TY  - JOUR
AU  - Vukmirović, Jelena
AU  - Joksović, Sara
AU  - Piper, Danica
AU  - Nesterović, Andrea
AU  - Novaković, Mirjana M.
AU  - Rakić, Srđan
AU  - Milanović, Marija
AU  - Srdić, Vladimir
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10456
AB  - Structure of epitaxial LaMnO3 thin films grown on different single crystal substrates by unconventional polymer assisted deposition (PAD) method was investigated. Epitaxial films were prepared from lanthanum manganite water based solutions deposited by spin coating on single crystal MgO (001), SrTiO3 (001) and SrTiO3 (110) substrates, and the influence of substrate type on the film structure was analysed. Better uniformity of the epitaxial LaMnO3 films on SrTiO3 substrates was obtained, but a non-stoichiometric La1-xMnO3 phase was formed after the heat treatment at 750 °C. In addition, the prepared thin films were multiple annealed at different temperatures up to 900 °C, in order to investigate importance of post-annealing treatment. Epitaxial nature of the prepared films was preserved after annealing at up to 900 °C and the structure rearrangement through formation of cell closer to bulk stochiometric LaMnO3 phase was observed.
T2  - Ceramics International
T1  - Epitaxial growth of LaMnO3 thin films on different single crystal substrates by polymer assisted deposition
VL  - 49
IS  - 2
SP  - 2366
EP  - 2372
DO  - 10.1016/j.ceramint.2022.09.207
ER  - 

@article{
author = "Vukmirović, Jelena and Joksović, Sara and Piper, Danica and Nesterović, Andrea and Novaković, Mirjana M. and Rakić, Srđan and Milanović, Marija and Srdić, Vladimir",
year = "2023",
abstract = "Structure of epitaxial LaMnO3 thin films grown on different single crystal substrates by unconventional polymer assisted deposition (PAD) method was investigated. Epitaxial films were prepared from lanthanum manganite water based solutions deposited by spin coating on single crystal MgO (001), SrTiO3 (001) and SrTiO3 (110) substrates, and the influence of substrate type on the film structure was analysed. Better uniformity of the epitaxial LaMnO3 films on SrTiO3 substrates was obtained, but a non-stoichiometric La1-xMnO3 phase was formed after the heat treatment at 750 °C. In addition, the prepared thin films were multiple annealed at different temperatures up to 900 °C, in order to investigate importance of post-annealing treatment. Epitaxial nature of the prepared films was preserved after annealing at up to 900 °C and the structure rearrangement through formation of cell closer to bulk stochiometric LaMnO3 phase was observed.",
journal = "Ceramics International",
title = "Epitaxial growth of LaMnO3 thin films on different single crystal substrates by polymer assisted deposition",
volume = "49",
number = "2",
pages = "2366-2372",
doi = "10.1016/j.ceramint.2022.09.207"
}

Vukmirović, J., Joksović, S., Piper, D., Nesterović, A., Novaković, M. M., Rakić, S., Milanović, M.,& Srdić, V.. (2023). Epitaxial growth of LaMnO3 thin films on different single crystal substrates by polymer assisted deposition. in Ceramics International, 49(2), 2366-2372.
https://doi.org/10.1016/j.ceramint.2022.09.207

Vukmirović J, Joksović S, Piper D, Nesterović A, Novaković MM, Rakić S, Milanović M, Srdić V. Epitaxial growth of LaMnO3 thin films on different single crystal substrates by polymer assisted deposition. in Ceramics International. 2023;49(2):2366-2372.
doi:10.1016/j.ceramint.2022.09.207 .

Vukmirović, Jelena, Joksović, Sara, Piper, Danica, Nesterović, Andrea, Novaković, Mirjana M., Rakić, Srđan, Milanović, Marija, Srdić, Vladimir, "Epitaxial growth of LaMnO3 thin films on different single crystal substrates by polymer assisted deposition" in Ceramics International, 49, no. 2 (2023):2366-2372,
https://doi.org/10.1016/j.ceramint.2022.09.207 . .

TY  - JOUR
AU  - Piper, Danica
AU  - Vukmirović, Jelena
AU  - Toković, Iva
AU  - Kukovecz, Akos
AU  - Szenti, Imre
AU  - Novaković, Mirjana M.
AU  - Milanović, Marija
AU  - Srdić, Vladimir
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11565
AB  - In this work bilayer structures, composed of ferromagnetic manganite and ferroelectric titanate layers, were obtained by solution deposition technique. The first step in preparation of the bilayer thin films was deposition of manganite (LaMnO3 or La0.7Sr0.3MnO3) layer by water-based polymer assisted deposition (PAD). Polycrystalline structures were obtained when manganite films were deposited by spin coating on commercial Pt/TiO2/SiO2/Si type substrate, whereas epitaxial films were grown on a single crystal SrTiO3 with (001) orientation substrate. The second ferroelectric titanate (BaTiO3 or Ba0.7Sr0.3TiO3) layer was deposited by spin coating using sol-gel method. The obtained bilayer structures have thickness below 100 nm, and epitaxial growth of the Ba0.7Sr0.3TiO3 film on the La0.7Sr0.3MnO3 surface was obtained, due to the similar lattice parameters between these two crystal structures.
T2  - Processing and Application of Ceramics
T1  - Epitaxial bilayer La0.7Sr0.3MnO3/Ba0.7Sr0.3TiO3 thin films obtained by polymer assisted deposition
VL  - 17
IS  - 2
SP  - 197
EP  - 202
DO  - 10.2298/PAC2302197P
ER  - 

@article{
author = "Piper, Danica and Vukmirović, Jelena and Toković, Iva and Kukovecz, Akos and Szenti, Imre and Novaković, Mirjana M. and Milanović, Marija and Srdić, Vladimir",
year = "2023",
abstract = "In this work bilayer structures, composed of ferromagnetic manganite and ferroelectric titanate layers, were obtained by solution deposition technique. The first step in preparation of the bilayer thin films was deposition of manganite (LaMnO3 or La0.7Sr0.3MnO3) layer by water-based polymer assisted deposition (PAD). Polycrystalline structures were obtained when manganite films were deposited by spin coating on commercial Pt/TiO2/SiO2/Si type substrate, whereas epitaxial films were grown on a single crystal SrTiO3 with (001) orientation substrate. The second ferroelectric titanate (BaTiO3 or Ba0.7Sr0.3TiO3) layer was deposited by spin coating using sol-gel method. The obtained bilayer structures have thickness below 100 nm, and epitaxial growth of the Ba0.7Sr0.3TiO3 film on the La0.7Sr0.3MnO3 surface was obtained, due to the similar lattice parameters between these two crystal structures.",
journal = "Processing and Application of Ceramics",
title = "Epitaxial bilayer La0.7Sr0.3MnO3/Ba0.7Sr0.3TiO3 thin films obtained by polymer assisted deposition",
volume = "17",
number = "2",
pages = "197-202",
doi = "10.2298/PAC2302197P"
}

Piper, D., Vukmirović, J., Toković, I., Kukovecz, A., Szenti, I., Novaković, M. M., Milanović, M.,& Srdić, V.. (2023). Epitaxial bilayer La0.7Sr0.3MnO3/Ba0.7Sr0.3TiO3 thin films obtained by polymer assisted deposition. in Processing and Application of Ceramics, 17(2), 197-202.
https://doi.org/10.2298/PAC2302197P

Piper D, Vukmirović J, Toković I, Kukovecz A, Szenti I, Novaković MM, Milanović M, Srdić V. Epitaxial bilayer La0.7Sr0.3MnO3/Ba0.7Sr0.3TiO3 thin films obtained by polymer assisted deposition. in Processing and Application of Ceramics. 2023;17(2):197-202.
doi:10.2298/PAC2302197P .

Piper, Danica, Vukmirović, Jelena, Toković, Iva, Kukovecz, Akos, Szenti, Imre, Novaković, Mirjana M., Milanović, Marija, Srdić, Vladimir, "Epitaxial bilayer La0.7Sr0.3MnO3/Ba0.7Sr0.3TiO3 thin films obtained by polymer assisted deposition" in Processing and Application of Ceramics, 17, no. 2 (2023):197-202,
https://doi.org/10.2298/PAC2302197P . .