Vrbica, Boško

Link to this page

Authority KeyName Variants
97c82e04-962f-4d5d-81c6-cb305e6e18d9
  • Vrbica, Boško (3)

Author's Bibliography

Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles

Anđelković, Ljubica; Šuljagić, Marija; Pavlović, Vladimir; Mirković, Miljana; Vrbica, Boško; Novaković, Irena; Stanković, Dalibor; Kremenović, Aleksandar; Uskoković, Vuk

(2024)

TY  - JOUR
AU  - Anđelković, Ljubica
AU  - Šuljagić, Marija
AU  - Pavlović, Vladimir
AU  - Mirković, Miljana
AU  - Vrbica, Boško
AU  - Novaković, Irena
AU  - Stanković, Dalibor
AU  - Kremenović, Aleksandar
AU  - Uskoković, Vuk
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13175
AB  - Metals and metal oxides have subpar antibacterial activities compared to those of small-molecule antibiotics, yet there are hopes that with proper compositional and structural adjustments this gap might be bridged. In this study, titanium dioxide (TiO2) nanoparticles were mechanically activated and combined with particulate silver through simple reduction process elicited by UV irradiation and assisted with the ultrasound. The resulting powders in various combinations (Ag vs. no Ag, activated vs. non-activated) were characterized using a range of experimental techniques and assessed for their antibacterial activities. The preparation procedure presented in this work prevails over the disadvantages of many chemical routes, most critically by avoiding the use of toxic substances. The mechanical activation did not reduce the particle size or crystallinity of TiO2 nor did it consistently alter the bandgap, yet it enabled the doubling of the amount of silver incorporable into the material. Further, while both mechanical activation and the addition of silver in the amount not exceeding 0.5 wt% produced barely detectable structural changes in the material, they both augmented its antibacterial activity. The precursor TiO2 powder produced no inhibition zone against any of the four bacterial species tested, while the mechanical activation of TiO2 led to the formation of distinct inhibition zones against each of the four bacterial species tested. The addition of silver to activated TiO2 further widened the inhibition zones and it also imparted the antibacterial activity to non-activated TiO2. The boost in the antibacterial activity achieved by the short mechanical activation was of a similar magnitude as the boost obtained after the addition of silver. The antibacterial activity was not different for different species when no silver was added to the system. However, with the addition of silver, species selectivity was obtained, as the composites were more effective against the two Gram-negative species (Escherichia coli and Klebsiella pneumoniae) than against the two Gram-positive ones (Staphylococcus aureus and Bacillus subtilis). The antibacterial activity increased with the addition of silver in the broth assay, but it was mediocre compared to that detected in the agar assay, attesting to the poor dispersability of the powders and their best performance when the bacterial cells migrate to the composite surface than vice versa. The findings of this study give hope that with appropriate microstructural or compositional alterations, the antibacterial activity of metal oxide powders and inorganic materials in general can be made comparable to that of small-molecule antibiotics.
T2  - Colloids and Surfaces A: Physicochemical and Engineering Aspects
T1  - Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles
VL  - 691
SP  - 133890
DO  - 10.1016/j.colsurfa.2024.133890
ER  - 
@article{
author = "Anđelković, Ljubica and Šuljagić, Marija and Pavlović, Vladimir and Mirković, Miljana and Vrbica, Boško and Novaković, Irena and Stanković, Dalibor and Kremenović, Aleksandar and Uskoković, Vuk",
year = "2024",
abstract = "Metals and metal oxides have subpar antibacterial activities compared to those of small-molecule antibiotics, yet there are hopes that with proper compositional and structural adjustments this gap might be bridged. In this study, titanium dioxide (TiO2) nanoparticles were mechanically activated and combined with particulate silver through simple reduction process elicited by UV irradiation and assisted with the ultrasound. The resulting powders in various combinations (Ag vs. no Ag, activated vs. non-activated) were characterized using a range of experimental techniques and assessed for their antibacterial activities. The preparation procedure presented in this work prevails over the disadvantages of many chemical routes, most critically by avoiding the use of toxic substances. The mechanical activation did not reduce the particle size or crystallinity of TiO2 nor did it consistently alter the bandgap, yet it enabled the doubling of the amount of silver incorporable into the material. Further, while both mechanical activation and the addition of silver in the amount not exceeding 0.5 wt% produced barely detectable structural changes in the material, they both augmented its antibacterial activity. The precursor TiO2 powder produced no inhibition zone against any of the four bacterial species tested, while the mechanical activation of TiO2 led to the formation of distinct inhibition zones against each of the four bacterial species tested. The addition of silver to activated TiO2 further widened the inhibition zones and it also imparted the antibacterial activity to non-activated TiO2. The boost in the antibacterial activity achieved by the short mechanical activation was of a similar magnitude as the boost obtained after the addition of silver. The antibacterial activity was not different for different species when no silver was added to the system. However, with the addition of silver, species selectivity was obtained, as the composites were more effective against the two Gram-negative species (Escherichia coli and Klebsiella pneumoniae) than against the two Gram-positive ones (Staphylococcus aureus and Bacillus subtilis). The antibacterial activity increased with the addition of silver in the broth assay, but it was mediocre compared to that detected in the agar assay, attesting to the poor dispersability of the powders and their best performance when the bacterial cells migrate to the composite surface than vice versa. The findings of this study give hope that with appropriate microstructural or compositional alterations, the antibacterial activity of metal oxide powders and inorganic materials in general can be made comparable to that of small-molecule antibiotics.",
journal = "Colloids and Surfaces A: Physicochemical and Engineering Aspects",
title = "Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles",
volume = "691",
pages = "133890",
doi = "10.1016/j.colsurfa.2024.133890"
}
Anđelković, L., Šuljagić, M., Pavlović, V., Mirković, M., Vrbica, B., Novaković, I., Stanković, D., Kremenović, A.,& Uskoković, V.. (2024). Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles. in Colloids and Surfaces A: Physicochemical and Engineering Aspects, 691, 133890.
https://doi.org/10.1016/j.colsurfa.2024.133890
Anđelković L, Šuljagić M, Pavlović V, Mirković M, Vrbica B, Novaković I, Stanković D, Kremenović A, Uskoković V. Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles. in Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2024;691:133890.
doi:10.1016/j.colsurfa.2024.133890 .
Anđelković, Ljubica, Šuljagić, Marija, Pavlović, Vladimir, Mirković, Miljana, Vrbica, Boško, Novaković, Irena, Stanković, Dalibor, Kremenović, Aleksandar, Uskoković, Vuk, "Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles" in Colloids and Surfaces A: Physicochemical and Engineering Aspects, 691 (2024):133890,
https://doi.org/10.1016/j.colsurfa.2024.133890 . .

Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials

Đukić, Dunja; Šuljagić, Marija; Anđelković, Ljubica; Pavlović, Vera; Bučevac, Dušan; Vrbica, Boško; Mirković, Miljana M.

(2022)

TY  - JOUR
AU  - Đukić, Dunja
AU  - Šuljagić, Marija
AU  - Anđelković, Ljubica
AU  - Pavlović, Vera
AU  - Bučevac, Dušan
AU  - Vrbica, Boško
AU  - Mirković, Miljana M.
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10433
AB  - The effect of Ca2+ amount and sintering temperature on mechanical properties of geopolymer-brushite (GPB) binders was investigated. Brushite and raw abandoned kaolinite clay thermally transformed into metakaolin were used for GPB synthesis. The complete phase and structural analyses were performed by X-ray powder diffraction, and Fourier transforms infrared spectroscopy (FT-IR). The pore-filling effect as a consequence of Ca2+ ions incorporation into the hybrid geopolymer networks improved the compressive strength. On the other hand, the chosen biscuit sintering at 800 and 900oC caused the phase transformation of brushite into calcium pyrophosphate, which negatively affected the compressive strength of such materials. The obtained results indicate that the usage of relatively high sintering temperatures is not always the necessary step for producing geopolymer-based types of cement with prominent mechanical properties.
T2  - Science of Sintering
T1  - Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials
VL  - 54
IS  - 3
DO  - 10.2298/SOS2203287D
ER  - 
@article{
author = "Đukić, Dunja and Šuljagić, Marija and Anđelković, Ljubica and Pavlović, Vera and Bučevac, Dušan and Vrbica, Boško and Mirković, Miljana M.",
year = "2022",
abstract = "The effect of Ca2+ amount and sintering temperature on mechanical properties of geopolymer-brushite (GPB) binders was investigated. Brushite and raw abandoned kaolinite clay thermally transformed into metakaolin were used for GPB synthesis. The complete phase and structural analyses were performed by X-ray powder diffraction, and Fourier transforms infrared spectroscopy (FT-IR). The pore-filling effect as a consequence of Ca2+ ions incorporation into the hybrid geopolymer networks improved the compressive strength. On the other hand, the chosen biscuit sintering at 800 and 900oC caused the phase transformation of brushite into calcium pyrophosphate, which negatively affected the compressive strength of such materials. The obtained results indicate that the usage of relatively high sintering temperatures is not always the necessary step for producing geopolymer-based types of cement with prominent mechanical properties.",
journal = "Science of Sintering",
title = "Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials",
volume = "54",
number = "3",
doi = "10.2298/SOS2203287D"
}
Đukić, D., Šuljagić, M., Anđelković, L., Pavlović, V., Bučevac, D., Vrbica, B.,& Mirković, M. M.. (2022). Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials. in Science of Sintering, 54(3).
https://doi.org/10.2298/SOS2203287D
Đukić D, Šuljagić M, Anđelković L, Pavlović V, Bučevac D, Vrbica B, Mirković MM. Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials. in Science of Sintering. 2022;54(3).
doi:10.2298/SOS2203287D .
Đukić, Dunja, Šuljagić, Marija, Anđelković, Ljubica, Pavlović, Vera, Bučevac, Dušan, Vrbica, Boško, Mirković, Miljana M., "Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials" in Science of Sintering, 54, no. 3 (2022),
https://doi.org/10.2298/SOS2203287D . .

Silver distribution and binding mode as key determinants of the antimicrobial performance of iron oxide/silver nanocomposites

Šuljagić, Marija; Milenković, Milica; Uskoković, Vuk; Mirković, Miljana M.; Vrbica, Boško; Pavlović, Vladimir B.; Živković-Radovanović, Vukosava; Stanković, Dalibor M.; Anđelković, Ljubica

(2022)

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Milenković, Milica
AU  - Uskoković, Vuk
AU  - Mirković, Miljana M.
AU  - Vrbica, Boško
AU  - Pavlović, Vladimir B.
AU  - Živković-Radovanović, Vukosava
AU  - Stanković, Dalibor M.
AU  - Anđelković, Ljubica
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10386
AB  - The emerging threat of bacterial resistance to antibiotics prompts the urgent search for biomaterials for the treatment of infectious disease. Here we report on the synthesis and characterization of a multiphasic nanocomposite comprising magnetic iron oxide and silver nanoparticles. The method of synthesis involved the combustion of a metalorganic complex and reduction of the silver ions that were exchanged and/or adsorbed on the surface of iron oxide. Different physical and chemical treatments coupled to the reduction process, including ultrasound and Lugol's iodine solution, respectively, homogenized the distribution of the silver nanoparticles on the iron oxide phase. Remarkably, using ascorbic acid as a reductant enhanced the magnetic properties of the material as a result of the reduction of the magnetic matrix alongside the silver cations. The treatment with ultrasound detached large amounts of silver from the iron oxide phase and resulted in the lowest amount of silver incorporated in the nanocomposite. Despite that, this treatment led to the highest antibacterial activity against both Gram-positive and Gram-negative strains, indicating that the homogeneity of the distribution of silver on the iron oxide matrix is a more important determinant of the antibacterial performance than the amount of silver incorporated in the material. At the same time, the treatment with Lugol's iodine equally increased the distribution homogeneity, but induced excessive ion exchange and crystal lattice substitutions, thereby adversely affecting the antibacterial performance. This has indicated that the mode of binding silver to iron oxide can compensate for the positive effects of homogeneous distribution with respect to the antibacterial performance.
T2  - Materials Today Communications
T1  - Silver distribution and binding mode as key determinants of the antimicrobial performance of iron oxide/silver nanocomposites
VL  - 32
SP  - 104157
DO  - 10.1016/j.mtcomm.2022.104157
ER  - 
@article{
author = "Šuljagić, Marija and Milenković, Milica and Uskoković, Vuk and Mirković, Miljana M. and Vrbica, Boško and Pavlović, Vladimir B. and Živković-Radovanović, Vukosava and Stanković, Dalibor M. and Anđelković, Ljubica",
year = "2022",
abstract = "The emerging threat of bacterial resistance to antibiotics prompts the urgent search for biomaterials for the treatment of infectious disease. Here we report on the synthesis and characterization of a multiphasic nanocomposite comprising magnetic iron oxide and silver nanoparticles. The method of synthesis involved the combustion of a metalorganic complex and reduction of the silver ions that were exchanged and/or adsorbed on the surface of iron oxide. Different physical and chemical treatments coupled to the reduction process, including ultrasound and Lugol's iodine solution, respectively, homogenized the distribution of the silver nanoparticles on the iron oxide phase. Remarkably, using ascorbic acid as a reductant enhanced the magnetic properties of the material as a result of the reduction of the magnetic matrix alongside the silver cations. The treatment with ultrasound detached large amounts of silver from the iron oxide phase and resulted in the lowest amount of silver incorporated in the nanocomposite. Despite that, this treatment led to the highest antibacterial activity against both Gram-positive and Gram-negative strains, indicating that the homogeneity of the distribution of silver on the iron oxide matrix is a more important determinant of the antibacterial performance than the amount of silver incorporated in the material. At the same time, the treatment with Lugol's iodine equally increased the distribution homogeneity, but induced excessive ion exchange and crystal lattice substitutions, thereby adversely affecting the antibacterial performance. This has indicated that the mode of binding silver to iron oxide can compensate for the positive effects of homogeneous distribution with respect to the antibacterial performance.",
journal = "Materials Today Communications",
title = "Silver distribution and binding mode as key determinants of the antimicrobial performance of iron oxide/silver nanocomposites",
volume = "32",
pages = "104157",
doi = "10.1016/j.mtcomm.2022.104157"
}
Šuljagić, M., Milenković, M., Uskoković, V., Mirković, M. M., Vrbica, B., Pavlović, V. B., Živković-Radovanović, V., Stanković, D. M.,& Anđelković, L.. (2022). Silver distribution and binding mode as key determinants of the antimicrobial performance of iron oxide/silver nanocomposites. in Materials Today Communications, 32, 104157.
https://doi.org/10.1016/j.mtcomm.2022.104157
Šuljagić M, Milenković M, Uskoković V, Mirković MM, Vrbica B, Pavlović VB, Živković-Radovanović V, Stanković DM, Anđelković L. Silver distribution and binding mode as key determinants of the antimicrobial performance of iron oxide/silver nanocomposites. in Materials Today Communications. 2022;32:104157.
doi:10.1016/j.mtcomm.2022.104157 .
Šuljagić, Marija, Milenković, Milica, Uskoković, Vuk, Mirković, Miljana M., Vrbica, Boško, Pavlović, Vladimir B., Živković-Radovanović, Vukosava, Stanković, Dalibor M., Anđelković, Ljubica, "Silver distribution and binding mode as key determinants of the antimicrobial performance of iron oxide/silver nanocomposites" in Materials Today Communications, 32 (2022):104157,
https://doi.org/10.1016/j.mtcomm.2022.104157 . .
2
1