TY  - CONF
AU  - Mladenović, Jelena
AU  - Radovanović, Blaga
AU  - Stamenković, Tijana
PY  - 2011
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13172
PB  - Republic of Macedonia : Faculty of Natural Sciences and Mathematics Institute of Chemistry „Ss. Cyril and Methodius-University
C3  - Workshop "From molecules to Functionalised Materials" : Intensive Lecture Course : Book of abstracts
T1  - Determination of phenol content and antioxidant activity of leek (Allium Porrum L.) extract
SP  - 49
EP  - 49
UR  - https://hdl.handle.net/21.15107/rcub_vinar_13172
ER  - 

@conference{
author = "Mladenović, Jelena and Radovanović, Blaga and Stamenković, Tijana",
year = "2011",
publisher = "Republic of Macedonia : Faculty of Natural Sciences and Mathematics Institute of Chemistry „Ss. Cyril and Methodius-University",
journal = "Workshop "From molecules to Functionalised Materials" : Intensive Lecture Course : Book of abstracts",
title = "Determination of phenol content and antioxidant activity of leek (Allium Porrum L.) extract",
pages = "49-49",
url = "https://hdl.handle.net/21.15107/rcub_vinar_13172"
}

Mladenović, J., Radovanović, B.,& Stamenković, T.. (2011). Determination of phenol content and antioxidant activity of leek (Allium Porrum L.) extract. in Workshop "From molecules to Functionalised Materials" : Intensive Lecture Course : Book of abstracts
Republic of Macedonia : Faculty of Natural Sciences and Mathematics Institute of Chemistry „Ss. Cyril and Methodius-University., 49-49.
https://hdl.handle.net/21.15107/rcub_vinar_13172

Mladenović J, Radovanović B, Stamenković T. Determination of phenol content and antioxidant activity of leek (Allium Porrum L.) extract. in Workshop "From molecules to Functionalised Materials" : Intensive Lecture Course : Book of abstracts. 2011;:49-49.
https://hdl.handle.net/21.15107/rcub_vinar_13172 .

Mladenović, Jelena, Radovanović, Blaga, Stamenković, Tijana, "Determination of phenol content and antioxidant activity of leek (Allium Porrum L.) extract" in Workshop "From molecules to Functionalised Materials" : Intensive Lecture Course : Book of abstracts (2011):49-49,
https://hdl.handle.net/21.15107/rcub_vinar_13172 .

TY  - JOUR
AU  - Marković, Gordana
AU  - Radovanović, Blaga
AU  - Marinović-Cincović, Milena
AU  - Budinski-Simendić, Jaroslava K.
PY  - 2009
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/3908
AB  - The aim of this work was to determine the influence of accelerator type on curing behavior and properties of sulphur vulcanized rubber blend based on natural rubber (NR) and chlorosulphonated polyethylene (CSM). In NR/CSM compounds filled with carbon black three types of accelerator were used: N-cyclohexylbenzothiazylsulphenamide (CBS), tetramethylthiuram disulphide (TMTD), and 2-mercaptobenzothiazol (MBT). The curing characteristics were estimated using oscillating disk rheometer. The results revealed that the accelerator type not only affects the cure characteristics, but also has great influence on the mechanical properties of obtained elastomers. It was determined that the tensile strength of rubber blends cured in the presence of TMTD was relatively high.
T2  - Materials and Manufacturing Processes
T1  - The Effect of Accelerators on Curing Characteristics and Properties of Natural Rubber/Chlorosulphonated Polyethylene Rubber Blend
VL  - 24
IS  - 10-11
SP  - 1224
EP  - 1228
DO  - 10.1080/10426910902967087
ER  - 

@article{
author = "Marković, Gordana and Radovanović, Blaga and Marinović-Cincović, Milena and Budinski-Simendić, Jaroslava K.",
year = "2009",
abstract = "The aim of this work was to determine the influence of accelerator type on curing behavior and properties of sulphur vulcanized rubber blend based on natural rubber (NR) and chlorosulphonated polyethylene (CSM). In NR/CSM compounds filled with carbon black three types of accelerator were used: N-cyclohexylbenzothiazylsulphenamide (CBS), tetramethylthiuram disulphide (TMTD), and 2-mercaptobenzothiazol (MBT). The curing characteristics were estimated using oscillating disk rheometer. The results revealed that the accelerator type not only affects the cure characteristics, but also has great influence on the mechanical properties of obtained elastomers. It was determined that the tensile strength of rubber blends cured in the presence of TMTD was relatively high.",
journal = "Materials and Manufacturing Processes",
title = "The Effect of Accelerators on Curing Characteristics and Properties of Natural Rubber/Chlorosulphonated Polyethylene Rubber Blend",
volume = "24",
number = "10-11",
pages = "1224-1228",
doi = "10.1080/10426910902967087"
}

Marković, G., Radovanović, B., Marinović-Cincović, M.,& Budinski-Simendić, J. K.. (2009). The Effect of Accelerators on Curing Characteristics and Properties of Natural Rubber/Chlorosulphonated Polyethylene Rubber Blend. in Materials and Manufacturing Processes, 24(10-11), 1224-1228.
https://doi.org/10.1080/10426910902967087

Marković G, Radovanović B, Marinović-Cincović M, Budinski-Simendić JK. The Effect of Accelerators on Curing Characteristics and Properties of Natural Rubber/Chlorosulphonated Polyethylene Rubber Blend. in Materials and Manufacturing Processes. 2009;24(10-11):1224-1228.
doi:10.1080/10426910902967087 .

Marković, Gordana, Radovanović, Blaga, Marinović-Cincović, Milena, Budinski-Simendić, Jaroslava K., "The Effect of Accelerators on Curing Characteristics and Properties of Natural Rubber/Chlorosulphonated Polyethylene Rubber Blend" in Materials and Manufacturing Processes, 24, no. 10-11 (2009):1224-1228,
https://doi.org/10.1080/10426910902967087 . .

TY  - JOUR
AU  - Marković, Gordana
AU  - Marinović-Cincović, Milena
AU  - Vodnik, Vesna
AU  - Radovanović, Blaga
AU  - Budinski-Simendić, Jaroslava K.
AU  - Veljkovic, Olivera
PY  - 2009
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6840
AB  - The properties of chlorosulphonated polyethylene (CSM) rubber, acrylonitrile rubber (NBR) and their blend (50/50 w/w) were studied. Fourier transform infrared (FTIR) studies supported that CSM/NBR rubber blend is self curable, when cross-linking takes place between acrylonitrile groups of NBR and -SO(2)Cl groups or in situ generated allyl chloride moieties of CSM. The thermal stability of vulcanizates was analyzed in nitrogen by thermogravimetry. It was found that the initial degradation temperature of elastomer based on CSM rubber is lower than of pure NBR rubber. By adding NBR to CSM rubbers, the degradation temperature of crosslinked material increased, indicating higher thermal stability. The activation energy for the degradation are determined using the Arrhenius equation The activation energies for the rubber blends are higher than for elastomers based on pure rubbers. It was found that the mass loss of the blends at any temperature was between those of the pure rubbers. The differential scanning calorimetry (DSC) was used for the glass transition temperature determination. It is estimated thermodynamic immiscibility of NBR/CSM blend based on noticed two different glass transition temperatures, corresponding to CSM and NBR rubbers.
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Thermal stability of acrylonitrile/chlorosulphonated polyethylene rubber blend
VL  - 97
IS  - 3
SP  - 999
EP  - 1006
DO  - 10.1007/s10973-009-0162-9
ER  - 

@article{
author = "Marković, Gordana and Marinović-Cincović, Milena and Vodnik, Vesna and Radovanović, Blaga and Budinski-Simendić, Jaroslava K. and Veljkovic, Olivera",
year = "2009",
abstract = "The properties of chlorosulphonated polyethylene (CSM) rubber, acrylonitrile rubber (NBR) and their blend (50/50 w/w) were studied. Fourier transform infrared (FTIR) studies supported that CSM/NBR rubber blend is self curable, when cross-linking takes place between acrylonitrile groups of NBR and -SO(2)Cl groups or in situ generated allyl chloride moieties of CSM. The thermal stability of vulcanizates was analyzed in nitrogen by thermogravimetry. It was found that the initial degradation temperature of elastomer based on CSM rubber is lower than of pure NBR rubber. By adding NBR to CSM rubbers, the degradation temperature of crosslinked material increased, indicating higher thermal stability. The activation energy for the degradation are determined using the Arrhenius equation The activation energies for the rubber blends are higher than for elastomers based on pure rubbers. It was found that the mass loss of the blends at any temperature was between those of the pure rubbers. The differential scanning calorimetry (DSC) was used for the glass transition temperature determination. It is estimated thermodynamic immiscibility of NBR/CSM blend based on noticed two different glass transition temperatures, corresponding to CSM and NBR rubbers.",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Thermal stability of acrylonitrile/chlorosulphonated polyethylene rubber blend",
volume = "97",
number = "3",
pages = "999-1006",
doi = "10.1007/s10973-009-0162-9"
}

Marković, G., Marinović-Cincović, M., Vodnik, V., Radovanović, B., Budinski-Simendić, J. K.,& Veljkovic, O.. (2009). Thermal stability of acrylonitrile/chlorosulphonated polyethylene rubber blend. in Journal of Thermal Analysis and Calorimetry, 97(3), 999-1006.
https://doi.org/10.1007/s10973-009-0162-9

Marković G, Marinović-Cincović M, Vodnik V, Radovanović B, Budinski-Simendić JK, Veljkovic O. Thermal stability of acrylonitrile/chlorosulphonated polyethylene rubber blend. in Journal of Thermal Analysis and Calorimetry. 2009;97(3):999-1006.
doi:10.1007/s10973-009-0162-9 .

Marković, Gordana, Marinović-Cincović, Milena, Vodnik, Vesna, Radovanović, Blaga, Budinski-Simendić, Jaroslava K., Veljkovic, Olivera, "Thermal stability of acrylonitrile/chlorosulphonated polyethylene rubber blend" in Journal of Thermal Analysis and Calorimetry, 97, no. 3 (2009):999-1006,
https://doi.org/10.1007/s10973-009-0162-9 . .

TY  - CONF
AU  - Marković, Gordana
AU  - Radovanović, Blaga
AU  - Marinović-Cincović, Milena
PY  - 2008
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9395
AB  - The effects of two type active filler (carbon black and silica) on the characteristics of elastomers based on natural rubber and chlorosulphonated polyethylene rubber blend blend (NR/CSM) were investigated. For cure studies, torque-time curves were registered at different temperatures (150, 160 and 170°C). It was estimated that higher curing temperature cause decreas of the cure plateau torque and lead to higher crosslinking rate constant.
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2008 : 9th international conference on fundamental and applied aspects of physical chemistry
T1  - The influence of dual active fillers on curing characteristics of elastomers based on natural rubber and chlorosulphonated polyethylene rubber
VL  - 2
SP  - 570
EP  - 572
UR  - https://hdl.handle.net/21.15107/rcub_vinar_9395
ER  - 

@conference{
author = "Marković, Gordana and Radovanović, Blaga and Marinović-Cincović, Milena",
year = "2008",
abstract = "The effects of two type active filler (carbon black and silica) on the characteristics of elastomers based on natural rubber and chlorosulphonated polyethylene rubber blend blend (NR/CSM) were investigated. For cure studies, torque-time curves were registered at different temperatures (150, 160 and 170°C). It was estimated that higher curing temperature cause decreas of the cure plateau torque and lead to higher crosslinking rate constant.",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2008 : 9th international conference on fundamental and applied aspects of physical chemistry",
title = "The influence of dual active fillers on curing characteristics of elastomers based on natural rubber and chlorosulphonated polyethylene rubber",
volume = "2",
pages = "570-572",
url = "https://hdl.handle.net/21.15107/rcub_vinar_9395"
}

Marković, G., Radovanović, B.,& Marinović-Cincović, M.. (2008). The influence of dual active fillers on curing characteristics of elastomers based on natural rubber and chlorosulphonated polyethylene rubber. in Physical chemistry 2008 : 9th international conference on fundamental and applied aspects of physical chemistry
Society of Physical Chemists of Serbia., 2, 570-572.
https://hdl.handle.net/21.15107/rcub_vinar_9395

Marković G, Radovanović B, Marinović-Cincović M. The influence of dual active fillers on curing characteristics of elastomers based on natural rubber and chlorosulphonated polyethylene rubber. in Physical chemistry 2008 : 9th international conference on fundamental and applied aspects of physical chemistry. 2008;2:570-572.
https://hdl.handle.net/21.15107/rcub_vinar_9395 .

Marković, Gordana, Radovanović, Blaga, Marinović-Cincović, Milena, "The influence of dual active fillers on curing characteristics of elastomers based on natural rubber and chlorosulphonated polyethylene rubber" in Physical chemistry 2008 : 9th international conference on fundamental and applied aspects of physical chemistry, 2 (2008):570-572,
https://hdl.handle.net/21.15107/rcub_vinar_9395 .

TY  - CONF
AU  - Marković, Gordana
AU  - Radovanović, Blaga
AU  - Marinović-Cincović, Milena
AU  - Budinski-Simendić, Jaroslava K.
PY  - 2008
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9396
AB  - The effect of carbon black (average particle size 26nm) and wood flour (particle size from 300 to 400 μm) on thermal ageing and γ-radiation resistance of polyisoprene /chlorosulphonated polyethylene rubber blend (NR/CSM) was studied. The tensile strength of the aged samples was determined, after conditioning at 70°C during 72h. The radiation exposure of samples was performed at two doses: 212 and 400 kGy.
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2008 : 9th international conference on fundamental and applied aspects of physical chemistry
T1  - Thermal ageing and γ-radiation resistance of polyisoprene /chlorosulphonated polyethylene rubber blends
VL  - 2
SP  - 579
EP  - 581
UR  - https://hdl.handle.net/21.15107/rcub_vinar_9396
ER  - 

@conference{
author = "Marković, Gordana and Radovanović, Blaga and Marinović-Cincović, Milena and Budinski-Simendić, Jaroslava K.",
year = "2008",
abstract = "The effect of carbon black (average particle size 26nm) and wood flour (particle size from 300 to 400 μm) on thermal ageing and γ-radiation resistance of polyisoprene /chlorosulphonated polyethylene rubber blend (NR/CSM) was studied. The tensile strength of the aged samples was determined, after conditioning at 70°C during 72h. The radiation exposure of samples was performed at two doses: 212 and 400 kGy.",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2008 : 9th international conference on fundamental and applied aspects of physical chemistry",
title = "Thermal ageing and γ-radiation resistance of polyisoprene /chlorosulphonated polyethylene rubber blends",
volume = "2",
pages = "579-581",
url = "https://hdl.handle.net/21.15107/rcub_vinar_9396"
}

Marković, G., Radovanović, B., Marinović-Cincović, M.,& Budinski-Simendić, J. K.. (2008). Thermal ageing and γ-radiation resistance of polyisoprene /chlorosulphonated polyethylene rubber blends. in Physical chemistry 2008 : 9th international conference on fundamental and applied aspects of physical chemistry
Society of Physical Chemists of Serbia., 2, 579-581.
https://hdl.handle.net/21.15107/rcub_vinar_9396

Marković G, Radovanović B, Marinović-Cincović M, Budinski-Simendić JK. Thermal ageing and γ-radiation resistance of polyisoprene /chlorosulphonated polyethylene rubber blends. in Physical chemistry 2008 : 9th international conference on fundamental and applied aspects of physical chemistry. 2008;2:579-581.
https://hdl.handle.net/21.15107/rcub_vinar_9396 .

Marković, Gordana, Radovanović, Blaga, Marinović-Cincović, Milena, Budinski-Simendić, Jaroslava K., "Thermal ageing and γ-radiation resistance of polyisoprene /chlorosulphonated polyethylene rubber blends" in Physical chemistry 2008 : 9th international conference on fundamental and applied aspects of physical chemistry, 2 (2008):579-581,
https://hdl.handle.net/21.15107/rcub_vinar_9396 .

TY  - JOUR
AU  - Konstantinovic, Sandra S.
AU  - Radovanović, Blaga
AU  - Krklješ, Aleksandra N.
PY  - 2007
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6704
AB  - The isatin-beta-thiosemicarbazone (ITC) complexes of Co(II), Ni(II), Cu(II), Zn(II), Hg(II) and Pd(II) were prepared and characterized by elemental analysis, as well as molar conductivity, magnetic susceptibility, FTIR, UV-Vis and H-1 NMR spectroscopic methods. The complexes were also studied for its thermal stability. They all behaviour as anhydrous complexes and its thermolysis passes through the stages of deamination (517-547 K) and complete thermal decomposition (619-735 K).
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Thermal behaviour of Co(II), Ni(II), Cu(II), Zn(II), Hg(II) and Pd(II) complexes with isatin-beta-thiosemicarbazone
VL  - 90
IS  - 2
SP  - 525
EP  - 531
DO  - 10.1007/s10973-006-7794-9
ER  - 

@article{
author = "Konstantinovic, Sandra S. and Radovanović, Blaga and Krklješ, Aleksandra N.",
year = "2007",
abstract = "The isatin-beta-thiosemicarbazone (ITC) complexes of Co(II), Ni(II), Cu(II), Zn(II), Hg(II) and Pd(II) were prepared and characterized by elemental analysis, as well as molar conductivity, magnetic susceptibility, FTIR, UV-Vis and H-1 NMR spectroscopic methods. The complexes were also studied for its thermal stability. They all behaviour as anhydrous complexes and its thermolysis passes through the stages of deamination (517-547 K) and complete thermal decomposition (619-735 K).",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Thermal behaviour of Co(II), Ni(II), Cu(II), Zn(II), Hg(II) and Pd(II) complexes with isatin-beta-thiosemicarbazone",
volume = "90",
number = "2",
pages = "525-531",
doi = "10.1007/s10973-006-7794-9"
}

Konstantinovic, S. S., Radovanović, B.,& Krklješ, A. N.. (2007). Thermal behaviour of Co(II), Ni(II), Cu(II), Zn(II), Hg(II) and Pd(II) complexes with isatin-beta-thiosemicarbazone. in Journal of Thermal Analysis and Calorimetry, 90(2), 525-531.
https://doi.org/10.1007/s10973-006-7794-9

Konstantinovic SS, Radovanović B, Krklješ AN. Thermal behaviour of Co(II), Ni(II), Cu(II), Zn(II), Hg(II) and Pd(II) complexes with isatin-beta-thiosemicarbazone. in Journal of Thermal Analysis and Calorimetry. 2007;90(2):525-531.
doi:10.1007/s10973-006-7794-9 .

Konstantinovic, Sandra S., Radovanović, Blaga, Krklješ, Aleksandra N., "Thermal behaviour of Co(II), Ni(II), Cu(II), Zn(II), Hg(II) and Pd(II) complexes with isatin-beta-thiosemicarbazone" in Journal of Thermal Analysis and Calorimetry, 90, no. 2 (2007):525-531,
https://doi.org/10.1007/s10973-006-7794-9 . .

TY  - CONF
AU  - Marković, Gordana
AU  - Marinović-Cincović, Milena
AU  - Radovanović, Blaga
PY  - 2006
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9462
AB  - The effect of recycled rubber powder (RRP) on cure characteristics of styrene butadiene and chlorosulphonated polyethylene rubber blends (SBR/CSM) was investigated in the concentration range of 0 to 20 phr. Results indicate that the minimum torque and Mooney viscosity of the SBR/CSM rubber blends increase with increasing RRP loading whereas the scorch time and cure time exhibit a decreasing trend. Increasing RRP loading also gives SBR/CSM rubber compounds reduces the elongation at break but the tensile stress, M 200 (stress at 200% elongation) increases slightly.
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2006: 8th international conference on fundemental and applied aspract of physical chemistry
T1  - Cure characteristics of recycled rubber powder filled styrene butadiene /chlorosulphonated polyethylene rubber blends
SP  - 394
EP  - 396
UR  - https://hdl.handle.net/21.15107/rcub_vinar_9462
ER  - 

@conference{
author = "Marković, Gordana and Marinović-Cincović, Milena and Radovanović, Blaga",
year = "2006",
abstract = "The effect of recycled rubber powder (RRP) on cure characteristics of styrene butadiene and chlorosulphonated polyethylene rubber blends (SBR/CSM) was investigated in the concentration range of 0 to 20 phr. Results indicate that the minimum torque and Mooney viscosity of the SBR/CSM rubber blends increase with increasing RRP loading whereas the scorch time and cure time exhibit a decreasing trend. Increasing RRP loading also gives SBR/CSM rubber compounds reduces the elongation at break but the tensile stress, M 200 (stress at 200% elongation) increases slightly.",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2006: 8th international conference on fundemental and applied aspract of physical chemistry",
title = "Cure characteristics of recycled rubber powder filled styrene butadiene /chlorosulphonated polyethylene rubber blends",
pages = "394-396",
url = "https://hdl.handle.net/21.15107/rcub_vinar_9462"
}

Marković, G., Marinović-Cincović, M.,& Radovanović, B.. (2006). Cure characteristics of recycled rubber powder filled styrene butadiene /chlorosulphonated polyethylene rubber blends. in Physical chemistry 2006: 8th international conference on fundemental and applied aspract of physical chemistry
Society of Physical Chemists of Serbia., 394-396.
https://hdl.handle.net/21.15107/rcub_vinar_9462

Marković G, Marinović-Cincović M, Radovanović B. Cure characteristics of recycled rubber powder filled styrene butadiene /chlorosulphonated polyethylene rubber blends. in Physical chemistry 2006: 8th international conference on fundemental and applied aspract of physical chemistry. 2006;:394-396.
https://hdl.handle.net/21.15107/rcub_vinar_9462 .

Marković, Gordana, Marinović-Cincović, Milena, Radovanović, Blaga, "Cure characteristics of recycled rubber powder filled styrene butadiene /chlorosulphonated polyethylene rubber blends" in Physical chemistry 2006: 8th international conference on fundemental and applied aspract of physical chemistry (2006):394-396,
https://hdl.handle.net/21.15107/rcub_vinar_9462 .

TY  - JOUR
AU  - Marković, Gordana
AU  - Marinović-Cincović, Milena
AU  - Valentova, H
AU  - Ilavsky, Mihal
AU  - Radovanović, Blaga
AU  - Budinski-Simendić, Jaroslava K.
PY  - 2005
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6538
AB  - This paper deals with the control of the adhesion strength in metal-elastomer joints by fillers and the use of rubber blends to produce advanced high performance adhesive systems. The curing behavior of rubber compounds and dynamic mechanical properties of crosslinked rubber composites were considered in this technologically applicable study. The effects of two types of reinforcing filler, used to increase the adhesion strength between steel and rubber matrix based on acrylonitrile-butadiene rubber (NBR) and chlorosulfonated polyethylene rubber (CSM) was investigated. Precipitated silica (with the average size of primary particle 15 nm) and diatomaceous earth (with the average size of primary particle 28 mu m) were used for both rubber and its blend (NBR/CSM). The filler loading range was from 0 to 35 phr. The determination of curing characteristics was estimated by Monsanto Rheometer. The crosslink density of the rubber composites was determined by swelling measurement. Dynamic mechanical behavior was measured by mechanical spectroscopy (in a single cantilever bending mode).
T2  - Materials Science Forum
T1  - Curing characteristics and dynamic mechanical behaviour of reinforced acrylonitrile-butadiene/chlorosulfonated polyethylene rubber blends
VL  - 494
SP  - 475
EP  - 480
DO  - 10.4028/www.scientific.net/MSF.494.475
ER  - 

@article{
author = "Marković, Gordana and Marinović-Cincović, Milena and Valentova, H and Ilavsky, Mihal and Radovanović, Blaga and Budinski-Simendić, Jaroslava K.",
year = "2005",
abstract = "This paper deals with the control of the adhesion strength in metal-elastomer joints by fillers and the use of rubber blends to produce advanced high performance adhesive systems. The curing behavior of rubber compounds and dynamic mechanical properties of crosslinked rubber composites were considered in this technologically applicable study. The effects of two types of reinforcing filler, used to increase the adhesion strength between steel and rubber matrix based on acrylonitrile-butadiene rubber (NBR) and chlorosulfonated polyethylene rubber (CSM) was investigated. Precipitated silica (with the average size of primary particle 15 nm) and diatomaceous earth (with the average size of primary particle 28 mu m) were used for both rubber and its blend (NBR/CSM). The filler loading range was from 0 to 35 phr. The determination of curing characteristics was estimated by Monsanto Rheometer. The crosslink density of the rubber composites was determined by swelling measurement. Dynamic mechanical behavior was measured by mechanical spectroscopy (in a single cantilever bending mode).",
journal = "Materials Science Forum",
title = "Curing characteristics and dynamic mechanical behaviour of reinforced acrylonitrile-butadiene/chlorosulfonated polyethylene rubber blends",
volume = "494",
pages = "475-480",
doi = "10.4028/www.scientific.net/MSF.494.475"
}

Marković, G., Marinović-Cincović, M., Valentova, H., Ilavsky, M., Radovanović, B.,& Budinski-Simendić, J. K.. (2005). Curing characteristics and dynamic mechanical behaviour of reinforced acrylonitrile-butadiene/chlorosulfonated polyethylene rubber blends. in Materials Science Forum, 494, 475-480.
https://doi.org/10.4028/www.scientific.net/MSF.494.475

Marković G, Marinović-Cincović M, Valentova H, Ilavsky M, Radovanović B, Budinski-Simendić JK. Curing characteristics and dynamic mechanical behaviour of reinforced acrylonitrile-butadiene/chlorosulfonated polyethylene rubber blends. in Materials Science Forum. 2005;494:475-480.
doi:10.4028/www.scientific.net/MSF.494.475 .

Marković, Gordana, Marinović-Cincović, Milena, Valentova, H, Ilavsky, Mihal, Radovanović, Blaga, Budinski-Simendić, Jaroslava K., "Curing characteristics and dynamic mechanical behaviour of reinforced acrylonitrile-butadiene/chlorosulfonated polyethylene rubber blends" in Materials Science Forum, 494 (2005):475-480,
https://doi.org/10.4028/www.scientific.net/MSF.494.475 . .

TY  - JOUR
AU  - Marković, Gordana
AU  - Radovanović, Blaga
AU  - Budinski-Simendić, Jaroslava K.
AU  - Marinović-Cincović, Milena
PY  - 2005
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2905
AB  - The dependence of the Mooney scorch time and cure index on the blend ratio of chlorosulphonated polyethylene/natural rubber (CSM/SMR 20 CV) and chlorosulphonated polyethylene/chlorinated natural rubber (CSM/Pergut S 40) blends were determined in the temperature range from 120 C to 160 C using a Monsanto Mooney viscometer. Semi-efficient vulcanization systems were used for the study. The morphology of the fracture surface of the crosslinked systems was determined by Scanning Electron Microscopy (SEM). The results showed that the scorch time decreased with increasing SMR 20 CV and Pergut S 40 contents. This observation is attributed to the increasing solubility of sulfur, as the content of SMR 20 CV and Pergut S 40 in the composition increased. For temperatures greater than 140 C, the dependence of the scorch time on blend ratios diminishes, as enough thermal energy is available to overcome the activation energy of vulcanization. The differing curing characteristics of the two blends is explained by the compatibility factor of the respective blend. Morphological analysis of the blends shows a very satisfactory agreement.
T2  - Journal of the Serbian Chemical Society
T1  - Curing characteristics of chlorosulphonated polyethylene and natural rubber blends
VL  - 70
IS  - 5
SP  - 695
EP  - 703
DO  - 10.2298/JSC0505695M
ER  - 

@article{
author = "Marković, Gordana and Radovanović, Blaga and Budinski-Simendić, Jaroslava K. and Marinović-Cincović, Milena",
year = "2005",
abstract = "The dependence of the Mooney scorch time and cure index on the blend ratio of chlorosulphonated polyethylene/natural rubber (CSM/SMR 20 CV) and chlorosulphonated polyethylene/chlorinated natural rubber (CSM/Pergut S 40) blends were determined in the temperature range from 120 C to 160 C using a Monsanto Mooney viscometer. Semi-efficient vulcanization systems were used for the study. The morphology of the fracture surface of the crosslinked systems was determined by Scanning Electron Microscopy (SEM). The results showed that the scorch time decreased with increasing SMR 20 CV and Pergut S 40 contents. This observation is attributed to the increasing solubility of sulfur, as the content of SMR 20 CV and Pergut S 40 in the composition increased. For temperatures greater than 140 C, the dependence of the scorch time on blend ratios diminishes, as enough thermal energy is available to overcome the activation energy of vulcanization. The differing curing characteristics of the two blends is explained by the compatibility factor of the respective blend. Morphological analysis of the blends shows a very satisfactory agreement.",
journal = "Journal of the Serbian Chemical Society",
title = "Curing characteristics of chlorosulphonated polyethylene and natural rubber blends",
volume = "70",
number = "5",
pages = "695-703",
doi = "10.2298/JSC0505695M"
}

Marković, G., Radovanović, B., Budinski-Simendić, J. K.,& Marinović-Cincović, M.. (2005). Curing characteristics of chlorosulphonated polyethylene and natural rubber blends. in Journal of the Serbian Chemical Society, 70(5), 695-703.
https://doi.org/10.2298/JSC0505695M

Marković G, Radovanović B, Budinski-Simendić JK, Marinović-Cincović M. Curing characteristics of chlorosulphonated polyethylene and natural rubber blends. in Journal of the Serbian Chemical Society. 2005;70(5):695-703.
doi:10.2298/JSC0505695M .

Marković, Gordana, Radovanović, Blaga, Budinski-Simendić, Jaroslava K., Marinović-Cincović, Milena, "Curing characteristics of chlorosulphonated polyethylene and natural rubber blends" in Journal of the Serbian Chemical Society, 70, no. 5 (2005):695-703,
https://doi.org/10.2298/JSC0505695M . .

TY  - JOUR
AU  - Marković, Gordana
AU  - Radovanović, Blaga
AU  - Budinski-Simendić, Jaroslava K.
AU  - Marinović-Cincović, Milena
PY  - 2004
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2710
AB  - Acrylonitrile-butadiene rubber (NBR), polychloroprene rubber (CR). chlorosulphonated polyethylene rubber (CSM) and their blends were cross-linked with sulphur, ethylene-thiourea. magnesium oxide or their combination. The effect of nano- and micro- particle sized of 35 pphr SiO2 on the thermostability and surface morphology of all the crosslinked systems,vas investigated. Identification of the structure of nano- and micro- particle sized SiO2 filled NBR/CSM and CR/CSM crosslinked systems was carried out by Fourier transform infrared spectroscopy (FTIR) with an attenuated total reflectance (ATR) extension. The thermal stability of the nano- and micro- particle sized SiO2 filled NBR/CSM and CR/CSM crosslinked systems were carried out by thermogravimetric analysis (TGA). The glass transition temperature (T-g) of the samples was determined by differential Scanning calorimetry (DSC). The morphology of the fracture surface of the crosslinked systems was carried out by scanning electron microscope (SEM). The results show when filled with nano-particle sized of SiO2 NBR/CSM and CR/CSM polymer matrix have a strong peak from SiO-C at 1079 cm(-1). This suggests the an interaction between the SiO2, which should lead to an increased thermal stability, higher values of T-g, better dispersion the nano-SiO2 and more polish, without cracks than micro-filled NBR/CSM and CR/CSM crosslinked systems.
T2  - Journal of the Serbian Chemical Society
T1  - Thermostability and surface morphology of nano- and micro-filled NBR/CSM and CR/CSM rubber blends
VL  - 69
IS  - 2
SP  - 167
EP  - 173
DO  - 10.2298/JSC0402167M
ER  - 

@article{
author = "Marković, Gordana and Radovanović, Blaga and Budinski-Simendić, Jaroslava K. and Marinović-Cincović, Milena",
year = "2004",
abstract = "Acrylonitrile-butadiene rubber (NBR), polychloroprene rubber (CR). chlorosulphonated polyethylene rubber (CSM) and their blends were cross-linked with sulphur, ethylene-thiourea. magnesium oxide or their combination. The effect of nano- and micro- particle sized of 35 pphr SiO2 on the thermostability and surface morphology of all the crosslinked systems,vas investigated. Identification of the structure of nano- and micro- particle sized SiO2 filled NBR/CSM and CR/CSM crosslinked systems was carried out by Fourier transform infrared spectroscopy (FTIR) with an attenuated total reflectance (ATR) extension. The thermal stability of the nano- and micro- particle sized SiO2 filled NBR/CSM and CR/CSM crosslinked systems were carried out by thermogravimetric analysis (TGA). The glass transition temperature (T-g) of the samples was determined by differential Scanning calorimetry (DSC). The morphology of the fracture surface of the crosslinked systems was carried out by scanning electron microscope (SEM). The results show when filled with nano-particle sized of SiO2 NBR/CSM and CR/CSM polymer matrix have a strong peak from SiO-C at 1079 cm(-1). This suggests the an interaction between the SiO2, which should lead to an increased thermal stability, higher values of T-g, better dispersion the nano-SiO2 and more polish, without cracks than micro-filled NBR/CSM and CR/CSM crosslinked systems.",
journal = "Journal of the Serbian Chemical Society",
title = "Thermostability and surface morphology of nano- and micro-filled NBR/CSM and CR/CSM rubber blends",
volume = "69",
number = "2",
pages = "167-173",
doi = "10.2298/JSC0402167M"
}

Marković, G., Radovanović, B., Budinski-Simendić, J. K.,& Marinović-Cincović, M.. (2004). Thermostability and surface morphology of nano- and micro-filled NBR/CSM and CR/CSM rubber blends. in Journal of the Serbian Chemical Society, 69(2), 167-173.
https://doi.org/10.2298/JSC0402167M

Marković G, Radovanović B, Budinski-Simendić JK, Marinović-Cincović M. Thermostability and surface morphology of nano- and micro-filled NBR/CSM and CR/CSM rubber blends. in Journal of the Serbian Chemical Society. 2004;69(2):167-173.
doi:10.2298/JSC0402167M .

Marković, Gordana, Radovanović, Blaga, Budinski-Simendić, Jaroslava K., Marinović-Cincović, Milena, "Thermostability and surface morphology of nano- and micro-filled NBR/CSM and CR/CSM rubber blends" in Journal of the Serbian Chemical Society, 69, no. 2 (2004):167-173,
https://doi.org/10.2298/JSC0402167M . .

TY  - JOUR
AU  - Konstantinovic, SS
AU  - Radovanović, Blaga
AU  - Cakic, Z
AU  - Vasić, Vesna M.
PY  - 2003
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2671
AB  - Complexes of Co(II), Ni(II), Cu(II) and Zn(II) with 3-salicylidenehydrazono-2-indolinone were prepared. Their structure was established to be [MLC]Cl-. by using elemental analysis and molar conductivity. as well as AA, FTIR, UV/VIS and H-1-NMR spectroscopic methods. The spectral studies indicated a square-planar geometry for the Ni(II) and Cu(II) complexes and a tetrahedral one for the Co(II) and Zn(II) complexes. The complexes were tested for antibacterial activity against Slaphylococcus aureus, Enterococcus D. Proteus mirabilis. Escherichia coli. Bacillus anthracis, Pseudomonas aeruginosa and Candida albicans.
T2  - Journal of the Serbian Chemical Society
T1  - Synthesis and characterization of Co(II), Ni(II), Cu(II) and Zn(II) complexes with 3-salicylidenehydrazono-2-indolinone
VL  - 68
IS  - 8-9
SP  - 641
EP  - 647
DO  - 10.2298/JSC0309641K
ER  - 

@article{
author = "Konstantinovic, SS and Radovanović, Blaga and Cakic, Z and Vasić, Vesna M.",
year = "2003",
abstract = "Complexes of Co(II), Ni(II), Cu(II) and Zn(II) with 3-salicylidenehydrazono-2-indolinone were prepared. Their structure was established to be [MLC]Cl-. by using elemental analysis and molar conductivity. as well as AA, FTIR, UV/VIS and H-1-NMR spectroscopic methods. The spectral studies indicated a square-planar geometry for the Ni(II) and Cu(II) complexes and a tetrahedral one for the Co(II) and Zn(II) complexes. The complexes were tested for antibacterial activity against Slaphylococcus aureus, Enterococcus D. Proteus mirabilis. Escherichia coli. Bacillus anthracis, Pseudomonas aeruginosa and Candida albicans.",
journal = "Journal of the Serbian Chemical Society",
title = "Synthesis and characterization of Co(II), Ni(II), Cu(II) and Zn(II) complexes with 3-salicylidenehydrazono-2-indolinone",
volume = "68",
number = "8-9",
pages = "641-647",
doi = "10.2298/JSC0309641K"
}

Konstantinovic, S., Radovanović, B., Cakic, Z.,& Vasić, V. M.. (2003). Synthesis and characterization of Co(II), Ni(II), Cu(II) and Zn(II) complexes with 3-salicylidenehydrazono-2-indolinone. in Journal of the Serbian Chemical Society, 68(8-9), 641-647.
https://doi.org/10.2298/JSC0309641K

Konstantinovic S, Radovanović B, Cakic Z, Vasić VM. Synthesis and characterization of Co(II), Ni(II), Cu(II) and Zn(II) complexes with 3-salicylidenehydrazono-2-indolinone. in Journal of the Serbian Chemical Society. 2003;68(8-9):641-647.
doi:10.2298/JSC0309641K .

Konstantinovic, SS, Radovanović, Blaga, Cakic, Z, Vasić, Vesna M., "Synthesis and characterization of Co(II), Ni(II), Cu(II) and Zn(II) complexes with 3-salicylidenehydrazono-2-indolinone" in Journal of the Serbian Chemical Society, 68, no. 8-9 (2003):641-647,
https://doi.org/10.2298/JSC0309641K . .