Filipović, Nenad

Link to this page

Authority KeyName Variants
ff7a2e07-324d-450e-aa71-e8e98259a07a
  • Filipović, Nenad (4)
  • Filipović, Nenad D. (1)
Projects

Author's Bibliography

Hydrogen storage properties of MgH2–Tm: Ni-catalysis vs. mechanical milling

Babić, Bojana; Prvulović, Milica; Filipović, Nenad; Mravik, Željko; Sekulić, Zorana; Milošević Govedarović, Sanja S.; Milanović, Igor

(2023)

TY  - JOUR
AU  - Babić, Bojana
AU  - Prvulović, Milica
AU  - Filipović, Nenad
AU  - Mravik, Željko
AU  - Sekulić, Zorana
AU  - Milošević Govedarović, Sanja S.
AU  - Milanović, Igor
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10936
AB  - The influence of the addition of nickel on hydrogen desorption from the MgH2–Ni composite was investigated. The composite powder was ball-milled for 15, 30 and 45 min and characterized by XRD, SEM-EDS, PSD, DSC and TPD methods. It was observed that the uniform distribution of nickel decreases hydrogen desorption temperature by more than 100 °C. A kinetic model for the hydrogen desorption process was also determined. The hydrogen desorption reaction in catalyzed samples is described by the Avrami-Erofeev model with the value of parameter n = 4. The apparent activation energy of the hydrogen desorption reaction was decreased with the increase of milling time and the addition of nickel. It has been shown for the first time that two main processes (grinding and the catalytic effect) could be separately analyzed. It is concluded that for investigated short milling times, the catalytic effect of Ni is predominant.
T2  - International Journal of Hydrogen Energy
T1  - Hydrogen storage properties of MgH2–Tm: Ni-catalysis vs. mechanical milling
VL  - 54
SP  - 446
EP  - 456
DO  - 10.1016/j.ijhydene.2023.04.078
ER  - 
@article{
author = "Babić, Bojana and Prvulović, Milica and Filipović, Nenad and Mravik, Željko and Sekulić, Zorana and Milošević Govedarović, Sanja S. and Milanović, Igor",
year = "2023",
abstract = "The influence of the addition of nickel on hydrogen desorption from the MgH2–Ni composite was investigated. The composite powder was ball-milled for 15, 30 and 45 min and characterized by XRD, SEM-EDS, PSD, DSC and TPD methods. It was observed that the uniform distribution of nickel decreases hydrogen desorption temperature by more than 100 °C. A kinetic model for the hydrogen desorption process was also determined. The hydrogen desorption reaction in catalyzed samples is described by the Avrami-Erofeev model with the value of parameter n = 4. The apparent activation energy of the hydrogen desorption reaction was decreased with the increase of milling time and the addition of nickel. It has been shown for the first time that two main processes (grinding and the catalytic effect) could be separately analyzed. It is concluded that for investigated short milling times, the catalytic effect of Ni is predominant.",
journal = "International Journal of Hydrogen Energy",
title = "Hydrogen storage properties of MgH2–Tm: Ni-catalysis vs. mechanical milling",
volume = "54",
pages = "446-456",
doi = "10.1016/j.ijhydene.2023.04.078"
}
Babić, B., Prvulović, M., Filipović, N., Mravik, Ž., Sekulić, Z., Milošević Govedarović, S. S.,& Milanović, I.. (2023). Hydrogen storage properties of MgH2–Tm: Ni-catalysis vs. mechanical milling. in International Journal of Hydrogen Energy, 54, 446-456.
https://doi.org/10.1016/j.ijhydene.2023.04.078
Babić B, Prvulović M, Filipović N, Mravik Ž, Sekulić Z, Milošević Govedarović SS, Milanović I. Hydrogen storage properties of MgH2–Tm: Ni-catalysis vs. mechanical milling. in International Journal of Hydrogen Energy. 2023;54:446-456.
doi:10.1016/j.ijhydene.2023.04.078 .
Babić, Bojana, Prvulović, Milica, Filipović, Nenad, Mravik, Željko, Sekulić, Zorana, Milošević Govedarović, Sanja S., Milanović, Igor, "Hydrogen storage properties of MgH2–Tm: Ni-catalysis vs. mechanical milling" in International Journal of Hydrogen Energy, 54 (2023):446-456,
https://doi.org/10.1016/j.ijhydene.2023.04.078 . .
3
2

Synthesis and characterization of selenium nanoparticles in the presence of bovine serum albumin or poly (L-glutamic acid) for biomedical application

Filipović, Nenad; Stevanović, Magdalena; Škapin, Srečo Davor; Bračko, Ines; Uskoković, Dragan

(Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade, 2012)

TY  - CONF
AU  - Filipović, Nenad
AU  - Stevanović, Magdalena
AU  - Škapin, Srečo Davor
AU  - Bračko, Ines
AU  - Uskoković, Dragan
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/502
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7458
AB  - It is well known that selenium is an essential trace element playing the important roles in mammalian biology. For years, its organic forms and some salts have been used in studying its biological effects, but recently, selenium nanoparticles have gained great attention as a possible material for cancer therapy and prevention. In this study we report the facile and reproducible method for synthesis the nanoselenium by reduction of sodium selenite with an ascorbic acid, in the presence of a two stabilizing agents, bovine serum albumin (BSA) or poly (L-glutamic acid) (PGA). The influence of the sodium selenite/ascorbic acid ratio as well as the types and concentration of two different stabilizers on the wide variety physicochemical characteristics of obtained particles were examined.
PB  - Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade
C3  - Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts
T1  - Synthesis and characterization of selenium nanoparticles in the presence of bovine serum albumin or poly (L-glutamic acid) for biomedical application
SP  - 105
EP  - 105
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7458
ER  - 
@conference{
author = "Filipović, Nenad and Stevanović, Magdalena and Škapin, Srečo Davor and Bračko, Ines and Uskoković, Dragan",
year = "2012",
abstract = "It is well known that selenium is an essential trace element playing the important roles in mammalian biology. For years, its organic forms and some salts have been used in studying its biological effects, but recently, selenium nanoparticles have gained great attention as a possible material for cancer therapy and prevention. In this study we report the facile and reproducible method for synthesis the nanoselenium by reduction of sodium selenite with an ascorbic acid, in the presence of a two stabilizing agents, bovine serum albumin (BSA) or poly (L-glutamic acid) (PGA). The influence of the sodium selenite/ascorbic acid ratio as well as the types and concentration of two different stabilizers on the wide variety physicochemical characteristics of obtained particles were examined.",
publisher = "Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade",
journal = "Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts",
title = "Synthesis and characterization of selenium nanoparticles in the presence of bovine serum albumin or poly (L-glutamic acid) for biomedical application",
pages = "105-105",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7458"
}
Filipović, N., Stevanović, M., Škapin, S. D., Bračko, I.,& Uskoković, D.. (2012). Synthesis and characterization of selenium nanoparticles in the presence of bovine serum albumin or poly (L-glutamic acid) for biomedical application. in Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts
Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade., 105-105.
https://hdl.handle.net/21.15107/rcub_vinar_7458
Filipović N, Stevanović M, Škapin SD, Bračko I, Uskoković D. Synthesis and characterization of selenium nanoparticles in the presence of bovine serum albumin or poly (L-glutamic acid) for biomedical application. in Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts. 2012;:105-105.
https://hdl.handle.net/21.15107/rcub_vinar_7458 .
Filipović, Nenad, Stevanović, Magdalena, Škapin, Srečo Davor, Bračko, Ines, Uskoković, Dragan, "Synthesis and characterization of selenium nanoparticles in the presence of bovine serum albumin or poly (L-glutamic acid) for biomedical application" in Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts (2012):105-105,
https://hdl.handle.net/21.15107/rcub_vinar_7458 .

Effects of different cryoprotectants on morphology of lyophilized poly(ε-caprolactone) micro and nanospheres

Stupar, Petar; Stevanović, Magdalena; Filipović, Nenad; Pavlović, Vladimir B.; Nunić, Jana; Cundrič, Sandra; Filipič, Metka; Uskoković, Dragan

(Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade, 2012)

TY  - CONF
AU  - Stupar, Petar
AU  - Stevanović, Magdalena
AU  - Filipović, Nenad
AU  - Pavlović, Vladimir B.
AU  - Nunić, Jana
AU  - Cundrič, Sandra
AU  - Filipič, Metka
AU  - Uskoković, Dragan
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/531
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7473
AB  - A common limitation of using polymeric micro and nanoparticles in long-term conservation is due to their poor physical and chemical stability. Freeze-drying is one of the most convenient methods that enable further reconstitution of micro and nanoparticles for therapeutical use. Nevertheless, this process generates various stresses during freezing and desiccation steps. The aim of this study was to evaluate different cryoprotectants (protective excipients that are usually added to increase stability upon storage and protect the particles from freezing stress): sugars (glucose and sucrose) and polymers (PVA and PGA), on the outcome of freeze-dried poly(ε-caprolactone) micro and nanospheres. The best freeze-drying results in terms of morphological characteristics, analyzed with SEM, were achieved with glucose at concentration of 1%. The FTIR analysis confirmed that the molecular structure of PCL particles remained the same after the addition cryoprotectants.
PB  - Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade
C3  - Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts
T1  - Effects of different cryoprotectants on morphology of lyophilized poly(ε-caprolactone) micro and nanospheres
SP  - 104
EP  - 104
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7473
ER  - 
@conference{
author = "Stupar, Petar and Stevanović, Magdalena and Filipović, Nenad and Pavlović, Vladimir B. and Nunić, Jana and Cundrič, Sandra and Filipič, Metka and Uskoković, Dragan",
year = "2012",
abstract = "A common limitation of using polymeric micro and nanoparticles in long-term conservation is due to their poor physical and chemical stability. Freeze-drying is one of the most convenient methods that enable further reconstitution of micro and nanoparticles for therapeutical use. Nevertheless, this process generates various stresses during freezing and desiccation steps. The aim of this study was to evaluate different cryoprotectants (protective excipients that are usually added to increase stability upon storage and protect the particles from freezing stress): sugars (glucose and sucrose) and polymers (PVA and PGA), on the outcome of freeze-dried poly(ε-caprolactone) micro and nanospheres. The best freeze-drying results in terms of morphological characteristics, analyzed with SEM, were achieved with glucose at concentration of 1%. The FTIR analysis confirmed that the molecular structure of PCL particles remained the same after the addition cryoprotectants.",
publisher = "Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade",
journal = "Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts",
title = "Effects of different cryoprotectants on morphology of lyophilized poly(ε-caprolactone) micro and nanospheres",
pages = "104-104",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7473"
}
Stupar, P., Stevanović, M., Filipović, N., Pavlović, V. B., Nunić, J., Cundrič, S., Filipič, M.,& Uskoković, D.. (2012). Effects of different cryoprotectants on morphology of lyophilized poly(ε-caprolactone) micro and nanospheres. in Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts
Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade., 104-104.
https://hdl.handle.net/21.15107/rcub_vinar_7473
Stupar P, Stevanović M, Filipović N, Pavlović VB, Nunić J, Cundrič S, Filipič M, Uskoković D. Effects of different cryoprotectants on morphology of lyophilized poly(ε-caprolactone) micro and nanospheres. in Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts. 2012;:104-104.
https://hdl.handle.net/21.15107/rcub_vinar_7473 .
Stupar, Petar, Stevanović, Magdalena, Filipović, Nenad, Pavlović, Vladimir B., Nunić, Jana, Cundrič, Sandra, Filipič, Metka, Uskoković, Dragan, "Effects of different cryoprotectants on morphology of lyophilized poly(ε-caprolactone) micro and nanospheres" in Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts (2012):104-104,
https://hdl.handle.net/21.15107/rcub_vinar_7473 .

Synthesis and the effect of processing parameters on characteristics of poly-ε-caprolactone micro- and nanospheres

Filipović, Nenad; Stevanović, Magdalena; Pavlović, Vladimir B.; Radulović, Aleksandra; Stojanović, Zoran S.; Uskoković, Dragan

(Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2011)

TY  - CONF
AU  - Filipović, Nenad
AU  - Stevanović, Magdalena
AU  - Pavlović, Vladimir B.
AU  - Radulović, Aleksandra
AU  - Stojanović, Zoran S.
AU  - Uskoković, Dragan
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/692
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7514
AB  - Poly-ε-caprolactone (PCL) is a semicrystalline, biodegradable and biocompatible polymer. Its advantages, as high permeability to small drug molecules, failure to generate an acidic environment during degradation (as compared to polylactides and polyglycolides) and a slow degradation rate, make this aliphatic polyester suitable for extended long-term delivery over a period of more than one year. In this study PCL particles were prepared by physicochemical method with solvent/nonsolvent systems. The synthetic polymer polyvinylpyrrolidone (PVP) and natural polymer poly (α, γ, L-glutamic acid) (PGA), were used as stabilizers and their influence on size and morphology of the particles was examined. The results were compared with those obtained without the use of stabilizers. Characterization of obtained particles was performed by Fourier transform infrared spectroscopy. The morphology and size distribution were determined using SEM and particle analyzer.
PB  - Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts
C3  - Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia
T1  - Synthesis and the effect of processing parameters on characteristics of poly-ε-caprolactone micro- and nanospheres
SP  - 2
EP  - 2
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7514
ER  - 
@conference{
author = "Filipović, Nenad and Stevanović, Magdalena and Pavlović, Vladimir B. and Radulović, Aleksandra and Stojanović, Zoran S. and Uskoković, Dragan",
year = "2011",
abstract = "Poly-ε-caprolactone (PCL) is a semicrystalline, biodegradable and biocompatible polymer. Its advantages, as high permeability to small drug molecules, failure to generate an acidic environment during degradation (as compared to polylactides and polyglycolides) and a slow degradation rate, make this aliphatic polyester suitable for extended long-term delivery over a period of more than one year. In this study PCL particles were prepared by physicochemical method with solvent/nonsolvent systems. The synthetic polymer polyvinylpyrrolidone (PVP) and natural polymer poly (α, γ, L-glutamic acid) (PGA), were used as stabilizers and their influence on size and morphology of the particles was examined. The results were compared with those obtained without the use of stabilizers. Characterization of obtained particles was performed by Fourier transform infrared spectroscopy. The morphology and size distribution were determined using SEM and particle analyzer.",
publisher = "Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts",
journal = "Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia",
title = "Synthesis and the effect of processing parameters on characteristics of poly-ε-caprolactone micro- and nanospheres",
pages = "2-2",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7514"
}
Filipović, N., Stevanović, M., Pavlović, V. B., Radulović, A., Stojanović, Z. S.,& Uskoković, D.. (2011). Synthesis and the effect of processing parameters on characteristics of poly-ε-caprolactone micro- and nanospheres. in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts., 2-2.
https://hdl.handle.net/21.15107/rcub_vinar_7514
Filipović N, Stevanović M, Pavlović VB, Radulović A, Stojanović ZS, Uskoković D. Synthesis and the effect of processing parameters on characteristics of poly-ε-caprolactone micro- and nanospheres. in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia. 2011;:2-2.
https://hdl.handle.net/21.15107/rcub_vinar_7514 .
Filipović, Nenad, Stevanović, Magdalena, Pavlović, Vladimir B., Radulović, Aleksandra, Stojanović, Zoran S., Uskoković, Dragan, "Synthesis and the effect of processing parameters on characteristics of poly-ε-caprolactone micro- and nanospheres" in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia (2011):2-2,
https://hdl.handle.net/21.15107/rcub_vinar_7514 .

Biomaterijali

Balać, Igor; Bugarski, Branko M.; Ćosić, Irena; Dramićanin, Miroslav; Đorđević, Drago; Filipović, Nenad D.; Ignjatović, Nenad L.; Janaćković, Đorđe T.; Kojić, Miloš; Manojlović, Verica; Marković, Zoran M.; Obradović, Bojana; Pajić-Lijaković, Ivana; Pavlović, Miodrag; Plavšić, Milenko; Raković, Dejan; Ranković, Vladimir; Stojanović, Boban; Trajković, Vladimir S.; Uskoković, Dragan; Uskoković, Petar; Veljković, Dejan; Vlastelica, Ivo; Vunjak Novaković, Gordana

(Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala, 2010)

TY  - BOOK
AU  - Balać, Igor
AU  - Bugarski, Branko M.
AU  - Ćosić, Irena
AU  - Dramićanin, Miroslav
AU  - Đorđević, Drago
AU  - Filipović, Nenad D.
AU  - Ignjatović, Nenad L.
AU  - Janaćković, Đorđe T.
AU  - Kojić, Miloš
AU  - Manojlović, Verica
AU  - Marković, Zoran M.
AU  - Obradović, Bojana
AU  - Pajić-Lijaković, Ivana
AU  - Pavlović, Miodrag
AU  - Plavšić, Milenko
AU  - Raković, Dejan
AU  - Ranković, Vladimir
AU  - Stojanović, Boban
AU  - Trajković, Vladimir S.
AU  - Uskoković, Dragan
AU  - Uskoković, Petar
AU  - Veljković, Dejan
AU  - Vlastelica, Ivo
AU  - Vunjak Novaković, Gordana
PY  - 2010
UR  - http://dais.sanu.ac.rs/123456789/121
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7344
AB  - Početak XXI veka nesumnjivo je obeležen interdisciplinarnim i multidisciplinarnim naporima istraživača u različitim oblastima nauke. Jedna od najizrazitijih tendencija ovog tipa uočava se u biomedicinskim istraživanjima, gde se združuju napori lekara, biologa, genetičara i biohemičara, s jedne strane, i biofizičara i inženjera, s druge strane – sa ciljem dubljeg razumevanja zdravlja i bolesti, i primene ovih saznanja u biomedicinskoj praksi, tako važnoj u svakodnevnom životu ljudi.Kao rezultat ovih svetskih trendova, u Srbiji već više godina na nekoliko fakulteta postoji nastava iz oblasti biomedicinskog inženjerstva, sa ciljem da osposobi inženjere ovih usmerenja za multidisciplinarno povezivanje znanja iz oblasti tehnike sa biomedicinskim znanjima. Jedan od bazičnih predmeta ovih usmerenja jesu Biomaterijali, kojima je i posvećen naš udžbenik, čiji je cilj da predstavi pregled teorije i prakse biomaterijala u biomedicinskoj nauci.Nauka o biomaterijalima je nesumnjivo najmultidisciplinarnija od svih nauka, jer zahteva ovladavanje znanjima iz mnogih oblasti nauke i tehnologije, inženjerstva i medicine, kako bi naučnici iz oblasti biomaterijala mogli da se uhvate u koštac sa ovom profesijom. Zato posle uvodnog dela, udžbenik iz Biomaterijala sadrži četiri celine: (I) Osnovni biomedicinski koncepti i reakcije organizma na biomaterijale, (II) Struktura, fizičko-mehanička karakterizacija i modeliranje biomaterijala i tkiva, (III) Savremeni biomaterijali i tehnologije, (IV) Perspektive biomaterijala i tehnologija, iza kojih slede Zadaci sa rešenjima, Ispitna test pitanja i Ispitna teorijska pitanja, koji pomažu studentima da lakše savladaju veoma obimno i kompleksno gradivo. Na kraju svakog poglavlja data su pitanja za rekapitulaciju, kao i spisak dopunske literature za opcionu detaljniju obradu pojedinih oblasti.Grupa od dvadeset četiri profesionalca sa univerziteta i naučnih instituta, pod okriljem Instituta tehničkih nauka Srpske akademije nauka i umetnosti, Beograd, i Društva za istraživanje materijala Srbije (MRS Srbija) doprinela je pisanju ovog kapitalnog udžbenika o biomaterijalima, prvog do sada na srpskom jeziku. Mada uključivanje veće grupe autora nužno dovodi do stilske neujednačenosti, ipak je oblast biomaterijala toliko multidisciplinarna da je ovakav pristup bio neophodan, kako uostalom pokazuju slična svetska iskustva sa uključivanjem i preko pedeset autora. Ipak urednici su se potrudili da koliko je to moguće stilski i pedagoški ujednače udžbenik, kako bi bio korisna literatura za sve studente diplomskih, master i doktorskih studija iz biomedicinskog inženjerstva u Srbiji i okruženju.
PB  - Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala
T1  - Biomaterijali
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7344
ER  - 
@book{
author = "Balać, Igor and Bugarski, Branko M. and Ćosić, Irena and Dramićanin, Miroslav and Đorđević, Drago and Filipović, Nenad D. and Ignjatović, Nenad L. and Janaćković, Đorđe T. and Kojić, Miloš and Manojlović, Verica and Marković, Zoran M. and Obradović, Bojana and Pajić-Lijaković, Ivana and Pavlović, Miodrag and Plavšić, Milenko and Raković, Dejan and Ranković, Vladimir and Stojanović, Boban and Trajković, Vladimir S. and Uskoković, Dragan and Uskoković, Petar and Veljković, Dejan and Vlastelica, Ivo and Vunjak Novaković, Gordana",
year = "2010",
abstract = "Početak XXI veka nesumnjivo je obeležen interdisciplinarnim i multidisciplinarnim naporima istraživača u različitim oblastima nauke. Jedna od najizrazitijih tendencija ovog tipa uočava se u biomedicinskim istraživanjima, gde se združuju napori lekara, biologa, genetičara i biohemičara, s jedne strane, i biofizičara i inženjera, s druge strane – sa ciljem dubljeg razumevanja zdravlja i bolesti, i primene ovih saznanja u biomedicinskoj praksi, tako važnoj u svakodnevnom životu ljudi.Kao rezultat ovih svetskih trendova, u Srbiji već više godina na nekoliko fakulteta postoji nastava iz oblasti biomedicinskog inženjerstva, sa ciljem da osposobi inženjere ovih usmerenja za multidisciplinarno povezivanje znanja iz oblasti tehnike sa biomedicinskim znanjima. Jedan od bazičnih predmeta ovih usmerenja jesu Biomaterijali, kojima je i posvećen naš udžbenik, čiji je cilj da predstavi pregled teorije i prakse biomaterijala u biomedicinskoj nauci.Nauka o biomaterijalima je nesumnjivo najmultidisciplinarnija od svih nauka, jer zahteva ovladavanje znanjima iz mnogih oblasti nauke i tehnologije, inženjerstva i medicine, kako bi naučnici iz oblasti biomaterijala mogli da se uhvate u koštac sa ovom profesijom. Zato posle uvodnog dela, udžbenik iz Biomaterijala sadrži četiri celine: (I) Osnovni biomedicinski koncepti i reakcije organizma na biomaterijale, (II) Struktura, fizičko-mehanička karakterizacija i modeliranje biomaterijala i tkiva, (III) Savremeni biomaterijali i tehnologije, (IV) Perspektive biomaterijala i tehnologija, iza kojih slede Zadaci sa rešenjima, Ispitna test pitanja i Ispitna teorijska pitanja, koji pomažu studentima da lakše savladaju veoma obimno i kompleksno gradivo. Na kraju svakog poglavlja data su pitanja za rekapitulaciju, kao i spisak dopunske literature za opcionu detaljniju obradu pojedinih oblasti.Grupa od dvadeset četiri profesionalca sa univerziteta i naučnih instituta, pod okriljem Instituta tehničkih nauka Srpske akademije nauka i umetnosti, Beograd, i Društva za istraživanje materijala Srbije (MRS Srbija) doprinela je pisanju ovog kapitalnog udžbenika o biomaterijalima, prvog do sada na srpskom jeziku. Mada uključivanje veće grupe autora nužno dovodi do stilske neujednačenosti, ipak je oblast biomaterijala toliko multidisciplinarna da je ovakav pristup bio neophodan, kako uostalom pokazuju slična svetska iskustva sa uključivanjem i preko pedeset autora. Ipak urednici su se potrudili da koliko je to moguće stilski i pedagoški ujednače udžbenik, kako bi bio korisna literatura za sve studente diplomskih, master i doktorskih studija iz biomedicinskog inženjerstva u Srbiji i okruženju.",
publisher = "Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala",
title = "Biomaterijali",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7344"
}
Balać, I., Bugarski, B. M., Ćosić, I., Dramićanin, M., Đorđević, D., Filipović, N. D., Ignjatović, N. L., Janaćković, Đ. T., Kojić, M., Manojlović, V., Marković, Z. M., Obradović, B., Pajić-Lijaković, I., Pavlović, M., Plavšić, M., Raković, D., Ranković, V., Stojanović, B., Trajković, V. S., Uskoković, D., Uskoković, P., Veljković, D., Vlastelica, I.,& Vunjak Novaković, G.. (2010). Biomaterijali. 
Beograd : Institut tehničkih nauka Srpske akademije nauka i umetnosti; Društvo za istraživanje materijala..
https://hdl.handle.net/21.15107/rcub_vinar_7344
Balać I, Bugarski BM, Ćosić I, Dramićanin M, Đorđević D, Filipović ND, Ignjatović NL, Janaćković ĐT, Kojić M, Manojlović V, Marković ZM, Obradović B, Pajić-Lijaković I, Pavlović M, Plavšić M, Raković D, Ranković V, Stojanović B, Trajković VS, Uskoković D, Uskoković P, Veljković D, Vlastelica I, Vunjak Novaković G. Biomaterijali. 2010;.
https://hdl.handle.net/21.15107/rcub_vinar_7344 .
Balać, Igor, Bugarski, Branko M., Ćosić, Irena, Dramićanin, Miroslav, Đorđević, Drago, Filipović, Nenad D., Ignjatović, Nenad L., Janaćković, Đorđe T., Kojić, Miloš, Manojlović, Verica, Marković, Zoran M., Obradović, Bojana, Pajić-Lijaković, Ivana, Pavlović, Miodrag, Plavšić, Milenko, Raković, Dejan, Ranković, Vladimir, Stojanović, Boban, Trajković, Vladimir S., Uskoković, Dragan, Uskoković, Petar, Veljković, Dejan, Vlastelica, Ivo, Vunjak Novaković, Gordana, "Biomaterijali" (2010),
https://hdl.handle.net/21.15107/rcub_vinar_7344 .