TY  - JOUR
AU  - Manojlović, Dragica
AU  - Dramićanin, Miroslav
AU  - Ležaja, Maja
AU  - Pongprueksa, Pong
AU  - Van Meerbeek, Bart
AU  - Miletić, Vesna
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/953
AB  - Objective. To study the effect of a low-shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on color, translucency, and color stability of model resin-based composites (RBCs). Methods. Four micro-hybrid RBCs were prepared containing barium-glass fillers in bisphenol A-glycidyl-methacrylate (BisGMA) and triethyleneglycol-dimethacrylate (TEGDMA) or urethane-based low-shrinkage monomer FIT-852 (FIT; Esstech Inc.) and TEGDMA matrix. Camphorquinone (CQ)/amine or Lucirin TPO were used as photoinitiators. Commercial low-shrinkage RBCs (Charisma Diamond, Heraeus Kulzer and NDurance, Septodont) and conventional RBCs (Tetric EvoCeram, Ivoclar Vivadent and Filtek Z250, 3M ESPE) were used as controls. Color and translucency were measured using Thermo Scientific Evolution (Thermo Fisher Scientific) and SpectroShade (TM) Micro (MHT Optic Research) spectrophotometers. Color stability was evaluated after immersion in black tea (pure, with milk or lemon) and distilled water. Data were analyzed using analyses of variance with Tukeys post-test (alpha = 0.05). Results. Photoinitiators had no significant effect on baseline color. Initially whiter FIT-based RBCs showed greater staining in all staining solutions than BisGMA-based RBCs. TPO-containing RBCs showed better color stability than CQ-containing RBCs irrespective of the base monomer. Tea and tea with lemon induced greatest color changes. Adding milk to tea significantly reduced material staining. Significance. Urethane-based low-shrinkage monomer FIT and conventional BisGMA affected color, translucency and color stability of their respective RBCs. Despite being used in posterior teeth, low-shrinkage RBCs are expected to have favorable optical and esthetic properties. Manufacturers are urged to provide information on optical properties of monomers and monomer mixtures in their low-shrinkage RBCs to allow understanding of interaction with fillers and photoinitiators. (C) 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.
PB  - Elsevier
T2  - Dental Materials
T1  - Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites
VL  - 32
IS  - 2
SP  - 183
EP  - 191
DO  - 10.1016/j.dental.2015.11.027
ER  - 

@article{
author = "Manojlović, Dragica and Dramićanin, Miroslav and Ležaja, Maja and Pongprueksa, Pong and Van Meerbeek, Bart and Miletić, Vesna",
year = "2016",
abstract = "Objective. To study the effect of a low-shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on color, translucency, and color stability of model resin-based composites (RBCs). Methods. Four micro-hybrid RBCs were prepared containing barium-glass fillers in bisphenol A-glycidyl-methacrylate (BisGMA) and triethyleneglycol-dimethacrylate (TEGDMA) or urethane-based low-shrinkage monomer FIT-852 (FIT; Esstech Inc.) and TEGDMA matrix. Camphorquinone (CQ)/amine or Lucirin TPO were used as photoinitiators. Commercial low-shrinkage RBCs (Charisma Diamond, Heraeus Kulzer and NDurance, Septodont) and conventional RBCs (Tetric EvoCeram, Ivoclar Vivadent and Filtek Z250, 3M ESPE) were used as controls. Color and translucency were measured using Thermo Scientific Evolution (Thermo Fisher Scientific) and SpectroShade (TM) Micro (MHT Optic Research) spectrophotometers. Color stability was evaluated after immersion in black tea (pure, with milk or lemon) and distilled water. Data were analyzed using analyses of variance with Tukeys post-test (alpha = 0.05). Results. Photoinitiators had no significant effect on baseline color. Initially whiter FIT-based RBCs showed greater staining in all staining solutions than BisGMA-based RBCs. TPO-containing RBCs showed better color stability than CQ-containing RBCs irrespective of the base monomer. Tea and tea with lemon induced greatest color changes. Adding milk to tea significantly reduced material staining. Significance. Urethane-based low-shrinkage monomer FIT and conventional BisGMA affected color, translucency and color stability of their respective RBCs. Despite being used in posterior teeth, low-shrinkage RBCs are expected to have favorable optical and esthetic properties. Manufacturers are urged to provide information on optical properties of monomers and monomer mixtures in their low-shrinkage RBCs to allow understanding of interaction with fillers and photoinitiators. (C) 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.",
publisher = "Elsevier",
journal = "Dental Materials",
title = "Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites",
volume = "32",
number = "2",
pages = "183-191",
doi = "10.1016/j.dental.2015.11.027"
}

Manojlović, D., Dramićanin, M., Ležaja, M., Pongprueksa, P., Van Meerbeek, B.,& Miletić, V.. (2016). Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites. in Dental Materials
Elsevier., 32(2), 183-191.
https://doi.org/10.1016/j.dental.2015.11.027

Manojlović D, Dramićanin M, Ležaja M, Pongprueksa P, Van Meerbeek B, Miletić V. Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites. in Dental Materials. 2016;32(2):183-191.
doi:10.1016/j.dental.2015.11.027 .

Manojlović, Dragica, Dramićanin, Miroslav, Ležaja, Maja, Pongprueksa, Pong, Van Meerbeek, Bart, Miletić, Vesna, "Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites" in Dental Materials, 32, no. 2 (2016):183-191,
https://doi.org/10.1016/j.dental.2015.11.027 . .

TY  - JOUR
AU  - Ležaja, Maja
AU  - Veljović, Đorđe N.
AU  - Jokić, Bojan M.
AU  - Cvijović-Alagić, Ivana
AU  - Zrilic, Milorad M.
AU  - Miletić, Vesna
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5797
AB  - This study investigated the effect of shape, size, and surface modification of hydroxyapatite (HAP) fillers on the degree of conversion (DC) and mechanical properties of a model BisGMA/TEGDMA composite initially and after 4 weeks of storage. Ten percent of conventional glass fillers were replaced by HAP spheres (Sph), silicon-doped spheres (Sph(Si)), whiskers (Wh), silicon-doped whiskers (Wh(Si)), and nanosized HAP particles (Nano). Spheres were specifically structured agglomerates consisting of a central void and radially orientated primary particles, whereas whiskers were compact monocrystals. DC, Vickers hardness (HV), flexural strength (Fs), flexural modulus (Ef), compressive strength (Cs), and compressive modulus (Ec) were tested. There were no significant differences in the DC between all tested groups. HV decreased by 5.4-17% with the addition of HAP, while Fs increased by 13.9-29% except in Nano group (decrease by 13%). After storage, Sph and Sph(Si) groups showed similar HV, Ef, Cs and Ec and higher Fs than the control. The fracture mode of HAP spheres was through the central void whereas whiskers showed longitudinal delamination, transverse, and mixed fractures. HAP spheres with or without silicon- doping have a potential to be part of the filler content of dental composites. (c) 2013 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 101B: 1469-1476, 2013.
T2  - Journal of Biomedical Materials Research. Part B: Applied Biomaterials
T1  - Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage
VL  - 101
IS  - 8
SP  - 1469
EP  - 1476
DO  - 10.1002/jbm.b.32967
ER  - 

@article{
author = "Ležaja, Maja and Veljović, Đorđe N. and Jokić, Bojan M. and Cvijović-Alagić, Ivana and Zrilic, Milorad M. and Miletić, Vesna",
year = "2013",
abstract = "This study investigated the effect of shape, size, and surface modification of hydroxyapatite (HAP) fillers on the degree of conversion (DC) and mechanical properties of a model BisGMA/TEGDMA composite initially and after 4 weeks of storage. Ten percent of conventional glass fillers were replaced by HAP spheres (Sph), silicon-doped spheres (Sph(Si)), whiskers (Wh), silicon-doped whiskers (Wh(Si)), and nanosized HAP particles (Nano). Spheres were specifically structured agglomerates consisting of a central void and radially orientated primary particles, whereas whiskers were compact monocrystals. DC, Vickers hardness (HV), flexural strength (Fs), flexural modulus (Ef), compressive strength (Cs), and compressive modulus (Ec) were tested. There were no significant differences in the DC between all tested groups. HV decreased by 5.4-17% with the addition of HAP, while Fs increased by 13.9-29% except in Nano group (decrease by 13%). After storage, Sph and Sph(Si) groups showed similar HV, Ef, Cs and Ec and higher Fs than the control. The fracture mode of HAP spheres was through the central void whereas whiskers showed longitudinal delamination, transverse, and mixed fractures. HAP spheres with or without silicon- doping have a potential to be part of the filler content of dental composites. (c) 2013 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 101B: 1469-1476, 2013.",
journal = "Journal of Biomedical Materials Research. Part B: Applied Biomaterials",
title = "Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage",
volume = "101",
number = "8",
pages = "1469-1476",
doi = "10.1002/jbm.b.32967"
}

Ležaja, M., Veljović, Đ. N., Jokić, B. M., Cvijović-Alagić, I., Zrilic, M. M.,& Miletić, V.. (2013). Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage. in Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 101(8), 1469-1476.
https://doi.org/10.1002/jbm.b.32967

Ležaja M, Veljović ĐN, Jokić BM, Cvijović-Alagić I, Zrilic MM, Miletić V. Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage. in Journal of Biomedical Materials Research. Part B: Applied Biomaterials. 2013;101(8):1469-1476.
doi:10.1002/jbm.b.32967 .

Ležaja, Maja, Veljović, Đorđe N., Jokić, Bojan M., Cvijović-Alagić, Ivana, Zrilic, Milorad M., Miletić, Vesna, "Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage" in Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 101, no. 8 (2013):1469-1476,
https://doi.org/10.1002/jbm.b.32967 . .