Stratakis, E.

Link to this page

Authority KeyName Variants
orcid::0000-0002-1908-8618
  • Stratakis, E. (5)

Author's Bibliography

Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response

Petrović, Suzana; Peruško, Davor; Skoulas, E.; Kovač, Janez; Mitrić, Miodrag; Potočnik, Jelena; Rakočević, Zlatko Lj.; Stratakis, E.

(2019)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Skoulas, E.
AU  - Kovač, Janez
AU  - Mitrić, Miodrag
AU  - Potočnik, Jelena
AU  - Rakočević, Zlatko Lj.
AU  - Stratakis, E.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8816
AB  - The formation of an ordered surface texture with micro and nanometer features on Ti/Zr multilayers is studied for better understanding and improvement of cell integration. Nanocomposite in form 30×(Ti/Zr)/Si thin films was deposited by ion sputtering on Si substrate for biocompatibility investigation. Surface texturing by femtosecond laser processing made it possible to form the laser-induced periodic surface structure (LIPSS) in each laser-written line. At fluence slightly above the ablation threshold, beside the formation of low spatial frequency-LIPSS (LSFL) oriented perpendicular to the direction of the laser polarization, the laser-induced surface oxidation was achieved on the irradiated area. Intermixing between the Ti and Zr layers with the formation of alloy in the sub-surface region was attained during the laser processing. The surface of the Ti/Zr multilayer system with changed composition and topography was used to observe the effect of topography on the survival, adhesion and proliferation of the murine mesenchymal stem cells (MSCs). Confocal and SEM microscopy images showed that cell adhesion and their growth improve on these modified surfaces, with tendency of the cell orientation along of LIPSS in laser-written lines. © 2019 by the authors.
T2  - Coatings
T1  - Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response
VL  - 9
IS  - 12
SP  - 854
DO  - 10.3390/coatings9120854
ER  - 
@article{
author = "Petrović, Suzana and Peruško, Davor and Skoulas, E. and Kovač, Janez and Mitrić, Miodrag and Potočnik, Jelena and Rakočević, Zlatko Lj. and Stratakis, E.",
year = "2019",
abstract = "The formation of an ordered surface texture with micro and nanometer features on Ti/Zr multilayers is studied for better understanding and improvement of cell integration. Nanocomposite in form 30×(Ti/Zr)/Si thin films was deposited by ion sputtering on Si substrate for biocompatibility investigation. Surface texturing by femtosecond laser processing made it possible to form the laser-induced periodic surface structure (LIPSS) in each laser-written line. At fluence slightly above the ablation threshold, beside the formation of low spatial frequency-LIPSS (LSFL) oriented perpendicular to the direction of the laser polarization, the laser-induced surface oxidation was achieved on the irradiated area. Intermixing between the Ti and Zr layers with the formation of alloy in the sub-surface region was attained during the laser processing. The surface of the Ti/Zr multilayer system with changed composition and topography was used to observe the effect of topography on the survival, adhesion and proliferation of the murine mesenchymal stem cells (MSCs). Confocal and SEM microscopy images showed that cell adhesion and their growth improve on these modified surfaces, with tendency of the cell orientation along of LIPSS in laser-written lines. © 2019 by the authors.",
journal = "Coatings",
title = "Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response",
volume = "9",
number = "12",
pages = "854",
doi = "10.3390/coatings9120854"
}
Petrović, S., Peruško, D., Skoulas, E., Kovač, J., Mitrić, M., Potočnik, J., Rakočević, Z. Lj.,& Stratakis, E.. (2019). Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response. in Coatings, 9(12), 854.
https://doi.org/10.3390/coatings9120854
Petrović S, Peruško D, Skoulas E, Kovač J, Mitrić M, Potočnik J, Rakočević ZL, Stratakis E. Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response. in Coatings. 2019;9(12):854.
doi:10.3390/coatings9120854 .
Petrović, Suzana, Peruško, Davor, Skoulas, E., Kovač, Janez, Mitrić, Miodrag, Potočnik, Jelena, Rakočević, Zlatko Lj., Stratakis, E., "Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response" in Coatings, 9, no. 12 (2019):854,
https://doi.org/10.3390/coatings9120854 . .
2
2
2

Partial ablation of Ti/Al nano-layer thin film by single femtosecond laser pulse

Gaković, Biljana M.; Tsibidis, G. D.; Skoulas, E.; Petrović, Srđan M.; Vasić, Borislav Z.; Stratakis, E.

(2017)

TY  - JOUR
AU  - Gaković, Biljana M.
AU  - Tsibidis, G. D.
AU  - Skoulas, E.
AU  - Petrović, Srđan M.
AU  - Vasić, Borislav Z.
AU  - Stratakis, E.
PY  - 2017
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/1880
AB  - The interaction of ultra-short laser pulses with Titanium/Aluminium (Ti/Al) nano-layered thin film was investigated. The sample composed of alternating Ti and Al layers of a few nanometres thick was deposited by ion-sputtering. A single pulse irradiation experiment was conducted in an ambient air environment using focused and linearly polarized femtosecond laser pulses for the investigation of the ablation effects. The laser induced morphological changes and the composition were characterized using several microscopy techniques and energy dispersive X-ray spectroscopy. The following results were obtained: (i) at low values of pulse energy/fluence, ablation of the upper Ti layer only was observed; (ii) at higher laser fluence, a two-step ablation of Ti and Al layers takes place, followed by partial removal of the nano-layered film. The experimental observations were supported by a theoretical model accounting for the thermal response of the multiple layered structure upon irradiation with ultra-short laser pulses. Published by AIP Publishing.
T2  - Journal of Applied Physics
T1  - Partial ablation of Ti/Al nano-layer thin film by single femtosecond laser pulse
VL  - 122
IS  - 22
DO  - 10.1063/1.5016548
ER  - 
@article{
author = "Gaković, Biljana M. and Tsibidis, G. D. and Skoulas, E. and Petrović, Srđan M. and Vasić, Borislav Z. and Stratakis, E.",
year = "2017",
abstract = "The interaction of ultra-short laser pulses with Titanium/Aluminium (Ti/Al) nano-layered thin film was investigated. The sample composed of alternating Ti and Al layers of a few nanometres thick was deposited by ion-sputtering. A single pulse irradiation experiment was conducted in an ambient air environment using focused and linearly polarized femtosecond laser pulses for the investigation of the ablation effects. The laser induced morphological changes and the composition were characterized using several microscopy techniques and energy dispersive X-ray spectroscopy. The following results were obtained: (i) at low values of pulse energy/fluence, ablation of the upper Ti layer only was observed; (ii) at higher laser fluence, a two-step ablation of Ti and Al layers takes place, followed by partial removal of the nano-layered film. The experimental observations were supported by a theoretical model accounting for the thermal response of the multiple layered structure upon irradiation with ultra-short laser pulses. Published by AIP Publishing.",
journal = "Journal of Applied Physics",
title = "Partial ablation of Ti/Al nano-layer thin film by single femtosecond laser pulse",
volume = "122",
number = "22",
doi = "10.1063/1.5016548"
}
Gaković, B. M., Tsibidis, G. D., Skoulas, E., Petrović, S. M., Vasić, B. Z.,& Stratakis, E.. (2017). Partial ablation of Ti/Al nano-layer thin film by single femtosecond laser pulse. in Journal of Applied Physics, 122(22).
https://doi.org/10.1063/1.5016548
Gaković BM, Tsibidis GD, Skoulas E, Petrović SM, Vasić BZ, Stratakis E. Partial ablation of Ti/Al nano-layer thin film by single femtosecond laser pulse. in Journal of Applied Physics. 2017;122(22).
doi:10.1063/1.5016548 .
Gaković, Biljana M., Tsibidis, G. D., Skoulas, E., Petrović, Srđan M., Vasić, Borislav Z., Stratakis, E., "Partial ablation of Ti/Al nano-layer thin film by single femtosecond laser pulse" in Journal of Applied Physics, 122, no. 22 (2017),
https://doi.org/10.1063/1.5016548 . .
2
13
13
12

Low and high repetition frequency femtosecond lasers processing of tungsten-based thin film

Gaković, Biljana M.; Petrović, Suzana; Krmpot, Aleksandar J.; Pantelić, Dejan; Jelenković, Branislav; Stratakis, E.; Fotakis, C.

(2014)

TY  - JOUR
AU  - Gaković, Biljana M.
AU  - Petrović, Suzana
AU  - Krmpot, Aleksandar J.
AU  - Pantelić, Dejan
AU  - Jelenković, Branislav
AU  - Stratakis, E.
AU  - Fotakis, C.
PY  - 2014
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/228
AB  - In this work we reported low and high repetition frequency femtosecond laser- induced modifications of tungsten-based thin film. The tungsten-titanium (WTi) thin film, thickness of 190 nm, was deposited by sputtering on single crystal Si (100) wafer. Irradiations were performed in air by linearly polarized and focused femtosecond laser beams with following parameters: (1) pulse duration 160 fs, wavelength 800 nm, laser repetition frequency (LRF) 75 MHz - high LRF, and (2) duration 40 fs, wavelength 800 nm, LRF of 1 kHz - low LRF. The results of femtosecond lasers processing of the WTi thin film revealed laser induced periodical surface structures (LIPSS) in the case of low LRF regime. LIPSSs were formed with different periodicity and different orientation to the laser polarization at the surface: micro-scale LIPSSs with orientation perpendicular to the laser polarization and nano-scale LIPSSs parallel and perpendicular to the laser polarization. After processing of the WTi/Si system in high LRF regime ablation and nanoparticles formation were registered.
T2  - Laser and Particle Beams
T1  - Low and high repetition frequency femtosecond lasers processing of tungsten-based thin film
VL  - 32
IS  - 4
SP  - 613
EP  - 619
DO  - 10.1017/S0263034614000627
ER  - 
@article{
author = "Gaković, Biljana M. and Petrović, Suzana and Krmpot, Aleksandar J. and Pantelić, Dejan and Jelenković, Branislav and Stratakis, E. and Fotakis, C.",
year = "2014",
abstract = "In this work we reported low and high repetition frequency femtosecond laser- induced modifications of tungsten-based thin film. The tungsten-titanium (WTi) thin film, thickness of 190 nm, was deposited by sputtering on single crystal Si (100) wafer. Irradiations were performed in air by linearly polarized and focused femtosecond laser beams with following parameters: (1) pulse duration 160 fs, wavelength 800 nm, laser repetition frequency (LRF) 75 MHz - high LRF, and (2) duration 40 fs, wavelength 800 nm, LRF of 1 kHz - low LRF. The results of femtosecond lasers processing of the WTi thin film revealed laser induced periodical surface structures (LIPSS) in the case of low LRF regime. LIPSSs were formed with different periodicity and different orientation to the laser polarization at the surface: micro-scale LIPSSs with orientation perpendicular to the laser polarization and nano-scale LIPSSs parallel and perpendicular to the laser polarization. After processing of the WTi/Si system in high LRF regime ablation and nanoparticles formation were registered.",
journal = "Laser and Particle Beams",
title = "Low and high repetition frequency femtosecond lasers processing of tungsten-based thin film",
volume = "32",
number = "4",
pages = "613-619",
doi = "10.1017/S0263034614000627"
}
Gaković, B. M., Petrović, S., Krmpot, A. J., Pantelić, D., Jelenković, B., Stratakis, E.,& Fotakis, C.. (2014). Low and high repetition frequency femtosecond lasers processing of tungsten-based thin film. in Laser and Particle Beams, 32(4), 613-619.
https://doi.org/10.1017/S0263034614000627
Gaković BM, Petrović S, Krmpot AJ, Pantelić D, Jelenković B, Stratakis E, Fotakis C. Low and high repetition frequency femtosecond lasers processing of tungsten-based thin film. in Laser and Particle Beams. 2014;32(4):613-619.
doi:10.1017/S0263034614000627 .
Gaković, Biljana M., Petrović, Suzana, Krmpot, Aleksandar J., Pantelić, Dejan, Jelenković, Branislav, Stratakis, E., Fotakis, C., "Low and high repetition frequency femtosecond lasers processing of tungsten-based thin film" in Laser and Particle Beams, 32, no. 4 (2014):613-619,
https://doi.org/10.1017/S0263034614000627 . .

Synthesis of ultra-thin oxide layer in laser-treated 3x (Al/Fe)/Si multilayer structure

Petrović, Suzana; Gaković, Biljana M.; Kovač, Janez; Panjan, Peter; Stratakis, E.; Trtica, Milan; Fotakis, C.; Jelenković, Branislav

(2014)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Gaković, Biljana M.
AU  - Kovač, Janez
AU  - Panjan, Peter
AU  - Stratakis, E.
AU  - Trtica, Milan
AU  - Fotakis, C.
AU  - Jelenković, Branislav
PY  - 2014
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/103
AB  - The conditions of ultra-thin oxide films synthesized as the Al/Fe multilayer structures after the surface treatment with femtosecond laser radiation were studied. Thin films composed of three (Al/Fe) bilayers were deposited by DC ion sputtering on (100) Si wafers to the total thickness of 410 nm. Laser irradiations were performed by 40-fs pulses of a Ti:Sapphire laser operating at 800 nm, at fluences slightly higher than the ablation threshold. The samples were characterized by Auger electron spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. Progressed intermixing of components was achieved for the irradiation with fluence of 0.43 J cm(-2), when intermetallic phase was formed and all components were almost uniformly distributed through the entire multilayer structure. Exception is the subsurface region, to the thickness of 20 nm, where the distribution of constructive components and their oxide is changing with the distance from the surface, and this distribution depends on the applied laser fluences. An ultra-thin oxide layer was formed at the surface, with the specific combination of the oxide phases, Al2O3 and Fe2O3, depending on the applied fluences. Laser-induced modification was accompanied with the ablation of the material and the creation of parallel periodic structures. These effects of laser-induced morphological features are increased with increasing laser fluences, caused by the pronounced mobility of the materials. The special morphology of the laser-assisted synthesis of mixture of Al2O3 and Fe2O3 in the form of an ultra-thin oxide layer can improve their characteristics for functional applications, as catalysts and sensors.
T2  - Journal of Materials Science
T1  - Synthesis of ultra-thin oxide layer in laser-treated 3x (Al/Fe)/Si multilayer structure
VL  - 49
IS  - 22
SP  - 7900
EP  - 7907
DO  - 10.1007/s10853-014-8502-y
ER  - 
@article{
author = "Petrović, Suzana and Gaković, Biljana M. and Kovač, Janez and Panjan, Peter and Stratakis, E. and Trtica, Milan and Fotakis, C. and Jelenković, Branislav",
year = "2014",
abstract = "The conditions of ultra-thin oxide films synthesized as the Al/Fe multilayer structures after the surface treatment with femtosecond laser radiation were studied. Thin films composed of three (Al/Fe) bilayers were deposited by DC ion sputtering on (100) Si wafers to the total thickness of 410 nm. Laser irradiations were performed by 40-fs pulses of a Ti:Sapphire laser operating at 800 nm, at fluences slightly higher than the ablation threshold. The samples were characterized by Auger electron spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. Progressed intermixing of components was achieved for the irradiation with fluence of 0.43 J cm(-2), when intermetallic phase was formed and all components were almost uniformly distributed through the entire multilayer structure. Exception is the subsurface region, to the thickness of 20 nm, where the distribution of constructive components and their oxide is changing with the distance from the surface, and this distribution depends on the applied laser fluences. An ultra-thin oxide layer was formed at the surface, with the specific combination of the oxide phases, Al2O3 and Fe2O3, depending on the applied fluences. Laser-induced modification was accompanied with the ablation of the material and the creation of parallel periodic structures. These effects of laser-induced morphological features are increased with increasing laser fluences, caused by the pronounced mobility of the materials. The special morphology of the laser-assisted synthesis of mixture of Al2O3 and Fe2O3 in the form of an ultra-thin oxide layer can improve their characteristics for functional applications, as catalysts and sensors.",
journal = "Journal of Materials Science",
title = "Synthesis of ultra-thin oxide layer in laser-treated 3x (Al/Fe)/Si multilayer structure",
volume = "49",
number = "22",
pages = "7900-7907",
doi = "10.1007/s10853-014-8502-y"
}
Petrović, S., Gaković, B. M., Kovač, J., Panjan, P., Stratakis, E., Trtica, M., Fotakis, C.,& Jelenković, B.. (2014). Synthesis of ultra-thin oxide layer in laser-treated 3x (Al/Fe)/Si multilayer structure. in Journal of Materials Science, 49(22), 7900-7907.
https://doi.org/10.1007/s10853-014-8502-y
Petrović S, Gaković BM, Kovač J, Panjan P, Stratakis E, Trtica M, Fotakis C, Jelenković B. Synthesis of ultra-thin oxide layer in laser-treated 3x (Al/Fe)/Si multilayer structure. in Journal of Materials Science. 2014;49(22):7900-7907.
doi:10.1007/s10853-014-8502-y .
Petrović, Suzana, Gaković, Biljana M., Kovač, Janez, Panjan, Peter, Stratakis, E., Trtica, Milan, Fotakis, C., Jelenković, Branislav, "Synthesis of ultra-thin oxide layer in laser-treated 3x (Al/Fe)/Si multilayer structure" in Journal of Materials Science, 49, no. 22 (2014):7900-7907,
https://doi.org/10.1007/s10853-014-8502-y . .
1
2
2

Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films

Petrović, Suzana; Gaković, Biljana M.; Peruško, Davor; Stratakis, E.; Bogdanović-Radović, Ivančica; Čekada, Miha; Fotakis, C.; Jelenković, Branislav

(2013)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Gaković, Biljana M.
AU  - Peruško, Davor
AU  - Stratakis, E.
AU  - Bogdanović-Radović, Ivančica
AU  - Čekada, Miha
AU  - Fotakis, C.
AU  - Jelenković, Branislav
PY  - 2013
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/5819
AB  - Laser-induced periodic surface structures (LIPSSs) and chemical composition changes of Ti-based nanolayered thin films (Al/Ti, Ni/Ti) after femtosecond (fs) laser pulses action were studied. Irradiation is performed using linearly polarized Ti:Sapphire fs laser pulses of 40 fs pulse duration and 800 nm wavelength. The low spatial frequency LIPSS (LSFL), oriented perpendicular to the laser polarization with periods slightly lower than the irradiation wavelength, was typically formed at elevated laser fluences. On the contrary, high spatial frequency LIPSS (HSFL) with uniform period of 155 nm, parallel to the laser light polarization, appeared at low laser fluences, as well as in the wings of the Gaussian laser beam distribution for higher used fluence. LSFL formation was associated with the material ablation process and accompanied by the intense formation of nanoparticles, especially in the Ni/Ti system. The composition changes at the surface of both multilayer systems in the LSFL area indicated the intermixing between layers and the substrate. Concentration and distribution of all constitutive elements in the irradiated area with formed HSFLs were almost unchanged. (C) 2013 AIP Publishing LLC.
T2  - Journal of Applied Physics
T1  - Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films
VL  - 114
IS  - 23
DO  - 10.1063/1.4848016
ER  - 
@article{
author = "Petrović, Suzana and Gaković, Biljana M. and Peruško, Davor and Stratakis, E. and Bogdanović-Radović, Ivančica and Čekada, Miha and Fotakis, C. and Jelenković, Branislav",
year = "2013",
abstract = "Laser-induced periodic surface structures (LIPSSs) and chemical composition changes of Ti-based nanolayered thin films (Al/Ti, Ni/Ti) after femtosecond (fs) laser pulses action were studied. Irradiation is performed using linearly polarized Ti:Sapphire fs laser pulses of 40 fs pulse duration and 800 nm wavelength. The low spatial frequency LIPSS (LSFL), oriented perpendicular to the laser polarization with periods slightly lower than the irradiation wavelength, was typically formed at elevated laser fluences. On the contrary, high spatial frequency LIPSS (HSFL) with uniform period of 155 nm, parallel to the laser light polarization, appeared at low laser fluences, as well as in the wings of the Gaussian laser beam distribution for higher used fluence. LSFL formation was associated with the material ablation process and accompanied by the intense formation of nanoparticles, especially in the Ni/Ti system. The composition changes at the surface of both multilayer systems in the LSFL area indicated the intermixing between layers and the substrate. Concentration and distribution of all constitutive elements in the irradiated area with formed HSFLs were almost unchanged. (C) 2013 AIP Publishing LLC.",
journal = "Journal of Applied Physics",
title = "Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films",
volume = "114",
number = "23",
doi = "10.1063/1.4848016"
}
Petrović, S., Gaković, B. M., Peruško, D., Stratakis, E., Bogdanović-Radović, I., Čekada, M., Fotakis, C.,& Jelenković, B.. (2013). Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films. in Journal of Applied Physics, 114(23).
https://doi.org/10.1063/1.4848016
Petrović S, Gaković BM, Peruško D, Stratakis E, Bogdanović-Radović I, Čekada M, Fotakis C, Jelenković B. Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films. in Journal of Applied Physics. 2013;114(23).
doi:10.1063/1.4848016 .
Petrović, Suzana, Gaković, Biljana M., Peruško, Davor, Stratakis, E., Bogdanović-Radović, Ivančica, Čekada, Miha, Fotakis, C., Jelenković, Branislav, "Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films" in Journal of Applied Physics, 114, no. 23 (2013),
https://doi.org/10.1063/1.4848016 . .
26
24
24