TY  - JOUR
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Lević, Steva
AU  - Mitrović, Nebojša
AU  - Maričić, Aleksa
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://doi.org/10.1007/s40145-018-0301-5
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8103
AB  - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.
T2  - Journal of Advanced Ceramics
T1  - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure
VL  - 8
IS  - 1
SP  - 133
EP  - 147
DO  - 10.1007/s40145-018-0301-5
ER  - 

@article{
author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.",
journal = "Journal of Advanced Ceramics",
title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure",
volume = "8",
number = "1",
pages = "133-147",
doi = "10.1007/s40145-018-0301-5"
}

Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B.. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics, 8(1), 133-147.
https://doi.org/10.1007/s40145-018-0301-5

Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics. 2019;8(1):133-147.
doi:10.1007/s40145-018-0301-5 .

Filipović, Suzana, Pavlović, Vera P., Mitrić, Miodrag, Lević, Steva, Mitrović, Nebojša, Maričić, Aleksa, Vlahović, Branislav, Pavlović, Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" in Journal of Advanced Ceramics, 8, no. 1 (2019):133-147,
https://doi.org/10.1007/s40145-018-0301-5 . .

TY  - CONF
AU  - Kosanović, Darko
AU  - Filipović, Suzana
AU  - Mitrić, Miodrag
AU  - Marković, Smilja
AU  - Obradović, Nina
AU  - Maričić, Aleksa
AU  - Živojinović, Jelena
AU  - Ristić, Momčilo M.
AU  - Dukić, Milan
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/631
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7498
AB  - Ba0.8Sr0.2TiO3 was prepared from the starting materials BaCO3, SrCO3 and TiO2 through solid state reaction. Mixture of these oxides was mechanically activated using a high-energy ball mill at different time intervals from 0 to 120 minutes. The crystal structure was determined by X-ray diffraction to obtain information about the composition of phase variation. It was observed that after 40 minutes occurred early synthesis Ba0.8Sr0.2TiO3. Particle size distribution along with scanning electron microscopy gave very useful information about powder morphology.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia
T1  - Mechanochemical synthesis Ba0.8Sr0.2TiO3
SP  - 13
EP  - 13
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7498
ER  - 

@conference{
author = "Kosanović, Darko and Filipović, Suzana and Mitrić, Miodrag and Marković, Smilja and Obradović, Nina and Maričić, Aleksa and Živojinović, Jelena and Ristić, Momčilo M. and Dukić, Milan",
year = "2011",
abstract = "Ba0.8Sr0.2TiO3 was prepared from the starting materials BaCO3, SrCO3 and TiO2 through solid state reaction. Mixture of these oxides was mechanically activated using a high-energy ball mill at different time intervals from 0 to 120 minutes. The crystal structure was determined by X-ray diffraction to obtain information about the composition of phase variation. It was observed that after 40 minutes occurred early synthesis Ba0.8Sr0.2TiO3. Particle size distribution along with scanning electron microscopy gave very useful information about powder morphology.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia",
title = "Mechanochemical synthesis Ba0.8Sr0.2TiO3",
pages = "13-13",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7498"
}

Kosanović, D., Filipović, S., Mitrić, M., Marković, S., Obradović, N., Maričić, A., Živojinović, J., Ristić, M. M.,& Dukić, M.. (2011). Mechanochemical synthesis Ba0.8Sr0.2TiO3. in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 13-13.
https://hdl.handle.net/21.15107/rcub_vinar_7498

Kosanović D, Filipović S, Mitrić M, Marković S, Obradović N, Maričić A, Živojinović J, Ristić MM, Dukić M. Mechanochemical synthesis Ba0.8Sr0.2TiO3. in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia. 2011;:13-13.
https://hdl.handle.net/21.15107/rcub_vinar_7498 .

Kosanović, Darko, Filipović, Suzana, Mitrić, Miodrag, Marković, Smilja, Obradović, Nina, Maričić, Aleksa, Živojinović, Jelena, Ristić, Momčilo M., Dukić, Milan, "Mechanochemical synthesis Ba0.8Sr0.2TiO3" in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia (2011):13-13,
https://hdl.handle.net/21.15107/rcub_vinar_7498 .

TY  - CONF
AU  - Kosanović, Darko
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Mitrić, Miodrag
AU  - Marković, Smilja
AU  - Maričić, Aleksa
AU  - Pavlović, Vladimir B.
AU  - Ristić, Momčilo M.
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/630
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7497
AB  - Ba0.8Sr0.2TiO3 was prepared from the starting materials BaCO3, SrCO3 and TiO2 through solid state reaction. Mixtures of these oxides were mechanically activated using a high-energy ball mill at different time intervals from 0 to 120 minutes. X-ray diffraction was employed in order to determine the crystal structure and gave information about composition of phase variation. It was observed that after 40 minutes early synthesis of Ba0.8Sr0.2TiO3 phase occurred. Particle size distribution along with scanning electron microscopy gave very useful information about powder morphology.
PB  - Belgrade : Materials Research Society of Serbia
C3  - The Thirteenth Annual Conference YUCOMAT 2011: Programme and the Book of Abstracts
T1  - Mechanochemical synthesis of Ba0.8Sr0.2TiO3
SP  - 134
EP  - 134
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7497
ER  - 

@conference{
author = "Kosanović, Darko and Filipović, Suzana and Obradović, Nina and Mitrić, Miodrag and Marković, Smilja and Maričić, Aleksa and Pavlović, Vladimir B. and Ristić, Momčilo M.",
year = "2011",
abstract = "Ba0.8Sr0.2TiO3 was prepared from the starting materials BaCO3, SrCO3 and TiO2 through solid state reaction. Mixtures of these oxides were mechanically activated using a high-energy ball mill at different time intervals from 0 to 120 minutes. X-ray diffraction was employed in order to determine the crystal structure and gave information about composition of phase variation. It was observed that after 40 minutes early synthesis of Ba0.8Sr0.2TiO3 phase occurred. Particle size distribution along with scanning electron microscopy gave very useful information about powder morphology.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "The Thirteenth Annual Conference YUCOMAT 2011: Programme and the Book of Abstracts",
title = "Mechanochemical synthesis of Ba0.8Sr0.2TiO3",
pages = "134-134",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7497"
}

Kosanović, D., Filipović, S., Obradović, N., Mitrić, M., Marković, S., Maričić, A., Pavlović, V. B.,& Ristić, M. M.. (2011). Mechanochemical synthesis of Ba0.8Sr0.2TiO3. in The Thirteenth Annual Conference YUCOMAT 2011: Programme and the Book of Abstracts
Belgrade : Materials Research Society of Serbia., 134-134.
https://hdl.handle.net/21.15107/rcub_vinar_7497

Kosanović D, Filipović S, Obradović N, Mitrić M, Marković S, Maričić A, Pavlović VB, Ristić MM. Mechanochemical synthesis of Ba0.8Sr0.2TiO3. in The Thirteenth Annual Conference YUCOMAT 2011: Programme and the Book of Abstracts. 2011;:134-134.
https://hdl.handle.net/21.15107/rcub_vinar_7497 .

Kosanović, Darko, Filipović, Suzana, Obradović, Nina, Mitrić, Miodrag, Marković, Smilja, Maričić, Aleksa, Pavlović, Vladimir B., Ristić, Momčilo M., "Mechanochemical synthesis of Ba0.8Sr0.2TiO3" in The Thirteenth Annual Conference YUCOMAT 2011: Programme and the Book of Abstracts (2011):134-134,
https://hdl.handle.net/21.15107/rcub_vinar_7497 .