TY  - JOUR
AU  - Godiya, Chirag B.
AU  - Marcantoni, Enrico
AU  - Dunjić, Branko
AU  - Tomić, Miloš
AU  - Nikolić, Marija
AU  - Maletaškić, Jelena
AU  - Đonlagić, Jasna
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13115
AB  - Poly(methyl methacrylate) (PMMA)/clay nanocomposites (NCs) were prepared by suspension polymerization of methyl methacrylate in the presence of two different organoclays (Cloisite 30B, Cloisite 15A) with clay loading ranged from 0.5 to 5 wt%. Increase in molecular weight of the PMMA matrix with addition of the clay was revealed by gel permeation chromatography (GPC) and intrinsic viscosity measurements. As confirmed by X-ray diffraction (XRD), the NCs had an intercalated structure. The organoclays-MMA/PMMA compatibility was investigated by swelling tests and solubility parameter approach. Rheological behavior of PMMA NCs in molten state was analyzed through construction of master curves of complex viscosity, storage, and loss modulus by applying the time-temperature superposition procedure. Melt rheology, scanning electron microscopy (SEM), and UV/Vis spectroscopy results confirmed higher extent of clay dispersion in the NCs with Cloisite 30B. Compared to pure PMMA, all these NCs show increase of glass transition temperature as measured by DSC and improved thermal stability determined by thermogravimetric analysis (TGA). The results obtained by dynamic mechanical analysis showed that the storage modulus of the NCs was higher by incorporation of clay into the PMMA matrix, increasing as the amount of clay increased and that their mechanical performance was significantly enhanced.
T2  - Polymer Bulletin
T1  - Effect of organoclay modifier structure on the viscoelastic and thermal properties of poly(methyl methacrylate)/organoclay nanocomposites
VL  - 78
IS  - 6
SP  - 2911
EP  - 2932
DO  - 10.1007/s00289-020-03248-7
ER  - 

@article{
author = "Godiya, Chirag B. and Marcantoni, Enrico and Dunjić, Branko and Tomić, Miloš and Nikolić, Marija and Maletaškić, Jelena and Đonlagić, Jasna",
year = "2021",
abstract = "Poly(methyl methacrylate) (PMMA)/clay nanocomposites (NCs) were prepared by suspension polymerization of methyl methacrylate in the presence of two different organoclays (Cloisite 30B, Cloisite 15A) with clay loading ranged from 0.5 to 5 wt%. Increase in molecular weight of the PMMA matrix with addition of the clay was revealed by gel permeation chromatography (GPC) and intrinsic viscosity measurements. As confirmed by X-ray diffraction (XRD), the NCs had an intercalated structure. The organoclays-MMA/PMMA compatibility was investigated by swelling tests and solubility parameter approach. Rheological behavior of PMMA NCs in molten state was analyzed through construction of master curves of complex viscosity, storage, and loss modulus by applying the time-temperature superposition procedure. Melt rheology, scanning electron microscopy (SEM), and UV/Vis spectroscopy results confirmed higher extent of clay dispersion in the NCs with Cloisite 30B. Compared to pure PMMA, all these NCs show increase of glass transition temperature as measured by DSC and improved thermal stability determined by thermogravimetric analysis (TGA). The results obtained by dynamic mechanical analysis showed that the storage modulus of the NCs was higher by incorporation of clay into the PMMA matrix, increasing as the amount of clay increased and that their mechanical performance was significantly enhanced.",
journal = "Polymer Bulletin",
title = "Effect of organoclay modifier structure on the viscoelastic and thermal properties of poly(methyl methacrylate)/organoclay nanocomposites",
volume = "78",
number = "6",
pages = "2911-2932",
doi = "10.1007/s00289-020-03248-7"
}

Godiya, C. B., Marcantoni, E., Dunjić, B., Tomić, M., Nikolić, M., Maletaškić, J.,& Đonlagić, J.. (2021). Effect of organoclay modifier structure on the viscoelastic and thermal properties of poly(methyl methacrylate)/organoclay nanocomposites. in Polymer Bulletin, 78(6), 2911-2932.
https://doi.org/10.1007/s00289-020-03248-7

Godiya CB, Marcantoni E, Dunjić B, Tomić M, Nikolić M, Maletaškić J, Đonlagić J. Effect of organoclay modifier structure on the viscoelastic and thermal properties of poly(methyl methacrylate)/organoclay nanocomposites. in Polymer Bulletin. 2021;78(6):2911-2932.
doi:10.1007/s00289-020-03248-7 .

Godiya, Chirag B., Marcantoni, Enrico, Dunjić, Branko, Tomić, Miloš, Nikolić, Marija, Maletaškić, Jelena, Đonlagić, Jasna, "Effect of organoclay modifier structure on the viscoelastic and thermal properties of poly(methyl methacrylate)/organoclay nanocomposites" in Polymer Bulletin, 78, no. 6 (2021):2911-2932,
https://doi.org/10.1007/s00289-020-03248-7 . .

TY  - JOUR
AU  - Tomić, Miloš
AU  - Dunjić, Branko
AU  - Nikolić, Marija S.
AU  - Trifković, Kata
AU  - Stanković, Nadežda
AU  - Pavlović, Vladimir B.
AU  - Bajat, Jelena B.
AU  - Đonlagić, Jasna A.
PY  - 2019
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0300944018312487
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8076
AB  - In the present study the commercial multifunctional fatty acid polyamidoamine (PAA) was for the first time simultaneously applied as a curing agent and clay modifier for epoxy/clay nanocomposites (NC) based on diglycidyl ether of bisphenol A. The montmorillonite (Cloisite®Na + ) was modified with different quantities of partially and fully protonated polyamidoamine. The NCs with 0.5 wt% novel organoclay were prepared by solution intercalation method. The major aims of this paper are investigations of the effects of the composition of PAA modified clays on structure, mechanical, barrier properties and corrosion stability on steel substrates of NCs were studied. The thermogravimetric, flame photometry and X-ray diffraction analyses confirmed the efficient modification of clay surface with polyamidoamine, predominantly located within layers. The NCs exhibited an intercalated/exfoliated morphology and the presence of free amino groups and increased content of modifier facilitated dispersion of clay particles within the polymer matrix, as shown by electron microscopy techniques (SEM, TEM). Under an optimized loading of PAA (molar quantity of total amino groups per clay cation exchange capacity of 1.75), the layers in stacks were separated by 5.0 nm and high number of individual layers was present in NC. Clay modified by PAA with free amino groups showed increased storage modulus in the rubbery state, glass transition temperature of NCs, while dumping factor was decreased. The tensile test confirmed that introduction of flexible modifier on the epoxy/clay interface lead to increase in the ultimate tensile strenght and elongation at break by 31% and toughness up to 83%. The electrochemical impedance spectroscopy and permeability tests proved the pronounced barrier effect of clay particles against corrosive species and water vapor when high dispersion degree of clay in NC was achieved. © 2019 Elsevier B.V.
T2  - Progress in Organic Coatings
T1  - Polyamidoamine as a clay modifier and curing agent in preparation of epoxy nanocomposites
VL  - 131
SP  - 311
EP  - 321
DO  - 10.1016/j.porgcoat.2019.02.037
ER  - 

@article{
author = "Tomić, Miloš and Dunjić, Branko and Nikolić, Marija S. and Trifković, Kata and Stanković, Nadežda and Pavlović, Vladimir B. and Bajat, Jelena B. and Đonlagić, Jasna A.",
year = "2019",
abstract = "In the present study the commercial multifunctional fatty acid polyamidoamine (PAA) was for the first time simultaneously applied as a curing agent and clay modifier for epoxy/clay nanocomposites (NC) based on diglycidyl ether of bisphenol A. The montmorillonite (Cloisite®Na + ) was modified with different quantities of partially and fully protonated polyamidoamine. The NCs with 0.5 wt% novel organoclay were prepared by solution intercalation method. The major aims of this paper are investigations of the effects of the composition of PAA modified clays on structure, mechanical, barrier properties and corrosion stability on steel substrates of NCs were studied. The thermogravimetric, flame photometry and X-ray diffraction analyses confirmed the efficient modification of clay surface with polyamidoamine, predominantly located within layers. The NCs exhibited an intercalated/exfoliated morphology and the presence of free amino groups and increased content of modifier facilitated dispersion of clay particles within the polymer matrix, as shown by electron microscopy techniques (SEM, TEM). Under an optimized loading of PAA (molar quantity of total amino groups per clay cation exchange capacity of 1.75), the layers in stacks were separated by 5.0 nm and high number of individual layers was present in NC. Clay modified by PAA with free amino groups showed increased storage modulus in the rubbery state, glass transition temperature of NCs, while dumping factor was decreased. The tensile test confirmed that introduction of flexible modifier on the epoxy/clay interface lead to increase in the ultimate tensile strenght and elongation at break by 31% and toughness up to 83%. The electrochemical impedance spectroscopy and permeability tests proved the pronounced barrier effect of clay particles against corrosive species and water vapor when high dispersion degree of clay in NC was achieved. © 2019 Elsevier B.V.",
journal = "Progress in Organic Coatings",
title = "Polyamidoamine as a clay modifier and curing agent in preparation of epoxy nanocomposites",
volume = "131",
pages = "311-321",
doi = "10.1016/j.porgcoat.2019.02.037"
}

Tomić, M., Dunjić, B., Nikolić, M. S., Trifković, K., Stanković, N., Pavlović, V. B., Bajat, J. B.,& Đonlagić, J. A.. (2019). Polyamidoamine as a clay modifier and curing agent in preparation of epoxy nanocomposites. in Progress in Organic Coatings, 131, 311-321.
https://doi.org/10.1016/j.porgcoat.2019.02.037

Tomić M, Dunjić B, Nikolić MS, Trifković K, Stanković N, Pavlović VB, Bajat JB, Đonlagić JA. Polyamidoamine as a clay modifier and curing agent in preparation of epoxy nanocomposites. in Progress in Organic Coatings. 2019;131:311-321.
doi:10.1016/j.porgcoat.2019.02.037 .

Tomić, Miloš, Dunjić, Branko, Nikolić, Marija S., Trifković, Kata, Stanković, Nadežda, Pavlović, Vladimir B., Bajat, Jelena B., Đonlagić, Jasna A., "Polyamidoamine as a clay modifier and curing agent in preparation of epoxy nanocomposites" in Progress in Organic Coatings, 131 (2019):311-321,
https://doi.org/10.1016/j.porgcoat.2019.02.037 . .