TY  - CONF
AU  - Stevanović, M.
AU  - Ignjatović, Nenad L.
AU  - Miličević, Dejan S.
AU  - Uskoković, Dragan
PY  - 2006
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9447
AB  - Using a new approach of synthesis, homogenisation of DLPLG polymer powder and BCP gel, BCP/DLPLG composite material has been obtained with morphological and structural characteristics making it potentially very suitable for practical application in certain fields of the reconstructive medicine. The composite material has been synthesised with different ratios of ceramics and polymer BCP/DLPLG; 65/35w/w, 10/90 w/w, 5/95 w/w and 2/98w/w. The samples were characterized by Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM).
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2006: 8th international conference on fundemental and applied aspract of physical chemistry
T1  - Preparation of composite material BCP/DLPLG with a different content of ceramic and polymer component
SP  - 498
EP  - 500
UR  - https://hdl.handle.net/21.15107/rcub_vinar_9447
ER  - 

@conference{
author = "Stevanović, M. and Ignjatović, Nenad L. and Miličević, Dejan S. and Uskoković, Dragan",
year = "2006",
abstract = "Using a new approach of synthesis, homogenisation of DLPLG polymer powder and BCP gel, BCP/DLPLG composite material has been obtained with morphological and structural characteristics making it potentially very suitable for practical application in certain fields of the reconstructive medicine. The composite material has been synthesised with different ratios of ceramics and polymer BCP/DLPLG; 65/35w/w, 10/90 w/w, 5/95 w/w and 2/98w/w. The samples were characterized by Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM).",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2006: 8th international conference on fundemental and applied aspract of physical chemistry",
title = "Preparation of composite material BCP/DLPLG with a different content of ceramic and polymer component",
pages = "498-500",
url = "https://hdl.handle.net/21.15107/rcub_vinar_9447"
}

Stevanović, M., Ignjatović, N. L., Miličević, D. S.,& Uskoković, D.. (2006). Preparation of composite material BCP/DLPLG with a different content of ceramic and polymer component. in Physical chemistry 2006: 8th international conference on fundemental and applied aspract of physical chemistry
Society of Physical Chemists of Serbia., 498-500.
https://hdl.handle.net/21.15107/rcub_vinar_9447

Stevanović M, Ignjatović NL, Miličević DS, Uskoković D. Preparation of composite material BCP/DLPLG with a different content of ceramic and polymer component. in Physical chemistry 2006: 8th international conference on fundemental and applied aspract of physical chemistry. 2006;:498-500.
https://hdl.handle.net/21.15107/rcub_vinar_9447 .

Stevanović, M., Ignjatović, Nenad L., Miličević, Dejan S., Uskoković, Dragan, "Preparation of composite material BCP/DLPLG with a different content of ceramic and polymer component" in Physical chemistry 2006: 8th international conference on fundemental and applied aspract of physical chemistry (2006):498-500,
https://hdl.handle.net/21.15107/rcub_vinar_9447 .

TY  - JOUR
AU  - Stevanović, M.
AU  - Gordić, Milan V.
AU  - Sekulić, Dalibor L.
AU  - Djordjevic, I
PY  - 2006
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/3029
AB  - The effect of edge interlaminar stresses on strength of carbon/epoxy laminates of different stacking geometry: cross-ply, quasi-isotropic and angle-ply laminates with additional 0 degrees and 90 degrees ply was studied. Coupons with two widths of laminates with an inverse stacking sequence were tested in static tensile tests. The effect of edge interlaminar stresses on strength was Studied, by comparing the values of the tensile strength of laminate coupons of the same width with an inverse stacking sequence, as well as, by comparing the values of the tensile strength of the same lay-up laminate coupons but of different widths. The edge effects were analysed by observing failure, identifying the interlayer where axial cracks at the free edge were initiated or inhibited and by computing interlaminar stresses and strains in the interlayer near the free edge of the coupon. The established edge effect was first correlated to the sign of the normal edge interlaminar stress. The extent of the edge effect was then successfully correlated to the edge interlaminar normal stress normalized to the size of the edge boundary region in which the stress appeared.
T2  - Journal of the Serbian Chemical Society
T1  - The effect of edge interlaminar stresses on the strength of carbon/epoxy laminates of different stacking geometry
VL  - 71
IS  - 4
SP  - 421
EP  - 431
DO  - 10.2298/JSC0604421S
ER  - 

@article{
author = "Stevanović, M. and Gordić, Milan V. and Sekulić, Dalibor L. and Djordjevic, I",
year = "2006",
abstract = "The effect of edge interlaminar stresses on strength of carbon/epoxy laminates of different stacking geometry: cross-ply, quasi-isotropic and angle-ply laminates with additional 0 degrees and 90 degrees ply was studied. Coupons with two widths of laminates with an inverse stacking sequence were tested in static tensile tests. The effect of edge interlaminar stresses on strength was Studied, by comparing the values of the tensile strength of laminate coupons of the same width with an inverse stacking sequence, as well as, by comparing the values of the tensile strength of the same lay-up laminate coupons but of different widths. The edge effects were analysed by observing failure, identifying the interlayer where axial cracks at the free edge were initiated or inhibited and by computing interlaminar stresses and strains in the interlayer near the free edge of the coupon. The established edge effect was first correlated to the sign of the normal edge interlaminar stress. The extent of the edge effect was then successfully correlated to the edge interlaminar normal stress normalized to the size of the edge boundary region in which the stress appeared.",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of edge interlaminar stresses on the strength of carbon/epoxy laminates of different stacking geometry",
volume = "71",
number = "4",
pages = "421-431",
doi = "10.2298/JSC0604421S"
}

Stevanović, M., Gordić, M. V., Sekulić, D. L.,& Djordjevic, I.. (2006). The effect of edge interlaminar stresses on the strength of carbon/epoxy laminates of different stacking geometry. in Journal of the Serbian Chemical Society, 71(4), 421-431.
https://doi.org/10.2298/JSC0604421S

Stevanović M, Gordić MV, Sekulić DL, Djordjevic I. The effect of edge interlaminar stresses on the strength of carbon/epoxy laminates of different stacking geometry. in Journal of the Serbian Chemical Society. 2006;71(4):421-431.
doi:10.2298/JSC0604421S .

Stevanović, M., Gordić, Milan V., Sekulić, Dalibor L., Djordjevic, I, "The effect of edge interlaminar stresses on the strength of carbon/epoxy laminates of different stacking geometry" in Journal of the Serbian Chemical Society, 71, no. 4 (2006):421-431,
https://doi.org/10.2298/JSC0604421S . .

TY  - JOUR
AU  - Stevanović, M.
AU  - Sekulic, DP
PY  - 2003
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2699
AB  - Effects of different factors on the measured values of flexural modulus and flexural strength of unidirectional carbon/epoxy composites are investigated. This allows a correct interpretation of the results of flexural macromechanical properties obtained in three-point flexure tests. The shear deformation, the displacement of neutral axis front the mid-depth of the beam, and the nonuniform distribution of stresses in bent coupons are discussed.
T2  - Mechanics of Composite Materials
T1  - Macromechanical characteristics deduced from three-point flexure tests on unidirectional carbon/epoxy composites
VL  - 39
IS  - 5
SP  - 387
EP  - 392
DO  - 10.1023/B:MOCM.0000003288.75552.cb
ER  - 

@article{
author = "Stevanović, M. and Sekulic, DP",
year = "2003",
abstract = "Effects of different factors on the measured values of flexural modulus and flexural strength of unidirectional carbon/epoxy composites are investigated. This allows a correct interpretation of the results of flexural macromechanical properties obtained in three-point flexure tests. The shear deformation, the displacement of neutral axis front the mid-depth of the beam, and the nonuniform distribution of stresses in bent coupons are discussed.",
journal = "Mechanics of Composite Materials",
title = "Macromechanical characteristics deduced from three-point flexure tests on unidirectional carbon/epoxy composites",
volume = "39",
number = "5",
pages = "387-392",
doi = "10.1023/B:MOCM.0000003288.75552.cb"
}

Stevanović, M.,& Sekulic, D.. (2003). Macromechanical characteristics deduced from three-point flexure tests on unidirectional carbon/epoxy composites. in Mechanics of Composite Materials, 39(5), 387-392.
https://doi.org/10.1023/B:MOCM.0000003288.75552.cb

Stevanović M, Sekulic D. Macromechanical characteristics deduced from three-point flexure tests on unidirectional carbon/epoxy composites. in Mechanics of Composite Materials. 2003;39(5):387-392.
doi:10.1023/B:MOCM.0000003288.75552.cb .

Stevanović, M., Sekulic, DP, "Macromechanical characteristics deduced from three-point flexure tests on unidirectional carbon/epoxy composites" in Mechanics of Composite Materials, 39, no. 5 (2003):387-392,
https://doi.org/10.1023/B:MOCM.0000003288.75552.cb . .