TY  - JOUR
AU  - Romčević, Nebojša
AU  - Hadžić, Branka
AU  - Prekajski-Đorđević, Marija D.
AU  - Mihailović, Peđa
AU  - Ćurčić, Milica
AU  - Trajić, Jelena
AU  - Mitrić, Jelena
AU  - Romčević, Maja J.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11027
AB  - The effect of laser (532 nm line of Verdi G) heating during the Raman measurements, on partial decomposition of Bi12SiO20 single crystal, was addressed in this study. The degree of decomposition directly depends on the power density and duration of the laser treatment, which are registered by the phonon Raman spectra. After laser treatment, AFM measurements register additional small spherical islands on the surface. Analysis performed on irradiated and unirradiated samples showed significant changes in transmission spectra, X-ray diffraction (XRD) pattern, Verdet constant, magneto-optical property, and absorption coefficient. The material obtained after laser irradiation can be described as specific nanocomposite consisting of bismuth oxide and silicon oxide-based nano-objects (dimensions below 15 nm in diameter), which are arranged in a matrix of Bi12SiO20.
T2  - Journal of Spectroscopy
T1  - Effect of Laser Heating on Partial Decomposition of Bi12SiO20 (BSO) Single Crystal: Raman Study
VL  - InPress
SP  - e5490018
DO  - 10.1155/2023/5490018
ER  - 

@article{
author = "Romčević, Nebojša and Hadžić, Branka and Prekajski-Đorđević, Marija D. and Mihailović, Peđa and Ćurčić, Milica and Trajić, Jelena and Mitrić, Jelena and Romčević, Maja J.",
year = "2023",
abstract = "The effect of laser (532 nm line of Verdi G) heating during the Raman measurements, on partial decomposition of Bi12SiO20 single crystal, was addressed in this study. The degree of decomposition directly depends on the power density and duration of the laser treatment, which are registered by the phonon Raman spectra. After laser treatment, AFM measurements register additional small spherical islands on the surface. Analysis performed on irradiated and unirradiated samples showed significant changes in transmission spectra, X-ray diffraction (XRD) pattern, Verdet constant, magneto-optical property, and absorption coefficient. The material obtained after laser irradiation can be described as specific nanocomposite consisting of bismuth oxide and silicon oxide-based nano-objects (dimensions below 15 nm in diameter), which are arranged in a matrix of Bi12SiO20.",
journal = "Journal of Spectroscopy",
title = "Effect of Laser Heating on Partial Decomposition of Bi12SiO20 (BSO) Single Crystal: Raman Study",
volume = "InPress",
pages = "e5490018",
doi = "10.1155/2023/5490018"
}

Romčević, N., Hadžić, B., Prekajski-Đorđević, M. D., Mihailović, P., Ćurčić, M., Trajić, J., Mitrić, J.,& Romčević, M. J.. (2023). Effect of Laser Heating on Partial Decomposition of Bi12SiO20 (BSO) Single Crystal: Raman Study. in Journal of Spectroscopy, InPress, e5490018.
https://doi.org/10.1155/2023/5490018

Romčević N, Hadžić B, Prekajski-Đorđević MD, Mihailović P, Ćurčić M, Trajić J, Mitrić J, Romčević MJ. Effect of Laser Heating on Partial Decomposition of Bi12SiO20 (BSO) Single Crystal: Raman Study. in Journal of Spectroscopy. 2023;InPress:e5490018.
doi:10.1155/2023/5490018 .

Romčević, Nebojša, Hadžić, Branka, Prekajski-Đorđević, Marija D., Mihailović, Peđa, Ćurčić, Milica, Trajić, Jelena, Mitrić, Jelena, Romčević, Maja J., "Effect of Laser Heating on Partial Decomposition of Bi12SiO20 (BSO) Single Crystal: Raman Study" in Journal of Spectroscopy, InPress (2023):e5490018,
https://doi.org/10.1155/2023/5490018 . .

TY  - JOUR
AU  - Radisavljević, Ivana
AU  - Novaković, Nikola
AU  - Mahnke, Heinz-Eberhard
AU  - Romčević, Nebojša Ž.
AU  - Mitrić, Miodrag
AU  - Kuzmanović, Bojana
AU  - Ivanović, Nenad
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10268
AB  - As an extension of our previous studies of multi-component semiconductors doped with magnetic impurities, this paper gives a comprehensive insight into electronic and local structure of crystalline semiconductors Cd0.98Co0.02Se, Cd0.98Co0.02Se0.9S0.1, and Cd0.98Co0.02Se0.9Te0.1. Detailed characterization of Co and Se local environment and overall influence of Co and S(Te) (co)doping on the host crystal structure has been obtained by X-ray absorption fine structure (XAFS) technique and electronic structure calculations. Important structural information on bond lengths and disorder parameters were extracted from the extended region of the absorption spectra, while the relationships between electronic and local structures were determined from the characteristic features appearing in the near-edge spectral region. The influence of various structural defects on local electronic properties, charge transfer and atomic interactions has been studied by theoretical modeling of XAFS spectra and calculations of local density of electronic states. The obtained findings offer possible means for improvement and extension of the practical application of CdSe-based materials by adjusting the details of their electronic structure.
T2  - Journal of the Physical Society of Japan
T1  - Survey of Electronic and Local Structural Properties of Cd1−xCoxSe1−yTe(S)y by XAFS
VL  - 91
IS  - 5
SP  - 054801
DO  - 10.7566/JPSJ.91.054801
ER  - 

@article{
author = "Radisavljević, Ivana and Novaković, Nikola and Mahnke, Heinz-Eberhard and Romčević, Nebojša Ž. and Mitrić, Miodrag and Kuzmanović, Bojana and Ivanović, Nenad",
year = "2022",
abstract = "As an extension of our previous studies of multi-component semiconductors doped with magnetic impurities, this paper gives a comprehensive insight into electronic and local structure of crystalline semiconductors Cd0.98Co0.02Se, Cd0.98Co0.02Se0.9S0.1, and Cd0.98Co0.02Se0.9Te0.1. Detailed characterization of Co and Se local environment and overall influence of Co and S(Te) (co)doping on the host crystal structure has been obtained by X-ray absorption fine structure (XAFS) technique and electronic structure calculations. Important structural information on bond lengths and disorder parameters were extracted from the extended region of the absorption spectra, while the relationships between electronic and local structures were determined from the characteristic features appearing in the near-edge spectral region. The influence of various structural defects on local electronic properties, charge transfer and atomic interactions has been studied by theoretical modeling of XAFS spectra and calculations of local density of electronic states. The obtained findings offer possible means for improvement and extension of the practical application of CdSe-based materials by adjusting the details of their electronic structure.",
journal = "Journal of the Physical Society of Japan",
title = "Survey of Electronic and Local Structural Properties of Cd1−xCoxSe1−yTe(S)y by XAFS",
volume = "91",
number = "5",
pages = "054801",
doi = "10.7566/JPSJ.91.054801"
}

Radisavljević, I., Novaković, N., Mahnke, H., Romčević, N. Ž., Mitrić, M., Kuzmanović, B.,& Ivanović, N.. (2022). Survey of Electronic and Local Structural Properties of Cd1−xCoxSe1−yTe(S)y by XAFS. in Journal of the Physical Society of Japan, 91(5), 054801.
https://doi.org/10.7566/JPSJ.91.054801

Radisavljević I, Novaković N, Mahnke H, Romčević NŽ, Mitrić M, Kuzmanović B, Ivanović N. Survey of Electronic and Local Structural Properties of Cd1−xCoxSe1−yTe(S)y by XAFS. in Journal of the Physical Society of Japan. 2022;91(5):054801.
doi:10.7566/JPSJ.91.054801 .

Radisavljević, Ivana, Novaković, Nikola, Mahnke, Heinz-Eberhard, Romčević, Nebojša Ž., Mitrić, Miodrag, Kuzmanović, Bojana, Ivanović, Nenad, "Survey of Electronic and Local Structural Properties of Cd1−xCoxSe1−yTe(S)y by XAFS" in Journal of the Physical Society of Japan, 91, no. 5 (2022):054801,
https://doi.org/10.7566/JPSJ.91.054801 . .

TY  - JOUR
AU  - Mitrić, Jelena
AU  - Paunović, Novica M.
AU  - Mitrić, Miodrag
AU  - Ćirković, Jovana
AU  - Gilić, Martina D.
AU  - Romčević, Maja J.
AU  - Romčević, Nebojša Ž.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9904
AB  - In this paper two methods of preparation of yttrium orthovanadate nanopowders were presented: Solid State Reaction (top – down approach) and Solution Combustion Synthesis (bottom – up approach). For starting structural characterization, X – Ray Powder Diffraction (XPRD) and Field Emission Scanning Electron Microscopy (FESEM) were used. We report the change in reflection spectra in europium doped YVO4 nanopowders with comparison to its bulk analog. In UV–Vis reflection spectra we consider the change in values of band gap in these structures, after resizing it from bulk to nanomaterial. In Far – Infrared (FIR) reflection spectra, we registered the existence of Surface Optical Phonon (SOP) and different multi – phonon processes which alter the reflection spectra of bulk YVO4. The influence of Eu ions is reflected through multi – phonon processes that occur and are connected with energy transfer from YVO4 lattice to Eu ions. All IR spectra were modeled using classical oscillator model with Drude part added which takes into account the free carrier contribution. Since our samples are distinctively inhomogeneous materials, we use Effective Medium theory in Maxwell Garnett approximation to model its effective dieletric function.
T2  - Physica E: Low-dimensional Systems and Nanostructures
T1  - Surface optical phonon and multi – phonon transitions in YVO4:Eu3+ nanopowders
VL  - 134
SP  - 114923
DO  - 10.1016/j.physe.2021.114923
ER  - 

@article{
author = "Mitrić, Jelena and Paunović, Novica M. and Mitrić, Miodrag and Ćirković, Jovana and Gilić, Martina D. and Romčević, Maja J. and Romčević, Nebojša Ž.",
year = "2021",
abstract = "In this paper two methods of preparation of yttrium orthovanadate nanopowders were presented: Solid State Reaction (top – down approach) and Solution Combustion Synthesis (bottom – up approach). For starting structural characterization, X – Ray Powder Diffraction (XPRD) and Field Emission Scanning Electron Microscopy (FESEM) were used. We report the change in reflection spectra in europium doped YVO4 nanopowders with comparison to its bulk analog. In UV–Vis reflection spectra we consider the change in values of band gap in these structures, after resizing it from bulk to nanomaterial. In Far – Infrared (FIR) reflection spectra, we registered the existence of Surface Optical Phonon (SOP) and different multi – phonon processes which alter the reflection spectra of bulk YVO4. The influence of Eu ions is reflected through multi – phonon processes that occur and are connected with energy transfer from YVO4 lattice to Eu ions. All IR spectra were modeled using classical oscillator model with Drude part added which takes into account the free carrier contribution. Since our samples are distinctively inhomogeneous materials, we use Effective Medium theory in Maxwell Garnett approximation to model its effective dieletric function.",
journal = "Physica E: Low-dimensional Systems and Nanostructures",
title = "Surface optical phonon and multi – phonon transitions in YVO4:Eu3+ nanopowders",
volume = "134",
pages = "114923",
doi = "10.1016/j.physe.2021.114923"
}

Mitrić, J., Paunović, N. M., Mitrić, M., Ćirković, J., Gilić, M. D., Romčević, M. J.,& Romčević, N. Ž.. (2021). Surface optical phonon and multi – phonon transitions in YVO4:Eu3+ nanopowders. in Physica E: Low-dimensional Systems and Nanostructures, 134, 114923.
https://doi.org/10.1016/j.physe.2021.114923

Mitrić J, Paunović NM, Mitrić M, Ćirković J, Gilić MD, Romčević MJ, Romčević NŽ. Surface optical phonon and multi – phonon transitions in YVO4:Eu3+ nanopowders. in Physica E: Low-dimensional Systems and Nanostructures. 2021;134:114923.
doi:10.1016/j.physe.2021.114923 .

Mitrić, Jelena, Paunović, Novica M., Mitrić, Miodrag, Ćirković, Jovana, Gilić, Martina D., Romčević, Maja J., Romčević, Nebojša Ž., "Surface optical phonon and multi – phonon transitions in YVO4:Eu3+ nanopowders" in Physica E: Low-dimensional Systems and Nanostructures, 134 (2021):114923,
https://doi.org/10.1016/j.physe.2021.114923 . .

TY  - JOUR
AU  - Hadžić, Branka B.
AU  - Matović, Branko
AU  - Ranđelović, Marjan S.
AU  - Kostić, Radmila
AU  - Romčević, Maja J.
AU  - Trajić, Jelena
AU  - Paunović, Novica
AU  - Romčević, Nebojša Ž.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9788
AB  - In the present work experimental study of the ZnO@ZnS core-shell nanostructure with an active layer obtained by conversion of zinc oxide powders with H2S is reported. Тhe prepared structures were characterized by scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and far-infrared spectroscopy. Top surface optical phonon (TSO) in ZnO, characteristic for the cylindrical nano-objects, the surface optical phonon (SOP) mode of ZnS, and SOP modes in ZnO@ZnS core-shell nanostructure are registered. Local mode of oxygen in ZnS and gap mode of sulfur in ZnO are also registered. This result is due to the existence of an active layer in the space between ZnO core and ZnS shell, which is very important for the application of these materials as thermoelectrics. © 2020 John Wiley & Sons, Ltd.
T2  - Journal of Raman Spectroscopy
T1  - Phonons investigation of ZnO@ZnS core-shell nanostructures with active layer
VL  - 52
IS  - 3
SP  - 616
EP  - 625
DO  - 10.1002/jrs.6058
ER  - 

@article{
author = "Hadžić, Branka B. and Matović, Branko and Ranđelović, Marjan S. and Kostić, Radmila and Romčević, Maja J. and Trajić, Jelena and Paunović, Novica and Romčević, Nebojša Ž.",
year = "2021",
abstract = "In the present work experimental study of the ZnO@ZnS core-shell nanostructure with an active layer obtained by conversion of zinc oxide powders with H2S is reported. Тhe prepared structures were characterized by scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and far-infrared spectroscopy. Top surface optical phonon (TSO) in ZnO, characteristic for the cylindrical nano-objects, the surface optical phonon (SOP) mode of ZnS, and SOP modes in ZnO@ZnS core-shell nanostructure are registered. Local mode of oxygen in ZnS and gap mode of sulfur in ZnO are also registered. This result is due to the existence of an active layer in the space between ZnO core and ZnS shell, which is very important for the application of these materials as thermoelectrics. © 2020 John Wiley & Sons, Ltd.",
journal = "Journal of Raman Spectroscopy",
title = "Phonons investigation of ZnO@ZnS core-shell nanostructures with active layer",
volume = "52",
number = "3",
pages = "616-625",
doi = "10.1002/jrs.6058"
}

Hadžić, B. B., Matović, B., Ranđelović, M. S., Kostić, R., Romčević, M. J., Trajić, J., Paunović, N.,& Romčević, N. Ž.. (2021). Phonons investigation of ZnO@ZnS core-shell nanostructures with active layer. in Journal of Raman Spectroscopy, 52(3), 616-625.
https://doi.org/10.1002/jrs.6058

Hadžić BB, Matović B, Ranđelović MS, Kostić R, Romčević MJ, Trajić J, Paunović N, Romčević NŽ. Phonons investigation of ZnO@ZnS core-shell nanostructures with active layer. in Journal of Raman Spectroscopy. 2021;52(3):616-625.
doi:10.1002/jrs.6058 .

Hadžić, Branka B., Matović, Branko, Ranđelović, Marjan S., Kostić, Radmila, Romčević, Maja J., Trajić, Jelena, Paunović, Novica, Romčević, Nebojša Ž., "Phonons investigation of ZnO@ZnS core-shell nanostructures with active layer" in Journal of Raman Spectroscopy, 52, no. 3 (2021):616-625,
https://doi.org/10.1002/jrs.6058 . .

TY  - JOUR
AU  - Medić-Ilić, Mirjana
AU  - Bundaleski, Nenad
AU  - Ivanović, Nenad
AU  - Teodoro, Orlando M. N. D.
AU  - Rakočević, Zlatko Lj.
AU  - Minić, Dragica M.
AU  - Romčević, Nebojša Ž.
AU  - Radisavljević, Ivana
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8910
AB  - Recently introduced model for quantitative analysis of in-depth non-uniform surfaces is applied to reexamine the X-ray Photoelectron Spectroscopy (XPS) data of Cd0.99Fe0.01Te0.97Se0.03 and Zn0.98Fe0.02Te0.91Se0.09 crystalline samples. Special attention is paid to the precise identification of phases which form the bulk-like near-surface region and the surface overlayers (the oxide layer and the layer of organic impurities), as well as the influence of surface morphology on the measurements. The obtained results fully support earlier qualitative estimations, but also provide new quantitative insight into the composition of the three investigated regions. The near-surface region of Cd0.99Fe0.01Te0.97Se0.03 and Zn0.98Fe0.02Te0.91Se0.09 samples is slightly electropositive, with cation/anion ratio 52:48 and 53:47, respectively. Model surface structures, which are fully compatible with the experimental results, comprise 0.76 nm thick CdTeO3 layer at the surface of Cd0.99Fe0.01Te0.97Se0.03 and 0.33 nm thick mixed ZnO/TeO2 oxide layer on Zn0.98Fe0.02Te0.91Se0.09. In both samples the oxide layer is only a few atomic layers thick, implying that it suppresses further rapid migration of oxygen into the bulk.
T2  - Vacuum
T1  - XPS measurements of air-exposed Cd(Zn)1xFexTe1ySey surfaces revisited
VL  - 176
SP  - 109340
DO  - 10.1016/j.vacuum.2020.109340
ER  - 

@article{
author = "Medić-Ilić, Mirjana and Bundaleski, Nenad and Ivanović, Nenad and Teodoro, Orlando M. N. D. and Rakočević, Zlatko Lj. and Minić, Dragica M. and Romčević, Nebojša Ž. and Radisavljević, Ivana",
year = "2020",
abstract = "Recently introduced model for quantitative analysis of in-depth non-uniform surfaces is applied to reexamine the X-ray Photoelectron Spectroscopy (XPS) data of Cd0.99Fe0.01Te0.97Se0.03 and Zn0.98Fe0.02Te0.91Se0.09 crystalline samples. Special attention is paid to the precise identification of phases which form the bulk-like near-surface region and the surface overlayers (the oxide layer and the layer of organic impurities), as well as the influence of surface morphology on the measurements. The obtained results fully support earlier qualitative estimations, but also provide new quantitative insight into the composition of the three investigated regions. The near-surface region of Cd0.99Fe0.01Te0.97Se0.03 and Zn0.98Fe0.02Te0.91Se0.09 samples is slightly electropositive, with cation/anion ratio 52:48 and 53:47, respectively. Model surface structures, which are fully compatible with the experimental results, comprise 0.76 nm thick CdTeO3 layer at the surface of Cd0.99Fe0.01Te0.97Se0.03 and 0.33 nm thick mixed ZnO/TeO2 oxide layer on Zn0.98Fe0.02Te0.91Se0.09. In both samples the oxide layer is only a few atomic layers thick, implying that it suppresses further rapid migration of oxygen into the bulk.",
journal = "Vacuum",
title = "XPS measurements of air-exposed Cd(Zn)1xFexTe1ySey surfaces revisited",
volume = "176",
pages = "109340",
doi = "10.1016/j.vacuum.2020.109340"
}

Medić-Ilić, M., Bundaleski, N., Ivanović, N., Teodoro, O. M. N. D., Rakočević, Z. Lj., Minić, D. M., Romčević, N. Ž.,& Radisavljević, I.. (2020). XPS measurements of air-exposed Cd(Zn)1xFexTe1ySey surfaces revisited. in Vacuum, 176, 109340.
https://doi.org/10.1016/j.vacuum.2020.109340

Medić-Ilić M, Bundaleski N, Ivanović N, Teodoro OMND, Rakočević ZL, Minić DM, Romčević NŽ, Radisavljević I. XPS measurements of air-exposed Cd(Zn)1xFexTe1ySey surfaces revisited. in Vacuum. 2020;176:109340.
doi:10.1016/j.vacuum.2020.109340 .

Medić-Ilić, Mirjana, Bundaleski, Nenad, Ivanović, Nenad, Teodoro, Orlando M. N. D., Rakočević, Zlatko Lj., Minić, Dragica M., Romčević, Nebojša Ž., Radisavljević, Ivana, "XPS measurements of air-exposed Cd(Zn)1xFexTe1ySey surfaces revisited" in Vacuum, 176 (2020):109340,
https://doi.org/10.1016/j.vacuum.2020.109340 . .

TY  - JOUR
AU  - Ćurčić, Milica
AU  - Hadžić, Branka B.
AU  - Gilić, Martina
AU  - Radojević, Vesna
AU  - Bjelajac, Anđelika
AU  - Radović, Ivana M.
AU  - Timotijević, Dejan
AU  - Romčević, Maja J.
AU  - Trajić, Jelena
AU  - Romčević, Nebojša Ž.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8494
AB  - The polymer nanocomposite ZnS/Poly (methylmethacrylate) was prepared by the solution casting method and its structural and optical properties were investigated using XRD, SEM, TEM, HRTEM, and Raman spectroscopy. The basic material, ZnS, has the cubic structure and its crystallite size was estimated to be 2.3 nm, which implies that a strong confinement regime is in effect. Analysis of Raman spectra was performed using the fitting procedure based on effective medium theory. As a result, the surface optical phonon (SOP) mode was detected. It was found that the shape and position of the SOP mode depend on the type of the composite. © 2019 Elsevier B.V.
T2  - Physica E: Low-dimensional Systems and Nanostructures
T1  - Surface optical phonon (SOP) mode in ZnS/Poly (methylmethacrylate) nanocomposites
VL  - 115
SP  - 113708
DO  - 10.1016/j.physe.2019.113708
ER  - 

@article{
author = "Ćurčić, Milica and Hadžić, Branka B. and Gilić, Martina and Radojević, Vesna and Bjelajac, Anđelika and Radović, Ivana M. and Timotijević, Dejan and Romčević, Maja J. and Trajić, Jelena and Romčević, Nebojša Ž.",
year = "2020",
abstract = "The polymer nanocomposite ZnS/Poly (methylmethacrylate) was prepared by the solution casting method and its structural and optical properties were investigated using XRD, SEM, TEM, HRTEM, and Raman spectroscopy. The basic material, ZnS, has the cubic structure and its crystallite size was estimated to be 2.3 nm, which implies that a strong confinement regime is in effect. Analysis of Raman spectra was performed using the fitting procedure based on effective medium theory. As a result, the surface optical phonon (SOP) mode was detected. It was found that the shape and position of the SOP mode depend on the type of the composite. © 2019 Elsevier B.V.",
journal = "Physica E: Low-dimensional Systems and Nanostructures",
title = "Surface optical phonon (SOP) mode in ZnS/Poly (methylmethacrylate) nanocomposites",
volume = "115",
pages = "113708",
doi = "10.1016/j.physe.2019.113708"
}

Ćurčić, M., Hadžić, B. B., Gilić, M., Radojević, V., Bjelajac, A., Radović, I. M., Timotijević, D., Romčević, M. J., Trajić, J.,& Romčević, N. Ž.. (2020). Surface optical phonon (SOP) mode in ZnS/Poly (methylmethacrylate) nanocomposites. in Physica E: Low-dimensional Systems and Nanostructures, 115, 113708.
https://doi.org/10.1016/j.physe.2019.113708

Ćurčić M, Hadžić BB, Gilić M, Radojević V, Bjelajac A, Radović IM, Timotijević D, Romčević MJ, Trajić J, Romčević NŽ. Surface optical phonon (SOP) mode in ZnS/Poly (methylmethacrylate) nanocomposites. in Physica E: Low-dimensional Systems and Nanostructures. 2020;115:113708.
doi:10.1016/j.physe.2019.113708 .

Ćurčić, Milica, Hadžić, Branka B., Gilić, Martina, Radojević, Vesna, Bjelajac, Anđelika, Radović, Ivana M., Timotijević, Dejan, Romčević, Maja J., Trajić, Jelena, Romčević, Nebojša Ž., "Surface optical phonon (SOP) mode in ZnS/Poly (methylmethacrylate) nanocomposites" in Physica E: Low-dimensional Systems and Nanostructures, 115 (2020):113708,
https://doi.org/10.1016/j.physe.2019.113708 . .

TY  - JOUR
AU  - Radisavljević, Ivana
AU  - Novaković, Nikola
AU  - Mahnke, Heinz-Eberhard
AU  - Andrić, Velibor
AU  - Kurko, Sandra V.
AU  - Milivojević, Dušan
AU  - Romčević, Nebojša Ž.
AU  - Ivanović, Nenad
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8004
AB  - Paper presents detailed studies of local and electronic structure around Fe in Cd0.97Fe0.03Te, Cd0.98Fe0.02Te0.97Se0.03 and Cd0.99Fe0.01Te0.91S0.09 multinary chalcogenides by means of X–ray absorption fine structure (XAFS), X–ray magnetic circular dichroism (XMCD) and electron paramagnetic resonance (EPR) measurements. In addition, electronic consequences of Fe incorporation into CdTe semiconductor host were studied by means of first principles calculations. In order to improve accuracy of the calculated total energies, the band gaps and the band edge positions, special attention is paid to the treatment of exchange–correlation interaction and the description of highly localized Fe 3d–states. Also, the Bader theory of the topological properties of the electron charge density is used to access details of the nature, strength and distribution of the (next) nearest neighbour bonds. Local and electronic structure around Fe in Cd0.97Fe0.03Te and Cd0.98Fe0.02Te0.97Se0.03 systems have been found to exhibit similar characteristics, since the first coordination sphere around Fe comprises four Te atoms located at approximately the same distance. In Cd0.99Fe0.01Te0.91S0.09 system, however, local bimodal distribution of distances has been revealed, with one Fe–Te bond replaced with much shorter Fe–S bond, resulting in much stronger crystal–field. Along with the crystal field effect, the spin–orbit interaction has proven to play decisive role in determining the nature of Fe doped CdTe systems. While the systems with higher Fe concentrations (25 at.%) are intrinsic insulators, in systems with only 3.125 at.% Fe one spin channel contributes to the density of states at the Fermi level, which makes them suitable for spin selective electronic transport applications. © 2018 Elsevier B.V.
T2  - Journal of Alloys and Compounds
T1  - Survey of electronic properties and local structures around Fe in selected multinary chalcogenides
VL  - 782
SP  - 160
EP  - 169
DO  - 10.1016/j.jallcom.2018.12.167
ER  - 

@article{
author = "Radisavljević, Ivana and Novaković, Nikola and Mahnke, Heinz-Eberhard and Andrić, Velibor and Kurko, Sandra V. and Milivojević, Dušan and Romčević, Nebojša Ž. and Ivanović, Nenad",
year = "2019",
abstract = "Paper presents detailed studies of local and electronic structure around Fe in Cd0.97Fe0.03Te, Cd0.98Fe0.02Te0.97Se0.03 and Cd0.99Fe0.01Te0.91S0.09 multinary chalcogenides by means of X–ray absorption fine structure (XAFS), X–ray magnetic circular dichroism (XMCD) and electron paramagnetic resonance (EPR) measurements. In addition, electronic consequences of Fe incorporation into CdTe semiconductor host were studied by means of first principles calculations. In order to improve accuracy of the calculated total energies, the band gaps and the band edge positions, special attention is paid to the treatment of exchange–correlation interaction and the description of highly localized Fe 3d–states. Also, the Bader theory of the topological properties of the electron charge density is used to access details of the nature, strength and distribution of the (next) nearest neighbour bonds. Local and electronic structure around Fe in Cd0.97Fe0.03Te and Cd0.98Fe0.02Te0.97Se0.03 systems have been found to exhibit similar characteristics, since the first coordination sphere around Fe comprises four Te atoms located at approximately the same distance. In Cd0.99Fe0.01Te0.91S0.09 system, however, local bimodal distribution of distances has been revealed, with one Fe–Te bond replaced with much shorter Fe–S bond, resulting in much stronger crystal–field. Along with the crystal field effect, the spin–orbit interaction has proven to play decisive role in determining the nature of Fe doped CdTe systems. While the systems with higher Fe concentrations (25 at.%) are intrinsic insulators, in systems with only 3.125 at.% Fe one spin channel contributes to the density of states at the Fermi level, which makes them suitable for spin selective electronic transport applications. © 2018 Elsevier B.V.",
journal = "Journal of Alloys and Compounds",
title = "Survey of electronic properties and local structures around Fe in selected multinary chalcogenides",
volume = "782",
pages = "160-169",
doi = "10.1016/j.jallcom.2018.12.167"
}

Radisavljević, I., Novaković, N., Mahnke, H., Andrić, V., Kurko, S. V., Milivojević, D., Romčević, N. Ž.,& Ivanović, N.. (2019). Survey of electronic properties and local structures around Fe in selected multinary chalcogenides. in Journal of Alloys and Compounds, 782, 160-169.
https://doi.org/10.1016/j.jallcom.2018.12.167

Radisavljević I, Novaković N, Mahnke H, Andrić V, Kurko SV, Milivojević D, Romčević NŽ, Ivanović N. Survey of electronic properties and local structures around Fe in selected multinary chalcogenides. in Journal of Alloys and Compounds. 2019;782:160-169.
doi:10.1016/j.jallcom.2018.12.167 .

Radisavljević, Ivana, Novaković, Nikola, Mahnke, Heinz-Eberhard, Andrić, Velibor, Kurko, Sandra V., Milivojević, Dušan, Romčević, Nebojša Ž., Ivanović, Nenad, "Survey of electronic properties and local structures around Fe in selected multinary chalcogenides" in Journal of Alloys and Compounds, 782 (2019):160-169,
https://doi.org/10.1016/j.jallcom.2018.12.167 . .

TY  - JOUR
AU  - Lazarević, Zorica Ž.
AU  - Križan, Gregor
AU  - Križan, Janez
AU  - Mitrić, Miodrag
AU  - Paunović, Novica M.
AU  - Milutinović, Aleksandra N.
AU  - Romčević, Nebojša Ž.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8437
AB  - Lithium iron phosphate (LiFePO4) are synthesized in complete and incomplete combustion and calcined at 700°C. The obtained samples were characterized by XRD, IR spectroscopy and magnetic measurement. Morphology of samples was controlled by SEM. The aim of this work is to show that it is possible to achieve a desired crystal phase by pulse combustion in a relatively cheap and fast way. The extremely rapid synthesis of almost pure phase material is possible due to the reduction in size of interacting particles and to an enormous number of collisions between them as a result of the strong turbulent flow associated with explosive combustion. © 2019 Optoelectronics and Advanced Materials, Rapid Communications. All rights reserved.
T2  - Optoelectronics and Advanced Materials, Rapid Communications
T1  - Synthesis and spectroscopic characterisation of LiFePO4 cathode materials
VL  - 13
IS  - 3-4
SP  - 228
EP  - 234
UR  - https://hdl.handle.net/21.15107/rcub_vinar_8437
ER  - 

@article{
author = "Lazarević, Zorica Ž. and Križan, Gregor and Križan, Janez and Mitrić, Miodrag and Paunović, Novica M. and Milutinović, Aleksandra N. and Romčević, Nebojša Ž.",
year = "2019",
abstract = "Lithium iron phosphate (LiFePO4) are synthesized in complete and incomplete combustion and calcined at 700°C. The obtained samples were characterized by XRD, IR spectroscopy and magnetic measurement. Morphology of samples was controlled by SEM. The aim of this work is to show that it is possible to achieve a desired crystal phase by pulse combustion in a relatively cheap and fast way. The extremely rapid synthesis of almost pure phase material is possible due to the reduction in size of interacting particles and to an enormous number of collisions between them as a result of the strong turbulent flow associated with explosive combustion. © 2019 Optoelectronics and Advanced Materials, Rapid Communications. All rights reserved.",
journal = "Optoelectronics and Advanced Materials, Rapid Communications",
title = "Synthesis and spectroscopic characterisation of LiFePO4 cathode materials",
volume = "13",
number = "3-4",
pages = "228-234",
url = "https://hdl.handle.net/21.15107/rcub_vinar_8437"
}

Lazarević, Z. Ž., Križan, G., Križan, J., Mitrić, M., Paunović, N. M., Milutinović, A. N.,& Romčević, N. Ž.. (2019). Synthesis and spectroscopic characterisation of LiFePO4 cathode materials. in Optoelectronics and Advanced Materials, Rapid Communications, 13(3-4), 228-234.
https://hdl.handle.net/21.15107/rcub_vinar_8437

Lazarević ZŽ, Križan G, Križan J, Mitrić M, Paunović NM, Milutinović AN, Romčević NŽ. Synthesis and spectroscopic characterisation of LiFePO4 cathode materials. in Optoelectronics and Advanced Materials, Rapid Communications. 2019;13(3-4):228-234.
https://hdl.handle.net/21.15107/rcub_vinar_8437 .

Lazarević, Zorica Ž., Križan, Gregor, Križan, Janez, Mitrić, Miodrag, Paunović, Novica M., Milutinović, Aleksandra N., Romčević, Nebojša Ž., "Synthesis and spectroscopic characterisation of LiFePO4 cathode materials" in Optoelectronics and Advanced Materials, Rapid Communications, 13, no. 3-4 (2019):228-234,
https://hdl.handle.net/21.15107/rcub_vinar_8437 .

TY  - JOUR
AU  - Lazarević, Zorica Ž.
AU  - Križan, Gregor
AU  - Križan, Janez
AU  - Milutinović, Aleksandra N.
AU  - Ivanovski, Valentin N.
AU  - Mitrić, Miodrag
AU  - Gilić, Martina
AU  - Umićević, Ana
AU  - Kuryliszyn-Kudelska, Izabela
AU  - Romčević, Nebojša Ž.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8501
AB  - Lithium iron phosphate (LiFePO4, LFP) is one of the widely used cathode materials for rechargeable lithium ion batteries. LFP batteries are widely used for electric vehicles and backup power due to their important advantages such as low cost, lifetime, efficiency, and reliability. There are still several technical challenges that need to be addressed: The increase of energy density or further reduction of their final cost. This paper concerned with the characterization of carbon coated LiFePO4 nanopowder cathode materials produced under different conditions by pulse combustion for providing energy to the reactor for the synthesis. The reactor was built according to the principles of the thermoacoustic burner on the basis of the Helmholtz resonator. The investigated nanopowders are synthesized by complete and incomplete combustion and calcined at 700 °C. The obtained samples were characterized by X-ray diffraction, Fourier transform infrared, Raman, and Mössbauer spectroscopy. Observed low-Temperature magnetic phase transitions definitively identified the crystal phases. The morphology of samples was controlled by scanning electron microscopy. The aim of this work is to show that it is possible to achieve a desired crystal phase by pulse combustion in a relatively cheap and fast way. The extremely rapid synthesis of almost pure phase material is possible due to the reduction in size of interacting particles and to an enormous number of collisions between them as a result of strong turbulent flow associated with explosive combustion. © 2019 Author(s).
T2  - Journal of Applied Physics
T1  - Characterization of LiFePO4 samples obtained by pulse combustion under various conditions of synthesis
VL  - 126
IS  - 8
SP  - 085109
DO  - 10.1063/1.5100358
ER  - 

@article{
author = "Lazarević, Zorica Ž. and Križan, Gregor and Križan, Janez and Milutinović, Aleksandra N. and Ivanovski, Valentin N. and Mitrić, Miodrag and Gilić, Martina and Umićević, Ana and Kuryliszyn-Kudelska, Izabela and Romčević, Nebojša Ž.",
year = "2019",
abstract = "Lithium iron phosphate (LiFePO4, LFP) is one of the widely used cathode materials for rechargeable lithium ion batteries. LFP batteries are widely used for electric vehicles and backup power due to their important advantages such as low cost, lifetime, efficiency, and reliability. There are still several technical challenges that need to be addressed: The increase of energy density or further reduction of their final cost. This paper concerned with the characterization of carbon coated LiFePO4 nanopowder cathode materials produced under different conditions by pulse combustion for providing energy to the reactor for the synthesis. The reactor was built according to the principles of the thermoacoustic burner on the basis of the Helmholtz resonator. The investigated nanopowders are synthesized by complete and incomplete combustion and calcined at 700 °C. The obtained samples were characterized by X-ray diffraction, Fourier transform infrared, Raman, and Mössbauer spectroscopy. Observed low-Temperature magnetic phase transitions definitively identified the crystal phases. The morphology of samples was controlled by scanning electron microscopy. The aim of this work is to show that it is possible to achieve a desired crystal phase by pulse combustion in a relatively cheap and fast way. The extremely rapid synthesis of almost pure phase material is possible due to the reduction in size of interacting particles and to an enormous number of collisions between them as a result of strong turbulent flow associated with explosive combustion. © 2019 Author(s).",
journal = "Journal of Applied Physics",
title = "Characterization of LiFePO4 samples obtained by pulse combustion under various conditions of synthesis",
volume = "126",
number = "8",
pages = "085109",
doi = "10.1063/1.5100358"
}

Lazarević, Z. Ž., Križan, G., Križan, J., Milutinović, A. N., Ivanovski, V. N., Mitrić, M., Gilić, M., Umićević, A., Kuryliszyn-Kudelska, I.,& Romčević, N. Ž.. (2019). Characterization of LiFePO4 samples obtained by pulse combustion under various conditions of synthesis. in Journal of Applied Physics, 126(8), 085109.
https://doi.org/10.1063/1.5100358

Lazarević ZŽ, Križan G, Križan J, Milutinović AN, Ivanovski VN, Mitrić M, Gilić M, Umićević A, Kuryliszyn-Kudelska I, Romčević NŽ. Characterization of LiFePO4 samples obtained by pulse combustion under various conditions of synthesis. in Journal of Applied Physics. 2019;126(8):085109.
doi:10.1063/1.5100358 .

Lazarević, Zorica Ž., Križan, Gregor, Križan, Janez, Milutinović, Aleksandra N., Ivanovski, Valentin N., Mitrić, Miodrag, Gilić, Martina, Umićević, Ana, Kuryliszyn-Kudelska, Izabela, Romčević, Nebojša Ž., "Characterization of LiFePO4 samples obtained by pulse combustion under various conditions of synthesis" in Journal of Applied Physics, 126, no. 8 (2019):085109,
https://doi.org/10.1063/1.5100358 . .

TY  - JOUR
AU  - Mitrić, Jelena
AU  - Ralević, Uroš
AU  - Mitrić, Miodrag
AU  - Ćirković, Jovana
AU  - Križan, Gregor
AU  - Romčević, Maja J.
AU  - Gilić, Martina
AU  - Romčević, Nebojša Ž.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8555
AB  - In this paper, we describe synthesis and characterization of YVO 4 and Eu 3+ -doped YVO 4 nanopowders. Two methods of preparation were used—solution combustion synthesis (SCS) and classical ceramic method (CCM)—and compared. Morphology and structure of all samples were characterized with atomic-force microscopy (AFM), X-ray diffraction (XRD), and field-emission scanning electron microscopy (SEM). Raman spectroscopy was used to discuss the isotope-like effect. It is confirmed that doping with Eu ions results in a change of Raman spectra of doped samples—new modes arise, and intensity of existing ones change. Influence of different preparation methods on isotope-like effect is presented with detailed calculations of shifted modes. © 2019 John Wiley & Sons, Ltd.
T2  - Journal of Raman Spectroscopy
T1  - Isotope-like effect in YVO4:Eu3+ nanopowders: Raman spectroscopy
VL  - 50
IS  - 6
SP  - 802
EP  - 808
DO  - 10.1002/jrs.5584
ER  - 

@article{
author = "Mitrić, Jelena and Ralević, Uroš and Mitrić, Miodrag and Ćirković, Jovana and Križan, Gregor and Romčević, Maja J. and Gilić, Martina and Romčević, Nebojša Ž.",
year = "2019",
abstract = "In this paper, we describe synthesis and characterization of YVO 4 and Eu 3+ -doped YVO 4 nanopowders. Two methods of preparation were used—solution combustion synthesis (SCS) and classical ceramic method (CCM)—and compared. Morphology and structure of all samples were characterized with atomic-force microscopy (AFM), X-ray diffraction (XRD), and field-emission scanning electron microscopy (SEM). Raman spectroscopy was used to discuss the isotope-like effect. It is confirmed that doping with Eu ions results in a change of Raman spectra of doped samples—new modes arise, and intensity of existing ones change. Influence of different preparation methods on isotope-like effect is presented with detailed calculations of shifted modes. © 2019 John Wiley & Sons, Ltd.",
journal = "Journal of Raman Spectroscopy",
title = "Isotope-like effect in YVO4:Eu3+ nanopowders: Raman spectroscopy",
volume = "50",
number = "6",
pages = "802-808",
doi = "10.1002/jrs.5584"
}

Mitrić, J., Ralević, U., Mitrić, M., Ćirković, J., Križan, G., Romčević, M. J., Gilić, M.,& Romčević, N. Ž.. (2019). Isotope-like effect in YVO4:Eu3+ nanopowders: Raman spectroscopy. in Journal of Raman Spectroscopy, 50(6), 802-808.
https://doi.org/10.1002/jrs.5584

Mitrić J, Ralević U, Mitrić M, Ćirković J, Križan G, Romčević MJ, Gilić M, Romčević NŽ. Isotope-like effect in YVO4:Eu3+ nanopowders: Raman spectroscopy. in Journal of Raman Spectroscopy. 2019;50(6):802-808.
doi:10.1002/jrs.5584 .

Mitrić, Jelena, Ralević, Uroš, Mitrić, Miodrag, Ćirković, Jovana, Križan, Gregor, Romčević, Maja J., Gilić, Martina, Romčević, Nebojša Ž., "Isotope-like effect in YVO4:Eu3+ nanopowders: Raman spectroscopy" in Journal of Raman Spectroscopy, 50, no. 6 (2019):802-808,
https://doi.org/10.1002/jrs.5584 . .

TY  - JOUR
AU  - Hadžić, Branka B.
AU  - Vasić, Borislav Z.
AU  - Matović, Branko
AU  - Kuryliszyn-Kudelska, Izabela
AU  - Dobrowolski, Witold D.
AU  - Romčević, Maja J.
AU  - Romčević, Nebojša Ž.
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7778
AB  - The phase changes of MnO nanoparticles under laser-induced heating have been studied. Previous confirmation of the existence of MnO phase was based on the X-ray diffraction measurements. Here, we report the experimental spectra of nonresonant Raman scattering in the range between 100 and 1,600cm(-1), for a sample irradiated with 8 different laser powers. The laser-induced heating has produced change in existing phases in sample, destruction of MnO phase, and creation of MnO2, Mn3O4, and MnOOH phases along with formation of Mn2+ on the sample surface. These phase changes have been confirmed by X-ray diffraction and atomic force microscopy measurements.
T2  - Journal of Raman Spectroscopy
T1  - Influence of laser-induced heating on MnO nanoparticles
VL  - 49
IS  - 5
SP  - 817
EP  - 821
DO  - 10.1002/jrs.5358
ER  - 

@article{
author = "Hadžić, Branka B. and Vasić, Borislav Z. and Matović, Branko and Kuryliszyn-Kudelska, Izabela and Dobrowolski, Witold D. and Romčević, Maja J. and Romčević, Nebojša Ž.",
year = "2018",
abstract = "The phase changes of MnO nanoparticles under laser-induced heating have been studied. Previous confirmation of the existence of MnO phase was based on the X-ray diffraction measurements. Here, we report the experimental spectra of nonresonant Raman scattering in the range between 100 and 1,600cm(-1), for a sample irradiated with 8 different laser powers. The laser-induced heating has produced change in existing phases in sample, destruction of MnO phase, and creation of MnO2, Mn3O4, and MnOOH phases along with formation of Mn2+ on the sample surface. These phase changes have been confirmed by X-ray diffraction and atomic force microscopy measurements.",
journal = "Journal of Raman Spectroscopy",
title = "Influence of laser-induced heating on MnO nanoparticles",
volume = "49",
number = "5",
pages = "817-821",
doi = "10.1002/jrs.5358"
}

Hadžić, B. B., Vasić, B. Z., Matović, B., Kuryliszyn-Kudelska, I., Dobrowolski, W. D., Romčević, M. J.,& Romčević, N. Ž.. (2018). Influence of laser-induced heating on MnO nanoparticles. in Journal of Raman Spectroscopy, 49(5), 817-821.
https://doi.org/10.1002/jrs.5358

Hadžić BB, Vasić BZ, Matović B, Kuryliszyn-Kudelska I, Dobrowolski WD, Romčević MJ, Romčević NŽ. Influence of laser-induced heating on MnO nanoparticles. in Journal of Raman Spectroscopy. 2018;49(5):817-821.
doi:10.1002/jrs.5358 .

Hadžić, Branka B., Vasić, Borislav Z., Matović, Branko, Kuryliszyn-Kudelska, Izabela, Dobrowolski, Witold D., Romčević, Maja J., Romčević, Nebojša Ž., "Influence of laser-induced heating on MnO nanoparticles" in Journal of Raman Spectroscopy, 49, no. 5 (2018):817-821,
https://doi.org/10.1002/jrs.5358 . .

TY  - JOUR
AU  - Mitrić, Jelena
AU  - Paunović, Novica M.
AU  - Mitrić, Miodrag
AU  - Vasić, Borislav Z.
AU  - Ralević, Uroš
AU  - Trajić, Jelena
AU  - Romčević, Maja J.
AU  - Dobrowolski, Witold D.
AU  - Yahia, Ibrahim S.
AU  - Romčević, Nebojša Ž.
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7808
AB  - Structural and optical properties of CdTe thin films were investigated applying atomic force microscopy (AFM), XRD powder technique, Raman spectroscopy and far–infrared spectroscopy. CdTe thin films were prepared by using thermal evaporation technique. In the analysis of the far – infrared reflection spectra, numerical model for calculating the reflectivity coefficient for system which includes films and substrate has been applied. Effective permittivity of film mixture (CdTe and air) was modeled by Maxwell – Garnet approximation. We reveal the existence of surface optical phonon (SOP) mode and coupled plasmon-SOP modes (CPSOPM). © 2018 Elsevier B.V.
T2  - Physica E: Low-dimensional Systems and Nanostructures
T1  - Surface optical phonon – Plasmon interaction in nanodimensional CdTe thin films
VL  - 104
SP  - 64
EP  - 70
DO  - 10.1016/j.physe.2018.07.021
ER  - 

@article{
author = "Mitrić, Jelena and Paunović, Novica M. and Mitrić, Miodrag and Vasić, Borislav Z. and Ralević, Uroš and Trajić, Jelena and Romčević, Maja J. and Dobrowolski, Witold D. and Yahia, Ibrahim S. and Romčević, Nebojša Ž.",
year = "2018",
abstract = "Structural and optical properties of CdTe thin films were investigated applying atomic force microscopy (AFM), XRD powder technique, Raman spectroscopy and far–infrared spectroscopy. CdTe thin films were prepared by using thermal evaporation technique. In the analysis of the far – infrared reflection spectra, numerical model for calculating the reflectivity coefficient for system which includes films and substrate has been applied. Effective permittivity of film mixture (CdTe and air) was modeled by Maxwell – Garnet approximation. We reveal the existence of surface optical phonon (SOP) mode and coupled plasmon-SOP modes (CPSOPM). © 2018 Elsevier B.V.",
journal = "Physica E: Low-dimensional Systems and Nanostructures",
title = "Surface optical phonon – Plasmon interaction in nanodimensional CdTe thin films",
volume = "104",
pages = "64-70",
doi = "10.1016/j.physe.2018.07.021"
}

Mitrić, J., Paunović, N. M., Mitrić, M., Vasić, B. Z., Ralević, U., Trajić, J., Romčević, M. J., Dobrowolski, W. D., Yahia, I. S.,& Romčević, N. Ž.. (2018). Surface optical phonon – Plasmon interaction in nanodimensional CdTe thin films. in Physica E: Low-dimensional Systems and Nanostructures, 104, 64-70.
https://doi.org/10.1016/j.physe.2018.07.021

Mitrić J, Paunović NM, Mitrić M, Vasić BZ, Ralević U, Trajić J, Romčević MJ, Dobrowolski WD, Yahia IS, Romčević NŽ. Surface optical phonon – Plasmon interaction in nanodimensional CdTe thin films. in Physica E: Low-dimensional Systems and Nanostructures. 2018;104:64-70.
doi:10.1016/j.physe.2018.07.021 .

Mitrić, Jelena, Paunović, Novica M., Mitrić, Miodrag, Vasić, Borislav Z., Ralević, Uroš, Trajić, Jelena, Romčević, Maja J., Dobrowolski, Witold D., Yahia, Ibrahim S., Romčević, Nebojša Ž., "Surface optical phonon – Plasmon interaction in nanodimensional CdTe thin films" in Physica E: Low-dimensional Systems and Nanostructures, 104 (2018):64-70,
https://doi.org/10.1016/j.physe.2018.07.021 . .

TY  - CONF
AU  - Gilić, Martina
AU  - Ćurčić, Milica
AU  - Ćirković, Jovana
AU  - Ralević, Uroš
AU  - Mitrić, Miodrag
AU  - Barudžija, Tanja
AU  - Savić-Šević, Svetlana
AU  - Romčević, Nebojša Ž.
AU  - Yahia, Ibrahim
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10888
AB  - Thin films of Se-CuSe2  of three different thicknesses have been prepared by vacuum evaporation method on a glass substrate at room temperature. Surface morphology was investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The structural characterization of thin film was investigated using Xray diffraction pattern (XRD). The presence of twophase system is observed. One is the solid solution of Cu in Se and the other is lowpressure modification of CuSe2 . The optical properties of the films were investigated by photoluminescence spectroscopy and UV-VIS spectroscopy. CuSe2  exhibits both direct and indirect transitions. According to UV-VIS measurements, the band gap for direct transition is found to be in the range of 2.72–2.75 eV and that for indirect transition is in the range of 1.71–1.75 eV. On the other hand, selenium exhibits direct band gap in the range 2.33-2.36 eV. All estimated band gaps slightly decrease with the increase of the film thickness. Photoluminescence spectra of thin films show emission peaks at about 1.6 and 2.3 eV nm at room temperature, with no observed shift with decreasing temperature. A model is proposed for explaining such anomaly
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : 5th Serbian Ceramic Society Conference : program and the book of abstracts; September 21-23, 2016; Belgrade
T1  - Optical and structural characterization of Se – CuSe2  thin films
SP  - 65
UR  - https://hdl.handle.net/21.15107/rcub_vinar_10888
ER  - 

@conference{
author = "Gilić, Martina and Ćurčić, Milica and Ćirković, Jovana and Ralević, Uroš and Mitrić, Miodrag and Barudžija, Tanja and Savić-Šević, Svetlana and Romčević, Nebojša Ž. and Yahia, Ibrahim",
year = "2017",
abstract = "Thin films of Se-CuSe2  of three different thicknesses have been prepared by vacuum evaporation method on a glass substrate at room temperature. Surface morphology was investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The structural characterization of thin film was investigated using Xray diffraction pattern (XRD). The presence of twophase system is observed. One is the solid solution of Cu in Se and the other is lowpressure modification of CuSe2 . The optical properties of the films were investigated by photoluminescence spectroscopy and UV-VIS spectroscopy. CuSe2  exhibits both direct and indirect transitions. According to UV-VIS measurements, the band gap for direct transition is found to be in the range of 2.72–2.75 eV and that for indirect transition is in the range of 1.71–1.75 eV. On the other hand, selenium exhibits direct band gap in the range 2.33-2.36 eV. All estimated band gaps slightly decrease with the increase of the film thickness. Photoluminescence spectra of thin films show emission peaks at about 1.6 and 2.3 eV nm at room temperature, with no observed shift with decreasing temperature. A model is proposed for explaining such anomaly",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : 5th Serbian Ceramic Society Conference : program and the book of abstracts; September 21-23, 2016; Belgrade",
title = "Optical and structural characterization of Se – CuSe2  thin films",
pages = "65",
url = "https://hdl.handle.net/21.15107/rcub_vinar_10888"
}

Gilić, M., Ćurčić, M., Ćirković, J., Ralević, U., Mitrić, M., Barudžija, T., Savić-Šević, S., Romčević, N. Ž.,& Yahia, I.. (2017). Optical and structural characterization of Se – CuSe2  thin films. in Advanced Ceramics and Application : 5th Serbian Ceramic Society Conference : program and the book of abstracts; September 21-23, 2016; Belgrade
Belgrade : Serbian Ceramic Society., 65.
https://hdl.handle.net/21.15107/rcub_vinar_10888

Gilić M, Ćurčić M, Ćirković J, Ralević U, Mitrić M, Barudžija T, Savić-Šević S, Romčević NŽ, Yahia I. Optical and structural characterization of Se – CuSe2  thin films. in Advanced Ceramics and Application : 5th Serbian Ceramic Society Conference : program and the book of abstracts; September 21-23, 2016; Belgrade. 2017;:65.
https://hdl.handle.net/21.15107/rcub_vinar_10888 .

Gilić, Martina, Ćurčić, Milica, Ćirković, Jovana, Ralević, Uroš, Mitrić, Miodrag, Barudžija, Tanja, Savić-Šević, Svetlana, Romčević, Nebojša Ž., Yahia, Ibrahim, "Optical and structural characterization of Se – CuSe2  thin films" in Advanced Ceramics and Application : 5th Serbian Ceramic Society Conference : program and the book of abstracts; September 21-23, 2016; Belgrade (2017):65,
https://hdl.handle.net/21.15107/rcub_vinar_10888 .

TY  - CONF
AU  - Rabasović, Maja
AU  - Šević, Dragutin
AU  - Križan, Janez
AU  - Rabasović, M. D.
AU  - Savić-Šević, S.
AU  - Mitrić, Miodrag
AU  - Petrović, M.
AU  - Gilić, M.
AU  - Romčević, Nebojša Ž.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10889
AB  - The gadolinium vanadate doped with samarium (GdVO4 :Sm3+) nanopowder was prepared by the solution combustion synthesis (SCS) method. After synthesis, in order to achieve the full crystallinity, the material was annealed in air atmosphere at 1300 °C. Phase identification in the post-annealed powder samples were performed by X-ray diffraction, and morphology was investigated by high resolution scanning electron microscope (SEM). Photoluminescence characterization including excitation and emission spectra and lifetime analysis has been done using tunable laser optical parametric oscillator excitation and streak camera. Several strong emission bands in Sm3+ emission spectrum were observed, located at 563 nm (4 G5/2 – 6 H5/2), 600 nm (4 G5/2 – 6 H7/2,), and 644 (653) nm (4 G5/2 – 6 H9/2,), respectively. The weak emission at 700-710 nm (4 G5/2 – 6 H11/2) was also observed by detection system.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : 5th Serbian Ceramic Society Conference : program and the book of abstracts; September 21-23, 2016; Belgrade
T1  - Annealed nanopowder GdVO4 :Sm3+ prepared by solution combustion synthesis
SP  - 67
EP  - 68
UR  - https://hdl.handle.net/21.15107/rcub_vinar_10889
ER  - 

@conference{
author = "Rabasović, Maja and Šević, Dragutin and Križan, Janez and Rabasović, M. D. and Savić-Šević, S. and Mitrić, Miodrag and Petrović, M. and Gilić, M. and Romčević, Nebojša Ž.",
year = "2017",
abstract = "The gadolinium vanadate doped with samarium (GdVO4 :Sm3+) nanopowder was prepared by the solution combustion synthesis (SCS) method. After synthesis, in order to achieve the full crystallinity, the material was annealed in air atmosphere at 1300 °C. Phase identification in the post-annealed powder samples were performed by X-ray diffraction, and morphology was investigated by high resolution scanning electron microscope (SEM). Photoluminescence characterization including excitation and emission spectra and lifetime analysis has been done using tunable laser optical parametric oscillator excitation and streak camera. Several strong emission bands in Sm3+ emission spectrum were observed, located at 563 nm (4 G5/2 – 6 H5/2), 600 nm (4 G5/2 – 6 H7/2,), and 644 (653) nm (4 G5/2 – 6 H9/2,), respectively. The weak emission at 700-710 nm (4 G5/2 – 6 H11/2) was also observed by detection system.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : 5th Serbian Ceramic Society Conference : program and the book of abstracts; September 21-23, 2016; Belgrade",
title = "Annealed nanopowder GdVO4 :Sm3+ prepared by solution combustion synthesis",
pages = "67-68",
url = "https://hdl.handle.net/21.15107/rcub_vinar_10889"
}

Rabasović, M., Šević, D., Križan, J., Rabasović, M. D., Savić-Šević, S., Mitrić, M., Petrović, M., Gilić, M.,& Romčević, N. Ž.. (2017). Annealed nanopowder GdVO4 :Sm3+ prepared by solution combustion synthesis. in Advanced Ceramics and Application : 5th Serbian Ceramic Society Conference : program and the book of abstracts; September 21-23, 2016; Belgrade
Belgrade : Serbian Ceramic Society., 67-68.
https://hdl.handle.net/21.15107/rcub_vinar_10889

Rabasović M, Šević D, Križan J, Rabasović MD, Savić-Šević S, Mitrić M, Petrović M, Gilić M, Romčević NŽ. Annealed nanopowder GdVO4 :Sm3+ prepared by solution combustion synthesis. in Advanced Ceramics and Application : 5th Serbian Ceramic Society Conference : program and the book of abstracts; September 21-23, 2016; Belgrade. 2017;:67-68.
https://hdl.handle.net/21.15107/rcub_vinar_10889 .

Rabasović, Maja, Šević, Dragutin, Križan, Janez, Rabasović, M. D., Savić-Šević, S., Mitrić, Miodrag, Petrović, M., Gilić, M., Romčević, Nebojša Ž., "Annealed nanopowder GdVO4 :Sm3+ prepared by solution combustion synthesis" in Advanced Ceramics and Application : 5th Serbian Ceramic Society Conference : program and the book of abstracts; September 21-23, 2016; Belgrade (2017):67-68,
https://hdl.handle.net/21.15107/rcub_vinar_10889 .

TY  - JOUR
AU  - Lazarević, Zorica Ž.
AU  - Jovalekić, Čedomir
AU  - Gilic, Martina
AU  - Ivanovski, Valentin N.
AU  - Umićević, Ana
AU  - Sekulić, Dalibor L.
AU  - Romčević, Nebojša Ž.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1778
AB  - Yttrium orthoferrite (YFeO3) powder was prepared by a mechanochemical synthesis from a mixture of Y2O3 and alpha-Fe2O3 powders in a planetary ball mill for 2.5 h. The obtained YFeO3 powder sample was characterized by X-ray diffraction (XRD), Raman and infrared spectroscopy. The average crystallite size calculated by the Scherrer equation was 12 nm. The Mossbauer spectroscopy at room temperature confirms the superparamagnetic character of YFeO3 orthoferrite sample.
T2  - Science of Sintering
T1  - Yttrium Orthoferrite Powder Obtained by the Mechanochemical Synthesis
VL  - 49
IS  - 3
SP  - 277
EP  - 284
DO  - 10.2298/SOS1703277L
ER  - 

@article{
author = "Lazarević, Zorica Ž. and Jovalekić, Čedomir and Gilic, Martina and Ivanovski, Valentin N. and Umićević, Ana and Sekulić, Dalibor L. and Romčević, Nebojša Ž.",
year = "2017",
abstract = "Yttrium orthoferrite (YFeO3) powder was prepared by a mechanochemical synthesis from a mixture of Y2O3 and alpha-Fe2O3 powders in a planetary ball mill for 2.5 h. The obtained YFeO3 powder sample was characterized by X-ray diffraction (XRD), Raman and infrared spectroscopy. The average crystallite size calculated by the Scherrer equation was 12 nm. The Mossbauer spectroscopy at room temperature confirms the superparamagnetic character of YFeO3 orthoferrite sample.",
journal = "Science of Sintering",
title = "Yttrium Orthoferrite Powder Obtained by the Mechanochemical Synthesis",
volume = "49",
number = "3",
pages = "277-284",
doi = "10.2298/SOS1703277L"
}

Lazarević, Z. Ž., Jovalekić, Č., Gilic, M., Ivanovski, V. N., Umićević, A., Sekulić, D. L.,& Romčević, N. Ž.. (2017). Yttrium Orthoferrite Powder Obtained by the Mechanochemical Synthesis. in Science of Sintering, 49(3), 277-284.
https://doi.org/10.2298/SOS1703277L

Lazarević ZŽ, Jovalekić Č, Gilic M, Ivanovski VN, Umićević A, Sekulić DL, Romčević NŽ. Yttrium Orthoferrite Powder Obtained by the Mechanochemical Synthesis. in Science of Sintering. 2017;49(3):277-284.
doi:10.2298/SOS1703277L .

Lazarević, Zorica Ž., Jovalekić, Čedomir, Gilic, Martina, Ivanovski, Valentin N., Umićević, Ana, Sekulić, Dalibor L., Romčević, Nebojša Ž., "Yttrium Orthoferrite Powder Obtained by the Mechanochemical Synthesis" in Science of Sintering, 49, no. 3 (2017):277-284,
https://doi.org/10.2298/SOS1703277L . .

TY  - JOUR
AU  - Brajovic, Ljiljana M.
AU  - Stojanović, Dušica B.
AU  - Mihailovic, Pedja
AU  - Marković, Smilja
AU  - Romčević, Maja J.
AU  - Mitrić, Miodrag
AU  - Lazović, Vladimir M.
AU  - Dramlić, Dragan M.
AU  - Petričević, Slobodan
AU  - Romčević, Nebojša Ž.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1380
AB  - Bismuth germanium oxide Bi12GeO20 (BGO) has very interesting electrical, optical and magnetic properties. In order to make devices based on this material more flexible, its powder was used for preparing polymer composites. This study reports investigation of the effects of using different solvents and polymers in preparation of BGO composite on the microstructural and optical behaviour of the resulting material. Preparation of such composites by a solution casting method is described. Poly (methyl methacrylate) (PMMA) and polystyrene (PS)) were used as matrix materials and acetone and chloroform as solvents. Their microstructure and the quality of BGO dispersion and deaggregation in polymer matrix were analyzed by SEM, Raman, XRD and optical spectroscopy. The influence of particle size distribution, their shapes, and concentration on the optical transmission is calculated based on Mie scattering theory and discussed, too. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Journal of Alloys and Compounds
T1  - Preparation and characterization of bismuth germanium oxide (BGO) polymer composites
VL  - 695
SP  - 841
EP  - 849
DO  - 10.1016/j.jallcom.2016.10.140
ER  - 

@article{
author = "Brajovic, Ljiljana M. and Stojanović, Dušica B. and Mihailovic, Pedja and Marković, Smilja and Romčević, Maja J. and Mitrić, Miodrag and Lazović, Vladimir M. and Dramlić, Dragan M. and Petričević, Slobodan and Romčević, Nebojša Ž.",
year = "2017",
abstract = "Bismuth germanium oxide Bi12GeO20 (BGO) has very interesting electrical, optical and magnetic properties. In order to make devices based on this material more flexible, its powder was used for preparing polymer composites. This study reports investigation of the effects of using different solvents and polymers in preparation of BGO composite on the microstructural and optical behaviour of the resulting material. Preparation of such composites by a solution casting method is described. Poly (methyl methacrylate) (PMMA) and polystyrene (PS)) were used as matrix materials and acetone and chloroform as solvents. Their microstructure and the quality of BGO dispersion and deaggregation in polymer matrix were analyzed by SEM, Raman, XRD and optical spectroscopy. The influence of particle size distribution, their shapes, and concentration on the optical transmission is calculated based on Mie scattering theory and discussed, too. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Journal of Alloys and Compounds",
title = "Preparation and characterization of bismuth germanium oxide (BGO) polymer composites",
volume = "695",
pages = "841-849",
doi = "10.1016/j.jallcom.2016.10.140"
}

Brajovic, L. M., Stojanović, D. B., Mihailovic, P., Marković, S., Romčević, M. J., Mitrić, M., Lazović, V. M., Dramlić, D. M., Petričević, S.,& Romčević, N. Ž.. (2017). Preparation and characterization of bismuth germanium oxide (BGO) polymer composites. in Journal of Alloys and Compounds, 695, 841-849.
https://doi.org/10.1016/j.jallcom.2016.10.140

Brajovic LM, Stojanović DB, Mihailovic P, Marković S, Romčević MJ, Mitrić M, Lazović VM, Dramlić DM, Petričević S, Romčević NŽ. Preparation and characterization of bismuth germanium oxide (BGO) polymer composites. in Journal of Alloys and Compounds. 2017;695:841-849.
doi:10.1016/j.jallcom.2016.10.140 .

Brajovic, Ljiljana M., Stojanović, Dušica B., Mihailovic, Pedja, Marković, Smilja, Romčević, Maja J., Mitrić, Miodrag, Lazović, Vladimir M., Dramlić, Dragan M., Petričević, Slobodan, Romčević, Nebojša Ž., "Preparation and characterization of bismuth germanium oxide (BGO) polymer composites" in Journal of Alloys and Compounds, 695 (2017):841-849,
https://doi.org/10.1016/j.jallcom.2016.10.140 . .

TY  - JOUR
AU  - Šević, Dragutin M.
AU  - Rabasović, Maja S.
AU  - Križan, Janez
AU  - Savić-Šević, Svetlana N.
AU  - Mitrić, Miodrag
AU  - Gilić, Martina D.
AU  - Hadžić, Branka B.
AU  - Romčević, Nebojša Ž.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1421
AB  - In this paper we describe the synthesis and characterization of the YVO4:Eu3+ nanopowder. The material was prepared using simple solution combustion synthesis. X-ray powder diffraction (XRD), scanning electron microscope (SEM), Raman and photoluminescence (PL) techniques were used to confirm and characterize the prepared material. The time resolved analysis of emission spectra was achieved by using the streak camera system. Beside luminescence lifetime of slow decayed transitions we also measured their rise time and lifetime of fast decayed transitions. We also determitied the excitation spectra of this nano material. Results of our analysis prove that YVO4:Eu3(+) nanopowder is appropriate material for various optoelectronic devices. (C) 2016 Elsevier Ltd. All rights reserved.
T2  - Materials Research Bulletin
T1  - Characterization and luminescence kinetics of Eu3+ doped YVO4 nanopowders
VL  - 88
SP  - 121
EP  - 126
DO  - 10.1016/j.materresbull.2016.12.021
ER  - 

@article{
author = "Šević, Dragutin M. and Rabasović, Maja S. and Križan, Janez and Savić-Šević, Svetlana N. and Mitrić, Miodrag and Gilić, Martina D. and Hadžić, Branka B. and Romčević, Nebojša Ž.",
year = "2017",
abstract = "In this paper we describe the synthesis and characterization of the YVO4:Eu3+ nanopowder. The material was prepared using simple solution combustion synthesis. X-ray powder diffraction (XRD), scanning electron microscope (SEM), Raman and photoluminescence (PL) techniques were used to confirm and characterize the prepared material. The time resolved analysis of emission spectra was achieved by using the streak camera system. Beside luminescence lifetime of slow decayed transitions we also measured their rise time and lifetime of fast decayed transitions. We also determitied the excitation spectra of this nano material. Results of our analysis prove that YVO4:Eu3(+) nanopowder is appropriate material for various optoelectronic devices. (C) 2016 Elsevier Ltd. All rights reserved.",
journal = "Materials Research Bulletin",
title = "Characterization and luminescence kinetics of Eu3+ doped YVO4 nanopowders",
volume = "88",
pages = "121-126",
doi = "10.1016/j.materresbull.2016.12.021"
}

Šević, D. M., Rabasović, M. S., Križan, J., Savić-Šević, S. N., Mitrić, M., Gilić, M. D., Hadžić, B. B.,& Romčević, N. Ž.. (2017). Characterization and luminescence kinetics of Eu3+ doped YVO4 nanopowders. in Materials Research Bulletin, 88, 121-126.
https://doi.org/10.1016/j.materresbull.2016.12.021

Šević DM, Rabasović MS, Križan J, Savić-Šević SN, Mitrić M, Gilić MD, Hadžić BB, Romčević NŽ. Characterization and luminescence kinetics of Eu3+ doped YVO4 nanopowders. in Materials Research Bulletin. 2017;88:121-126.
doi:10.1016/j.materresbull.2016.12.021 .

Šević, Dragutin M., Rabasović, Maja S., Križan, Janez, Savić-Šević, Svetlana N., Mitrić, Miodrag, Gilić, Martina D., Hadžić, Branka B., Romčević, Nebojša Ž., "Characterization and luminescence kinetics of Eu3+ doped YVO4 nanopowders" in Materials Research Bulletin, 88 (2017):121-126,
https://doi.org/10.1016/j.materresbull.2016.12.021 . .

TY  - JOUR
AU  - Bundaleski, Nenad
AU  - Radisavljević, Ivana
AU  - Trigueiro, Joao
AU  - Tolstogouzov, Alexander
AU  - Rakočević, Zlatko Lj.
AU  - Medić, Mirjana
AU  - Teodoro, Orlando M. N. D.
AU  - Romčević, Nebojša Ž.
AU  - Ivanović, Nenad
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1422
AB  - Using X-ray induced Photoelectron Spectroscopy, Time of Flight Secondary Ion Mass Spectrometry and Atomic Force Microscopy we have investigated elemental composition, structure and oxidation process taking place at the surfaces of polycrystalline Cd0.99Fe0.01Te0.97Se0.03 and Cd0.95Mn0.05Te0.97Se0.03 systems stored in ambient conditions. The surface oxidation destroys the native CdTe matrix and provokes substantial atomic rearrangement in the first few atomic layers. The near surface region of both systems is enriched in Cd and to some extent Te-deficient, but the surface structure, morphology and the native oxide composition are all found to be considerably different. In Cd0.99Fe0.01Te0.97Se0.03 system both Fe and Se dopants diffuse into the bulk and oxidation of its surface results in formation of a thin CdTeO3 layer which covers the CdTe matrix. In Cd0.95Mn0.05Te0.97Se0.03 system oxygen-rich atmosphere triggers Mn and Se out diffusion and the nonuniform oxide layer predominantly consists of MnO and a small amount of Te-oxide which both lay underneath a thin layer of metallic Cd segregated at the top of the surface. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Materials Chemistry and Physics
T1  - Surface composition of Cd1-xFe(Mn)(x)Te1-ySey systems exposed to air
VL  - 189
SP  - 35
EP  - 43
DO  - 10.1016/j.matchemphys.2016.12.029
ER  - 

@article{
author = "Bundaleski, Nenad and Radisavljević, Ivana and Trigueiro, Joao and Tolstogouzov, Alexander and Rakočević, Zlatko Lj. and Medić, Mirjana and Teodoro, Orlando M. N. D. and Romčević, Nebojša Ž. and Ivanović, Nenad",
year = "2017",
abstract = "Using X-ray induced Photoelectron Spectroscopy, Time of Flight Secondary Ion Mass Spectrometry and Atomic Force Microscopy we have investigated elemental composition, structure and oxidation process taking place at the surfaces of polycrystalline Cd0.99Fe0.01Te0.97Se0.03 and Cd0.95Mn0.05Te0.97Se0.03 systems stored in ambient conditions. The surface oxidation destroys the native CdTe matrix and provokes substantial atomic rearrangement in the first few atomic layers. The near surface region of both systems is enriched in Cd and to some extent Te-deficient, but the surface structure, morphology and the native oxide composition are all found to be considerably different. In Cd0.99Fe0.01Te0.97Se0.03 system both Fe and Se dopants diffuse into the bulk and oxidation of its surface results in formation of a thin CdTeO3 layer which covers the CdTe matrix. In Cd0.95Mn0.05Te0.97Se0.03 system oxygen-rich atmosphere triggers Mn and Se out diffusion and the nonuniform oxide layer predominantly consists of MnO and a small amount of Te-oxide which both lay underneath a thin layer of metallic Cd segregated at the top of the surface. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Materials Chemistry and Physics",
title = "Surface composition of Cd1-xFe(Mn)(x)Te1-ySey systems exposed to air",
volume = "189",
pages = "35-43",
doi = "10.1016/j.matchemphys.2016.12.029"
}

Bundaleski, N., Radisavljević, I., Trigueiro, J., Tolstogouzov, A., Rakočević, Z. Lj., Medić, M., Teodoro, O. M. N. D., Romčević, N. Ž.,& Ivanović, N.. (2017). Surface composition of Cd1-xFe(Mn)(x)Te1-ySey systems exposed to air. in Materials Chemistry and Physics, 189, 35-43.
https://doi.org/10.1016/j.matchemphys.2016.12.029

Bundaleski N, Radisavljević I, Trigueiro J, Tolstogouzov A, Rakočević ZL, Medić M, Teodoro OMND, Romčević NŽ, Ivanović N. Surface composition of Cd1-xFe(Mn)(x)Te1-ySey systems exposed to air. in Materials Chemistry and Physics. 2017;189:35-43.
doi:10.1016/j.matchemphys.2016.12.029 .

Bundaleski, Nenad, Radisavljević, Ivana, Trigueiro, Joao, Tolstogouzov, Alexander, Rakočević, Zlatko Lj., Medić, Mirjana, Teodoro, Orlando M. N. D., Romčević, Nebojša Ž., Ivanović, Nenad, "Surface composition of Cd1-xFe(Mn)(x)Te1-ySey systems exposed to air" in Materials Chemistry and Physics, 189 (2017):35-43,
https://doi.org/10.1016/j.matchemphys.2016.12.029 . .

TY  - JOUR
AU  - Kovačević, Aleksander
AU  - Ristić-Đurović, Jasna L.
AU  - Lekic, Marina
AU  - Hadžić, Branka B.
AU  - Abudagel, Giuma Saleh Isa
AU  - Petričević, Slobodan
AU  - Mihailovic, Pedja
AU  - Matović, Branko
AU  - Dramlić, Dragan M.
AU  - Brajovic, Ljiljana M.
AU  - Romčević, Nebojša Ž.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1235
AB  - High quality bismuth germanium oxide single crystals were irradiated by a femtosecond pulsed laser beam of increasing power. Analyses performed on irradiated and unirradiated samples showed significant changes in transmittance, transmission spectra, sample color, Raman spectra, X-ray diffraction (XRD) pattern, Verdet constant, magneto-optical property, and absorption coefficient. After irradiation, the transmission spectra values increased whereas anisotropy detected in the transmission spectra of unirradiated samples disappeared. The change of color caused by irradiation was noticeable to the naked eye. The XRD measurements confirmed structural changes induced by laser irradiation, i.e., the laser-beam-incident side of the sample became almost amorphous, whereas the side opposite to the incident can be indexed to the Bi12GeO20 compound. Irradiation caused increase of Raman spectra peaks with the exception of crystal peaks of type E, which disappeared. The femtosecond pulsed laser irradiation can be used to improve bismuth germanium oxide single crystal optical properties. (C) 2016 Elsevier Ltd. All rights reserved.
T2  - Materials Research Bulletin
T1  - Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties
VL  - 83
SP  - 284
EP  - 289
DO  - 10.1016/j.materresbull.2016.06.023
ER  - 

@article{
author = "Kovačević, Aleksander and Ristić-Đurović, Jasna L. and Lekic, Marina and Hadžić, Branka B. and Abudagel, Giuma Saleh Isa and Petričević, Slobodan and Mihailovic, Pedja and Matović, Branko and Dramlić, Dragan M. and Brajovic, Ljiljana M. and Romčević, Nebojša Ž.",
year = "2016",
abstract = "High quality bismuth germanium oxide single crystals were irradiated by a femtosecond pulsed laser beam of increasing power. Analyses performed on irradiated and unirradiated samples showed significant changes in transmittance, transmission spectra, sample color, Raman spectra, X-ray diffraction (XRD) pattern, Verdet constant, magneto-optical property, and absorption coefficient. After irradiation, the transmission spectra values increased whereas anisotropy detected in the transmission spectra of unirradiated samples disappeared. The change of color caused by irradiation was noticeable to the naked eye. The XRD measurements confirmed structural changes induced by laser irradiation, i.e., the laser-beam-incident side of the sample became almost amorphous, whereas the side opposite to the incident can be indexed to the Bi12GeO20 compound. Irradiation caused increase of Raman spectra peaks with the exception of crystal peaks of type E, which disappeared. The femtosecond pulsed laser irradiation can be used to improve bismuth germanium oxide single crystal optical properties. (C) 2016 Elsevier Ltd. All rights reserved.",
journal = "Materials Research Bulletin",
title = "Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties",
volume = "83",
pages = "284-289",
doi = "10.1016/j.materresbull.2016.06.023"
}

Kovačević, A., Ristić-Đurović, J. L., Lekic, M., Hadžić, B. B., Abudagel, G. S. I., Petričević, S., Mihailovic, P., Matović, B., Dramlić, D. M., Brajovic, L. M.,& Romčević, N. Ž.. (2016). Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties. in Materials Research Bulletin, 83, 284-289.
https://doi.org/10.1016/j.materresbull.2016.06.023

Kovačević A, Ristić-Đurović JL, Lekic M, Hadžić BB, Abudagel GSI, Petričević S, Mihailovic P, Matović B, Dramlić DM, Brajovic LM, Romčević NŽ. Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties. in Materials Research Bulletin. 2016;83:284-289.
doi:10.1016/j.materresbull.2016.06.023 .

Kovačević, Aleksander, Ristić-Đurović, Jasna L., Lekic, Marina, Hadžić, Branka B., Abudagel, Giuma Saleh Isa, Petričević, Slobodan, Mihailovic, Pedja, Matović, Branko, Dramlić, Dragan M., Brajovic, Ljiljana M., Romčević, Nebojša Ž., "Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties" in Materials Research Bulletin, 83 (2016):284-289,
https://doi.org/10.1016/j.materresbull.2016.06.023 . .

TY  - JOUR
AU  - Gilić, Martina D.
AU  - Petrović, Milica S.
AU  - Kostić, Radmila
AU  - Stojanović, Dušanka
AU  - Barudžija, Tanja
AU  - Mitrić, Miodrag
AU  - Romčević, Nebojša Ž.
AU  - Ralević, Uroš
AU  - Trajić, Jelena
AU  - Romčević, Maja J.
AU  - Yahia, Ibrahim S.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1116
AB  - This paper describes the structural and optical properties of Cu-Se thin films. The surface morphology of thin films was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Formation of Cu-Se thin films is concluded to proceed unevenly, in the form of islands which later grew into agglomerates. The structural characterization of Cu-Se thin film was investigated using X-ray diffraction pattern (XRD). The presence of two-phase system is observed. One is the solid solution of Cu in Se and the other is low-pressure modification of CuSe2. The Raman spectroscopy was used to identify and quantify the individual phases present in the Cu-Se films. Red shift and asymmetry of Raman mode characteristic for CuSe2 enable us to estimate nanocrystal dimension. In the analysis of the far infrared reflection spectra, numerical model for calculating the reflectivity coefficient of layered system, which includes film with nanocrystalite inclusions (modeled by Maxwell -Garnett approximation) and substrate, has been applied. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Infrared Physics and Technology
T1  - Structural and optical properties of CuSe2 nanocrystals formed in thin solid Cu-Se film
VL  - 76
SP  - 276
EP  - 284
DO  - 10.1016/j.infrared.2016.03.008
ER  - 

@article{
author = "Gilić, Martina D. and Petrović, Milica S. and Kostić, Radmila and Stojanović, Dušanka and Barudžija, Tanja and Mitrić, Miodrag and Romčević, Nebojša Ž. and Ralević, Uroš and Trajić, Jelena and Romčević, Maja J. and Yahia, Ibrahim S.",
year = "2016",
abstract = "This paper describes the structural and optical properties of Cu-Se thin films. The surface morphology of thin films was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Formation of Cu-Se thin films is concluded to proceed unevenly, in the form of islands which later grew into agglomerates. The structural characterization of Cu-Se thin film was investigated using X-ray diffraction pattern (XRD). The presence of two-phase system is observed. One is the solid solution of Cu in Se and the other is low-pressure modification of CuSe2. The Raman spectroscopy was used to identify and quantify the individual phases present in the Cu-Se films. Red shift and asymmetry of Raman mode characteristic for CuSe2 enable us to estimate nanocrystal dimension. In the analysis of the far infrared reflection spectra, numerical model for calculating the reflectivity coefficient of layered system, which includes film with nanocrystalite inclusions (modeled by Maxwell -Garnett approximation) and substrate, has been applied. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Infrared Physics and Technology",
title = "Structural and optical properties of CuSe2 nanocrystals formed in thin solid Cu-Se film",
volume = "76",
pages = "276-284",
doi = "10.1016/j.infrared.2016.03.008"
}

Gilić, M. D., Petrović, M. S., Kostić, R., Stojanović, D., Barudžija, T., Mitrić, M., Romčević, N. Ž., Ralević, U., Trajić, J., Romčević, M. J.,& Yahia, I. S.. (2016). Structural and optical properties of CuSe2 nanocrystals formed in thin solid Cu-Se film. in Infrared Physics and Technology, 76, 276-284.
https://doi.org/10.1016/j.infrared.2016.03.008

Gilić MD, Petrović MS, Kostić R, Stojanović D, Barudžija T, Mitrić M, Romčević NŽ, Ralević U, Trajić J, Romčević MJ, Yahia IS. Structural and optical properties of CuSe2 nanocrystals formed in thin solid Cu-Se film. in Infrared Physics and Technology. 2016;76:276-284.
doi:10.1016/j.infrared.2016.03.008 .

Gilić, Martina D., Petrović, Milica S., Kostić, Radmila, Stojanović, Dušanka, Barudžija, Tanja, Mitrić, Miodrag, Romčević, Nebojša Ž., Ralević, Uroš, Trajić, Jelena, Romčević, Maja J., Yahia, Ibrahim S., "Structural and optical properties of CuSe2 nanocrystals formed in thin solid Cu-Se film" in Infrared Physics and Technology, 76 (2016):276-284,
https://doi.org/10.1016/j.infrared.2016.03.008 . .

TY  - JOUR
AU  - Trajić, Jelena
AU  - Romčević, Maja J.
AU  - Romčević, Nebojša Ž.
AU  - Babić, Biljana M.
AU  - Matović, Branko
AU  - Balaž, Peter
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1135
AB  - ZnS nanoparticles were synthesized mechanochemically by high-energy milling, with three different milling times (5 min, 10 min and 20 min). Nitrogen adsorption method was used for examining specific surface area and texture of obtained powders. It was found that all samples are completely mesoporous. The optical properties were studied by far-infrared spectroscopy at room temperature in spectral region of 50-600 cm(-1). The analysis of the far-infrared reflectivity spectra was made by the fitting procedure. The dielectric function of ZnS nanoparticles is modeled as a mixture of homogenous spherical inclusions in air by the Maxwell-Garnet formula. In the analysis of the far-infrared reflection spectra, appearance of combined plasmon-LO phonon modes (CPPMs) with high phonon damping are observed, which causes decrease of coupled plasmon-phonon frequencies. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Optical Materials
T1  - Far-infrared spectra of mesoporous ZnS nanoparticles
VL  - 57
SP  - 225
EP  - 230
DO  - 10.1016/j.optmat.2016.05.004
ER  - 

@article{
author = "Trajić, Jelena and Romčević, Maja J. and Romčević, Nebojša Ž. and Babić, Biljana M. and Matović, Branko and Balaž, Peter",
year = "2016",
abstract = "ZnS nanoparticles were synthesized mechanochemically by high-energy milling, with three different milling times (5 min, 10 min and 20 min). Nitrogen adsorption method was used for examining specific surface area and texture of obtained powders. It was found that all samples are completely mesoporous. The optical properties were studied by far-infrared spectroscopy at room temperature in spectral region of 50-600 cm(-1). The analysis of the far-infrared reflectivity spectra was made by the fitting procedure. The dielectric function of ZnS nanoparticles is modeled as a mixture of homogenous spherical inclusions in air by the Maxwell-Garnet formula. In the analysis of the far-infrared reflection spectra, appearance of combined plasmon-LO phonon modes (CPPMs) with high phonon damping are observed, which causes decrease of coupled plasmon-phonon frequencies. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Optical Materials",
title = "Far-infrared spectra of mesoporous ZnS nanoparticles",
volume = "57",
pages = "225-230",
doi = "10.1016/j.optmat.2016.05.004"
}

Trajić, J., Romčević, M. J., Romčević, N. Ž., Babić, B. M., Matović, B.,& Balaž, P.. (2016). Far-infrared spectra of mesoporous ZnS nanoparticles. in Optical Materials, 57, 225-230.
https://doi.org/10.1016/j.optmat.2016.05.004

Trajić J, Romčević MJ, Romčević NŽ, Babić BM, Matović B, Balaž P. Far-infrared spectra of mesoporous ZnS nanoparticles. in Optical Materials. 2016;57:225-230.
doi:10.1016/j.optmat.2016.05.004 .

Trajić, Jelena, Romčević, Maja J., Romčević, Nebojša Ž., Babić, Biljana M., Matović, Branko, Balaž, Peter, "Far-infrared spectra of mesoporous ZnS nanoparticles" in Optical Materials, 57 (2016):225-230,
https://doi.org/10.1016/j.optmat.2016.05.004 . .

TY  - JOUR
AU  - Trajić, Jelena
AU  - Rabasović, Maja S.
AU  - Savić-Šević, Svetlana N.
AU  - Šević, Dragutin M.
AU  - Babić, Biljana M.
AU  - Romčević, Maja J.
AU  - Ristić-Đurović, Jasna L.
AU  - Paunović, Novica M.
AU  - Križan, Janez
AU  - Romčević, Nebojša Ž.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1210
AB  - The solution combustion synthesis was used to prepare nanopowders of yttrium aluminum garnet (YAG) and YAG doped with dysprosium ions, Dy3+, (YAG:Dy). The morphology, specific surface area, texture, and optical properties of the prepared materials were studied by the means of scanning electron microscopy (SEM), nitrogen adsorption method, and far-infrared spectroscopy at room temperature in the spectral region between 80 and 600 cm(-1). It was established that all the examined samples were microporous. The Maxwell-Garnet formula was used to model dielectric function of YAG and YAG:Dy nanopowders as mixtures of homogenous spherical inclusions in air. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Infrared Physics and Technology
T1  - Far-infrared spectra of dysprosium doped yttrium aluminum garnet nanopowder
VL  - 77
SP  - 226
EP  - 229
DO  - 10.1016/j.infrared.2016.06.003
ER  - 

@article{
author = "Trajić, Jelena and Rabasović, Maja S. and Savić-Šević, Svetlana N. and Šević, Dragutin M. and Babić, Biljana M. and Romčević, Maja J. and Ristić-Đurović, Jasna L. and Paunović, Novica M. and Križan, Janez and Romčević, Nebojša Ž.",
year = "2016",
abstract = "The solution combustion synthesis was used to prepare nanopowders of yttrium aluminum garnet (YAG) and YAG doped with dysprosium ions, Dy3+, (YAG:Dy). The morphology, specific surface area, texture, and optical properties of the prepared materials were studied by the means of scanning electron microscopy (SEM), nitrogen adsorption method, and far-infrared spectroscopy at room temperature in the spectral region between 80 and 600 cm(-1). It was established that all the examined samples were microporous. The Maxwell-Garnet formula was used to model dielectric function of YAG and YAG:Dy nanopowders as mixtures of homogenous spherical inclusions in air. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Infrared Physics and Technology",
title = "Far-infrared spectra of dysprosium doped yttrium aluminum garnet nanopowder",
volume = "77",
pages = "226-229",
doi = "10.1016/j.infrared.2016.06.003"
}

Trajić, J., Rabasović, M. S., Savić-Šević, S. N., Šević, D. M., Babić, B. M., Romčević, M. J., Ristić-Đurović, J. L., Paunović, N. M., Križan, J.,& Romčević, N. Ž.. (2016). Far-infrared spectra of dysprosium doped yttrium aluminum garnet nanopowder. in Infrared Physics and Technology, 77, 226-229.
https://doi.org/10.1016/j.infrared.2016.06.003

Trajić J, Rabasović MS, Savić-Šević SN, Šević DM, Babić BM, Romčević MJ, Ristić-Đurović JL, Paunović NM, Križan J, Romčević NŽ. Far-infrared spectra of dysprosium doped yttrium aluminum garnet nanopowder. in Infrared Physics and Technology. 2016;77:226-229.
doi:10.1016/j.infrared.2016.06.003 .

Trajić, Jelena, Rabasović, Maja S., Savić-Šević, Svetlana N., Šević, Dragutin M., Babić, Biljana M., Romčević, Maja J., Ristić-Đurović, Jasna L., Paunović, Novica M., Križan, Janez, Romčević, Nebojša Ž., "Far-infrared spectra of dysprosium doped yttrium aluminum garnet nanopowder" in Infrared Physics and Technology, 77 (2016):226-229,
https://doi.org/10.1016/j.infrared.2016.06.003 . .

TY  - JOUR
AU  - Trajić, Jelena
AU  - Kostić, Radmila
AU  - Romčević, Nebojša Ž.
AU  - Romčević, Maja J.
AU  - Mitrić, Miodrag
AU  - Lazović, Vladimir M.
AU  - Balaž, Peter
AU  - Stojanović, Dušanka
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/509
AB  - ZnS nanoparticles were synthesized mechanochemically by high-energy milling. In order to investigate influence off milling time to sample properties, samples were produced in three different milling times (5 min, 10 min and 20 min). The morphology of samples has been investigated by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). X-ray diffraction (XRD) investigation of synthesized nanocrystals identified cubic structure. From XRD, ZnS size of crystallites was estimated as 1.9 nm (after 5 min milling time), 2.3 nm (10 min) and 2.4 nm (20 min), implying that we are in strong confinement regime. The optical properties were studied by Raman spectroscopy, in spectral region 100-500 cm(-1), excitation source was 514.5 nm (E-L = 2.41 eV), which means that we are in off resonant regime. Dominant spectral structures, of comparable intensity, are registered in spectral region 130-180 cm(-1), around 265 cm(-1) and around 345 cm(-1). First two are assigned as second-order ZnS modes. A theoretical model of continuum medium was used to calculate frequencies of the confined optical phonons in ZnS. Satisfactory agreement with experimental results was found and mode at 345 cm(-)1 is assigned as LO type phonon confined in ZnS nanocrystal. (C) 2015 Elsevier B.V. All rights reserved.
T2  - Journal of Alloys and Compounds
T1  - Raman spectroscopy of ZnS quantum dots
VL  - 637
SP  - 401
EP  - 406
DO  - 10.1016/j.jallcom.2015.03.027
ER  - 

@article{
author = "Trajić, Jelena and Kostić, Radmila and Romčević, Nebojša Ž. and Romčević, Maja J. and Mitrić, Miodrag and Lazović, Vladimir M. and Balaž, Peter and Stojanović, Dušanka",
year = "2015",
abstract = "ZnS nanoparticles were synthesized mechanochemically by high-energy milling. In order to investigate influence off milling time to sample properties, samples were produced in three different milling times (5 min, 10 min and 20 min). The morphology of samples has been investigated by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). X-ray diffraction (XRD) investigation of synthesized nanocrystals identified cubic structure. From XRD, ZnS size of crystallites was estimated as 1.9 nm (after 5 min milling time), 2.3 nm (10 min) and 2.4 nm (20 min), implying that we are in strong confinement regime. The optical properties were studied by Raman spectroscopy, in spectral region 100-500 cm(-1), excitation source was 514.5 nm (E-L = 2.41 eV), which means that we are in off resonant regime. Dominant spectral structures, of comparable intensity, are registered in spectral region 130-180 cm(-1), around 265 cm(-1) and around 345 cm(-1). First two are assigned as second-order ZnS modes. A theoretical model of continuum medium was used to calculate frequencies of the confined optical phonons in ZnS. Satisfactory agreement with experimental results was found and mode at 345 cm(-)1 is assigned as LO type phonon confined in ZnS nanocrystal. (C) 2015 Elsevier B.V. All rights reserved.",
journal = "Journal of Alloys and Compounds",
title = "Raman spectroscopy of ZnS quantum dots",
volume = "637",
pages = "401-406",
doi = "10.1016/j.jallcom.2015.03.027"
}

Trajić, J., Kostić, R., Romčević, N. Ž., Romčević, M. J., Mitrić, M., Lazović, V. M., Balaž, P.,& Stojanović, D.. (2015). Raman spectroscopy of ZnS quantum dots. in Journal of Alloys and Compounds, 637, 401-406.
https://doi.org/10.1016/j.jallcom.2015.03.027

Trajić J, Kostić R, Romčević NŽ, Romčević MJ, Mitrić M, Lazović VM, Balaž P, Stojanović D. Raman spectroscopy of ZnS quantum dots. in Journal of Alloys and Compounds. 2015;637:401-406.
doi:10.1016/j.jallcom.2015.03.027 .

Trajić, Jelena, Kostić, Radmila, Romčević, Nebojša Ž., Romčević, Maja J., Mitrić, Miodrag, Lazović, Vladimir M., Balaž, Peter, Stojanović, Dušanka, "Raman spectroscopy of ZnS quantum dots" in Journal of Alloys and Compounds, 637 (2015):401-406,
https://doi.org/10.1016/j.jallcom.2015.03.027 . .

TY  - JOUR
AU  - Rabasović, Maja S.
AU  - Šević, Dragutin M.
AU  - Križan, Janez
AU  - Rabasović, Mihailo D.
AU  - Savić-Šević, Svetlana N.
AU  - Mitrić, Miodrag
AU  - Petrović, Milica S.
AU  - Gilić, Martina D.
AU  - Romčević, Nebojša Ž.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/852
AB  - Dysprosium (Dy3+ ions) doped YAG nanopowders were prepared by the solution combustion synthesis (SCS) method and undoped yttrium aluminum garnet (YAG, Y3Al5O12) single crystal was grown by the Czochralski technique. The structure of the prepared materials has been confirmed and characterized using X-ray powder diffraction (XRD), scanning electron microscope (SEM), Raman and photoluminescence (PL) spectroscopy. PL spectra were acquired using Optical Parametric Oscillator (OPO) excitation tuned at 350 nm. Several emission bands in Dy3+ emission spectrum were observed in the blue (470-500 nm), yellow (560-600 nm), red (660-685 nm) and infra-red (750-780 nm) regions, corresponding to F-4(9/2)-H-6(15/2), F-4(9/2)-H-6(13/2), F-4(9/2)-H-6(11/2), F-4(9/2)-(H-6(9/2) + H-6(11/2)) transitions in the 4f levels of Dy3+ ions, respectively. By using the Commission Internationale de lEclairage (CIE) chromaticity diagram of emission spectra it has been shown that this material can be used as a source of a white light. The result of lifetime analysis of the F-4(9/2) level in dysprosium ion has been reported, as well. (C) 2015 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Optical Materials
T1  - Structural properties and luminescence kinetics of white nanophosphor YAG:Dy
VL  - 50
SP  - 250
EP  - 255
DO  - 10.1016/j.optmat.2015.11.002
ER  - 

@article{
author = "Rabasović, Maja S. and Šević, Dragutin M. and Križan, Janez and Rabasović, Mihailo D. and Savić-Šević, Svetlana N. and Mitrić, Miodrag and Petrović, Milica S. and Gilić, Martina D. and Romčević, Nebojša Ž.",
year = "2015",
abstract = "Dysprosium (Dy3+ ions) doped YAG nanopowders were prepared by the solution combustion synthesis (SCS) method and undoped yttrium aluminum garnet (YAG, Y3Al5O12) single crystal was grown by the Czochralski technique. The structure of the prepared materials has been confirmed and characterized using X-ray powder diffraction (XRD), scanning electron microscope (SEM), Raman and photoluminescence (PL) spectroscopy. PL spectra were acquired using Optical Parametric Oscillator (OPO) excitation tuned at 350 nm. Several emission bands in Dy3+ emission spectrum were observed in the blue (470-500 nm), yellow (560-600 nm), red (660-685 nm) and infra-red (750-780 nm) regions, corresponding to F-4(9/2)-H-6(15/2), F-4(9/2)-H-6(13/2), F-4(9/2)-H-6(11/2), F-4(9/2)-(H-6(9/2) + H-6(11/2)) transitions in the 4f levels of Dy3+ ions, respectively. By using the Commission Internationale de lEclairage (CIE) chromaticity diagram of emission spectra it has been shown that this material can be used as a source of a white light. The result of lifetime analysis of the F-4(9/2) level in dysprosium ion has been reported, as well. (C) 2015 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Optical Materials",
title = "Structural properties and luminescence kinetics of white nanophosphor YAG:Dy",
volume = "50",
pages = "250-255",
doi = "10.1016/j.optmat.2015.11.002"
}

Rabasović, M. S., Šević, D. M., Križan, J., Rabasović, M. D., Savić-Šević, S. N., Mitrić, M., Petrović, M. S., Gilić, M. D.,& Romčević, N. Ž.. (2015). Structural properties and luminescence kinetics of white nanophosphor YAG:Dy. in Optical Materials
Elsevier., 50, 250-255.
https://doi.org/10.1016/j.optmat.2015.11.002

Rabasović MS, Šević DM, Križan J, Rabasović MD, Savić-Šević SN, Mitrić M, Petrović MS, Gilić MD, Romčević NŽ. Structural properties and luminescence kinetics of white nanophosphor YAG:Dy. in Optical Materials. 2015;50:250-255.
doi:10.1016/j.optmat.2015.11.002 .

Rabasović, Maja S., Šević, Dragutin M., Križan, Janez, Rabasović, Mihailo D., Savić-Šević, Svetlana N., Mitrić, Miodrag, Petrović, Milica S., Gilić, Martina D., Romčević, Nebojša Ž., "Structural properties and luminescence kinetics of white nanophosphor YAG:Dy" in Optical Materials, 50 (2015):250-255,
https://doi.org/10.1016/j.optmat.2015.11.002 . .

TY  - JOUR
AU  - Radisavljević, Ivana
AU  - Novaković, Nikola
AU  - Romčević, Nebojša Ž.
AU  - Mitrić, Miodrag
AU  - Kuzmanović, Bojana
AU  - Bojanić, Slobodan
AU  - Ivanović, Nenad
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/840
AB  - Local electronic and structural features around Mn in Cd1-xMnxTe0.97Se0.03 (x = 0.02; 0.05; 0.1; y = 0.03) were studied by means of X-ray Absorption Fine Structure (XAFS) techniques. Manganese ions with an average valence 2+, are found to be well incorporated into the host CdTe lattice, with clear preference for Te atoms as the first neighbors. However, Mn and Te are found to form two essentially different types of bonds, one short, strong and directional (cubic MnTe-alike bond), and three much longer, predominantly ionic in nature (hexagonal MnTe-alike bonds), thereby distorting the tetrahedral coordination around Mn. The origin of peculiar Mn Te bonds distribution and details of their nature and strength are further elaborated by employing the first principle electronic structure calculations. That way a thorough insight in impact of the Mn Te bond length variation on the electronic structure of the compound is obtained. The relations established between the local structures and electronic properties offer a reliable procedure for detailed analysis of the structural and electronic consequences of the 3d-transition metals (TM) incorporation in II-VI semiconductor host. Clear distinction between various influences makes the procedure easily adoptable also to the studies of TM impurities in other semiconductors. (C) 2015 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Electronic aspects of formation and properties of local structures around Mn in Cd1-xMnxTe1-ySey
VL  - 167
SP  - 236
EP  - 245
DO  - 10.1016/j.matchemphys.2015.10.038
ER  - 

@article{
author = "Radisavljević, Ivana and Novaković, Nikola and Romčević, Nebojša Ž. and Mitrić, Miodrag and Kuzmanović, Bojana and Bojanić, Slobodan and Ivanović, Nenad",
year = "2015",
abstract = "Local electronic and structural features around Mn in Cd1-xMnxTe0.97Se0.03 (x = 0.02; 0.05; 0.1; y = 0.03) were studied by means of X-ray Absorption Fine Structure (XAFS) techniques. Manganese ions with an average valence 2+, are found to be well incorporated into the host CdTe lattice, with clear preference for Te atoms as the first neighbors. However, Mn and Te are found to form two essentially different types of bonds, one short, strong and directional (cubic MnTe-alike bond), and three much longer, predominantly ionic in nature (hexagonal MnTe-alike bonds), thereby distorting the tetrahedral coordination around Mn. The origin of peculiar Mn Te bonds distribution and details of their nature and strength are further elaborated by employing the first principle electronic structure calculations. That way a thorough insight in impact of the Mn Te bond length variation on the electronic structure of the compound is obtained. The relations established between the local structures and electronic properties offer a reliable procedure for detailed analysis of the structural and electronic consequences of the 3d-transition metals (TM) incorporation in II-VI semiconductor host. Clear distinction between various influences makes the procedure easily adoptable also to the studies of TM impurities in other semiconductors. (C) 2015 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Electronic aspects of formation and properties of local structures around Mn in Cd1-xMnxTe1-ySey",
volume = "167",
pages = "236-245",
doi = "10.1016/j.matchemphys.2015.10.038"
}

Radisavljević, I., Novaković, N., Romčević, N. Ž., Mitrić, M., Kuzmanović, B., Bojanić, S.,& Ivanović, N.. (2015). Electronic aspects of formation and properties of local structures around Mn in Cd1-xMnxTe1-ySey. in Materials Chemistry and Physics
Elsevier., 167, 236-245.
https://doi.org/10.1016/j.matchemphys.2015.10.038

Radisavljević I, Novaković N, Romčević NŽ, Mitrić M, Kuzmanović B, Bojanić S, Ivanović N. Electronic aspects of formation and properties of local structures around Mn in Cd1-xMnxTe1-ySey. in Materials Chemistry and Physics. 2015;167:236-245.
doi:10.1016/j.matchemphys.2015.10.038 .

Radisavljević, Ivana, Novaković, Nikola, Romčević, Nebojša Ž., Mitrić, Miodrag, Kuzmanović, Bojana, Bojanić, Slobodan, Ivanović, Nenad, "Electronic aspects of formation and properties of local structures around Mn in Cd1-xMnxTe1-ySey" in Materials Chemistry and Physics, 167 (2015):236-245,
https://doi.org/10.1016/j.matchemphys.2015.10.038 . .