TY  - JOUR
AU  - Marinković, Aleksandar
AU  - Milošević, Milena
AU  - Vuksanović, Marija
AU  - Jančić-Heinemann, Radmila
AU  - Matijašević, Milica
AU  - Radmilović, Vuk
AU  - Živković, Predrag
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13199
AB  - U ovom radu su predstavljene mogućnosti povećanja hidrofobnosti površine papira nanošenjem slojeva hidrofobnog materijala na njegovu površinu. Ispitane su dve različite tehnike nanošenja stearinske kiseline, šelaka i cink-hidroksida na površinu papira. Hidrofobnost je ispitana modifikovanom metodom po Kobu, merenjem ugla kvašenja i vremena zadržavanja kapi. Prisustvo sredstava za hidrofobizaciju potvrđeno je FTIR spektroskopijom. Utvrđeno je da se, primenjenim metodama nanošenja, mnogo bolji rezultati dobijaju sa stearinskom kiselinom nego sa šelakom.
AB  - The paper shows the possibilities of increasing the hydrophobicity of the paper surface by applying layers of hydrophobic material to the surface. Various application techniques and the following substances were tested: stearic acid, shellac and zinc-hydroxide. Hydrophobicity was tested using the modified Cobb method, measuring the contact angle and drop retention time. The presence of hydrophobizing agents was confirmed by FTIR spectroscopy. It was found that the methods of applying the hydrophobizing agent, used in this work, give much better results with stearic acid, compared to shellac. This manuscript presents novel possibilities of increasing paper surface hydrophobicity by applying layers of hydrophobic material to the surface. Various layer application techniques were examined, as well as substances including: stearic acid, shellac and zinc-hydroxide. Hydrophobicity was tested using the modified Cobb method, measuring the contact angle and drop retention time. The presence of hydrophobizing agents was confirmed by FTIR spectroscopy. Based on the results achieved, it can be concluded that the methods of applying the hydrophobizing agent, used in this work, give much better results with stearic acid, compared to shellac.
T2  - Tehnika
T1  - Površinska hidrofobizacija ručno pravljenog papira
T1  - Surface hydrophobization of handmade paper
VL  - 79
IS  - 2
SP  - 135
EP  - 142
DO  - 10.5937/tehnika2402135M
ER  - 

@article{
author = "Marinković, Aleksandar and Milošević, Milena and Vuksanović, Marija and Jančić-Heinemann, Radmila and Matijašević, Milica and Radmilović, Vuk and Živković, Predrag",
year = "2024",
abstract = "U ovom radu su predstavljene mogućnosti povećanja hidrofobnosti površine papira nanošenjem slojeva hidrofobnog materijala na njegovu površinu. Ispitane su dve različite tehnike nanošenja stearinske kiseline, šelaka i cink-hidroksida na površinu papira. Hidrofobnost je ispitana modifikovanom metodom po Kobu, merenjem ugla kvašenja i vremena zadržavanja kapi. Prisustvo sredstava za hidrofobizaciju potvrđeno je FTIR spektroskopijom. Utvrđeno je da se, primenjenim metodama nanošenja, mnogo bolji rezultati dobijaju sa stearinskom kiselinom nego sa šelakom., The paper shows the possibilities of increasing the hydrophobicity of the paper surface by applying layers of hydrophobic material to the surface. Various application techniques and the following substances were tested: stearic acid, shellac and zinc-hydroxide. Hydrophobicity was tested using the modified Cobb method, measuring the contact angle and drop retention time. The presence of hydrophobizing agents was confirmed by FTIR spectroscopy. It was found that the methods of applying the hydrophobizing agent, used in this work, give much better results with stearic acid, compared to shellac. This manuscript presents novel possibilities of increasing paper surface hydrophobicity by applying layers of hydrophobic material to the surface. Various layer application techniques were examined, as well as substances including: stearic acid, shellac and zinc-hydroxide. Hydrophobicity was tested using the modified Cobb method, measuring the contact angle and drop retention time. The presence of hydrophobizing agents was confirmed by FTIR spectroscopy. Based on the results achieved, it can be concluded that the methods of applying the hydrophobizing agent, used in this work, give much better results with stearic acid, compared to shellac.",
journal = "Tehnika",
title = "Površinska hidrofobizacija ručno pravljenog papira, Surface hydrophobization of handmade paper",
volume = "79",
number = "2",
pages = "135-142",
doi = "10.5937/tehnika2402135M"
}

Marinković, A., Milošević, M., Vuksanović, M., Jančić-Heinemann, R., Matijašević, M., Radmilović, V.,& Živković, P.. (2024). Površinska hidrofobizacija ručno pravljenog papira. in Tehnika, 79(2), 135-142.
https://doi.org/10.5937/tehnika2402135M

Marinković A, Milošević M, Vuksanović M, Jančić-Heinemann R, Matijašević M, Radmilović V, Živković P. Površinska hidrofobizacija ručno pravljenog papira. in Tehnika. 2024;79(2):135-142.
doi:10.5937/tehnika2402135M .

Marinković, Aleksandar, Milošević, Milena, Vuksanović, Marija, Jančić-Heinemann, Radmila, Matijašević, Milica, Radmilović, Vuk, Živković, Predrag, "Površinska hidrofobizacija ručno pravljenog papira" in Tehnika, 79, no. 2 (2024):135-142,
https://doi.org/10.5937/tehnika2402135M . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana
AU  - Radovanović, Željko
AU  - Živković, Predrag
AU  - Savić, Andrija B.
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12952
AB  - Polimerne smole na bazi akrilata dobijene iz Bis-GMA (Bisfenol A glicidmetakrilat), koji je pogodan za fotopolimerizaciju, koriste se u stomatologiji za različite namene zbog lakoće nanošenja i mogućnosti da se utiče na njihova svojstva dodavanjem ojačanja različitog oblika i hemijskog sastava. Sintetisano je ojačanje u formi čestica na bazi dvostrukih slojevitih hidroksida magnezijuma i aluminijuma (MgAlLDH-Layered Double Hidroxides) nataloženih na silicijum dioksidu dobijenom iz ljuski pirinča. Kao podloge korišćene su metalna legura na bazi hroma i molibdena za primenu u stomatologiji i staklo u formi podloga za mikroskopske preparate. Adhezivna svojstva kompozita su bitna sa aspekta njihove primene. Adhezivna svojstva materijala su određena na osnovu merenja mikrotvrdoće kompozita i to primenom različitih opterećenja kako bi se procenio parametar adhezije koji pokazuje uticaj prevlake na podlogu. Upoređeno je kako se vezuje čista matrica od fotopolimerizujućeg akrilata sa podlogom od stomatološke legure sa vezivanjem za staklenu podlogu. Potom je upoređeno kako se vezuju kompozitni materijali na obe podloge. Adhezija je određena i na osnovu promene ugla kvašenja između kompozita i rezultati su upoređeni sa rezultatima mikroindentacije. Pokazalo se da dodatak kompozitnih čestica kao ojačanja u matricu od akrilata povećava adhezivna svojstva kompozita u odnosu na čistu matricu i da se ostvaruje bolja adhezija između kompozita i metalne podloge nego između kompozita i staklene podloge.
AB  - Polymer resins based on acrylates obtained from Bis-GMA (Bisphenol A glycide methacrylate), which is suitable for photopolymerization, are used in dentistry for various purposes due to the ease of application and the possibility to influence their properties by adding reinforcements of different shapes, crystal structure and chemical compositions. Reinforcement in the form of particles based on MgAlLDH (layered double hydroxide) deposited on silica obtained from rice husks on two substrates. A metal base and glass were used. The adhesive properties are important in order to see the possibility of using these materials in applications. In order to measure the adhesive properties of the material, the composite microhardness measurement method is used by applying different loads in order to evaluate the adhesion parameter that shows the effect of the coating on the substrate. It was compared to how a pure photopolymerizing acrylate matrix bonds with a chromium-based dental alloy substrate that is used in the production of different parts of dentures by bonding to a glass substrate. Then, it was compared how composite materials are bonded to both substrates. Adhesion was monitored through the change in wetting angle between the composites, and the results were compared with the results of microindentation. It was shown that the addition of composite particles increases the adhesive properties of the composite compared to the pure matrix and that better adhesion is achieved between the composite and the metal substrate than between the composite and the glass substrate.
T2  - Tehnika
T1  - Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu
T1  - Adhesion testing of photopolymerizing acrylates reinforced with MgAlLDH@SiO2 particles on dental chromium alloy and on glass
VL  - 79
IS  - 1
SP  - 9
EP  - 13
DO  - 10.5937/tehnika2401009V
ER  - 

@article{
author = "Vuksanović, Marija M. and Mladenović, Ivana and Radovanović, Željko and Živković, Predrag and Savić, Andrija B. and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2024",
abstract = "Polimerne smole na bazi akrilata dobijene iz Bis-GMA (Bisfenol A glicidmetakrilat), koji je pogodan za fotopolimerizaciju, koriste se u stomatologiji za različite namene zbog lakoće nanošenja i mogućnosti da se utiče na njihova svojstva dodavanjem ojačanja različitog oblika i hemijskog sastava. Sintetisano je ojačanje u formi čestica na bazi dvostrukih slojevitih hidroksida magnezijuma i aluminijuma (MgAlLDH-Layered Double Hidroxides) nataloženih na silicijum dioksidu dobijenom iz ljuski pirinča. Kao podloge korišćene su metalna legura na bazi hroma i molibdena za primenu u stomatologiji i staklo u formi podloga za mikroskopske preparate. Adhezivna svojstva kompozita su bitna sa aspekta njihove primene. Adhezivna svojstva materijala su određena na osnovu merenja mikrotvrdoće kompozita i to primenom različitih opterećenja kako bi se procenio parametar adhezije koji pokazuje uticaj prevlake na podlogu. Upoređeno je kako se vezuje čista matrica od fotopolimerizujućeg akrilata sa podlogom od stomatološke legure sa vezivanjem za staklenu podlogu. Potom je upoređeno kako se vezuju kompozitni materijali na obe podloge. Adhezija je određena i na osnovu promene ugla kvašenja između kompozita i rezultati su upoređeni sa rezultatima mikroindentacije. Pokazalo se da dodatak kompozitnih čestica kao ojačanja u matricu od akrilata povećava adhezivna svojstva kompozita u odnosu na čistu matricu i da se ostvaruje bolja adhezija između kompozita i metalne podloge nego između kompozita i staklene podloge., Polymer resins based on acrylates obtained from Bis-GMA (Bisphenol A glycide methacrylate), which is suitable for photopolymerization, are used in dentistry for various purposes due to the ease of application and the possibility to influence their properties by adding reinforcements of different shapes, crystal structure and chemical compositions. Reinforcement in the form of particles based on MgAlLDH (layered double hydroxide) deposited on silica obtained from rice husks on two substrates. A metal base and glass were used. The adhesive properties are important in order to see the possibility of using these materials in applications. In order to measure the adhesive properties of the material, the composite microhardness measurement method is used by applying different loads in order to evaluate the adhesion parameter that shows the effect of the coating on the substrate. It was compared to how a pure photopolymerizing acrylate matrix bonds with a chromium-based dental alloy substrate that is used in the production of different parts of dentures by bonding to a glass substrate. Then, it was compared how composite materials are bonded to both substrates. Adhesion was monitored through the change in wetting angle between the composites, and the results were compared with the results of microindentation. It was shown that the addition of composite particles increases the adhesive properties of the composite compared to the pure matrix and that better adhesion is achieved between the composite and the metal substrate than between the composite and the glass substrate.",
journal = "Tehnika",
title = "Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu, Adhesion testing of photopolymerizing acrylates reinforced with MgAlLDH@SiO2 particles on dental chromium alloy and on glass",
volume = "79",
number = "1",
pages = "9-13",
doi = "10.5937/tehnika2401009V"
}

Vuksanović, M. M., Mladenović, I., Radovanović, Ž., Živković, P., Savić, A. B., Marinković, A.,& Jančić-Heinemann, R.. (2024). Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu. in Tehnika, 79(1), 9-13.
https://doi.org/10.5937/tehnika2401009V

Vuksanović MM, Mladenović I, Radovanović Ž, Živković P, Savić AB, Marinković A, Jančić-Heinemann R. Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu. in Tehnika. 2024;79(1):9-13.
doi:10.5937/tehnika2401009V .

Vuksanović, Marija M., Mladenović, Ivana, Radovanović, Željko, Živković, Predrag, Savić, Andrija B., Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu" in Tehnika, 79, no. 1 (2024):9-13,
https://doi.org/10.5937/tehnika2401009V . .