Šćepanović, Maja

Link to this page

Authority KeyName Variants
orcid::0000-0002-6791-5622
  • Šćepanović, Maja (20)
  • Scepanovic, MJ (2)
  • Šćepanović, Maja J. (1)

Author's Bibliography

Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method

Simovic, Bojana; Poleti, Dejan; Golubović, Aleksandar V.; Matković, Aleksandar; Šćepanović, Maja; Babić, Biljana M.; Branković, Goran O.

(2017)

TY  - JOUR
AU  - Simovic, Bojana
AU  - Poleti, Dejan
AU  - Golubović, Aleksandar V.
AU  - Matković, Aleksandar
AU  - Šćepanović, Maja
AU  - Babić, Biljana M.
AU  - Branković, Goran O.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1523
AB  - In this work, Zn(CH3 COO)(2) 2 H-2 O with AgNO3 content from 0 to 6 mol% was solvothermally treated at 120 C for 18 h in the presence of poly(vinyl pyrrolidone), ethylene glycol and sodium hydroxide. The structural , microstructural and photocatalytic properties of the unmodified and Ag modified ZnO powders have been investigated by the XRPD, FESEM, TEM, UV-vis, Raman and BET techniques. The Ag modified samples consist of ZnO nanocrystals and metallic Ag on the surface. The average crystallite size of all samples was about 20 nm. The FESEM revealed the uniformity in size and approximately spherical shape of ZnO nanopar-ticles. The BET data suggest that all prepared samples are mesoporous. All prepared samples showed higher photocatalytic efficiency in the degradation of the Reactive Orange 16 (RO16) azo dye than the commercial ZnO. In addition, Ag modified ZnO powders, especially those with 1.5 and 0.75 mol% of Ag, were more efficient than the unmodified one.
T2  - Processing and Application of Ceramics
T1  - Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method
VL  - 11
IS  - 1
SP  - 27
EP  - 38
DO  - 10.2298/PAC1701027S
ER  - 
@article{
author = "Simovic, Bojana and Poleti, Dejan and Golubović, Aleksandar V. and Matković, Aleksandar and Šćepanović, Maja and Babić, Biljana M. and Branković, Goran O.",
year = "2017",
abstract = "In this work, Zn(CH3 COO)(2) 2 H-2 O with AgNO3 content from 0 to 6 mol% was solvothermally treated at 120 C for 18 h in the presence of poly(vinyl pyrrolidone), ethylene glycol and sodium hydroxide. The structural , microstructural and photocatalytic properties of the unmodified and Ag modified ZnO powders have been investigated by the XRPD, FESEM, TEM, UV-vis, Raman and BET techniques. The Ag modified samples consist of ZnO nanocrystals and metallic Ag on the surface. The average crystallite size of all samples was about 20 nm. The FESEM revealed the uniformity in size and approximately spherical shape of ZnO nanopar-ticles. The BET data suggest that all prepared samples are mesoporous. All prepared samples showed higher photocatalytic efficiency in the degradation of the Reactive Orange 16 (RO16) azo dye than the commercial ZnO. In addition, Ag modified ZnO powders, especially those with 1.5 and 0.75 mol% of Ag, were more efficient than the unmodified one.",
journal = "Processing and Application of Ceramics",
title = "Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method",
volume = "11",
number = "1",
pages = "27-38",
doi = "10.2298/PAC1701027S"
}
Simovic, B., Poleti, D., Golubović, A. V., Matković, A., Šćepanović, M., Babić, B. M.,& Branković, G. O.. (2017). Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method. in Processing and Application of Ceramics, 11(1), 27-38.
https://doi.org/10.2298/PAC1701027S
Simovic B, Poleti D, Golubović AV, Matković A, Šćepanović M, Babić BM, Branković GO. Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method. in Processing and Application of Ceramics. 2017;11(1):27-38.
doi:10.2298/PAC1701027S .
Simovic, Bojana, Poleti, Dejan, Golubović, Aleksandar V., Matković, Aleksandar, Šćepanović, Maja, Babić, Biljana M., Branković, Goran O., "Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method" in Processing and Application of Ceramics, 11, no. 1 (2017):27-38,
https://doi.org/10.2298/PAC1701027S . .
7
8
8

Sol-gel Synthesis of Anatase Nanopowders for Efficient Photocatalytic Degradation of Herbicide Clomazone in Aqueous Media

Golubović, Aleksandar V.; Simovic, Bojana; Gašić, Slavica M.; Mijin, Dušan Ž.; Matković, Aleksandar; Babić, Biljana M.; Šćepanović, Maja

(2017)

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Simovic, Bojana
AU  - Gašić, Slavica M.
AU  - Mijin, Dušan Ž.
AU  - Matković, Aleksandar
AU  - Babić, Biljana M.
AU  - Šćepanović, Maja
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1779
AB  - TiO2 nanopowders were produced by sol-gel technique using TiCl4 as a starting material. For the preparation of crystalline anatase with developed surface area, this aqueous solution has been mixed with 0.05 M or 0.07 M (NH4)(2)SO4 solution in a temperature-controlled bath. The pH values of the suspension were 7, 8 or 9. According to the x-ray diffraction (XRD) analysis the anatase crystallite sizes were about 12 nm, which coincided with the average particle size revealed by scanning electron microscopy (SEM). The Raman scattering measurements have shown the presence of a small amount of highly disordered brookite phase in addition to dominant anatase phase with similar nanostructure in all synthesized powders. BET measurements revealed that all synthesized catalysts were fully mesoporous, except the sample synthesized with 0.07 M (NH4)(2)SO4 at pH=9, which had small amount of micropores. The photocatalytic degradation of herbicide Clomazone was carried out for both the pure active substance and as the commercial product (GAMIT 4-EC) under UV irradiation. The best photocatalytic efficiency was obtained for the catalyst with the largest specific surface area, confirming this parameter as crucial for enhanced photocatalytic degradation of the pure active substance and commercial product of herbicide Clomazone.
T2  - Science of Sintering
T1  - Sol-gel Synthesis of Anatase Nanopowders for Efficient Photocatalytic Degradation of Herbicide Clomazone in Aqueous Media
VL  - 49
IS  - 3
SP  - 319
EP  - 330
DO  - 10.2298/SOS1703319G
ER  - 
@article{
author = "Golubović, Aleksandar V. and Simovic, Bojana and Gašić, Slavica M. and Mijin, Dušan Ž. and Matković, Aleksandar and Babić, Biljana M. and Šćepanović, Maja",
year = "2017",
abstract = "TiO2 nanopowders were produced by sol-gel technique using TiCl4 as a starting material. For the preparation of crystalline anatase with developed surface area, this aqueous solution has been mixed with 0.05 M or 0.07 M (NH4)(2)SO4 solution in a temperature-controlled bath. The pH values of the suspension were 7, 8 or 9. According to the x-ray diffraction (XRD) analysis the anatase crystallite sizes were about 12 nm, which coincided with the average particle size revealed by scanning electron microscopy (SEM). The Raman scattering measurements have shown the presence of a small amount of highly disordered brookite phase in addition to dominant anatase phase with similar nanostructure in all synthesized powders. BET measurements revealed that all synthesized catalysts were fully mesoporous, except the sample synthesized with 0.07 M (NH4)(2)SO4 at pH=9, which had small amount of micropores. The photocatalytic degradation of herbicide Clomazone was carried out for both the pure active substance and as the commercial product (GAMIT 4-EC) under UV irradiation. The best photocatalytic efficiency was obtained for the catalyst with the largest specific surface area, confirming this parameter as crucial for enhanced photocatalytic degradation of the pure active substance and commercial product of herbicide Clomazone.",
journal = "Science of Sintering",
title = "Sol-gel Synthesis of Anatase Nanopowders for Efficient Photocatalytic Degradation of Herbicide Clomazone in Aqueous Media",
volume = "49",
number = "3",
pages = "319-330",
doi = "10.2298/SOS1703319G"
}
Golubović, A. V., Simovic, B., Gašić, S. M., Mijin, D. Ž., Matković, A., Babić, B. M.,& Šćepanović, M.. (2017). Sol-gel Synthesis of Anatase Nanopowders for Efficient Photocatalytic Degradation of Herbicide Clomazone in Aqueous Media. in Science of Sintering, 49(3), 319-330.
https://doi.org/10.2298/SOS1703319G
Golubović AV, Simovic B, Gašić SM, Mijin DŽ, Matković A, Babić BM, Šćepanović M. Sol-gel Synthesis of Anatase Nanopowders for Efficient Photocatalytic Degradation of Herbicide Clomazone in Aqueous Media. in Science of Sintering. 2017;49(3):319-330.
doi:10.2298/SOS1703319G .
Golubović, Aleksandar V., Simovic, Bojana, Gašić, Slavica M., Mijin, Dušan Ž., Matković, Aleksandar, Babić, Biljana M., Šćepanović, Maja, "Sol-gel Synthesis of Anatase Nanopowders for Efficient Photocatalytic Degradation of Herbicide Clomazone in Aqueous Media" in Science of Sintering, 49, no. 3 (2017):319-330,
https://doi.org/10.2298/SOS1703319G . .
2

Cracking caused by cutting of plasma-sprayed hydroxyapatite coatings and its relation to the structural features of coatings deposited at different initial substrate temperatures

Gligorijević, Bojan R.; Vilotijević, Miroljub N.; Šćepanović, Maja J.; Radovanovic, Radovan V.; Radović, Nenad A.

(2017)

TY  - JOUR
AU  - Gligorijević, Bojan R.
AU  - Vilotijević, Miroljub N.
AU  - Šćepanović, Maja J.
AU  - Radovanovic, Radovan V.
AU  - Radović, Nenad A.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1669
AB  - The present study estimated the cracking phenomenon in as-plasma-sprayed hydroxylapatite coatings (HACs) after they were being subjected to the severe cutting conditions in the direction perpendicular to the coating/substrate interface. In order to evaluate the effects of substrate preheating on the occurrence of micro-cracks, the HACs were deposited at different initial substrate temperatures (T-S = 20, 100 and 200 degrees C). The changes in phase composition and HA splat morphology with T-S were observed and were correlated with the cracking occurrence. The results showed that severe cutting conditions introduced a localized cracking in the regions of HACs dominantly attributed to the brittle hydroxyl- deficient amorphous calcium phosphate (ACP) phase. This effect was particularly observable in the HACs deposited without preheating of substrate. On the other hand, the preheating of substrate reduced the presence of micro-cracks and caused insignificant changes in the average local phase composition. In HACs deposited with preheating of substrate, the HA splats (of which HACs are composed) were thinner and recrystallized HA regions seemed smaller in size and more evenly distributed. These results implied potentially important roles of the HA splat formation mechanism on the distribution of ACP and recrystallized HA regions in the as-plasma-sprayed HACs and the cracking resistance of HACs.
T2  - Hemijska industrija
T1  - Cracking caused by cutting of plasma-sprayed hydroxyapatite coatings and its relation to the structural features of coatings deposited at different initial substrate temperatures
VL  - 71
IS  - 3
SP  - 241
EP  - 249
DO  - 10.2298/HEMIND160513034G
ER  - 
@article{
author = "Gligorijević, Bojan R. and Vilotijević, Miroljub N. and Šćepanović, Maja J. and Radovanovic, Radovan V. and Radović, Nenad A.",
year = "2017",
abstract = "The present study estimated the cracking phenomenon in as-plasma-sprayed hydroxylapatite coatings (HACs) after they were being subjected to the severe cutting conditions in the direction perpendicular to the coating/substrate interface. In order to evaluate the effects of substrate preheating on the occurrence of micro-cracks, the HACs were deposited at different initial substrate temperatures (T-S = 20, 100 and 200 degrees C). The changes in phase composition and HA splat morphology with T-S were observed and were correlated with the cracking occurrence. The results showed that severe cutting conditions introduced a localized cracking in the regions of HACs dominantly attributed to the brittle hydroxyl- deficient amorphous calcium phosphate (ACP) phase. This effect was particularly observable in the HACs deposited without preheating of substrate. On the other hand, the preheating of substrate reduced the presence of micro-cracks and caused insignificant changes in the average local phase composition. In HACs deposited with preheating of substrate, the HA splats (of which HACs are composed) were thinner and recrystallized HA regions seemed smaller in size and more evenly distributed. These results implied potentially important roles of the HA splat formation mechanism on the distribution of ACP and recrystallized HA regions in the as-plasma-sprayed HACs and the cracking resistance of HACs.",
journal = "Hemijska industrija",
title = "Cracking caused by cutting of plasma-sprayed hydroxyapatite coatings and its relation to the structural features of coatings deposited at different initial substrate temperatures",
volume = "71",
number = "3",
pages = "241-249",
doi = "10.2298/HEMIND160513034G"
}
Gligorijević, B. R., Vilotijević, M. N., Šćepanović, M. J., Radovanovic, R. V.,& Radović, N. A.. (2017). Cracking caused by cutting of plasma-sprayed hydroxyapatite coatings and its relation to the structural features of coatings deposited at different initial substrate temperatures. in Hemijska industrija, 71(3), 241-249.
https://doi.org/10.2298/HEMIND160513034G
Gligorijević BR, Vilotijević MN, Šćepanović MJ, Radovanovic RV, Radović NA. Cracking caused by cutting of plasma-sprayed hydroxyapatite coatings and its relation to the structural features of coatings deposited at different initial substrate temperatures. in Hemijska industrija. 2017;71(3):241-249.
doi:10.2298/HEMIND160513034G .
Gligorijević, Bojan R., Vilotijević, Miroljub N., Šćepanović, Maja J., Radovanovic, Radovan V., Radović, Nenad A., "Cracking caused by cutting of plasma-sprayed hydroxyapatite coatings and its relation to the structural features of coatings deposited at different initial substrate temperatures" in Hemijska industrija, 71, no. 3 (2017):241-249,
https://doi.org/10.2298/HEMIND160513034G . .

Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants

Golubović, Aleksandar V.; Veljkovic, Ivana; Šćepanović, Maja; Grujić-Brojčin, Mirjana; Tomic, Natasa; Mijin, Dušan Ž.; Babić, Biljana M.

(2016)

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Veljkovic, Ivana
AU  - Šćepanović, Maja
AU  - Grujić-Brojčin, Mirjana
AU  - Tomic, Natasa
AU  - Mijin, Dušan Ž.
AU  - Babić, Biljana M.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1020
AB  - Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration of calcination (1.5, 2 and 2.5 h). X-ray powder diffraction (XRPD) results have shown that all synthesized nanopowders were dominantly in the anatase phase, with the presence of a small amount of rutile in samples calcined at 550 degrees C. According to the results obtained by the Williamson-Hall method, the anatase crystallite size was increased with the duration of the calcination (from 24 to 29 nm in samples calcined at lower temperature, and from 30 to 35 nm in samples calcined at higher temperature). The analysis of the shift and line-width of the most intensive anatase Eg Raman mode confirmed the XRPD results. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 5-8 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16), car-bofuran ray scattering.
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants
VL  - 22
IS  - 1
SP  - 65
EP  - 73
DO  - 10.2298/CICEQ150110020G
ER  - 
@article{
author = "Golubović, Aleksandar V. and Veljkovic, Ivana and Šćepanović, Maja and Grujić-Brojčin, Mirjana and Tomic, Natasa and Mijin, Dušan Ž. and Babić, Biljana M.",
year = "2016",
abstract = "Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration of calcination (1.5, 2 and 2.5 h). X-ray powder diffraction (XRPD) results have shown that all synthesized nanopowders were dominantly in the anatase phase, with the presence of a small amount of rutile in samples calcined at 550 degrees C. According to the results obtained by the Williamson-Hall method, the anatase crystallite size was increased with the duration of the calcination (from 24 to 29 nm in samples calcined at lower temperature, and from 30 to 35 nm in samples calcined at higher temperature). The analysis of the shift and line-width of the most intensive anatase Eg Raman mode confirmed the XRPD results. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 5-8 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16), car-bofuran ray scattering.",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants",
volume = "22",
number = "1",
pages = "65-73",
doi = "10.2298/CICEQ150110020G"
}
Golubović, A. V., Veljkovic, I., Šćepanović, M., Grujić-Brojčin, M., Tomic, N., Mijin, D. Ž.,& Babić, B. M.. (2016). Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants. in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 22(1), 65-73.
https://doi.org/10.2298/CICEQ150110020G
Golubović AV, Veljkovic I, Šćepanović M, Grujić-Brojčin M, Tomic N, Mijin DŽ, Babić BM. Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants. in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2016;22(1):65-73.
doi:10.2298/CICEQ150110020G .
Golubović, Aleksandar V., Veljkovic, Ivana, Šćepanović, Maja, Grujić-Brojčin, Mirjana, Tomic, Natasa, Mijin, Dušan Ž., Babić, Biljana M., "Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 22, no. 1 (2016):65-73,
https://doi.org/10.2298/CICEQ150110020G . .
2
3
3

Substrate preheating and structural properties of power plasma sprayed hydroxyapatite coatings

Gligorijević, Bojan R.; Vilotijević, Miroljub N.; Šćepanović, Maja; Vuković, Nikola S.; Radović, Nenad A.

(Elsevier, 2016)

TY  - JOUR
AU  - Gligorijević, Bojan R.
AU  - Vilotijević, Miroljub N.
AU  - Šćepanović, Maja
AU  - Vuković, Nikola S.
AU  - Radović, Nenad A.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/825
AB  - The aim of the present study was to investigate the influence of substrate preheating on the structural properties of hydroxyapatite coatings (HACs) deposited by using the high power (52 kW) laminar plasma jet. The deposition experiments were performed within the 20-200 degrees C temperature range at different stand-off distances. The structural properties in the thickness direction and at the surface of the HACs were investigated by using the micro-Raman spectroscopy, scanning electron microscopy coupled with energy dispersive spectrometry, and X-ray powder diffractometry. The deposition without the preheating of the substrate produced HACs with crystallinity gradient in the thickness direction. At the stand-off distance of 80 mm, the preheating of the substrate at 200 degrees C practically eliminated the crystallinity gradient. At distances from the coating/substrate interface shorter than similar to 100 mu m, the increase of crystallinity with the preheating of the substrate was dominantly attributed to the recrystallization of hydroxyl-rich ACP into HA. At longer distances and higher initial substrate temperatures ( GT 100 degrees C), the crystallinity changes were negligible, whereas the recrystallization of hydroxyl-deficient ACP into oxyapatite (OA) was also possible. The X-ray diffractometry indicated the deposition conditions under which a minimum residual stress was achieved. The results of the present study strongly suggested the relation between the ACP - GT HA remystallization process and the bonding strength of the HACs. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
PB  - Elsevier
T2  - Ceramics International
T1  - Substrate preheating and structural properties of power plasma sprayed hydroxyapatite coatings
VL  - 42
IS  - 1
SP  - 411
EP  - 420
DO  - 10.1016/j.ceramint.2015.08.125
ER  - 
@article{
author = "Gligorijević, Bojan R. and Vilotijević, Miroljub N. and Šćepanović, Maja and Vuković, Nikola S. and Radović, Nenad A.",
year = "2016",
abstract = "The aim of the present study was to investigate the influence of substrate preheating on the structural properties of hydroxyapatite coatings (HACs) deposited by using the high power (52 kW) laminar plasma jet. The deposition experiments were performed within the 20-200 degrees C temperature range at different stand-off distances. The structural properties in the thickness direction and at the surface of the HACs were investigated by using the micro-Raman spectroscopy, scanning electron microscopy coupled with energy dispersive spectrometry, and X-ray powder diffractometry. The deposition without the preheating of the substrate produced HACs with crystallinity gradient in the thickness direction. At the stand-off distance of 80 mm, the preheating of the substrate at 200 degrees C practically eliminated the crystallinity gradient. At distances from the coating/substrate interface shorter than similar to 100 mu m, the increase of crystallinity with the preheating of the substrate was dominantly attributed to the recrystallization of hydroxyl-rich ACP into HA. At longer distances and higher initial substrate temperatures ( GT 100 degrees C), the crystallinity changes were negligible, whereas the recrystallization of hydroxyl-deficient ACP into oxyapatite (OA) was also possible. The X-ray diffractometry indicated the deposition conditions under which a minimum residual stress was achieved. The results of the present study strongly suggested the relation between the ACP - GT HA remystallization process and the bonding strength of the HACs. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Substrate preheating and structural properties of power plasma sprayed hydroxyapatite coatings",
volume = "42",
number = "1",
pages = "411-420",
doi = "10.1016/j.ceramint.2015.08.125"
}
Gligorijević, B. R., Vilotijević, M. N., Šćepanović, M., Vuković, N. S.,& Radović, N. A.. (2016). Substrate preheating and structural properties of power plasma sprayed hydroxyapatite coatings. in Ceramics International
Elsevier., 42(1), 411-420.
https://doi.org/10.1016/j.ceramint.2015.08.125
Gligorijević BR, Vilotijević MN, Šćepanović M, Vuković NS, Radović NA. Substrate preheating and structural properties of power plasma sprayed hydroxyapatite coatings. in Ceramics International. 2016;42(1):411-420.
doi:10.1016/j.ceramint.2015.08.125 .
Gligorijević, Bojan R., Vilotijević, Miroljub N., Šćepanović, Maja, Vuković, Nikola S., Radović, Nenad A., "Substrate preheating and structural properties of power plasma sprayed hydroxyapatite coatings" in Ceramics International, 42, no. 1 (2016):411-420,
https://doi.org/10.1016/j.ceramint.2015.08.125 . .
19
17
21

Surface structural heterogeneity of high power plasma-sprayed hydroxyapatite coatings

Gligorijević, Bojan R.; Vilotijević, Miroljub N.; Šćepanović, Maja; Vidovic, Dragoslav; Radović, Nenad A.

(2016)

TY  - JOUR
AU  - Gligorijević, Bojan R.
AU  - Vilotijević, Miroljub N.
AU  - Šćepanović, Maja
AU  - Vidovic, Dragoslav
AU  - Radović, Nenad A.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1245
AB  - The aim of this work was to examine the dependence of the local surface structure (surface structural heterogeneity) on the local thickness (thickness uniformity) and structure properties along the thickness of hydroxyapatite coatings (HACs) deposited by using the high power (52 kW) laminar plasma jet. For the deposition process, a relatively small size of the feedstock hydroxyapatite powder (HAP) (33 mu m) was used. The HACs were deposited at different stand-off distances (SODs) (80, 100, and 150 mm) without preheating of substrates. The thickness measurements were performed by using the calibrated micrometer and light microscopy (LM). The surface micro-structure was analyzed by using the micro-Raman spectroscopy (MRS), whereas the micro-structure along the thickness of HACs was studied by using the MRS, X-ray powder diffractometry (XRPD), and LM (combined with chemical etching). The results showed a heterogeneous phase distribution on the surface of each HAC analyzed as well as the non-uniform thickness of HACs. Apparently, a correlation existed between the local surface structure and the local thickness of HACs. However, the MRS, XRPD, and LM analyses of micro-structure along the thickness of HACs indicated that the differences in the local surface structure could be related to the different recrystallization established during the plasma deposition process in the different parts along the thickness of each HAC analyzed. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Journal of Alloys and Compounds
T1  - Surface structural heterogeneity of high power plasma-sprayed hydroxyapatite coatings
VL  - 687
SP  - 421
EP  - 430
DO  - 10.1016/j.jallcom.2016.06.163
ER  - 
@article{
author = "Gligorijević, Bojan R. and Vilotijević, Miroljub N. and Šćepanović, Maja and Vidovic, Dragoslav and Radović, Nenad A.",
year = "2016",
abstract = "The aim of this work was to examine the dependence of the local surface structure (surface structural heterogeneity) on the local thickness (thickness uniformity) and structure properties along the thickness of hydroxyapatite coatings (HACs) deposited by using the high power (52 kW) laminar plasma jet. For the deposition process, a relatively small size of the feedstock hydroxyapatite powder (HAP) (33 mu m) was used. The HACs were deposited at different stand-off distances (SODs) (80, 100, and 150 mm) without preheating of substrates. The thickness measurements were performed by using the calibrated micrometer and light microscopy (LM). The surface micro-structure was analyzed by using the micro-Raman spectroscopy (MRS), whereas the micro-structure along the thickness of HACs was studied by using the MRS, X-ray powder diffractometry (XRPD), and LM (combined with chemical etching). The results showed a heterogeneous phase distribution on the surface of each HAC analyzed as well as the non-uniform thickness of HACs. Apparently, a correlation existed between the local surface structure and the local thickness of HACs. However, the MRS, XRPD, and LM analyses of micro-structure along the thickness of HACs indicated that the differences in the local surface structure could be related to the different recrystallization established during the plasma deposition process in the different parts along the thickness of each HAC analyzed. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Journal of Alloys and Compounds",
title = "Surface structural heterogeneity of high power plasma-sprayed hydroxyapatite coatings",
volume = "687",
pages = "421-430",
doi = "10.1016/j.jallcom.2016.06.163"
}
Gligorijević, B. R., Vilotijević, M. N., Šćepanović, M., Vidovic, D.,& Radović, N. A.. (2016). Surface structural heterogeneity of high power plasma-sprayed hydroxyapatite coatings. in Journal of Alloys and Compounds, 687, 421-430.
https://doi.org/10.1016/j.jallcom.2016.06.163
Gligorijević BR, Vilotijević MN, Šćepanović M, Vidovic D, Radović NA. Surface structural heterogeneity of high power plasma-sprayed hydroxyapatite coatings. in Journal of Alloys and Compounds. 2016;687:421-430.
doi:10.1016/j.jallcom.2016.06.163 .
Gligorijević, Bojan R., Vilotijević, Miroljub N., Šćepanović, Maja, Vidovic, Dragoslav, Radović, Nenad A., "Surface structural heterogeneity of high power plasma-sprayed hydroxyapatite coatings" in Journal of Alloys and Compounds, 687 (2016):421-430,
https://doi.org/10.1016/j.jallcom.2016.06.163 . .
13
13
16

Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route

Tomić, Nataša; Grujić-Brojčin, Mirjana; Finčur, Nina L.; Abramović, Biljana F.; Simović, Bojana; Krstić, Jugoslav B.; Matović, Branko; Šćepanović, Maja

(Elsevier, 2015)

TY  - JOUR
AU  - Tomić, Nataša
AU  - Grujić-Brojčin, Mirjana
AU  - Finčur, Nina L.
AU  - Abramović, Biljana F.
AU  - Simović, Bojana
AU  - Krstić, Jugoslav B.
AU  - Matović, Branko
AU  - Šćepanović, Maja
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/821
AB  - Two series of nanocrystalline brookite-type powders have been synthesized by using combined sal gel hydrothermal method with titanium tetrachloride (TiCI4) as a precursor and hydrothermal temperature and reaction time varied in the range of 120-200 degrees C and 12-48 h, respectively. The effects of chosen synthesis parameters on structural, morphological and optical properties of synthesized powders have been investigated by the XRPD, SEM, EDS and BET measurements, as well Raman spectroscopy and spectroscopic ellipsometry. The XRPD results have shown that pure brookite phase, with mean crystallite size of -33 nm, has been obtained only in the sample synthesized at 200 degrees C, after 24 h of hydrothermal process. In all other samples anatase phase also appears, whereas rutile and sodium titanate phases have been noticed in the samples synthesized at lower temperatures. The presence of different titania phases has also been confirmed and analyzed by Raman scattering measurements. The SEM measurements have shown spindle-like particles in brookite-rich samples synthesized at 200 degrees C, whereas BET measurements have detected mesoporous structure in these samples. The properties of synthesized powders have been correlated to their photocatalytic efficiency, tested in degradation of alprazolam, one of the 5th generation benzodiazepines. The sample consisted of pure brookite has shown the highest efficiency in the photodegradation of alprazolam, practically equal to the activity of Degussa P25. (C) 2015 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route
VL  - 163
SP  - 518
EP  - 528
DO  - 10.1016/j.matchemphys.2015.08.008
ER  - 
@article{
author = "Tomić, Nataša and Grujić-Brojčin, Mirjana and Finčur, Nina L. and Abramović, Biljana F. and Simović, Bojana and Krstić, Jugoslav B. and Matović, Branko and Šćepanović, Maja",
year = "2015",
abstract = "Two series of nanocrystalline brookite-type powders have been synthesized by using combined sal gel hydrothermal method with titanium tetrachloride (TiCI4) as a precursor and hydrothermal temperature and reaction time varied in the range of 120-200 degrees C and 12-48 h, respectively. The effects of chosen synthesis parameters on structural, morphological and optical properties of synthesized powders have been investigated by the XRPD, SEM, EDS and BET measurements, as well Raman spectroscopy and spectroscopic ellipsometry. The XRPD results have shown that pure brookite phase, with mean crystallite size of -33 nm, has been obtained only in the sample synthesized at 200 degrees C, after 24 h of hydrothermal process. In all other samples anatase phase also appears, whereas rutile and sodium titanate phases have been noticed in the samples synthesized at lower temperatures. The presence of different titania phases has also been confirmed and analyzed by Raman scattering measurements. The SEM measurements have shown spindle-like particles in brookite-rich samples synthesized at 200 degrees C, whereas BET measurements have detected mesoporous structure in these samples. The properties of synthesized powders have been correlated to their photocatalytic efficiency, tested in degradation of alprazolam, one of the 5th generation benzodiazepines. The sample consisted of pure brookite has shown the highest efficiency in the photodegradation of alprazolam, practically equal to the activity of Degussa P25. (C) 2015 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route",
volume = "163",
pages = "518-528",
doi = "10.1016/j.matchemphys.2015.08.008"
}
Tomić, N., Grujić-Brojčin, M., Finčur, N. L., Abramović, B. F., Simović, B., Krstić, J. B., Matović, B.,& Šćepanović, M.. (2015). Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route. in Materials Chemistry and Physics
Elsevier., 163, 518-528.
https://doi.org/10.1016/j.matchemphys.2015.08.008
Tomić N, Grujić-Brojčin M, Finčur NL, Abramović BF, Simović B, Krstić JB, Matović B, Šćepanović M. Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route. in Materials Chemistry and Physics. 2015;163:518-528.
doi:10.1016/j.matchemphys.2015.08.008 .
Tomić, Nataša, Grujić-Brojčin, Mirjana, Finčur, Nina L., Abramović, Biljana F., Simović, Bojana, Krstić, Jugoslav B., Matović, Branko, Šćepanović, Maja, "Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route" in Materials Chemistry and Physics, 163 (2015):518-528,
https://doi.org/10.1016/j.matchemphys.2015.08.008 . .
29
30
30

Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties

Golubović, Aleksandar V.; Simović, Bojana; Šćepanović, Maja; Mijin, Dušan Ž.; Matkovic, A.; Grujić-Brojčin, Mirjana; Babić, Biljana M.

(2015)

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Simović, Bojana
AU  - Šćepanović, Maja
AU  - Mijin, Dušan Ž.
AU  - Matkovic, A.
AU  - Grujić-Brojčin, Mirjana
AU  - Babić, Biljana M.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/566
AB  - The titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor, varying the temperature of calcination (from 500 to 550 degrees C with the step of 10 degrees C). XRPD results have shown that all synthesized nanopowders are dominantly in anatase phase. The analysis of the shift and linewidth of the most intensive anatase E-g Raman mode confirmed the XRPD results and added the presence of small amount of highly disordered brookite phase in all samples. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 1.5 and 4.5 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16). The sample calcined at temperature of 510 degrees C showed the best photocatalytic performance.
T2  - Science of Sintering
T1  - Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties
VL  - 47
IS  - 1
SP  - 41
EP  - 49
DO  - 10.2298/SOS1501041G
ER  - 
@article{
author = "Golubović, Aleksandar V. and Simović, Bojana and Šćepanović, Maja and Mijin, Dušan Ž. and Matkovic, A. and Grujić-Brojčin, Mirjana and Babić, Biljana M.",
year = "2015",
abstract = "The titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor, varying the temperature of calcination (from 500 to 550 degrees C with the step of 10 degrees C). XRPD results have shown that all synthesized nanopowders are dominantly in anatase phase. The analysis of the shift and linewidth of the most intensive anatase E-g Raman mode confirmed the XRPD results and added the presence of small amount of highly disordered brookite phase in all samples. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 1.5 and 4.5 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16). The sample calcined at temperature of 510 degrees C showed the best photocatalytic performance.",
journal = "Science of Sintering",
title = "Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties",
volume = "47",
number = "1",
pages = "41-49",
doi = "10.2298/SOS1501041G"
}
Golubović, A. V., Simović, B., Šćepanović, M., Mijin, D. Ž., Matkovic, A., Grujić-Brojčin, M.,& Babić, B. M.. (2015). Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties. in Science of Sintering, 47(1), 41-49.
https://doi.org/10.2298/SOS1501041G
Golubović AV, Simović B, Šćepanović M, Mijin DŽ, Matkovic A, Grujić-Brojčin M, Babić BM. Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties. in Science of Sintering. 2015;47(1):41-49.
doi:10.2298/SOS1501041G .
Golubović, Aleksandar V., Simović, Bojana, Šćepanović, Maja, Mijin, Dušan Ž., Matkovic, A., Grujić-Brojčin, Mirjana, Babić, Biljana M., "Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties" in Science of Sintering, 47, no. 1 (2015):41-49,
https://doi.org/10.2298/SOS1501041G . .
1
3
3

Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam

Golubović, Aleksandar V.; Tomić, Nataša; Finčur, Nina L.; Abramović, Biljana F.; Veljkovic, I.; Zdravkovic, J.; Grujić-Brojčin, Mirjana; Babić, Biljana M.; Stojadinovic, B.; Šćepanović, Maja

(2014)

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Tomić, Nataša
AU  - Finčur, Nina L.
AU  - Abramović, Biljana F.
AU  - Veljkovic, I.
AU  - Zdravkovic, J.
AU  - Grujić-Brojčin, Mirjana
AU  - Babić, Biljana M.
AU  - Stojadinovic, B.
AU  - Šćepanović, Maja
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/127
AB  - Pure and La3+ doped titanium dioxide (TiO2) nanopowders were obtained by sol gel and hydrothermal methods. A precursor was titanium tetrachloride and concentrations of dopants were 0.5 and 1.0 mol%. Procedures of both methods were the same, up to the last part of synthesis (the transformation from the mother liquor to oxide nanopowders), in order to find the influence of applied methods on the properties of nanopowders. XRD results have shown that all synthesized nanopowders were in the anatase phase. It was seen from DSC measurements that anatase to rutile phase transition took place at a higher temperature with a higher concentration of dopant (La3+). The samples obtained by the sol gel method had a higher temperature of phase transition than related samples obtained by the hydrothermal method. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the pharmaceutical alprazolam. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam
VL  - 40
IS  - 8
SP  - 13409
EP  - 13418
DO  - 10.1016/j.ceramint.2014.05.060
ER  - 
@article{
author = "Golubović, Aleksandar V. and Tomić, Nataša and Finčur, Nina L. and Abramović, Biljana F. and Veljkovic, I. and Zdravkovic, J. and Grujić-Brojčin, Mirjana and Babić, Biljana M. and Stojadinovic, B. and Šćepanović, Maja",
year = "2014",
abstract = "Pure and La3+ doped titanium dioxide (TiO2) nanopowders were obtained by sol gel and hydrothermal methods. A precursor was titanium tetrachloride and concentrations of dopants were 0.5 and 1.0 mol%. Procedures of both methods were the same, up to the last part of synthesis (the transformation from the mother liquor to oxide nanopowders), in order to find the influence of applied methods on the properties of nanopowders. XRD results have shown that all synthesized nanopowders were in the anatase phase. It was seen from DSC measurements that anatase to rutile phase transition took place at a higher temperature with a higher concentration of dopant (La3+). The samples obtained by the sol gel method had a higher temperature of phase transition than related samples obtained by the hydrothermal method. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the pharmaceutical alprazolam. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam",
volume = "40",
number = "8",
pages = "13409-13418",
doi = "10.1016/j.ceramint.2014.05.060"
}
Golubović, A. V., Tomić, N., Finčur, N. L., Abramović, B. F., Veljkovic, I., Zdravkovic, J., Grujić-Brojčin, M., Babić, B. M., Stojadinovic, B.,& Šćepanović, M.. (2014). Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam. in Ceramics International, 40(8), 13409-13418.
https://doi.org/10.1016/j.ceramint.2014.05.060
Golubović AV, Tomić N, Finčur NL, Abramović BF, Veljkovic I, Zdravkovic J, Grujić-Brojčin M, Babić BM, Stojadinovic B, Šćepanović M. Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam. in Ceramics International. 2014;40(8):13409-13418.
doi:10.1016/j.ceramint.2014.05.060 .
Golubović, Aleksandar V., Tomić, Nataša, Finčur, Nina L., Abramović, Biljana F., Veljkovic, I., Zdravkovic, J., Grujić-Brojčin, Mirjana, Babić, Biljana M., Stojadinovic, B., Šćepanović, Maja, "Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam" in Ceramics International, 40, no. 8 (2014):13409-13418,
https://doi.org/10.1016/j.ceramint.2014.05.060 . .
9
9
9

Raman Responses in Mechanically Activated BaTiO3

Pavlović, Vera P.; Nikolic, Maria V.; Pavlović, Vladimir B.; Blanuša, Jovan; Stevanović, Suzana; Mitić, Vojislav V.; Šćepanović, Maja; Vlahović, Branislav

(2014)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Nikolic, Maria V.
AU  - Pavlović, Vladimir B.
AU  - Blanuša, Jovan
AU  - Stevanović, Suzana
AU  - Mitić, Vojislav V.
AU  - Šćepanović, Maja
AU  - Vlahović, Branislav
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5863
AB  - The structure and lattice dynamics of mechanically activated BaTiO3 was investigated in this study. Phonon behavior and crystal structure stability of the obtained nanocrystalline BaTiO3 were discussed from the view point of crystallite size effects and microstrains induced by mechanical activation. A systematic study of Raman responses indicates that mechanical activation has a distinct influence on BaTiO3 lattice spectra affecting the intensity, width, and position of Raman modes. The measured Raman spectra were deconvoluted and phonon parameters were estimated. It has been established that applied mechanical activation leads to a significant decrease in the mean crystallites size, but nevertheless enables formation of tetragonal nanocrystalline BaTiO3.
T2  - Journal of the American Ceramic Society
T1  - Raman Responses in Mechanically Activated BaTiO3
VL  - 97
IS  - 2
SP  - 601
EP  - 608
DO  - 10.1111/jace.12423
ER  - 
@article{
author = "Pavlović, Vera P. and Nikolic, Maria V. and Pavlović, Vladimir B. and Blanuša, Jovan and Stevanović, Suzana and Mitić, Vojislav V. and Šćepanović, Maja and Vlahović, Branislav",
year = "2014",
abstract = "The structure and lattice dynamics of mechanically activated BaTiO3 was investigated in this study. Phonon behavior and crystal structure stability of the obtained nanocrystalline BaTiO3 were discussed from the view point of crystallite size effects and microstrains induced by mechanical activation. A systematic study of Raman responses indicates that mechanical activation has a distinct influence on BaTiO3 lattice spectra affecting the intensity, width, and position of Raman modes. The measured Raman spectra were deconvoluted and phonon parameters were estimated. It has been established that applied mechanical activation leads to a significant decrease in the mean crystallites size, but nevertheless enables formation of tetragonal nanocrystalline BaTiO3.",
journal = "Journal of the American Ceramic Society",
title = "Raman Responses in Mechanically Activated BaTiO3",
volume = "97",
number = "2",
pages = "601-608",
doi = "10.1111/jace.12423"
}
Pavlović, V. P., Nikolic, M. V., Pavlović, V. B., Blanuša, J., Stevanović, S., Mitić, V. V., Šćepanović, M.,& Vlahović, B.. (2014). Raman Responses in Mechanically Activated BaTiO3. in Journal of the American Ceramic Society, 97(2), 601-608.
https://doi.org/10.1111/jace.12423
Pavlović VP, Nikolic MV, Pavlović VB, Blanuša J, Stevanović S, Mitić VV, Šćepanović M, Vlahović B. Raman Responses in Mechanically Activated BaTiO3. in Journal of the American Ceramic Society. 2014;97(2):601-608.
doi:10.1111/jace.12423 .
Pavlović, Vera P., Nikolic, Maria V., Pavlović, Vladimir B., Blanuša, Jovan, Stevanović, Suzana, Mitić, Vojislav V., Šćepanović, Maja, Vlahović, Branislav, "Raman Responses in Mechanically Activated BaTiO3" in Journal of the American Ceramic Society, 97, no. 2 (2014):601-608,
https://doi.org/10.1111/jace.12423 . .
13
13
15

Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping

Grujić-Brojčin, Mirjana; Armaković, Sanja J.; Tomić, Nataša; Abramović, Biljana F.; Golubavic, A.; Stojadinovic, B.; Kremenović, Aleksandar S.; Babić, Biljana M.; Dohcevic-Mitrovic, Z.; Šćepanović, Maja

(2014)

TY  - JOUR
AU  - Grujić-Brojčin, Mirjana
AU  - Armaković, Sanja J.
AU  - Tomić, Nataša
AU  - Abramović, Biljana F.
AU  - Golubavic, A.
AU  - Stojadinovic, B.
AU  - Kremenović, Aleksandar S.
AU  - Babić, Biljana M.
AU  - Dohcevic-Mitrovic, Z.
AU  - Šćepanović, Maja
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5881
AB  - The influence of La-doping in the range of 0.5-6.0 mol% on structural and morphological properties of TiO2 nanopowders synthesized by sol-gel routine has been investigated by XRPD, AFM, EDS and BET measurements, as well as Raman spectroscopy. The XRPD and Raman measurements have revealed the anatase phase as dominant in all nanopowders, with crystallite size decreasing from similar to 15 nm in pure TiO2 to similar to 12 nm in La-doped samples. The BET data suggest that all samples are fully mesoporous, with mean pore diameters in the range of similar to 6-8 nm. The specific surface area and the complexity of pore structure are greater in doped samples than in pure TiO2 sample. The spectroscopic ellipsometry has apparently shown that the band gap has been gradually increased with the increase of La content. The STM and STS techniques have been used successfully to evaluate the surface morphology and electronic properties of La-doped nanopowders. All investigated properties have been related to photocatalytic activity, tested in degradation of a metoprolol tartrate salt (0.05 mM), and induced by UV-radiation. All doped samples showed increased photocatalytic activity compared to pure TiO2, among which the 0.65 mol% La-doped sample appeared to be the most efficient. (C) 2013 Elsevier Inc. All rights reserved.
T2  - Materials Characterization
T1  - Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping
VL  - 88
SP  - 30
EP  - 41
DO  - 10.1016/j.matchar.2013.12.002
ER  - 
@article{
author = "Grujić-Brojčin, Mirjana and Armaković, Sanja J. and Tomić, Nataša and Abramović, Biljana F. and Golubavic, A. and Stojadinovic, B. and Kremenović, Aleksandar S. and Babić, Biljana M. and Dohcevic-Mitrovic, Z. and Šćepanović, Maja",
year = "2014",
abstract = "The influence of La-doping in the range of 0.5-6.0 mol% on structural and morphological properties of TiO2 nanopowders synthesized by sol-gel routine has been investigated by XRPD, AFM, EDS and BET measurements, as well as Raman spectroscopy. The XRPD and Raman measurements have revealed the anatase phase as dominant in all nanopowders, with crystallite size decreasing from similar to 15 nm in pure TiO2 to similar to 12 nm in La-doped samples. The BET data suggest that all samples are fully mesoporous, with mean pore diameters in the range of similar to 6-8 nm. The specific surface area and the complexity of pore structure are greater in doped samples than in pure TiO2 sample. The spectroscopic ellipsometry has apparently shown that the band gap has been gradually increased with the increase of La content. The STM and STS techniques have been used successfully to evaluate the surface morphology and electronic properties of La-doped nanopowders. All investigated properties have been related to photocatalytic activity, tested in degradation of a metoprolol tartrate salt (0.05 mM), and induced by UV-radiation. All doped samples showed increased photocatalytic activity compared to pure TiO2, among which the 0.65 mol% La-doped sample appeared to be the most efficient. (C) 2013 Elsevier Inc. All rights reserved.",
journal = "Materials Characterization",
title = "Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping",
volume = "88",
pages = "30-41",
doi = "10.1016/j.matchar.2013.12.002"
}
Grujić-Brojčin, M., Armaković, S. J., Tomić, N., Abramović, B. F., Golubavic, A., Stojadinovic, B., Kremenović, A. S., Babić, B. M., Dohcevic-Mitrovic, Z.,& Šćepanović, M.. (2014). Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping. in Materials Characterization, 88, 30-41.
https://doi.org/10.1016/j.matchar.2013.12.002
Grujić-Brojčin M, Armaković SJ, Tomić N, Abramović BF, Golubavic A, Stojadinovic B, Kremenović AS, Babić BM, Dohcevic-Mitrovic Z, Šćepanović M. Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping. in Materials Characterization. 2014;88:30-41.
doi:10.1016/j.matchar.2013.12.002 .
Grujić-Brojčin, Mirjana, Armaković, Sanja J., Tomić, Nataša, Abramović, Biljana F., Golubavic, A., Stojadinovic, B., Kremenović, Aleksandar S., Babić, Biljana M., Dohcevic-Mitrovic, Z., Šćepanović, Maja, "Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping" in Materials Characterization, 88 (2014):30-41,
https://doi.org/10.1016/j.matchar.2013.12.002 . .
39
34
39

Improved efficiency of sol-gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol

Golubović, Aleksandar V.; Abramović, Biljana F.; Šćepanović, Maja; Grujić-Brojčin, Mirjana; Armaković, Sanja J.; Veljkovic, I.; Babić, Biljana M.; Dohcevic-Mitrovic, Z.; Popović, Zoran V.

(2013)

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Abramović, Biljana F.
AU  - Šćepanović, Maja
AU  - Grujić-Brojčin, Mirjana
AU  - Armaković, Sanja J.
AU  - Veljkovic, I.
AU  - Babić, Biljana M.
AU  - Dohcevic-Mitrovic, Z.
AU  - Popović, Zoran V.
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5421
AB  - The structural and morphological properties of mesoporous anatase nanopowders, synthesized by sol-gel method, have been modified by varying the duration of calcination, in order to obtain more efficient photocatalyst than Degussa P25 in the degradation of relatively large pollutant molecules ( GT 1 nm in size). According to X-ray diffraction analysis, the crystallite size was increased from 13 to 17.5 nm with the increase of calcination time from 1 to 7 h. The analysis of nitrogen sorption experimental data revealed that all samples were mesoporous, with a mean pore diameters in the range of similar to 5-9 nm. The corrugated pore structure model was employed to evaluate pore structure tortuosity. Nanopowder properties have been related to the photocatalytic activity, tested in the degradation of metoprolol tartrate salt, selective beta(1)-blocker used in a variety of cardiovascular diseases, with molecular size of 0.610 nm x 1.347 nm. The study has demonstrated that samples calcined for 4 and 5 h have displayed higher photocatalytic performance than Degussa P25, whereas the sample calcined for 3 h has shown comparable activity. (C) 2013 Published by Elsevier Ltd.
T2  - Materials Research Bulletin
T1  - Improved efficiency of sol-gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol
VL  - 48
IS  - 4
SP  - 1363
EP  - 1371
DO  - 10.1016/j.materresbull.2012.11.098
ER  - 
@article{
author = "Golubović, Aleksandar V. and Abramović, Biljana F. and Šćepanović, Maja and Grujić-Brojčin, Mirjana and Armaković, Sanja J. and Veljkovic, I. and Babić, Biljana M. and Dohcevic-Mitrovic, Z. and Popović, Zoran V.",
year = "2013",
abstract = "The structural and morphological properties of mesoporous anatase nanopowders, synthesized by sol-gel method, have been modified by varying the duration of calcination, in order to obtain more efficient photocatalyst than Degussa P25 in the degradation of relatively large pollutant molecules ( GT 1 nm in size). According to X-ray diffraction analysis, the crystallite size was increased from 13 to 17.5 nm with the increase of calcination time from 1 to 7 h. The analysis of nitrogen sorption experimental data revealed that all samples were mesoporous, with a mean pore diameters in the range of similar to 5-9 nm. The corrugated pore structure model was employed to evaluate pore structure tortuosity. Nanopowder properties have been related to the photocatalytic activity, tested in the degradation of metoprolol tartrate salt, selective beta(1)-blocker used in a variety of cardiovascular diseases, with molecular size of 0.610 nm x 1.347 nm. The study has demonstrated that samples calcined for 4 and 5 h have displayed higher photocatalytic performance than Degussa P25, whereas the sample calcined for 3 h has shown comparable activity. (C) 2013 Published by Elsevier Ltd.",
journal = "Materials Research Bulletin",
title = "Improved efficiency of sol-gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol",
volume = "48",
number = "4",
pages = "1363-1371",
doi = "10.1016/j.materresbull.2012.11.098"
}
Golubović, A. V., Abramović, B. F., Šćepanović, M., Grujić-Brojčin, M., Armaković, S. J., Veljkovic, I., Babić, B. M., Dohcevic-Mitrovic, Z.,& Popović, Z. V.. (2013). Improved efficiency of sol-gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol. in Materials Research Bulletin, 48(4), 1363-1371.
https://doi.org/10.1016/j.materresbull.2012.11.098
Golubović AV, Abramović BF, Šćepanović M, Grujić-Brojčin M, Armaković SJ, Veljkovic I, Babić BM, Dohcevic-Mitrovic Z, Popović ZV. Improved efficiency of sol-gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol. in Materials Research Bulletin. 2013;48(4):1363-1371.
doi:10.1016/j.materresbull.2012.11.098 .
Golubović, Aleksandar V., Abramović, Biljana F., Šćepanović, Maja, Grujić-Brojčin, Mirjana, Armaković, Sanja J., Veljkovic, I., Babić, Biljana M., Dohcevic-Mitrovic, Z., Popović, Zoran V., "Improved efficiency of sol-gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol" in Materials Research Bulletin, 48, no. 4 (2013):1363-1371,
https://doi.org/10.1016/j.materresbull.2012.11.098 . .
28
26
29

Photocatalytic degradation of metoprolol in water suspension of TiO2 nanopowders prepared using sol-gel route

Šćepanović, Maja; Abramović, Biljana F.; Golubović, Aleksandar V.; Kler, Sanja; Grujić-Brojčin, Mirjana; Dohčević-Mitrović, Zorana ; Babić, Biljana M.; Matović, Branko; Popović, Zoran V.

(2012)

TY  - JOUR
AU  - Šćepanović, Maja
AU  - Abramović, Biljana F.
AU  - Golubović, Aleksandar V.
AU  - Kler, Sanja
AU  - Grujić-Brojčin, Mirjana
AU  - Dohčević-Mitrović, Zorana 
AU  - Babić, Biljana M.
AU  - Matović, Branko
AU  - Popović, Zoran V.
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4656
AB  - Nanocrystalline titanium dioxide (TiO2) powders have been synthesized by sol-gel method using titanium tetrachloride (TiCl4) or tetrabutyl titanate (Ti(OC4H9)(4) as precursors, different alcohols and calcination temperatures in the range from 400 to 650 A degrees C. The photocatalytic activity of as-prepared powders has been tested for the degradation of metoprolol tartrate salt, a selective beta-blocker used to treat a variety of cardiovascular diseases, and compared to photocatalytic activity obtained from Degussa P25. Nanosized TiO2 powders prepared from TiCl4 and amyl-alcohol, calcined at 550 A degrees C, displayed an activity comparable to Degussa P25, whereas the sample from the same series, calcined at 650 A degrees C, showed higher photocatalytic activity in the whole range of the catalyst loading. Structural, morphological and surface properties of synthesized TiO2 nanopowders have been investigated by XRD, SEM, EDS and BET measurements, as well as FTIR and Raman spectroscopy, in order to find out the material properties which enable rapid an efficient decomposition of metoprolol under UV radiation.
T2  - Journal of Sol-gel Science and Technology
T1  - Photocatalytic degradation of metoprolol in water suspension of TiO2 nanopowders prepared using sol-gel route
VL  - 61
IS  - 2
SP  - 390
EP  - 402
DO  - 10.1007/s10971-011-2639-9
ER  - 
@article{
author = "Šćepanović, Maja and Abramović, Biljana F. and Golubović, Aleksandar V. and Kler, Sanja and Grujić-Brojčin, Mirjana and Dohčević-Mitrović, Zorana  and Babić, Biljana M. and Matović, Branko and Popović, Zoran V.",
year = "2012",
abstract = "Nanocrystalline titanium dioxide (TiO2) powders have been synthesized by sol-gel method using titanium tetrachloride (TiCl4) or tetrabutyl titanate (Ti(OC4H9)(4) as precursors, different alcohols and calcination temperatures in the range from 400 to 650 A degrees C. The photocatalytic activity of as-prepared powders has been tested for the degradation of metoprolol tartrate salt, a selective beta-blocker used to treat a variety of cardiovascular diseases, and compared to photocatalytic activity obtained from Degussa P25. Nanosized TiO2 powders prepared from TiCl4 and amyl-alcohol, calcined at 550 A degrees C, displayed an activity comparable to Degussa P25, whereas the sample from the same series, calcined at 650 A degrees C, showed higher photocatalytic activity in the whole range of the catalyst loading. Structural, morphological and surface properties of synthesized TiO2 nanopowders have been investigated by XRD, SEM, EDS and BET measurements, as well as FTIR and Raman spectroscopy, in order to find out the material properties which enable rapid an efficient decomposition of metoprolol under UV radiation.",
journal = "Journal of Sol-gel Science and Technology",
title = "Photocatalytic degradation of metoprolol in water suspension of TiO2 nanopowders prepared using sol-gel route",
volume = "61",
number = "2",
pages = "390-402",
doi = "10.1007/s10971-011-2639-9"
}
Šćepanović, M., Abramović, B. F., Golubović, A. V., Kler, S., Grujić-Brojčin, M., Dohčević-Mitrović, Z., Babić, B. M., Matović, B.,& Popović, Z. V.. (2012). Photocatalytic degradation of metoprolol in water suspension of TiO2 nanopowders prepared using sol-gel route. in Journal of Sol-gel Science and Technology, 61(2), 390-402.
https://doi.org/10.1007/s10971-011-2639-9
Šćepanović M, Abramović BF, Golubović AV, Kler S, Grujić-Brojčin M, Dohčević-Mitrović Z, Babić BM, Matović B, Popović ZV. Photocatalytic degradation of metoprolol in water suspension of TiO2 nanopowders prepared using sol-gel route. in Journal of Sol-gel Science and Technology. 2012;61(2):390-402.
doi:10.1007/s10971-011-2639-9 .
Šćepanović, Maja, Abramović, Biljana F., Golubović, Aleksandar V., Kler, Sanja, Grujić-Brojčin, Mirjana, Dohčević-Mitrović, Zorana , Babić, Biljana M., Matović, Branko, Popović, Zoran V., "Photocatalytic degradation of metoprolol in water suspension of TiO2 nanopowders prepared using sol-gel route" in Journal of Sol-gel Science and Technology, 61, no. 2 (2012):390-402,
https://doi.org/10.1007/s10971-011-2639-9 . .
31
33
33

Structural investigation of mechanically activated nanocrystalline BaTiO3 powders

Pavlović, Vera P.; Krstić, Jugoslav B.; Šćepanović, Maja; Dojčilović, Jablan R.; Minić, Dragica M.; Blanuša, Jovan; Stevanović, Stojan; Mitić, Vojislav V.; Pavlović, Vladimir B.

(Elsevier, 2011)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav B.
AU  - Šćepanović, Maja
AU  - Dojčilović, Jablan R.
AU  - Minić, Dragica M.
AU  - Blanuša, Jovan
AU  - Stevanović, Stojan
AU  - Mitić, Vojislav V.
AU  - Pavlović, Vladimir B.
PY  - 2011
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4449
AB  - In this article, in order to obtain tetragonal nanocrystalline BaTiO3, structural investigations of mechanically activated BaTiO3 powder have been performed. A mercury porosimetry analysis and scanning electron microscopy method have been applied for determination of the specific pore volume, porosity and microstructure morphology of the samples. The lattice vibration spectra of nonactivated and activated powders, their phase composition, lattice microstrains and the mean size of coherently diffracting domains were examined by Raman spectroscopy and the X-ray powder diffraction method. The average crystal structure of obtained nanocrystalline powders, estimated from X-ray diffraction data, gave evidence of retained, but slightly sustained tetragonality of powders, even for particles as small as similar to 30 nm. Raman spectroscopy also gave clear evidence for local tetragonal symmetries, in particular through the presence of a band at similar to 307 cm(-1). (C) 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
PB  - Elsevier
T2  - Ceramics International
T1  - Structural investigation of mechanically activated nanocrystalline BaTiO3 powders
VL  - 37
IS  - 7
SP  - 2513
EP  - 2518
DO  - 10.1016/j.ceramint.2011.03.064
ER  - 
@article{
author = "Pavlović, Vera P. and Krstić, Jugoslav B. and Šćepanović, Maja and Dojčilović, Jablan R. and Minić, Dragica M. and Blanuša, Jovan and Stevanović, Stojan and Mitić, Vojislav V. and Pavlović, Vladimir B.",
year = "2011",
abstract = "In this article, in order to obtain tetragonal nanocrystalline BaTiO3, structural investigations of mechanically activated BaTiO3 powder have been performed. A mercury porosimetry analysis and scanning electron microscopy method have been applied for determination of the specific pore volume, porosity and microstructure morphology of the samples. The lattice vibration spectra of nonactivated and activated powders, their phase composition, lattice microstrains and the mean size of coherently diffracting domains were examined by Raman spectroscopy and the X-ray powder diffraction method. The average crystal structure of obtained nanocrystalline powders, estimated from X-ray diffraction data, gave evidence of retained, but slightly sustained tetragonality of powders, even for particles as small as similar to 30 nm. Raman spectroscopy also gave clear evidence for local tetragonal symmetries, in particular through the presence of a band at similar to 307 cm(-1). (C) 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Structural investigation of mechanically activated nanocrystalline BaTiO3 powders",
volume = "37",
number = "7",
pages = "2513-2518",
doi = "10.1016/j.ceramint.2011.03.064"
}
Pavlović, V. P., Krstić, J. B., Šćepanović, M., Dojčilović, J. R., Minić, D. M., Blanuša, J., Stevanović, S., Mitić, V. V.,& Pavlović, V. B.. (2011). Structural investigation of mechanically activated nanocrystalline BaTiO3 powders. in Ceramics International
Elsevier., 37(7), 2513-2518.
https://doi.org/10.1016/j.ceramint.2011.03.064
Pavlović VP, Krstić JB, Šćepanović M, Dojčilović JR, Minić DM, Blanuša J, Stevanović S, Mitić VV, Pavlović VB. Structural investigation of mechanically activated nanocrystalline BaTiO3 powders. in Ceramics International. 2011;37(7):2513-2518.
doi:10.1016/j.ceramint.2011.03.064 .
Pavlović, Vera P., Krstić, Jugoslav B., Šćepanović, Maja, Dojčilović, Jablan R., Minić, Dragica M., Blanuša, Jovan, Stevanović, Stojan, Mitić, Vojislav V., Pavlović, Vladimir B., "Structural investigation of mechanically activated nanocrystalline BaTiO3 powders" in Ceramics International, 37, no. 7 (2011):2513-2518,
https://doi.org/10.1016/j.ceramint.2011.03.064 . .
12
16
15

Mesoporous CeO2 nanopowders with different particle sizes

Dohcevic-Mitrovic, Z.; Golubović, Aleksandar V.; Radović, Marko B.; Fruth, V.; Kremenović, Aleksandar S.; Meden, A.; Babić, Biljana M.; Šćepanović, Maja; Popović, Zoran V.

(2011)

TY  - JOUR
AU  - Dohcevic-Mitrovic, Z.
AU  - Golubović, Aleksandar V.
AU  - Radović, Marko B.
AU  - Fruth, V.
AU  - Kremenović, Aleksandar S.
AU  - Meden, A.
AU  - Babić, Biljana M.
AU  - Šćepanović, Maja
AU  - Popović, Zoran V.
PY  - 2011
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4421
AB  - Ultrafine porous cerium dioxide nanopowders were synthesized by relatively new and cost-effective hydrothermal method varying the main synthesis parameters, temperature of calcination and type of basic solution. Characterization of the as-produced powders was performed by X-ray diffraction (XRD), atomic force microscopy (AFM), Raman scattering and Brunauer-Emmett-Teller (BET) method. This study reveals that difference in synthesis parameters has strong influence on the particle size, surface area, and pore size distribution enabling the more precise control of material properties very important for catalytic and nanosensor applications. (C) 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim
T2  - Physica Status Solidi. A: Applications and Materials Science
T1  - Mesoporous CeO2 nanopowders with different particle sizes
VL  - 208
IS  - 6
SP  - 1399
EP  - 1402
DO  - 10.1002/pssa.201000355
ER  - 
@article{
author = "Dohcevic-Mitrovic, Z. and Golubović, Aleksandar V. and Radović, Marko B. and Fruth, V. and Kremenović, Aleksandar S. and Meden, A. and Babić, Biljana M. and Šćepanović, Maja and Popović, Zoran V.",
year = "2011",
abstract = "Ultrafine porous cerium dioxide nanopowders were synthesized by relatively new and cost-effective hydrothermal method varying the main synthesis parameters, temperature of calcination and type of basic solution. Characterization of the as-produced powders was performed by X-ray diffraction (XRD), atomic force microscopy (AFM), Raman scattering and Brunauer-Emmett-Teller (BET) method. This study reveals that difference in synthesis parameters has strong influence on the particle size, surface area, and pore size distribution enabling the more precise control of material properties very important for catalytic and nanosensor applications. (C) 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim",
journal = "Physica Status Solidi. A: Applications and Materials Science",
title = "Mesoporous CeO2 nanopowders with different particle sizes",
volume = "208",
number = "6",
pages = "1399-1402",
doi = "10.1002/pssa.201000355"
}
Dohcevic-Mitrovic, Z., Golubović, A. V., Radović, M. B., Fruth, V., Kremenović, A. S., Meden, A., Babić, B. M., Šćepanović, M.,& Popović, Z. V.. (2011). Mesoporous CeO2 nanopowders with different particle sizes. in Physica Status Solidi. A: Applications and Materials Science, 208(6), 1399-1402.
https://doi.org/10.1002/pssa.201000355
Dohcevic-Mitrovic Z, Golubović AV, Radović MB, Fruth V, Kremenović AS, Meden A, Babić BM, Šćepanović M, Popović ZV. Mesoporous CeO2 nanopowders with different particle sizes. in Physica Status Solidi. A: Applications and Materials Science. 2011;208(6):1399-1402.
doi:10.1002/pssa.201000355 .
Dohcevic-Mitrovic, Z., Golubović, Aleksandar V., Radović, Marko B., Fruth, V., Kremenović, Aleksandar S., Meden, A., Babić, Biljana M., Šćepanović, Maja, Popović, Zoran V., "Mesoporous CeO2 nanopowders with different particle sizes" in Physica Status Solidi. A: Applications and Materials Science, 208, no. 6 (2011):1399-1402,
https://doi.org/10.1002/pssa.201000355 . .
2
2
2

Raman Study of Vanadium-Doped Titania Nanopowders Synthesized By Sol-Gel Method

Šćepanović, Maja; Askrabic, S.; Grujić-Brojčin, Mirjana; Golubović, Aleksandar V.; Dohcevic-Mitrovic, Z.; Matović, Branko; Popović, Zoran V.

(2010)

TY  - JOUR
AU  - Šćepanović, Maja
AU  - Askrabic, S.
AU  - Grujić-Brojčin, Mirjana
AU  - Golubović, Aleksandar V.
AU  - Dohcevic-Mitrovic, Z.
AU  - Matović, Branko
AU  - Popović, Zoran V.
PY  - 2010
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6863
AB  - Pure titania (TiO(2)) nanopowders and TiO(2) doped with 10 mol % of vanadium ions (V(3+)) are synthesized by sol-gel method. The dependence of structural characteristics of nanopowders on synthesis conditions is investigated by X-ray diffraction and Raman spectroscopy. Very intensive modes observed in Raman spectra of all nanopowders are assigned to anatase phase of TiO(2). Additional Raman modes of extremely low intensity which can be related to the presence of small
T2  - International Journal of Modern Physics B
T1  - Raman Study of Vanadium-Doped Titania Nanopowders Synthesized By Sol-Gel Method
VL  - 24
IS  - 6-7
SP  - 667
EP  - 675
DO  - 10.1142/S0217979210064289
ER  - 
@article{
author = "Šćepanović, Maja and Askrabic, S. and Grujić-Brojčin, Mirjana and Golubović, Aleksandar V. and Dohcevic-Mitrovic, Z. and Matović, Branko and Popović, Zoran V.",
year = "2010",
abstract = "Pure titania (TiO(2)) nanopowders and TiO(2) doped with 10 mol % of vanadium ions (V(3+)) are synthesized by sol-gel method. The dependence of structural characteristics of nanopowders on synthesis conditions is investigated by X-ray diffraction and Raman spectroscopy. Very intensive modes observed in Raman spectra of all nanopowders are assigned to anatase phase of TiO(2). Additional Raman modes of extremely low intensity which can be related to the presence of small",
journal = "International Journal of Modern Physics B",
title = "Raman Study of Vanadium-Doped Titania Nanopowders Synthesized By Sol-Gel Method",
volume = "24",
number = "6-7",
pages = "667-675",
doi = "10.1142/S0217979210064289"
}
Šćepanović, M., Askrabic, S., Grujić-Brojčin, M., Golubović, A. V., Dohcevic-Mitrovic, Z., Matović, B.,& Popović, Z. V.. (2010). Raman Study of Vanadium-Doped Titania Nanopowders Synthesized By Sol-Gel Method. in International Journal of Modern Physics B, 24(6-7), 667-675.
https://doi.org/10.1142/S0217979210064289
Šćepanović M, Askrabic S, Grujić-Brojčin M, Golubović AV, Dohcevic-Mitrovic Z, Matović B, Popović ZV. Raman Study of Vanadium-Doped Titania Nanopowders Synthesized By Sol-Gel Method. in International Journal of Modern Physics B. 2010;24(6-7):667-675.
doi:10.1142/S0217979210064289 .
Šćepanović, Maja, Askrabic, S., Grujić-Brojčin, Mirjana, Golubović, Aleksandar V., Dohcevic-Mitrovic, Z., Matović, Branko, Popović, Zoran V., "Raman Study of Vanadium-Doped Titania Nanopowders Synthesized By Sol-Gel Method" in International Journal of Modern Physics B, 24, no. 6-7 (2010):667-675,
https://doi.org/10.1142/S0217979210064289 . .
2
1
1

Hydrothermal Synthesis of CeO2 and Ce0.9Fe0.1O2 Nanocrystals

Radović, Marko B.; Dohcevic-Mitrovic, Z. D.; Golubović, Aleksandar V.; Matović, Branko; Šćepanović, Maja; Popović, Zoran V.

(2009)

TY  - JOUR
AU  - Radović, Marko B.
AU  - Dohcevic-Mitrovic, Z. D.
AU  - Golubović, Aleksandar V.
AU  - Matović, Branko
AU  - Šćepanović, Maja
AU  - Popović, Zoran V.
PY  - 2009
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6845
AB  - Pure and 10 mol% Fe3+ doped CeO2 nanocrystals were synthesized by hydrothermal method using two different basic solutions (NH4OH and NaOH). All the samples were calcinated at 140 degrees C and 200 degrees C. The characterization of crystalline structure, vibrational and optical properties was performed using X-ray diffraction, Raman spectroscopy and spectroscopic ellipsometry. The obtained results showed that the Fe-doped samples are solid solutions with different size of nanocrystals, very dependent on the synthesis temperature and type of basic solution. The Raman measurements demonstrated electron molecular vibrational coupling and increase of oxygen vacancy concentration whereas doping provokes a small decrease of optical absorption edge in comparison with pure ceria.
T2  - Acta Physica Polonica. Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics
T1  - Hydrothermal Synthesis of CeO2 and Ce0.9Fe0.1O2 Nanocrystals
VL  - 116
IS  - 4
SP  - 614
EP  - 617
DO  - 10.12693/APhysPolA.116.614
ER  - 
@article{
author = "Radović, Marko B. and Dohcevic-Mitrovic, Z. D. and Golubović, Aleksandar V. and Matović, Branko and Šćepanović, Maja and Popović, Zoran V.",
year = "2009",
abstract = "Pure and 10 mol% Fe3+ doped CeO2 nanocrystals were synthesized by hydrothermal method using two different basic solutions (NH4OH and NaOH). All the samples were calcinated at 140 degrees C and 200 degrees C. The characterization of crystalline structure, vibrational and optical properties was performed using X-ray diffraction, Raman spectroscopy and spectroscopic ellipsometry. The obtained results showed that the Fe-doped samples are solid solutions with different size of nanocrystals, very dependent on the synthesis temperature and type of basic solution. The Raman measurements demonstrated electron molecular vibrational coupling and increase of oxygen vacancy concentration whereas doping provokes a small decrease of optical absorption edge in comparison with pure ceria.",
journal = "Acta Physica Polonica. Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics",
title = "Hydrothermal Synthesis of CeO2 and Ce0.9Fe0.1O2 Nanocrystals",
volume = "116",
number = "4",
pages = "614-617",
doi = "10.12693/APhysPolA.116.614"
}
Radović, M. B., Dohcevic-Mitrovic, Z. D., Golubović, A. V., Matović, B., Šćepanović, M.,& Popović, Z. V.. (2009). Hydrothermal Synthesis of CeO2 and Ce0.9Fe0.1O2 Nanocrystals. in Acta Physica Polonica. Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics, 116(4), 614-617.
https://doi.org/10.12693/APhysPolA.116.614
Radović MB, Dohcevic-Mitrovic ZD, Golubović AV, Matović B, Šćepanović M, Popović ZV. Hydrothermal Synthesis of CeO2 and Ce0.9Fe0.1O2 Nanocrystals. in Acta Physica Polonica. Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics. 2009;116(4):614-617.
doi:10.12693/APhysPolA.116.614 .
Radović, Marko B., Dohcevic-Mitrovic, Z. D., Golubović, Aleksandar V., Matović, Branko, Šćepanović, Maja, Popović, Zoran V., "Hydrothermal Synthesis of CeO2 and Ce0.9Fe0.1O2 Nanocrystals" in Acta Physica Polonica. Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics, 116, no. 4 (2009):614-617,
https://doi.org/10.12693/APhysPolA.116.614 . .
9
9
9

Effect of Fe2+ (Fe3+) Doping on Structural Properties of CeO2 Nanocrystals

Radović, Marko B.; Dohcevic-Mitrovic, Z.; Paunović, Novica M.; Šćepanović, Maja; Matović, Branko; Popović, Zoran V.

(2009)

TY  - JOUR
AU  - Radović, Marko B.
AU  - Dohcevic-Mitrovic, Z.
AU  - Paunović, Novica M.
AU  - Šćepanović, Maja
AU  - Matović, Branko
AU  - Popović, Zoran V.
PY  - 2009
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6835
AB  - We have measured the Raman scattering and magnetization of pure and Fe2+(Fe3+) doped CeO2 nanopowders at room temperature. The Raman scattering spectra revealed the existence of CeO2 fluorite cubic structure for all investigated samples. The Raman active mode at about 600 cm(-1), seen in all samples, can be ascribed to the CeO2 intrinsic oxygen vacancies. Additional Raman modes at 720 cm(-1), 1320 cm(-1) and 1600 cm(-1), which appear in the spectra of doped samples, can be assigned to maghemite (gamma-Fe2O3) cation deficient structure, to 2 omega(LO) IR-allowed overtone and two magnon structure, respectively. This implies that our powders are composed of mixed valence states and have defective structure. Presence of oxygen defect states and magnetic ions can be responsible for the observed ferromagnetism at room temperature in both pure and Fe doped samples.
T2  - Acta Physica Polonica. Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics
T1  - Effect of Fe2+ (Fe3+) Doping on Structural Properties of CeO2 Nanocrystals
VL  - 116
IS  - 1
SP  - 84
EP  - 87
DO  - 10.12693/APhysPolA.116.84
ER  - 
@article{
author = "Radović, Marko B. and Dohcevic-Mitrovic, Z. and Paunović, Novica M. and Šćepanović, Maja and Matović, Branko and Popović, Zoran V.",
year = "2009",
abstract = "We have measured the Raman scattering and magnetization of pure and Fe2+(Fe3+) doped CeO2 nanopowders at room temperature. The Raman scattering spectra revealed the existence of CeO2 fluorite cubic structure for all investigated samples. The Raman active mode at about 600 cm(-1), seen in all samples, can be ascribed to the CeO2 intrinsic oxygen vacancies. Additional Raman modes at 720 cm(-1), 1320 cm(-1) and 1600 cm(-1), which appear in the spectra of doped samples, can be assigned to maghemite (gamma-Fe2O3) cation deficient structure, to 2 omega(LO) IR-allowed overtone and two magnon structure, respectively. This implies that our powders are composed of mixed valence states and have defective structure. Presence of oxygen defect states and magnetic ions can be responsible for the observed ferromagnetism at room temperature in both pure and Fe doped samples.",
journal = "Acta Physica Polonica. Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics",
title = "Effect of Fe2+ (Fe3+) Doping on Structural Properties of CeO2 Nanocrystals",
volume = "116",
number = "1",
pages = "84-87",
doi = "10.12693/APhysPolA.116.84"
}
Radović, M. B., Dohcevic-Mitrovic, Z., Paunović, N. M., Šćepanović, M., Matović, B.,& Popović, Z. V.. (2009). Effect of Fe2+ (Fe3+) Doping on Structural Properties of CeO2 Nanocrystals. in Acta Physica Polonica. Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics, 116(1), 84-87.
https://doi.org/10.12693/APhysPolA.116.84
Radović MB, Dohcevic-Mitrovic Z, Paunović NM, Šćepanović M, Matović B, Popović ZV. Effect of Fe2+ (Fe3+) Doping on Structural Properties of CeO2 Nanocrystals. in Acta Physica Polonica. Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics. 2009;116(1):84-87.
doi:10.12693/APhysPolA.116.84 .
Radović, Marko B., Dohcevic-Mitrovic, Z., Paunović, Novica M., Šćepanović, Maja, Matović, Branko, Popović, Zoran V., "Effect of Fe2+ (Fe3+) Doping on Structural Properties of CeO2 Nanocrystals" in Acta Physica Polonica. Series A: General Physics, Physics of Condensed Matter, Optics and Quantum Electronics, Atomic and Molecular Physics, Applied Physics, 116, no. 1 (2009):84-87,
https://doi.org/10.12693/APhysPolA.116.84 . .
11
13
14

Temperature-dependent raman study of Ce0.75Nd0.25O2-delta nanocrystals

Dohcevic-Mitrovic, Z. D.; Radović, Marko B.; Šćepanović, Maja; Grujić-Brojčin, Mirjana; Popović, Zoran V.; Matović, Branko; Bošković, Snežana B.

(2007)

TY  - JOUR
AU  - Dohcevic-Mitrovic, Z. D.
AU  - Radović, Marko B.
AU  - Šćepanović, Maja
AU  - Grujić-Brojčin, Mirjana
AU  - Popović, Zoran V.
AU  - Matović, Branko
AU  - Bošković, Snežana B.
PY  - 2007
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/3318
AB  - Raman spectra of Nd doped ceria nanocrystals were measured by gradual heating and cooling over the temperature range of 293-1073 K and analyzed using the phonon confinement model that incorporates inhomogeneous strain and anharmonic effects. We have demonstrated that in nanograins, four-phonon anharmonic processes are more dominant at higher temperatures than size effects. After the heat treatment, Nd doped ceria nanocrystals remain of nanometric range (similar to 20 nm) while the concentration of oxygen vacancies is still high in ceria lattice, making this material convenient for solid oxide fuel cells application. (c) 2007 American Institute of Physics.
T2  - Applied Physics Letters
T1  - Temperature-dependent raman study of Ce0.75Nd0.25O2-delta nanocrystals
VL  - 91
IS  - 20
DO  - 10.1063/1.2815928
ER  - 
@article{
author = "Dohcevic-Mitrovic, Z. D. and Radović, Marko B. and Šćepanović, Maja and Grujić-Brojčin, Mirjana and Popović, Zoran V. and Matović, Branko and Bošković, Snežana B.",
year = "2007",
abstract = "Raman spectra of Nd doped ceria nanocrystals were measured by gradual heating and cooling over the temperature range of 293-1073 K and analyzed using the phonon confinement model that incorporates inhomogeneous strain and anharmonic effects. We have demonstrated that in nanograins, four-phonon anharmonic processes are more dominant at higher temperatures than size effects. After the heat treatment, Nd doped ceria nanocrystals remain of nanometric range (similar to 20 nm) while the concentration of oxygen vacancies is still high in ceria lattice, making this material convenient for solid oxide fuel cells application. (c) 2007 American Institute of Physics.",
journal = "Applied Physics Letters",
title = "Temperature-dependent raman study of Ce0.75Nd0.25O2-delta nanocrystals",
volume = "91",
number = "20",
doi = "10.1063/1.2815928"
}
Dohcevic-Mitrovic, Z. D., Radović, M. B., Šćepanović, M., Grujić-Brojčin, M., Popović, Z. V., Matović, B.,& Bošković, S. B.. (2007). Temperature-dependent raman study of Ce0.75Nd0.25O2-delta nanocrystals. in Applied Physics Letters, 91(20).
https://doi.org/10.1063/1.2815928
Dohcevic-Mitrovic ZD, Radović MB, Šćepanović M, Grujić-Brojčin M, Popović ZV, Matović B, Bošković SB. Temperature-dependent raman study of Ce0.75Nd0.25O2-delta nanocrystals. in Applied Physics Letters. 2007;91(20).
doi:10.1063/1.2815928 .
Dohcevic-Mitrovic, Z. D., Radović, Marko B., Šćepanović, Maja, Grujić-Brojčin, Mirjana, Popović, Zoran V., Matović, Branko, Bošković, Snežana B., "Temperature-dependent raman study of Ce0.75Nd0.25O2-delta nanocrystals" in Applied Physics Letters, 91, no. 20 (2007),
https://doi.org/10.1063/1.2815928 . .
33
26
31

Raman study of Ba-doped ceria nanopowders

Radović, Marko B.; Dohcevic-Mitrovic, Z.; Šćepanović, Maja; Grujić-Brojčin, Mirjana; Matović, Branko; Bošković, Snežana B.; Popvic, Z. V.

(2007)

TY  - JOUR
AU  - Radović, Marko B.
AU  - Dohcevic-Mitrovic, Z.
AU  - Šćepanović, Maja
AU  - Grujić-Brojčin, Mirjana
AU  - Matović, Branko
AU  - Bošković, Snežana B.
AU  - Popvic, Z. V.
PY  - 2007
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/3382
AB  - A series of Ce1-xBaxO2-y (5 LT = x LT = 0.20) nanometric powders were synthesized by self-propagating room temperature synthesis. XRD and Raman scattering measurements were used to characterize the samples. at room temperature. All the samples are solid solutions with fluorite type structure with an average crystallite size about 5 nm. The redshift and asymmetric broadening of the Raman F g mode can be well explained with combined confinement and strain effects because of the nanocrystalline powders nature. The appearance of the additional peaks at similar to 560 cm(-1) and similar to 600 cm(-1), are attributed to extrinsic and intrinsic O2- vacancies in ceria lattice. Raman spectra of temperature treated Ce0.80Ba0.20O2-delta sample revealed the instability of this system.
T2  - Science of Sintering
T1  - Raman study of Ba-doped ceria nanopowders
VL  - 39
IS  - 3
SP  - 281
EP  - 286
DO  - 10.2298/SOS0703281R
ER  - 
@article{
author = "Radović, Marko B. and Dohcevic-Mitrovic, Z. and Šćepanović, Maja and Grujić-Brojčin, Mirjana and Matović, Branko and Bošković, Snežana B. and Popvic, Z. V.",
year = "2007",
abstract = "A series of Ce1-xBaxO2-y (5 LT = x LT = 0.20) nanometric powders were synthesized by self-propagating room temperature synthesis. XRD and Raman scattering measurements were used to characterize the samples. at room temperature. All the samples are solid solutions with fluorite type structure with an average crystallite size about 5 nm. The redshift and asymmetric broadening of the Raman F g mode can be well explained with combined confinement and strain effects because of the nanocrystalline powders nature. The appearance of the additional peaks at similar to 560 cm(-1) and similar to 600 cm(-1), are attributed to extrinsic and intrinsic O2- vacancies in ceria lattice. Raman spectra of temperature treated Ce0.80Ba0.20O2-delta sample revealed the instability of this system.",
journal = "Science of Sintering",
title = "Raman study of Ba-doped ceria nanopowders",
volume = "39",
number = "3",
pages = "281-286",
doi = "10.2298/SOS0703281R"
}
Radović, M. B., Dohcevic-Mitrovic, Z., Šćepanović, M., Grujić-Brojčin, M., Matović, B., Bošković, S. B.,& Popvic, Z. V.. (2007). Raman study of Ba-doped ceria nanopowders. in Science of Sintering, 39(3), 281-286.
https://doi.org/10.2298/SOS0703281R
Radović MB, Dohcevic-Mitrovic Z, Šćepanović M, Grujić-Brojčin M, Matović B, Bošković SB, Popvic ZV. Raman study of Ba-doped ceria nanopowders. in Science of Sintering. 2007;39(3):281-286.
doi:10.2298/SOS0703281R .
Radović, Marko B., Dohcevic-Mitrovic, Z., Šćepanović, Maja, Grujić-Brojčin, Mirjana, Matović, Branko, Bošković, Snežana B., Popvic, Z. V., "Raman study of Ba-doped ceria nanopowders" in Science of Sintering, 39, no. 3 (2007):281-286,
https://doi.org/10.2298/SOS0703281R . .
15
15
15

The size and strain effects on the Raman spectra of Ce1-xNdxO2-delta (0 LT = x LT = 0.25) nanopowders

Dohcevic-Mitrovic, ZD; Scepanovic, MJ; Grujić-Brojčin, Mirjana; Popović, Zoran V.; Bošković, Snežana B.; Matović, Branko; Zinkevich, MV; Aldinger, F

(2006)

TY  - JOUR
AU  - Dohcevic-Mitrovic, ZD
AU  - Scepanovic, MJ
AU  - Grujić-Brojčin, Mirjana
AU  - Popović, Zoran V.
AU  - Bošković, Snežana B.
AU  - Matović, Branko
AU  - Zinkevich, MV
AU  - Aldinger, F
PY  - 2006
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2985
AB  - Ultrafine Ce1-xNdxO2-delta (x = 0-0.25) powders were synthesized by self-propagating room temperature synthesis. Raman spectra were measured at room temperature in the 300-700 cm(-1) spectral range. The shift and asymmetric broadening of the Raman F-2g mode at about 454 cm(-1) in pure and doped ceria samples could be explained with combined size and inhomogenous strain effects. Increased concentration of O2- vacancies with doping is followed by an appearance of new Raman feature at about 545 cm(-1). (c) 2005 Elsevier Ltd. All rights reserved.
T2  - Solid State Communications
T1  - The size and strain effects on the Raman spectra of Ce1-xNdxO2-delta (0 LT = x LT = 0.25) nanopowders
VL  - 137
IS  - 7
SP  - 387
EP  - 390
DO  - 10.1016/j.ssc.2005.12.006
ER  - 
@article{
author = "Dohcevic-Mitrovic, ZD and Scepanovic, MJ and Grujić-Brojčin, Mirjana and Popović, Zoran V. and Bošković, Snežana B. and Matović, Branko and Zinkevich, MV and Aldinger, F",
year = "2006",
abstract = "Ultrafine Ce1-xNdxO2-delta (x = 0-0.25) powders were synthesized by self-propagating room temperature synthesis. Raman spectra were measured at room temperature in the 300-700 cm(-1) spectral range. The shift and asymmetric broadening of the Raman F-2g mode at about 454 cm(-1) in pure and doped ceria samples could be explained with combined size and inhomogenous strain effects. Increased concentration of O2- vacancies with doping is followed by an appearance of new Raman feature at about 545 cm(-1). (c) 2005 Elsevier Ltd. All rights reserved.",
journal = "Solid State Communications",
title = "The size and strain effects on the Raman spectra of Ce1-xNdxO2-delta (0 LT = x LT = 0.25) nanopowders",
volume = "137",
number = "7",
pages = "387-390",
doi = "10.1016/j.ssc.2005.12.006"
}
Dohcevic-Mitrovic, Z., Scepanovic, M., Grujić-Brojčin, M., Popović, Z. V., Bošković, S. B., Matović, B., Zinkevich, M.,& Aldinger, F.. (2006). The size and strain effects on the Raman spectra of Ce1-xNdxO2-delta (0 LT = x LT = 0.25) nanopowders. in Solid State Communications, 137(7), 387-390.
https://doi.org/10.1016/j.ssc.2005.12.006
Dohcevic-Mitrovic Z, Scepanovic M, Grujić-Brojčin M, Popović ZV, Bošković SB, Matović B, Zinkevich M, Aldinger F. The size and strain effects on the Raman spectra of Ce1-xNdxO2-delta (0 LT = x LT = 0.25) nanopowders. in Solid State Communications. 2006;137(7):387-390.
doi:10.1016/j.ssc.2005.12.006 .
Dohcevic-Mitrovic, ZD, Scepanovic, MJ, Grujić-Brojčin, Mirjana, Popović, Zoran V., Bošković, Snežana B., Matović, Branko, Zinkevich, MV, Aldinger, F, "The size and strain effects on the Raman spectra of Ce1-xNdxO2-delta (0 LT = x LT = 0.25) nanopowders" in Solid State Communications, 137, no. 7 (2006):387-390,
https://doi.org/10.1016/j.ssc.2005.12.006 . .
117
106
118

Ce1-xY(Nd)(x)O2-delta nanopowders: potential materials for intermediate temperature solid oxide fuel cells

Dohcevic-Mitrovic, Z. D.; Grujić-Brojčin, Mirjana; Šćepanović, Maja; Popović, Zoran V.; Bošković, Snežana B.; Matović, Branko; Zinkevich, M.; Aldinger, F.

(2006)

TY  - JOUR
AU  - Dohcevic-Mitrovic, Z. D.
AU  - Grujić-Brojčin, Mirjana
AU  - Šćepanović, Maja
AU  - Popović, Zoran V.
AU  - Bošković, Snežana B.
AU  - Matović, Branko
AU  - Zinkevich, M.
AU  - Aldinger, F.
PY  - 2006
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6619
AB  - Nanopowdered solid solution Ce1-xY(Nd)(x)O2-delta samples ( 0.1 LT = x LT = 0.25) were made by self-propagating room temperature (SPRT) synthesis. The first-order Raman spectra of Ce1-xY(Nd)(x)O2-delta samples measured at room temperature exhibit three broad features: the main Raman active F-2g mode at about 450 cm(-1) and two broad features at about 550 (545) and 600 cm-1. The mode at similar to 600 cm(-1) was assigned to the intrinsic oxygen vacancies due to the nonstoichiometry of ceria nanopowders. The mode at about 550 (545) cm(-1) was attributed to the oxygen vacancies introduced into the ceria lattice whenever Ce4+ ions are replaced with trivalent cations (Y3+, Nd3+). The intensity of this mode increases with doping in both series of samples, indicating a change of O2- vacancy concentration. The mode frequency shifts in opposite direction in Y- and Nd-doped samples with doping level, suggesting that different types of defect space can occur in Y- and Nd-doped ceria nanopowders.
T2  - Journal of Physics: Condensed Matter
T1  - Ce1-xY(Nd)(x)O2-delta nanopowders: potential materials for intermediate temperature solid oxide fuel cells
VL  - 18
IS  - 33
SP  - S2061
EP  - S2068
DO  - 10.1088/0953-8984/18/33/S22
ER  - 
@article{
author = "Dohcevic-Mitrovic, Z. D. and Grujić-Brojčin, Mirjana and Šćepanović, Maja and Popović, Zoran V. and Bošković, Snežana B. and Matović, Branko and Zinkevich, M. and Aldinger, F.",
year = "2006",
abstract = "Nanopowdered solid solution Ce1-xY(Nd)(x)O2-delta samples ( 0.1 LT = x LT = 0.25) were made by self-propagating room temperature (SPRT) synthesis. The first-order Raman spectra of Ce1-xY(Nd)(x)O2-delta samples measured at room temperature exhibit three broad features: the main Raman active F-2g mode at about 450 cm(-1) and two broad features at about 550 (545) and 600 cm-1. The mode at similar to 600 cm(-1) was assigned to the intrinsic oxygen vacancies due to the nonstoichiometry of ceria nanopowders. The mode at about 550 (545) cm(-1) was attributed to the oxygen vacancies introduced into the ceria lattice whenever Ce4+ ions are replaced with trivalent cations (Y3+, Nd3+). The intensity of this mode increases with doping in both series of samples, indicating a change of O2- vacancy concentration. The mode frequency shifts in opposite direction in Y- and Nd-doped samples with doping level, suggesting that different types of defect space can occur in Y- and Nd-doped ceria nanopowders.",
journal = "Journal of Physics: Condensed Matter",
title = "Ce1-xY(Nd)(x)O2-delta nanopowders: potential materials for intermediate temperature solid oxide fuel cells",
volume = "18",
number = "33",
pages = "S2061-S2068",
doi = "10.1088/0953-8984/18/33/S22"
}
Dohcevic-Mitrovic, Z. D., Grujić-Brojčin, M., Šćepanović, M., Popović, Z. V., Bošković, S. B., Matović, B., Zinkevich, M.,& Aldinger, F.. (2006). Ce1-xY(Nd)(x)O2-delta nanopowders: potential materials for intermediate temperature solid oxide fuel cells. in Journal of Physics: Condensed Matter, 18(33), S2061-S2068.
https://doi.org/10.1088/0953-8984/18/33/S22
Dohcevic-Mitrovic ZD, Grujić-Brojčin M, Šćepanović M, Popović ZV, Bošković SB, Matović B, Zinkevich M, Aldinger F. Ce1-xY(Nd)(x)O2-delta nanopowders: potential materials for intermediate temperature solid oxide fuel cells. in Journal of Physics: Condensed Matter. 2006;18(33):S2061-S2068.
doi:10.1088/0953-8984/18/33/S22 .
Dohcevic-Mitrovic, Z. D., Grujić-Brojčin, Mirjana, Šćepanović, Maja, Popović, Zoran V., Bošković, Snežana B., Matović, Branko, Zinkevich, M., Aldinger, F., "Ce1-xY(Nd)(x)O2-delta nanopowders: potential materials for intermediate temperature solid oxide fuel cells" in Journal of Physics: Condensed Matter, 18, no. 33 (2006):S2061-S2068,
https://doi.org/10.1088/0953-8984/18/33/S22 . .
59
46
57

Infrared study of laser synthesized anatase TiO2 nanopowders

Grujić-Brojčin, Mirjana; Scepanovic, MJ; Dohcevic-Mitrovic, ZD; Hinic, I; Matović, Branko; Stanisic, G; Popović, Zoran V.

(2005)

TY  - JOUR
AU  - Grujić-Brojčin, Mirjana
AU  - Scepanovic, MJ
AU  - Dohcevic-Mitrovic, ZD
AU  - Hinic, I
AU  - Matović, Branko
AU  - Stanisic, G
AU  - Popović, Zoran V.
PY  - 2005
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2896
AB  - Nanosized titanium dioxide (TiO2) is synthesized by laser-induced pyrolysis using titanium isopropoxide as a liquid precursor. The specific surface area of as-produced nanopowders measured by the Brunauer-Emmett-Teller method (BET) varies from 84 to 110 m(2)g(-1). X-ray diffraction (XRD) and Raman scattering, showed that the TiO2 nanocrystals had an anatase structure. The rain size of the nanoparticles was estimated from scanning electron microscopy, XRD and BET measurements. The reflection spectra of nanocrystalline TiO2 pressed pellets has been measured in the region between 80 and 1500 cm(-1) by Fourier transform infrared spectroscopy. To interpret the experimental results, a model based on a generalized Bruggeman effective medium approximation of a dielectric function has been proposed. It is based on the polycrystalline character of TIO2 nanoparticles including island-structure and porosity of the nanopowders, along with the anatase single crystal dielectric functions. Thus, by comparing the results of calculated and experimental infrared (IR) spectra, the values of microscopic parameters of nanocrystalline powders can be deduced.
T2  - Journal of Physics. D: Applied Physics
T1  - Infrared study of laser synthesized anatase TiO2 nanopowders
VL  - 38
IS  - 9
SP  - 1415
EP  - 1420
DO  - 10.1088/0022-3727/38/9/014
ER  - 
@article{
author = "Grujić-Brojčin, Mirjana and Scepanovic, MJ and Dohcevic-Mitrovic, ZD and Hinic, I and Matović, Branko and Stanisic, G and Popović, Zoran V.",
year = "2005",
abstract = "Nanosized titanium dioxide (TiO2) is synthesized by laser-induced pyrolysis using titanium isopropoxide as a liquid precursor. The specific surface area of as-produced nanopowders measured by the Brunauer-Emmett-Teller method (BET) varies from 84 to 110 m(2)g(-1). X-ray diffraction (XRD) and Raman scattering, showed that the TiO2 nanocrystals had an anatase structure. The rain size of the nanoparticles was estimated from scanning electron microscopy, XRD and BET measurements. The reflection spectra of nanocrystalline TiO2 pressed pellets has been measured in the region between 80 and 1500 cm(-1) by Fourier transform infrared spectroscopy. To interpret the experimental results, a model based on a generalized Bruggeman effective medium approximation of a dielectric function has been proposed. It is based on the polycrystalline character of TIO2 nanoparticles including island-structure and porosity of the nanopowders, along with the anatase single crystal dielectric functions. Thus, by comparing the results of calculated and experimental infrared (IR) spectra, the values of microscopic parameters of nanocrystalline powders can be deduced.",
journal = "Journal of Physics. D: Applied Physics",
title = "Infrared study of laser synthesized anatase TiO2 nanopowders",
volume = "38",
number = "9",
pages = "1415-1420",
doi = "10.1088/0022-3727/38/9/014"
}
Grujić-Brojčin, M., Scepanovic, M., Dohcevic-Mitrovic, Z., Hinic, I., Matović, B., Stanisic, G.,& Popović, Z. V.. (2005). Infrared study of laser synthesized anatase TiO2 nanopowders. in Journal of Physics. D: Applied Physics, 38(9), 1415-1420.
https://doi.org/10.1088/0022-3727/38/9/014
Grujić-Brojčin M, Scepanovic M, Dohcevic-Mitrovic Z, Hinic I, Matović B, Stanisic G, Popović ZV. Infrared study of laser synthesized anatase TiO2 nanopowders. in Journal of Physics. D: Applied Physics. 2005;38(9):1415-1420.
doi:10.1088/0022-3727/38/9/014 .
Grujić-Brojčin, Mirjana, Scepanovic, MJ, Dohcevic-Mitrovic, ZD, Hinic, I, Matović, Branko, Stanisic, G, Popović, Zoran V., "Infrared study of laser synthesized anatase TiO2 nanopowders" in Journal of Physics. D: Applied Physics, 38, no. 9 (2005):1415-1420,
https://doi.org/10.1088/0022-3727/38/9/014 . .
50
55
59