Janaćković, Đorđe T.

Link to this page

Authority KeyName Variants
d3facd53-4d47-4e09-9850-3929c2f6d6c0
  • Janaćković, Đorđe T. (40)
Projects
Synthesis, processing and applications of nanostructured multifunctional materials with defined properties Directed synthesis, structure and properties of multifunctional materials
ERC advanced grant “PICOPROP” [670918] Reinforcing of Nanotechnology and Functional Materials Centre
Functional, Functionalized and Advanced Nanomaterials Synthesis, processing and characterization of nanostructured materials for application in the field of energy, mechanical engineering, environmental protection and biomedicine
Magnetic and radionuclide labeled nanostructured materials for medical applications National Sciences and Engineering Research Council of Canada (NSERC)
Swiss National Science Foundation [160169] AIT grant
CNRS Chaire Total Visiting Professorship Program CNR Short Term Mobility Program
EUREKA Project E! [4141] Strengthening of the MagBioVin Research and Innovation Team for Development of Novel Approaches for Tumour Therapy based on Nanostructured Materials
Study of the Synthesis, Structure and Activity of Natural and Synthetic Organic Compounds Size-, shape- and structure- dependent properties of nanoparticles and nanocomposites
Biological response modifiers in physiological and pathological conditions Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200135 (University of Belgrade, Faculty of Technology and Metallurgy)
Materials of Reduced Dimensions for Efficient Light Harvesting and Energy conversion MBR Global Water Initiatives
Ministry of Science and Environmental Protection of the Republic of Serbia Ministry of Science and Technological Development [III45019]
Ministry of Science and Technological Development of the Republic of Serbia [142070B, EUREKA E! 3033], Ministry of Education and Science of the Republic of Latvia [EUREKA E! 3033] Ministry of Science and Technological Development, Republic of Serbia [142061, 142070]
Ministry of Science and Technology of the Republic of Serbia [142070B], Romanian Ministry of Education and Research [307/2006 - RETEBIOGLAS], Bionanocomposit [EUREKA E! 3033] Ministry of Science and Technology Republic of Serbia [142070B], EUREKA E [3033]
Ministry of Science Republic of Serbia [142070B], EUREKA [E! 4141] Nanotech FTM, FP7-REGPOT [245916], UEFISCDI [304/2011]
NASA [NNX09AV07A] NSF CREST [HRD-0833184]

Author's Bibliography

Highly Active Rutile TiO2 Nanocrystalline Photocatalysts

Đokić, Veljko R.; Marinković, Aleksandar D.; Petrović, Rada D.; Ersen, Ovidiu; Zafeiratos, Spyridon; Mitrić, Miodrag; Ophus, Colin; Radmilović, Velimir R.; Janaćković, Đorđe T.

(2020)

TY  - JOUR
AU  - Đokić, Veljko R.
AU  - Marinković, Aleksandar D.
AU  - Petrović, Rada D.
AU  - Ersen, Ovidiu
AU  - Zafeiratos, Spyridon
AU  - Mitrić, Miodrag
AU  - Ophus, Colin
AU  - Radmilović, Velimir R.
AU  - Janaćković, Đorđe T.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9106
AB  - The controllable synthesis of rutile TiO2 single crystal particles with the preferential orientation of {111} facets still remains a scientific and technological challenge. Here, we developed a facile route for fabrication of rutile TiO2 nanorod crystals (RTiO2NRs) having high ratios of oxidative {111} to reductive {110} surfaces. RTiO2NRs were synthesized using a peroxo-titanium complex (PTC) approach, which was controlled by changing the Ti/H2O2 ratio. The thus obtained RTiO2NRs revealed a high tendency to agglomerate through orientation-dependent attachment along the {110} facets. This resulted in an increased {111}/{110} surface ratio and led to a markedly improved photocatalytic activity of RTiO2NR aggregates. The reported findings illustrate the rich potential of the herein proposed facile and energy-efficient synthesis of nanostructured rutile TiO2-based photocatalysts.
T2  - ACS Applied Materials & Interfaces
T1  - Highly Active Rutile TiO2 Nanocrystalline Photocatalysts
VL  - 12
IS  - 29
SP  - 33058
EP  - 33068
DO  - 10.1021/acsami.0c03150
ER  - 
@article{
author = "Đokić, Veljko R. and Marinković, Aleksandar D. and Petrović, Rada D. and Ersen, Ovidiu and Zafeiratos, Spyridon and Mitrić, Miodrag and Ophus, Colin and Radmilović, Velimir R. and Janaćković, Đorđe T.",
year = "2020",
url = "https://vinar.vin.bg.ac.rs/handle/123456789/9106",
abstract = "The controllable synthesis of rutile TiO2 single crystal particles with the preferential orientation of {111} facets still remains a scientific and technological challenge. Here, we developed a facile route for fabrication of rutile TiO2 nanorod crystals (RTiO2NRs) having high ratios of oxidative {111} to reductive {110} surfaces. RTiO2NRs were synthesized using a peroxo-titanium complex (PTC) approach, which was controlled by changing the Ti/H2O2 ratio. The thus obtained RTiO2NRs revealed a high tendency to agglomerate through orientation-dependent attachment along the {110} facets. This resulted in an increased {111}/{110} surface ratio and led to a markedly improved photocatalytic activity of RTiO2NR aggregates. The reported findings illustrate the rich potential of the herein proposed facile and energy-efficient synthesis of nanostructured rutile TiO2-based photocatalysts.",
journal = "ACS Applied Materials & Interfaces",
title = "Highly Active Rutile TiO2 Nanocrystalline Photocatalysts",
volume = "12",
number = "29",
pages = "33058-33068",
doi = "10.1021/acsami.0c03150"
}
Đokić, V. R., Marinković, A. D., Petrović, R. D., Ersen, O., Zafeiratos, S., Mitrić, M., Ophus, C., Radmilović, V. R.,& Janaćković, Đ. T. (2020). Highly Active Rutile TiO2 Nanocrystalline Photocatalysts.
ACS Applied Materials & Interfaces, 12(29), 33058-33068.
https://doi.org/10.1021/acsami.0c03150
Đokić VR, Marinković AD, Petrović RD, Ersen O, Zafeiratos S, Mitrić M, Ophus C, Radmilović VR, Janaćković ĐT. Highly Active Rutile TiO2 Nanocrystalline Photocatalysts. ACS Applied Materials & Interfaces. 2020;12(29):33058-33068
Đokić Veljko R., Marinković Aleksandar D., Petrović Rada D., Ersen Ovidiu, Zafeiratos Spyridon, Mitrić Miodrag, Ophus Colin, Radmilović Velimir R., Janaćković Đorđe T., "Highly Active Rutile TiO2 Nanocrystalline Photocatalysts" 12, no. 29 (2020):33058-33068,
https://doi.org/10.1021/acsami.0c03150 .
1
2

Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping

Vujančević, Jelena; Andričević, Pavao; Bjelajac, Anđelika; Đokić, Veljko R.; Popović, Maja; Rakočević, Zlatko Lj.; Horvath, Endre; Kollar, Marton; Nafradi, Balint; Schiller, Andreas; Domanski, Konrad; Forro, Laszlo; Pavlović, Vera P.; Janaćković, Đorđe T.

(2019)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko R.
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
AU  - Horvath, Endre
AU  - Kollar, Marton
AU  - Nafradi, Balint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forro, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe T.
PY  - 2019
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8538
AB  - Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019
T2  - Ceramics International
T1  - Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
VL  - 45
IS  - 8
SP  - 10013
EP  - 10020
DO  - 10.1016/j.ceramint.2019.02.045
ER  - 
@article{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko R. and Popović, Maja and Rakočević, Zlatko Lj. and Horvath, Endre and Kollar, Marton and Nafradi, Balint and Schiller, Andreas and Domanski, Konrad and Forro, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe T.",
year = "2019",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/8538",
abstract = "Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019",
journal = "Ceramics International",
title = "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping",
volume = "45",
number = "8",
pages = "10013-10020",
doi = "10.1016/j.ceramint.2019.02.045"
}
Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V. R., Popović, M., Rakočević, Z. Lj., Horvath, E., Kollar, M., Nafradi, B., Schiller, A., Domanski, K., Forro, L., Pavlović, V. P.,& Janaćković, Đ. T. (2019). Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping.
Ceramics International, 45(8), 10013-10020.
https://doi.org/10.1016/j.ceramint.2019.02.045
Vujančević J, Andričević P, Bjelajac A, Đokić VR, Popović M, Rakočević ZL, Horvath E, Kollar M, Nafradi B, Schiller A, Domanski K, Forro L, Pavlović VP, Janaćković ĐT. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International. 2019;45(8):10013-10020
Vujančević Jelena, Andričević Pavao, Bjelajac Anđelika, Đokić Veljko R., Popović Maja, Rakočević Zlatko Lj., Horvath Endre, Kollar Marton, Nafradi Balint, Schiller Andreas, Domanski Konrad, Forro Laszlo, Pavlović Vera P., Janaćković Đorđe T., "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping" 45, no. 8 (2019):10013-10020,
https://doi.org/10.1016/j.ceramint.2019.02.045 .
3
2
1

Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping

Vujančević, Jelena; Andričević, Pavao; Bjelajac, Anđelika; Đokić, Veljko R.; Popović, Maja; Rakočević, Zlatko Lj.; Horvath, Endre; Kollar, Marton; Nafradi, Balint; Schiller, Andreas; Domanski, Konrad; Forro, Laszlo; Pavlović, Vera P.; Janaćković, Đorđe T.

(2019)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko R.
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
AU  - Horvath, Endre
AU  - Kollar, Marton
AU  - Nafradi, Balint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forro, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe T.
PY  - 2019
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8539
AB  - Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019
T2  - Ceramics International
T1  - Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
VL  - 45
IS  - 8
SP  - 10013
EP  - 10020
DO  - 10.1016/j.ceramint.2019.02.045
ER  - 
@article{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko R. and Popović, Maja and Rakočević, Zlatko Lj. and Horvath, Endre and Kollar, Marton and Nafradi, Balint and Schiller, Andreas and Domanski, Konrad and Forro, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe T.",
year = "2019",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/8539",
abstract = "Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019",
journal = "Ceramics International",
title = "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping",
volume = "45",
number = "8",
pages = "10013-10020",
doi = "10.1016/j.ceramint.2019.02.045"
}
Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V. R., Popović, M., Rakočević, Z. Lj., Horvath, E., Kollar, M., Nafradi, B., Schiller, A., Domanski, K., Forro, L., Pavlović, V. P.,& Janaćković, Đ. T. (2019). Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping.
Ceramics International, 45(8), 10013-10020.
https://doi.org/10.1016/j.ceramint.2019.02.045
Vujančević J, Andričević P, Bjelajac A, Đokić VR, Popović M, Rakočević ZL, Horvath E, Kollar M, Nafradi B, Schiller A, Domanski K, Forro L, Pavlović VP, Janaćković ĐT. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International. 2019;45(8):10013-10020
Vujančević Jelena, Andričević Pavao, Bjelajac Anđelika, Đokić Veljko R., Popović Maja, Rakočević Zlatko Lj., Horvath Endre, Kollar Marton, Nafradi Balint, Schiller Andreas, Domanski Konrad, Forro Laszlo, Pavlović Vera P., Janaćković Đorđe T., "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping" 45, no. 8 (2019):10013-10020,
https://doi.org/10.1016/j.ceramint.2019.02.045 .
3
2
1

Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air

Bjelajac, Anđelika; Petrović, Rada; Popović, Maja; Rakočević, Zlatko Lj.; Socol, Gabriel; Mihailescu, Ion N.; Janaćković, Đorđe T.

(2019)

TY  - JOUR
AU  - Bjelajac, Anđelika
AU  - Petrović, Rada
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
AU  - Socol, Gabriel
AU  - Mihailescu, Ion N.
AU  - Janaćković, Đorđe T.
PY  - 2019
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8589
AB  - The ∼60 nm wide and ∼2 μm long TiO2 nanotubes were obtained by anodization of Ti films sputtered on F-doped tin oxide glass. For N-doping the samples were annealed in ammonia atmosphere. The effect of pre- and post-annealing in air on the nature and amount of incorporated N was studied by X-ray photoelectron spectroscopy. By measuring the absorption spectra of the obtained samples and interpreting the corresponding Tauc plots it was shown that the sample annealed just in ammonia showed the highest visible light absorption even after sputtering cleaning and a decrease of N amount from 3.8% to 1%. Pre and/or post annealing in air led to smaller amount of incorporated N, that caused less pronounced absorption enhancement and smaller band gap narrowing compared to the sample annealed only in ammonia. By fitting of N 1 s line, the contribution that was assigned to substitutional N was detected only in the samples that did not sustained post-annealing. The study showed that post-annealing in air might lead to partial conversion of N atoms in TiO2 to oxidized nitrogen species that are easily removed with sputtering. It is also possible that substitutional nitrogen was suppressed by oxygen from air to move to interstitial site. Weakly bonded NOx surface species, which are cleaned away by sputtering, can be removed by post-annealing in air. Those surface species could act as sensitizers and when their amounts are reduced, the core absorption properties, as a result of interstitial incorporation of N in TiO2 structure, were revealed. Much lower visible light sensitization was achieved in the case of pre-annealed sample in comparison to sample without pre-annealing, regardless the same quantity and type of incorporated nitrogen.
T2  - Thin Solid Films
T1  - Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air
VL  - 692
SP  - 137598
DO  - 10.1016/j.tsf.2019.137598
ER  - 
@article{
author = "Bjelajac, Anđelika and Petrović, Rada and Popović, Maja and Rakočević, Zlatko Lj. and Socol, Gabriel and Mihailescu, Ion N. and Janaćković, Đorđe T.",
year = "2019",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/8589",
abstract = "The ∼60 nm wide and ∼2 μm long TiO2 nanotubes were obtained by anodization of Ti films sputtered on F-doped tin oxide glass. For N-doping the samples were annealed in ammonia atmosphere. The effect of pre- and post-annealing in air on the nature and amount of incorporated N was studied by X-ray photoelectron spectroscopy. By measuring the absorption spectra of the obtained samples and interpreting the corresponding Tauc plots it was shown that the sample annealed just in ammonia showed the highest visible light absorption even after sputtering cleaning and a decrease of N amount from 3.8% to 1%. Pre and/or post annealing in air led to smaller amount of incorporated N, that caused less pronounced absorption enhancement and smaller band gap narrowing compared to the sample annealed only in ammonia. By fitting of N 1 s line, the contribution that was assigned to substitutional N was detected only in the samples that did not sustained post-annealing. The study showed that post-annealing in air might lead to partial conversion of N atoms in TiO2 to oxidized nitrogen species that are easily removed with sputtering. It is also possible that substitutional nitrogen was suppressed by oxygen from air to move to interstitial site. Weakly bonded NOx surface species, which are cleaned away by sputtering, can be removed by post-annealing in air. Those surface species could act as sensitizers and when their amounts are reduced, the core absorption properties, as a result of interstitial incorporation of N in TiO2 structure, were revealed. Much lower visible light sensitization was achieved in the case of pre-annealed sample in comparison to sample without pre-annealing, regardless the same quantity and type of incorporated nitrogen.",
journal = "Thin Solid Films",
title = "Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air",
volume = "692",
pages = "137598",
doi = "10.1016/j.tsf.2019.137598"
}
Bjelajac, A., Petrović, R., Popović, M., Rakočević, Z. Lj., Socol, G., Mihailescu, I. N.,& Janaćković, Đ. T. (2019). Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air.
Thin Solid Films, 692, 137598.
https://doi.org/10.1016/j.tsf.2019.137598
Bjelajac A, Petrović R, Popović M, Rakočević ZL, Socol G, Mihailescu IN, Janaćković ĐT. Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air. Thin Solid Films. 2019;692:137598
Bjelajac Anđelika, Petrović Rada, Popović Maja, Rakočević Zlatko Lj., Socol Gabriel, Mihailescu Ion N., Janaćković Đorđe T., "Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air" 692 (2019):137598,
https://doi.org/10.1016/j.tsf.2019.137598 .
3
4
3

Effective removal of Reactive Orange 16 dye from aqueous solution by amine-functionalized sepiolites

Lazarević, Slavica; Marjanović, Vesna; Janković-Častvan, Ivona; Živković, Ljiljana; Janaćković, Đorđe T.; Petrović, Rada

(2019)

TY  - JOUR
AU  - Lazarević, Slavica
AU  - Marjanović, Vesna
AU  - Janković-Častvan, Ivona
AU  - Živković, Ljiljana
AU  - Janaćković, Đorđe T.
AU  - Petrović, Rada
PY  - 2019
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8594
AB  - Natural and acid-activated sepiolites, functionalized by covalent grafting of [3-(2-aminoethylamino) propyl]trimethoxy-silane were used as adsorbents for the removal of an anionic Reactive Orange 16 dye from aqueous solutions. The influence of initial pH (pHi) on the adsorption was first investigated in comparison with the adsorption onto unmodified sepiolites; then the dye removal process by modified samples was subjected to kinetic and equilibrium studies at pHi = 2.0 or 5.0, at different temperatures. Results showed that the adsorption of dye was favorable at lower pHi and at higher temperatures, in terms of adsorption capacity and rate of adsorption. The binding sites on the adsorbents surfaces were considered to be protonated amine groups, which play a role in the electrostatic interactions with the dye anions at pHi = 2.0. Formation of hydrogen bonds between hydrogen from amine groups and oxygen from the dye and van der Waals forces were proposed as the mechanisms of adsorption at pHi = 5.0. The adsorption kinetics was well fitted to the pseudo-second- order kinetic model, while the equilibrium adsorption data were well correlated with the Sips isotherm. The adsorption capacity of both modified sepiolites was much higher than of the parent samples, whereas the capacity of the functionalized acid-activated sepiolite was higher (~172 mg/g) than of the functionalized natural sepiolite (~158 mg/g) at 298 K, pHi 5.0.
T2  - Desalination and Water Treatment
T1  - Effective removal of Reactive Orange 16 dye from aqueous solution by amine-functionalized sepiolites
VL  - 163
SP  - 376
EP  - 384
DO  - 10.5004/dwt.2019.24437
ER  - 
@article{
author = "Lazarević, Slavica and Marjanović, Vesna and Janković-Častvan, Ivona and Živković, Ljiljana and Janaćković, Đorđe T. and Petrović, Rada",
year = "2019",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/8594",
abstract = "Natural and acid-activated sepiolites, functionalized by covalent grafting of [3-(2-aminoethylamino) propyl]trimethoxy-silane were used as adsorbents for the removal of an anionic Reactive Orange 16 dye from aqueous solutions. The influence of initial pH (pHi) on the adsorption was first investigated in comparison with the adsorption onto unmodified sepiolites; then the dye removal process by modified samples was subjected to kinetic and equilibrium studies at pHi = 2.0 or 5.0, at different temperatures. Results showed that the adsorption of dye was favorable at lower pHi and at higher temperatures, in terms of adsorption capacity and rate of adsorption. The binding sites on the adsorbents surfaces were considered to be protonated amine groups, which play a role in the electrostatic interactions with the dye anions at pHi = 2.0. Formation of hydrogen bonds between hydrogen from amine groups and oxygen from the dye and van der Waals forces were proposed as the mechanisms of adsorption at pHi = 5.0. The adsorption kinetics was well fitted to the pseudo-second- order kinetic model, while the equilibrium adsorption data were well correlated with the Sips isotherm. The adsorption capacity of both modified sepiolites was much higher than of the parent samples, whereas the capacity of the functionalized acid-activated sepiolite was higher (~172 mg/g) than of the functionalized natural sepiolite (~158 mg/g) at 298 K, pHi 5.0.",
journal = "Desalination and Water Treatment",
title = "Effective removal of Reactive Orange 16 dye from aqueous solution by amine-functionalized sepiolites",
volume = "163",
pages = "376-384",
doi = "10.5004/dwt.2019.24437"
}
Lazarević, S., Marjanović, V., Janković-Častvan, I., Živković, L., Janaćković, Đ. T.,& Petrović, R. (2019). Effective removal of Reactive Orange 16 dye from aqueous solution by amine-functionalized sepiolites.
Desalination and Water Treatment, 163, 376-384.
https://doi.org/10.5004/dwt.2019.24437
Lazarević S, Marjanović V, Janković-Častvan I, Živković L, Janaćković ĐT, Petrović R. Effective removal of Reactive Orange 16 dye from aqueous solution by amine-functionalized sepiolites. Desalination and Water Treatment. 2019;163:376-384
Lazarević Slavica, Marjanović Vesna, Janković-Častvan Ivona, Živković Ljiljana, Janaćković Đorđe T., Petrović Rada, "Effective removal of Reactive Orange 16 dye from aqueous solution by amine-functionalized sepiolites" 163 (2019):376-384,
https://doi.org/10.5004/dwt.2019.24437 .
1

Structure and photocatalytic properties of sintered TiO2 nanotube arrays

Vujančević, Jelena; Bjelajac, Anđelika; Ćirković, Jovana; Pavlović, Vera P.; Horvath, Endre; Forro, Laszlo; Vlahović, Branislav; Mitrić, Miodrag; Janaćković, Đorđe T.; Pavlović, Vladimir B.

(2018)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horvath, Endre
AU  - Forro, Laszlo
AU  - Vlahović, Branislav
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe T.
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://www.doiserbia.nb.rs/Article.aspx?ID=0350-820X1801039V
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7651
AB  - One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films.
T2  - Science of Sintering
T1  - Structure and photocatalytic properties of sintered TiO2 nanotube arrays
VL  - 50
IS  - 1
SP  - 39
EP  - 50
DO  - 10.2298/SOS1801039V
ER  - 
@article{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horvath, Endre and Forro, Laszlo and Vlahović, Branislav and Mitrić, Miodrag and Janaćković, Đorđe T. and Pavlović, Vladimir B.",
year = "2018",
url = "https://www.doiserbia.nb.rs/Article.aspx?ID=0350-820X1801039V, http://vinar.vin.bg.ac.rs/handle/123456789/7651",
abstract = "One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films.",
journal = "Science of Sintering",
title = "Structure and photocatalytic properties of sintered TiO2 nanotube arrays",
volume = "50",
number = "1",
pages = "39-50",
doi = "10.2298/SOS1801039V"
}
Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horvath, E., Forro, L., Vlahović, B., Mitrić, M., Janaćković, Đ. T.,& Pavlović, V. B. (2018). Structure and photocatalytic properties of sintered TiO2 nanotube arrays.
Science of Sintering, 50(1), 39-50.
https://doi.org/10.2298/SOS1801039V
Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horvath E, Forro L, Vlahović B, Mitrić M, Janaćković ĐT, Pavlović VB. Structure and photocatalytic properties of sintered TiO2 nanotube arrays. Science of Sintering. 2018;50(1):39-50
Vujančević Jelena, Bjelajac Anđelika, Ćirković Jovana, Pavlović Vera P., Horvath Endre, Forro Laszlo, Vlahović Branislav, Mitrić Miodrag, Janaćković Đorđe T., Pavlović Vladimir B., "Structure and photocatalytic properties of sintered TiO2 nanotube arrays" 50, no. 1 (2018):39-50,
https://doi.org/10.2298/SOS1801039V .
5
6
6

Absorption boost of TiO2 nanotubes by doping with N and sensitization with CdS quantum dots

Bjelajac, Anđelika; Đokić, Veljko R.; Petrovic, Rada; Bundaleski, Nenad; Socol, Gabriel; Mihailescu, Ion N.; Rakočević, Zlatko Lj.; Janaćković, Đorđe T.

(2017)

TY  - JOUR
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko R.
AU  - Petrovic, Rada
AU  - Bundaleski, Nenad
AU  - Socol, Gabriel
AU  - Mihailescu, Ion N.
AU  - Rakočević, Zlatko Lj.
AU  - Janaćković, Đorđe T.
PY  - 2017
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/1786
AB  - A process of obtaining N-doped TiO2 nanotubes sensitized by CdS nanoparticles is presented, including detailed characterizations performed along the synthesis. Transparent TiO2 films consisting of nanotubes, 2.5 mu m long and of similar to 60 nm inner diameter, were obtained after anodization of a titanium film deposited onto FTO glass substrate. N-doping was achieved by annealing of TiO2 film in ammonia. X-ray Photoelectron Spectroscopy measurements showed that nitrogen was substitutionally incorporated in the TiO2 matrix, with the N:Ti concentration ratio of 1:100. The doping changed the optical properties of the material in such a way that the absorption edge was shifted from 380 nm to 507 nm, as observed from diffuse reflectance spectra. The influence of the microwave (MW) irradiation on the synthesized CdS quantum dots and their optical properties was investigated. It was shown that the diameter of CdS nanoparticles was increased due to releasing of S-2-ions from dimethyl sulfoxide (DMSO) as a consequence of the MW treatment. The (N)TiO2 films were then used as substrates for matrix assisted pulsed laser deposition of the CdS quantum dots with DMSO as a matrix. The laser parameters for the deposition were optimized in order to preserve the nanotubular structure open, the latter being an important feature of this type of photoanode. The structure obtained under optimized conditions has an additional absorption edge shift, reaching 603 nm.
T2  - Ceramics International
T1  - Absorption boost of TiO2 nanotubes by doping with N and sensitization with CdS quantum dots
VL  - 43
IS  - 17
SP  - 15040
EP  - 15046
DO  - 10.1016/j.ceramint.2017.08.029
ER  - 
@article{
author = "Bjelajac, Anđelika and Đokić, Veljko R. and Petrovic, Rada and Bundaleski, Nenad and Socol, Gabriel and Mihailescu, Ion N. and Rakočević, Zlatko Lj. and Janaćković, Đorđe T.",
year = "2017",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/1786",
abstract = "A process of obtaining N-doped TiO2 nanotubes sensitized by CdS nanoparticles is presented, including detailed characterizations performed along the synthesis. Transparent TiO2 films consisting of nanotubes, 2.5 mu m long and of similar to 60 nm inner diameter, were obtained after anodization of a titanium film deposited onto FTO glass substrate. N-doping was achieved by annealing of TiO2 film in ammonia. X-ray Photoelectron Spectroscopy measurements showed that nitrogen was substitutionally incorporated in the TiO2 matrix, with the N:Ti concentration ratio of 1:100. The doping changed the optical properties of the material in such a way that the absorption edge was shifted from 380 nm to 507 nm, as observed from diffuse reflectance spectra. The influence of the microwave (MW) irradiation on the synthesized CdS quantum dots and their optical properties was investigated. It was shown that the diameter of CdS nanoparticles was increased due to releasing of S-2-ions from dimethyl sulfoxide (DMSO) as a consequence of the MW treatment. The (N)TiO2 films were then used as substrates for matrix assisted pulsed laser deposition of the CdS quantum dots with DMSO as a matrix. The laser parameters for the deposition were optimized in order to preserve the nanotubular structure open, the latter being an important feature of this type of photoanode. The structure obtained under optimized conditions has an additional absorption edge shift, reaching 603 nm.",
journal = "Ceramics International",
title = "Absorption boost of TiO2 nanotubes by doping with N and sensitization with CdS quantum dots",
volume = "43",
number = "17",
pages = "15040-15046",
doi = "10.1016/j.ceramint.2017.08.029"
}
Bjelajac, A., Đokić, V. R., Petrovic, R., Bundaleski, N., Socol, G., Mihailescu, I. N., Rakočević, Z. Lj.,& Janaćković, Đ. T. (2017). Absorption boost of TiO2 nanotubes by doping with N and sensitization with CdS quantum dots.
Ceramics International, 43(17), 15040-15046.
https://doi.org/10.1016/j.ceramint.2017.08.029
Bjelajac A, Đokić VR, Petrovic R, Bundaleski N, Socol G, Mihailescu IN, Rakočević ZL, Janaćković ĐT. Absorption boost of TiO2 nanotubes by doping with N and sensitization with CdS quantum dots. Ceramics International. 2017;43(17):15040-15046
Bjelajac Anđelika, Đokić Veljko R., Petrovic Rada, Bundaleski Nenad, Socol Gabriel, Mihailescu Ion N., Rakočević Zlatko Lj., Janaćković Đorđe T., "Absorption boost of TiO2 nanotubes by doping with N and sensitization with CdS quantum dots" 43, no. 17 (2017):15040-15046,
https://doi.org/10.1016/j.ceramint.2017.08.029 .
10
10
10

Synthesis and Characterization of Core-Shell Magnetic Mesoporous Silica and Organosilica Nanostructures

Knežević, Nikola; Jimenez, Chiara Mauriello; Albino, Martin; Vukadinović, Aleksandar; Mraković, Ana Đ.; Illés, Erzsébet; Janaćković, Đorđe T.; Durand, Jean-Olivier; Sangregorio, Claudio; Peddis, Davide

(2017)

TY  - JOUR
AU  - Knežević, Nikola
AU  - Jimenez, Chiara Mauriello
AU  - Albino, Martin
AU  - Vukadinović, Aleksandar
AU  - Mraković, Ana Đ.
AU  - Illés, Erzsébet
AU  - Janaćković, Đorđe T.
AU  - Durand, Jean-Olivier
AU  - Sangregorio, Claudio
AU  - Peddis, Davide
PY  - 2017
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/1775
AB  - Initial results en route toward construction of complex magnetic core-shell silica and organosilica nanotheranostics are presented. Magnetite nanoparticles are synthesized by three different methods and embedded within mesoporous silica and organosilica frameworks by different surfactant-templated procedures to produce three types of core-shell nanoparticles. Magnetite nanoparticles (15 nm in diameter) are embedded within mesoporous silica nanoparticles to produce cell-like material with predominantly one magnetite nuclei-resembling core per nanoparticle, with final particle diameter of ca. 150 nm, specific surface area of 573 m(2)/g and hexagonally structured tubular pores (2.6 nm predominant diameter), extended throughout the volume of nanoparticles. Two forms of spherical core-shell nanoparticles composed of magnetite cores embedded within mesoporous organosilica shells are also obtained by employing ethylene and ethane bridged organobisalkoxysilane precursors. The obtained nanomaterials are characterized by high surface area (978 and 820 m(2)/g), tubular pore morphology (2 and 2.8 nm predominant pore diameters), different diameters (386 and 100-200 nm), in case of ethylene- and ethane-composed organosilica shells, respectively. Different degree of agglomeration of magnetite nanoparticles was also observed in the obtained materials, and in the case of utilization of surfactant-pre-stabilized magnetite nanoparticles for the syntheses, their uniform and non-agglomerated distribution within the shells was noted.
T2  - MRS Advances
T1  - Synthesis and Characterization of Core-Shell Magnetic Mesoporous Silica and Organosilica Nanostructures
VL  - 2
IS  - 19-20
SP  - 1037
EP  - 1045
DO  - 10.1557/adv.2017.69
ER  - 
@article{
author = "Knežević, Nikola and Jimenez, Chiara Mauriello and Albino, Martin and Vukadinović, Aleksandar and Mraković, Ana Đ. and Illés, Erzsébet and Janaćković, Đorđe T. and Durand, Jean-Olivier and Sangregorio, Claudio and Peddis, Davide",
year = "2017",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/1775",
abstract = "Initial results en route toward construction of complex magnetic core-shell silica and organosilica nanotheranostics are presented. Magnetite nanoparticles are synthesized by three different methods and embedded within mesoporous silica and organosilica frameworks by different surfactant-templated procedures to produce three types of core-shell nanoparticles. Magnetite nanoparticles (15 nm in diameter) are embedded within mesoporous silica nanoparticles to produce cell-like material with predominantly one magnetite nuclei-resembling core per nanoparticle, with final particle diameter of ca. 150 nm, specific surface area of 573 m(2)/g and hexagonally structured tubular pores (2.6 nm predominant diameter), extended throughout the volume of nanoparticles. Two forms of spherical core-shell nanoparticles composed of magnetite cores embedded within mesoporous organosilica shells are also obtained by employing ethylene and ethane bridged organobisalkoxysilane precursors. The obtained nanomaterials are characterized by high surface area (978 and 820 m(2)/g), tubular pore morphology (2 and 2.8 nm predominant pore diameters), different diameters (386 and 100-200 nm), in case of ethylene- and ethane-composed organosilica shells, respectively. Different degree of agglomeration of magnetite nanoparticles was also observed in the obtained materials, and in the case of utilization of surfactant-pre-stabilized magnetite nanoparticles for the syntheses, their uniform and non-agglomerated distribution within the shells was noted.",
journal = "MRS Advances",
title = "Synthesis and Characterization of Core-Shell Magnetic Mesoporous Silica and Organosilica Nanostructures",
volume = "2",
number = "19-20",
pages = "1037-1045",
doi = "10.1557/adv.2017.69"
}
Knežević, N., Jimenez, C. M., Albino, M., Vukadinović, A., Mraković, A. Đ., Illés, E., Janaćković, Đ. T., Durand, J., Sangregorio, C.,& Peddis, D. (2017). Synthesis and Characterization of Core-Shell Magnetic Mesoporous Silica and Organosilica Nanostructures.
MRS Advances, 2(19-20), 1037-1045.
https://doi.org/10.1557/adv.2017.69
Knežević N, Jimenez CM, Albino M, Vukadinović A, Mraković AĐ, Illés E, Janaćković ĐT, Durand J, Sangregorio C, Peddis D. Synthesis and Characterization of Core-Shell Magnetic Mesoporous Silica and Organosilica Nanostructures. MRS Advances. 2017;2(19-20):1037-1045
Knežević Nikola, Jimenez Chiara Mauriello, Albino Martin, Vukadinović Aleksandar, Mraković Ana Đ., Illés Erzsébet, Janaćković Đorđe T., Durand Jean-Olivier, Sangregorio Claudio, Peddis Davide, "Synthesis and Characterization of Core-Shell Magnetic Mesoporous Silica and Organosilica Nanostructures" 2, no. 19-20 (2017):1037-1045,
https://doi.org/10.1557/adv.2017.69 .
1
17
16
15

Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents

Ahribesh, Aysha Ali; Lazarevic, Slavica; Jankovic-Castvan, Ivona; Jokić, Bojan M.; Spasojević, Vojislav; Radetic, Tamara; Janaćković, Đorđe T.; Petrovic, Rada

(2017)

TY  - JOUR
AU  - Ahribesh, Aysha Ali
AU  - Lazarevic, Slavica
AU  - Jankovic-Castvan, Ivona
AU  - Jokić, Bojan M.
AU  - Spasojević, Vojislav
AU  - Radetic, Tamara
AU  - Janaćković, Đorđe T.
AU  - Petrovic, Rada
PY  - 2017
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/1349
AB  - The magnetic nanocomposites (MNCs), used as adsorbents for Cd2+ ions, were prepared by a co-precipitation method using both the untreated natural (SEP) and the partially acid-activated (ASEP) sepiolites as supports for magnetite. The synthesis conditions differed as follows: NaOH or NH3 was added in the SEP or the ASEP suspension before or after the addition of Fe3 and Fe2+. The SEP-based MNCs prepared using NaOH had a lower magnetization, but higher adsorption capacities than the MNCs synthesized using NH3. The order of the mixing of the reagents had a small influence on the properties of SEP-based MNCs, especially when NaOH was used for the synthesis. Due to acidity of the surface functional groups of the ASEP, the magnetic composite could be synthesized only when NH3 was added in the suspension of ASEP having Fe3+ and Fe2+ ions. Despite of the worse dispersibility of the magnetic particles, the adsorption capacityof the ASEP-based composite was higher than of the MNC with SEP prepared by the same procedure. All the MNCs showed a superparamagnetic behavior at room temperature and the adsorption capacities were higher than of pure compounds. The adsorption of Cd2+ on the composites was best fitted with the Sips model, which suggested the chemisorption on the heterogeneous surface at energetically non-uniform sites until a monolayer was formed. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Powder Technology
T1  - Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents
VL  - 305
SP  - 260
EP  - 269
DO  - 10.1016/j.powtec.2016.09.086
ER  - 
@article{
author = "Ahribesh, Aysha Ali and Lazarevic, Slavica and Jankovic-Castvan, Ivona and Jokić, Bojan M. and Spasojević, Vojislav and Radetic, Tamara and Janaćković, Đorđe T. and Petrovic, Rada",
year = "2017",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/1349",
abstract = "The magnetic nanocomposites (MNCs), used as adsorbents for Cd2+ ions, were prepared by a co-precipitation method using both the untreated natural (SEP) and the partially acid-activated (ASEP) sepiolites as supports for magnetite. The synthesis conditions differed as follows: NaOH or NH3 was added in the SEP or the ASEP suspension before or after the addition of Fe3 and Fe2+. The SEP-based MNCs prepared using NaOH had a lower magnetization, but higher adsorption capacities than the MNCs synthesized using NH3. The order of the mixing of the reagents had a small influence on the properties of SEP-based MNCs, especially when NaOH was used for the synthesis. Due to acidity of the surface functional groups of the ASEP, the magnetic composite could be synthesized only when NH3 was added in the suspension of ASEP having Fe3+ and Fe2+ ions. Despite of the worse dispersibility of the magnetic particles, the adsorption capacityof the ASEP-based composite was higher than of the MNC with SEP prepared by the same procedure. All the MNCs showed a superparamagnetic behavior at room temperature and the adsorption capacities were higher than of pure compounds. The adsorption of Cd2+ on the composites was best fitted with the Sips model, which suggested the chemisorption on the heterogeneous surface at energetically non-uniform sites until a monolayer was formed. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Powder Technology",
title = "Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents",
volume = "305",
pages = "260-269",
doi = "10.1016/j.powtec.2016.09.086"
}
Ahribesh, A. A., Lazarevic, S., Jankovic-Castvan, I., Jokić, B. M., Spasojević, V., Radetic, T., Janaćković, Đ. T.,& Petrovic, R. (2017). Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents.
Powder Technology, 305, 260-269.
https://doi.org/10.1016/j.powtec.2016.09.086
Ahribesh AA, Lazarevic S, Jankovic-Castvan I, Jokić BM, Spasojević V, Radetic T, Janaćković ĐT, Petrovic R. Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents. Powder Technology. 2017;305:260-269
Ahribesh Aysha Ali, Lazarevic Slavica, Jankovic-Castvan Ivona, Jokić Bojan M., Spasojević Vojislav, Radetic Tamara, Janaćković Đorđe T., Petrovic Rada, "Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents" 305 (2017):260-269,
https://doi.org/10.1016/j.powtec.2016.09.086 .
14
14
16

Visible-light active mesoporous, nanocrystalline N,S-doped and co-doped titania photocatalysts synthesized by non-hydrolytic sol-gel route

Albrbar, Asma Juma; Đokić, Veljko R.; Bjelajac, Anđelika; Kovač, Janez; Ćirković, Jovana; Mitrić, Miodrag; Janaćković, Đorđe T.; Petrovic, Rada

(2016)

TY  - JOUR
AU  - Albrbar, Asma Juma
AU  - Đokić, Veljko R.
AU  - Bjelajac, Anđelika
AU  - Kovač, Janez
AU  - Ćirković, Jovana
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe T.
AU  - Petrovic, Rada
PY  - 2016
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/1261
AB  - Visible-light active mesoporous N,S-doped and co-doped anatase TiO2 powders were synthesized by non-hydrolytic sol-gel route, starting from TiCl4 and Ti((OPr)-Pr-i)(4) dissolved in cyclohexane or dimethyl sulfoxide, later used as a S-doping agent. After drying in an inert atmosphere, the gels were annealed at 500 degrees C for 3 h, in air or ammonia flow, later used for N-doping. The undoped titania powder, obtained by annealing in air of the cyclohexane-based gel, was also annealed in ammonia to deduce which method is more efficient for N-doping: gel or powder annealing. The post-annealing in air after annealing in ammonia was optimized to attain the best photocatalytic activity for dye degradation under simulated visible light. The size of anatase nanocrystals decreased by doping and the specific surface area of the powders increased. The XPS analysis confirmed a successful substitution of Ti4+ by S(4+) and/or S(6+), which caused a very small band-gap narrowing. The gel annealing in ammonia was much more efficient for interstitial nitrogen incorporation in TiO2 lattice than the powder annealing. The annealing in ammonia of the gel synthesized with dimethyl sulfoxide provided the highest visible-light activity owing to high specific surface area, appropriate mesoporosity and high photoabsorption due to efficient N,S co-doping. (C) 2016 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Visible-light active mesoporous, nanocrystalline N,S-doped and co-doped titania photocatalysts synthesized by non-hydrolytic sol-gel route
VL  - 42
IS  - 15
SP  - 16718
EP  - 16728
DO  - 10.1016/j.ceramint.2016.07.144
ER  - 
@article{
author = "Albrbar, Asma Juma and Đokić, Veljko R. and Bjelajac, Anđelika and Kovač, Janez and Ćirković, Jovana and Mitrić, Miodrag and Janaćković, Đorđe T. and Petrovic, Rada",
year = "2016",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/1261",
abstract = "Visible-light active mesoporous N,S-doped and co-doped anatase TiO2 powders were synthesized by non-hydrolytic sol-gel route, starting from TiCl4 and Ti((OPr)-Pr-i)(4) dissolved in cyclohexane or dimethyl sulfoxide, later used as a S-doping agent. After drying in an inert atmosphere, the gels were annealed at 500 degrees C for 3 h, in air or ammonia flow, later used for N-doping. The undoped titania powder, obtained by annealing in air of the cyclohexane-based gel, was also annealed in ammonia to deduce which method is more efficient for N-doping: gel or powder annealing. The post-annealing in air after annealing in ammonia was optimized to attain the best photocatalytic activity for dye degradation under simulated visible light. The size of anatase nanocrystals decreased by doping and the specific surface area of the powders increased. The XPS analysis confirmed a successful substitution of Ti4+ by S(4+) and/or S(6+), which caused a very small band-gap narrowing. The gel annealing in ammonia was much more efficient for interstitial nitrogen incorporation in TiO2 lattice than the powder annealing. The annealing in ammonia of the gel synthesized with dimethyl sulfoxide provided the highest visible-light activity owing to high specific surface area, appropriate mesoporosity and high photoabsorption due to efficient N,S co-doping. (C) 2016 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Visible-light active mesoporous, nanocrystalline N,S-doped and co-doped titania photocatalysts synthesized by non-hydrolytic sol-gel route",
volume = "42",
number = "15",
pages = "16718-16728",
doi = "10.1016/j.ceramint.2016.07.144"
}
Albrbar, A. J., Đokić, V. R., Bjelajac, A., Kovač, J., Ćirković, J., Mitrić, M., Janaćković, Đ. T.,& Petrovic, R. (2016). Visible-light active mesoporous, nanocrystalline N,S-doped and co-doped titania photocatalysts synthesized by non-hydrolytic sol-gel route.
Ceramics International, 42(15), 16718-16728.
https://doi.org/10.1016/j.ceramint.2016.07.144
Albrbar AJ, Đokić VR, Bjelajac A, Kovač J, Ćirković J, Mitrić M, Janaćković ĐT, Petrovic R. Visible-light active mesoporous, nanocrystalline N,S-doped and co-doped titania photocatalysts synthesized by non-hydrolytic sol-gel route. Ceramics International. 2016;42(15):16718-16728
Albrbar Asma Juma, Đokić Veljko R., Bjelajac Anđelika, Kovač Janez, Ćirković Jovana, Mitrić Miodrag, Janaćković Đorđe T., Petrovic Rada, "Visible-light active mesoporous, nanocrystalline N,S-doped and co-doped titania photocatalysts synthesized by non-hydrolytic sol-gel route" 42, no. 15 (2016):16718-16728,
https://doi.org/10.1016/j.ceramint.2016.07.144 .
19
19
19

Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process

Savić, Andrija B.; Čokeša, Đuro; Lazarevic, Slavica; Jokić, Bojan M.; Janaćković, Đorđe T.; Petrovic, Rada; Živković, Ljiljana

(2016)

TY  - JOUR
AU  - Savić, Andrija B.
AU  - Čokeša, Đuro
AU  - Lazarevic, Slavica
AU  - Jokić, Bojan M.
AU  - Janaćković, Đorđe T.
AU  - Petrovic, Rada
AU  - Živković, Ljiljana
PY  - 2016
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/1262
AB  - This study demonstrates that PEG-assisted hydrothermal synthesis provides a convenient and eco-friendly route to fabrication of mesoporous magnetite with enhanced capacity for phosphate removal, excellent potential for magnetic separation and good reusability. Adsorption of phosphate onto 4 laboratory prepared magnetite powders was investigated in a systematic manner. Powders were synthesized in poly(ethylene) glycol-free or assisted conditions (PEGs 400 and 20,000 at varied PEG/water ratio), and characterized in terms of crystalline structure, and magnetic, morphological, textural, and acid-base properties. PEG acted as a powerful pore forming agent, the PEG/water ratio being the key factor in developing the surface area and mesoporosity of magnetite. Uptake capacity for phosphates increased with an increase in surface area and pore volume. PEG 20,000 at a ratio of 3:1 gave the best result. This mesoporous (D-max = 11 nm), nano-scale ( LT 10 nm) magnetite was ca. 9 times more efficient than nonporous micrometric powder derived from PEG-free synthesis (Langmuir maximum capacity, q(m) = 26.2 vs. 3.0 mg g(-1)). The adsorption was pH-dependent, in accord with variations in zeta potential of magnetite. Opposite shifts of isoelectric point and point of zero charge confirmed specific adsorption of phosphates at water/magnetite interface which proceeded via replacement of surface hydroxyls and sulfates. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Powder Technology
T1  - Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process
VL  - 301
SP  - 511
EP  - 519
DO  - 10.1016/j.powtec.2016.06.028
ER  - 
@article{
author = "Savić, Andrija B. and Čokeša, Đuro and Lazarevic, Slavica and Jokić, Bojan M. and Janaćković, Đorđe T. and Petrovic, Rada and Živković, Ljiljana",
year = "2016",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/1262",
abstract = "This study demonstrates that PEG-assisted hydrothermal synthesis provides a convenient and eco-friendly route to fabrication of mesoporous magnetite with enhanced capacity for phosphate removal, excellent potential for magnetic separation and good reusability. Adsorption of phosphate onto 4 laboratory prepared magnetite powders was investigated in a systematic manner. Powders were synthesized in poly(ethylene) glycol-free or assisted conditions (PEGs 400 and 20,000 at varied PEG/water ratio), and characterized in terms of crystalline structure, and magnetic, morphological, textural, and acid-base properties. PEG acted as a powerful pore forming agent, the PEG/water ratio being the key factor in developing the surface area and mesoporosity of magnetite. Uptake capacity for phosphates increased with an increase in surface area and pore volume. PEG 20,000 at a ratio of 3:1 gave the best result. This mesoporous (D-max = 11 nm), nano-scale ( LT 10 nm) magnetite was ca. 9 times more efficient than nonporous micrometric powder derived from PEG-free synthesis (Langmuir maximum capacity, q(m) = 26.2 vs. 3.0 mg g(-1)). The adsorption was pH-dependent, in accord with variations in zeta potential of magnetite. Opposite shifts of isoelectric point and point of zero charge confirmed specific adsorption of phosphates at water/magnetite interface which proceeded via replacement of surface hydroxyls and sulfates. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Powder Technology",
title = "Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process",
volume = "301",
pages = "511-519",
doi = "10.1016/j.powtec.2016.06.028"
}
Savić, A. B., Čokeša, Đ., Lazarevic, S., Jokić, B. M., Janaćković, Đ. T., Petrovic, R.,& Živković, L. (2016). Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process.
Powder Technology, 301, 511-519.
https://doi.org/10.1016/j.powtec.2016.06.028
Savić AB, Čokeša Đ, Lazarevic S, Jokić BM, Janaćković ĐT, Petrovic R, Živković L. Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process. Powder Technology. 2016;301:511-519
Savić Andrija B., Čokeša Đuro, Lazarevic Slavica, Jokić Bojan M., Janaćković Đorđe T., Petrovic Rada, Živković Ljiljana, "Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process" 301 (2016):511-519,
https://doi.org/10.1016/j.powtec.2016.06.028 .
12
11
12

Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots

Bjelajac, Anđelika; Petrovic, Rada; Nedeljković, Jovan; Đokić, Veljko R.; Radetic, Tamara; Ćirković, Jovana; Janaćković, Đorđe T.

(2015)

TY  - JOUR
AU  - Bjelajac, Anđelika
AU  - Petrovic, Rada
AU  - Nedeljković, Jovan
AU  - Đokić, Veljko R.
AU  - Radetic, Tamara
AU  - Ćirković, Jovana
AU  - Janaćković, Đorđe T.
PY  - 2015
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/506
AB  - Ordered titania nanotubes (pore diameter approximate to 90 nm and wall thickness approximate to 10 nm) were obtained by the anodization technique and used for the ex-situ deposition of cadmium sulfide quantum dots (CdS QDs) via simple immersion of titania substrates in the CdS colloid. The colloidal dispersion of CdS nanoparticles in water was obtained in the presence of the bifunctional ligand, mercapto silane, which binds to the surface of CdS providing stability to the colloid and preventing further growth of the synthesized nanoparticles. The blue-shift of the optical absorption indicated that the CdS nanoparticles were of quantum dot size. Using the effective mass model, the average particle size was calculated to be 5.4 nm. Transmission electron microscopy provided the verification for the estimated size of the nanoparticles, which was followed by performing selected area electron diffraction to determine the mixed phase (cubic and hexagonal) of the synthesized CdS QDs. Scanning electron microscopy and reflectance spectroscopy were employed to characterize the nanostructures consisting of TiO2 nanotubes with different loadings of CdS QDs (after 24 h and 72 h immersion). It was demonstrated that mercapto silane efficiently binds CdS QDs onto TiO2 nanotubes enabling Visible-light response of the obtained nanocomposites. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots
VL  - 41
IS  - 5
SP  - 7048
EP  - 7053
DO  - 10.1016/j.ceramint.2015.02.010
ER  - 
@article{
author = "Bjelajac, Anđelika and Petrovic, Rada and Nedeljković, Jovan and Đokić, Veljko R. and Radetic, Tamara and Ćirković, Jovana and Janaćković, Đorđe T.",
year = "2015",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/506",
abstract = "Ordered titania nanotubes (pore diameter approximate to 90 nm and wall thickness approximate to 10 nm) were obtained by the anodization technique and used for the ex-situ deposition of cadmium sulfide quantum dots (CdS QDs) via simple immersion of titania substrates in the CdS colloid. The colloidal dispersion of CdS nanoparticles in water was obtained in the presence of the bifunctional ligand, mercapto silane, which binds to the surface of CdS providing stability to the colloid and preventing further growth of the synthesized nanoparticles. The blue-shift of the optical absorption indicated that the CdS nanoparticles were of quantum dot size. Using the effective mass model, the average particle size was calculated to be 5.4 nm. Transmission electron microscopy provided the verification for the estimated size of the nanoparticles, which was followed by performing selected area electron diffraction to determine the mixed phase (cubic and hexagonal) of the synthesized CdS QDs. Scanning electron microscopy and reflectance spectroscopy were employed to characterize the nanostructures consisting of TiO2 nanotubes with different loadings of CdS QDs (after 24 h and 72 h immersion). It was demonstrated that mercapto silane efficiently binds CdS QDs onto TiO2 nanotubes enabling Visible-light response of the obtained nanocomposites. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots",
volume = "41",
number = "5",
pages = "7048-7053",
doi = "10.1016/j.ceramint.2015.02.010"
}
Bjelajac, A., Petrovic, R., Nedeljković, J., Đokić, V. R., Radetic, T., Ćirković, J.,& Janaćković, Đ. T. (2015). Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots.
Ceramics International, 41(5), 7048-7053.
https://doi.org/10.1016/j.ceramint.2015.02.010
Bjelajac A, Petrovic R, Nedeljković J, Đokić VR, Radetic T, Ćirković J, Janaćković ĐT. Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots. Ceramics International. 2015;41(5):7048-7053
Bjelajac Anđelika, Petrovic Rada, Nedeljković Jovan, Đokić Veljko R., Radetic Tamara, Ćirković Jovana, Janaćković Đorđe T., "Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots" 41, no. 5 (2015):7048-7053,
https://doi.org/10.1016/j.ceramint.2015.02.010 .
5
5
5

Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization

Vujančević, Jelena; Đokić, Veljko R.; Bjelajac, Anđelika; Pavlović, Vera P.; Mitrić, Miodrag; Janaćković, Đorđe T.; Pavlović, Vladimir B.

(Belgrade : Institute of Technical Sciences of SASA, 2015)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Đokić, Veljko R.
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe T.
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/841
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/1121
UR  - http://www.itn.sanu.ac.rs/opus4/files/1121/Vujancevic-14YRC.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7545
AB  - Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia
T1  - Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization
SP  - 18
EP  - 18
ER  - 
@conference{
author = "Vujančević, Jelena and Đokić, Veljko R. and Bjelajac, Anđelika and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe T. and Pavlović, Vladimir B.",
year = "2015",
url = "http://dais.sanu.ac.rs/123456789/841, http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/1121, http://www.itn.sanu.ac.rs/opus4/files/1121/Vujancevic-14YRC.pdf, http://vinar.vin.bg.ac.rs/handle/123456789/7545",
abstract = "Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia",
title = "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization",
pages = "18-18"
}
Vujančević, J., Đokić, V. R., Bjelajac, A., Pavlović, V. P., Mitrić, M., Janaćković, Đ. T.,& Pavlović, V. B. (2015). Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization.
Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, SerbiaBelgrade : Institute of Technical Sciences of SASA., 18-18.
Vujančević J, Đokić VR, Bjelajac A, Pavlović VP, Mitrić M, Janaćković ĐT, Pavlović VB. Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia. 2015;:18-18
Vujančević Jelena, Đokić Veljko R., Bjelajac Anđelika, Pavlović Vera P., Mitrić Miodrag, Janaćković Đorđe T., Pavlović Vladimir B., "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization" (2015):18-18

Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures

Vujančević, Jelena; Bjelajac, Anđelika; Obradović, Nina; Pavlović, Vera P.; Mitrić, Miodrag; Janaćković, Đorđe T.; Rašić, Goran; Vlahović, Branislav; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2015)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Obradović, Nina
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe T.
AU  - Rašić, Goran
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/764
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/1038
UR  - http://www.itn.sanu.ac.rs/opus4/files/1038/Vujancevic-ACAIV.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7527
AB  - The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015
T1  - Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures
SP  - 81
EP  - 81
ER  - 
@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Obradović, Nina and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe T. and Rašić, Goran and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2015",
url = "http://dais.sanu.ac.rs/123456789/764, http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/1038, http://www.itn.sanu.ac.rs/opus4/files/1038/Vujancevic-ACAIV.pdf, http://vinar.vin.bg.ac.rs/handle/123456789/7527",
abstract = "The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015",
title = "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures",
pages = "81-81"
}
Vujančević, J., Bjelajac, A., Obradović, N., Pavlović, V. P., Mitrić, M., Janaćković, Đ. T., Rašić, G., Vlahović, B.,& Pavlović, V. B. (2015). Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures.
Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015Belgrade : Serbian Ceramic Society., 81-81.
Vujančević J, Bjelajac A, Obradović N, Pavlović VP, Mitrić M, Janaćković ĐT, Rašić G, Vlahović B, Pavlović VB. Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures. Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015. 2015;:81-81
Vujančević Jelena, Bjelajac Anđelika, Obradović Nina, Pavlović Vera P., Mitrić Miodrag, Janaćković Đorđe T., Rašić Goran, Vlahović Branislav, Pavlović Vladimir B., "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures" (2015):81-81

Polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics fabricated by Spark Plasma Sintering: Densification and microstructure development

Krsmanović, Radenka; Antić, Željka; Milićević, Bojana R.; Pošarac-Marković, Milica B.; Janaćković, Đorđe T.; Dramićanin, Miroslav; Brik, Mikhail G.; Steins, Ints; Veljović, Đorđe N.

(2014)

TY  - JOUR
AU  - Krsmanović, Radenka
AU  - Antić, Željka
AU  - Milićević, Bojana R.
AU  - Pošarac-Marković, Milica B.
AU  - Janaćković, Đorđe T.
AU  - Dramićanin, Miroslav
AU  - Brik, Mikhail G.
AU  - Steins, Ints
AU  - Veljović, Đorđe N.
PY  - 2014
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/5972
AB  - Using Spark Plasma Sintering it is possible to produce polycrystalline ceramics of very fine microstructure and good mechanical properties. This work presents the fabrication of such ceramics using Eu3+-doped (Y0.7Gd0.3)(2)O-3 nanopowder as a starting material. We monitored the changes in the morphology of ceramic samples and their consolidation with additional thermal treatments at 650 degrees C and 1100 degrees C. The ceramics grain size remained in the sub-micron domain, even when elevated temperatures were used for annealing. The best results were obtained for the sample sintered at 1100 degrees C for 20 min, which had the smallest grain size, theoretical density, and the most intensive photoluminescence, along with the maximum hardness and appropriate fracture toughness. The Judd-Ofelt intensity parameters and branching ratios were calculated, taking into account the difference in the effective refractive index for the nanopowder and ceramic samples. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics fabricated by Spark Plasma Sintering: Densification and microstructure development
VL  - 40
IS  - 6
SP  - 8853
EP  - 8862
DO  - 10.1016/j.ceramint.2014.01.108
ER  - 
@article{
author = "Krsmanović, Radenka and Antić, Željka and Milićević, Bojana R. and Pošarac-Marković, Milica B. and Janaćković, Đorđe T. and Dramićanin, Miroslav and Brik, Mikhail G. and Steins, Ints and Veljović, Đorđe N.",
year = "2014",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/5972",
abstract = "Using Spark Plasma Sintering it is possible to produce polycrystalline ceramics of very fine microstructure and good mechanical properties. This work presents the fabrication of such ceramics using Eu3+-doped (Y0.7Gd0.3)(2)O-3 nanopowder as a starting material. We monitored the changes in the morphology of ceramic samples and their consolidation with additional thermal treatments at 650 degrees C and 1100 degrees C. The ceramics grain size remained in the sub-micron domain, even when elevated temperatures were used for annealing. The best results were obtained for the sample sintered at 1100 degrees C for 20 min, which had the smallest grain size, theoretical density, and the most intensive photoluminescence, along with the maximum hardness and appropriate fracture toughness. The Judd-Ofelt intensity parameters and branching ratios were calculated, taking into account the difference in the effective refractive index for the nanopowder and ceramic samples. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics fabricated by Spark Plasma Sintering: Densification and microstructure development",
volume = "40",
number = "6",
pages = "8853-8862",
doi = "10.1016/j.ceramint.2014.01.108"
}
Krsmanović, R., Antić, Ž., Milićević, B. R., Pošarac-Marković, M. B., Janaćković, Đ. T., Dramićanin, M., Brik, M. G., Steins, I.,& Veljović, Đ. N. (2014). Polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics fabricated by Spark Plasma Sintering: Densification and microstructure development.
Ceramics International, 40(6), 8853-8862.
https://doi.org/10.1016/j.ceramint.2014.01.108
Krsmanović R, Antić Ž, Milićević BR, Pošarac-Marković MB, Janaćković ĐT, Dramićanin M, Brik MG, Steins I, Veljović ĐN. Polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics fabricated by Spark Plasma Sintering: Densification and microstructure development. Ceramics International. 2014;40(6):8853-8862
Krsmanović Radenka, Antić Željka, Milićević Bojana R., Pošarac-Marković Milica B., Janaćković Đorđe T., Dramićanin Miroslav, Brik Mikhail G., Steins Ints, Veljović Đorđe N., "Polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics fabricated by Spark Plasma Sintering: Densification and microstructure development" 40, no. 6 (2014):8853-8862,
https://doi.org/10.1016/j.ceramint.2014.01.108 .
11
10
10

Sol-gel synthesis and characterization of iron doped mullite

Ilić, Svetlana M.; Zec, Slavica; Miljkovic, M.; Poleti, D.; Pošarac-Marković, Milica B.; Janaćković, Đorđe T.; Matović, Branko

(2014)

TY  - JOUR
AU  - Ilić, Svetlana M.
AU  - Zec, Slavica
AU  - Miljkovic, M.
AU  - Poleti, D.
AU  - Pošarac-Marković, Milica B.
AU  - Janaćković, Đorđe T.
AU  - Matović, Branko
PY  - 2014
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/6089
AB  - Amorphous powders of iron doped 3:2 mullite (3Al(2)O(3)center dot 2SiO(2)) were prepared by sol-gel combustion process using ethanol-water solutions of Al(III) nitrate, Fe(III) nitrate, TEOS and urea. Compositions up to 15 wt% of Fe2O3 were investigated. After combustion and heat treatment at 800 degrees C for 4 h, XRD analysis confirmed that the powders were amorphous. This is in agreement with the thermodynamic predictions that direct formation of mullite has not occurred during the aluminum nitrate - urea combustion reaction. XRD patterns of uniaxially pressed and sintered pellets at 1550 degrees C for 4 h revealed the crystal structure of orthorhombic mullite. The lattice parameters and unit cell volume increases as the mullite solid solutions were enriched by iron. The TGA/DSC analysis showed the reducing of crystallization temperature of iron doped mullites with increasing of iron content in reaction mixtures. The mullitization reaction is two-step process including formation of transient spinel phase below 1000 degrees C and mullite crystallization at temperatures about 1200 degrees C. The SEM micrographs of the sintered samples reveal elongated mullite grains with grain length up to 40 mu m. Increasing of the iron content in the reaction mixture enhances the grain size and the grains become elongated and better packed increasing the density of sintered samples. (C) 2014 Elsevier B.V. All rights reserved.
T2  - Journal of Alloys and Compounds
T1  - Sol-gel synthesis and characterization of iron doped mullite
VL  - 612
SP  - 259
EP  - 264
DO  - 10.1016/j.jallcom.2014.05.204
ER  - 
@article{
author = "Ilić, Svetlana M. and Zec, Slavica and Miljkovic, M. and Poleti, D. and Pošarac-Marković, Milica B. and Janaćković, Đorđe T. and Matović, Branko",
year = "2014",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/6089",
abstract = "Amorphous powders of iron doped 3:2 mullite (3Al(2)O(3)center dot 2SiO(2)) were prepared by sol-gel combustion process using ethanol-water solutions of Al(III) nitrate, Fe(III) nitrate, TEOS and urea. Compositions up to 15 wt% of Fe2O3 were investigated. After combustion and heat treatment at 800 degrees C for 4 h, XRD analysis confirmed that the powders were amorphous. This is in agreement with the thermodynamic predictions that direct formation of mullite has not occurred during the aluminum nitrate - urea combustion reaction. XRD patterns of uniaxially pressed and sintered pellets at 1550 degrees C for 4 h revealed the crystal structure of orthorhombic mullite. The lattice parameters and unit cell volume increases as the mullite solid solutions were enriched by iron. The TGA/DSC analysis showed the reducing of crystallization temperature of iron doped mullites with increasing of iron content in reaction mixtures. The mullitization reaction is two-step process including formation of transient spinel phase below 1000 degrees C and mullite crystallization at temperatures about 1200 degrees C. The SEM micrographs of the sintered samples reveal elongated mullite grains with grain length up to 40 mu m. Increasing of the iron content in the reaction mixture enhances the grain size and the grains become elongated and better packed increasing the density of sintered samples. (C) 2014 Elsevier B.V. All rights reserved.",
journal = "Journal of Alloys and Compounds",
title = "Sol-gel synthesis and characterization of iron doped mullite",
volume = "612",
pages = "259-264",
doi = "10.1016/j.jallcom.2014.05.204"
}
Ilić, S. M., Zec, S., Miljkovic, M., Poleti, D., Pošarac-Marković, M. B., Janaćković, Đ. T.,& Matović, B. (2014). Sol-gel synthesis and characterization of iron doped mullite.
Journal of Alloys and Compounds, 612, 259-264.
https://doi.org/10.1016/j.jallcom.2014.05.204
Ilić SM, Zec S, Miljkovic M, Poleti D, Pošarac-Marković MB, Janaćković ĐT, Matović B. Sol-gel synthesis and characterization of iron doped mullite. Journal of Alloys and Compounds. 2014;612:259-264
Ilić Svetlana M., Zec Slavica, Miljkovic M., Poleti D., Pošarac-Marković Milica B., Janaćković Đorđe T., Matović Branko, "Sol-gel synthesis and characterization of iron doped mullite" 612 (2014):259-264,
https://doi.org/10.1016/j.jallcom.2014.05.204 .
13
11
13

Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition

Erakovic, Sanja; Jankovic, Ana; Veljović, Đorđe N.; Palcevskis, Eriks; Mitrić, Miodrag; Stevanovic, Tatjana; Janaćković, Đorđe T.; Miskovic-Stankovic, Vesna

(2013)

TY  - JOUR
AU  - Erakovic, Sanja
AU  - Jankovic, Ana
AU  - Veljović, Đorđe N.
AU  - Palcevskis, Eriks
AU  - Mitrić, Miodrag
AU  - Stevanovic, Tatjana
AU  - Janaćković, Đorđe T.
AU  - Miskovic-Stankovic, Vesna
PY  - 2013
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/5321
AB  - Hydroxyapatite is the most suitable biocompatible material for bone implant coatings. However, its brittleness is a major obstacle, and that is why, recently, research focused on creating composites with various biopolymers. In this study, hydroxyapatite coatings were modified with lignin in order to attain corrosion stability and surface porosity that enables osteogenesis. Incorporating silver, well known for its antimicrobial properties, seemed the best strategy for avoiding possible infections. The silver/hydroxyapatite (Ag/HAP) and silver/hydroxyapatite/lignin (Ag/HAP/Lig) coatings were cathaphoretically deposited on titanium from ethanol suspensions, sintered at 900 degrees C in Ar, and characterized by X-ray diffraction, scanning electron microscopy, field emission scanning electron microscopy, attenuated total reflection Fourier transform infrared, and X-ray photoelectron spectroscopy. The corrosion stability of electrodeposited coatings was evaluated in vitro in Kokubos simulated body fluid (SBF) at 37 degrees C using electrochemical impedance spectroscopy. Bioactivity was estimated by immersion in SBF to evaluate the formation of hydroxyapatite on the coating surface. A microcrystalline structure of newly formed plate-shaped carbonate-hydroxyapatite was detected after only 7 days, indicating enhanced bioactive behavior. Both coatings had good corrosion stability during a prolonged immersion time. Among the two, the Ag/HAP/Lig coating had a homogeneous surface, less roughness, and low values of contact angle.
T2  - Journal of Physical Chemistry. Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical
T1  - Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition
VL  - 117
IS  - 6
SP  - 1633
EP  - 1643
DO  - 10.1021/jp305252a
ER  - 
@article{
author = "Erakovic, Sanja and Jankovic, Ana and Veljović, Đorđe N. and Palcevskis, Eriks and Mitrić, Miodrag and Stevanovic, Tatjana and Janaćković, Đorđe T. and Miskovic-Stankovic, Vesna",
year = "2013",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/5321",
abstract = "Hydroxyapatite is the most suitable biocompatible material for bone implant coatings. However, its brittleness is a major obstacle, and that is why, recently, research focused on creating composites with various biopolymers. In this study, hydroxyapatite coatings were modified with lignin in order to attain corrosion stability and surface porosity that enables osteogenesis. Incorporating silver, well known for its antimicrobial properties, seemed the best strategy for avoiding possible infections. The silver/hydroxyapatite (Ag/HAP) and silver/hydroxyapatite/lignin (Ag/HAP/Lig) coatings were cathaphoretically deposited on titanium from ethanol suspensions, sintered at 900 degrees C in Ar, and characterized by X-ray diffraction, scanning electron microscopy, field emission scanning electron microscopy, attenuated total reflection Fourier transform infrared, and X-ray photoelectron spectroscopy. The corrosion stability of electrodeposited coatings was evaluated in vitro in Kokubos simulated body fluid (SBF) at 37 degrees C using electrochemical impedance spectroscopy. Bioactivity was estimated by immersion in SBF to evaluate the formation of hydroxyapatite on the coating surface. A microcrystalline structure of newly formed plate-shaped carbonate-hydroxyapatite was detected after only 7 days, indicating enhanced bioactive behavior. Both coatings had good corrosion stability during a prolonged immersion time. Among the two, the Ag/HAP/Lig coating had a homogeneous surface, less roughness, and low values of contact angle.",
journal = "Journal of Physical Chemistry. Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical",
title = "Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition",
volume = "117",
number = "6",
pages = "1633-1643",
doi = "10.1021/jp305252a"
}
Erakovic, S., Jankovic, A., Veljović, Đ. N., Palcevskis, E., Mitrić, M., Stevanovic, T., Janaćković, Đ. T.,& Miskovic-Stankovic, V. (2013). Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition.
Journal of Physical Chemistry. Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical, 117(6), 1633-1643.
https://doi.org/10.1021/jp305252a
Erakovic S, Jankovic A, Veljović ĐN, Palcevskis E, Mitrić M, Stevanovic T, Janaćković ĐT, Miskovic-Stankovic V. Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition. Journal of Physical Chemistry. Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical. 2013;117(6):1633-1643
Erakovic Sanja, Jankovic Ana, Veljović Đorđe N., Palcevskis Eriks, Mitrić Miodrag, Stevanovic Tatjana, Janaćković Đorđe T., Miskovic-Stankovic Vesna, "Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition" 117, no. 6 (2013):1633-1643,
https://doi.org/10.1021/jp305252a .
63
69
73

Preparation of TiO2/carbon nanotubes photocatalysts: The influence of the method of oxidation of the carbon nanotubes on the photocatalytic activity of the nanocomposites

Đokić, Veljko R.; Marinković, Aleksandar D.; Mitrić, Miodrag; Uskokovic, Petar S.; Petrovic, Rada D.; Radmilovic, Velimir R.; Janaćković, Đorđe T.

(2012)

TY  - JOUR
AU  - Đokić, Veljko R.
AU  - Marinković, Aleksandar D.
AU  - Mitrić, Miodrag
AU  - Uskokovic, Petar S.
AU  - Petrovic, Rada D.
AU  - Radmilovic, Velimir R.
AU  - Janaćković, Đorđe T.
PY  - 2012
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/5085
AB  - A method for the preparation of efficient TiO2/multi-wall carbon nanotubes nanocomposite photocatalysts by precipitation of anatase TiO2 nanoparticles onto differently oxidized carbon nanotubes is presented. The precursor compound titanium(IV) bromide was hydrolyzed producing pure anatase phase TiO2 nanoparticles decorated on the surface of the oxidized carbon nanotubes. The oxidative treatment of the carbon nanotubes influenced the type, quantity and distribution of oxygen-containing functional groups, which had a significant influence on the electron transfer properties, i.e., the photocatalytic activity of the synthesized nanocomposites. The results of C.I. Reactive Orange 16 photodegradation in the presence of all the synthesized nanocomposites showed their better photocatalytic activity in comparison to the commercial photocatalyst Degussa P-25. (C) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Preparation of TiO2/carbon nanotubes photocatalysts: The influence of the method of oxidation of the carbon nanotubes on the photocatalytic activity of the nanocomposites
VL  - 38
IS  - 8
SP  - 6123
EP  - 6129
DO  - 10.1016/j.ceramint.2012.04.060
ER  - 
@article{
author = "Đokić, Veljko R. and Marinković, Aleksandar D. and Mitrić, Miodrag and Uskokovic, Petar S. and Petrovic, Rada D. and Radmilovic, Velimir R. and Janaćković, Đorđe T.",
year = "2012",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/5085",
abstract = "A method for the preparation of efficient TiO2/multi-wall carbon nanotubes nanocomposite photocatalysts by precipitation of anatase TiO2 nanoparticles onto differently oxidized carbon nanotubes is presented. The precursor compound titanium(IV) bromide was hydrolyzed producing pure anatase phase TiO2 nanoparticles decorated on the surface of the oxidized carbon nanotubes. The oxidative treatment of the carbon nanotubes influenced the type, quantity and distribution of oxygen-containing functional groups, which had a significant influence on the electron transfer properties, i.e., the photocatalytic activity of the synthesized nanocomposites. The results of C.I. Reactive Orange 16 photodegradation in the presence of all the synthesized nanocomposites showed their better photocatalytic activity in comparison to the commercial photocatalyst Degussa P-25. (C) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Preparation of TiO2/carbon nanotubes photocatalysts: The influence of the method of oxidation of the carbon nanotubes on the photocatalytic activity of the nanocomposites",
volume = "38",
number = "8",
pages = "6123-6129",
doi = "10.1016/j.ceramint.2012.04.060"
}
Đokić, V. R., Marinković, A. D., Mitrić, M., Uskokovic, P. S., Petrovic, R. D., Radmilovic, V. R.,& Janaćković, Đ. T. (2012). Preparation of TiO2/carbon nanotubes photocatalysts: The influence of the method of oxidation of the carbon nanotubes on the photocatalytic activity of the nanocomposites.
Ceramics International, 38(8), 6123-6129.
https://doi.org/10.1016/j.ceramint.2012.04.060
Đokić VR, Marinković AD, Mitrić M, Uskokovic PS, Petrovic RD, Radmilovic VR, Janaćković ĐT. Preparation of TiO2/carbon nanotubes photocatalysts: The influence of the method of oxidation of the carbon nanotubes on the photocatalytic activity of the nanocomposites. Ceramics International. 2012;38(8):6123-6129
Đokić Veljko R., Marinković Aleksandar D., Mitrić Miodrag, Uskokovic Petar S., Petrovic Rada D., Radmilovic Velimir R., Janaćković Đorđe T., "Preparation of TiO2/carbon nanotubes photocatalysts: The influence of the method of oxidation of the carbon nanotubes on the photocatalytic activity of the nanocomposites" 38, no. 8 (2012):6123-6129,
https://doi.org/10.1016/j.ceramint.2012.04.060 .
15
18
19

A study of the photocatalytic degradation of the textile dye CI Basic Yellow 28 in water using a P160 TiO2-based catalyst

Đokić, Veljko R.; Vujovic, Jelena; Marinković, Aleksandar D.; Petrovic, Rada; Janaćković, Đorđe T.; Onjia, Antonije E.; Mijin, Dušan Ž.

(2012)

TY  - JOUR
AU  - Đokić, Veljko R.
AU  - Vujovic, Jelena
AU  - Marinković, Aleksandar D.
AU  - Petrovic, Rada
AU  - Janaćković, Đorđe T.
AU  - Onjia, Antonije E.
AU  - Mijin, Dušan Ž.
PY  - 2012
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/5281
AB  - The photocatalytic degradation of the synthetic textile dye CI Basic Yellow 28 (BY28) in water, using a recently synthesized P160 TiO2-based catalyst, under Osram ultra-vitalux (R) lamp (300 W) light, was studied. The effects of the operational parameters, such as initial concentration of catalyst, initial dye concentration and pH, were studied. The salt effect (NaCl, Na2CO3, Na2SO4 and NaNO3) was also investigated. It was found that the optimal concentration of catalyst is 2.0 g L-1. A pseudo first-order kinetic model was illustrated using the Langmuir-Hinshelwood mechanism and the adsorption equilibrium constant and the rate constant of the surface reaction were calculated (K-By = 6.126 L mg(-1) and k(C) = 0.272 mg L-1 min(-1), respectively). The photodegradation rate was higher in weak acidic than in high acidic and alkaline conditions. The presence of CO32- ions increased the photodegradation rate while Cl-, SO42- and NO3- decreased the reaction rate. The rate of photodegradation of BY28 was measured using UV-Vis spectroscopy.
T2  - Journal of the Serbian Chemical Society
T1  - A study of the photocatalytic degradation of the textile dye CI Basic Yellow 28 in water using a P160 TiO2-based catalyst
VL  - 77
IS  - 12
SP  - 1747
EP  - 1757
DO  - 10.2298/JSC121015130D
ER  - 
@article{
author = "Đokić, Veljko R. and Vujovic, Jelena and Marinković, Aleksandar D. and Petrovic, Rada and Janaćković, Đorđe T. and Onjia, Antonije E. and Mijin, Dušan Ž.",
year = "2012",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/5281",
abstract = "The photocatalytic degradation of the synthetic textile dye CI Basic Yellow 28 (BY28) in water, using a recently synthesized P160 TiO2-based catalyst, under Osram ultra-vitalux (R) lamp (300 W) light, was studied. The effects of the operational parameters, such as initial concentration of catalyst, initial dye concentration and pH, were studied. The salt effect (NaCl, Na2CO3, Na2SO4 and NaNO3) was also investigated. It was found that the optimal concentration of catalyst is 2.0 g L-1. A pseudo first-order kinetic model was illustrated using the Langmuir-Hinshelwood mechanism and the adsorption equilibrium constant and the rate constant of the surface reaction were calculated (K-By = 6.126 L mg(-1) and k(C) = 0.272 mg L-1 min(-1), respectively). The photodegradation rate was higher in weak acidic than in high acidic and alkaline conditions. The presence of CO32- ions increased the photodegradation rate while Cl-, SO42- and NO3- decreased the reaction rate. The rate of photodegradation of BY28 was measured using UV-Vis spectroscopy.",
journal = "Journal of the Serbian Chemical Society",
title = "A study of the photocatalytic degradation of the textile dye CI Basic Yellow 28 in water using a P160 TiO2-based catalyst",
volume = "77",
number = "12",
pages = "1747-1757",
doi = "10.2298/JSC121015130D"
}
Đokić, V. R., Vujovic, J., Marinković, A. D., Petrovic, R., Janaćković, Đ. T., Onjia, A. E.,& Mijin, D. Ž. (2012). A study of the photocatalytic degradation of the textile dye CI Basic Yellow 28 in water using a P160 TiO2-based catalyst.
Journal of the Serbian Chemical Society, 77(12), 1747-1757.
https://doi.org/10.2298/JSC121015130D
Đokić VR, Vujovic J, Marinković AD, Petrovic R, Janaćković ĐT, Onjia AE, Mijin DŽ. A study of the photocatalytic degradation of the textile dye CI Basic Yellow 28 in water using a P160 TiO2-based catalyst. Journal of the Serbian Chemical Society. 2012;77(12):1747-1757
Đokić Veljko R., Vujovic Jelena, Marinković Aleksandar D., Petrovic Rada, Janaćković Đorđe T., Onjia Antonije E., Mijin Dušan Ž., "A study of the photocatalytic degradation of the textile dye CI Basic Yellow 28 in water using a P160 TiO2-based catalyst" 77, no. 12 (2012):1747-1757,
https://doi.org/10.2298/JSC121015130D .
11
10
12

The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium

Erakovic, Sanja; Veljović, Đorđe N.; Diouf, Papa Niokhor; Stevanovic, Tatjana; Mitrić, Miodrag; Janaćković, Đorđe T.; Matić, Ivana Z.; Juranic, Zorica D.; Miskovic-Stankovic, Vesna

(2012)

TY  - JOUR
AU  - Erakovic, Sanja
AU  - Veljović, Đorđe N.
AU  - Diouf, Papa Niokhor
AU  - Stevanovic, Tatjana
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe T.
AU  - Matić, Ivana Z.
AU  - Juranic, Zorica D.
AU  - Miskovic-Stankovic, Vesna
PY  - 2012
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/5089
AB  - Composite coatings based on lignin, obtained by electrophoretic deposition (EPD) on titanium, were investigated. The aim of this work was to produce hydroxyapatite/lignin (HAP/Lig) coatings on titanium and to investigate the effect of the lignin concentration on microstructure, morphology, phase composition, thermal behavior and cytotoxicity of the HAP/Lig coatings. An organosolv lignin was used for the production of the composite coatings studied in this research. The properties of HAP/Lig coatings were characterized using X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FT-IR) and X-ray photoelectron spectroscopy (XPS), as well as the MTT test of cytotoxicity. The results showed that higher lignin concentrations protected the HAP lattice during sintering, thereby improving the stability of the HAP/Lig coatings. The cell survival of peripheral blood mononuclear cells (PBMC) after proliferation indicates that the HAP/Lig coating with 1 wt% Lig electrodeposited on titanium was non-toxic with significant promise as a potential bone-repair material. (C) 2012 Elsevier B.V. All rights reserved.
T2  - Progress in Organic Coatings
T1  - The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium
VL  - 75
IS  - 4
SP  - 275
EP  - 283
DO  - 10.1016/j.porgcoat.2012.07.005
ER  - 
@article{
author = "Erakovic, Sanja and Veljović, Đorđe N. and Diouf, Papa Niokhor and Stevanovic, Tatjana and Mitrić, Miodrag and Janaćković, Đorđe T. and Matić, Ivana Z. and Juranic, Zorica D. and Miskovic-Stankovic, Vesna",
year = "2012",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/5089",
abstract = "Composite coatings based on lignin, obtained by electrophoretic deposition (EPD) on titanium, were investigated. The aim of this work was to produce hydroxyapatite/lignin (HAP/Lig) coatings on titanium and to investigate the effect of the lignin concentration on microstructure, morphology, phase composition, thermal behavior and cytotoxicity of the HAP/Lig coatings. An organosolv lignin was used for the production of the composite coatings studied in this research. The properties of HAP/Lig coatings were characterized using X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FT-IR) and X-ray photoelectron spectroscopy (XPS), as well as the MTT test of cytotoxicity. The results showed that higher lignin concentrations protected the HAP lattice during sintering, thereby improving the stability of the HAP/Lig coatings. The cell survival of peripheral blood mononuclear cells (PBMC) after proliferation indicates that the HAP/Lig coating with 1 wt% Lig electrodeposited on titanium was non-toxic with significant promise as a potential bone-repair material. (C) 2012 Elsevier B.V. All rights reserved.",
journal = "Progress in Organic Coatings",
title = "The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium",
volume = "75",
number = "4",
pages = "275-283",
doi = "10.1016/j.porgcoat.2012.07.005"
}
Erakovic, S., Veljović, Đ. N., Diouf, P. N., Stevanovic, T., Mitrić, M., Janaćković, Đ. T., Matić, I. Z., Juranic, Z. D.,& Miskovic-Stankovic, V. (2012). The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium.
Progress in Organic Coatings, 75(4), 275-283.
https://doi.org/10.1016/j.porgcoat.2012.07.005
Erakovic S, Veljović ĐN, Diouf PN, Stevanovic T, Mitrić M, Janaćković ĐT, Matić IZ, Juranic ZD, Miskovic-Stankovic V. The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium. Progress in Organic Coatings. 2012;75(4):275-283
Erakovic Sanja, Veljović Đorđe N., Diouf Papa Niokhor, Stevanovic Tatjana, Mitrić Miodrag, Janaćković Đorđe T., Matić Ivana Z., Juranic Zorica D., Miskovic-Stankovic Vesna, "The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium" 75, no. 4 (2012):275-283,
https://doi.org/10.1016/j.porgcoat.2012.07.005 .
19
24
25

Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method

Jokić, Bojan M.; Mitrić, Miodrag; Radmilovic, Velimir; Drmanic, Sasa; Petrovic, Rada; Janaćković, Đorđe T.

(2011)

TY  - JOUR
AU  - Jokić, Bojan M.
AU  - Mitrić, Miodrag
AU  - Radmilovic, Velimir
AU  - Drmanic, Sasa
AU  - Petrovic, Rada
AU  - Janaćković, Đorđe T.
PY  - 2011
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/4187
AB  - High temperature hydrothermal syntheses, using calcium nitrate tetrahydrate, sodium dihydrogen phosphate and urea as precursors, and characterization of hydroxyapatite (HAp) whiskers are reported herein. The morphology and chemical composition of the crystals from a monetite to a hydroxyapatite phase were controlled by varying the starting concentrations of the precursors and the solution pH through the amount of urea that is decomposed during heating. X-ray diffraction (XRD) analysis, infrared spectroscopy (IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) were used to investigate the products of the syntheses in order to find the optimum reaction conditions for obtaining the desired morphology and phase composition. Different morphologies ranging from single crystals of monetite through rods and plates of hydroxyapatite with different size distribution to whisker-like single hydroxyapatite crystal were achieved by simply varying the starting concentration of urea. Structural refinement of the hydroxyapatite whiskers confirmed a strong preferential orientation along the c-axis direction of the hexagonal crystal structure, which was significantly different from the usually observed random crystal orientation. TEM and SEM analysis of the apatite whiskers confirmed single crystal structure with the a c-axis orientation parallel to the long axis of the whiskers, with sizes up to 150 mu m in length, 10 mu m in width and with a thickness of about 300 nm, that grew from the same centre of nucleation, forming flaky-like particles. (C) 2010 Elsevier Ltd and Techna Group Sri. All rights reserved.
T2  - Ceramics International
T1  - Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method
VL  - 37
IS  - 1
SP  - 167
EP  - 173
DO  - 10.1016/j.ceramint.2010.08.032
ER  - 
@article{
author = "Jokić, Bojan M. and Mitrić, Miodrag and Radmilovic, Velimir and Drmanic, Sasa and Petrovic, Rada and Janaćković, Đorđe T.",
year = "2011",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/4187",
abstract = "High temperature hydrothermal syntheses, using calcium nitrate tetrahydrate, sodium dihydrogen phosphate and urea as precursors, and characterization of hydroxyapatite (HAp) whiskers are reported herein. The morphology and chemical composition of the crystals from a monetite to a hydroxyapatite phase were controlled by varying the starting concentrations of the precursors and the solution pH through the amount of urea that is decomposed during heating. X-ray diffraction (XRD) analysis, infrared spectroscopy (IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) were used to investigate the products of the syntheses in order to find the optimum reaction conditions for obtaining the desired morphology and phase composition. Different morphologies ranging from single crystals of monetite through rods and plates of hydroxyapatite with different size distribution to whisker-like single hydroxyapatite crystal were achieved by simply varying the starting concentration of urea. Structural refinement of the hydroxyapatite whiskers confirmed a strong preferential orientation along the c-axis direction of the hexagonal crystal structure, which was significantly different from the usually observed random crystal orientation. TEM and SEM analysis of the apatite whiskers confirmed single crystal structure with the a c-axis orientation parallel to the long axis of the whiskers, with sizes up to 150 mu m in length, 10 mu m in width and with a thickness of about 300 nm, that grew from the same centre of nucleation, forming flaky-like particles. (C) 2010 Elsevier Ltd and Techna Group Sri. All rights reserved.",
journal = "Ceramics International",
title = "Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method",
volume = "37",
number = "1",
pages = "167-173",
doi = "10.1016/j.ceramint.2010.08.032"
}
Jokić, B. M., Mitrić, M., Radmilovic, V., Drmanic, S., Petrovic, R.,& Janaćković, Đ. T. (2011). Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method.
Ceramics International, 37(1), 167-173.
https://doi.org/10.1016/j.ceramint.2010.08.032
Jokić BM, Mitrić M, Radmilovic V, Drmanic S, Petrovic R, Janaćković ĐT. Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method. Ceramics International. 2011;37(1):167-173
Jokić Bojan M., Mitrić Miodrag, Radmilovic Velimir, Drmanic Sasa, Petrovic Rada, Janaćković Đorđe T., "Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method" 37, no. 1 (2011):167-173,
https://doi.org/10.1016/j.ceramint.2010.08.032 .
81
77
90

Synthesis of antimicrobial monophase silver-doped hydroxyapatite nanopowders for bone tissue engineering

Stanić, Vojislav; Janaćković, Đorđe T.; Dimitrijević, Suzana I.; Tanaskovic, Sladjana B.; Mitrić, Miodrag; Pavlović, Mirjana S.; Krstic, Aleksandra; Jovanovic, Dragoljub; Raičević, Slavica

(2011)

TY  - JOUR
AU  - Stanić, Vojislav
AU  - Janaćković, Đorđe T.
AU  - Dimitrijević, Suzana I.
AU  - Tanaskovic, Sladjana B.
AU  - Mitrić, Miodrag
AU  - Pavlović, Mirjana S.
AU  - Krstic, Aleksandra
AU  - Jovanovic, Dragoljub
AU  - Raičević, Slavica
PY  - 2011
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/4194
AB  - Monophase silver-doped hydroxyapatite (AgxCa10-x(PO4)(6)(OH)(2); 0.002 LT = x LT = 0.04) nanoparticles were prepared using a neutralization method and investigated with respect to potential medical applications. This method consists of dissolving Ag2O in solution of H3PO4, and the slow addition to suspension of Ca(OH)(2) was applied for the purpose of homogenous distribution of silver ions. Characterization studies from XRD, TEM and FTIR spectra showed that obtained crystals are monophase hydroxyapatites and that particles of all samples are of nano size, with average length of 70nm and about 15-25nm in diameter. Antimicrobial studies have demonstrated that all silver-doped hydroxyapatite samples exhibit excellent antimicrobial activity in vitro against the following pathogens: Staphylococcus aureus, Escherichia coli and Candida albicans. The hydroxyapatite sample with the highest content of silver has shown the highest antimicrobial activity; killed all cells of E. coli and brought to more than 99% reduction in viable counts of S. aureus and C. albicans. The atomic force microscopic studies illustrate that silver-doped hydroxyapatite sample causes considerable morphological changes of microorganism cells which might be the cause of cells death. Hemolysis ratios of the silver-doped hydroxyapatite samples were below 3%, indicating good blood compatibility and that are promising as biomaterials. Crown Copyright (C) 2010 Published by Elsevier B. V. All rights reserved.
T2  - Applied Surface Science
T1  - Synthesis of antimicrobial monophase silver-doped hydroxyapatite nanopowders for bone tissue engineering
VL  - 257
IS  - 9
SP  - 4510
EP  - 4518
DO  - 10.1016/j.apsusc.2010.12.113
ER  - 
@article{
author = "Stanić, Vojislav and Janaćković, Đorđe T. and Dimitrijević, Suzana I. and Tanaskovic, Sladjana B. and Mitrić, Miodrag and Pavlović, Mirjana S. and Krstic, Aleksandra and Jovanovic, Dragoljub and Raičević, Slavica",
year = "2011",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/4194",
abstract = "Monophase silver-doped hydroxyapatite (AgxCa10-x(PO4)(6)(OH)(2); 0.002 LT = x LT = 0.04) nanoparticles were prepared using a neutralization method and investigated with respect to potential medical applications. This method consists of dissolving Ag2O in solution of H3PO4, and the slow addition to suspension of Ca(OH)(2) was applied for the purpose of homogenous distribution of silver ions. Characterization studies from XRD, TEM and FTIR spectra showed that obtained crystals are monophase hydroxyapatites and that particles of all samples are of nano size, with average length of 70nm and about 15-25nm in diameter. Antimicrobial studies have demonstrated that all silver-doped hydroxyapatite samples exhibit excellent antimicrobial activity in vitro against the following pathogens: Staphylococcus aureus, Escherichia coli and Candida albicans. The hydroxyapatite sample with the highest content of silver has shown the highest antimicrobial activity; killed all cells of E. coli and brought to more than 99% reduction in viable counts of S. aureus and C. albicans. The atomic force microscopic studies illustrate that silver-doped hydroxyapatite sample causes considerable morphological changes of microorganism cells which might be the cause of cells death. Hemolysis ratios of the silver-doped hydroxyapatite samples were below 3%, indicating good blood compatibility and that are promising as biomaterials. Crown Copyright (C) 2010 Published by Elsevier B. V. All rights reserved.",
journal = "Applied Surface Science",
title = "Synthesis of antimicrobial monophase silver-doped hydroxyapatite nanopowders for bone tissue engineering",
volume = "257",
number = "9",
pages = "4510-4518",
doi = "10.1016/j.apsusc.2010.12.113"
}
Stanić, V., Janaćković, Đ. T., Dimitrijević, S. I., Tanaskovic, S. B., Mitrić, M., Pavlović, M. S., Krstic, A., Jovanovic, D.,& Raičević, S. (2011). Synthesis of antimicrobial monophase silver-doped hydroxyapatite nanopowders for bone tissue engineering.
Applied Surface Science, 257(9), 4510-4518.
https://doi.org/10.1016/j.apsusc.2010.12.113
Stanić V, Janaćković ĐT, Dimitrijević SI, Tanaskovic SB, Mitrić M, Pavlović MS, Krstic A, Jovanovic D, Raičević S. Synthesis of antimicrobial monophase silver-doped hydroxyapatite nanopowders for bone tissue engineering. Applied Surface Science. 2011;257(9):4510-4518
Stanić Vojislav, Janaćković Đorđe T., Dimitrijević Suzana I., Tanaskovic Sladjana B., Mitrić Miodrag, Pavlović Mirjana S., Krstic Aleksandra, Jovanovic Dragoljub, Raičević Slavica, "Synthesis of antimicrobial monophase silver-doped hydroxyapatite nanopowders for bone tissue engineering" 257, no. 9 (2011):4510-4518,
https://doi.org/10.1016/j.apsusc.2010.12.113 .
3
165
165
177

Surface Characterization of Iron-Modified Sepiolite by Inverse Gas Chromatography

Lazarevic, Slavica; Jankovic-Castvan, Ivona; Onjia, Antonije E.; Krstić, Jugoslav B.; Janaćković, Đorđe T.; Petrovic, Rada

(2011)

TY  - JOUR
AU  - Lazarevic, Slavica
AU  - Jankovic-Castvan, Ivona
AU  - Onjia, Antonije E.
AU  - Krstić, Jugoslav B.
AU  - Janaćković, Đorđe T.
AU  - Petrovic, Rada
PY  - 2011
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/4517
AB  - Inverse gas chromatography at infinite and finite surface coverages was applied to evaluate the surface properties of an iron-modified sepiolite sorbent, Fe-sepiolite. The adsorptions of different nonpolar and polar probes were measured in the infinite-dilution regime, in the temperature range 483-513 K. For the organic probes used, the thermodynamic parameters (free energy, enthalpy, and entropy) of adsorption and the dispersive and specific components of the free energy of adsorption were determined and are discussed in terms of specific reactions that can occur on the adsorbent surface. Following the approach of Gutmann (The Donor Acceptor Approach to Molecular Interactions; Plenum Press: New York, 1978), acid/base surface characteristics were determined. The adsorption isotherms of n-hexane, benzene, chloroform, and tetrahydrofuran were used to estimate the specific surface areas, isosteric heats of adsorption, and adsorption energy distributions for the adsorption of organic molecules.
T2  - Industrial and Engineering Chemistry Research
T1  - Surface Characterization of Iron-Modified Sepiolite by Inverse Gas Chromatography
VL  - 50
IS  - 20
SP  - 11467
EP  - 11475
DO  - 10.1021/ie200595n
ER  - 
@article{
author = "Lazarevic, Slavica and Jankovic-Castvan, Ivona and Onjia, Antonije E. and Krstić, Jugoslav B. and Janaćković, Đorđe T. and Petrovic, Rada",
year = "2011",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/4517",
abstract = "Inverse gas chromatography at infinite and finite surface coverages was applied to evaluate the surface properties of an iron-modified sepiolite sorbent, Fe-sepiolite. The adsorptions of different nonpolar and polar probes were measured in the infinite-dilution regime, in the temperature range 483-513 K. For the organic probes used, the thermodynamic parameters (free energy, enthalpy, and entropy) of adsorption and the dispersive and specific components of the free energy of adsorption were determined and are discussed in terms of specific reactions that can occur on the adsorbent surface. Following the approach of Gutmann (The Donor Acceptor Approach to Molecular Interactions; Plenum Press: New York, 1978), acid/base surface characteristics were determined. The adsorption isotherms of n-hexane, benzene, chloroform, and tetrahydrofuran were used to estimate the specific surface areas, isosteric heats of adsorption, and adsorption energy distributions for the adsorption of organic molecules.",
journal = "Industrial and Engineering Chemistry Research",
title = "Surface Characterization of Iron-Modified Sepiolite by Inverse Gas Chromatography",
volume = "50",
number = "20",
pages = "11467-11475",
doi = "10.1021/ie200595n"
}
Lazarevic, S., Jankovic-Castvan, I., Onjia, A. E., Krstić, J. B., Janaćković, Đ. T.,& Petrovic, R. (2011). Surface Characterization of Iron-Modified Sepiolite by Inverse Gas Chromatography.
Industrial and Engineering Chemistry Research, 50(20), 11467-11475.
https://doi.org/10.1021/ie200595n
Lazarevic S, Jankovic-Castvan I, Onjia AE, Krstić JB, Janaćković ĐT, Petrovic R. Surface Characterization of Iron-Modified Sepiolite by Inverse Gas Chromatography. Industrial and Engineering Chemistry Research. 2011;50(20):11467-11475
Lazarevic Slavica, Jankovic-Castvan Ivona, Onjia Antonije E., Krstić Jugoslav B., Janaćković Đorđe T., Petrovic Rada, "Surface Characterization of Iron-Modified Sepiolite by Inverse Gas Chromatography" 50, no. 20 (2011):11467-11475,
https://doi.org/10.1021/ie200595n .
6
8
8

The influence of silicon substitution on the properties of spherical- and whisker-like biphasic alpha-calcium-phosphate/hydroxyapatite particles

Jokić, Bojan M.; Mitrić, Miodrag; Popović, Maja; Sima, L.; Petrescu, S. M.; Petrovic, R.; Janaćković, Đorđe T.

(2011)

TY  - JOUR
AU  - Jokić, Bojan M.
AU  - Mitrić, Miodrag
AU  - Popović, Maja
AU  - Sima, L.
AU  - Petrescu, S. M.
AU  - Petrovic, R.
AU  - Janaćković, Đorđe T.
PY  - 2011
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/4518
AB  - In this work, the influence of the morphology of hydroxyapatite particles on silicon substitution through hydrothermal synthesis performed under the same conditions was investigated. Spherical- and whisker-like hydroxyapatite particles were obtained starting from calcium-nitrate, sodium dihydrogen phosphate, disodium-ethylenediaminetetraacetic acid and urea (used only for the synthesis of whisker-like particles) dissolved in aqueous solutions. Silicon was introduced into the solution using tetraethylorthosilicate. X-ray diffraction, infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy and transmission electron microscopy indicate that silicon doping induce different phase compositions and bioactivity of spherical- and whisker-like hydroxyapatite particles obtained under the same hydrothermal conditions. Silicon-substituted, spherical hydroxyapatites particles showed greater phase transformation to silicon-substituted alpha- calcium-phosphate compared with whiskers-like hydroxyapatite particles synthesized with the same amount of added silicon. Metabolic activity assay performed with SaOs2 osteosarcoma cells showed better biocompatibility of annealed biphasic spherical-like particles compared with annealed whiskerlike particles while dried spherical-like particles induce high cytotoxicity effect.
T2  - Journal of Materials Science: Materials in Medicine
T1  - The influence of silicon substitution on the properties of spherical- and whisker-like biphasic alpha-calcium-phosphate/hydroxyapatite particles
VL  - 22
IS  - 10
SP  - 2175
EP  - 2185
DO  - 10.1007/s10856-011-4412-6
ER  - 
@article{
author = "Jokić, Bojan M. and Mitrić, Miodrag and Popović, Maja and Sima, L. and Petrescu, S. M. and Petrovic, R. and Janaćković, Đorđe T.",
year = "2011",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/4518",
abstract = "In this work, the influence of the morphology of hydroxyapatite particles on silicon substitution through hydrothermal synthesis performed under the same conditions was investigated. Spherical- and whisker-like hydroxyapatite particles were obtained starting from calcium-nitrate, sodium dihydrogen phosphate, disodium-ethylenediaminetetraacetic acid and urea (used only for the synthesis of whisker-like particles) dissolved in aqueous solutions. Silicon was introduced into the solution using tetraethylorthosilicate. X-ray diffraction, infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy and transmission electron microscopy indicate that silicon doping induce different phase compositions and bioactivity of spherical- and whisker-like hydroxyapatite particles obtained under the same hydrothermal conditions. Silicon-substituted, spherical hydroxyapatites particles showed greater phase transformation to silicon-substituted alpha- calcium-phosphate compared with whiskers-like hydroxyapatite particles synthesized with the same amount of added silicon. Metabolic activity assay performed with SaOs2 osteosarcoma cells showed better biocompatibility of annealed biphasic spherical-like particles compared with annealed whiskerlike particles while dried spherical-like particles induce high cytotoxicity effect.",
journal = "Journal of Materials Science: Materials in Medicine",
title = "The influence of silicon substitution on the properties of spherical- and whisker-like biphasic alpha-calcium-phosphate/hydroxyapatite particles",
volume = "22",
number = "10",
pages = "2175-2185",
doi = "10.1007/s10856-011-4412-6"
}
Jokić, B. M., Mitrić, M., Popović, M., Sima, L., Petrescu, S. M., Petrovic, R.,& Janaćković, Đ. T. (2011). The influence of silicon substitution on the properties of spherical- and whisker-like biphasic alpha-calcium-phosphate/hydroxyapatite particles.
Journal of Materials Science: Materials in Medicine, 22(10), 2175-2185.
https://doi.org/10.1007/s10856-011-4412-6
Jokić BM, Mitrić M, Popović M, Sima L, Petrescu SM, Petrovic R, Janaćković ĐT. The influence of silicon substitution on the properties of spherical- and whisker-like biphasic alpha-calcium-phosphate/hydroxyapatite particles. Journal of Materials Science: Materials in Medicine. 2011;22(10):2175-2185
Jokić Bojan M., Mitrić Miodrag, Popović Maja, Sima L., Petrescu S. M., Petrovic R., Janaćković Đorđe T., "The influence of silicon substitution on the properties of spherical- and whisker-like biphasic alpha-calcium-phosphate/hydroxyapatite particles" 22, no. 10 (2011):2175-2185,
https://doi.org/10.1007/s10856-011-4412-6 .
9
9
11

Biomaterijali

Balać, Igor; Bugarski, Branko; Ćosić, Irena; Dramićanin, Miroslav; Đorđević, Drago; Filipović, Nenad D.; Ignjatović, Nenad L.; Janaćković, Đorđe T.; Kojić, Miloš; Manojlović, Verica; Marković, Zoran M.; Obradović, Bojana; Pajić-Lijaković, Ivana; Pavlović, Miodrag; Plavšić, Milenko; Raković, Dejan; Ranković, Vladimir; Stojanović, Boban; Trajković, Vladimir S.; Uskoković, Dragan; Uskoković, Petar; Veljković, Dejan; Vlastelica, Ivo; Vunjak Novaković, Gordana

(Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala, 2010)

TY  - BOOK
AU  - Balać, Igor
AU  - Bugarski, Branko
AU  - Ćosić, Irena
AU  - Dramićanin, Miroslav
AU  - Đorđević, Drago
AU  - Filipović, Nenad D.
AU  - Ignjatović, Nenad L.
AU  - Janaćković, Đorđe T.
AU  - Kojić, Miloš
AU  - Manojlović, Verica
AU  - Marković, Zoran M.
AU  - Obradović, Bojana
AU  - Pajić-Lijaković, Ivana
AU  - Pavlović, Miodrag
AU  - Plavšić, Milenko
AU  - Raković, Dejan
AU  - Ranković, Vladimir
AU  - Stojanović, Boban
AU  - Trajković, Vladimir S.
AU  - Uskoković, Dragan
AU  - Uskoković, Petar
AU  - Veljković, Dejan
AU  - Vlastelica, Ivo
AU  - Vunjak Novaković, Gordana
PY  - 2010
UR  - http://dais.sanu.ac.rs/123456789/121
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/353
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7344
AB  - Početak XXI veka nesumnjivo je obeležen interdisciplinarnim i multidisciplinarnim naporima istraživača u različitim oblastima nauke. Jedna od najizrazitijih tendencija ovog tipa uočava se u biomedicinskim istraživanjima, gde se združuju napori lekara, biologa, genetičara i biohemičara, s jedne strane, i biofizičara i inženjera, s druge strane – sa ciljem dubljeg razumevanja zdravlja i bolesti, i primene ovih saznanja u biomedicinskoj praksi, tako važnoj u svakodnevnom životu ljudi.Kao rezultat ovih svetskih trendova, u Srbiji već više godina na nekoliko fakulteta postoji nastava iz oblasti biomedicinskog inženjerstva, sa ciljem da osposobi inženjere ovih usmerenja za multidisciplinarno povezivanje znanja iz oblasti tehnike sa biomedicinskim znanjima. Jedan od bazičnih predmeta ovih usmerenja jesu Biomaterijali, kojima je i posvećen naš udžbenik, čiji je cilj da predstavi pregled teorije i prakse biomaterijala u biomedicinskoj nauci.Nauka o biomaterijalima je nesumnjivo najmultidisciplinarnija od svih nauka, jer zahteva ovladavanje znanjima iz mnogih oblasti nauke i tehnologije, inženjerstva i medicine, kako bi naučnici iz oblasti biomaterijala mogli da se uhvate u koštac sa ovom profesijom. Zato posle uvodnog dela, udžbenik iz Biomaterijala sadrži četiri celine: (I) Osnovni biomedicinski koncepti i reakcije organizma na biomaterijale, (II) Struktura, fizičko-mehanička karakterizacija i modeliranje biomaterijala i tkiva, (III) Savremeni biomaterijali i tehnologije, (IV) Perspektive biomaterijala i tehnologija, iza kojih slede Zadaci sa rešenjima, Ispitna test pitanja i Ispitna teorijska pitanja, koji pomažu studentima da lakše savladaju veoma obimno i kompleksno gradivo. Na kraju svakog poglavlja data su pitanja za rekapitulaciju, kao i spisak dopunske literature za opcionu detaljniju obradu pojedinih oblasti.Grupa od dvadeset četiri profesionalca sa univerziteta i naučnih instituta, pod okriljem Instituta tehničkih nauka Srpske akademije nauka i umetnosti, Beograd, i Društva za istraživanje materijala Srbije (MRS Srbija) doprinela je pisanju ovog kapitalnog udžbenika o biomaterijalima, prvog do sada na srpskom jeziku. Mada uključivanje veće grupe autora nužno dovodi do stilske neujednačenosti, ipak je oblast biomaterijala toliko multidisciplinarna da je ovakav pristup bio neophodan, kako uostalom pokazuju slična svetska iskustva sa uključivanjem i preko pedeset autora. Ipak urednici su se potrudili da koliko je to moguće stilski i pedagoški ujednače udžbenik, kako bi bio korisna literatura za sve studente diplomskih, master i doktorskih studija iz biomedicinskog inženjerstva u Srbiji i okruženju.
PB  - Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala
T1  - Biomaterijali
ER  - 
@book{
author = "Balać, Igor and Bugarski, Branko and Ćosić, Irena and Dramićanin, Miroslav and Đorđević, Drago and Filipović, Nenad D. and Ignjatović, Nenad L. and Janaćković, Đorđe T. and Kojić, Miloš and Manojlović, Verica and Marković, Zoran M. and Obradović, Bojana and Pajić-Lijaković, Ivana and Pavlović, Miodrag and Plavšić, Milenko and Raković, Dejan and Ranković, Vladimir and Stojanović, Boban and Trajković, Vladimir S. and Uskoković, Dragan and Uskoković, Petar and Veljković, Dejan and Vlastelica, Ivo and Vunjak Novaković, Gordana",
year = "2010",
url = "http://dais.sanu.ac.rs/123456789/121, http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/353, http://vinar.vin.bg.ac.rs/handle/123456789/7344",
abstract = "Početak XXI veka nesumnjivo je obeležen interdisciplinarnim i multidisciplinarnim naporima istraživača u različitim oblastima nauke. Jedna od najizrazitijih tendencija ovog tipa uočava se u biomedicinskim istraživanjima, gde se združuju napori lekara, biologa, genetičara i biohemičara, s jedne strane, i biofizičara i inženjera, s druge strane – sa ciljem dubljeg razumevanja zdravlja i bolesti, i primene ovih saznanja u biomedicinskoj praksi, tako važnoj u svakodnevnom životu ljudi.Kao rezultat ovih svetskih trendova, u Srbiji već više godina na nekoliko fakulteta postoji nastava iz oblasti biomedicinskog inženjerstva, sa ciljem da osposobi inženjere ovih usmerenja za multidisciplinarno povezivanje znanja iz oblasti tehnike sa biomedicinskim znanjima. Jedan od bazičnih predmeta ovih usmerenja jesu Biomaterijali, kojima je i posvećen naš udžbenik, čiji je cilj da predstavi pregled teorije i prakse biomaterijala u biomedicinskoj nauci.Nauka o biomaterijalima je nesumnjivo najmultidisciplinarnija od svih nauka, jer zahteva ovladavanje znanjima iz mnogih oblasti nauke i tehnologije, inženjerstva i medicine, kako bi naučnici iz oblasti biomaterijala mogli da se uhvate u koštac sa ovom profesijom. Zato posle uvodnog dela, udžbenik iz Biomaterijala sadrži četiri celine: (I) Osnovni biomedicinski koncepti i reakcije organizma na biomaterijale, (II) Struktura, fizičko-mehanička karakterizacija i modeliranje biomaterijala i tkiva, (III) Savremeni biomaterijali i tehnologije, (IV) Perspektive biomaterijala i tehnologija, iza kojih slede Zadaci sa rešenjima, Ispitna test pitanja i Ispitna teorijska pitanja, koji pomažu studentima da lakše savladaju veoma obimno i kompleksno gradivo. Na kraju svakog poglavlja data su pitanja za rekapitulaciju, kao i spisak dopunske literature za opcionu detaljniju obradu pojedinih oblasti.Grupa od dvadeset četiri profesionalca sa univerziteta i naučnih instituta, pod okriljem Instituta tehničkih nauka Srpske akademije nauka i umetnosti, Beograd, i Društva za istraživanje materijala Srbije (MRS Srbija) doprinela je pisanju ovog kapitalnog udžbenika o biomaterijalima, prvog do sada na srpskom jeziku. Mada uključivanje veće grupe autora nužno dovodi do stilske neujednačenosti, ipak je oblast biomaterijala toliko multidisciplinarna da je ovakav pristup bio neophodan, kako uostalom pokazuju slična svetska iskustva sa uključivanjem i preko pedeset autora. Ipak urednici su se potrudili da koliko je to moguće stilski i pedagoški ujednače udžbenik, kako bi bio korisna literatura za sve studente diplomskih, master i doktorskih studija iz biomedicinskog inženjerstva u Srbiji i okruženju.",
publisher = "Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala",
title = "Biomaterijali"
}
Balać, I., Bugarski, B., Ćosić, I., Dramićanin, M., Đorđević, D., Filipović, N. D., Ignjatović, N. L., Janaćković, Đ. T., Kojić, M., Manojlović, V., Marković, Z. M., Obradović, B., Pajić-Lijaković, I., Pavlović, M., Plavšić, M., Raković, D., Ranković, V., Stojanović, B., Trajković, V. S., Uskoković, D., Uskoković, P., Veljković, D., Vlastelica, I.,& Vunjak Novaković, G. (2010). Biomaterijali.
Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala..
Balać I, Bugarski B, Ćosić I, Dramićanin M, Đorđević D, Filipović ND, Ignjatović NL, Janaćković ĐT, Kojić M, Manojlović V, Marković ZM, Obradović B, Pajić-Lijaković I, Pavlović M, Plavšić M, Raković D, Ranković V, Stojanović B, Trajković VS, Uskoković D, Uskoković P, Veljković D, Vlastelica I, Vunjak Novaković G. Biomaterijali. 2010;
Balać Igor, Bugarski Branko, Ćosić Irena, Dramićanin Miroslav, Đorđević Drago, Filipović Nenad D., Ignjatović Nenad L., Janaćković Đorđe T., Kojić Miloš, Manojlović Verica, Marković Zoran M., Obradović Bojana, Pajić-Lijaković Ivana, Pavlović Miodrag, Plavšić Milenko, Raković Dejan, Ranković Vladimir, Stojanović Boban, Trajković Vladimir S., Uskoković Dragan, Uskoković Petar, Veljković Dejan, Vlastelica Ivo, Vunjak Novaković Gordana, "Biomaterijali" (2010)