TY  - JOUR
AU  - Kalijadis, Ana
AU  - Gavrilov, Nemanja M.
AU  - Jokić, Bojan M.
AU  - Gilić, Martina
AU  - Krstić, Aleksandar D.
AU  - Pašti, Igor A.
AU  - Babić, Biljana M.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8495
AB  - Resorcinol–formaldehyde (RF) cryogels were synthesized by sol–gel polycondensation of resorcinol with formaldehyde and freeze-drying was carried out with t-butanol. Carbon cryogel (CC) was obtained by pyrolyzing RF cryogels in an inert atmosphere to 950 °C. Nitrogen doped CCs (CCN) were synthesized by introducing melamine into RF precursor mixture solution to obtain nitrogen concentration 2, 6 and 10 wt.%. Material was characterized by elemental analysis, nitrogen adsorption– desorption measurements, scanning electron microscopy (SEM), Raman spectroscopy, FT-IR Spectroscopy. Cyclic voltammetry (CV) was used to investigate capacitive and electrocatalytic properties. Conductivity measurement was also performed. Elemental analysis results confirmed presence of nitrogen in CCN samples in the range from 0.45 to 1.15 wt.%. Raman spectroscopy of the samples showed increase of D and G peak integrated intensity ratio (ID/IG) with nitrogen doping suggesting that the structural disorder as well as edge plane density increase, but according to similar ID/IG values for CCN samples, their share is not directly related to the amount of incorporated N. Characterization by nitrogen adsorption showed that overall specific surface and maximum mesopores are achieved in CCN sample with medium nitrogen concentration. Results of cyclic voltammetry experiments demonstrated maximum capacitance for CCN sample with smallest N wt.% indicating that narrow pore size distribution and high specific surface area are dominant factors to achieve good capacitive behavior. The relatively low doping level of nitrogen reached in CCN samples may be the reason for the incomplete reduction of oxygen to hydroxide and furthermore it turned out that presence of N in the structure of CC had a negligible effect on the otherwise relatively high conductivity of CC. © 2019 Elsevier B.V.
T2  - Materials Chemistry and Physics
T1  - Composition, structure and potential energy application of nitrogen doped carbon cryogels
VL  - 239
SP  - 122120
DO  - 10.1016/j.matchemphys.2019.122120
ER  - 

@article{
author = "Kalijadis, Ana and Gavrilov, Nemanja M. and Jokić, Bojan M. and Gilić, Martina and Krstić, Aleksandar D. and Pašti, Igor A. and Babić, Biljana M.",
year = "2020",
abstract = "Resorcinol–formaldehyde (RF) cryogels were synthesized by sol–gel polycondensation of resorcinol with formaldehyde and freeze-drying was carried out with t-butanol. Carbon cryogel (CC) was obtained by pyrolyzing RF cryogels in an inert atmosphere to 950 °C. Nitrogen doped CCs (CCN) were synthesized by introducing melamine into RF precursor mixture solution to obtain nitrogen concentration 2, 6 and 10 wt.%. Material was characterized by elemental analysis, nitrogen adsorption– desorption measurements, scanning electron microscopy (SEM), Raman spectroscopy, FT-IR Spectroscopy. Cyclic voltammetry (CV) was used to investigate capacitive and electrocatalytic properties. Conductivity measurement was also performed. Elemental analysis results confirmed presence of nitrogen in CCN samples in the range from 0.45 to 1.15 wt.%. Raman spectroscopy of the samples showed increase of D and G peak integrated intensity ratio (ID/IG) with nitrogen doping suggesting that the structural disorder as well as edge plane density increase, but according to similar ID/IG values for CCN samples, their share is not directly related to the amount of incorporated N. Characterization by nitrogen adsorption showed that overall specific surface and maximum mesopores are achieved in CCN sample with medium nitrogen concentration. Results of cyclic voltammetry experiments demonstrated maximum capacitance for CCN sample with smallest N wt.% indicating that narrow pore size distribution and high specific surface area are dominant factors to achieve good capacitive behavior. The relatively low doping level of nitrogen reached in CCN samples may be the reason for the incomplete reduction of oxygen to hydroxide and furthermore it turned out that presence of N in the structure of CC had a negligible effect on the otherwise relatively high conductivity of CC. © 2019 Elsevier B.V.",
journal = "Materials Chemistry and Physics",
title = "Composition, structure and potential energy application of nitrogen doped carbon cryogels",
volume = "239",
pages = "122120",
doi = "10.1016/j.matchemphys.2019.122120"
}

Kalijadis, A., Gavrilov, N. M., Jokić, B. M., Gilić, M., Krstić, A. D., Pašti, I. A.,& Babić, B. M.. (2020). Composition, structure and potential energy application of nitrogen doped carbon cryogels. in Materials Chemistry and Physics, 239, 122120.
https://doi.org/10.1016/j.matchemphys.2019.122120

Kalijadis A, Gavrilov NM, Jokić BM, Gilić M, Krstić AD, Pašti IA, Babić BM. Composition, structure and potential energy application of nitrogen doped carbon cryogels. in Materials Chemistry and Physics. 2020;239:122120.
doi:10.1016/j.matchemphys.2019.122120 .

Kalijadis, Ana, Gavrilov, Nemanja M., Jokić, Bojan M., Gilić, Martina, Krstić, Aleksandar D., Pašti, Igor A., Babić, Biljana M., "Composition, structure and potential energy application of nitrogen doped carbon cryogels" in Materials Chemistry and Physics, 239 (2020):122120,
https://doi.org/10.1016/j.matchemphys.2019.122120 . .

TY  - JOUR
AU  - Marković, Darka
AU  - Vasiljević, Jelena
AU  - Ašanin, Jelena
AU  - Ilić‐Tomić, Tatjana
AU  - Tomšič, Brigita
AU  - Jokić, Bojan M.
AU  - Mitrić, Miodrag
AU  - Simončič, Barbara
AU  - Mišić, Dušan
AU  - Radetić, Maja M.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8844
AB  - A novel impregnation process for the fabrication of cotton nanocomposite with strong antimicrobial activity against antibiotics-resistant bacteria and yeast was developed. The impregnation process includes the sol–gel treatment of fabric with (3-aminopropyl)triethoxysilane in the first step, and synthesis of the CuO/Cu2O nanoparticles (NPs) on the fabric surface in the second step. The in situ synthesis of the CuO/Cu2O NPs was based on the adsorption of Cu2+-ions by the introduced amino groups of the sol–gel coating. The adsorbed Cu2+-ions are subsequently reduced in the alkaline solution of NaBH4. X-ray diffraction measurements confirmed the formation of CuO/Cu2O NPs. Scanning electron microscopy and atomic absorption spectrometry analyses indicate that the particle size, agglomeration, and amounts of synthesized NPs were highly affected by the initial concentration of CuSO4 solution. The toxicity of nanocomposites to human keratinocytes (HaCaT) and antimicrobial activity against Gram-negative Escherichia coli ATCC 25922, E. coli ATCC BAA 2469, and Klebsiella pneumoniae ATCC BAA 2146, and Gram-positive bacteria Staphylococcus aureus ATCC 25923, S. aureus ATCC 43300 and yeast Candida albicans ATCC 24433 strongly depended on the copper content. In addition to excellent antimicrobial activity, controlled release of Cu2+-ions from the fabrics into physiological saline solution was obtained. © 2020 Wiley Periodicals, Inc.
T2  - Journal of Applied Polymer Science
T1  - The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions
VL  - 137
IS  - 40
SP  - 49194
DO  - 10.1002/app.49194
ER  - 

@article{
author = "Marković, Darka and Vasiljević, Jelena and Ašanin, Jelena and Ilić‐Tomić, Tatjana and Tomšič, Brigita and Jokić, Bojan M. and Mitrić, Miodrag and Simončič, Barbara and Mišić, Dušan and Radetić, Maja M.",
year = "2020",
abstract = "A novel impregnation process for the fabrication of cotton nanocomposite with strong antimicrobial activity against antibiotics-resistant bacteria and yeast was developed. The impregnation process includes the sol–gel treatment of fabric with (3-aminopropyl)triethoxysilane in the first step, and synthesis of the CuO/Cu2O nanoparticles (NPs) on the fabric surface in the second step. The in situ synthesis of the CuO/Cu2O NPs was based on the adsorption of Cu2+-ions by the introduced amino groups of the sol–gel coating. The adsorbed Cu2+-ions are subsequently reduced in the alkaline solution of NaBH4. X-ray diffraction measurements confirmed the formation of CuO/Cu2O NPs. Scanning electron microscopy and atomic absorption spectrometry analyses indicate that the particle size, agglomeration, and amounts of synthesized NPs were highly affected by the initial concentration of CuSO4 solution. The toxicity of nanocomposites to human keratinocytes (HaCaT) and antimicrobial activity against Gram-negative Escherichia coli ATCC 25922, E. coli ATCC BAA 2469, and Klebsiella pneumoniae ATCC BAA 2146, and Gram-positive bacteria Staphylococcus aureus ATCC 25923, S. aureus ATCC 43300 and yeast Candida albicans ATCC 24433 strongly depended on the copper content. In addition to excellent antimicrobial activity, controlled release of Cu2+-ions from the fabrics into physiological saline solution was obtained. © 2020 Wiley Periodicals, Inc.",
journal = "Journal of Applied Polymer Science",
title = "The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions",
volume = "137",
number = "40",
pages = "49194",
doi = "10.1002/app.49194"
}

Marković, D., Vasiljević, J., Ašanin, J., Ilić‐Tomić, T., Tomšič, B., Jokić, B. M., Mitrić, M., Simončič, B., Mišić, D.,& Radetić, M. M.. (2020). The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions. in Journal of Applied Polymer Science, 137(40), 49194.
https://doi.org/10.1002/app.49194

Marković D, Vasiljević J, Ašanin J, Ilić‐Tomić T, Tomšič B, Jokić BM, Mitrić M, Simončič B, Mišić D, Radetić MM. The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions. in Journal of Applied Polymer Science. 2020;137(40):49194.
doi:10.1002/app.49194 .

Marković, Darka, Vasiljević, Jelena, Ašanin, Jelena, Ilić‐Tomić, Tatjana, Tomšič, Brigita, Jokić, Bojan M., Mitrić, Miodrag, Simončič, Barbara, Mišić, Dušan, Radetić, Maja M., "The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions" in Journal of Applied Polymer Science, 137, no. 40 (2020):49194,
https://doi.org/10.1002/app.49194 . .

TY  - JOUR
AU  - Potočnik, Jelena
AU  - Popović, Maja
AU  - Jokić, Bojan M.
AU  - Rakočević, Zlatko Lj.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8385
AB  - In this work we investigated the influence of different deposition angles on the structural and magnetic properties of nickel thin films obtained by Glancing Angle Deposition. The films were deposited onto glass substrates at the angles of 65° and 85°. The structure of the films was studied by scanning electron microscopy, atomic force microscopy and X-ray diffraction, while the magnetic properties were analyzed using magneto-optical Kerr effect microscopy (MOKE). It was found that the variation in the deposition angle has a great influence on the porosity, crystallinity and surface roughness of the Ni films. The obtained changes in microstructure were correlated with the variation in the magnetic properties. MOKE measurements revealed that the thinner films, deposited at the angle of 85°, have a 2.5 times higher coercivity in comparison with the films deposited at the lower angle, which can be ascribed to their higher porosity. © 2019 Elsevier Ltd
T2  - Materials Research Bulletin
T1  - Tailoring the structural and magnetic properties of Ni zigzag nanostructures using different deposition angles
VL  - 119
SP  - 110540
DO  - 10.1016/j.materresbull.2019.110540
ER  - 

@article{
author = "Potočnik, Jelena and Popović, Maja and Jokić, Bojan M. and Rakočević, Zlatko Lj.",
year = "2019",
abstract = "In this work we investigated the influence of different deposition angles on the structural and magnetic properties of nickel thin films obtained by Glancing Angle Deposition. The films were deposited onto glass substrates at the angles of 65° and 85°. The structure of the films was studied by scanning electron microscopy, atomic force microscopy and X-ray diffraction, while the magnetic properties were analyzed using magneto-optical Kerr effect microscopy (MOKE). It was found that the variation in the deposition angle has a great influence on the porosity, crystallinity and surface roughness of the Ni films. The obtained changes in microstructure were correlated with the variation in the magnetic properties. MOKE measurements revealed that the thinner films, deposited at the angle of 85°, have a 2.5 times higher coercivity in comparison with the films deposited at the lower angle, which can be ascribed to their higher porosity. © 2019 Elsevier Ltd",
journal = "Materials Research Bulletin",
title = "Tailoring the structural and magnetic properties of Ni zigzag nanostructures using different deposition angles",
volume = "119",
pages = "110540",
doi = "10.1016/j.materresbull.2019.110540"
}

Potočnik, J., Popović, M., Jokić, B. M.,& Rakočević, Z. Lj.. (2019). Tailoring the structural and magnetic properties of Ni zigzag nanostructures using different deposition angles. in Materials Research Bulletin, 119, 110540.
https://doi.org/10.1016/j.materresbull.2019.110540

Potočnik J, Popović M, Jokić BM, Rakočević ZL. Tailoring the structural and magnetic properties of Ni zigzag nanostructures using different deposition angles. in Materials Research Bulletin. 2019;119:110540.
doi:10.1016/j.materresbull.2019.110540 .

Potočnik, Jelena, Popović, Maja, Jokić, Bojan M., Rakočević, Zlatko Lj., "Tailoring the structural and magnetic properties of Ni zigzag nanostructures using different deposition angles" in Materials Research Bulletin, 119 (2019):110540,
https://doi.org/10.1016/j.materresbull.2019.110540 . .

TY  - JOUR
AU  - Marković, Darka
AU  - Jokić, Bojan M.
AU  - Radovanović, Željko
AU  - Ašanin, Jelena
AU  - Radoičić, Marija B.
AU  - Mitrić, Miodrag
AU  - Mišić, Dušan
AU  - Radetić, Maja M.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8517
AB  - The antioxidant properties of cool-climate Regent wines from Podkarpacie region, Poland were investigated. Total polyphenols, total flavonoids, total monomeric anthocyanins, trans-resveratrol concentration, radical scavenging ability using 1,1-diphenyl-2-picryl-hydrazyl (DPPH) and total antioxidant capacity with TEAC and FRAP methods were measured. The average contents of the compounds determined for Regent wines were comparable to the respective data available in literature found for warm-climate wines. Correspondence Analysis of the data revealed the relation of total polyphenols content and antioxidant capacity and radical scavenging ability of studied wines, and in lesser extent correlation with total flavonoids content. The total monomeric anthocyanins content and resveratrol concentration were poorly related to the total polyphenols content and antioxidant capacity.
T2  - Cellulose Chemistry and Technology
T1  - Influence of 1,2,3,4-butanetetracarboxylic acid concentration on in situ synthesis of CuO/Cu2O nanoparticles on cotton and viscose rayon fabrics
VL  - 53
IS  - 7-8
SP  - 805
EP  - 813
DO  - 10.35812/CelluloseChemTechnol.2019.53.79
ER  - 

@article{
author = "Marković, Darka and Jokić, Bojan M. and Radovanović, Željko and Ašanin, Jelena and Radoičić, Marija B. and Mitrić, Miodrag and Mišić, Dušan and Radetić, Maja M.",
year = "2019",
abstract = "The antioxidant properties of cool-climate Regent wines from Podkarpacie region, Poland were investigated. Total polyphenols, total flavonoids, total monomeric anthocyanins, trans-resveratrol concentration, radical scavenging ability using 1,1-diphenyl-2-picryl-hydrazyl (DPPH) and total antioxidant capacity with TEAC and FRAP methods were measured. The average contents of the compounds determined for Regent wines were comparable to the respective data available in literature found for warm-climate wines. Correspondence Analysis of the data revealed the relation of total polyphenols content and antioxidant capacity and radical scavenging ability of studied wines, and in lesser extent correlation with total flavonoids content. The total monomeric anthocyanins content and resveratrol concentration were poorly related to the total polyphenols content and antioxidant capacity.",
journal = "Cellulose Chemistry and Technology",
title = "Influence of 1,2,3,4-butanetetracarboxylic acid concentration on in situ synthesis of CuO/Cu2O nanoparticles on cotton and viscose rayon fabrics",
volume = "53",
number = "7-8",
pages = "805-813",
doi = "10.35812/CelluloseChemTechnol.2019.53.79"
}

Marković, D., Jokić, B. M., Radovanović, Ž., Ašanin, J., Radoičić, M. B., Mitrić, M., Mišić, D.,& Radetić, M. M.. (2019). Influence of 1,2,3,4-butanetetracarboxylic acid concentration on in situ synthesis of CuO/Cu2O nanoparticles on cotton and viscose rayon fabrics. in Cellulose Chemistry and Technology, 53(7-8), 805-813.
https://doi.org/10.35812/CelluloseChemTechnol.2019.53.79

Marković D, Jokić BM, Radovanović Ž, Ašanin J, Radoičić MB, Mitrić M, Mišić D, Radetić MM. Influence of 1,2,3,4-butanetetracarboxylic acid concentration on in situ synthesis of CuO/Cu2O nanoparticles on cotton and viscose rayon fabrics. in Cellulose Chemistry and Technology. 2019;53(7-8):805-813.
doi:10.35812/CelluloseChemTechnol.2019.53.79 .

Marković, Darka, Jokić, Bojan M., Radovanović, Željko, Ašanin, Jelena, Radoičić, Marija B., Mitrić, Miodrag, Mišić, Dušan, Radetić, Maja M., "Influence of 1,2,3,4-butanetetracarboxylic acid concentration on in situ synthesis of CuO/Cu2O nanoparticles on cotton and viscose rayon fabrics" in Cellulose Chemistry and Technology, 53, no. 7-8 (2019):805-813,
https://doi.org/10.35812/CelluloseChemTechnol.2019.53.79 . .

TY  - JOUR
AU  - Gavrilov, Nemanja M.
AU  - Momčilović, Milan Z.
AU  - Dobrota, Ana S.
AU  - Stanković, Dalibor M.
AU  - Jokić, Bojan M.
AU  - Babić, Biljana M.
AU  - Skorodumova, Natalia V.
AU  - Mentus, Slavko V.
AU  - Pašti, Igor A.
PY  - 2018
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0257897218305838
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7727
AB  - The incorporation of trace amounts (<0.2%) of Co and Ni noticeably enhanced the catalytic activity of nitrogen-free ordered mesoporous carbon (OMC) towards oxygen reduction reaction (ORR). (Co,Ni)-doped OMCs were characterized by N2-adsorption measurements, X-ray powder diffraction, field emission scanning electron microscopy and Raman spectroscopy methods, and their ORR activity was estimated by voltammetry on rotating disk electrode in acidic and alkaline media. (Co,Ni)-doped OMCs show modest activities in acidic media, while the catalytic activity in alkaline media is rather high. The measured activities are compared to the Pt-based and Pt-free ORR catalysts reported in the literature. The number of electrons consumed per O2in metal-doped OMCs was found to vary between 2 and 4, which is advantageous in comparison to metal-free OMC. Also, the mass activities of metal-doped OMCs were found to be up to 2.5 times higher compared to that of metal-free OMC. We suggest that the ORR activity is governed by a balance between (i) textural properties, which determine the electrochemically accessible surface of the catalyst and which are influenced by the addition of a metal precursor, and (ii) novel active sites formed upon the introduction of metals into the carbon structure. In particular, our Density Functional Theory calculations suggest that Co and Ni atoms embedded into the single vacancies of graphene can activate the O2molecule and contribute to the decomposition of peroxide.
T2  - Surface and Coatings Technology
T1  - A study of ordered mesoporous carbon doped with Co and Ni as a catalyst of oxygen reduction reaction in both alkaline and acidic media
VL  - 349
SP  - 511
EP  - 521
DO  - 10.1016/j.surfcoat.2018.06.008
ER  - 

@article{
author = "Gavrilov, Nemanja M. and Momčilović, Milan Z. and Dobrota, Ana S. and Stanković, Dalibor M. and Jokić, Bojan M. and Babić, Biljana M. and Skorodumova, Natalia V. and Mentus, Slavko V. and Pašti, Igor A.",
year = "2018",
abstract = "The incorporation of trace amounts (<0.2%) of Co and Ni noticeably enhanced the catalytic activity of nitrogen-free ordered mesoporous carbon (OMC) towards oxygen reduction reaction (ORR). (Co,Ni)-doped OMCs were characterized by N2-adsorption measurements, X-ray powder diffraction, field emission scanning electron microscopy and Raman spectroscopy methods, and their ORR activity was estimated by voltammetry on rotating disk electrode in acidic and alkaline media. (Co,Ni)-doped OMCs show modest activities in acidic media, while the catalytic activity in alkaline media is rather high. The measured activities are compared to the Pt-based and Pt-free ORR catalysts reported in the literature. The number of electrons consumed per O2in metal-doped OMCs was found to vary between 2 and 4, which is advantageous in comparison to metal-free OMC. Also, the mass activities of metal-doped OMCs were found to be up to 2.5 times higher compared to that of metal-free OMC. We suggest that the ORR activity is governed by a balance between (i) textural properties, which determine the electrochemically accessible surface of the catalyst and which are influenced by the addition of a metal precursor, and (ii) novel active sites formed upon the introduction of metals into the carbon structure. In particular, our Density Functional Theory calculations suggest that Co and Ni atoms embedded into the single vacancies of graphene can activate the O2molecule and contribute to the decomposition of peroxide.",
journal = "Surface and Coatings Technology",
title = "A study of ordered mesoporous carbon doped with Co and Ni as a catalyst of oxygen reduction reaction in both alkaline and acidic media",
volume = "349",
pages = "511-521",
doi = "10.1016/j.surfcoat.2018.06.008"
}

Gavrilov, N. M., Momčilović, M. Z., Dobrota, A. S., Stanković, D. M., Jokić, B. M., Babić, B. M., Skorodumova, N. V., Mentus, S. V.,& Pašti, I. A.. (2018). A study of ordered mesoporous carbon doped with Co and Ni as a catalyst of oxygen reduction reaction in both alkaline and acidic media. in Surface and Coatings Technology, 349, 511-521.
https://doi.org/10.1016/j.surfcoat.2018.06.008

Gavrilov NM, Momčilović MZ, Dobrota AS, Stanković DM, Jokić BM, Babić BM, Skorodumova NV, Mentus SV, Pašti IA. A study of ordered mesoporous carbon doped with Co and Ni as a catalyst of oxygen reduction reaction in both alkaline and acidic media. in Surface and Coatings Technology. 2018;349:511-521.
doi:10.1016/j.surfcoat.2018.06.008 .

Gavrilov, Nemanja M., Momčilović, Milan Z., Dobrota, Ana S., Stanković, Dalibor M., Jokić, Bojan M., Babić, Biljana M., Skorodumova, Natalia V., Mentus, Slavko V., Pašti, Igor A., "A study of ordered mesoporous carbon doped with Co and Ni as a catalyst of oxygen reduction reaction in both alkaline and acidic media" in Surface and Coatings Technology, 349 (2018):511-521,
https://doi.org/10.1016/j.surfcoat.2018.06.008 . .

TY  - JOUR
AU  - Dmitrović, Svetlana
AU  - Prekajski-Đorđević, Marija D.
AU  - Jokić, Bojan M.
AU  - Branković, Goran O.
AU  - Zarubica, Aleksandra R.
AU  - Žikić, Vladimir
AU  - Matović, Branko
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7616
AB  - Spider silk fibers, collected from Pholcus Phalangioides spider were used as a template for obtaining magnesium oxide (MgO, periclase) as well as magnesium hydroxide (Mg(OH)2, brucite) fibers. Magnesium oxide fibers were obtained in a simple manner by heat induced decomposition of magnesium salt (MgCl2) in the presence of the spider silk fibers, while magnesium hydroxidefibers were synthesized by hydration of MgO fibers at 50 °C, 70°C and 90 °C, for 48 and 96 h. According to Scanning electron microscopy (SEM), dimensions of spider silk fibers determined the dimension of synthesized MgO fibers, while for Mg(OH)2 fibers, the average diameter was increased with prolonging the hydration period. The surface of Mg(OH)2 fibers was noticed to be covered with brucite in a form of plates. X-ray diffraction (XRD) analysis showed that MgO fibers were single-phased (the pure magnesium oxide fibers were obtained), while Mg(OH)2 fibers were two- or single-phased brucite depending on incubation period, and/or incubation temperature.
AB  - Vlakna paukove mreže sakupljena od Pholcus phalangioides pauka korišćena su kao matrica za dobijanje vlakana magnezijum oksida (MgO, periklas) i magnezijum-hidroksida (Mg(OH)2, brucit). Vlakna magnezijum oksida jednostavno su dobijena termičkim razlaganjem soli magnezijuma (MgCl2) u prisustvu vlakana paukove mreže, dok su vlakna magnezijum hidroksida sintetisana hidratacijom MgO vlakana na temperaturama: 50, 70 i 90 °C u trajanju od 48 i 96 h. Na osnovu
rezultata skenirajuće elektronske mikroskopije (SEM), veličina sintetisanih MgO vlakana bila je određena dimenzijama vlakana pauka, dok je za Mg(OH)2 vlakna prosečan dijametar rastao sa produženjem perioda hidratacije. Na površini Mg(OH)2 vlakana uočeni su tabličasti kristali brucita. Difrakcija X zraka (XRD) pokazala je da su vlakna periklasa jednofazna (dobijen je čist magnezijum-oksid), dok su brucitna vlakna bila dvofazna ili jednofazna, u zavisnosti od inkubacionog perioda i/ili teperature na kojoj je vršena inkubacija.
T2  - Hemijska industrija
T1  - Spider silk as a template for obtaining magnesium oxide and magnesium hydroxide fibers
T1  - Sinteza vlakana magnezijum-oksida i magnezijum-hidroksida korišćenjem paukove mreže kao matrice
VL  - 72
IS  - 1
SP  - 23
EP  - 28
DO  - 10.2298/HEMIND170404018D
ER  - 

@article{
author = "Dmitrović, Svetlana and Prekajski-Đorđević, Marija D. and Jokić, Bojan M. and Branković, Goran O. and Zarubica, Aleksandra R. and Žikić, Vladimir and Matović, Branko",
year = "2018",
abstract = "Spider silk fibers, collected from Pholcus Phalangioides spider were used as a template for obtaining magnesium oxide (MgO, periclase) as well as magnesium hydroxide (Mg(OH)2, brucite) fibers. Magnesium oxide fibers were obtained in a simple manner by heat induced decomposition of magnesium salt (MgCl2) in the presence of the spider silk fibers, while magnesium hydroxidefibers were synthesized by hydration of MgO fibers at 50 °C, 70°C and 90 °C, for 48 and 96 h. According to Scanning electron microscopy (SEM), dimensions of spider silk fibers determined the dimension of synthesized MgO fibers, while for Mg(OH)2 fibers, the average diameter was increased with prolonging the hydration period. The surface of Mg(OH)2 fibers was noticed to be covered with brucite in a form of plates. X-ray diffraction (XRD) analysis showed that MgO fibers were single-phased (the pure magnesium oxide fibers were obtained), while Mg(OH)2 fibers were two- or single-phased brucite depending on incubation period, and/or incubation temperature., Vlakna paukove mreže sakupljena od Pholcus phalangioides pauka korišćena su kao matrica za dobijanje vlakana magnezijum oksida (MgO, periklas) i magnezijum-hidroksida (Mg(OH)2, brucit). Vlakna magnezijum oksida jednostavno su dobijena termičkim razlaganjem soli magnezijuma (MgCl2) u prisustvu vlakana paukove mreže, dok su vlakna magnezijum hidroksida sintetisana hidratacijom MgO vlakana na temperaturama: 50, 70 i 90 °C u trajanju od 48 i 96 h. Na osnovu
rezultata skenirajuće elektronske mikroskopije (SEM), veličina sintetisanih MgO vlakana bila je određena dimenzijama vlakana pauka, dok je za Mg(OH)2 vlakna prosečan dijametar rastao sa produženjem perioda hidratacije. Na površini Mg(OH)2 vlakana uočeni su tabličasti kristali brucita. Difrakcija X zraka (XRD) pokazala je da su vlakna periklasa jednofazna (dobijen je čist magnezijum-oksid), dok su brucitna vlakna bila dvofazna ili jednofazna, u zavisnosti od inkubacionog perioda i/ili teperature na kojoj je vršena inkubacija.",
journal = "Hemijska industrija",
title = "Spider silk as a template for obtaining magnesium oxide and magnesium hydroxide fibers, Sinteza vlakana magnezijum-oksida i magnezijum-hidroksida korišćenjem paukove mreže kao matrice",
volume = "72",
number = "1",
pages = "23-28",
doi = "10.2298/HEMIND170404018D"
}

Dmitrović, S., Prekajski-Đorđević, M. D., Jokić, B. M., Branković, G. O., Zarubica, A. R., Žikić, V.,& Matović, B.. (2018). Spider silk as a template for obtaining magnesium oxide and magnesium hydroxide fibers. in Hemijska industrija, 72(1), 23-28.
https://doi.org/10.2298/HEMIND170404018D

Dmitrović S, Prekajski-Đorđević MD, Jokić BM, Branković GO, Zarubica AR, Žikić V, Matović B. Spider silk as a template for obtaining magnesium oxide and magnesium hydroxide fibers. in Hemijska industrija. 2018;72(1):23-28.
doi:10.2298/HEMIND170404018D .

Dmitrović, Svetlana, Prekajski-Đorđević, Marija D., Jokić, Bojan M., Branković, Goran O., Zarubica, Aleksandra R., Žikić, Vladimir, Matović, Branko, "Spider silk as a template for obtaining magnesium oxide and magnesium hydroxide fibers" in Hemijska industrija, 72, no. 1 (2018):23-28,
https://doi.org/10.2298/HEMIND170404018D . .

TY  - JOUR
AU  - Kalijadis, Ana
AU  - Đorđević, Jelena S.
AU  - Papp, Zsigmond
AU  - Jokić, Bojan M.
AU  - Spasojević, Vuk D.
AU  - Babić, Biljana M.
AU  - Trtić-Petrović, Tatjana M.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1867
AB  - In this work, a new carbon paste electrode, prepared from nitrogen-doped hydrothermal carbon (CHTCN) was applied for the electrochemical detection and determination of carbendazim fungicide. CHTCN samples with the nominal nitrogen content 0.05-0.5 wt. % in glucose precursor were prepared by simple, low-cost synthesis with the accompanying carbonization to 1273 K. The presence of nitrogen in CHTCN samples was confirmed by elemental analysis. Characterization of CHTCN as material for carbon paste electrode was achieved by cyclic voltammetry measurement of the Fe(CN)(6)(3-/4-) redox couple. The results showed that best electrochemical response was obtained from the sample with a nominal nitrogen concentration of 0.1 wt. % and with tricresyl phosphate as a binder. During the development of a differential pulse stripping voltammetric method for carbendazim determination applying new electrode, the following experimental parameters were studied: the sort and amount of binding liquid, the effect of pH, accumulation potential and accumulation time. Under optimal conditions, the electrode offered linearity in the wide concentration range from 25 to 490 ng cm(-3) and an estimated detection limit of 1.21 ng cm(-3). Moreover, the electrode showed good stability, high selectivity and satisfactory anti-interference ability. Finally, the developed method was successfully applied for the determination of carbendazim traces in spiked tap and river water samples.
T2  - Journal of the Serbian Chemical Society
T1  - A novel carbon paste electrode based on nitrogen-doped hydrothermal carbon for electrochemical determination of carbendazim
VL  - 82
IS  - 11
SP  - 1259
EP  - 1272
DO  - 10.2298/JSC161228053K
ER  - 

@article{
author = "Kalijadis, Ana and Đorđević, Jelena S. and Papp, Zsigmond and Jokić, Bojan M. and Spasojević, Vuk D. and Babić, Biljana M. and Trtić-Petrović, Tatjana M.",
year = "2017",
abstract = "In this work, a new carbon paste electrode, prepared from nitrogen-doped hydrothermal carbon (CHTCN) was applied for the electrochemical detection and determination of carbendazim fungicide. CHTCN samples with the nominal nitrogen content 0.05-0.5 wt. % in glucose precursor were prepared by simple, low-cost synthesis with the accompanying carbonization to 1273 K. The presence of nitrogen in CHTCN samples was confirmed by elemental analysis. Characterization of CHTCN as material for carbon paste electrode was achieved by cyclic voltammetry measurement of the Fe(CN)(6)(3-/4-) redox couple. The results showed that best electrochemical response was obtained from the sample with a nominal nitrogen concentration of 0.1 wt. % and with tricresyl phosphate as a binder. During the development of a differential pulse stripping voltammetric method for carbendazim determination applying new electrode, the following experimental parameters were studied: the sort and amount of binding liquid, the effect of pH, accumulation potential and accumulation time. Under optimal conditions, the electrode offered linearity in the wide concentration range from 25 to 490 ng cm(-3) and an estimated detection limit of 1.21 ng cm(-3). Moreover, the electrode showed good stability, high selectivity and satisfactory anti-interference ability. Finally, the developed method was successfully applied for the determination of carbendazim traces in spiked tap and river water samples.",
journal = "Journal of the Serbian Chemical Society",
title = "A novel carbon paste electrode based on nitrogen-doped hydrothermal carbon for electrochemical determination of carbendazim",
volume = "82",
number = "11",
pages = "1259-1272",
doi = "10.2298/JSC161228053K"
}

Kalijadis, A., Đorđević, J. S., Papp, Z., Jokić, B. M., Spasojević, V. D., Babić, B. M.,& Trtić-Petrović, T. M.. (2017). A novel carbon paste electrode based on nitrogen-doped hydrothermal carbon for electrochemical determination of carbendazim. in Journal of the Serbian Chemical Society, 82(11), 1259-1272.
https://doi.org/10.2298/JSC161228053K

Kalijadis A, Đorđević JS, Papp Z, Jokić BM, Spasojević VD, Babić BM, Trtić-Petrović TM. A novel carbon paste electrode based on nitrogen-doped hydrothermal carbon for electrochemical determination of carbendazim. in Journal of the Serbian Chemical Society. 2017;82(11):1259-1272.
doi:10.2298/JSC161228053K .

Kalijadis, Ana, Đorđević, Jelena S., Papp, Zsigmond, Jokić, Bojan M., Spasojević, Vuk D., Babić, Biljana M., Trtić-Petrović, Tatjana M., "A novel carbon paste electrode based on nitrogen-doped hydrothermal carbon for electrochemical determination of carbendazim" in Journal of the Serbian Chemical Society, 82, no. 11 (2017):1259-1272,
https://doi.org/10.2298/JSC161228053K . .

TY  - JOUR
AU  - Potočnik, Jelena
AU  - Nenadović, Miloš
AU  - Jokić, Bojan M.
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1513
AB  - In this work, Glancing Angle Deposition technique was used for obtaining nanostructured nickel thin film with vertical posts on glass substrate which was positioned 75 degrees with respect to the substrate normal and rotated with a suitable constant speed. The obtained nickel thin film was characterized by Scanning Electron Microscopy, Atomic Force Microscopy and X-ray Photoelectron Spectroscopy. It was found that the deposited thin film consists of 94.0 at.% of nickel. Magnetic properties of the deposited thin film were determined by Magneto-Optical Kerr Effect Microscopy. According to the obtained coercivity values, it can be concluded that the nickel thin film shows uniaxial magnetic anisotropy.
T2  - Science of Sintering
T1  - Structural, Chemical and Magnetic Properties of Nickel Vertical Posts Obtained by Glancing Angle Deposition Technique
VL  - 49
IS  - 1
SP  - 73
EP  - 79
DO  - 10.2298/SOS1701073P
ER  - 

@article{
author = "Potočnik, Jelena and Nenadović, Miloš and Jokić, Bojan M. and Popović, Maja and Rakočević, Zlatko Lj.",
year = "2017",
abstract = "In this work, Glancing Angle Deposition technique was used for obtaining nanostructured nickel thin film with vertical posts on glass substrate which was positioned 75 degrees with respect to the substrate normal and rotated with a suitable constant speed. The obtained nickel thin film was characterized by Scanning Electron Microscopy, Atomic Force Microscopy and X-ray Photoelectron Spectroscopy. It was found that the deposited thin film consists of 94.0 at.% of nickel. Magnetic properties of the deposited thin film were determined by Magneto-Optical Kerr Effect Microscopy. According to the obtained coercivity values, it can be concluded that the nickel thin film shows uniaxial magnetic anisotropy.",
journal = "Science of Sintering",
title = "Structural, Chemical and Magnetic Properties of Nickel Vertical Posts Obtained by Glancing Angle Deposition Technique",
volume = "49",
number = "1",
pages = "73-79",
doi = "10.2298/SOS1701073P"
}

Potočnik, J., Nenadović, M., Jokić, B. M., Popović, M.,& Rakočević, Z. Lj.. (2017). Structural, Chemical and Magnetic Properties of Nickel Vertical Posts Obtained by Glancing Angle Deposition Technique. in Science of Sintering, 49(1), 73-79.
https://doi.org/10.2298/SOS1701073P

Potočnik J, Nenadović M, Jokić BM, Popović M, Rakočević ZL. Structural, Chemical and Magnetic Properties of Nickel Vertical Posts Obtained by Glancing Angle Deposition Technique. in Science of Sintering. 2017;49(1):73-79.
doi:10.2298/SOS1701073P .

Potočnik, Jelena, Nenadović, Miloš, Jokić, Bojan M., Popović, Maja, Rakočević, Zlatko Lj., "Structural, Chemical and Magnetic Properties of Nickel Vertical Posts Obtained by Glancing Angle Deposition Technique" in Science of Sintering, 49, no. 1 (2017):73-79,
https://doi.org/10.2298/SOS1701073P . .

TY  - JOUR
AU  - Ahribesh, Aysha Ali
AU  - Lazarevic, Slavica
AU  - Jankovic-Častvan, Ivona
AU  - Jokić, Bojan M.
AU  - Spasojević, Vojislav
AU  - Radetić, Tamara
AU  - Janaćković, Đorđe T.
AU  - Petrović, Rada
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1349
AB  - The magnetic nanocomposites (MNCs), used as adsorbents for Cd2+ ions, were prepared by a co-precipitation method using both the untreated natural (SEP) and the partially acid-activated (ASEP) sepiolites as supports for magnetite. The synthesis conditions differed as follows: NaOH or NH3 was added in the SEP or the ASEP suspension before or after the addition of Fe3 and Fe2+. The SEP-based MNCs prepared using NaOH had a lower magnetization, but higher adsorption capacities than the MNCs synthesized using NH3. The order of the mixing of the reagents had a small influence on the properties of SEP-based MNCs, especially when NaOH was used for the synthesis. Due to acidity of the surface functional groups of the ASEP, the magnetic composite could be synthesized only when NH3 was added in the suspension of ASEP having Fe3+ and Fe2+ ions. Despite of the worse dispersibility of the magnetic particles, the adsorption capacityof the ASEP-based composite was higher than of the MNC with SEP prepared by the same procedure. All the MNCs showed a superparamagnetic behavior at room temperature and the adsorption capacities were higher than of pure compounds. The adsorption of Cd2+ on the composites was best fitted with the Sips model, which suggested the chemisorption on the heterogeneous surface at energetically non-uniform sites until a monolayer was formed. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Powder Technology
T1  - Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents
VL  - 305
SP  - 260
EP  - 269
DO  - 10.1016/j.powtec.2016.09.086
ER  - 

@article{
author = "Ahribesh, Aysha Ali and Lazarevic, Slavica and Jankovic-Častvan, Ivona and Jokić, Bojan M. and Spasojević, Vojislav and Radetić, Tamara and Janaćković, Đorđe T. and Petrović, Rada",
year = "2017",
abstract = "The magnetic nanocomposites (MNCs), used as adsorbents for Cd2+ ions, were prepared by a co-precipitation method using both the untreated natural (SEP) and the partially acid-activated (ASEP) sepiolites as supports for magnetite. The synthesis conditions differed as follows: NaOH or NH3 was added in the SEP or the ASEP suspension before or after the addition of Fe3 and Fe2+. The SEP-based MNCs prepared using NaOH had a lower magnetization, but higher adsorption capacities than the MNCs synthesized using NH3. The order of the mixing of the reagents had a small influence on the properties of SEP-based MNCs, especially when NaOH was used for the synthesis. Due to acidity of the surface functional groups of the ASEP, the magnetic composite could be synthesized only when NH3 was added in the suspension of ASEP having Fe3+ and Fe2+ ions. Despite of the worse dispersibility of the magnetic particles, the adsorption capacityof the ASEP-based composite was higher than of the MNC with SEP prepared by the same procedure. All the MNCs showed a superparamagnetic behavior at room temperature and the adsorption capacities were higher than of pure compounds. The adsorption of Cd2+ on the composites was best fitted with the Sips model, which suggested the chemisorption on the heterogeneous surface at energetically non-uniform sites until a monolayer was formed. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Powder Technology",
title = "Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents",
volume = "305",
pages = "260-269",
doi = "10.1016/j.powtec.2016.09.086"
}

Ahribesh, A. A., Lazarevic, S., Jankovic-Častvan, I., Jokić, B. M., Spasojević, V., Radetić, T., Janaćković, Đ. T.,& Petrović, R.. (2017). Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents. in Powder Technology, 305, 260-269.
https://doi.org/10.1016/j.powtec.2016.09.086

Ahribesh AA, Lazarevic S, Jankovic-Častvan I, Jokić BM, Spasojević V, Radetić T, Janaćković ĐT, Petrović R. Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents. in Powder Technology. 2017;305:260-269.
doi:10.1016/j.powtec.2016.09.086 .

Ahribesh, Aysha Ali, Lazarevic, Slavica, Jankovic-Častvan, Ivona, Jokić, Bojan M., Spasojević, Vojislav, Radetić, Tamara, Janaćković, Đorđe T., Petrović, Rada, "Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents" in Powder Technology, 305 (2017):260-269,
https://doi.org/10.1016/j.powtec.2016.09.086 . .

TY  - JOUR
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Milović, Miloš
AU  - Cvjetićanin, Nikola
AU  - Jokić, Bojan M.
AU  - Umićević, Ana
AU  - Uskoković, Dragan
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1401
AB  - Low intrinsic electronic conductivity is the main disadvantage of LiFePO4 when used as a cathode material in lithium ion batteries. The paper offers experimental proofs of the theoretical prediction that fluorine doping of LiFePO4 can enhance its electrical conductivity. The LiFePO4 and fluorine-doped LiFePO4 olivine type, carbon free powders are synthesized and examined. The crystal structure refinements in the Pnma space group reveal that doping with fluorine ions preserves the olivine structure, while reducing both the lattice parameters and the antisite defect, and increasing the crystallite size. A small amount of incorporated fluorine enhances the electrical conductivity from 4.6x10(-7) S cm(-1) to 2.3x10(-6) S cm(-1) and has a positive impact on the electrochemical performance. Several spectroscopy techniques (Mossbauer, FTIR, and Raman) reveal differences between the two powders and additionally support the findings of both the Rietveld refinement and the conductivity measurements.
T2  - Ceramics International
T1  - The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder
VL  - 43
IS  - 3
SP  - 3224
EP  - 3230
DO  - 10.1016/j.ceramint.2016.11.149
ER  - 

@article{
author = "Jugović, Dragana and Mitrić, Miodrag and Milović, Miloš and Cvjetićanin, Nikola and Jokić, Bojan M. and Umićević, Ana and Uskoković, Dragan",
year = "2017",
abstract = "Low intrinsic electronic conductivity is the main disadvantage of LiFePO4 when used as a cathode material in lithium ion batteries. The paper offers experimental proofs of the theoretical prediction that fluorine doping of LiFePO4 can enhance its electrical conductivity. The LiFePO4 and fluorine-doped LiFePO4 olivine type, carbon free powders are synthesized and examined. The crystal structure refinements in the Pnma space group reveal that doping with fluorine ions preserves the olivine structure, while reducing both the lattice parameters and the antisite defect, and increasing the crystallite size. A small amount of incorporated fluorine enhances the electrical conductivity from 4.6x10(-7) S cm(-1) to 2.3x10(-6) S cm(-1) and has a positive impact on the electrochemical performance. Several spectroscopy techniques (Mossbauer, FTIR, and Raman) reveal differences between the two powders and additionally support the findings of both the Rietveld refinement and the conductivity measurements.",
journal = "Ceramics International",
title = "The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder",
volume = "43",
number = "3",
pages = "3224-3230",
doi = "10.1016/j.ceramint.2016.11.149"
}

Jugović, D., Mitrić, M., Milović, M., Cvjetićanin, N., Jokić, B. M., Umićević, A.,& Uskoković, D.. (2017). The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder. in Ceramics International, 43(3), 3224-3230.
https://doi.org/10.1016/j.ceramint.2016.11.149

Jugović D, Mitrić M, Milović M, Cvjetićanin N, Jokić BM, Umićević A, Uskoković D. The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder. in Ceramics International. 2017;43(3):3224-3230.
doi:10.1016/j.ceramint.2016.11.149 .

Jugović, Dragana, Mitrić, Miodrag, Milović, Miloš, Cvjetićanin, Nikola, Jokić, Bojan M., Umićević, Ana, Uskoković, Dragan, "The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder" in Ceramics International, 43, no. 3 (2017):3224-3230,
https://doi.org/10.1016/j.ceramint.2016.11.149 . .

TY  - JOUR
AU  - Prekajski, Marija D.
AU  - Jokić, Bojan M.
AU  - Kalijadis, Ana
AU  - Maletaškić, Jelena
AU  - Stanković, Nadežda
AU  - Luković, Jelena M.
AU  - Matović, Branko
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1328
AB  - Nanoemulsion technique, based on Ouzo effect, was applied for synthesis of the pure and silver doped (2.5 and 5 mol%) calcium hydroxyapatite (HAp). After calcination at 500 degrees C fully crystallized powders were obtained. X-ray powder diffraction analysis accompanied with Rietveld refinement revealed that the synthesized powders were single-phase hydroxyapatite. Raman spectroscopy also confirmed that the synthesized powders were single-phase. The obtained HAp particles were spherical in shape and their sizes were in the nanometer range which was revealed by field emission scanning electron microscopy analysis (FESEM). The successful synthesis of the single-phase Ag doped HAp showed that nanoemulsion method is a simple technique for obtaining pure and doped hydroxyapatite nanospheres.
T2  - Processing and Application of Ceramics
T1  - Synthesis of silver doped hydroxyapatite nanospheres using Ouzo effect
VL  - 10
IS  - 3
SP  - 169
EP  - 174
DO  - 10.2298/PAC1603169P
ER  - 

@article{
author = "Prekajski, Marija D. and Jokić, Bojan M. and Kalijadis, Ana and Maletaškić, Jelena and Stanković, Nadežda and Luković, Jelena M. and Matović, Branko",
year = "2016",
abstract = "Nanoemulsion technique, based on Ouzo effect, was applied for synthesis of the pure and silver doped (2.5 and 5 mol%) calcium hydroxyapatite (HAp). After calcination at 500 degrees C fully crystallized powders were obtained. X-ray powder diffraction analysis accompanied with Rietveld refinement revealed that the synthesized powders were single-phase hydroxyapatite. Raman spectroscopy also confirmed that the synthesized powders were single-phase. The obtained HAp particles were spherical in shape and their sizes were in the nanometer range which was revealed by field emission scanning electron microscopy analysis (FESEM). The successful synthesis of the single-phase Ag doped HAp showed that nanoemulsion method is a simple technique for obtaining pure and doped hydroxyapatite nanospheres.",
journal = "Processing and Application of Ceramics",
title = "Synthesis of silver doped hydroxyapatite nanospheres using Ouzo effect",
volume = "10",
number = "3",
pages = "169-174",
doi = "10.2298/PAC1603169P"
}

Prekajski, M. D., Jokić, B. M., Kalijadis, A., Maletaškić, J., Stanković, N., Luković, J. M.,& Matović, B.. (2016). Synthesis of silver doped hydroxyapatite nanospheres using Ouzo effect. in Processing and Application of Ceramics, 10(3), 169-174.
https://doi.org/10.2298/PAC1603169P

Prekajski MD, Jokić BM, Kalijadis A, Maletaškić J, Stanković N, Luković JM, Matović B. Synthesis of silver doped hydroxyapatite nanospheres using Ouzo effect. in Processing and Application of Ceramics. 2016;10(3):169-174.
doi:10.2298/PAC1603169P .

Prekajski, Marija D., Jokić, Bojan M., Kalijadis, Ana, Maletaškić, Jelena, Stanković, Nadežda, Luković, Jelena M., Matović, Branko, "Synthesis of silver doped hydroxyapatite nanospheres using Ouzo effect" in Processing and Application of Ceramics, 10, no. 3 (2016):169-174,
https://doi.org/10.2298/PAC1603169P . .

TY  - JOUR
AU  - Dmitrović, Svetlana
AU  - Jokić, Bojan M.
AU  - Prekajski, Marija D.
AU  - Pantić, Jelena R.
AU  - Zmejkoski, Danica
AU  - Zarubica, Aleksandra R.
AU  - Matović, Branko
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1172
AB  - Spider silk poses excellent mechanical properties, tenacity and elasticity and it has been used as a template for calcite mineralization to improve load bearing strength of osteoconductive calcite. The samples were obtained by mimicking biomineralization for five days in order to follow formation and growth of calcite on the surface of spider silk. Crystal phase was detected by XRD and FTIR spectroscopy. Microstructure, crystal size and its morphology were studied by means of FESEM. After two days of processing, pure calcite phase was obtained, and a size of the formed crystals increased with prolongation of biomineralization.
T2  - Processing and Application of Ceramics
T1  - Synthesis and characterization of spider silk calcite composite
VL  - 10
IS  - 1
SP  - 37
EP  - 40
DO  - 10.2298/PAC1601037D
ER  - 

@article{
author = "Dmitrović, Svetlana and Jokić, Bojan M. and Prekajski, Marija D. and Pantić, Jelena R. and Zmejkoski, Danica and Zarubica, Aleksandra R. and Matović, Branko",
year = "2016",
abstract = "Spider silk poses excellent mechanical properties, tenacity and elasticity and it has been used as a template for calcite mineralization to improve load bearing strength of osteoconductive calcite. The samples were obtained by mimicking biomineralization for five days in order to follow formation and growth of calcite on the surface of spider silk. Crystal phase was detected by XRD and FTIR spectroscopy. Microstructure, crystal size and its morphology were studied by means of FESEM. After two days of processing, pure calcite phase was obtained, and a size of the formed crystals increased with prolongation of biomineralization.",
journal = "Processing and Application of Ceramics",
title = "Synthesis and characterization of spider silk calcite composite",
volume = "10",
number = "1",
pages = "37-40",
doi = "10.2298/PAC1601037D"
}

Dmitrović, S., Jokić, B. M., Prekajski, M. D., Pantić, J. R., Zmejkoski, D., Zarubica, A. R.,& Matović, B.. (2016). Synthesis and characterization of spider silk calcite composite. in Processing and Application of Ceramics, 10(1), 37-40.
https://doi.org/10.2298/PAC1601037D

Dmitrović S, Jokić BM, Prekajski MD, Pantić JR, Zmejkoski D, Zarubica AR, Matović B. Synthesis and characterization of spider silk calcite composite. in Processing and Application of Ceramics. 2016;10(1):37-40.
doi:10.2298/PAC1601037D .

Dmitrović, Svetlana, Jokić, Bojan M., Prekajski, Marija D., Pantić, Jelena R., Zmejkoski, Danica, Zarubica, Aleksandra R., Matović, Branko, "Synthesis and characterization of spider silk calcite composite" in Processing and Application of Ceramics, 10, no. 1 (2016):37-40,
https://doi.org/10.2298/PAC1601037D . .

TY  - CONF
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Milović, Miloš
AU  - Cvjetićanin, Nikola
AU  - Jokić, Bojan M.
AU  - Umićević, Ana
AU  - Uskoković, Dragan
PY  - 2016
UR  - http://dais.sanu.ac.rs/123456789/898
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7555
AB  - Low intrinsic electronic conductivity is the main weakness of LiFePO4 for the use as cathode material in lithium ion batteries. Here is presented an experimental proof of the theoretical prediction that fluorine doping of LiFePO4 can enhance its electrical conductivity. LiFePO4 and fluorine-doped LiFePO4 olivine type, carbon-free powders are synthesized and examined. Crystal structure refinements in the space group Pnma reveal that doping with fluorine ions preserves olivine structure with the reduction of both the lattice parameters and the antisite defect, and an increase of a crystallite size. A small amount of incorporated fluorine enhances electrical conductivity from 4.6 × 10-7 Scm-1 to 2.3 × 10-6 Scm-1 and has positive impact on the electrochemical performances. Several spectroscopy techniques (Mössbauer, FTIR, and Raman) disclose differences between two powders and additionally support the findings of both the Rietveld refinement and the conductivity measurements.
PB  - Belgrade : Materials Research Society of Serbia
C3  - YUCOMAT 2016 : 18th Annual Conference YUCOMAT 2016 : programme and the book of abstracts; September 5-10, Herceg Novi
T1  - The influence of fluorine doping on the structural and the electrical properties of LiFePO4 powder
SP  - 35
EP  - 35
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7555
ER  - 

@conference{
author = "Jugović, Dragana and Mitrić, Miodrag and Milović, Miloš and Cvjetićanin, Nikola and Jokić, Bojan M. and Umićević, Ana and Uskoković, Dragan",
year = "2016",
abstract = "Low intrinsic electronic conductivity is the main weakness of LiFePO4 for the use as cathode material in lithium ion batteries. Here is presented an experimental proof of the theoretical prediction that fluorine doping of LiFePO4 can enhance its electrical conductivity. LiFePO4 and fluorine-doped LiFePO4 olivine type, carbon-free powders are synthesized and examined. Crystal structure refinements in the space group Pnma reveal that doping with fluorine ions preserves olivine structure with the reduction of both the lattice parameters and the antisite defect, and an increase of a crystallite size. A small amount of incorporated fluorine enhances electrical conductivity from 4.6 × 10-7 Scm-1 to 2.3 × 10-6 Scm-1 and has positive impact on the electrochemical performances. Several spectroscopy techniques (Mössbauer, FTIR, and Raman) disclose differences between two powders and additionally support the findings of both the Rietveld refinement and the conductivity measurements.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "YUCOMAT 2016 : 18th Annual Conference YUCOMAT 2016 : programme and the book of abstracts; September 5-10, Herceg Novi",
title = "The influence of fluorine doping on the structural and the electrical properties of LiFePO4 powder",
pages = "35-35",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7555"
}

Jugović, D., Mitrić, M., Milović, M., Cvjetićanin, N., Jokić, B. M., Umićević, A.,& Uskoković, D.. (2016). The influence of fluorine doping on the structural and the electrical properties of LiFePO4 powder. in YUCOMAT 2016 : 18th Annual Conference YUCOMAT 2016 : programme and the book of abstracts; September 5-10, Herceg Novi
Belgrade : Materials Research Society of Serbia., 35-35.
https://hdl.handle.net/21.15107/rcub_vinar_7555

Jugović D, Mitrić M, Milović M, Cvjetićanin N, Jokić BM, Umićević A, Uskoković D. The influence of fluorine doping on the structural and the electrical properties of LiFePO4 powder. in YUCOMAT 2016 : 18th Annual Conference YUCOMAT 2016 : programme and the book of abstracts; September 5-10, Herceg Novi. 2016;:35-35.
https://hdl.handle.net/21.15107/rcub_vinar_7555 .

Jugović, Dragana, Mitrić, Miodrag, Milović, Miloš, Cvjetićanin, Nikola, Jokić, Bojan M., Umićević, Ana, Uskoković, Dragan, "The influence of fluorine doping on the structural and the electrical properties of LiFePO4 powder" in YUCOMAT 2016 : 18th Annual Conference YUCOMAT 2016 : programme and the book of abstracts; September 5-10, Herceg Novi (2016):35-35,
https://hdl.handle.net/21.15107/rcub_vinar_7555 .

TY  - JOUR
AU  - Savić, Andrija B.
AU  - Čokeša, Đuro
AU  - Lazarevic, Slavica
AU  - Jokić, Bojan M.
AU  - Janaćković, Đorđe T.
AU  - Petrović, Rada
AU  - Živković, Ljiljana
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1262
AB  - This study demonstrates that PEG-assisted hydrothermal synthesis provides a convenient and eco-friendly route to fabrication of mesoporous magnetite with enhanced capacity for phosphate removal, excellent potential for magnetic separation and good reusability. Adsorption of phosphate onto 4 laboratory prepared magnetite powders was investigated in a systematic manner. Powders were synthesized in poly(ethylene) glycol-free or assisted conditions (PEGs 400 and 20,000 at varied PEG/water ratio), and characterized in terms of crystalline structure, and magnetic, morphological, textural, and acid-base properties. PEG acted as a powerful pore forming agent, the PEG/water ratio being the key factor in developing the surface area and mesoporosity of magnetite. Uptake capacity for phosphates increased with an increase in surface area and pore volume. PEG 20,000 at a ratio of 3:1 gave the best result. This mesoporous (D-max = 11 nm), nano-scale ( LT 10 nm) magnetite was ca. 9 times more efficient than nonporous micrometric powder derived from PEG-free synthesis (Langmuir maximum capacity, q(m) = 26.2 vs. 3.0 mg g(-1)). The adsorption was pH-dependent, in accord with variations in zeta potential of magnetite. Opposite shifts of isoelectric point and point of zero charge confirmed specific adsorption of phosphates at water/magnetite interface which proceeded via replacement of surface hydroxyls and sulfates. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Powder Technology
T1  - Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process
VL  - 301
SP  - 511
EP  - 519
DO  - 10.1016/j.powtec.2016.06.028
ER  - 

@article{
author = "Savić, Andrija B. and Čokeša, Đuro and Lazarevic, Slavica and Jokić, Bojan M. and Janaćković, Đorđe T. and Petrović, Rada and Živković, Ljiljana",
year = "2016",
abstract = "This study demonstrates that PEG-assisted hydrothermal synthesis provides a convenient and eco-friendly route to fabrication of mesoporous magnetite with enhanced capacity for phosphate removal, excellent potential for magnetic separation and good reusability. Adsorption of phosphate onto 4 laboratory prepared magnetite powders was investigated in a systematic manner. Powders were synthesized in poly(ethylene) glycol-free or assisted conditions (PEGs 400 and 20,000 at varied PEG/water ratio), and characterized in terms of crystalline structure, and magnetic, morphological, textural, and acid-base properties. PEG acted as a powerful pore forming agent, the PEG/water ratio being the key factor in developing the surface area and mesoporosity of magnetite. Uptake capacity for phosphates increased with an increase in surface area and pore volume. PEG 20,000 at a ratio of 3:1 gave the best result. This mesoporous (D-max = 11 nm), nano-scale ( LT 10 nm) magnetite was ca. 9 times more efficient than nonporous micrometric powder derived from PEG-free synthesis (Langmuir maximum capacity, q(m) = 26.2 vs. 3.0 mg g(-1)). The adsorption was pH-dependent, in accord with variations in zeta potential of magnetite. Opposite shifts of isoelectric point and point of zero charge confirmed specific adsorption of phosphates at water/magnetite interface which proceeded via replacement of surface hydroxyls and sulfates. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Powder Technology",
title = "Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process",
volume = "301",
pages = "511-519",
doi = "10.1016/j.powtec.2016.06.028"
}

Savić, A. B., Čokeša, Đ., Lazarevic, S., Jokić, B. M., Janaćković, Đ. T., Petrović, R.,& Živković, L.. (2016). Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process. in Powder Technology, 301, 511-519.
https://doi.org/10.1016/j.powtec.2016.06.028

Savić AB, Čokeša Đ, Lazarevic S, Jokić BM, Janaćković ĐT, Petrović R, Živković L. Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process. in Powder Technology. 2016;301:511-519.
doi:10.1016/j.powtec.2016.06.028 .

Savić, Andrija B., Čokeša, Đuro, Lazarevic, Slavica, Jokić, Bojan M., Janaćković, Đorđe T., Petrović, Rada, Živković, Ljiljana, "Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process" in Powder Technology, 301 (2016):511-519,
https://doi.org/10.1016/j.powtec.2016.06.028 . .

TY  - JOUR
AU  - Prekajski-Đorđević, Marija D.
AU  - Zarubica, Aleksandra R.
AU  - Babić, Biljana M.
AU  - Jokić, Bojan M.
AU  - Pantić, Jelena R.
AU  - Luković, Jelena M.
AU  - Matović, Branko
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/824
AB  - Simple route was used for synthesis of nanostructured titania samples doped with 3 and 6 mol% of Cr3+ Titanium(IV)-isopropoxide and water were used as starting materials and as an agents for controlling hydrolysis and condensation reactions. The phase evolution of titania (TiO2) was followed by calcination at 400, 600 and 800 degrees C. The synthesized powders were examined by field emission scanning electron microscopy (FESEM), and X-ray diffraction (XRD). Single-phase anatase was obtained at low temperature (400 degrees C) in all cases. The photocatalytic activity of TiO2 doped nanopowders was evaluated by the photocatalytic degradation of crystal violet in aqueous solution. The present study indicates that this simple synthesis method can be an effective route to produce efficient photoactive doped anatase nanopowders. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
PB  - Elsevier
T2  - Ceramics International
T1  - Synthesis and characterization of Cr3+ doped TiO2 nanometric powders
VL  - 42
IS  - 1
SP  - 1862
EP  - 1869
DO  - 10.1016/j.ceramint.2015.09.151
ER  - 

@article{
author = "Prekajski-Đorđević, Marija D. and Zarubica, Aleksandra R. and Babić, Biljana M. and Jokić, Bojan M. and Pantić, Jelena R. and Luković, Jelena M. and Matović, Branko",
year = "2016",
abstract = "Simple route was used for synthesis of nanostructured titania samples doped with 3 and 6 mol% of Cr3+ Titanium(IV)-isopropoxide and water were used as starting materials and as an agents for controlling hydrolysis and condensation reactions. The phase evolution of titania (TiO2) was followed by calcination at 400, 600 and 800 degrees C. The synthesized powders were examined by field emission scanning electron microscopy (FESEM), and X-ray diffraction (XRD). Single-phase anatase was obtained at low temperature (400 degrees C) in all cases. The photocatalytic activity of TiO2 doped nanopowders was evaluated by the photocatalytic degradation of crystal violet in aqueous solution. The present study indicates that this simple synthesis method can be an effective route to produce efficient photoactive doped anatase nanopowders. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Synthesis and characterization of Cr3+ doped TiO2 nanometric powders",
volume = "42",
number = "1",
pages = "1862-1869",
doi = "10.1016/j.ceramint.2015.09.151"
}

Prekajski-Đorđević, M. D., Zarubica, A. R., Babić, B. M., Jokić, B. M., Pantić, J. R., Luković, J. M.,& Matović, B.. (2016). Synthesis and characterization of Cr3+ doped TiO2 nanometric powders. in Ceramics International
Elsevier., 42(1), 1862-1869.
https://doi.org/10.1016/j.ceramint.2015.09.151

Prekajski-Đorđević MD, Zarubica AR, Babić BM, Jokić BM, Pantić JR, Luković JM, Matović B. Synthesis and characterization of Cr3+ doped TiO2 nanometric powders. in Ceramics International. 2016;42(1):1862-1869.
doi:10.1016/j.ceramint.2015.09.151 .

Prekajski-Đorđević, Marija D., Zarubica, Aleksandra R., Babić, Biljana M., Jokić, Bojan M., Pantić, Jelena R., Luković, Jelena M., Matović, Branko, "Synthesis and characterization of Cr3+ doped TiO2 nanometric powders" in Ceramics International, 42, no. 1 (2016):1862-1869,
https://doi.org/10.1016/j.ceramint.2015.09.151 . .

TY  - JOUR
AU  - Babić, Biljana M.
AU  - Zarubica, Aleksandra R.
AU  - Minović-Arsić, Tamara
AU  - Pantić, Jelena R.
AU  - Jokić, Bojan M.
AU  - Abazović, Nadica
AU  - Matović, Branko
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1133
AB  - Titanium dioxide nanopowders, doped with different amount of Fe3+ ions (0.3-5.0 mass%), were synthesized by acid-catalyzed sol-gel method in a non-aqueous medium. The obtained powders were characterized by field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectrometry (EDX) and UV/vis spectroscopy. Degradation reaction of crystal violet (CV) azo dye is used to test the photocatalytic activity of iron doped titanium dioxide nanopowders. The results are correlated with previous investigations about the structure and physico-chemical characteristics of obtained nanopowders. (C) 2015 Elsevier Ltd. All rights reserved.
T2  - Journal of the European Ceramic Society
T1  - Iron doped anatase for application in photocatalysis
VL  - 36
IS  - 12
SP  - 2991
EP  - 2996
DO  - 10.1016/j.jeurceramsoc.2015.11.031
ER  - 

@article{
author = "Babić, Biljana M. and Zarubica, Aleksandra R. and Minović-Arsić, Tamara and Pantić, Jelena R. and Jokić, Bojan M. and Abazović, Nadica and Matović, Branko",
year = "2016",
abstract = "Titanium dioxide nanopowders, doped with different amount of Fe3+ ions (0.3-5.0 mass%), were synthesized by acid-catalyzed sol-gel method in a non-aqueous medium. The obtained powders were characterized by field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectrometry (EDX) and UV/vis spectroscopy. Degradation reaction of crystal violet (CV) azo dye is used to test the photocatalytic activity of iron doped titanium dioxide nanopowders. The results are correlated with previous investigations about the structure and physico-chemical characteristics of obtained nanopowders. (C) 2015 Elsevier Ltd. All rights reserved.",
journal = "Journal of the European Ceramic Society",
title = "Iron doped anatase for application in photocatalysis",
volume = "36",
number = "12",
pages = "2991-2996",
doi = "10.1016/j.jeurceramsoc.2015.11.031"
}

Babić, B. M., Zarubica, A. R., Minović-Arsić, T., Pantić, J. R., Jokić, B. M., Abazović, N.,& Matović, B.. (2016). Iron doped anatase for application in photocatalysis. in Journal of the European Ceramic Society, 36(12), 2991-2996.
https://doi.org/10.1016/j.jeurceramsoc.2015.11.031

Babić BM, Zarubica AR, Minović-Arsić T, Pantić JR, Jokić BM, Abazović N, Matović B. Iron doped anatase for application in photocatalysis. in Journal of the European Ceramic Society. 2016;36(12):2991-2996.
doi:10.1016/j.jeurceramsoc.2015.11.031 .

Babić, Biljana M., Zarubica, Aleksandra R., Minović-Arsić, Tamara, Pantić, Jelena R., Jokić, Bojan M., Abazović, Nadica, Matović, Branko, "Iron doped anatase for application in photocatalysis" in Journal of the European Ceramic Society, 36, no. 12 (2016):2991-2996,
https://doi.org/10.1016/j.jeurceramsoc.2015.11.031 . .

TY  - JOUR
AU  - Minović-Arsić, Tamara
AU  - Kalijadis, Ana
AU  - Matović, Branko
AU  - Stoiljković, Milovan
AU  - Pantić, Jelena R.
AU  - Jovanović, Jovan
AU  - Petrović, Rada
AU  - Jokić, Bojan M.
AU  - Babić, Biljana M.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1171
AB  - Carbon cryogel/ceria composite, with 10 wt.% of ceria, was synthesized by mixing of ceria and carbon cryogel (CC). The sample was characterized by field emission scanning electron microscopy, nitrogen adsorption and X-ray diffraction. The adsorption of arsenic(III) ions from aqueous solutions on carbon cryogel/ceria nanocomposite was studied as a function of time, solution pH and As(III) ion concentration. The results are correlated with previous investigations of adsorption mechanism of arsenic(III) on carbon cryogel. Adsorption dose experiments showed that the mass of the adsorbent was reduced for 20 times, in comparison with pure CC, for the same amount of adsorbed arsenic(III) ions. BET isotherm was used to interpret the experimental data for modelling liquid phase adsorption.
T2  - Processing and Application of Ceramics
T1  - Arsenic(III) adsorption from aqueous solutions on novel carbon cryogel/ceria nanocomposite
VL  - 10
IS  - 1
SP  - 17
EP  - 23
DO  - 10.2298/PAC1601017M
ER  - 

@article{
author = "Minović-Arsić, Tamara and Kalijadis, Ana and Matović, Branko and Stoiljković, Milovan and Pantić, Jelena R. and Jovanović, Jovan and Petrović, Rada and Jokić, Bojan M. and Babić, Biljana M.",
year = "2016",
abstract = "Carbon cryogel/ceria composite, with 10 wt.% of ceria, was synthesized by mixing of ceria and carbon cryogel (CC). The sample was characterized by field emission scanning electron microscopy, nitrogen adsorption and X-ray diffraction. The adsorption of arsenic(III) ions from aqueous solutions on carbon cryogel/ceria nanocomposite was studied as a function of time, solution pH and As(III) ion concentration. The results are correlated with previous investigations of adsorption mechanism of arsenic(III) on carbon cryogel. Adsorption dose experiments showed that the mass of the adsorbent was reduced for 20 times, in comparison with pure CC, for the same amount of adsorbed arsenic(III) ions. BET isotherm was used to interpret the experimental data for modelling liquid phase adsorption.",
journal = "Processing and Application of Ceramics",
title = "Arsenic(III) adsorption from aqueous solutions on novel carbon cryogel/ceria nanocomposite",
volume = "10",
number = "1",
pages = "17-23",
doi = "10.2298/PAC1601017M"
}

Minović-Arsić, T., Kalijadis, A., Matović, B., Stoiljković, M., Pantić, J. R., Jovanović, J., Petrović, R., Jokić, B. M.,& Babić, B. M.. (2016). Arsenic(III) adsorption from aqueous solutions on novel carbon cryogel/ceria nanocomposite. in Processing and Application of Ceramics, 10(1), 17-23.
https://doi.org/10.2298/PAC1601017M

Minović-Arsić T, Kalijadis A, Matović B, Stoiljković M, Pantić JR, Jovanović J, Petrović R, Jokić BM, Babić BM. Arsenic(III) adsorption from aqueous solutions on novel carbon cryogel/ceria nanocomposite. in Processing and Application of Ceramics. 2016;10(1):17-23.
doi:10.2298/PAC1601017M .

Minović-Arsić, Tamara, Kalijadis, Ana, Matović, Branko, Stoiljković, Milovan, Pantić, Jelena R., Jovanović, Jovan, Petrović, Rada, Jokić, Bojan M., Babić, Biljana M., "Arsenic(III) adsorption from aqueous solutions on novel carbon cryogel/ceria nanocomposite" in Processing and Application of Ceramics, 10, no. 1 (2016):17-23,
https://doi.org/10.2298/PAC1601017M . .

TY  - JOUR
AU  - Matović, Branko
AU  - Luković, Jelena M.
AU  - Nikolić, Marko
AU  - Babić, Biljana M.
AU  - Stanković, Nadežda
AU  - Jokić, Bojan M.
AU  - Jelenković, Branislav
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1260
AB  - Nanocrystalline hexagonal boron nitride powders (h-BN) were synthesized from urea and boric acid followed by pirolysis and subsequent heat treatment in nitrogen atmosphere. Materials have been analyzed by means of X-ray diffraction, Photoluminescence and Field emission electron microscopy methods. Obtained results show that starting h-BN powder, synthesized at 750 degrees C, is composed of similar to 11 layer crystallites with average crystallite thickness and crystallite lateral size of 3.94 and 10.4 nm, respectively. A broad emission and intense luminescence intensity were observed due to the large atomic disorder. Higher annealing temperature increases crystallite size and turbostratic h-BN transforms to well crystallized h-BN at 1500 degrees C. (C) 2016 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Synthesis and characterization of nanocrystaline hexagonal boron nitride powders: XRD and luminescence properties
VL  - 42
IS  - 15
SP  - 16655
EP  - 16658
DO  - 10.1016/j.ceramint.2016.07.096
ER  - 

@article{
author = "Matović, Branko and Luković, Jelena M. and Nikolić, Marko and Babić, Biljana M. and Stanković, Nadežda and Jokić, Bojan M. and Jelenković, Branislav",
year = "2016",
abstract = "Nanocrystalline hexagonal boron nitride powders (h-BN) were synthesized from urea and boric acid followed by pirolysis and subsequent heat treatment in nitrogen atmosphere. Materials have been analyzed by means of X-ray diffraction, Photoluminescence and Field emission electron microscopy methods. Obtained results show that starting h-BN powder, synthesized at 750 degrees C, is composed of similar to 11 layer crystallites with average crystallite thickness and crystallite lateral size of 3.94 and 10.4 nm, respectively. A broad emission and intense luminescence intensity were observed due to the large atomic disorder. Higher annealing temperature increases crystallite size and turbostratic h-BN transforms to well crystallized h-BN at 1500 degrees C. (C) 2016 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Synthesis and characterization of nanocrystaline hexagonal boron nitride powders: XRD and luminescence properties",
volume = "42",
number = "15",
pages = "16655-16658",
doi = "10.1016/j.ceramint.2016.07.096"
}

Matović, B., Luković, J. M., Nikolić, M., Babić, B. M., Stanković, N., Jokić, B. M.,& Jelenković, B.. (2016). Synthesis and characterization of nanocrystaline hexagonal boron nitride powders: XRD and luminescence properties. in Ceramics International, 42(15), 16655-16658.
https://doi.org/10.1016/j.ceramint.2016.07.096

Matović B, Luković JM, Nikolić M, Babić BM, Stanković N, Jokić BM, Jelenković B. Synthesis and characterization of nanocrystaline hexagonal boron nitride powders: XRD and luminescence properties. in Ceramics International. 2016;42(15):16655-16658.
doi:10.1016/j.ceramint.2016.07.096 .

Matović, Branko, Luković, Jelena M., Nikolić, Marko, Babić, Biljana M., Stanković, Nadežda, Jokić, Bojan M., Jelenković, Branislav, "Synthesis and characterization of nanocrystaline hexagonal boron nitride powders: XRD and luminescence properties" in Ceramics International, 42, no. 15 (2016):16655-16658,
https://doi.org/10.1016/j.ceramint.2016.07.096 . .

TY  - JOUR
AU  - Potočnik, Jelena
AU  - Nenadović, Miloš
AU  - Jokić, Bojan M.
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1129
AB  - Zig-zag structure of the nickel thin film has been obtained using Glancing Angle Deposition (GLAD) technique. Glass substrate was positioned 75 degrees with respect to the substrate normal. The obtained nickel thin film was characterized by X-ray Photoelectron Spectroscopy, Scanning Electron Microscopy and Atomic Force Microscopy. Surface energy of the deposited thin film was determined by measuring the contact angle using the static sessile drop method.
T2  - Science of Sintering
T1  - Properties of Zig-Zag Nickel Nanostructures Obtained by GLAD Technique
VL  - 48
IS  - 1
SP  - 51
EP  - 56
DO  - 10.2298/SOS1601051P
ER  - 

@article{
author = "Potočnik, Jelena and Nenadović, Miloš and Jokić, Bojan M. and Popović, Maja and Rakočević, Zlatko Lj.",
year = "2016",
abstract = "Zig-zag structure of the nickel thin film has been obtained using Glancing Angle Deposition (GLAD) technique. Glass substrate was positioned 75 degrees with respect to the substrate normal. The obtained nickel thin film was characterized by X-ray Photoelectron Spectroscopy, Scanning Electron Microscopy and Atomic Force Microscopy. Surface energy of the deposited thin film was determined by measuring the contact angle using the static sessile drop method.",
journal = "Science of Sintering",
title = "Properties of Zig-Zag Nickel Nanostructures Obtained by GLAD Technique",
volume = "48",
number = "1",
pages = "51-56",
doi = "10.2298/SOS1601051P"
}

Potočnik, J., Nenadović, M., Jokić, B. M., Popović, M.,& Rakočević, Z. Lj.. (2016). Properties of Zig-Zag Nickel Nanostructures Obtained by GLAD Technique. in Science of Sintering, 48(1), 51-56.
https://doi.org/10.2298/SOS1601051P

Potočnik J, Nenadović M, Jokić BM, Popović M, Rakočević ZL. Properties of Zig-Zag Nickel Nanostructures Obtained by GLAD Technique. in Science of Sintering. 2016;48(1):51-56.
doi:10.2298/SOS1601051P .

Potočnik, Jelena, Nenadović, Miloš, Jokić, Bojan M., Popović, Maja, Rakočević, Zlatko Lj., "Properties of Zig-Zag Nickel Nanostructures Obtained by GLAD Technique" in Science of Sintering, 48, no. 1 (2016):51-56,
https://doi.org/10.2298/SOS1601051P . .

TY  - JOUR
AU  - Potočnik, Jelena
AU  - Nenadović, Miloš
AU  - Bundaleski, Nenad
AU  - Jokić, Bojan M.
AU  - Mitrić, Miodrag
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1259
AB  - In this work, nickel (Ni) thin films were deposited by electron beam evaporation of Ni using Glancing Angle Deposition technique onto the glass substrate with the thickness varied from 25 nm to 150 nm. Characterization of obtained Ni films was performed by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and by Magneto-Optical Kerr effect measurements (MOKE). The effect of thickness on structural, chemical and magnetic properties of nickel films has been studied. Observed changes in microstructure were correlated with the variation in magnetic parameters obtained by MOKE measurements. It was found that for thinner Ni films, the enhancement of coercivity is due to the surface roughness of Ni films, while for thicker films the observed asymmetry of coercivity is due to the mechanism of column size growth. (C) 2016 Elsevier Ltd. All rights reserved.
T2  - Materials Research Bulletin
T1  - The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique
VL  - 84
SP  - 455
EP  - 461
DO  - 10.1016/j.materresbull.2016.08.044
ER  - 

@article{
author = "Potočnik, Jelena and Nenadović, Miloš and Bundaleski, Nenad and Jokić, Bojan M. and Mitrić, Miodrag and Popović, Maja and Rakočević, Zlatko Lj.",
year = "2016",
abstract = "In this work, nickel (Ni) thin films were deposited by electron beam evaporation of Ni using Glancing Angle Deposition technique onto the glass substrate with the thickness varied from 25 nm to 150 nm. Characterization of obtained Ni films was performed by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and by Magneto-Optical Kerr effect measurements (MOKE). The effect of thickness on structural, chemical and magnetic properties of nickel films has been studied. Observed changes in microstructure were correlated with the variation in magnetic parameters obtained by MOKE measurements. It was found that for thinner Ni films, the enhancement of coercivity is due to the surface roughness of Ni films, while for thicker films the observed asymmetry of coercivity is due to the mechanism of column size growth. (C) 2016 Elsevier Ltd. All rights reserved.",
journal = "Materials Research Bulletin",
title = "The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique",
volume = "84",
pages = "455-461",
doi = "10.1016/j.materresbull.2016.08.044"
}

Potočnik, J., Nenadović, M., Bundaleski, N., Jokić, B. M., Mitrić, M., Popović, M.,& Rakočević, Z. Lj.. (2016). The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique. in Materials Research Bulletin, 84, 455-461.
https://doi.org/10.1016/j.materresbull.2016.08.044

Potočnik J, Nenadović M, Bundaleski N, Jokić BM, Mitrić M, Popović M, Rakočević ZL. The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique. in Materials Research Bulletin. 2016;84:455-461.
doi:10.1016/j.materresbull.2016.08.044 .

Potočnik, Jelena, Nenadović, Miloš, Bundaleski, Nenad, Jokić, Bojan M., Mitrić, Miodrag, Popović, Maja, Rakočević, Zlatko Lj., "The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique" in Materials Research Bulletin, 84 (2016):455-461,
https://doi.org/10.1016/j.materresbull.2016.08.044 . .

TY  - JOUR
AU  - Milović, Miloš
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Dominko, Robert
AU  - Stojković-Simatović, Ivana
AU  - Jokić, Bojan M.
AU  - Uskoković, Dragan
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/909
AB  - The key parameters related to cathode materials for commercial use are a high specific capacity, good cycling stability, capacity retention at high current rates, as well as the simplicity of the synthesis process. This study presents a facile synthesis of a composite cathode material, Li2FeSiO4 with carbon, under extreme conditions: rapid heating, short dwell at 750 A degrees C and subsequent quenching. The water-soluble polymer methylcellulose was used both as an excellent dispersing agent and a carbon source that pyrolytically degrades to carbon, thereby enabling the homogeneous deployment of the precursor compounds and the control of the Li2FeSiO4 particle growth from the earliest stage of processing. X-ray powder diffraction reveals the formation of Li2FeSiO4 nanocrystallites with a monoclinic structure in the P2(1)/n space group (#14). The composites electrochemical performance as a cathode material in Li-ion batteries was examined. The influence of the amount of methylcellulose on the microstructural, morphological, conductive, and electrochemical properties of the obtained powders has been discussed. It has been shown that the overall electrochemical performance is improved with an increase of carbon content, through both the decrease of the mean particle diameter and the increase of electrical conductivity.
PB  - Springer
T2  - Cellulose
T1  - The use of methylcellulose for the synthesis of Li2FeSiO4/C composites
VL  - 23
IS  - 1
SP  - 239
EP  - 246
DO  - 10.1007/s10570-015-0806-9
ER  - 

@article{
author = "Milović, Miloš and Jugović, Dragana and Mitrić, Miodrag and Dominko, Robert and Stojković-Simatović, Ivana and Jokić, Bojan M. and Uskoković, Dragan",
year = "2016",
abstract = "The key parameters related to cathode materials for commercial use are a high specific capacity, good cycling stability, capacity retention at high current rates, as well as the simplicity of the synthesis process. This study presents a facile synthesis of a composite cathode material, Li2FeSiO4 with carbon, under extreme conditions: rapid heating, short dwell at 750 A degrees C and subsequent quenching. The water-soluble polymer methylcellulose was used both as an excellent dispersing agent and a carbon source that pyrolytically degrades to carbon, thereby enabling the homogeneous deployment of the precursor compounds and the control of the Li2FeSiO4 particle growth from the earliest stage of processing. X-ray powder diffraction reveals the formation of Li2FeSiO4 nanocrystallites with a monoclinic structure in the P2(1)/n space group (#14). The composites electrochemical performance as a cathode material in Li-ion batteries was examined. The influence of the amount of methylcellulose on the microstructural, morphological, conductive, and electrochemical properties of the obtained powders has been discussed. It has been shown that the overall electrochemical performance is improved with an increase of carbon content, through both the decrease of the mean particle diameter and the increase of electrical conductivity.",
publisher = "Springer",
journal = "Cellulose",
title = "The use of methylcellulose for the synthesis of Li2FeSiO4/C composites",
volume = "23",
number = "1",
pages = "239-246",
doi = "10.1007/s10570-015-0806-9"
}

Milović, M., Jugović, D., Mitrić, M., Dominko, R., Stojković-Simatović, I., Jokić, B. M.,& Uskoković, D.. (2016). The use of methylcellulose for the synthesis of Li2FeSiO4/C composites. in Cellulose
Springer., 23(1), 239-246.
https://doi.org/10.1007/s10570-015-0806-9

Milović M, Jugović D, Mitrić M, Dominko R, Stojković-Simatović I, Jokić BM, Uskoković D. The use of methylcellulose for the synthesis of Li2FeSiO4/C composites. in Cellulose. 2016;23(1):239-246.
doi:10.1007/s10570-015-0806-9 .

Milović, Miloš, Jugović, Dragana, Mitrić, Miodrag, Dominko, Robert, Stojković-Simatović, Ivana, Jokić, Bojan M., Uskoković, Dragan, "The use of methylcellulose for the synthesis of Li2FeSiO4/C composites" in Cellulose, 23, no. 1 (2016):239-246,
https://doi.org/10.1007/s10570-015-0806-9 . .

TY  - JOUR
AU  - Lazarević-Pašti, Tamara
AU  - Pašti, Igor A.
AU  - Jokić, Bojan M.
AU  - Babić, Biljana M.
AU  - Vasić, Vesna M.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1178
AB  - Extensive use of organophosphate pesticides (OPs) invokes development of efficient procedures for their removal from the environment. By introducing low levels ( LT 1 at%) of B, N or P into the structure of mesoporous carbons, we have produced a series of materials with different surface chemical composition, textural properties and level of structural disorder. These adsorbents were applied for removal of dimethoate and its oxo-analogue omethoate from aqueous solutions under batch adsorption conditions and by filtration using modified nylon membrane filters. Adsorption capacities up to 164 mg g(-1) were measured, with OPs uptake typically above 80% for dimethoate concentration as high as 5 x 10(-3) mol dm(-3). After the adsorption, neurotoxic effects of OP-containing water samples were significantly reduced or completely removed. The level of structural disorder was identified as a key parameter for efficient removal of dimethoate and omethoate while in the filtration experiments surface area of adsorbents also played an important role. While the presented research appeals to new fundamental studies of OP-carbon surface interactions, it also indicates a possible strategy in designing new efficient adsorbents for OPs removal from water.
T2  - RSC Advances
T1  - Heteroatom-doped mesoporous carbons as efficient adsorbents for removal of dimethoate and omethoate from water
VL  - 6
IS  - 67
SP  - 62128
EP  - 62139
DO  - 10.1039/c6ra06736k
ER  - 

@article{
author = "Lazarević-Pašti, Tamara and Pašti, Igor A. and Jokić, Bojan M. and Babić, Biljana M. and Vasić, Vesna M.",
year = "2016",
abstract = "Extensive use of organophosphate pesticides (OPs) invokes development of efficient procedures for their removal from the environment. By introducing low levels ( LT 1 at%) of B, N or P into the structure of mesoporous carbons, we have produced a series of materials with different surface chemical composition, textural properties and level of structural disorder. These adsorbents were applied for removal of dimethoate and its oxo-analogue omethoate from aqueous solutions under batch adsorption conditions and by filtration using modified nylon membrane filters. Adsorption capacities up to 164 mg g(-1) were measured, with OPs uptake typically above 80% for dimethoate concentration as high as 5 x 10(-3) mol dm(-3). After the adsorption, neurotoxic effects of OP-containing water samples were significantly reduced or completely removed. The level of structural disorder was identified as a key parameter for efficient removal of dimethoate and omethoate while in the filtration experiments surface area of adsorbents also played an important role. While the presented research appeals to new fundamental studies of OP-carbon surface interactions, it also indicates a possible strategy in designing new efficient adsorbents for OPs removal from water.",
journal = "RSC Advances",
title = "Heteroatom-doped mesoporous carbons as efficient adsorbents for removal of dimethoate and omethoate from water",
volume = "6",
number = "67",
pages = "62128-62139",
doi = "10.1039/c6ra06736k"
}

Lazarević-Pašti, T., Pašti, I. A., Jokić, B. M., Babić, B. M.,& Vasić, V. M.. (2016). Heteroatom-doped mesoporous carbons as efficient adsorbents for removal of dimethoate and omethoate from water. in RSC Advances, 6(67), 62128-62139.
https://doi.org/10.1039/c6ra06736k

Lazarević-Pašti T, Pašti IA, Jokić BM, Babić BM, Vasić VM. Heteroatom-doped mesoporous carbons as efficient adsorbents for removal of dimethoate and omethoate from water. in RSC Advances. 2016;6(67):62128-62139.
doi:10.1039/c6ra06736k .

Lazarević-Pašti, Tamara, Pašti, Igor A., Jokić, Bojan M., Babić, Biljana M., Vasić, Vesna M., "Heteroatom-doped mesoporous carbons as efficient adsorbents for removal of dimethoate and omethoate from water" in RSC Advances, 6, no. 67 (2016):62128-62139,
https://doi.org/10.1039/c6ra06736k . .

TY  - JOUR
AU  - Gulicovski, Jelena J.
AU  - Bajat, Jelena B.
AU  - Jokić, Bojan M.
AU  - Panić, Vladimir
AU  - Mišković-Stanković, Vesna B.
AU  - Milonjić, Slobodan K.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/894
AB  - Ceria coating is formed on Al from the ceria sol prepared exclusively by forced hydrolysis of Ce(NO3)(4), in order to test their ability to protect Al from corrosion. The characterization of sol-gel-processed ceria coating and coating/Al assembly brings new issues on Al corrosion and protection caused by unique properties of the sol-gel coating. The corrosion behaviour of bare Al and Al/CeO2 is investigated by the electrochemical impedance spectroscopy (EIS) during the exposure to NaCl aqueous solution. The morphology and composition of the samples are examined by scanning electron microscopy and energy dispersive spectroscopy. EIS data showed greater corrosion resistance of CeO2-coated aluminium in comparison to bare Al at long exposure times. CeO2 coating does not hinder completely the corrosion processes on Al. The Al beneath CeO2 coating is subjected to intrinsic formation of a uniform protective coating/Al interphase, cross-linked by AlO(OH) fibre-like structures. They appear created by corrosive medium from the coating reversely gelled by NaCl solution. As the fibre network is created during exposure, Al becomes better protected than by spontaneous formation of porous passive layer of Al(OH)(3) on bare aluminium. Sol-gel ceria coatings thus improve corrosion resistance of aluminium during prolonged exposure to corrosive medium.
PB  - Springer
T2  - Journal of Solid State Electrochemistry
T1  - Protective ability and impedance response of sol-gel reversely transformed ceria conversion coating on aluminium
VL  - 20
IS  - 1
SP  - 293
EP  - 303
DO  - 10.1007/s10008-015-3040-3
ER  - 

@article{
author = "Gulicovski, Jelena J. and Bajat, Jelena B. and Jokić, Bojan M. and Panić, Vladimir and Mišković-Stanković, Vesna B. and Milonjić, Slobodan K.",
year = "2016",
abstract = "Ceria coating is formed on Al from the ceria sol prepared exclusively by forced hydrolysis of Ce(NO3)(4), in order to test their ability to protect Al from corrosion. The characterization of sol-gel-processed ceria coating and coating/Al assembly brings new issues on Al corrosion and protection caused by unique properties of the sol-gel coating. The corrosion behaviour of bare Al and Al/CeO2 is investigated by the electrochemical impedance spectroscopy (EIS) during the exposure to NaCl aqueous solution. The morphology and composition of the samples are examined by scanning electron microscopy and energy dispersive spectroscopy. EIS data showed greater corrosion resistance of CeO2-coated aluminium in comparison to bare Al at long exposure times. CeO2 coating does not hinder completely the corrosion processes on Al. The Al beneath CeO2 coating is subjected to intrinsic formation of a uniform protective coating/Al interphase, cross-linked by AlO(OH) fibre-like structures. They appear created by corrosive medium from the coating reversely gelled by NaCl solution. As the fibre network is created during exposure, Al becomes better protected than by spontaneous formation of porous passive layer of Al(OH)(3) on bare aluminium. Sol-gel ceria coatings thus improve corrosion resistance of aluminium during prolonged exposure to corrosive medium.",
publisher = "Springer",
journal = "Journal of Solid State Electrochemistry",
title = "Protective ability and impedance response of sol-gel reversely transformed ceria conversion coating on aluminium",
volume = "20",
number = "1",
pages = "293-303",
doi = "10.1007/s10008-015-3040-3"
}

Gulicovski, J. J., Bajat, J. B., Jokić, B. M., Panić, V., Mišković-Stanković, V. B.,& Milonjić, S. K.. (2016). Protective ability and impedance response of sol-gel reversely transformed ceria conversion coating on aluminium. in Journal of Solid State Electrochemistry
Springer., 20(1), 293-303.
https://doi.org/10.1007/s10008-015-3040-3

Gulicovski JJ, Bajat JB, Jokić BM, Panić V, Mišković-Stanković VB, Milonjić SK. Protective ability and impedance response of sol-gel reversely transformed ceria conversion coating on aluminium. in Journal of Solid State Electrochemistry. 2016;20(1):293-303.
doi:10.1007/s10008-015-3040-3 .

Gulicovski, Jelena J., Bajat, Jelena B., Jokić, Bojan M., Panić, Vladimir, Mišković-Stanković, Vesna B., Milonjić, Slobodan K., "Protective ability and impedance response of sol-gel reversely transformed ceria conversion coating on aluminium" in Journal of Solid State Electrochemistry, 20, no. 1 (2016):293-303,
https://doi.org/10.1007/s10008-015-3040-3 . .

TY  - JOUR
AU  - Stojmenović, Marija
AU  - Momčilović, Milan Z.
AU  - Gavrilov, Nemanja M.
AU  - Pašti, Igor A.
AU  - Mentus, Slavko V.
AU  - Jokić, Bojan M.
AU  - Babić, Biljana M.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/371
AB  - Ordered mesoporous carbon, volume-doped up to 3w.% with Pt, Ru and Pt-Ru nanoparticles was synthesized by evaporation-induced self-assembly method, under acidic conditions. The content of incorporated metal was determined by EDX analysis. The X-ray diffractometry confirmed the existence of highly dispersed metallic phases in doped samples. Specific surface area was determined by N-2-physisorption measurements to range between 452 and 545m(2) g(-1). Raman spectroscopy of investigated materials indicated highly disordered carbon structure with crystallite sizes around 1.4 nm. In a form of thin-layer electrode on glassy carbon support, in 0.1M KOH solution, the prepared materials displayed high activity toward oxygen reduction reaction (ORR) in alkaline media, with onset potentials more positive than -0.10 V vs. SCE. The kinetics of O-2 reduction was found to be affected by both the specific surface area and the concentration of metal dopants. The ethanol tolerance of (Pt, Ru)-doped OMCs was found to be higher than that of common Pt/C ORR catalysts. Presented study provides a new route for the synthesis of active and selective ORR catalysts in alkaline media, being competitive with, or superior to, the existing ones in terms of performance and price. (C) 2014 Elsevier Ltd. All rights reserved.
T2  - Electrochimica Acta
T1  - Incorporation of Pt, Ru and Pt-Ru nanoparticles into ordered mesoporous carbons for efficient oxygen reduction reaction in alkaline media
VL  - 153
SP  - 130
EP  - 139
DO  - 10.1016/j.electacta.2014.11.080
ER  - 

@article{
author = "Stojmenović, Marija and Momčilović, Milan Z. and Gavrilov, Nemanja M. and Pašti, Igor A. and Mentus, Slavko V. and Jokić, Bojan M. and Babić, Biljana M.",
year = "2015",
abstract = "Ordered mesoporous carbon, volume-doped up to 3w.% with Pt, Ru and Pt-Ru nanoparticles was synthesized by evaporation-induced self-assembly method, under acidic conditions. The content of incorporated metal was determined by EDX analysis. The X-ray diffractometry confirmed the existence of highly dispersed metallic phases in doped samples. Specific surface area was determined by N-2-physisorption measurements to range between 452 and 545m(2) g(-1). Raman spectroscopy of investigated materials indicated highly disordered carbon structure with crystallite sizes around 1.4 nm. In a form of thin-layer electrode on glassy carbon support, in 0.1M KOH solution, the prepared materials displayed high activity toward oxygen reduction reaction (ORR) in alkaline media, with onset potentials more positive than -0.10 V vs. SCE. The kinetics of O-2 reduction was found to be affected by both the specific surface area and the concentration of metal dopants. The ethanol tolerance of (Pt, Ru)-doped OMCs was found to be higher than that of common Pt/C ORR catalysts. Presented study provides a new route for the synthesis of active and selective ORR catalysts in alkaline media, being competitive with, or superior to, the existing ones in terms of performance and price. (C) 2014 Elsevier Ltd. All rights reserved.",
journal = "Electrochimica Acta",
title = "Incorporation of Pt, Ru and Pt-Ru nanoparticles into ordered mesoporous carbons for efficient oxygen reduction reaction in alkaline media",
volume = "153",
pages = "130-139",
doi = "10.1016/j.electacta.2014.11.080"
}

Stojmenović, M., Momčilović, M. Z., Gavrilov, N. M., Pašti, I. A., Mentus, S. V., Jokić, B. M.,& Babić, B. M.. (2015). Incorporation of Pt, Ru and Pt-Ru nanoparticles into ordered mesoporous carbons for efficient oxygen reduction reaction in alkaline media. in Electrochimica Acta, 153, 130-139.
https://doi.org/10.1016/j.electacta.2014.11.080

Stojmenović M, Momčilović MZ, Gavrilov NM, Pašti IA, Mentus SV, Jokić BM, Babić BM. Incorporation of Pt, Ru and Pt-Ru nanoparticles into ordered mesoporous carbons for efficient oxygen reduction reaction in alkaline media. in Electrochimica Acta. 2015;153:130-139.
doi:10.1016/j.electacta.2014.11.080 .

Stojmenović, Marija, Momčilović, Milan Z., Gavrilov, Nemanja M., Pašti, Igor A., Mentus, Slavko V., Jokić, Bojan M., Babić, Biljana M., "Incorporation of Pt, Ru and Pt-Ru nanoparticles into ordered mesoporous carbons for efficient oxygen reduction reaction in alkaline media" in Electrochimica Acta, 153 (2015):130-139,
https://doi.org/10.1016/j.electacta.2014.11.080 . .

TY  - CONF
AU  - Jugović, Dragana
AU  - Milović, Miloš
AU  - Mitrić, Miodrag
AU  - Cvjetićanin, Nikola
AU  - Avdeev, Max
AU  - Jokić, Bojan M.
AU  - Uskoković, Dragan
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7543
AB  - The room temperature Na-ion secondary battery has been under focus lately due to its feasibility to compete against the already well-established Li-ion secondary battery. Transition metal oxides of general formula NaxMO2 have been investigated as potential cathode materials for sodium batteries. Layered NaxCoO2 is synthesized via solid-state method at 900 ºC in air atmosphere. Fluorine doping of the as-prepared powder is established by the use of ammonium hydrogen difluoride (NH4HF2) as a fluorinating agent. The fluorination takes place only at low temperature (200 ºC), while the treatment at higher temperatures (≥ 400 ºC) facilitates the formation of NaF. It is shown that various and controllable amounts of fluorine can be successfully incorporated into the structure. Finally, the effects of fluorine doping on both structural and electrochemical properties are examined.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Seventeenth Annual Conference YUCOMAT 2015 : Programme and The Book of Abstracts
T1  - Fluorine Doping of Layered NaxCoO2 Structure
SP  - 12
EP  - 12
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7543
ER  - 

@conference{
author = "Jugović, Dragana and Milović, Miloš and Mitrić, Miodrag and Cvjetićanin, Nikola and Avdeev, Max and Jokić, Bojan M. and Uskoković, Dragan",
year = "2015",
abstract = "The room temperature Na-ion secondary battery has been under focus lately due to its feasibility to compete against the already well-established Li-ion secondary battery. Transition metal oxides of general formula NaxMO2 have been investigated as potential cathode materials for sodium batteries. Layered NaxCoO2 is synthesized via solid-state method at 900 ºC in air atmosphere. Fluorine doping of the as-prepared powder is established by the use of ammonium hydrogen difluoride (NH4HF2) as a fluorinating agent. The fluorination takes place only at low temperature (200 ºC), while the treatment at higher temperatures (≥ 400 ºC) facilitates the formation of NaF. It is shown that various and controllable amounts of fluorine can be successfully incorporated into the structure. Finally, the effects of fluorine doping on both structural and electrochemical properties are examined.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Seventeenth Annual Conference YUCOMAT 2015 : Programme and The Book of Abstracts",
title = "Fluorine Doping of Layered NaxCoO2 Structure",
pages = "12-12",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7543"
}

Jugović, D., Milović, M., Mitrić, M., Cvjetićanin, N., Avdeev, M., Jokić, B. M.,& Uskoković, D.. (2015). Fluorine Doping of Layered NaxCoO2 Structure. in Seventeenth Annual Conference YUCOMAT 2015 : Programme and The Book of Abstracts
Belgrade : Materials Research Society of Serbia., 12-12.
https://hdl.handle.net/21.15107/rcub_vinar_7543

Jugović D, Milović M, Mitrić M, Cvjetićanin N, Avdeev M, Jokić BM, Uskoković D. Fluorine Doping of Layered NaxCoO2 Structure. in Seventeenth Annual Conference YUCOMAT 2015 : Programme and The Book of Abstracts. 2015;:12-12.
https://hdl.handle.net/21.15107/rcub_vinar_7543 .

Jugović, Dragana, Milović, Miloš, Mitrić, Miodrag, Cvjetićanin, Nikola, Avdeev, Max, Jokić, Bojan M., Uskoković, Dragan, "Fluorine Doping of Layered NaxCoO2 Structure" in Seventeenth Annual Conference YUCOMAT 2015 : Programme and The Book of Abstracts (2015):12-12,
https://hdl.handle.net/21.15107/rcub_vinar_7543 .