Rasuo, Basko

Link to this page

Authority KeyName Variants
9029b632-1047-4414-8cf6-8075c09802f9
  • Rasuo, Basko (2)
Projects

Author's Bibliography

On finite element analysis of sling wire rope subjected to axial loading

Kastratovic, Gordana; Vidanovic, Nenad; Bakić, Vukman; Rasuo, Basko

(2014)

TY  - JOUR
AU  - Kastratovic, Gordana
AU  - Vidanovic, Nenad
AU  - Bakić, Vukman
AU  - Rasuo, Basko
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/107
AB  - This paper explores some aspects of finite element modeling of 7 x 19 IWS (wire rope with Independent wire strand core), as mostly used sling wire rope. First, the 1 x 19 stainless steel wire strand core was investigated. The numerical analysis was carried out by the finite element method. In this analysis two different types of contacts were investigated: bonded and frictional contact. The strand core was subjected to two different types of axial loading. The obtained results were compared with the solutions calculated from the available literature. Finally, using the advanced modeling techniques, the parametric 3D model of 7 x 19 IWS was also analyzed by using the finite element method, in order to provide a better understanding and, hence, prediction, of the mechanical behavior of the sling wire ropes. (c) 2014 Elsevier Ltd. All rights reserved.
T2  - Ocean Engineering
T1  - On finite element analysis of sling wire rope subjected to axial loading
VL  - 88
SP  - 480
EP  - 487
DO  - 10.1016/j.oceaneng.2014.07.014
ER  - 
@article{
author = "Kastratovic, Gordana and Vidanovic, Nenad and Bakić, Vukman and Rasuo, Basko",
year = "2014",
abstract = "This paper explores some aspects of finite element modeling of 7 x 19 IWS (wire rope with Independent wire strand core), as mostly used sling wire rope. First, the 1 x 19 stainless steel wire strand core was investigated. The numerical analysis was carried out by the finite element method. In this analysis two different types of contacts were investigated: bonded and frictional contact. The strand core was subjected to two different types of axial loading. The obtained results were compared with the solutions calculated from the available literature. Finally, using the advanced modeling techniques, the parametric 3D model of 7 x 19 IWS was also analyzed by using the finite element method, in order to provide a better understanding and, hence, prediction, of the mechanical behavior of the sling wire ropes. (c) 2014 Elsevier Ltd. All rights reserved.",
journal = "Ocean Engineering",
title = "On finite element analysis of sling wire rope subjected to axial loading",
volume = "88",
pages = "480-487",
doi = "10.1016/j.oceaneng.2014.07.014"
}
Kastratovic, G., Vidanovic, N., Bakić, V.,& Rasuo, B.. (2014). On finite element analysis of sling wire rope subjected to axial loading. in Ocean Engineering, 88, 480-487.
https://doi.org/10.1016/j.oceaneng.2014.07.014
Kastratovic G, Vidanovic N, Bakić V, Rasuo B. On finite element analysis of sling wire rope subjected to axial loading. in Ocean Engineering. 2014;88:480-487.
doi:10.1016/j.oceaneng.2014.07.014 .
Kastratovic, Gordana, Vidanovic, Nenad, Bakić, Vukman, Rasuo, Basko, "On finite element analysis of sling wire rope subjected to axial loading" in Ocean Engineering, 88 (2014):480-487,
https://doi.org/10.1016/j.oceaneng.2014.07.014 . .
30
24
35

Numerical investigation of pulverized coal jet flame characteristics under different oxy-fuel conditions

Jovanović, Rastko D.; Rasuo, Basko; Stefanović, Predrag Lj.; Cvetinović, Dejan; Swiatkowski, Bartosz

(2013)

TY  - JOUR
AU  - Jovanović, Rastko D.
AU  - Rasuo, Basko
AU  - Stefanović, Predrag Lj.
AU  - Cvetinović, Dejan
AU  - Swiatkowski, Bartosz
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5311
AB  - Pulverized coal combustion in mixture of oxygen and recycled flue gasses, known as oxy-fuel combustion, is considered as one of the several possible alternatives to conventional pulverized coal combustion. Switching from conventional pulverized-coal combustion to oxy-fuel combustion brings significant changes in flame properties among which the most important are ignition properties and flame stability. This paper presents the results of experimental and numerical analysis of ignition phenomena under O-2/CO2 mixtures with different oxygen content. The main focus of the presented paper is to suggest novel ignition sub-model which can describe all possible ignition mechanisms. Proposed ignition sub-model together with Large Eddy Simulation (LES) turbulence modeling enables accurate prediction of main flame characteristics: ignition point position, ignition temperature, and flame stability. (C) 2012 Elsevier Ltd. All rights reserved.
T2  - International Journal of Heat and Mass Transfer
T1  - Numerical investigation of pulverized coal jet flame characteristics under different oxy-fuel conditions
VL  - 58
IS  - 1-2
SP  - 654
EP  - 662
DO  - 10.1016/j.ijheatmasstransfer.2012.11.070
ER  - 
@article{
author = "Jovanović, Rastko D. and Rasuo, Basko and Stefanović, Predrag Lj. and Cvetinović, Dejan and Swiatkowski, Bartosz",
year = "2013",
abstract = "Pulverized coal combustion in mixture of oxygen and recycled flue gasses, known as oxy-fuel combustion, is considered as one of the several possible alternatives to conventional pulverized coal combustion. Switching from conventional pulverized-coal combustion to oxy-fuel combustion brings significant changes in flame properties among which the most important are ignition properties and flame stability. This paper presents the results of experimental and numerical analysis of ignition phenomena under O-2/CO2 mixtures with different oxygen content. The main focus of the presented paper is to suggest novel ignition sub-model which can describe all possible ignition mechanisms. Proposed ignition sub-model together with Large Eddy Simulation (LES) turbulence modeling enables accurate prediction of main flame characteristics: ignition point position, ignition temperature, and flame stability. (C) 2012 Elsevier Ltd. All rights reserved.",
journal = "International Journal of Heat and Mass Transfer",
title = "Numerical investigation of pulverized coal jet flame characteristics under different oxy-fuel conditions",
volume = "58",
number = "1-2",
pages = "654-662",
doi = "10.1016/j.ijheatmasstransfer.2012.11.070"
}
Jovanović, R. D., Rasuo, B., Stefanović, P. Lj., Cvetinović, D.,& Swiatkowski, B.. (2013). Numerical investigation of pulverized coal jet flame characteristics under different oxy-fuel conditions. in International Journal of Heat and Mass Transfer, 58(1-2), 654-662.
https://doi.org/10.1016/j.ijheatmasstransfer.2012.11.070
Jovanović RD, Rasuo B, Stefanović PL, Cvetinović D, Swiatkowski B. Numerical investigation of pulverized coal jet flame characteristics under different oxy-fuel conditions. in International Journal of Heat and Mass Transfer. 2013;58(1-2):654-662.
doi:10.1016/j.ijheatmasstransfer.2012.11.070 .
Jovanović, Rastko D., Rasuo, Basko, Stefanović, Predrag Lj., Cvetinović, Dejan, Swiatkowski, Bartosz, "Numerical investigation of pulverized coal jet flame characteristics under different oxy-fuel conditions" in International Journal of Heat and Mass Transfer, 58, no. 1-2 (2013):654-662,
https://doi.org/10.1016/j.ijheatmasstransfer.2012.11.070 . .
17
15
19