Miljković, Miroslav

Link to this page

Authority KeyName Variants
9cf4f12e-56f1-414d-8b20-f4e7dc18ea6c
  • Miljković, Miroslav (11)
Projects

Author's Bibliography

Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies

Stojanović, Zoran S.; Ignjatović, Nenad L.; Wu, Victoria; Žunič, Vojka; Veselinović, Ljiljana M.; Škapin, Srečo Davor; Miljković, Miroslav; Uskoković, Vuk; Uskoković, Dragan

(Elsevier, 2016)

TY  - JOUR
AU  - Stojanović, Zoran S.
AU  - Ignjatović, Nenad L.
AU  - Wu, Victoria
AU  - Žunič, Vojka
AU  - Veselinović, Ljiljana M.
AU  - Škapin, Srečo Davor
AU  - Miljković, Miroslav
AU  - Uskoković, Vuk
AU  - Uskoković, Dragan
PY  - 2016
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7576
AB  - Recent developments in bone tissue engineering have led to an increased interest in one-dimensional (1D) hydroxyapatite (HA) nano- and micro-structures such as wires, ribbons and tubes. They have been proposed for use as cell substrates, reinforcing phases in composites and carriers for biologically active substances. Here we demonstrate the synthesis of 1D HA structures using an optimized, urea-assisted, high-yield hydrothermal batch process. The one-pot process, yielding HA structures composed of bundles of ribbons and wires, was typified by the simultaneous occurrence of a multitude of intermediate reactions, failing to meet the uniformity criteria over particle morphology and size. To overcome these issues, the preparation procedure was divided to two stages: dicalcium phosphate platelets synthesized in the first step were used as a precursor for the synthesis of 1D HA in the second stage. Despite the elongated particle morphologies, both the precursor and the final product exhibited excellent biocompatibility and caused no reduction of viability when tested against osteoblastic MC3T3-E1 cells in 2D culture up to the concentration of 2.6 mg/cm2. X-ray powder diffraction combined with a range of electron microscopies and laser diffraction analyses was used to elucidate the formation mechanism and the microstructure of the final particles. The two-step synthesis involved a more direct transformation of DCP to 1D HA with the average diameter of 37 nm and the aspect ratio exceeding 100:1. The comparison of crystalline domain sizes along different crystallographic directions showed no signs of significant anisotropy, while indicating that individual nanowires are ordered in bundles in the b crystallographic direction of the P63/m space group of HA. Intermediate processes, e.g., dehydration of dicalcium phosphate, are critical for the formation of 1D HA alongside other key aspects of this phase transformation, it must be investigated in more detail in the continuous design of smart HA micro- and nano-structures with advanced therapeutic potentials.
PB  - Elsevier
T2  - Materials Science and Engineering: C
T1  - Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies
VL  - 68
SP  - 746
EP  - 757
DO  - 10.1016/j.msec.2016.06.047
ER  - 
@article{
author = "Stojanović, Zoran S. and Ignjatović, Nenad L. and Wu, Victoria and Žunič, Vojka and Veselinović, Ljiljana M. and Škapin, Srečo Davor and Miljković, Miroslav and Uskoković, Vuk and Uskoković, Dragan",
year = "2016",
abstract = "Recent developments in bone tissue engineering have led to an increased interest in one-dimensional (1D) hydroxyapatite (HA) nano- and micro-structures such as wires, ribbons and tubes. They have been proposed for use as cell substrates, reinforcing phases in composites and carriers for biologically active substances. Here we demonstrate the synthesis of 1D HA structures using an optimized, urea-assisted, high-yield hydrothermal batch process. The one-pot process, yielding HA structures composed of bundles of ribbons and wires, was typified by the simultaneous occurrence of a multitude of intermediate reactions, failing to meet the uniformity criteria over particle morphology and size. To overcome these issues, the preparation procedure was divided to two stages: dicalcium phosphate platelets synthesized in the first step were used as a precursor for the synthesis of 1D HA in the second stage. Despite the elongated particle morphologies, both the precursor and the final product exhibited excellent biocompatibility and caused no reduction of viability when tested against osteoblastic MC3T3-E1 cells in 2D culture up to the concentration of 2.6 mg/cm2. X-ray powder diffraction combined with a range of electron microscopies and laser diffraction analyses was used to elucidate the formation mechanism and the microstructure of the final particles. The two-step synthesis involved a more direct transformation of DCP to 1D HA with the average diameter of 37 nm and the aspect ratio exceeding 100:1. The comparison of crystalline domain sizes along different crystallographic directions showed no signs of significant anisotropy, while indicating that individual nanowires are ordered in bundles in the b crystallographic direction of the P63/m space group of HA. Intermediate processes, e.g., dehydration of dicalcium phosphate, are critical for the formation of 1D HA alongside other key aspects of this phase transformation, it must be investigated in more detail in the continuous design of smart HA micro- and nano-structures with advanced therapeutic potentials.",
publisher = "Elsevier",
journal = "Materials Science and Engineering: C",
title = "Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies",
volume = "68",
pages = "746-757",
doi = "10.1016/j.msec.2016.06.047"
}
Stojanović, Z. S., Ignjatović, N. L., Wu, V., Žunič, V., Veselinović, L. M., Škapin, S. D., Miljković, M., Uskoković, V.,& Uskoković, D.. (2016). Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies. in Materials Science and Engineering: C
Elsevier., 68, 746-757.
https://doi.org/10.1016/j.msec.2016.06.047
Stojanović ZS, Ignjatović NL, Wu V, Žunič V, Veselinović LM, Škapin SD, Miljković M, Uskoković V, Uskoković D. Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies. in Materials Science and Engineering: C. 2016;68:746-757.
doi:10.1016/j.msec.2016.06.047 .
Stojanović, Zoran S., Ignjatović, Nenad L., Wu, Victoria, Žunič, Vojka, Veselinović, Ljiljana M., Škapin, Srečo Davor, Miljković, Miroslav, Uskoković, Vuk, Uskoković, Dragan, "Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies" in Materials Science and Engineering: C, 68 (2016):746-757,
https://doi.org/10.1016/j.msec.2016.06.047 . .
25
24
26

Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies

Stojanović, Zoran S.; Ignjatović, Nenad L.; Wu, Victoria; Žunič, Vojka; Veselinović, Ljiljana M.; Škapin, Srečo Davor; Miljković, Miroslav; Uskoković, Vuk; Uskoković, Dragan

(2016)

TY  - JOUR
AU  - Stojanović, Zoran S.
AU  - Ignjatović, Nenad L.
AU  - Wu, Victoria
AU  - Žunič, Vojka
AU  - Veselinović, Ljiljana M.
AU  - Škapin, Srečo Davor
AU  - Miljković, Miroslav
AU  - Uskoković, Vuk
AU  - Uskoković, Dragan
PY  - 2016
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7575
AB  - Recent developments in bone tissue engineering have led to an increased interest in one-dimensional (1D) hydroxyapatite (HA) nano- and micro-structures such as wires, ribbons and tubes. They have been proposed for use as cell substrates, reinforcing phases in composites and carriers for biologically active substances. Here we demonstrate the synthesis of 1D HA structures using an optimized, urea-assisted, high-yield hydrothermal batch process. The one-pot process, yielding HA structures composed of bundles of ribbons and wires, was typified by the simultaneous occurrence of a multitude of intermediate reactions, failing to meet the uniformity criteria over particle morphology and size. To overcome these issues, the preparation procedure was divided to two stages: dicalcium phosphate platelets synthesized in the first step were used as a precursor for the synthesis of 1D HA in the second stage. Despite the elongated particle morphologies, both the precursor and the final product exhibited excellent biocompatibility and caused no reduction of viability when tested against osteoblastic MC3T3-E1 cells in 2D culture up to the concentration of 2.6 mg/cm2. X-ray powder diffraction combined with a range of electron microscopies and laser diffraction analyses was used to elucidate the formation mechanism and the microstructure of the final particles. The two-step synthesis involved a more direct transformation of DCP to 1D HA with the average diameter of 37 nm and the aspect ratio exceeding 100:1. The comparison of crystalline domain sizes along different crystallographic directions showed no signs of significant anisotropy, while indicating that individual nanowires are ordered in bundles in the b crystallographic direction of the P63/m space group of HA. Intermediate processes, e.g., dehydration of dicalcium phosphate, are critical for the formation of 1D HA alongside other key aspects of this phase transformation, it must be investigated in more detail in the continuous design of smart HA micro- and nano-structures with advanced therapeutic potentials.
T2  - Materials Science and Engineering: C
T1  - Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies
VL  - 68
SP  - 746
EP  - 757
DO  - 10.1016/j.msec.2016.06.047
ER  - 
@article{
author = "Stojanović, Zoran S. and Ignjatović, Nenad L. and Wu, Victoria and Žunič, Vojka and Veselinović, Ljiljana M. and Škapin, Srečo Davor and Miljković, Miroslav and Uskoković, Vuk and Uskoković, Dragan",
year = "2016",
abstract = "Recent developments in bone tissue engineering have led to an increased interest in one-dimensional (1D) hydroxyapatite (HA) nano- and micro-structures such as wires, ribbons and tubes. They have been proposed for use as cell substrates, reinforcing phases in composites and carriers for biologically active substances. Here we demonstrate the synthesis of 1D HA structures using an optimized, urea-assisted, high-yield hydrothermal batch process. The one-pot process, yielding HA structures composed of bundles of ribbons and wires, was typified by the simultaneous occurrence of a multitude of intermediate reactions, failing to meet the uniformity criteria over particle morphology and size. To overcome these issues, the preparation procedure was divided to two stages: dicalcium phosphate platelets synthesized in the first step were used as a precursor for the synthesis of 1D HA in the second stage. Despite the elongated particle morphologies, both the precursor and the final product exhibited excellent biocompatibility and caused no reduction of viability when tested against osteoblastic MC3T3-E1 cells in 2D culture up to the concentration of 2.6 mg/cm2. X-ray powder diffraction combined with a range of electron microscopies and laser diffraction analyses was used to elucidate the formation mechanism and the microstructure of the final particles. The two-step synthesis involved a more direct transformation of DCP to 1D HA with the average diameter of 37 nm and the aspect ratio exceeding 100:1. The comparison of crystalline domain sizes along different crystallographic directions showed no signs of significant anisotropy, while indicating that individual nanowires are ordered in bundles in the b crystallographic direction of the P63/m space group of HA. Intermediate processes, e.g., dehydration of dicalcium phosphate, are critical for the formation of 1D HA alongside other key aspects of this phase transformation, it must be investigated in more detail in the continuous design of smart HA micro- and nano-structures with advanced therapeutic potentials.",
journal = "Materials Science and Engineering: C",
title = "Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies",
volume = "68",
pages = "746-757",
doi = "10.1016/j.msec.2016.06.047"
}
Stojanović, Z. S., Ignjatović, N. L., Wu, V., Žunič, V., Veselinović, L. M., Škapin, S. D., Miljković, M., Uskoković, V.,& Uskoković, D.. (2016). Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies. in Materials Science and Engineering: C, 68, 746-757.
https://doi.org/10.1016/j.msec.2016.06.047
Stojanović ZS, Ignjatović NL, Wu V, Žunič V, Veselinović LM, Škapin SD, Miljković M, Uskoković V, Uskoković D. Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies. in Materials Science and Engineering: C. 2016;68:746-757.
doi:10.1016/j.msec.2016.06.047 .
Stojanović, Zoran S., Ignjatović, Nenad L., Wu, Victoria, Žunič, Vojka, Veselinović, Ljiljana M., Škapin, Srečo Davor, Miljković, Miroslav, Uskoković, Vuk, Uskoković, Dragan, "Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies" in Materials Science and Engineering: C, 68 (2016):746-757,
https://doi.org/10.1016/j.msec.2016.06.047 . .
25
24
26

Scanning electron microscopy analysis of changes of hydroxiapatite/poly-l-lactide with different molecular weight of PLLA after intraperitoneal implantation

Đorđević, Ljubiša; Najman, Stevo; Vasiljević, Perica; Miljković, Miroslav; Ignjatović, Nenad L.; Uskoković, Dragan; Plavšić, Milenko

(2016)

TY  - JOUR
AU  - Đorđević, Ljubiša
AU  - Najman, Stevo
AU  - Vasiljević, Perica
AU  - Miljković, Miroslav
AU  - Ignjatović, Nenad L.
AU  - Uskoković, Dragan
AU  - Plavšić, Milenko
PY  - 2016
UR  - http://itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/1234
UR  - http://itn.sanu.ac.rs/opus4/files/1234/Dordevi%C4%87_2016_Acta-Veterinaria_66_234.pdf
UR  - http://dais.sanu.ac.rs/123456789/15457
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7561
AB  - Implantation of a biomaterial is one of the important trends in solving the problem of bone tissue loss. Calcium hydroxiapatite (HAp), as the most representative bone component is a serious candidate for such implantations. The synthetic polymer poly-L-lactide (PLLA) in HAp/PLLA is often used as a polymeric material, with a role in the substitution of bone tissue collagen fibers. Fibers of PLLA may strengthen HAp and its good bioresorption provides space for tissue remodeling. Differences in porosity, microstructure, compressive consistency as well as bioresorbility of HAp/PLLA may be achieved by using PLLA with different molecular weights. In this study HAp/PLLA composites with PLLA of different molecular weights (50,000; 160,000 and 430,000) were implanted in mouse peritoneum in order to examine the influence of the molecular weight of PLLA on morphology changes. Microstructural changes of biomaterial (HAp/PLLA) surface were analyzed one week, three weeks and four months after their implantation using Scanning Electron Microscopy. The results showed a significant difference in tissue reactions on the applied biocomposites, depending on their molecular weight. The most intense proliferation of cells was induced by HAp/PLLA 50,000 compared to HAp/PLLA 430,000 and HAp/PLLA 160,000. In the vicinity of HAp/PLLA 430,000 abundant erythrocytes were observed. The differences in biological reactions on the examined biocomposites are significant for their practical applications. HAp/PLLA composite biomaterials of different types and resorption rates require specific designing and programming to become suitable for particular purposes in an organism.
T2  - Acta Veterinaria
T1  - Scanning electron microscopy analysis of changes of hydroxiapatite/poly-l-lactide with different molecular weight of PLLA after intraperitoneal implantation
VL  - 66
IS  - 2
SP  - 234
EP  - 244
DO  - 10.1515/acve-2016-0020
ER  - 
@article{
author = "Đorđević, Ljubiša and Najman, Stevo and Vasiljević, Perica and Miljković, Miroslav and Ignjatović, Nenad L. and Uskoković, Dragan and Plavšić, Milenko",
year = "2016",
abstract = "Implantation of a biomaterial is one of the important trends in solving the problem of bone tissue loss. Calcium hydroxiapatite (HAp), as the most representative bone component is a serious candidate for such implantations. The synthetic polymer poly-L-lactide (PLLA) in HAp/PLLA is often used as a polymeric material, with a role in the substitution of bone tissue collagen fibers. Fibers of PLLA may strengthen HAp and its good bioresorption provides space for tissue remodeling. Differences in porosity, microstructure, compressive consistency as well as bioresorbility of HAp/PLLA may be achieved by using PLLA with different molecular weights. In this study HAp/PLLA composites with PLLA of different molecular weights (50,000; 160,000 and 430,000) were implanted in mouse peritoneum in order to examine the influence of the molecular weight of PLLA on morphology changes. Microstructural changes of biomaterial (HAp/PLLA) surface were analyzed one week, three weeks and four months after their implantation using Scanning Electron Microscopy. The results showed a significant difference in tissue reactions on the applied biocomposites, depending on their molecular weight. The most intense proliferation of cells was induced by HAp/PLLA 50,000 compared to HAp/PLLA 430,000 and HAp/PLLA 160,000. In the vicinity of HAp/PLLA 430,000 abundant erythrocytes were observed. The differences in biological reactions on the examined biocomposites are significant for their practical applications. HAp/PLLA composite biomaterials of different types and resorption rates require specific designing and programming to become suitable for particular purposes in an organism.",
journal = "Acta Veterinaria",
title = "Scanning electron microscopy analysis of changes of hydroxiapatite/poly-l-lactide with different molecular weight of PLLA after intraperitoneal implantation",
volume = "66",
number = "2",
pages = "234-244",
doi = "10.1515/acve-2016-0020"
}
Đorđević, L., Najman, S., Vasiljević, P., Miljković, M., Ignjatović, N. L., Uskoković, D.,& Plavšić, M.. (2016). Scanning electron microscopy analysis of changes of hydroxiapatite/poly-l-lactide with different molecular weight of PLLA after intraperitoneal implantation. in Acta Veterinaria, 66(2), 234-244.
https://doi.org/10.1515/acve-2016-0020
Đorđević L, Najman S, Vasiljević P, Miljković M, Ignjatović NL, Uskoković D, Plavšić M. Scanning electron microscopy analysis of changes of hydroxiapatite/poly-l-lactide with different molecular weight of PLLA after intraperitoneal implantation. in Acta Veterinaria. 2016;66(2):234-244.
doi:10.1515/acve-2016-0020 .
Đorđević, Ljubiša, Najman, Stevo, Vasiljević, Perica, Miljković, Miroslav, Ignjatović, Nenad L., Uskoković, Dragan, Plavšić, Milenko, "Scanning electron microscopy analysis of changes of hydroxiapatite/poly-l-lactide with different molecular weight of PLLA after intraperitoneal implantation" in Acta Veterinaria, 66, no. 2 (2016):234-244,
https://doi.org/10.1515/acve-2016-0020 . .

The Hydrothermal Synthesis of 1D Biomedical Hydroxyapatite Nanostructures

Stojanović, Zoran S.; Veselinović, Ljiljana M.; Ignjatović, Nenad L.; Miljković, Miroslav; Uskoković, Dragan

(2014)

TY  - CONF
AU  - Stojanović, Zoran S.
AU  - Veselinović, Ljiljana M.
AU  - Ignjatović, Nenad L.
AU  - Miljković, Miroslav
AU  - Uskoković, Dragan
PY  - 2014
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/844
UR  - http://dais.sanu.ac.rs/123456789/576
UR  - http://www.itn.sanu.ac.rs/opus4/files/844/Stojanovic_Yucoma2014_poster.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7482
AB  - Poster presented at the 16th Annual Conference of the Materials Research Society of Serbia - YUCOMAT 2014, Herceg Novi, Montenegro, September 1–5, 2014
T1  - The Hydrothermal Synthesis of 1D Biomedical Hydroxyapatite Nanostructures
ER  - 
@conference{
author = "Stojanović, Zoran S. and Veselinović, Ljiljana M. and Ignjatović, Nenad L. and Miljković, Miroslav and Uskoković, Dragan",
year = "2014",
abstract = "Poster presented at the 16th Annual Conference of the Materials Research Society of Serbia - YUCOMAT 2014, Herceg Novi, Montenegro, September 1–5, 2014",
title = "The Hydrothermal Synthesis of 1D Biomedical Hydroxyapatite Nanostructures"
}
Stojanović, Z. S., Veselinović, L. M., Ignjatović, N. L., Miljković, M.,& Uskoković, D.. (2014). The Hydrothermal Synthesis of 1D Biomedical Hydroxyapatite Nanostructures. .
Stojanović ZS, Veselinović LM, Ignjatović NL, Miljković M, Uskoković D. The Hydrothermal Synthesis of 1D Biomedical Hydroxyapatite Nanostructures. 2014;..
Stojanović, Zoran S., Veselinović, Ljiljana M., Ignjatović, Nenad L., Miljković, Miroslav, Uskoković, Dragan, "The Hydrothermal Synthesis of 1D Biomedical Hydroxyapatite Nanostructures" (2014).

The hydrothermal synthesis of 1d biomedical hydroxyapatite nanostructures

Stojanović, Zoran S.; Veselinović, Ljiljana M.; Ignjatović, Nenad L.; Miljković, Miroslav; Uskoković, Dragan

(Belgrade : Materials Research Society of Serbia, 2014)

TY  - CONF
AU  - Stojanović, Zoran S.
AU  - Veselinović, Ljiljana M.
AU  - Ignjatović, Nenad L.
AU  - Miljković, Miroslav
AU  - Uskoković, Dragan
PY  - 2014
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/849
UR  - http://dais.sanu.ac.rs/123456789/581
UR  - http://www.itn.sanu.ac.rs/opus4/files/849/Stojanovic_YUCOMAT2014.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7484
AB  - 1D hydroxyapatite nanostructures such as nanotubes, ultra long nanowires and other morphological varieties have been promising material for bone reconstruction and therapy. Advantages like high specific surface, packing properties and mechanical properties make those nanostructures excellent candidates for scaffolds. This work is focused on soft hydrothermal routes for preparing different 1D nanostructures. Using hydroxyapatite formation mechanisms in hydrothermal and solvothermal systems, various chemical parameters, i.e. precursor chemical composition, are investigated for obtaining these 1D materials on gram scale. The synthesized materials are characterized by X – ray diffraction, scanning electron microscopy and laser diffraction methods.
PB  - Belgrade : Materials Research Society of Serbia
C3  - The Sixteenth Annual Conference YUCOMAT 2014: Programme and the Book of Abstracts
T1  - The hydrothermal synthesis of 1d biomedical hydroxyapatite nanostructures
SP  - 63
EP  - 63
ER  - 
@conference{
author = "Stojanović, Zoran S. and Veselinović, Ljiljana M. and Ignjatović, Nenad L. and Miljković, Miroslav and Uskoković, Dragan",
year = "2014",
abstract = "1D hydroxyapatite nanostructures such as nanotubes, ultra long nanowires and other morphological varieties have been promising material for bone reconstruction and therapy. Advantages like high specific surface, packing properties and mechanical properties make those nanostructures excellent candidates for scaffolds. This work is focused on soft hydrothermal routes for preparing different 1D nanostructures. Using hydroxyapatite formation mechanisms in hydrothermal and solvothermal systems, various chemical parameters, i.e. precursor chemical composition, are investigated for obtaining these 1D materials on gram scale. The synthesized materials are characterized by X – ray diffraction, scanning electron microscopy and laser diffraction methods.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "The Sixteenth Annual Conference YUCOMAT 2014: Programme and the Book of Abstracts",
title = "The hydrothermal synthesis of 1d biomedical hydroxyapatite nanostructures",
pages = "63-63"
}
Stojanović, Z. S., Veselinović, L. M., Ignjatović, N. L., Miljković, M.,& Uskoković, D.. (2014). The hydrothermal synthesis of 1d biomedical hydroxyapatite nanostructures. in The Sixteenth Annual Conference YUCOMAT 2014: Programme and the Book of Abstracts
Belgrade : Materials Research Society of Serbia., 63-63.
Stojanović ZS, Veselinović LM, Ignjatović NL, Miljković M, Uskoković D. The hydrothermal synthesis of 1d biomedical hydroxyapatite nanostructures. in The Sixteenth Annual Conference YUCOMAT 2014: Programme and the Book of Abstracts. 2014;:63-63..
Stojanović, Zoran S., Veselinović, Ljiljana M., Ignjatović, Nenad L., Miljković, Miroslav, Uskoković, Dragan, "The hydrothermal synthesis of 1d biomedical hydroxyapatite nanostructures" in The Sixteenth Annual Conference YUCOMAT 2014: Programme and the Book of Abstracts (2014):63-63.

Microstructure evolution and phase transition in Er doped BaTiO3 ceramics

Paunović, Vesna; Mitić, Vojislav V.; Miljković, Miroslav; Živković, Ljiljana

(Belgrade : Serbian Ceramic Society, 2013)

TY  - CONF
AU  - Paunović, Vesna
AU  - Mitić, Vojislav V.
AU  - Miljković, Miroslav
AU  - Živković, Ljiljana
PY  - 2013
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/674
UR  - http://dais.sanu.ac.rs/123456789/412
UR  - http://www.itn.sanu.ac.rs/opus4/files/674/Paunovic-ACAII-20.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7425
AB  - The Er doped BaTiO3 ceramics, with different Er2O3 content, ranging from 0.01 to 1.0 wt% Er, were investigated regarding their microstructural and dielectric characteristics in this paper. Doped BaTiO3 were prepared by using conventional method of solid state sintering at 1380 °C for four hours. SEM analysis of Er/BaTiO3 doped ceramics showed that in samples doped with a rareearth ions low level, the grain size ranged from 20-40 μm, while with the higher dopant concentration the abnormal grain growth is inhibited and the grain size ranged between 2-10μm. Dielectric measurements were carried out as a function of temperature up to180°C at different frequencies. The low doped samples sintered at 1380 °C, display the high value of dielectric permittivity at room temperature, 2160 for 0.01 Er/BaTiO3. A nearly flat permittivity-response was obtained in specimens with higher additive content. Using a Curie-Weiss low and modified Curie-Weiss low the Curie constant C, Curie temperature Tc and a critical exponent of nonlinearity γ were calculated. The Curie temperature of doped samples were ranged from 126 to 130 °C. The Curie constant for all series of samples decrease with increase of dopant concentration and the lowest values were mesured from samples doped with 0.01 wt% of aditive. The obtained value of γ pointed out that the specimens have almost sharp phase transition.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
T1  - Microstructure evolution and phase transition in Er doped BaTiO3 ceramics
SP  - 20
EP  - 20
ER  - 
@conference{
author = "Paunović, Vesna and Mitić, Vojislav V. and Miljković, Miroslav and Živković, Ljiljana",
year = "2013",
abstract = "The Er doped BaTiO3 ceramics, with different Er2O3 content, ranging from 0.01 to 1.0 wt% Er, were investigated regarding their microstructural and dielectric characteristics in this paper. Doped BaTiO3 were prepared by using conventional method of solid state sintering at 1380 °C for four hours. SEM analysis of Er/BaTiO3 doped ceramics showed that in samples doped with a rareearth ions low level, the grain size ranged from 20-40 μm, while with the higher dopant concentration the abnormal grain growth is inhibited and the grain size ranged between 2-10μm. Dielectric measurements were carried out as a function of temperature up to180°C at different frequencies. The low doped samples sintered at 1380 °C, display the high value of dielectric permittivity at room temperature, 2160 for 0.01 Er/BaTiO3. A nearly flat permittivity-response was obtained in specimens with higher additive content. Using a Curie-Weiss low and modified Curie-Weiss low the Curie constant C, Curie temperature Tc and a critical exponent of nonlinearity γ were calculated. The Curie temperature of doped samples were ranged from 126 to 130 °C. The Curie constant for all series of samples decrease with increase of dopant concentration and the lowest values were mesured from samples doped with 0.01 wt% of aditive. The obtained value of γ pointed out that the specimens have almost sharp phase transition.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade",
title = "Microstructure evolution and phase transition in Er doped BaTiO3 ceramics",
pages = "20-20"
}
Paunović, V., Mitić, V. V., Miljković, M.,& Živković, L.. (2013). Microstructure evolution and phase transition in Er doped BaTiO3 ceramics. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
Belgrade : Serbian Ceramic Society., 20-20.
Paunović V, Mitić VV, Miljković M, Živković L. Microstructure evolution and phase transition in Er doped BaTiO3 ceramics. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade. 2013;:20-20..
Paunović, Vesna, Mitić, Vojislav V., Miljković, Miroslav, Živković, Ljiljana, "Microstructure evolution and phase transition in Er doped BaTiO3 ceramics" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade (2013):20-20.

Apatite formation on nanomaterial calcium phosphate/poly-DL-lactide-co-glycolide in simulated body fluid

Vukelić, Marija; Mitić, Žarko; Miljković, Miroslav; Živković, Jelena; Ignjatović, Nenad L.; Uskoković, Dragan; Živanov Čurlis, Jelena; Vasiljević, Perica; Najman, Stevo

(Milano : Wichtig Publishing, 2012)

TY  - JOUR
AU  - Vukelić, Marija
AU  - Mitić, Žarko
AU  - Miljković, Miroslav
AU  - Živković, Jelena
AU  - Ignjatović, Nenad L.
AU  - Uskoković, Dragan
AU  - Živanov Čurlis, Jelena
AU  - Vasiljević, Perica
AU  - Najman, Stevo
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/489
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/754
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7451
AB  - Simulated body fluid (SBF) is an artificial fluid which has ionic composition and ionic concentration similar to human blood plasma. Purpose: This paper compares the interaction between the nanomaterial containing calcium phosphate/poly-dl-lactide-co-glycolide (N-CP/PLGA) and SBF, in order to investigate whether and to what extent inorganic ionic composition of human blood plasma leads to the aforementioned changes in the material. Methods: N-CP/PLGA was incubated for 1, 2, 3, and 5 weeks in SBF. The surface of the material was analyzed on SEM-EDS and FTIR spectrometer, while SBF was subjected to pH and electrical conductivity measurement. Results: Our results indicate that dissolution of the polymer component of the material N-CP/PLGA and precipitation of the material similar to hydroxyapatite on its surface are based on the morphologic changes seen in this material. Conclusions: The mechanism of the apatite formation on the bioceramic surface was intensively studied and was considered crucial in designing the new biomaterials. The results obtained in this work indicate that N-CP/PLGA may be a good candidate for application to bone regeneration.
PB  - Milano : Wichtig Publishing
T2  - Journal of Applied Biomaterials and Functional Materials
T1  - Apatite formation on nanomaterial calcium phosphate/poly-DL-lactide-co-glycolide in simulated body fluid
SP  - 43
EP  - 48
DO  - 10.5301/JABFM.2012.9274
ER  - 
@article{
author = "Vukelić, Marija and Mitić, Žarko and Miljković, Miroslav and Živković, Jelena and Ignjatović, Nenad L. and Uskoković, Dragan and Živanov Čurlis, Jelena and Vasiljević, Perica and Najman, Stevo",
year = "2012",
abstract = "Simulated body fluid (SBF) is an artificial fluid which has ionic composition and ionic concentration similar to human blood plasma. Purpose: This paper compares the interaction between the nanomaterial containing calcium phosphate/poly-dl-lactide-co-glycolide (N-CP/PLGA) and SBF, in order to investigate whether and to what extent inorganic ionic composition of human blood plasma leads to the aforementioned changes in the material. Methods: N-CP/PLGA was incubated for 1, 2, 3, and 5 weeks in SBF. The surface of the material was analyzed on SEM-EDS and FTIR spectrometer, while SBF was subjected to pH and electrical conductivity measurement. Results: Our results indicate that dissolution of the polymer component of the material N-CP/PLGA and precipitation of the material similar to hydroxyapatite on its surface are based on the morphologic changes seen in this material. Conclusions: The mechanism of the apatite formation on the bioceramic surface was intensively studied and was considered crucial in designing the new biomaterials. The results obtained in this work indicate that N-CP/PLGA may be a good candidate for application to bone regeneration.",
publisher = "Milano : Wichtig Publishing",
journal = "Journal of Applied Biomaterials and Functional Materials",
title = "Apatite formation on nanomaterial calcium phosphate/poly-DL-lactide-co-glycolide in simulated body fluid",
pages = "43-48",
doi = "10.5301/JABFM.2012.9274"
}
Vukelić, M., Mitić, Ž., Miljković, M., Živković, J., Ignjatović, N. L., Uskoković, D., Živanov Čurlis, J., Vasiljević, P.,& Najman, S.. (2012). Apatite formation on nanomaterial calcium phosphate/poly-DL-lactide-co-glycolide in simulated body fluid. in Journal of Applied Biomaterials and Functional Materials
Milano : Wichtig Publishing., 43-48.
https://doi.org/10.5301/JABFM.2012.9274
Vukelić M, Mitić Ž, Miljković M, Živković J, Ignjatović NL, Uskoković D, Živanov Čurlis J, Vasiljević P, Najman S. Apatite formation on nanomaterial calcium phosphate/poly-DL-lactide-co-glycolide in simulated body fluid. in Journal of Applied Biomaterials and Functional Materials. 2012;:43-48.
doi:10.5301/JABFM.2012.9274 .
Vukelić, Marija, Mitić, Žarko, Miljković, Miroslav, Živković, Jelena, Ignjatović, Nenad L., Uskoković, Dragan, Živanov Čurlis, Jelena, Vasiljević, Perica, Najman, Stevo, "Apatite formation on nanomaterial calcium phosphate/poly-DL-lactide-co-glycolide in simulated body fluid" in Journal of Applied Biomaterials and Functional Materials (2012):43-48,
https://doi.org/10.5301/JABFM.2012.9274 . .
7
6
9

Ho2O3 Additive Effects on Microstructure and Dielectrical Properties of BaTiO3 Ceramics

Paunović, Vesna; Mitić, Vojislav V.; Živković, Ljiljana; Miljković, Miroslav

(Belgrade : Serbian Ceramic Society, 2012)

TY  - CONF
AU  - Paunović, Vesna
AU  - Mitić, Vojislav V.
AU  - Živković, Ljiljana
AU  - Miljković, Miroslav
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/526
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/793
UR  - http://www.itn.sanu.ac.rs/opus4/files/793/Paunovic_ACAI.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7469
AB  - Doped BaTiO3-ceramics is very interesting for its application as resistors with PTCR, multilayer ceramics capacitors, thermal sensors etc. Ho doped BaTiO3 ceramics, with different Ho2O3 content, ranging from 0.01 to 1.0 wt% Ho, were investigated regarding their microstructural and dielectric characteristics. The samples were prepared by the conventional solid state reaction and sintered at 1320°, 1350 °C and 1380°C in an air atmosphere for 4 hours. The grain size and microstructure characteristics for various samples and their phase composition were carried out using a scanning electron microscope SEM equipped with EDS system. SEM analysis of Ho/BaTiO3 doped ceramics showed that in samples doped with a low level of rare-earth ions, the grain size ranged from 10-40mm, while with the higher dopant concentration the abnormal grain growth is inhibited and the grain size ranged between 2-10μm. Dielectric measurements were carried out as a function of temperature up to180°C. The low doped samples sintered at 1380°C, display the high value of dielectric permittivity at room temperature, 2500 for 0.01Ho/BaTiO3. A nearly flat permittivity-response was obtained in specimens with higher additive content. Using a modified Curie-Weiss low the Curie constant (C/) and a critical exponent γ were calculated. The obtained values of γ pointed out the diffuse phase transformation in heavily doped BaTiO3 samples.
PB  - Belgrade : Serbian Ceramic Society
C3  - The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts
T1  - Ho2O3 Additive Effects on Microstructure and Dielectrical Properties of BaTiO3 Ceramics
SP  - 10
EP  - 10
ER  - 
@conference{
author = "Paunović, Vesna and Mitić, Vojislav V. and Živković, Ljiljana and Miljković, Miroslav",
year = "2012",
abstract = "Doped BaTiO3-ceramics is very interesting for its application as resistors with PTCR, multilayer ceramics capacitors, thermal sensors etc. Ho doped BaTiO3 ceramics, with different Ho2O3 content, ranging from 0.01 to 1.0 wt% Ho, were investigated regarding their microstructural and dielectric characteristics. The samples were prepared by the conventional solid state reaction and sintered at 1320°, 1350 °C and 1380°C in an air atmosphere for 4 hours. The grain size and microstructure characteristics for various samples and their phase composition were carried out using a scanning electron microscope SEM equipped with EDS system. SEM analysis of Ho/BaTiO3 doped ceramics showed that in samples doped with a low level of rare-earth ions, the grain size ranged from 10-40mm, while with the higher dopant concentration the abnormal grain growth is inhibited and the grain size ranged between 2-10μm. Dielectric measurements were carried out as a function of temperature up to180°C. The low doped samples sintered at 1380°C, display the high value of dielectric permittivity at room temperature, 2500 for 0.01Ho/BaTiO3. A nearly flat permittivity-response was obtained in specimens with higher additive content. Using a modified Curie-Weiss low the Curie constant (C/) and a critical exponent γ were calculated. The obtained values of γ pointed out the diffuse phase transformation in heavily doped BaTiO3 samples.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts",
title = "Ho2O3 Additive Effects on Microstructure and Dielectrical Properties of BaTiO3 Ceramics",
pages = "10-10"
}
Paunović, V., Mitić, V. V., Živković, L.,& Miljković, M.. (2012). Ho2O3 Additive Effects on Microstructure and Dielectrical Properties of BaTiO3 Ceramics. in The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts
Belgrade : Serbian Ceramic Society., 10-10.
Paunović V, Mitić VV, Živković L, Miljković M. Ho2O3 Additive Effects on Microstructure and Dielectrical Properties of BaTiO3 Ceramics. in The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts. 2012;:10-10..
Paunović, Vesna, Mitić, Vojislav V., Živković, Ljiljana, Miljković, Miroslav, "Ho2O3 Additive Effects on Microstructure and Dielectrical Properties of BaTiO3 Ceramics" in The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts (2012):10-10.

Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties

Paunović, Vesna; Mitić, Vojislav V.; Miljković, Miroslav; Pavlović, Vera P.; Živković, Ljiljana

(Belgrade : International Institute for the Science of Sintering, 2012)

TY  - JOUR
AU  - Paunović, Vesna
AU  - Mitić, Vojislav V.
AU  - Miljković, Miroslav
AU  - Pavlović, Vera P.
AU  - Živković, Ljiljana
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/194
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/453
UR  - http://www.itn.sanu.ac.rs/opus4/files/453/0350-820X1202223P.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7364
AB  - Doped BaTiO 3-ceramics is very interesting for their application as PTCR resistors, multilayer ceramic capacitors, thermal sensors etc. Ho doped BaTiO 3 ceramics, with different Ho 2O 3 content, ranging from 0.01 to 1.0 wt% Ho, were investigated regarding their microstructural and dielectric characteristics. The samples were prepared by the conventional solid state reaction and sintered at 1320° and 1380°C in an air atmosphere for 4 hours. The grain size and microstructure characteristics for various samples and their phase composition was carried out using a scanning electron microscope (SEM) equipped with EDS system. SEM analysis of Ho/BaTiO 3 doped ceramics showed that in samples doped with a rare-earth ions low level, the grain size ranged from 20-30μμm, while with the higher dopant concentration the abnormal grain growth is inhibited and the grain size ranged between 2-10μμm. Dielectric measurements were carried out as a function of temperature up to180 °C. The low doped samples sintered at 1380 °C, display the high value of dielectric permittivity at room temperature, 2400 for 0.01 Ho/BaTiO 3. A nearly flat permittivity-response was obtained in specimens with higher additive content. Using a Curie-Weiss low and modified CurieWeiss low the Curie constant (C), Curie temperature (Tc) and a critical exponent of nonlinearity (γ) were calculated. The obtained value of γ pointed out that the specimens have almost sharp phase transition.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties
SP  - 223
EP  - 233
DO  - 10.2298/SOS1202223P
ER  - 
@article{
author = "Paunović, Vesna and Mitić, Vojislav V. and Miljković, Miroslav and Pavlović, Vera P. and Živković, Ljiljana",
year = "2012",
abstract = "Doped BaTiO 3-ceramics is very interesting for their application as PTCR resistors, multilayer ceramic capacitors, thermal sensors etc. Ho doped BaTiO 3 ceramics, with different Ho 2O 3 content, ranging from 0.01 to 1.0 wt% Ho, were investigated regarding their microstructural and dielectric characteristics. The samples were prepared by the conventional solid state reaction and sintered at 1320° and 1380°C in an air atmosphere for 4 hours. The grain size and microstructure characteristics for various samples and their phase composition was carried out using a scanning electron microscope (SEM) equipped with EDS system. SEM analysis of Ho/BaTiO 3 doped ceramics showed that in samples doped with a rare-earth ions low level, the grain size ranged from 20-30μμm, while with the higher dopant concentration the abnormal grain growth is inhibited and the grain size ranged between 2-10μμm. Dielectric measurements were carried out as a function of temperature up to180 °C. The low doped samples sintered at 1380 °C, display the high value of dielectric permittivity at room temperature, 2400 for 0.01 Ho/BaTiO 3. A nearly flat permittivity-response was obtained in specimens with higher additive content. Using a Curie-Weiss low and modified CurieWeiss low the Curie constant (C), Curie temperature (Tc) and a critical exponent of nonlinearity (γ) were calculated. The obtained value of γ pointed out that the specimens have almost sharp phase transition.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties",
pages = "223-233",
doi = "10.2298/SOS1202223P"
}
Paunović, V., Mitić, V. V., Miljković, M., Pavlović, V. P.,& Živković, L.. (2012). Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 223-233.
https://doi.org/10.2298/SOS1202223P
Paunović V, Mitić VV, Miljković M, Pavlović VP, Živković L. Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties. in Science of Sintering. 2012;:223-233.
doi:10.2298/SOS1202223P .
Paunović, Vesna, Mitić, Vojislav V., Miljković, Miroslav, Pavlović, Vera P., Živković, Ljiljana, "Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties" in Science of Sintering (2012):223-233,
https://doi.org/10.2298/SOS1202223P . .
9
7
7

Interaction of biomaterial containing calcium hydroxyapatite/poly-l-lactide with simulated body fluid

Vukelić, Marija; Mitić, Žarko; Miljković, Miroslav; Živković, Jelena; Ignjatović, Nenad L.; Uskoković, Dragan

(Niš : University of Niš, Faculty of Medicine; Department of the Serbian Medical Society Niš, 2011)

TY  - JOUR
AU  - Vukelić, Marija
AU  - Mitić, Žarko
AU  - Miljković, Miroslav
AU  - Živković, Jelena
AU  - Ignjatović, Nenad L.
AU  - Uskoković, Dragan
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/701
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/973
UR  - http://www.itn.sanu.ac.rs/opus4/files/973/Vukelic_Acta%20Medica%20Medianae_50_4_2011.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7521
AB  - The purpose of biomaterials is to replace a part or a function of the body in a safe, physiologically and economically acceptable way. The process of the reconstruction of bone defects has always been a big problem in orthopedics and maxillofacial surgery. Since hydroxyapatite (HAp) was detected as a component, the predominant constituent and the integral element of Mammalian bones, the development of the phospate ceramics as potential materials for implantation was enabled. This study investigated whether and in which way biomaterial calcium hydroxyapatite/poly-L-lactide (HAp/PLLA) interacts with the ionic composition of the human plasma. The simulated body fluid (SBF) is an artificial fluid that has the ionic composition and ionic concentration similar to the human blood plasma. HAp/PLLA was incubated for 1, 2, 3 and 5 weeks in SBF. The surfaces of both treated and untreated materials were analyzed on a scanning electron microscopy (SEM), and were also exposed to the energy dispersive X-ray spectroscopy (EDS), while SBF was submitted to the measuring of pH and electrical conductivity. However, our results indicate that the degradational changes of the material HAp/PLLA in SBF start from the surface of the treated material and that observed changes are the consequence of dissolution of its polymer component and the precipitation of the material similar to hydroxyapatite on its surface. This material shows good characteristics that place it among good candidates for the application in orthopedics and maxillofacial surgery.
PB  - Niš : University of Niš, Faculty of Medicine; Department of  the Serbian Medical Society Niš
T2  - Acta Medica Medianae
T1  - Interaction of biomaterial containing calcium hydroxyapatite/poly-l-lactide with simulated body fluid
SP  - 35
EP  - 39
DO  - 10.5633/amm.2011.0406
ER  - 
@article{
author = "Vukelić, Marija and Mitić, Žarko and Miljković, Miroslav and Živković, Jelena and Ignjatović, Nenad L. and Uskoković, Dragan",
year = "2011",
abstract = "The purpose of biomaterials is to replace a part or a function of the body in a safe, physiologically and economically acceptable way. The process of the reconstruction of bone defects has always been a big problem in orthopedics and maxillofacial surgery. Since hydroxyapatite (HAp) was detected as a component, the predominant constituent and the integral element of Mammalian bones, the development of the phospate ceramics as potential materials for implantation was enabled. This study investigated whether and in which way biomaterial calcium hydroxyapatite/poly-L-lactide (HAp/PLLA) interacts with the ionic composition of the human plasma. The simulated body fluid (SBF) is an artificial fluid that has the ionic composition and ionic concentration similar to the human blood plasma. HAp/PLLA was incubated for 1, 2, 3 and 5 weeks in SBF. The surfaces of both treated and untreated materials were analyzed on a scanning electron microscopy (SEM), and were also exposed to the energy dispersive X-ray spectroscopy (EDS), while SBF was submitted to the measuring of pH and electrical conductivity. However, our results indicate that the degradational changes of the material HAp/PLLA in SBF start from the surface of the treated material and that observed changes are the consequence of dissolution of its polymer component and the precipitation of the material similar to hydroxyapatite on its surface. This material shows good characteristics that place it among good candidates for the application in orthopedics and maxillofacial surgery.",
publisher = "Niš : University of Niš, Faculty of Medicine; Department of  the Serbian Medical Society Niš",
journal = "Acta Medica Medianae",
title = "Interaction of biomaterial containing calcium hydroxyapatite/poly-l-lactide with simulated body fluid",
pages = "35-39",
doi = "10.5633/amm.2011.0406"
}
Vukelić, M., Mitić, Ž., Miljković, M., Živković, J., Ignjatović, N. L.,& Uskoković, D.. (2011). Interaction of biomaterial containing calcium hydroxyapatite/poly-l-lactide with simulated body fluid. in Acta Medica Medianae
Niš : University of Niš, Faculty of Medicine; Department of  the Serbian Medical Society Niš., 35-39.
https://doi.org/10.5633/amm.2011.0406
Vukelić M, Mitić Ž, Miljković M, Živković J, Ignjatović NL, Uskoković D. Interaction of biomaterial containing calcium hydroxyapatite/poly-l-lactide with simulated body fluid. in Acta Medica Medianae. 2011;:35-39.
doi:10.5633/amm.2011.0406 .
Vukelić, Marija, Mitić, Žarko, Miljković, Miroslav, Živković, Jelena, Ignjatović, Nenad L., Uskoković, Dragan, "Interaction of biomaterial containing calcium hydroxyapatite/poly-l-lactide with simulated body fluid" in Acta Medica Medianae (2011):35-39,
https://doi.org/10.5633/amm.2011.0406 . .
2

Synthesis of BCP and BCP/PLGA biomaterials by ultrasonic spray pyrolysis

Radić, Ivana; Ignjatović, Nenad L.; Jugović, Dragana; Nedić, Zoran; Mitrić, Miodrag; Miljković, Miroslav

(Society of Physical Chemists of Serbia, 2004)

TY  - CONF
AU  - Radić, Ivana
AU  - Ignjatović, Nenad L.
AU  - Jugović, Dragana
AU  - Nedić, Zoran
AU  - Mitrić, Miodrag
AU  - Miljković, Miroslav
PY  - 2004
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9535
AB  - The most significant mass part of the bony tissue consists of calcium phosphate ceramics. This paper describes method of obtaining fine particles of biphasic calcium phosphate (BCP) as well as fine particles of biphasic calcium phosphate covered by polymer, poly-lactide-co-glycolide (BCP/PLGA), by ultrasonic spray pyrolysis. Methods used for characterization of obtained particles of BCP and BCP/PLGA are Infrared Spectroscopy (IR) and Scanning Electron Microscopy (SEM) techniques.
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2004: 7th international conference on fundemental and applied aspract of physical chemistry
T1  - Synthesis of BCP and BCP/PLGA biomaterials by ultrasonic spray pyrolysis
VL  - 2
SP  - 487
EP  - 489
ER  - 
@conference{
author = "Radić, Ivana and Ignjatović, Nenad L. and Jugović, Dragana and Nedić, Zoran and Mitrić, Miodrag and Miljković, Miroslav",
year = "2004",
abstract = "The most significant mass part of the bony tissue consists of calcium phosphate ceramics. This paper describes method of obtaining fine particles of biphasic calcium phosphate (BCP) as well as fine particles of biphasic calcium phosphate covered by polymer, poly-lactide-co-glycolide (BCP/PLGA), by ultrasonic spray pyrolysis. Methods used for characterization of obtained particles of BCP and BCP/PLGA are Infrared Spectroscopy (IR) and Scanning Electron Microscopy (SEM) techniques.",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2004: 7th international conference on fundemental and applied aspract of physical chemistry",
title = "Synthesis of BCP and BCP/PLGA biomaterials by ultrasonic spray pyrolysis",
volume = "2",
pages = "487-489"
}
Radić, I., Ignjatović, N. L., Jugović, D., Nedić, Z., Mitrić, M.,& Miljković, M.. (2004). Synthesis of BCP and BCP/PLGA biomaterials by ultrasonic spray pyrolysis. in Physical chemistry 2004: 7th international conference on fundemental and applied aspract of physical chemistry
Society of Physical Chemists of Serbia., 2, 487-489.
Radić I, Ignjatović NL, Jugović D, Nedić Z, Mitrić M, Miljković M. Synthesis of BCP and BCP/PLGA biomaterials by ultrasonic spray pyrolysis. in Physical chemistry 2004: 7th international conference on fundemental and applied aspract of physical chemistry. 2004;2:487-489..
Radić, Ivana, Ignjatović, Nenad L., Jugović, Dragana, Nedić, Zoran, Mitrić, Miodrag, Miljković, Miroslav, "Synthesis of BCP and BCP/PLGA biomaterials by ultrasonic spray pyrolysis" in Physical chemistry 2004: 7th international conference on fundemental and applied aspract of physical chemistry, 2 (2004):487-489.