TY  - JOUR
AU  - Milošević, Nenad D.
AU  - Raynaud, M
PY  - 2004
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2756
AB  - This paper presents an exact analytical solution of 2D transient temperature, caused by a non-periodical pulse heating of a cylindrical two-layer slab. The corresponding partial differential equations are solved step-by-step, using the separation of variables technique. Analytical/computational procedure for eigenvalue derivation is considered separately. General initial assumptions, such as existence of thermal contact resistance, thermal conduction and diffusion anisotropy, radiative heat losses, non-uniform heating, and finite absorption depth are accounted in the solution. Numerical simulations of temperature distribution throughout the sample are given at the end of the paper. (C) 2003 Elsevier Ltd. All rights reserved.
T2  - International Journal of Heat and Mass Transfer
T1  - Analytical solution of transient heat conduction in a two-layer anisotropic cylindrical slab excited superficially by a short laser pulse
VL  - 47
IS  - 8-9
SP  - 1627
EP  - 1641
DO  - 10.1016/j.ijheatmasstransfer.2003.10.023
ER  - 

@article{
author = "Milošević, Nenad D. and Raynaud, M",
year = "2004",
abstract = "This paper presents an exact analytical solution of 2D transient temperature, caused by a non-periodical pulse heating of a cylindrical two-layer slab. The corresponding partial differential equations are solved step-by-step, using the separation of variables technique. Analytical/computational procedure for eigenvalue derivation is considered separately. General initial assumptions, such as existence of thermal contact resistance, thermal conduction and diffusion anisotropy, radiative heat losses, non-uniform heating, and finite absorption depth are accounted in the solution. Numerical simulations of temperature distribution throughout the sample are given at the end of the paper. (C) 2003 Elsevier Ltd. All rights reserved.",
journal = "International Journal of Heat and Mass Transfer",
title = "Analytical solution of transient heat conduction in a two-layer anisotropic cylindrical slab excited superficially by a short laser pulse",
volume = "47",
number = "8-9",
pages = "1627-1641",
doi = "10.1016/j.ijheatmasstransfer.2003.10.023"
}

Milošević, N. D.,& Raynaud, M.. (2004). Analytical solution of transient heat conduction in a two-layer anisotropic cylindrical slab excited superficially by a short laser pulse. in International Journal of Heat and Mass Transfer, 47(8-9), 1627-1641.
https://doi.org/10.1016/j.ijheatmasstransfer.2003.10.023

Milošević ND, Raynaud M. Analytical solution of transient heat conduction in a two-layer anisotropic cylindrical slab excited superficially by a short laser pulse. in International Journal of Heat and Mass Transfer. 2004;47(8-9):1627-1641.
doi:10.1016/j.ijheatmasstransfer.2003.10.023 .

Milošević, Nenad D., Raynaud, M, "Analytical solution of transient heat conduction in a two-layer anisotropic cylindrical slab excited superficially by a short laser pulse" in International Journal of Heat and Mass Transfer, 47, no. 8-9 (2004):1627-1641,
https://doi.org/10.1016/j.ijheatmasstransfer.2003.10.023 . .

TY  - JOUR
AU  - Milošević, Nenad D.
AU  - Raynaud, M
AU  - Maglic, KD
PY  - 2003
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6366
AB  - The paper presents a description of the two-dimensional flash method for measuring the thermal diffusivity of deposited thin solid films and coatings, including the possibility of determination of the thermal contact resistance and the thermal anisotropy of the film or coating. Giving an analytical solution of the transient temperature as the consequence of transient two-dimensional heat conduction through the sample, the paper describes the estimation possibilities for the thermal diffusivity and thermal contact resistance, as well as for other typically unknown parameters of the model. Particular attention was given to the influence of known parameters on the estimation possibilities of unknown parameters. With such a study, essential information for the modeling of the experiment is provided. The experimental setups and demonstration of the proposed data reduction procedure are presented at the end of the paper. Having different estimation possibilities for measuring different locations of the sample, the results suggest using the data of several transient temperatures for more reliable and accurate simultaneous estimation of the thermal diffusivity and thermal contact resistance of deposited thin films and coatings.
T2  - International Journal of Thermophysics
T1  - Simultaneous estimation of the thermal diffusivity and thermal contact resistance of thin solid films and coatings using the two-dimensional flash method
VL  - 24
IS  - 3
SP  - 799
EP  - 819
DO  - 10.1023/A:1024000602687
ER  - 

@article{
author = "Milošević, Nenad D. and Raynaud, M and Maglic, KD",
year = "2003",
abstract = "The paper presents a description of the two-dimensional flash method for measuring the thermal diffusivity of deposited thin solid films and coatings, including the possibility of determination of the thermal contact resistance and the thermal anisotropy of the film or coating. Giving an analytical solution of the transient temperature as the consequence of transient two-dimensional heat conduction through the sample, the paper describes the estimation possibilities for the thermal diffusivity and thermal contact resistance, as well as for other typically unknown parameters of the model. Particular attention was given to the influence of known parameters on the estimation possibilities of unknown parameters. With such a study, essential information for the modeling of the experiment is provided. The experimental setups and demonstration of the proposed data reduction procedure are presented at the end of the paper. Having different estimation possibilities for measuring different locations of the sample, the results suggest using the data of several transient temperatures for more reliable and accurate simultaneous estimation of the thermal diffusivity and thermal contact resistance of deposited thin films and coatings.",
journal = "International Journal of Thermophysics",
title = "Simultaneous estimation of the thermal diffusivity and thermal contact resistance of thin solid films and coatings using the two-dimensional flash method",
volume = "24",
number = "3",
pages = "799-819",
doi = "10.1023/A:1024000602687"
}

Milošević, N. D., Raynaud, M.,& Maglic, K.. (2003). Simultaneous estimation of the thermal diffusivity and thermal contact resistance of thin solid films and coatings using the two-dimensional flash method. in International Journal of Thermophysics, 24(3), 799-819.
https://doi.org/10.1023/A:1024000602687

Milošević ND, Raynaud M, Maglic K. Simultaneous estimation of the thermal diffusivity and thermal contact resistance of thin solid films and coatings using the two-dimensional flash method. in International Journal of Thermophysics. 2003;24(3):799-819.
doi:10.1023/A:1024000602687 .

Milošević, Nenad D., Raynaud, M, Maglic, KD, "Simultaneous estimation of the thermal diffusivity and thermal contact resistance of thin solid films and coatings using the two-dimensional flash method" in International Journal of Thermophysics, 24, no. 3 (2003):799-819,
https://doi.org/10.1023/A:1024000602687 . .

TY  - JOUR
AU  - Milošević, Nenad D.
AU  - Raynaud, M
AU  - Maglic, KD
PY  - 2002
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2521
AB  - This paper proposes a technique for estimation of thermal contact resistance between two opaque solids. The laser flash method combined with an inverse approach based on the Gauss parameter estimation procedure is used. The analytical solution of the model of double-layer sample is given and the data reduction procedure is briefly described. Estimation possibilities of thermal contact resistance and other parameters of the model are analyzed. Particular attention is given to the influence of known parameter uncertainties. The estimation procedure is tested using simulated experimental data. New types of diagram are used to present and analyze the results. Results and discussion are given at the end of the paper.
T2  - Inverse Problems in Engineering
T1  - Estimation of thermal contact resistance between the materials of double-layer sample using the laser flash method
VL  - 10
IS  - 1
SP  - 85
EP  - 103
DO  - 10.1080/10682760290022528
ER  - 

@article{
author = "Milošević, Nenad D. and Raynaud, M and Maglic, KD",
year = "2002",
abstract = "This paper proposes a technique for estimation of thermal contact resistance between two opaque solids. The laser flash method combined with an inverse approach based on the Gauss parameter estimation procedure is used. The analytical solution of the model of double-layer sample is given and the data reduction procedure is briefly described. Estimation possibilities of thermal contact resistance and other parameters of the model are analyzed. Particular attention is given to the influence of known parameter uncertainties. The estimation procedure is tested using simulated experimental data. New types of diagram are used to present and analyze the results. Results and discussion are given at the end of the paper.",
journal = "Inverse Problems in Engineering",
title = "Estimation of thermal contact resistance between the materials of double-layer sample using the laser flash method",
volume = "10",
number = "1",
pages = "85-103",
doi = "10.1080/10682760290022528"
}

Milošević, N. D., Raynaud, M.,& Maglic, K.. (2002). Estimation of thermal contact resistance between the materials of double-layer sample using the laser flash method. in Inverse Problems in Engineering, 10(1), 85-103.
https://doi.org/10.1080/10682760290022528

Milošević ND, Raynaud M, Maglic K. Estimation of thermal contact resistance between the materials of double-layer sample using the laser flash method. in Inverse Problems in Engineering. 2002;10(1):85-103.
doi:10.1080/10682760290022528 .

Milošević, Nenad D., Raynaud, M, Maglic, KD, "Estimation of thermal contact resistance between the materials of double-layer sample using the laser flash method" in Inverse Problems in Engineering, 10, no. 1 (2002):85-103,
https://doi.org/10.1080/10682760290022528 . .