic, Marija M.
AU  - Jančić-Heinemann, Radmila
AU  - Volkov-Husović, Tatjana
AU  - Pošarac, Milica B.
AU  - Majstorović, Jelena
PY  - 2011
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6943
AB  - Thermal stability of the alumina based samples were measured using the water immersion test. Mechanical characteristics such as strength, dynamic modulus of elasticity resulting from resonance frequency measurements were considered. Image analysis was used to measure the fiber lengths distribution, homogeneity of fiber distribution in the matrix and finally the measurement and characterization of surface degradation of specimens during thermal stability testing. The morphology of resulting surface destruction was analyzed using mathematical morphology tools. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11
C3  - Procedia Engineering
T1  - Morphological analysis of surface degradation of advanced alumina based refactories subjected to thermal shock
VL  - 10
DO  - 10.1016/j.proeng.2011.04.356
ER  - 

@conference{
author = "Dimitrijevic, Marija M. and Jančić-Heinemann, Radmila and Volkov-Husović, Tatjana and Pošarac, Milica B. and Majstorović, Jelena",
year = "2011",
abstract = "Thermal stability of the alumina based samples were measured using the water immersion test. Mechanical characteristics such as strength, dynamic modulus of elasticity resulting from resonance frequency measurements were considered. Image analysis was used to measure the fiber lengths distribution, homogeneity of fiber distribution in the matrix and finally the measurement and characterization of surface degradation of specimens during thermal stability testing. The morphology of resulting surface destruction was analyzed using mathematical morphology tools. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11",
journal = "Procedia Engineering",
title = "Morphological analysis of surface degradation of advanced alumina based refactories subjected to thermal shock",
volume = "10",
doi = "10.1016/j.proeng.2011.04.356"
}

Dimitrijevic, M. M., Jančić-Heinemann, R., Volkov-Husović, T., Pošarac, M. B.,& Majstorović, J.. (2011). Morphological analysis of surface degradation of advanced alumina based refactories subjected to thermal shock. in Procedia Engineering, 10.
https://doi.org/10.1016/j.proeng.2011.04.356

Dimitrijevic MM, Jančić-Heinemann R, Volkov-Husović T, Pošarac MB, Majstorović J. Morphological analysis of surface degradation of advanced alumina based refactories subjected to thermal shock. in Procedia Engineering. 2011;10.
doi:10.1016/j.proeng.2011.04.356 .

Dimitrijevic, Marija M., Jančić-Heinemann, Radmila, Volkov-Husović, Tatjana, Pošarac, Milica B., Majstorović, Jelena, "Morphological analysis of surface degradation of advanced alumina based refactories subjected to thermal shock" in Procedia Engineering, 10 (2011),
https://doi.org/10.1016/j.proeng.2011.04.356 . .