TY  - JOUR
AU  - Terzić, Anja
AU  - Radulović, Dragan
AU  - Pezo, Milada L.
AU  - Stojanović, Jovica
AU  - Pezo, Lato
AU  - Radojević, Zagorka
AU  - Andrić, Ljubiša
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9042
AB  - The optimal outputs of pyrophyllite mechano-chemical activation in an ultra-centrifugal mill performing under different technological conditions were determined by analytical modeling and verified via Artificial Neural Network in order to be employed in the production of cement-based binders. Cluster Analysis and Principal Component Analysis were utilized in assessment of the effect of activation process parameters on the activated pyrophyllite quality. Artificial Neural Network which performed with high prediction accuracy, i.e. 0.914 during the training period, was sufficient for precise prediction of activated pyrophyllite quality in a wide range of processing parameters. The probability of utilization of observed activation products was estimated through interrelation of technological parameters (mesh size sieve, activation period, specific energy consumption) and acquired characteristics of pyrophyllite (grain diameter, specific surface area). The optimal products singled out from each activation sequence were used as mineral additives in the mix-designs of four cement binders (cement replacement portion was 30%). Influence of activated pyrophyllite additions on the cement chemistry, mineral phase compositions and microstructures of the cement binders were monitored by instrumental techniques (DTA/TGA, XRD, SEM). Activated pyrophyllite showed characteristics of pozzolana as it slightly accelerated early stages of hydration, decreased cement hydration energy and increased the quantity of cement mineral alite at later hydration stages. Micron-sized crystalline foila characteristic for mechanically activated pyrophyllite formed micro-reinforcement within cement binder microstructure.
T2  - Construction and Building Materials
T1  - Prediction model based on artificial neural network for pyrophyllite mechano-chemical activation as an integral step in production of cement binders
VL  - 258
SP  - 119721
DO  - 10.1016/j.conbuildmat.2020.119721
ER  - 

@article{
author = "Terzić, Anja and Radulović, Dragan and Pezo, Milada L. and Stojanović, Jovica and Pezo, Lato and Radojević, Zagorka and Andrić, Ljubiša",
year = "2020",
abstract = "The optimal outputs of pyrophyllite mechano-chemical activation in an ultra-centrifugal mill performing under different technological conditions were determined by analytical modeling and verified via Artificial Neural Network in order to be employed in the production of cement-based binders. Cluster Analysis and Principal Component Analysis were utilized in assessment of the effect of activation process parameters on the activated pyrophyllite quality. Artificial Neural Network which performed with high prediction accuracy, i.e. 0.914 during the training period, was sufficient for precise prediction of activated pyrophyllite quality in a wide range of processing parameters. The probability of utilization of observed activation products was estimated through interrelation of technological parameters (mesh size sieve, activation period, specific energy consumption) and acquired characteristics of pyrophyllite (grain diameter, specific surface area). The optimal products singled out from each activation sequence were used as mineral additives in the mix-designs of four cement binders (cement replacement portion was 30%). Influence of activated pyrophyllite additions on the cement chemistry, mineral phase compositions and microstructures of the cement binders were monitored by instrumental techniques (DTA/TGA, XRD, SEM). Activated pyrophyllite showed characteristics of pozzolana as it slightly accelerated early stages of hydration, decreased cement hydration energy and increased the quantity of cement mineral alite at later hydration stages. Micron-sized crystalline foila characteristic for mechanically activated pyrophyllite formed micro-reinforcement within cement binder microstructure.",
journal = "Construction and Building Materials",
title = "Prediction model based on artificial neural network for pyrophyllite mechano-chemical activation as an integral step in production of cement binders",
volume = "258",
pages = "119721",
doi = "10.1016/j.conbuildmat.2020.119721"
}

Terzić, A., Radulović, D., Pezo, M. L., Stojanović, J., Pezo, L., Radojević, Z.,& Andrić, L.. (2020). Prediction model based on artificial neural network for pyrophyllite mechano-chemical activation as an integral step in production of cement binders. in Construction and Building Materials, 258, 119721.
https://doi.org/10.1016/j.conbuildmat.2020.119721

Terzić A, Radulović D, Pezo ML, Stojanović J, Pezo L, Radojević Z, Andrić L. Prediction model based on artificial neural network for pyrophyllite mechano-chemical activation as an integral step in production of cement binders. in Construction and Building Materials. 2020;258:119721.
doi:10.1016/j.conbuildmat.2020.119721 .

Terzić, Anja, Radulović, Dragan, Pezo, Milada L., Stojanović, Jovica, Pezo, Lato, Radojević, Zagorka, Andrić, Ljubiša, "Prediction model based on artificial neural network for pyrophyllite mechano-chemical activation as an integral step in production of cement binders" in Construction and Building Materials, 258 (2020):119721,
https://doi.org/10.1016/j.conbuildmat.2020.119721 . .

TY  - JOUR
AU  - Pezo, Milada L.
AU  - Pezo, Lato
AU  - Jovanović, Aca
AU  - Terzić, Anja
AU  - Andrić, Ljubiša
AU  - Lončar, Biljana
AU  - Kojić, Predrag
PY  - 2018
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0032591018304480
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7719
AB  - In this paper, five types of horizontal single-pitch screw conveyors with modified geometry, with three different lengths (400, 600 and 800 mm) were investigated for transport and auxiliary mixing action of two materials: natural zeolite and quartz aggregate (sand) with particle sizes 3, 4 and 5 mm. The geometry of the screw transporter is changed by welding three additional helices oriented in the same or the opposite direction from screw cutting edges, enabling the premixing of materials, during the transport. The proper mixing of the observed materials provides an adequate disposition of zeolite particles within the composite and prevents agglomeration and interference with cement hydration. Zeolite application as a binder in a building material is a possible solution to environmental pollution problems caused by cement production. The influences of screw length, particle diameter, the studied geometry variations of screw design, on the mixing performances of the screw conveyor-mixer during material transport were explored. All investigations were performed experimentally and numerically, by using Discrete Element Method (DEM). The experimental results and the results of the DEM investigation were used for the development of mathematical models for the prediction of mixing quality, which are presented in the form of second order polynomial and artificial neural network model.
T2  - Powder Technology
T1  - Discrete element model of particle transport and premixing action in modified screw conveyors
VL  - 336
SP  - 255
EP  - 264
DO  - 10.1016/j.powtec.2018.06.009
ER  - 

@article{
author = "Pezo, Milada L. and Pezo, Lato and Jovanović, Aca and Terzić, Anja and Andrić, Ljubiša and Lončar, Biljana and Kojić, Predrag",
year = "2018",
abstract = "In this paper, five types of horizontal single-pitch screw conveyors with modified geometry, with three different lengths (400, 600 and 800 mm) were investigated for transport and auxiliary mixing action of two materials: natural zeolite and quartz aggregate (sand) with particle sizes 3, 4 and 5 mm. The geometry of the screw transporter is changed by welding three additional helices oriented in the same or the opposite direction from screw cutting edges, enabling the premixing of materials, during the transport. The proper mixing of the observed materials provides an adequate disposition of zeolite particles within the composite and prevents agglomeration and interference with cement hydration. Zeolite application as a binder in a building material is a possible solution to environmental pollution problems caused by cement production. The influences of screw length, particle diameter, the studied geometry variations of screw design, on the mixing performances of the screw conveyor-mixer during material transport were explored. All investigations were performed experimentally and numerically, by using Discrete Element Method (DEM). The experimental results and the results of the DEM investigation were used for the development of mathematical models for the prediction of mixing quality, which are presented in the form of second order polynomial and artificial neural network model.",
journal = "Powder Technology",
title = "Discrete element model of particle transport and premixing action in modified screw conveyors",
volume = "336",
pages = "255-264",
doi = "10.1016/j.powtec.2018.06.009"
}

Pezo, M. L., Pezo, L., Jovanović, A., Terzić, A., Andrić, L., Lončar, B.,& Kojić, P.. (2018). Discrete element model of particle transport and premixing action in modified screw conveyors. in Powder Technology, 336, 255-264.
https://doi.org/10.1016/j.powtec.2018.06.009

Pezo ML, Pezo L, Jovanović A, Terzić A, Andrić L, Lončar B, Kojić P. Discrete element model of particle transport and premixing action in modified screw conveyors. in Powder Technology. 2018;336:255-264.
doi:10.1016/j.powtec.2018.06.009 .

Pezo, Milada L., Pezo, Lato, Jovanović, Aca, Terzić, Anja, Andrić, Ljubiša, Lončar, Biljana, Kojić, Predrag, "Discrete element model of particle transport and premixing action in modified screw conveyors" in Powder Technology, 336 (2018):255-264,
https://doi.org/10.1016/j.powtec.2018.06.009 . .