TY  - JOUR
AU  - Mišković, Žarko
AU  - Mitrović, Radivoje
AU  - Maksimović, Vesna
AU  - Milivojević, Aleksandar
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1855
AB  - Analysis of the relevant literature has shown that only few researches are dealing with the bearings dynamic behaviour in real environmental conditions where high concentration of solid contaminant particles is evident. There is still no established mathematical correlation between bearings vibration characteristics, working time and concentration level of contaminant particles in their grease. Solving this problem was the main goal of research described in this paper. First step was thorough analysis of the chemical composition and structure of contamination particles directly causing the sample bearings failure on open pit coal mines. After that, specific experimental methodology was developed and implemented. Finally, by processing of the experimental results, new mathematical correlation between listed bearings characteristics was determined.
T2  - Tehnički vjesnik - Technical Gazette
T1  - Analysis and Prediction of Vibrations of Ball Bearings Contaminated By Open Pit Coal Mine Debris Particles
VL  - 24
IS  - 6
SP  - 1941
EP  - 1950
DO  - 10.17559/TV-20151203140843
ER  - 

@article{
author = "Mišković, Žarko and Mitrović, Radivoje and Maksimović, Vesna and Milivojević, Aleksandar",
year = "2017",
abstract = "Analysis of the relevant literature has shown that only few researches are dealing with the bearings dynamic behaviour in real environmental conditions where high concentration of solid contaminant particles is evident. There is still no established mathematical correlation between bearings vibration characteristics, working time and concentration level of contaminant particles in their grease. Solving this problem was the main goal of research described in this paper. First step was thorough analysis of the chemical composition and structure of contamination particles directly causing the sample bearings failure on open pit coal mines. After that, specific experimental methodology was developed and implemented. Finally, by processing of the experimental results, new mathematical correlation between listed bearings characteristics was determined.",
journal = "Tehnički vjesnik - Technical Gazette",
title = "Analysis and Prediction of Vibrations of Ball Bearings Contaminated By Open Pit Coal Mine Debris Particles",
volume = "24",
number = "6",
pages = "1941-1950",
doi = "10.17559/TV-20151203140843"
}

Mišković, Ž., Mitrović, R., Maksimović, V.,& Milivojević, A.. (2017). Analysis and Prediction of Vibrations of Ball Bearings Contaminated By Open Pit Coal Mine Debris Particles. in Tehnički vjesnik - Technical Gazette, 24(6), 1941-1950.
https://doi.org/10.17559/TV-20151203140843

Mišković Ž, Mitrović R, Maksimović V, Milivojević A. Analysis and Prediction of Vibrations of Ball Bearings Contaminated By Open Pit Coal Mine Debris Particles. in Tehnički vjesnik - Technical Gazette. 2017;24(6):1941-1950.
doi:10.17559/TV-20151203140843 .

Mišković, Žarko, Mitrović, Radivoje, Maksimović, Vesna, Milivojević, Aleksandar, "Analysis and Prediction of Vibrations of Ball Bearings Contaminated By Open Pit Coal Mine Debris Particles" in Tehnički vjesnik - Technical Gazette, 24, no. 6 (2017):1941-1950,
https://doi.org/10.17559/TV-20151203140843 . .

TY  - JOUR
AU  - Djapic, Mirko
AU  - Popović, Predrag
AU  - Lukić, Ljubomir
AU  - Mitrović, Radivoje
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5145
AB  - In the nineties years of the previous century, the European Union achieved, through introducing the New and Global Approach to technical harmonization and standardization, a significant improvement in the approach to conformity assessment of products, by integrating the requirements for technical products safety into the process of its designing. This was achieved by preventive analyzing and quantifying of risk levels in the design process with the objective of determining the scope of the needed safety systems. On the other hand, we have witnessed a rapid development and implementation of holistic approaches to risks management in enterprises, unified in the modem business practice by the name of Enterprise Risk Management (ERM). Going along that line, the paper presents basis of the E,U New and Global Approach and give an approach to integrating New Approach Directives risk assessment into the holistic approach of risks management in organization, such as ERM.
T2  - Technics Technologies Education Management / TTEM
T1  - Integrating Risk Assessment in the NAD into the ERM Model
VL  - 7
IS  - 3
SP  - 1044
EP  - 1054
UR  - https://hdl.handle.net/21.15107/rcub_vinar_5145
ER  - 

@article{
author = "Djapic, Mirko and Popović, Predrag and Lukić, Ljubomir and Mitrović, Radivoje",
year = "2012",
abstract = "In the nineties years of the previous century, the European Union achieved, through introducing the New and Global Approach to technical harmonization and standardization, a significant improvement in the approach to conformity assessment of products, by integrating the requirements for technical products safety into the process of its designing. This was achieved by preventive analyzing and quantifying of risk levels in the design process with the objective of determining the scope of the needed safety systems. On the other hand, we have witnessed a rapid development and implementation of holistic approaches to risks management in enterprises, unified in the modem business practice by the name of Enterprise Risk Management (ERM). Going along that line, the paper presents basis of the E,U New and Global Approach and give an approach to integrating New Approach Directives risk assessment into the holistic approach of risks management in organization, such as ERM.",
journal = "Technics Technologies Education Management / TTEM",
title = "Integrating Risk Assessment in the NAD into the ERM Model",
volume = "7",
number = "3",
pages = "1044-1054",
url = "https://hdl.handle.net/21.15107/rcub_vinar_5145"
}

Djapic, M., Popović, P., Lukić, L.,& Mitrović, R.. (2012). Integrating Risk Assessment in the NAD into the ERM Model. in Technics Technologies Education Management / TTEM, 7(3), 1044-1054.
https://hdl.handle.net/21.15107/rcub_vinar_5145

Djapic M, Popović P, Lukić L, Mitrović R. Integrating Risk Assessment in the NAD into the ERM Model. in Technics Technologies Education Management / TTEM. 2012;7(3):1044-1054.
https://hdl.handle.net/21.15107/rcub_vinar_5145 .

Djapic, Mirko, Popović, Predrag, Lukić, Ljubomir, Mitrović, Radivoje, "Integrating Risk Assessment in the NAD into the ERM Model" in Technics Technologies Education Management / TTEM, 7, no. 3 (2012):1044-1054,
https://hdl.handle.net/21.15107/rcub_vinar_5145 .

TY  - BOOK
AU  - Popović, Predrag
AU  - Čanić, Dragana
AU  - Tufegdžić, Miroslav
AU  - Kovačević, Ljubiša
AU  - Jovašević-Stojanović, Milena
AU  - Grahovac, Jelica
AU  - Pavlović, Mirjana
AU  - Kićević, Dušan
AU  - Turanjanin, Valentina
AU  - Tjapkin, Nikola
AU  - Đurđević, Aleksandar
AU  - Videnović, Aleksandar
AU  - Mitrović, Radivoje
AU  - Stamenić, Zoran
AU  - Petrović, Aleksandar
AU  - Mitrović, Nenad
AU  - Balać, Martina
AU  - Đapić, Mirko
AU  - Kokunešoski, Maja
PY  - 2009
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11431
PB  - Београд : Институт за нуклеарне науке "Винча"
T1  - Оцењивање усаглашености производа : развој инфракстуре
SP  - 432
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11431
ER  - 

@book{
editor = "Popović, Predrag, Mitrović, Radivoje",
author = "Popović, Predrag and Čanić, Dragana and Tufegdžić, Miroslav and Kovačević, Ljubiša and Jovašević-Stojanović, Milena and Grahovac, Jelica and Pavlović, Mirjana and Kićević, Dušan and Turanjanin, Valentina and Tjapkin, Nikola and Đurđević, Aleksandar and Videnović, Aleksandar and Mitrović, Radivoje and Stamenić, Zoran and Petrović, Aleksandar and Mitrović, Nenad and Balać, Martina and Đapić, Mirko and Kokunešoski, Maja",
year = "2009",
publisher = "Београд : Институт за нуклеарне науке "Винча"",
title = "Оцењивање усаглашености производа : развој инфракстуре",
pages = "432",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11431"
}

Popović, P., Mitrović, R., Popović, P., Čanić, D., Tufegdžić, M., Kovačević, L., Jovašević-Stojanović, M., Grahovac, J., Pavlović, M., Kićević, D., Turanjanin, V., Tjapkin, N., Đurđević, A., Videnović, A., Mitrović, R., Stamenić, Z., Petrović, A., Mitrović, N., Balać, M., Đapić, M.,& Kokunešoski, M.. (2009). Оцењивање усаглашености производа : развој инфракстуре. 
Београд : Институт за нуклеарне науке "Винча"., 432.
https://hdl.handle.net/21.15107/rcub_vinar_11431

Popović P, Mitrović R, Popović P, Čanić D, Tufegdžić M, Kovačević L, Jovašević-Stojanović M, Grahovac J, Pavlović M, Kićević D, Turanjanin V, Tjapkin N, Đurđević A, Videnović A, Mitrović R, Stamenić Z, Petrović A, Mitrović N, Balać M, Đapić M, Kokunešoski M. Оцењивање усаглашености производа : развој инфракстуре. 2009;:432.
https://hdl.handle.net/21.15107/rcub_vinar_11431 .

Popović, Predrag, Mitrović, Radivoje, Popović, Predrag, Čanić, Dragana, Tufegdžić, Miroslav, Kovačević, Ljubiša, Jovašević-Stojanović, Milena, Grahovac, Jelica, Pavlović, Mirjana, Kićević, Dušan, Turanjanin, Valentina, Tjapkin, Nikola, Đurđević, Aleksandar, Videnović, Aleksandar, Mitrović, Radivoje, Stamenić, Zoran, Petrović, Aleksandar, Mitrović, Nenad, Balać, Martina, Đapić, Mirko, Kokunešoski, Maja, "Оцењивање усаглашености производа : развој инфракстуре" (2009):432,
https://hdl.handle.net/21.15107/rcub_vinar_11431 .

TY  - JOUR
AU  - Tasić, Milan B.
AU  - Mitrović, Radivoje
AU  - Popović, Predrag
AU  - Tasić, Marko M.
PY  - 2009
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/3685
AB  - High-frequency cyclic load of fresh air supply to ventilator blades in thermo energetic facilities can cause the occurrence of fretting in the pressed overlap of ventilator shaft and socket. These loads can be generated by the resonant oscillations of ventilator blades and thermal residual stress due to welding. To prevent running in resonant conditions, the manufacturer of the ventilator defined a procedure of adjusting blades natural frequency in the process of production, as well as period control during exploitation period The numerical simulations and the accelerations measured and presented in this paper, enabling analysis of mass changes and rotation rate effects on resonant oscillations occurrence in fresh air ventilator.
T2  - Thermal Science
T1  - Influence of Running Conditions on Resonant Oscillations in Fresh-Air Ventilator Blades Used in Thermal Power Plants
VL  - 13
IS  - 1
SP  - 139
EP  - 146
DO  - 10.2298/TSCI0901139T
ER  - 

@article{
author = "Tasić, Milan B. and Mitrović, Radivoje and Popović, Predrag and Tasić, Marko M.",
year = "2009",
abstract = "High-frequency cyclic load of fresh air supply to ventilator blades in thermo energetic facilities can cause the occurrence of fretting in the pressed overlap of ventilator shaft and socket. These loads can be generated by the resonant oscillations of ventilator blades and thermal residual stress due to welding. To prevent running in resonant conditions, the manufacturer of the ventilator defined a procedure of adjusting blades natural frequency in the process of production, as well as period control during exploitation period The numerical simulations and the accelerations measured and presented in this paper, enabling analysis of mass changes and rotation rate effects on resonant oscillations occurrence in fresh air ventilator.",
journal = "Thermal Science",
title = "Influence of Running Conditions on Resonant Oscillations in Fresh-Air Ventilator Blades Used in Thermal Power Plants",
volume = "13",
number = "1",
pages = "139-146",
doi = "10.2298/TSCI0901139T"
}

Tasić, M. B., Mitrović, R., Popović, P.,& Tasić, M. M.. (2009). Influence of Running Conditions on Resonant Oscillations in Fresh-Air Ventilator Blades Used in Thermal Power Plants. in Thermal Science, 13(1), 139-146.
https://doi.org/10.2298/TSCI0901139T

Tasić MB, Mitrović R, Popović P, Tasić MM. Influence of Running Conditions on Resonant Oscillations in Fresh-Air Ventilator Blades Used in Thermal Power Plants. in Thermal Science. 2009;13(1):139-146.
doi:10.2298/TSCI0901139T .

Tasić, Milan B., Mitrović, Radivoje, Popović, Predrag, Tasić, Marko M., "Influence of Running Conditions on Resonant Oscillations in Fresh-Air Ventilator Blades Used in Thermal Power Plants" in Thermal Science, 13, no. 1 (2009):139-146,
https://doi.org/10.2298/TSCI0901139T . .