Peruško, Davor

Link to this page

Authority KeyName Variants
orcid::0000-0002-1763-0469
  • Peruško, Davor (72)
Projects
Physical processes in the synthesis of advanced nanostructured materials Fabrication and characterization of nano-photonic functional structrues in biomedicine and informatics
SPIRIT - Support of Public and Industrial Research using Ion Beam Technology Thin films of single wall carbon nanotubes and graphene for electronic application
Effects of laser radiation and plasma on novel materials in their synthesis, modification, and analysis SILAMPS - Silicon integrated lasers and optical amplifiers
Slovenian Research Agency [P2-0082] NFFA-Europe - Nanoscience Foundries and Fine Analysis - Europe
Holographic methods for generation of specific wave-fronts to better control quantum coherent effects in laser-atom interactions Functional, Functionalized and Advanced Nanomaterials
Ministry of Science and Environmental Protection of the Republic of Serbia [OI 141013], International Atomic Energy Agency, Vienna Slovenian Research Agency, Ministry of Science, Education, and Sports of the Republic of Croatia, COST Action [MP0903 Nanoalloy]
Slovenian Research Agency [P2-0082], IAEA, Vienna bilateral project Serbia-Slovakia (SK-SRB-2016-0038)
COST Action [MP0903] COST Action [MP0903 Nanoalloy], Center for Multidisciplinary Studies, Serbia
European Community [CM1104] European Community, COST Action [CM1104], Slovenian Research Agency, Ministry of Science, Education, and Sports of the Republic of Croatia
European Community, COST Action [MP1203] European Community [COST Action MP1203, COST Action MP1208]
European Community, COST Action [MP1208] European Community, COST Action [MP1208], National Authority for Research and Innovation in the frame of Nucleus programme [304/2011, 4N/2016]
European Union under REA (609427) German-Serbian DAAD bilateral collaboration (Project No. 451-03-01038/2015-09118/18)
IAEA, Vienna contract [17202] SASPRO - Mobility Programme of Slovak Academy of Sciences: Supportive Fund for Excellent Scientists
Physics of Ordered Nanostructures and New Materials in Photonics Size-, shape- and structure- dependent properties of nanoparticles and nanocomposites
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200017 (University of Belgrade, Institute of Nuclear Sciences 'Vinča', Belgrade-Vinča) Physics and Chemistry with Ion Beams

Author's Bibliography

Influence of Nitrogen Incorporation Sites on Structural and Optical Properties of Sputtered TiO2-N Thin Films with Improved Visible Light Activity

Pjević, Dejan J.; Savić, Tatjana D.; Petrović, Suzana; Peruško, Davor; Čomor, Mirjana; Kovač, Janez

(2021)

TY  - JOUR
AU  - Pjević, Dejan J.
AU  - Savić, Tatjana D.
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Čomor, Mirjana
AU  - Kovač, Janez
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9841
AB  - The influence of deposition and annealing parameters on optical, structural and photocatalytic properties of N-doped titanium-dioxide (TiO2) thin films have been studied. Anatase and anatase-rutile crystalline phase mixture TiO2 thin films were obtained depending on the reactive direct current (DC) sputtering and annealing conditions. Deposition in the nitrogen atmosphere produced N-doped TiO2 thin films with energy gap values shifted towards visible region in comparison with thin TiO2 films deposited without nitrogen in the atmosphere. The role of substitutional and interstitial nitrogen atoms incorporated in obtained crystalline structures during the deposition was shown important and was reflected in the efficiency of photocatalysis. It was found that thin TiO2 films with more substitutional incorporated nitrogen exhibits better photocatalytic properties. These results could be of importance towards achieving controlled synthesis of N-doped TiO2 thin films with desired structural and optical properties, especially with improved photo-activity in the visible part of the solar spectrum.
T2  - ECS Journal of Solid State Science and Technology
T1  - Influence of Nitrogen Incorporation Sites on Structural and Optical Properties of Sputtered TiO2-N Thin Films with Improved Visible Light Activity
VL  - 10
IS  - 5
SP  - 053002
DO  - 10.1149/2162-8777/abffb2
ER  - 
@article{
author = "Pjević, Dejan J. and Savić, Tatjana D. and Petrović, Suzana and Peruško, Davor and Čomor, Mirjana and Kovač, Janez",
year = "2021",
abstract = "The influence of deposition and annealing parameters on optical, structural and photocatalytic properties of N-doped titanium-dioxide (TiO2) thin films have been studied. Anatase and anatase-rutile crystalline phase mixture TiO2 thin films were obtained depending on the reactive direct current (DC) sputtering and annealing conditions. Deposition in the nitrogen atmosphere produced N-doped TiO2 thin films with energy gap values shifted towards visible region in comparison with thin TiO2 films deposited without nitrogen in the atmosphere. The role of substitutional and interstitial nitrogen atoms incorporated in obtained crystalline structures during the deposition was shown important and was reflected in the efficiency of photocatalysis. It was found that thin TiO2 films with more substitutional incorporated nitrogen exhibits better photocatalytic properties. These results could be of importance towards achieving controlled synthesis of N-doped TiO2 thin films with desired structural and optical properties, especially with improved photo-activity in the visible part of the solar spectrum.",
journal = "ECS Journal of Solid State Science and Technology",
title = "Influence of Nitrogen Incorporation Sites on Structural and Optical Properties of Sputtered TiO2-N Thin Films with Improved Visible Light Activity",
volume = "10",
number = "5",
pages = "053002",
doi = "10.1149/2162-8777/abffb2"
}
Pjević, D. J., Savić, T. D., Petrović, S., Peruško, D., Čomor, M.,& Kovač, J.. (2021). Influence of Nitrogen Incorporation Sites on Structural and Optical Properties of Sputtered TiO2-N Thin Films with Improved Visible Light Activity. in ECS Journal of Solid State Science and Technology, 10(5), 053002.
https://doi.org/10.1149/2162-8777/abffb2
Pjević DJ, Savić TD, Petrović S, Peruško D, Čomor M, Kovač J. Influence of Nitrogen Incorporation Sites on Structural and Optical Properties of Sputtered TiO2-N Thin Films with Improved Visible Light Activity. in ECS Journal of Solid State Science and Technology. 2021;10(5):053002.
doi:10.1149/2162-8777/abffb2 .
Pjević, Dejan J., Savić, Tatjana D., Petrović, Suzana, Peruško, Davor, Čomor, Mirjana, Kovač, Janez, "Influence of Nitrogen Incorporation Sites on Structural and Optical Properties of Sputtered TiO2-N Thin Films with Improved Visible Light Activity" in ECS Journal of Solid State Science and Technology, 10, no. 5 (2021):053002,
https://doi.org/10.1149/2162-8777/abffb2 . .

Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid

Mravik, Željko; Bajuk-Bogdanović, Danica V.; Mraković, Ana Đ.; Vukosavljević, Ljubiša; Trajić, Ivan; Kovač, Janez; Peruško, Davor; Gavrilov, Nemanja; Jovanović, Zoran M.

(2021)

TY  - JOUR
AU  - Mravik, Željko
AU  - Bajuk-Bogdanović, Danica V.
AU  - Mraković, Ana Đ.
AU  - Vukosavljević, Ljubiša
AU  - Trajić, Ivan
AU  - Kovač, Janez
AU  - Peruško, Davor
AU  - Gavrilov, Nemanja
AU  - Jovanović, Zoran M.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9150
AB  - In recent years polyoxometalates (POMs) have attracted significant research interest due to versatile properties. These properties are determined by the size, structure and elemental composition of POMs and hence play an important role in their application. In the present study, the ion beam irradiation (10 keV C+ ions, 5 × 1014–2.5 × 1015 ions/cm2) has been utilized for modification of physicochemical properties of 120 nm-thick layer of 12-tungstophosphoric acid (WPA). Scanning electron microscopy analysis of irradiated films showed change of morphology i.e. an increase of WPA grain size with irradiation and coalescence of grains at the highest fluence. This was accompanied by structural changes. Attenuated total reflectance Fourier transform infrared analysis revealed that vibration bands of Keggin anion became less pronounced as fluence increased, while Raman spectra appeared as strongly modified. The effect of irradiation with 1.25 × 1015 ions/cm2 on the structure of WPA was similar to the effect of thermal treatment at 600 °C. Irradiation of WPA led to decrease of the band gap (from 4.07 to 3.92 eV), which was correlated to transformation Keggin anions into a network of WO6 octahedra and PO4 tetrahedra. This is in line with increased number of W=Od bonds observed by UV–Visible diffuse reflectance spectroscopy. Beside transformation to bronzes a reduction of WPA was observed by X-ray Photoelectron Spectroscopy (shift to lower binding energy) and Raman methods, whereas the Raman spectra of irradiated samples were similar to heteropoly blue. The electrochemical properties of irradiated WPA were also assessed. Cyclic voltammetry measurements showed that at up to 1.25 × 1015 ions/cm2 lithiation capacity of WPA increases and activity for hydrogen evolution reaction (HER) improves. The highest fluence caused interconnection of WO6 octahedra, closing of lithiation pathways and decrease in the number of active sites for HER. Our results provide a novel insight into the effects of ion beam irradiation on WPA and demonstrate high potential for tuning of physicochemical properties of POMs that are relevant in wide range of applications. © 2021 Elsevier Ltd
T2  - Radiation Physics and Chemistry
T1  - Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid
VL  - 183
SP  - 109422
DO  - 10.1016/j.radphyschem.2021.109422
ER  - 
@article{
author = "Mravik, Željko and Bajuk-Bogdanović, Danica V. and Mraković, Ana Đ. and Vukosavljević, Ljubiša and Trajić, Ivan and Kovač, Janez and Peruško, Davor and Gavrilov, Nemanja and Jovanović, Zoran M.",
year = "2021",
abstract = "In recent years polyoxometalates (POMs) have attracted significant research interest due to versatile properties. These properties are determined by the size, structure and elemental composition of POMs and hence play an important role in their application. In the present study, the ion beam irradiation (10 keV C+ ions, 5 × 1014–2.5 × 1015 ions/cm2) has been utilized for modification of physicochemical properties of 120 nm-thick layer of 12-tungstophosphoric acid (WPA). Scanning electron microscopy analysis of irradiated films showed change of morphology i.e. an increase of WPA grain size with irradiation and coalescence of grains at the highest fluence. This was accompanied by structural changes. Attenuated total reflectance Fourier transform infrared analysis revealed that vibration bands of Keggin anion became less pronounced as fluence increased, while Raman spectra appeared as strongly modified. The effect of irradiation with 1.25 × 1015 ions/cm2 on the structure of WPA was similar to the effect of thermal treatment at 600 °C. Irradiation of WPA led to decrease of the band gap (from 4.07 to 3.92 eV), which was correlated to transformation Keggin anions into a network of WO6 octahedra and PO4 tetrahedra. This is in line with increased number of W=Od bonds observed by UV–Visible diffuse reflectance spectroscopy. Beside transformation to bronzes a reduction of WPA was observed by X-ray Photoelectron Spectroscopy (shift to lower binding energy) and Raman methods, whereas the Raman spectra of irradiated samples were similar to heteropoly blue. The electrochemical properties of irradiated WPA were also assessed. Cyclic voltammetry measurements showed that at up to 1.25 × 1015 ions/cm2 lithiation capacity of WPA increases and activity for hydrogen evolution reaction (HER) improves. The highest fluence caused interconnection of WO6 octahedra, closing of lithiation pathways and decrease in the number of active sites for HER. Our results provide a novel insight into the effects of ion beam irradiation on WPA and demonstrate high potential for tuning of physicochemical properties of POMs that are relevant in wide range of applications. © 2021 Elsevier Ltd",
journal = "Radiation Physics and Chemistry",
title = "Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid",
volume = "183",
pages = "109422",
doi = "10.1016/j.radphyschem.2021.109422"
}
Mravik, Ž., Bajuk-Bogdanović, D. V., Mraković, A. Đ., Vukosavljević, L., Trajić, I., Kovač, J., Peruško, D., Gavrilov, N.,& Jovanović, Z. M.. (2021). Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid. in Radiation Physics and Chemistry, 183, 109422.
https://doi.org/10.1016/j.radphyschem.2021.109422
Mravik Ž, Bajuk-Bogdanović DV, Mraković AĐ, Vukosavljević L, Trajić I, Kovač J, Peruško D, Gavrilov N, Jovanović ZM. Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid. in Radiation Physics and Chemistry. 2021;183:109422.
doi:10.1016/j.radphyschem.2021.109422 .
Mravik, Željko, Bajuk-Bogdanović, Danica V., Mraković, Ana Đ., Vukosavljević, Ljubiša, Trajić, Ivan, Kovač, Janez, Peruško, Davor, Gavrilov, Nemanja, Jovanović, Zoran M., "Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid" in Radiation Physics and Chemistry, 183 (2021):109422,
https://doi.org/10.1016/j.radphyschem.2021.109422 . .

Response of NIH 3T3 fibroblast cells on laser-induced periodic surface structures on a 15×(Ti/Zr)/Si multilayer system

Petrović, Suzana; Peruško, Davor; Mimidis, Alexandros; Kavatzikidou, Paraskevi; Kovač, Janez; Ranella, Anthi; Novaković, Mirjana M.; Popović, Maja; Stratakis, Emmanuel

(2020)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Mimidis, Alexandros
AU  - Kavatzikidou, Paraskevi
AU  - Kovač, Janez
AU  - Ranella, Anthi
AU  - Novaković, Mirjana M.
AU  - Popović, Maja
AU  - Stratakis, Emmanuel
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9785
AB  - Ultrafast laser processing with the formation of periodic surface nanostructures on the 15×(Ti/Zr)/Si multilayers is studied in order to the improve cell response. A novel nanocomposite structure in the form of 15x(Ti/Zr)/Si multilayer thin films, with satisfying mechanical properties and moderate biocompatibility, was deposited by ion sputtering on an Si substrate. The multilayer 15×(Ti/Zr)/Si thin films were modified by femtosecond laser pulses in air to induce the following modifications: (i) mixing of components inside of the multilayer structures, (ii) the formation of an ultrathin oxide layer at the surfaces, and (iii) surface nano-texturing with the creation of laser-induced periodic surface structure (LIPSS). The focus of this study was an examination of the novel Ti/Zr multilayer thin films in order to create a surface texture with suitable composition and structure for cell integration. Using the SEM and confocal microscopies of the laser-modified Ti/Zr surfaces with seeded cell culture (NIH 3T3 fibroblasts), it was found that cell adhesion and growth depend on the surface composition and morphological patterns. These results indicated a good proliferation of cells after two and four days with some tendency of the cell orientation along the LIPSSs. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
T2  - Nanomaterials
T1  - Response of NIH 3T3 fibroblast cells on laser-induced periodic surface structures on a 15×(Ti/Zr)/Si multilayer system
VL  - 10
IS  - 12
SP  - 1
EP  - 14
DO  - 10.3390/nano10122531
ER  - 
@article{
author = "Petrović, Suzana and Peruško, Davor and Mimidis, Alexandros and Kavatzikidou, Paraskevi and Kovač, Janez and Ranella, Anthi and Novaković, Mirjana M. and Popović, Maja and Stratakis, Emmanuel",
year = "2020",
abstract = "Ultrafast laser processing with the formation of periodic surface nanostructures on the 15×(Ti/Zr)/Si multilayers is studied in order to the improve cell response. A novel nanocomposite structure in the form of 15x(Ti/Zr)/Si multilayer thin films, with satisfying mechanical properties and moderate biocompatibility, was deposited by ion sputtering on an Si substrate. The multilayer 15×(Ti/Zr)/Si thin films were modified by femtosecond laser pulses in air to induce the following modifications: (i) mixing of components inside of the multilayer structures, (ii) the formation of an ultrathin oxide layer at the surfaces, and (iii) surface nano-texturing with the creation of laser-induced periodic surface structure (LIPSS). The focus of this study was an examination of the novel Ti/Zr multilayer thin films in order to create a surface texture with suitable composition and structure for cell integration. Using the SEM and confocal microscopies of the laser-modified Ti/Zr surfaces with seeded cell culture (NIH 3T3 fibroblasts), it was found that cell adhesion and growth depend on the surface composition and morphological patterns. These results indicated a good proliferation of cells after two and four days with some tendency of the cell orientation along the LIPSSs. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.",
journal = "Nanomaterials",
title = "Response of NIH 3T3 fibroblast cells on laser-induced periodic surface structures on a 15×(Ti/Zr)/Si multilayer system",
volume = "10",
number = "12",
pages = "1-14",
doi = "10.3390/nano10122531"
}
Petrović, S., Peruško, D., Mimidis, A., Kavatzikidou, P., Kovač, J., Ranella, A., Novaković, M. M., Popović, M.,& Stratakis, E.. (2020). Response of NIH 3T3 fibroblast cells on laser-induced periodic surface structures on a 15×(Ti/Zr)/Si multilayer system. in Nanomaterials, 10(12), 1-14.
https://doi.org/10.3390/nano10122531
Petrović S, Peruško D, Mimidis A, Kavatzikidou P, Kovač J, Ranella A, Novaković MM, Popović M, Stratakis E. Response of NIH 3T3 fibroblast cells on laser-induced periodic surface structures on a 15×(Ti/Zr)/Si multilayer system. in Nanomaterials. 2020;10(12):1-14.
doi:10.3390/nano10122531 .
Petrović, Suzana, Peruško, Davor, Mimidis, Alexandros, Kavatzikidou, Paraskevi, Kovač, Janez, Ranella, Anthi, Novaković, Mirjana M., Popović, Maja, Stratakis, Emmanuel, "Response of NIH 3T3 fibroblast cells on laser-induced periodic surface structures on a 15×(Ti/Zr)/Si multilayer system" in Nanomaterials, 10, no. 12 (2020):1-14,
https://doi.org/10.3390/nano10122531 . .
1
1
1

Silicon nanostructuring by Ag ions implantation through nanosphere lithography mask

Modrić-Šahbazović, Almedina; Novaković, Mirjana M.; Schmidt, Emanuel O.; Gazdić, Izet; Đokić, Veljko R.; Peruško, Davor; Bibić, Nataša M.; Ronning, Carsten; Rakočević, Zlatko Lj.

(2019)

TY  - JOUR
AU  - Modrić-Šahbazović, Almedina
AU  - Novaković, Mirjana M.
AU  - Schmidt, Emanuel O.
AU  - Gazdić, Izet
AU  - Đokić, Veljko R.
AU  - Peruško, Davor
AU  - Bibić, Nataša M.
AU  - Ronning, Carsten
AU  - Rakočević, Zlatko Lj.
PY  - 2019
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0925346718308231
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8016
AB  - Nanosphere lithography is an effective technique for high throughput fabrication of well-ordered patterns on large areas. This study reports on nanostructuring of silicon samples by means of Ag ions implantation through self-organized polystyrene (PS) masks. The PS nanospheres with a diameter of ∼150 nm were self-assembled in a hexagonal array on top of Si(100) wafers, and then used as a mask for subsequent 60 keV silver ion implantation. Different fluences were applied up to 2 × 1016 ions/cm2 in order to create a distribution of different sizes and densities of buried metal nanoparticles. The surface morphology and the subsurface structures were studied by scanning electron microscopy and cross-sectional transmission electron microscopy, as a function of the mask deformation upon irradiation and the implantation parameters itself. We demonstrate that Ag is implanted into Si only through the mask openings, thus forming a regular array of amorphized regions over the wide area of silicon substrate. These fragments are of similar dimensions of the spheres with widths of about 190 nm and distributed over 60 nm in depth due to the given ion range. At the subsurface region of the implanted fragments, the synthesis of small sized and optically active Ag nanoparticles is clearly observed. The samples show a strong absorption peak in the long-wavelength region from 689 to 745 nm characteristic for surface plasmon resonance excitations, which could be fitted well using the Maxwell-Garnett`s theory. © 2018 Elsevier B.V.
T2  - Optical Materials
T1  - Silicon nanostructuring by Ag ions implantation through nanosphere lithography mask
VL  - 88
SP  - 508
EP  - 515
DO  - 10.1016/j.optmat.2018.12.022
ER  - 
@article{
author = "Modrić-Šahbazović, Almedina and Novaković, Mirjana M. and Schmidt, Emanuel O. and Gazdić, Izet and Đokić, Veljko R. and Peruško, Davor and Bibić, Nataša M. and Ronning, Carsten and Rakočević, Zlatko Lj.",
year = "2019",
abstract = "Nanosphere lithography is an effective technique for high throughput fabrication of well-ordered patterns on large areas. This study reports on nanostructuring of silicon samples by means of Ag ions implantation through self-organized polystyrene (PS) masks. The PS nanospheres with a diameter of ∼150 nm were self-assembled in a hexagonal array on top of Si(100) wafers, and then used as a mask for subsequent 60 keV silver ion implantation. Different fluences were applied up to 2 × 1016 ions/cm2 in order to create a distribution of different sizes and densities of buried metal nanoparticles. The surface morphology and the subsurface structures were studied by scanning electron microscopy and cross-sectional transmission electron microscopy, as a function of the mask deformation upon irradiation and the implantation parameters itself. We demonstrate that Ag is implanted into Si only through the mask openings, thus forming a regular array of amorphized regions over the wide area of silicon substrate. These fragments are of similar dimensions of the spheres with widths of about 190 nm and distributed over 60 nm in depth due to the given ion range. At the subsurface region of the implanted fragments, the synthesis of small sized and optically active Ag nanoparticles is clearly observed. The samples show a strong absorption peak in the long-wavelength region from 689 to 745 nm characteristic for surface plasmon resonance excitations, which could be fitted well using the Maxwell-Garnett`s theory. © 2018 Elsevier B.V.",
journal = "Optical Materials",
title = "Silicon nanostructuring by Ag ions implantation through nanosphere lithography mask",
volume = "88",
pages = "508-515",
doi = "10.1016/j.optmat.2018.12.022"
}
Modrić-Šahbazović, A., Novaković, M. M., Schmidt, E. O., Gazdić, I., Đokić, V. R., Peruško, D., Bibić, N. M., Ronning, C.,& Rakočević, Z. Lj.. (2019). Silicon nanostructuring by Ag ions implantation through nanosphere lithography mask. in Optical Materials, 88, 508-515.
https://doi.org/10.1016/j.optmat.2018.12.022
Modrić-Šahbazović A, Novaković MM, Schmidt EO, Gazdić I, Đokić VR, Peruško D, Bibić NM, Ronning C, Rakočević ZL. Silicon nanostructuring by Ag ions implantation through nanosphere lithography mask. in Optical Materials. 2019;88:508-515.
doi:10.1016/j.optmat.2018.12.022 .
Modrić-Šahbazović, Almedina, Novaković, Mirjana M., Schmidt, Emanuel O., Gazdić, Izet, Đokić, Veljko R., Peruško, Davor, Bibić, Nataša M., Ronning, Carsten, Rakočević, Zlatko Lj., "Silicon nanostructuring by Ag ions implantation through nanosphere lithography mask" in Optical Materials, 88 (2019):508-515,
https://doi.org/10.1016/j.optmat.2018.12.022 . .
5
6
7

Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response

Petrović, Suzana; Peruško, Davor; Skoulas, E.; Kovač, Janez; Mitrić, Miodrag; Potočnik, Jelena; Rakočević, Zlatko Lj.; Stratakis, E.

(2019)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Skoulas, E.
AU  - Kovač, Janez
AU  - Mitrić, Miodrag
AU  - Potočnik, Jelena
AU  - Rakočević, Zlatko Lj.
AU  - Stratakis, E.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8816
AB  - The formation of an ordered surface texture with micro and nanometer features on Ti/Zr multilayers is studied for better understanding and improvement of cell integration. Nanocomposite in form 30×(Ti/Zr)/Si thin films was deposited by ion sputtering on Si substrate for biocompatibility investigation. Surface texturing by femtosecond laser processing made it possible to form the laser-induced periodic surface structure (LIPSS) in each laser-written line. At fluence slightly above the ablation threshold, beside the formation of low spatial frequency-LIPSS (LSFL) oriented perpendicular to the direction of the laser polarization, the laser-induced surface oxidation was achieved on the irradiated area. Intermixing between the Ti and Zr layers with the formation of alloy in the sub-surface region was attained during the laser processing. The surface of the Ti/Zr multilayer system with changed composition and topography was used to observe the effect of topography on the survival, adhesion and proliferation of the murine mesenchymal stem cells (MSCs). Confocal and SEM microscopy images showed that cell adhesion and their growth improve on these modified surfaces, with tendency of the cell orientation along of LIPSS in laser-written lines. © 2019 by the authors.
T2  - Coatings
T1  - Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response
VL  - 9
IS  - 12
SP  - 854
DO  - 10.3390/coatings9120854
ER  - 
@article{
author = "Petrović, Suzana and Peruško, Davor and Skoulas, E. and Kovač, Janez and Mitrić, Miodrag and Potočnik, Jelena and Rakočević, Zlatko Lj. and Stratakis, E.",
year = "2019",
abstract = "The formation of an ordered surface texture with micro and nanometer features on Ti/Zr multilayers is studied for better understanding and improvement of cell integration. Nanocomposite in form 30×(Ti/Zr)/Si thin films was deposited by ion sputtering on Si substrate for biocompatibility investigation. Surface texturing by femtosecond laser processing made it possible to form the laser-induced periodic surface structure (LIPSS) in each laser-written line. At fluence slightly above the ablation threshold, beside the formation of low spatial frequency-LIPSS (LSFL) oriented perpendicular to the direction of the laser polarization, the laser-induced surface oxidation was achieved on the irradiated area. Intermixing between the Ti and Zr layers with the formation of alloy in the sub-surface region was attained during the laser processing. The surface of the Ti/Zr multilayer system with changed composition and topography was used to observe the effect of topography on the survival, adhesion and proliferation of the murine mesenchymal stem cells (MSCs). Confocal and SEM microscopy images showed that cell adhesion and their growth improve on these modified surfaces, with tendency of the cell orientation along of LIPSS in laser-written lines. © 2019 by the authors.",
journal = "Coatings",
title = "Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response",
volume = "9",
number = "12",
pages = "854",
doi = "10.3390/coatings9120854"
}
Petrović, S., Peruško, D., Skoulas, E., Kovač, J., Mitrić, M., Potočnik, J., Rakočević, Z. Lj.,& Stratakis, E.. (2019). Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response. in Coatings, 9(12), 854.
https://doi.org/10.3390/coatings9120854
Petrović S, Peruško D, Skoulas E, Kovač J, Mitrić M, Potočnik J, Rakočević ZL, Stratakis E. Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response. in Coatings. 2019;9(12):854.
doi:10.3390/coatings9120854 .
Petrović, Suzana, Peruško, Davor, Skoulas, E., Kovač, Janez, Mitrić, Miodrag, Potočnik, Jelena, Rakočević, Zlatko Lj., Stratakis, E., "Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response" in Coatings, 9, no. 12 (2019):854,
https://doi.org/10.3390/coatings9120854 . .
2
2
2

Simple route for the preparation of graphene/poly(styrene-b-butadiene-b-styrene) nanocomposite films with enhanced electrical conductivity and hydrophobicity

Kepić, Dejan P.; Ristić, Ivan S.; Marinović-Cincović, Milena; Peruško, Davor; Špitalsky, Zdenko; Pavlović, Vladimir B.; Budimir, Milica; Šiffalovič, Peter; Dramićanin, Miroslav; Mičušik, Matej; Kleinova, Angela; Janigova, Ivica; Marković, Zoran M.; Todorović-Marković, Biljana

(2018)

TY  - JOUR
AU  - Kepić, Dejan P.
AU  - Ristić, Ivan S.
AU  - Marinović-Cincović, Milena
AU  - Peruško, Davor
AU  - Špitalsky, Zdenko
AU  - Pavlović, Vladimir B.
AU  - Budimir, Milica
AU  - Šiffalovič, Peter
AU  - Dramićanin, Miroslav
AU  - Mičušik, Matej
AU  - Kleinova, Angela
AU  - Janigova, Ivica
AU  - Marković, Zoran M.
AU  - Todorović-Marković, Biljana
PY  - 2018
UR  - http://doi.wiley.com/10.1002/pi.5620
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7796
AB  - This paper reports a simple route for the preparation of graphene/poly(styrene-b-butadiene-b-styrene) (SBS) nanocomposite films employing a vacuum filtration method. Graphene is exfoliated well by an electrochemical procedure and homogeneously dispersed in the polymer matrix. The prepared nanocomposite films were characterized by XRD, Fourier transform IR (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, AFM and SEM. Morphological studies showed that graphene formed a smooth coating over the surface of SBS. The increase in graphene concentration induces the wrinkling of graphene sheets at the composite surface which causes a further increase in surface roughness. The FTIR, Raman and XPS spectra of graphene/SBS nanocomposite films indicate the strong interactions between graphene and the polymer matrix. According to the XRD patterns, introducing SBS into graphene did not modify the graphene structure additionally, i.e. the crystal lattice parameters do not depend on SBS content in graphene/SBS nanocomposite films. The graphene/SBS nanocomposite films also exhibited better hydrophobicity due to the increased surface roughness and lower sheet resistivity (reduced 10 times) compared to exfoliated graphene.
T2  - Polymer International
T1  - Simple route for the preparation of graphene/poly(styrene-b-butadiene-b-styrene) nanocomposite films with enhanced electrical conductivity and hydrophobicity
VL  - 67
IS  - 8
SP  - 1118
EP  - 1127
DO  - 10.1002/pi.5620
ER  - 
@article{
author = "Kepić, Dejan P. and Ristić, Ivan S. and Marinović-Cincović, Milena and Peruško, Davor and Špitalsky, Zdenko and Pavlović, Vladimir B. and Budimir, Milica and Šiffalovič, Peter and Dramićanin, Miroslav and Mičušik, Matej and Kleinova, Angela and Janigova, Ivica and Marković, Zoran M. and Todorović-Marković, Biljana",
year = "2018",
abstract = "This paper reports a simple route for the preparation of graphene/poly(styrene-b-butadiene-b-styrene) (SBS) nanocomposite films employing a vacuum filtration method. Graphene is exfoliated well by an electrochemical procedure and homogeneously dispersed in the polymer matrix. The prepared nanocomposite films were characterized by XRD, Fourier transform IR (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, AFM and SEM. Morphological studies showed that graphene formed a smooth coating over the surface of SBS. The increase in graphene concentration induces the wrinkling of graphene sheets at the composite surface which causes a further increase in surface roughness. The FTIR, Raman and XPS spectra of graphene/SBS nanocomposite films indicate the strong interactions between graphene and the polymer matrix. According to the XRD patterns, introducing SBS into graphene did not modify the graphene structure additionally, i.e. the crystal lattice parameters do not depend on SBS content in graphene/SBS nanocomposite films. The graphene/SBS nanocomposite films also exhibited better hydrophobicity due to the increased surface roughness and lower sheet resistivity (reduced 10 times) compared to exfoliated graphene.",
journal = "Polymer International",
title = "Simple route for the preparation of graphene/poly(styrene-b-butadiene-b-styrene) nanocomposite films with enhanced electrical conductivity and hydrophobicity",
volume = "67",
number = "8",
pages = "1118-1127",
doi = "10.1002/pi.5620"
}
Kepić, D. P., Ristić, I. S., Marinović-Cincović, M., Peruško, D., Špitalsky, Z., Pavlović, V. B., Budimir, M., Šiffalovič, P., Dramićanin, M., Mičušik, M., Kleinova, A., Janigova, I., Marković, Z. M.,& Todorović-Marković, B.. (2018). Simple route for the preparation of graphene/poly(styrene-b-butadiene-b-styrene) nanocomposite films with enhanced electrical conductivity and hydrophobicity. in Polymer International, 67(8), 1118-1127.
https://doi.org/10.1002/pi.5620
Kepić DP, Ristić IS, Marinović-Cincović M, Peruško D, Špitalsky Z, Pavlović VB, Budimir M, Šiffalovič P, Dramićanin M, Mičušik M, Kleinova A, Janigova I, Marković ZM, Todorović-Marković B. Simple route for the preparation of graphene/poly(styrene-b-butadiene-b-styrene) nanocomposite films with enhanced electrical conductivity and hydrophobicity. in Polymer International. 2018;67(8):1118-1127.
doi:10.1002/pi.5620 .
Kepić, Dejan P., Ristić, Ivan S., Marinović-Cincović, Milena, Peruško, Davor, Špitalsky, Zdenko, Pavlović, Vladimir B., Budimir, Milica, Šiffalovič, Peter, Dramićanin, Miroslav, Mičušik, Matej, Kleinova, Angela, Janigova, Ivica, Marković, Zoran M., Todorović-Marković, Biljana, "Simple route for the preparation of graphene/poly(styrene-b-butadiene-b-styrene) nanocomposite films with enhanced electrical conductivity and hydrophobicity" in Polymer International, 67, no. 8 (2018):1118-1127,
https://doi.org/10.1002/pi.5620 . .
3
3
3

Laser induced mixing in multilayered Ti/Ta thin film structures

Obradović, Marko O.; Kovač, Janez; Petrović, Suzana; Lazović, Vladimir M.; Salatić, Branislav; Ciganović, Jovan; Pjević, Dejan J.; Milosavljević, Momir; Peruško, Davor

(2018)

TY  - JOUR
AU  - Obradović, Marko O.
AU  - Kovač, Janez
AU  - Petrović, Suzana
AU  - Lazović, Vladimir M.
AU  - Salatić, Branislav
AU  - Ciganović, Jovan
AU  - Pjević, Dejan J.
AU  - Milosavljević, Momir
AU  - Peruško, Davor
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7721
AB  - The possibility of interlayer mixing in a Ti/Ta multilayer system, induced by laser irradiation, was the main purpose of these experiments. Ti/Ta multilayer system, consisting of ten alternating Ti and Ta thin films and covered by slightly thicker Ti layer, was deposited on Si (100) wafers to a total thickness of 205 nm. Laser irradiation was performed in air by picoseconds Nd:YAG laser pulses in defocused regime with fluences of 0.057 and 0.11 J cm−2. Laser beam was scanned over the 5 × 5 mm surface area with different steps along y-axes. Structural and compositional characterisation was done by auger electron spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy, and scanning electron microscopy. Laser processing at lower fluence caused only oxidation of the top Ti layer, despite of the number of applied laser pulses. Interlayer mixing was not observed. Application of laser pulses at fluence of 0.11 J cm−2caused partial and/or complete ablation of deposited layers. In partially ablated regions considerable mixing between Ti and Ta films was registered.
T2  - Optical and Quantum Electronics
T1  - Laser induced mixing in multilayered Ti/Ta thin film structures
VL  - 50
IS  - 6
SP  - 257
DO  - 10.1007/s11082-018-1525-x
ER  - 
@article{
author = "Obradović, Marko O. and Kovač, Janez and Petrović, Suzana and Lazović, Vladimir M. and Salatić, Branislav and Ciganović, Jovan and Pjević, Dejan J. and Milosavljević, Momir and Peruško, Davor",
year = "2018",
abstract = "The possibility of interlayer mixing in a Ti/Ta multilayer system, induced by laser irradiation, was the main purpose of these experiments. Ti/Ta multilayer system, consisting of ten alternating Ti and Ta thin films and covered by slightly thicker Ti layer, was deposited on Si (100) wafers to a total thickness of 205 nm. Laser irradiation was performed in air by picoseconds Nd:YAG laser pulses in defocused regime with fluences of 0.057 and 0.11 J cm−2. Laser beam was scanned over the 5 × 5 mm surface area with different steps along y-axes. Structural and compositional characterisation was done by auger electron spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy, and scanning electron microscopy. Laser processing at lower fluence caused only oxidation of the top Ti layer, despite of the number of applied laser pulses. Interlayer mixing was not observed. Application of laser pulses at fluence of 0.11 J cm−2caused partial and/or complete ablation of deposited layers. In partially ablated regions considerable mixing between Ti and Ta films was registered.",
journal = "Optical and Quantum Electronics",
title = "Laser induced mixing in multilayered Ti/Ta thin film structures",
volume = "50",
number = "6",
pages = "257",
doi = "10.1007/s11082-018-1525-x"
}
Obradović, M. O., Kovač, J., Petrović, S., Lazović, V. M., Salatić, B., Ciganović, J., Pjević, D. J., Milosavljević, M.,& Peruško, D.. (2018). Laser induced mixing in multilayered Ti/Ta thin film structures. in Optical and Quantum Electronics, 50(6), 257.
https://doi.org/10.1007/s11082-018-1525-x
Obradović MO, Kovač J, Petrović S, Lazović VM, Salatić B, Ciganović J, Pjević DJ, Milosavljević M, Peruško D. Laser induced mixing in multilayered Ti/Ta thin film structures. in Optical and Quantum Electronics. 2018;50(6):257.
doi:10.1007/s11082-018-1525-x .
Obradović, Marko O., Kovač, Janez, Petrović, Suzana, Lazović, Vladimir M., Salatić, Branislav, Ciganović, Jovan, Pjević, Dejan J., Milosavljević, Momir, Peruško, Davor, "Laser induced mixing in multilayered Ti/Ta thin film structures" in Optical and Quantum Electronics, 50, no. 6 (2018):257,
https://doi.org/10.1007/s11082-018-1525-x . .

Design of co-existence parallel periodic surface structure induced by picosecond laser pulses on the Al/Ti multilayers

Petrović, Suzana; Peruško, Davor; Kovač, Janez; Panjan, Peter; Mitrić, Miodrag; Pjević, Dejan J.; Kovacevic, A.; Jelenković, Branislav

(2017)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Kovač, Janez
AU  - Panjan, Peter
AU  - Mitrić, Miodrag
AU  - Pjević, Dejan J.
AU  - Kovacevic, A.
AU  - Jelenković, Branislav
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1746
AB  - Formation of periodic nanostructures on the Ti/5x(Al/Ti)/Si multilayers induced by picosecond laser pulses is studied in order to better understand the formation of a laser-induced periodic surface structure (LIPSS). At fluence slightly below the ablation threshold, the formation of low spatial frequency-LIPSS (LSFL) oriented perpendicular to the direction of the laser polarization is observed on the irradiated area. Prolonged irradiation while scanning results in the formation of a high spatial frequency-LIPSS (HSFL), on top of the LSFLs, creating a co-existence parallel periodic structure. HSFL was oriented parallel to the incident laser polarization. Intermixing between the Al and Ti layers with the formation of Al-Ti intermetallic compounds was achieved during the irradiation. The intermetallic region was formed mostly within the heat affected zone of the sample. Surface segregation of aluminium with partial ablation of the top layer of titanium was followed by the formation of an ultra-thin Al2O3 film on the surface of the multi-layered structure. Published by AIP Publishing.
T2  - Journal of Applied Physics
T1  - Design of co-existence parallel periodic surface structure induced by picosecond laser pulses on the Al/Ti multilayers
VL  - 122
IS  - 11
DO  - 10.1063/1.4985830
ER  - 
@article{
author = "Petrović, Suzana and Peruško, Davor and Kovač, Janez and Panjan, Peter and Mitrić, Miodrag and Pjević, Dejan J. and Kovacevic, A. and Jelenković, Branislav",
year = "2017",
abstract = "Formation of periodic nanostructures on the Ti/5x(Al/Ti)/Si multilayers induced by picosecond laser pulses is studied in order to better understand the formation of a laser-induced periodic surface structure (LIPSS). At fluence slightly below the ablation threshold, the formation of low spatial frequency-LIPSS (LSFL) oriented perpendicular to the direction of the laser polarization is observed on the irradiated area. Prolonged irradiation while scanning results in the formation of a high spatial frequency-LIPSS (HSFL), on top of the LSFLs, creating a co-existence parallel periodic structure. HSFL was oriented parallel to the incident laser polarization. Intermixing between the Al and Ti layers with the formation of Al-Ti intermetallic compounds was achieved during the irradiation. The intermetallic region was formed mostly within the heat affected zone of the sample. Surface segregation of aluminium with partial ablation of the top layer of titanium was followed by the formation of an ultra-thin Al2O3 film on the surface of the multi-layered structure. Published by AIP Publishing.",
journal = "Journal of Applied Physics",
title = "Design of co-existence parallel periodic surface structure induced by picosecond laser pulses on the Al/Ti multilayers",
volume = "122",
number = "11",
doi = "10.1063/1.4985830"
}
Petrović, S., Peruško, D., Kovač, J., Panjan, P., Mitrić, M., Pjević, D. J., Kovacevic, A.,& Jelenković, B.. (2017). Design of co-existence parallel periodic surface structure induced by picosecond laser pulses on the Al/Ti multilayers. in Journal of Applied Physics, 122(11).
https://doi.org/10.1063/1.4985830
Petrović S, Peruško D, Kovač J, Panjan P, Mitrić M, Pjević DJ, Kovacevic A, Jelenković B. Design of co-existence parallel periodic surface structure induced by picosecond laser pulses on the Al/Ti multilayers. in Journal of Applied Physics. 2017;122(11).
doi:10.1063/1.4985830 .
Petrović, Suzana, Peruško, Davor, Kovač, Janez, Panjan, Peter, Mitrić, Miodrag, Pjević, Dejan J., Kovacevic, A., Jelenković, Branislav, "Design of co-existence parallel periodic surface structure induced by picosecond laser pulses on the Al/Ti multilayers" in Journal of Applied Physics, 122, no. 11 (2017),
https://doi.org/10.1063/1.4985830 . .
1
2
2
2

Inducing subwavelength periodic nanostructures on multilayer NiPd thin film by low-fluence femtosecond laser beam

Kovacevic, Aleksander G.; Petrović, Suzana; Lazović, Vladimir M.; Peruško, Davor; Pantelić, Dejan; Jelenković, Branislav

(2017)

TY  - JOUR
AU  - Kovacevic, Aleksander G.
AU  - Petrović, Suzana
AU  - Lazović, Vladimir M.
AU  - Peruško, Davor
AU  - Pantelić, Dejan
AU  - Jelenković, Branislav
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7165
AB  - During femtosecond interaction with surfaces, the processes of liquid and solid-state dewetting could be responsible for the generation and regrouping of nanoparticles and nanoparticle clusters. The occurrence of surface plasmon polariton most probably induces the LIPSS arrangement. We have used low-fluence scanning femtosecond beam to generate sub-wavelength periodic structures on multilayer Ni/Pd thin films on Si. The spatial period of LIPSS increases with the change of scanning directions in respect to the polarization direction due to the phase difference increase between the incoming and induced oscillations. (c) 2017 Elsevier B.V. All rights reserved.
T2  - Applied Surface Science
T1  - Inducing subwavelength periodic nanostructures on multilayer NiPd thin film by low-fluence femtosecond laser beam
VL  - 417
SP  - 155
EP  - 159
DO  - 10.1016/j.apsusc.2017.03.141
ER  - 
@article{
author = "Kovacevic, Aleksander G. and Petrović, Suzana and Lazović, Vladimir M. and Peruško, Davor and Pantelić, Dejan and Jelenković, Branislav",
year = "2017",
abstract = "During femtosecond interaction with surfaces, the processes of liquid and solid-state dewetting could be responsible for the generation and regrouping of nanoparticles and nanoparticle clusters. The occurrence of surface plasmon polariton most probably induces the LIPSS arrangement. We have used low-fluence scanning femtosecond beam to generate sub-wavelength periodic structures on multilayer Ni/Pd thin films on Si. The spatial period of LIPSS increases with the change of scanning directions in respect to the polarization direction due to the phase difference increase between the incoming and induced oscillations. (c) 2017 Elsevier B.V. All rights reserved.",
journal = "Applied Surface Science",
title = "Inducing subwavelength periodic nanostructures on multilayer NiPd thin film by low-fluence femtosecond laser beam",
volume = "417",
pages = "155-159",
doi = "10.1016/j.apsusc.2017.03.141"
}
Kovacevic, A. G., Petrović, S., Lazović, V. M., Peruško, D., Pantelić, D.,& Jelenković, B.. (2017). Inducing subwavelength periodic nanostructures on multilayer NiPd thin film by low-fluence femtosecond laser beam. in Applied Surface Science, 417, 155-159.
https://doi.org/10.1016/j.apsusc.2017.03.141
Kovacevic AG, Petrović S, Lazović VM, Peruško D, Pantelić D, Jelenković B. Inducing subwavelength periodic nanostructures on multilayer NiPd thin film by low-fluence femtosecond laser beam. in Applied Surface Science. 2017;417:155-159.
doi:10.1016/j.apsusc.2017.03.141 .
Kovacevic, Aleksander G., Petrović, Suzana, Lazović, Vladimir M., Peruško, Davor, Pantelić, Dejan, Jelenković, Branislav, "Inducing subwavelength periodic nanostructures on multilayer NiPd thin film by low-fluence femtosecond laser beam" in Applied Surface Science, 417 (2017):155-159,
https://doi.org/10.1016/j.apsusc.2017.03.141 . .
3
3
3

Femtosecond laser processing of NiPd single and 5x(Ni/Pd) multilayer thin films

Petrović, Suzana; Gaković, Biljana M.; Zamfirescu, M.; Radu, C.; Peruško, Davor; Radak, Bojan; Ristoscu, Carmen; Zdravković, Slobodan; Luculescu, C. L.; Mihailescu, Ion N.

(2017)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Gaković, Biljana M.
AU  - Zamfirescu, M.
AU  - Radu, C.
AU  - Peruško, Davor
AU  - Radak, Bojan
AU  - Ristoscu, Carmen
AU  - Zdravković, Slobodan
AU  - Luculescu, C. L.
AU  - Mihailescu, Ion N.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7164
AB  - Modification of single and complex nickel-palladium samples by laser processing in the femtosecond time domain was studied. The samples were processed by focused Ti:Sapphire laser beam (Clark CPA-2101) with 775 nm laser wavelength, 2 kHz repetition rate, 200 fs pulse duration. The laser-induced morphological modifications have shown dependence on the applied fluences and number of laser pulses. The formed surface nanostructures on the single NiPd/Si and multilayer 5x(Ni/Pd)/Si systems are compared with individual Ni and Pd thin films. The results show an increase in surface roughness, formation of parallel periodic surface structures, appearance of hydrodynamic features and ablation of surface material. At low number of pulses (less than 10 pulses) and low pulse energies range (not over 1.7 mu J), the two types of laser-induced periodic surface structure (LIPSS) can be observed: low and high spatial frequency LIPSS (HSFL and LSFL). For all samples, the measured LSFL periods were 720 nm for the ripples created solely on thin film surfaces during the single pulse action. In the case of the multi-pulse irradiation, the periodicities of created LSFLs on the all investigated thin films have shown tendency to reduction with increasing of pulse energies. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Applied Surface Science
T1  - Femtosecond laser processing of NiPd single and 5x(Ni/Pd) multilayer thin films
VL  - 417
SP  - 16
EP  - 22
DO  - 10.1016/j.apsusc.2016.12.142
ER  - 
@article{
author = "Petrović, Suzana and Gaković, Biljana M. and Zamfirescu, M. and Radu, C. and Peruško, Davor and Radak, Bojan and Ristoscu, Carmen and Zdravković, Slobodan and Luculescu, C. L. and Mihailescu, Ion N.",
year = "2017",
abstract = "Modification of single and complex nickel-palladium samples by laser processing in the femtosecond time domain was studied. The samples were processed by focused Ti:Sapphire laser beam (Clark CPA-2101) with 775 nm laser wavelength, 2 kHz repetition rate, 200 fs pulse duration. The laser-induced morphological modifications have shown dependence on the applied fluences and number of laser pulses. The formed surface nanostructures on the single NiPd/Si and multilayer 5x(Ni/Pd)/Si systems are compared with individual Ni and Pd thin films. The results show an increase in surface roughness, formation of parallel periodic surface structures, appearance of hydrodynamic features and ablation of surface material. At low number of pulses (less than 10 pulses) and low pulse energies range (not over 1.7 mu J), the two types of laser-induced periodic surface structure (LIPSS) can be observed: low and high spatial frequency LIPSS (HSFL and LSFL). For all samples, the measured LSFL periods were 720 nm for the ripples created solely on thin film surfaces during the single pulse action. In the case of the multi-pulse irradiation, the periodicities of created LSFLs on the all investigated thin films have shown tendency to reduction with increasing of pulse energies. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Applied Surface Science",
title = "Femtosecond laser processing of NiPd single and 5x(Ni/Pd) multilayer thin films",
volume = "417",
pages = "16-22",
doi = "10.1016/j.apsusc.2016.12.142"
}
Petrović, S., Gaković, B. M., Zamfirescu, M., Radu, C., Peruško, D., Radak, B., Ristoscu, C., Zdravković, S., Luculescu, C. L.,& Mihailescu, I. N.. (2017). Femtosecond laser processing of NiPd single and 5x(Ni/Pd) multilayer thin films. in Applied Surface Science, 417, 16-22.
https://doi.org/10.1016/j.apsusc.2016.12.142
Petrović S, Gaković BM, Zamfirescu M, Radu C, Peruško D, Radak B, Ristoscu C, Zdravković S, Luculescu CL, Mihailescu IN. Femtosecond laser processing of NiPd single and 5x(Ni/Pd) multilayer thin films. in Applied Surface Science. 2017;417:16-22.
doi:10.1016/j.apsusc.2016.12.142 .
Petrović, Suzana, Gaković, Biljana M., Zamfirescu, M., Radu, C., Peruško, Davor, Radak, Bojan, Ristoscu, Carmen, Zdravković, Slobodan, Luculescu, C. L., Mihailescu, Ion N., "Femtosecond laser processing of NiPd single and 5x(Ni/Pd) multilayer thin films" in Applied Surface Science, 417 (2017):16-22,
https://doi.org/10.1016/j.apsusc.2016.12.142 . .
2
2
2

Selective Al-Ti reactivity in laser-processed Al/Ti multilayers

Peruško, Davor; Kovač, Janez; Petrović, Suzana; Obradović, Marko O.; Mitrić, Miodrag; Pavlović, Vladimir B.; Salatić, Branislav; Jaksa, G.; Ciganović, Jovan; Milosavljević, Momir

(2017)

TY  - JOUR
AU  - Peruško, Davor
AU  - Kovač, Janez
AU  - Petrović, Suzana
AU  - Obradović, Marko O.
AU  - Mitrić, Miodrag
AU  - Pavlović, Vladimir B.
AU  - Salatić, Branislav
AU  - Jaksa, G.
AU  - Ciganović, Jovan
AU  - Milosavljević, Momir
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1725
AB  - Multilayers consisting of five (Al/Ti) bilayers were deposited on (100) silicon wafers. On top was deposited the Ti layer, aimed at preventing Al from diffusing to the surface upon laser treatment. The total thickness of the thin-film structure was 200 nm. Laser irradiations with Nd:YAG picoseconds laser pulses in the defocused regime were performed in air. Laser beam energy was 4 mJ and laser spot diameter on the sample surface was 3 mm (fluence 0.057 J cm(-2)). The samples were treated with different numbers of laser pulses. Structural characterizations were performed by different analytical methods and nano-hardness was also measured. Laser processing induced layer intermixing, formation of titanium aluminides, oxidation of the surface titanium layer and enhanced surface roughness. Aluminum appears at the sample surface only for the highest density of laser irradiation. Laser processing induces increment of nano-hardness by approximately 20% and decrease of residual Youngs modulus for a few percentages from the starting value of the untreated samples. These results can be interesting toward achieving structures with a selective extent of Al-Ti reactivity in this multilayered system, within the development of biocompatible materials.
T2  - Materials and Manufacturing Processes
T1  - Selective Al-Ti reactivity in laser-processed Al/Ti multilayers
VL  - 32
IS  - 14
SP  - 1622
EP  - 1627
DO  - 10.1080/10426914.2017.1279299
ER  - 
@article{
author = "Peruško, Davor and Kovač, Janez and Petrović, Suzana and Obradović, Marko O. and Mitrić, Miodrag and Pavlović, Vladimir B. and Salatić, Branislav and Jaksa, G. and Ciganović, Jovan and Milosavljević, Momir",
year = "2017",
abstract = "Multilayers consisting of five (Al/Ti) bilayers were deposited on (100) silicon wafers. On top was deposited the Ti layer, aimed at preventing Al from diffusing to the surface upon laser treatment. The total thickness of the thin-film structure was 200 nm. Laser irradiations with Nd:YAG picoseconds laser pulses in the defocused regime were performed in air. Laser beam energy was 4 mJ and laser spot diameter on the sample surface was 3 mm (fluence 0.057 J cm(-2)). The samples were treated with different numbers of laser pulses. Structural characterizations were performed by different analytical methods and nano-hardness was also measured. Laser processing induced layer intermixing, formation of titanium aluminides, oxidation of the surface titanium layer and enhanced surface roughness. Aluminum appears at the sample surface only for the highest density of laser irradiation. Laser processing induces increment of nano-hardness by approximately 20% and decrease of residual Youngs modulus for a few percentages from the starting value of the untreated samples. These results can be interesting toward achieving structures with a selective extent of Al-Ti reactivity in this multilayered system, within the development of biocompatible materials.",
journal = "Materials and Manufacturing Processes",
title = "Selective Al-Ti reactivity in laser-processed Al/Ti multilayers",
volume = "32",
number = "14",
pages = "1622-1627",
doi = "10.1080/10426914.2017.1279299"
}
Peruško, D., Kovač, J., Petrović, S., Obradović, M. O., Mitrić, M., Pavlović, V. B., Salatić, B., Jaksa, G., Ciganović, J.,& Milosavljević, M.. (2017). Selective Al-Ti reactivity in laser-processed Al/Ti multilayers. in Materials and Manufacturing Processes, 32(14), 1622-1627.
https://doi.org/10.1080/10426914.2017.1279299
Peruško D, Kovač J, Petrović S, Obradović MO, Mitrić M, Pavlović VB, Salatić B, Jaksa G, Ciganović J, Milosavljević M. Selective Al-Ti reactivity in laser-processed Al/Ti multilayers. in Materials and Manufacturing Processes. 2017;32(14):1622-1627.
doi:10.1080/10426914.2017.1279299 .
Peruško, Davor, Kovač, Janez, Petrović, Suzana, Obradović, Marko O., Mitrić, Miodrag, Pavlović, Vladimir B., Salatić, Branislav, Jaksa, G., Ciganović, Jovan, Milosavljević, Momir, "Selective Al-Ti reactivity in laser-processed Al/Ti multilayers" in Materials and Manufacturing Processes, 32, no. 14 (2017):1622-1627,
https://doi.org/10.1080/10426914.2017.1279299 . .
2
2
2

Semi-transparent, conductive thin films of electrochemical exfoliated graphene

Marković, Zoran M.; Budimir, Milica; Kepić, Dejan P.; Holclajtner-Antunović, Ivanka D.; Marinović-Cincović, Milena; Dramićanin, Miroslav; Spasojević, Vojislav; Peruško, Davor; Špitalsky, Zdenko; Mičušik, Matej; Pavlović, Vladimir B.; Todorović-Marković, Biljana

(2016)

TY  - JOUR
AU  - Marković, Zoran M.
AU  - Budimir, Milica
AU  - Kepić, Dejan P.
AU  - Holclajtner-Antunović, Ivanka D.
AU  - Marinović-Cincović, Milena
AU  - Dramićanin, Miroslav
AU  - Spasojević, Vojislav
AU  - Peruško, Davor
AU  - Špitalsky, Zdenko
AU  - Mičušik, Matej
AU  - Pavlović, Vladimir B.
AU  - Todorović-Marković, Biljana
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1043
AB  - The electrochemical exfoliation of graphite to give one-atom-thick graphene with desirable properties is a green, cost-effective method for high-yield graphene production. This paper presents the results of electrochemical exfoliation of two different graphite precursors under an applied direct current voltage of +12 V. The used characterization techniques (elemental analysis, Fourier transform infrared spectroscopy, X-ray diffraction, X-photoelectron spectroscopy, Raman spectroscopy, field emission scanning electron microscopy and atomic force microscopy) showed that the exfoliated powder is highly functionalized with a low carbon/oxygen content that is similar to graphene oxide. The exfoliated graphene sheets dispersed in N,N-dimethylformamide were deposited on ano-discs by vacuum filtration and transferred to glass ceramic substrates. The thermal annealing of the as-deposited films at 600 degrees C for 30 minutes resulted in an increase in the carbon/oxygen ratio by more than 3 fold and a decrease in the sheet resistance by 25%. The lowest values for the sheet resistance of the annealed graphene thin films were in the range of 0.32 +/- 0.04 to 0.84 +/- 0.1 kohm sq(-1) depending on the graphite source that was used.
T2  - RSC Advances
T1  - Semi-transparent, conductive thin films of electrochemical exfoliated graphene
VL  - 6
IS  - 45
SP  - 39275
EP  - 39283
DO  - 10.1039/c6ra04250c
ER  - 
@article{
author = "Marković, Zoran M. and Budimir, Milica and Kepić, Dejan P. and Holclajtner-Antunović, Ivanka D. and Marinović-Cincović, Milena and Dramićanin, Miroslav and Spasojević, Vojislav and Peruško, Davor and Špitalsky, Zdenko and Mičušik, Matej and Pavlović, Vladimir B. and Todorović-Marković, Biljana",
year = "2016",
abstract = "The electrochemical exfoliation of graphite to give one-atom-thick graphene with desirable properties is a green, cost-effective method for high-yield graphene production. This paper presents the results of electrochemical exfoliation of two different graphite precursors under an applied direct current voltage of +12 V. The used characterization techniques (elemental analysis, Fourier transform infrared spectroscopy, X-ray diffraction, X-photoelectron spectroscopy, Raman spectroscopy, field emission scanning electron microscopy and atomic force microscopy) showed that the exfoliated powder is highly functionalized with a low carbon/oxygen content that is similar to graphene oxide. The exfoliated graphene sheets dispersed in N,N-dimethylformamide were deposited on ano-discs by vacuum filtration and transferred to glass ceramic substrates. The thermal annealing of the as-deposited films at 600 degrees C for 30 minutes resulted in an increase in the carbon/oxygen ratio by more than 3 fold and a decrease in the sheet resistance by 25%. The lowest values for the sheet resistance of the annealed graphene thin films were in the range of 0.32 +/- 0.04 to 0.84 +/- 0.1 kohm sq(-1) depending on the graphite source that was used.",
journal = "RSC Advances",
title = "Semi-transparent, conductive thin films of electrochemical exfoliated graphene",
volume = "6",
number = "45",
pages = "39275-39283",
doi = "10.1039/c6ra04250c"
}
Marković, Z. M., Budimir, M., Kepić, D. P., Holclajtner-Antunović, I. D., Marinović-Cincović, M., Dramićanin, M., Spasojević, V., Peruško, D., Špitalsky, Z., Mičušik, M., Pavlović, V. B.,& Todorović-Marković, B.. (2016). Semi-transparent, conductive thin films of electrochemical exfoliated graphene. in RSC Advances, 6(45), 39275-39283.
https://doi.org/10.1039/c6ra04250c
Marković ZM, Budimir M, Kepić DP, Holclajtner-Antunović ID, Marinović-Cincović M, Dramićanin M, Spasojević V, Peruško D, Špitalsky Z, Mičušik M, Pavlović VB, Todorović-Marković B. Semi-transparent, conductive thin films of electrochemical exfoliated graphene. in RSC Advances. 2016;6(45):39275-39283.
doi:10.1039/c6ra04250c .
Marković, Zoran M., Budimir, Milica, Kepić, Dejan P., Holclajtner-Antunović, Ivanka D., Marinović-Cincović, Milena, Dramićanin, Miroslav, Spasojević, Vojislav, Peruško, Davor, Špitalsky, Zdenko, Mičušik, Matej, Pavlović, Vladimir B., Todorović-Marković, Biljana, "Semi-transparent, conductive thin films of electrochemical exfoliated graphene" in RSC Advances, 6, no. 45 (2016):39275-39283,
https://doi.org/10.1039/c6ra04250c . .
17
15
17

Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system

Salatić, Branislav; Petrović, Suzana; Peruško, Davor; Čekada, Miha; Panjan, Peter; Pantelić, Dejan; Jelenković, Branislav

(Elsevier, 2016)

TY  - JOUR
AU  - Salatić, Branislav
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Čekada, Miha
AU  - Panjan, Peter
AU  - Pantelić, Dejan
AU  - Jelenković, Branislav
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/858
AB  - The surface morphology of the ablation craters created in the multilayer 10x(Al/Ti)/Si system by nanosecond laser pulses at single- and dual wavelength has been studied experimentally and numerically. A complex multilayer thin film including ten (Al/Ti) bilayers deposited by ion sputtering on Si(1 0 0) substrate to a total thickness of 260 nm were illuminated at different laser irradiance in the range 0.25-3.5 x 10(9)W cm(-2). Single pulse laser irradiation was done at normal incidence in air, with the single wavelength, either at 532 nm or 1064 nm or with both laser light simultaneously in the ratio of 1: 10 for energy per pulse between second harmonic and 1064 nm. Most of the absorbed laser energy was rapidly transformed into heat, producing intensive modifications of composition and morphology on the sample surface. The results show an increase in surface roughness, formation of specific nanostructures, appearance of hydrodynamic features and ablation of surface material with crater formation. Applying a small fraction (10%) of the second harmonic in dual-wavelength pulses, a modification of the 10x(Al/Ti)/Si system by a single laser pulse was reflected in the formation of wider and/or deeper craters. Numerical calculations show that the main physical mechanism in ablation process is normal evaporation without phase explosion. The calculated and experimental results agree relatively well for the whole irradiance range, what makes the model applicable to complex Al/Ti multilayer systems. (C) 2015 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Applied Surface Science
T1  - Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system
VL  - 360
SP  - 559
EP  - 565
DO  - 10.1016/j.apsusc.2015.10.203
ER  - 
@article{
author = "Salatić, Branislav and Petrović, Suzana and Peruško, Davor and Čekada, Miha and Panjan, Peter and Pantelić, Dejan and Jelenković, Branislav",
year = "2016",
abstract = "The surface morphology of the ablation craters created in the multilayer 10x(Al/Ti)/Si system by nanosecond laser pulses at single- and dual wavelength has been studied experimentally and numerically. A complex multilayer thin film including ten (Al/Ti) bilayers deposited by ion sputtering on Si(1 0 0) substrate to a total thickness of 260 nm were illuminated at different laser irradiance in the range 0.25-3.5 x 10(9)W cm(-2). Single pulse laser irradiation was done at normal incidence in air, with the single wavelength, either at 532 nm or 1064 nm or with both laser light simultaneously in the ratio of 1: 10 for energy per pulse between second harmonic and 1064 nm. Most of the absorbed laser energy was rapidly transformed into heat, producing intensive modifications of composition and morphology on the sample surface. The results show an increase in surface roughness, formation of specific nanostructures, appearance of hydrodynamic features and ablation of surface material with crater formation. Applying a small fraction (10%) of the second harmonic in dual-wavelength pulses, a modification of the 10x(Al/Ti)/Si system by a single laser pulse was reflected in the formation of wider and/or deeper craters. Numerical calculations show that the main physical mechanism in ablation process is normal evaporation without phase explosion. The calculated and experimental results agree relatively well for the whole irradiance range, what makes the model applicable to complex Al/Ti multilayer systems. (C) 2015 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Applied Surface Science",
title = "Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system",
volume = "360",
pages = "559-565",
doi = "10.1016/j.apsusc.2015.10.203"
}
Salatić, B., Petrović, S., Peruško, D., Čekada, M., Panjan, P., Pantelić, D.,& Jelenković, B.. (2016). Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system. in Applied Surface Science
Elsevier., 360, 559-565.
https://doi.org/10.1016/j.apsusc.2015.10.203
Salatić B, Petrović S, Peruško D, Čekada M, Panjan P, Pantelić D, Jelenković B. Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system. in Applied Surface Science. 2016;360:559-565.
doi:10.1016/j.apsusc.2015.10.203 .
Salatić, Branislav, Petrović, Suzana, Peruško, Davor, Čekada, Miha, Panjan, Peter, Pantelić, Dejan, Jelenković, Branislav, "Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system" in Applied Surface Science, 360 (2016):559-565,
https://doi.org/10.1016/j.apsusc.2015.10.203 . .
3
2
3

Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths

Salatić, Branislav; Petrović, Suzana; Peruško, Davor; Čekada, Miha; Jelenković, Branislav; Pantelić, Dejan

(2016)

TY  - JOUR
AU  - Salatić, Branislav
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Čekada, Miha
AU  - Jelenković, Branislav
AU  - Pantelić, Dejan
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1108
AB  - A study of the effects of laser irradiation on the morphology and composition of Ni/Ti multilayers induced by nanosecond laser pulses at different wavelengths is reported. Irradiation of complex 109(Ni/Ti)/Si sample was done by a Nd:YAG laser which operate at a 1064 nm wavelength, frequency doubled wavelength (532 nm) and dual-wavelength (1064 and 532 nm). The following surface morphological changes were observed: (1) ablation of the thin film during the first laser pulse and (2) appearance of some nanostructures (mosaic structure) in the irradiated region. After action of one pulse, the boundary of damage area was relatively sharp at low pulse energy, whereas it was diffuse after irradiation with higher energy per pulse. The results obtained show that laser irradiation induced mixing between Ni and Ti layers which creates conditions for the formation of intermetallic compounds. A numerical model was used to predict ablation depths and temperatures inside the material during the time. The model prediction shows a close agreement with experimental data.
T2  - Optical and Quantum Electronics
T1  - Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths
VL  - 48
IS  - 6
DO  - 10.1007/s11082-016-0503-4
ER  - 
@article{
author = "Salatić, Branislav and Petrović, Suzana and Peruško, Davor and Čekada, Miha and Jelenković, Branislav and Pantelić, Dejan",
year = "2016",
abstract = "A study of the effects of laser irradiation on the morphology and composition of Ni/Ti multilayers induced by nanosecond laser pulses at different wavelengths is reported. Irradiation of complex 109(Ni/Ti)/Si sample was done by a Nd:YAG laser which operate at a 1064 nm wavelength, frequency doubled wavelength (532 nm) and dual-wavelength (1064 and 532 nm). The following surface morphological changes were observed: (1) ablation of the thin film during the first laser pulse and (2) appearance of some nanostructures (mosaic structure) in the irradiated region. After action of one pulse, the boundary of damage area was relatively sharp at low pulse energy, whereas it was diffuse after irradiation with higher energy per pulse. The results obtained show that laser irradiation induced mixing between Ni and Ti layers which creates conditions for the formation of intermetallic compounds. A numerical model was used to predict ablation depths and temperatures inside the material during the time. The model prediction shows a close agreement with experimental data.",
journal = "Optical and Quantum Electronics",
title = "Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths",
volume = "48",
number = "6",
doi = "10.1007/s11082-016-0503-4"
}
Salatić, B., Petrović, S., Peruško, D., Čekada, M., Jelenković, B.,& Pantelić, D.. (2016). Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths. in Optical and Quantum Electronics, 48(6).
https://doi.org/10.1007/s11082-016-0503-4
Salatić B, Petrović S, Peruško D, Čekada M, Jelenković B, Pantelić D. Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths. in Optical and Quantum Electronics. 2016;48(6).
doi:10.1007/s11082-016-0503-4 .
Salatić, Branislav, Petrović, Suzana, Peruško, Davor, Čekada, Miha, Jelenković, Branislav, Pantelić, Dejan, "Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths" in Optical and Quantum Electronics, 48, no. 6 (2016),
https://doi.org/10.1007/s11082-016-0503-4 . .
1
1
1

Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution

Petrović, Suzana; Milovanović, Dubravka S.; Salatić, Branislav; Peruško, Davor; Kovač, Janez; Dražić, Goran; Mitrić, Miodrag; Trtica, Milan; Jelenković, Branislav

(Elsevier, 2015)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Milovanović, Dubravka S.
AU  - Salatić, Branislav
AU  - Peruško, Davor
AU  - Kovač, Janez
AU  - Dražić, Goran
AU  - Mitrić, Miodrag
AU  - Trtica, Milan
AU  - Jelenković, Branislav
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/807
AB  - Bimetallic NiAu and complex NiO:Au nanoparticles were formed by laser ablation of Ni target immersed in the colloidal gold solution. Effect of laser parameters (pulse duration, fluences and ablation times) on size and composition of nanoparticles was investigated by ablating the target with two Nd:YAG lasers at 1064 nm, operating with different pulse durations, 150 ps and 20 ns. Stronger ablation of the Ni target and subsequient synthesis of nanoparticles is achieved with picosecond pulses, compared to the nanoparticles production with nanosecond pulses, because the former ablation induces activation of different reactions between species in the colloidal solution. Shape, size and composition of the synthesized nanopraticles were found to correlate with the concentration of Ni species in the colloidal solution. Higher Ni concentration leads to formation of larger NiAu nanoparticles in form of solid solution. Smaller nanoparticles with lower Ni concentration in the colloidal solution were achieved by their synthesis during nanosecond pulses, when the obtained distribution of composition corresponds to the NiO matrix with incorporated golden nanoparticles. The results also demonstrate that the formation of bimetallic NiAu and complex NiO:Au nanoparticles were possible by means of laser ablation in liquids. (C) 2015 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution
VL  - 166
SP  - 223
EP  - 232
DO  - 10.1016/j.matchemphys.2015.10.007
ER  - 
@article{
author = "Petrović, Suzana and Milovanović, Dubravka S. and Salatić, Branislav and Peruško, Davor and Kovač, Janez and Dražić, Goran and Mitrić, Miodrag and Trtica, Milan and Jelenković, Branislav",
year = "2015",
abstract = "Bimetallic NiAu and complex NiO:Au nanoparticles were formed by laser ablation of Ni target immersed in the colloidal gold solution. Effect of laser parameters (pulse duration, fluences and ablation times) on size and composition of nanoparticles was investigated by ablating the target with two Nd:YAG lasers at 1064 nm, operating with different pulse durations, 150 ps and 20 ns. Stronger ablation of the Ni target and subsequient synthesis of nanoparticles is achieved with picosecond pulses, compared to the nanoparticles production with nanosecond pulses, because the former ablation induces activation of different reactions between species in the colloidal solution. Shape, size and composition of the synthesized nanopraticles were found to correlate with the concentration of Ni species in the colloidal solution. Higher Ni concentration leads to formation of larger NiAu nanoparticles in form of solid solution. Smaller nanoparticles with lower Ni concentration in the colloidal solution were achieved by their synthesis during nanosecond pulses, when the obtained distribution of composition corresponds to the NiO matrix with incorporated golden nanoparticles. The results also demonstrate that the formation of bimetallic NiAu and complex NiO:Au nanoparticles were possible by means of laser ablation in liquids. (C) 2015 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution",
volume = "166",
pages = "223-232",
doi = "10.1016/j.matchemphys.2015.10.007"
}
Petrović, S., Milovanović, D. S., Salatić, B., Peruško, D., Kovač, J., Dražić, G., Mitrić, M., Trtica, M.,& Jelenković, B.. (2015). Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution. in Materials Chemistry and Physics
Elsevier., 166, 223-232.
https://doi.org/10.1016/j.matchemphys.2015.10.007
Petrović S, Milovanović DS, Salatić B, Peruško D, Kovač J, Dražić G, Mitrić M, Trtica M, Jelenković B. Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution. in Materials Chemistry and Physics. 2015;166:223-232.
doi:10.1016/j.matchemphys.2015.10.007 .
Petrović, Suzana, Milovanović, Dubravka S., Salatić, Branislav, Peruško, Davor, Kovač, Janez, Dražić, Goran, Mitrić, Miodrag, Trtica, Milan, Jelenković, Branislav, "Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution" in Materials Chemistry and Physics, 166 (2015):223-232,
https://doi.org/10.1016/j.matchemphys.2015.10.007 . .
7
7
6

The effect of annealing temperature and time on synthesis of graphene thin films by rapid thermal annealing

Prekodravac, Jovana; Marković, Zoran M.; Jovanović, Svetlana P.; Budimir, Milica; Peruško, Davor; Holclajtner-Antunović, Ivanka D.; Pavlović, Vladimir B.; Syrgiannis, Zois; Bonasera, Aurelio; Todorović-Marković, Biljana

(2015)

TY  - JOUR
AU  - Prekodravac, Jovana
AU  - Marković, Zoran M.
AU  - Jovanović, Svetlana P.
AU  - Budimir, Milica
AU  - Peruško, Davor
AU  - Holclajtner-Antunović, Ivanka D.
AU  - Pavlović, Vladimir B.
AU  - Syrgiannis, Zois
AU  - Bonasera, Aurelio
AU  - Todorović-Marković, Biljana
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/797
AB  - In this paper, we performed synthesis of graphene thin films by rapid thermal annealing (RTA) of thin nickel copper (Ni/Cu) layers deposited on spectroscopic graphite as a carbon source. Furthermore, we investigated the effect of annealing temperature and annealing time on formation and quality of synthesized graphene films. Raman spectroscopy study showed that annealing at lower temperatures results in formation of monolayer graphene films, while annealing at higher temperatures results in formation of multilayer graphene films. We used Raman mapping to determine the distribution of graphene sheets. Surface morphology of graphene thin films was investigated by atomic force microscopy and scanning electron microscopy with EDS probe. (C) 2015 Elsevier B.V. All rights reserved.
T2  - Synthetic Metals
T1  - The effect of annealing temperature and time on synthesis of graphene thin films by rapid thermal annealing
VL  - 209
SP  - 461
EP  - 467
DO  - 10.1016/j.synthmet.2015.08.015
ER  - 
@article{
author = "Prekodravac, Jovana and Marković, Zoran M. and Jovanović, Svetlana P. and Budimir, Milica and Peruško, Davor and Holclajtner-Antunović, Ivanka D. and Pavlović, Vladimir B. and Syrgiannis, Zois and Bonasera, Aurelio and Todorović-Marković, Biljana",
year = "2015",
abstract = "In this paper, we performed synthesis of graphene thin films by rapid thermal annealing (RTA) of thin nickel copper (Ni/Cu) layers deposited on spectroscopic graphite as a carbon source. Furthermore, we investigated the effect of annealing temperature and annealing time on formation and quality of synthesized graphene films. Raman spectroscopy study showed that annealing at lower temperatures results in formation of monolayer graphene films, while annealing at higher temperatures results in formation of multilayer graphene films. We used Raman mapping to determine the distribution of graphene sheets. Surface morphology of graphene thin films was investigated by atomic force microscopy and scanning electron microscopy with EDS probe. (C) 2015 Elsevier B.V. All rights reserved.",
journal = "Synthetic Metals",
title = "The effect of annealing temperature and time on synthesis of graphene thin films by rapid thermal annealing",
volume = "209",
pages = "461-467",
doi = "10.1016/j.synthmet.2015.08.015"
}
Prekodravac, J., Marković, Z. M., Jovanović, S. P., Budimir, M., Peruško, D., Holclajtner-Antunović, I. D., Pavlović, V. B., Syrgiannis, Z., Bonasera, A.,& Todorović-Marković, B.. (2015). The effect of annealing temperature and time on synthesis of graphene thin films by rapid thermal annealing. in Synthetic Metals, 209, 461-467.
https://doi.org/10.1016/j.synthmet.2015.08.015
Prekodravac J, Marković ZM, Jovanović SP, Budimir M, Peruško D, Holclajtner-Antunović ID, Pavlović VB, Syrgiannis Z, Bonasera A, Todorović-Marković B. The effect of annealing temperature and time on synthesis of graphene thin films by rapid thermal annealing. in Synthetic Metals. 2015;209:461-467.
doi:10.1016/j.synthmet.2015.08.015 .
Prekodravac, Jovana, Marković, Zoran M., Jovanović, Svetlana P., Budimir, Milica, Peruško, Davor, Holclajtner-Antunović, Ivanka D., Pavlović, Vladimir B., Syrgiannis, Zois, Bonasera, Aurelio, Todorović-Marković, Biljana, "The effect of annealing temperature and time on synthesis of graphene thin films by rapid thermal annealing" in Synthetic Metals, 209 (2015):461-467,
https://doi.org/10.1016/j.synthmet.2015.08.015 . .
11
9
9

Intermixing and phase transformations in Al/Ti multilayer system induced by picosecond laser beam

Peruško, Davor; Kovač, Janez; Petrović, Suzana; Dražić, Goran; Mitrić, Miodrag; Milosavljević, Momir; Ciganović, Jovan

(2015)

TY  - JOUR
AU  - Peruško, Davor
AU  - Kovač, Janez
AU  - Petrović, Suzana
AU  - Dražić, Goran
AU  - Mitrić, Miodrag
AU  - Milosavljević, Momir
AU  - Ciganović, Jovan
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7080
AB  - Multilayer structures, consisting of 15 alternate Ti and Al thin films, and covered with thicker Ti layer, were deposited on a Si substrate to a total thickness of 900 nm. Laser treatment was performed in air by defocused Nd:YAG laser pulses (150 ps) with energies of 7 and 10 mJ covering an area of 3 mm in diameter (fluences were 0.1 and 0.14 J cm(-2) respectively). Laser beam was scanned over the 5 x 5 mm surface area. Characterizations were done by Auger electron spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, atomic force microscopy and transmission electron microscopy. Nano-hardness measurements were performed by Vickers method with applied load of 5 mN. Obtained results show that irradiation with picosecond laser pulses leads to the formation of Ti2O3 in the top Ti layer. This process is more pronounced for higher energy and/or higher number of applied laser pulses. On the surface of all samples very thin amorphous TiO2 layer was formed. Laser irradiation induces surface melting and transformation of relatively flat surface into mosaic shaped one for samples treated with higher energy and higher number of applied laser pulses. Irradiation at smaller energy did not induce any noticeably mixing between Al and Ti beneath the covered Ti layer. Some mixing of Al and Ti appeared in the sample irradiated with higher energy of laser pulses. (C) 2015 Elsevier B.V. All rights reserved.
T2  - Thin Solid Films
T1  - Intermixing and phase transformations in Al/Ti multilayer system induced by picosecond laser beam
VL  - 591
SP  - 357
EP  - 362
DO  - 10.1016/j.tsf.2015.03.030
ER  - 
@article{
author = "Peruško, Davor and Kovač, Janez and Petrović, Suzana and Dražić, Goran and Mitrić, Miodrag and Milosavljević, Momir and Ciganović, Jovan",
year = "2015",
abstract = "Multilayer structures, consisting of 15 alternate Ti and Al thin films, and covered with thicker Ti layer, were deposited on a Si substrate to a total thickness of 900 nm. Laser treatment was performed in air by defocused Nd:YAG laser pulses (150 ps) with energies of 7 and 10 mJ covering an area of 3 mm in diameter (fluences were 0.1 and 0.14 J cm(-2) respectively). Laser beam was scanned over the 5 x 5 mm surface area. Characterizations were done by Auger electron spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, atomic force microscopy and transmission electron microscopy. Nano-hardness measurements were performed by Vickers method with applied load of 5 mN. Obtained results show that irradiation with picosecond laser pulses leads to the formation of Ti2O3 in the top Ti layer. This process is more pronounced for higher energy and/or higher number of applied laser pulses. On the surface of all samples very thin amorphous TiO2 layer was formed. Laser irradiation induces surface melting and transformation of relatively flat surface into mosaic shaped one for samples treated with higher energy and higher number of applied laser pulses. Irradiation at smaller energy did not induce any noticeably mixing between Al and Ti beneath the covered Ti layer. Some mixing of Al and Ti appeared in the sample irradiated with higher energy of laser pulses. (C) 2015 Elsevier B.V. All rights reserved.",
journal = "Thin Solid Films",
title = "Intermixing and phase transformations in Al/Ti multilayer system induced by picosecond laser beam",
volume = "591",
pages = "357-362",
doi = "10.1016/j.tsf.2015.03.030"
}
Peruško, D., Kovač, J., Petrović, S., Dražić, G., Mitrić, M., Milosavljević, M.,& Ciganović, J.. (2015). Intermixing and phase transformations in Al/Ti multilayer system induced by picosecond laser beam. in Thin Solid Films, 591, 357-362.
https://doi.org/10.1016/j.tsf.2015.03.030
Peruško D, Kovač J, Petrović S, Dražić G, Mitrić M, Milosavljević M, Ciganović J. Intermixing and phase transformations in Al/Ti multilayer system induced by picosecond laser beam. in Thin Solid Films. 2015;591:357-362.
doi:10.1016/j.tsf.2015.03.030 .
Peruško, Davor, Kovač, Janez, Petrović, Suzana, Dražić, Goran, Mitrić, Miodrag, Milosavljević, Momir, Ciganović, Jovan, "Intermixing and phase transformations in Al/Ti multilayer system induced by picosecond laser beam" in Thin Solid Films, 591 (2015):357-362,
https://doi.org/10.1016/j.tsf.2015.03.030 . .
6
5
7

Effects of helium ion irradiation on bubble formation in AlN/TiN multilayered system

Obradović, Marko O.; Pjević, Dejan J.; Peruško, Davor; Grce, Ana; Milosavljević, Momir; Homewood, Kevin P.; Siketic, Z.

(2015)

TY  - JOUR
AU  - Obradović, Marko O.
AU  - Pjević, Dejan J.
AU  - Peruško, Davor
AU  - Grce, Ana
AU  - Milosavljević, Momir
AU  - Homewood, Kevin P.
AU  - Siketic, Z.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7078
AB  - The effects of helium ion irradiation on immiscible AlN/TiN multilayered system were studied. The structure consisted of 30 alternate AlN (similar to 8 nm) and TiN (similar to 9.3 nm) layers of a total thickness around 260 nm, deposited on (100) Si substrates by reactive sputtering. The system was then implanted with 30 keV He+ to very high irradiation doses, 1-4 x 10(17) ions/cm(2). Evaluated projected ion range was 153.1 +/- 45.4 nm and maximum displacements per atom for the applied doses from 6 to 24. It was found that the multilayers remained well separated and stable after irradiation to 1 x 10(17) ions/cm(2), which introduces up to 10 at.% of He within the structure. The main effects were agglomeration of He bubbles around the projected ion range, mostly concentrated at the AlN edges of the interfaces, and a slight increase of the mean grain size within the affected zone. Increasing of the ion dose induced further agglomeration of bubbles, splitting of the layers at the interfaces, and final destruction of the structure. The evaluated He content was consistent with the implanted dose up to 2 x 10(17) ions/cm(2). For the highest dose the implanted gas is partially released from the structure. The results can be interesting towards the development of radiation tolerant materials. (C) 2015 Elsevier B.V. All rights reserved.
T2  - Thin Solid Films
T1  - Effects of helium ion irradiation on bubble formation in AlN/TiN multilayered system
VL  - 591
SP  - 164
EP  - 168
DO  - 10.1016/j.tsf.2015.03.074
ER  - 
@article{
author = "Obradović, Marko O. and Pjević, Dejan J. and Peruško, Davor and Grce, Ana and Milosavljević, Momir and Homewood, Kevin P. and Siketic, Z.",
year = "2015",
abstract = "The effects of helium ion irradiation on immiscible AlN/TiN multilayered system were studied. The structure consisted of 30 alternate AlN (similar to 8 nm) and TiN (similar to 9.3 nm) layers of a total thickness around 260 nm, deposited on (100) Si substrates by reactive sputtering. The system was then implanted with 30 keV He+ to very high irradiation doses, 1-4 x 10(17) ions/cm(2). Evaluated projected ion range was 153.1 +/- 45.4 nm and maximum displacements per atom for the applied doses from 6 to 24. It was found that the multilayers remained well separated and stable after irradiation to 1 x 10(17) ions/cm(2), which introduces up to 10 at.% of He within the structure. The main effects were agglomeration of He bubbles around the projected ion range, mostly concentrated at the AlN edges of the interfaces, and a slight increase of the mean grain size within the affected zone. Increasing of the ion dose induced further agglomeration of bubbles, splitting of the layers at the interfaces, and final destruction of the structure. The evaluated He content was consistent with the implanted dose up to 2 x 10(17) ions/cm(2). For the highest dose the implanted gas is partially released from the structure. The results can be interesting towards the development of radiation tolerant materials. (C) 2015 Elsevier B.V. All rights reserved.",
journal = "Thin Solid Films",
title = "Effects of helium ion irradiation on bubble formation in AlN/TiN multilayered system",
volume = "591",
pages = "164-168",
doi = "10.1016/j.tsf.2015.03.074"
}
Obradović, M. O., Pjević, D. J., Peruško, D., Grce, A., Milosavljević, M., Homewood, K. P.,& Siketic, Z.. (2015). Effects of helium ion irradiation on bubble formation in AlN/TiN multilayered system. in Thin Solid Films, 591, 164-168.
https://doi.org/10.1016/j.tsf.2015.03.074
Obradović MO, Pjević DJ, Peruško D, Grce A, Milosavljević M, Homewood KP, Siketic Z. Effects of helium ion irradiation on bubble formation in AlN/TiN multilayered system. in Thin Solid Films. 2015;591:164-168.
doi:10.1016/j.tsf.2015.03.074 .
Obradović, Marko O., Pjević, Dejan J., Peruško, Davor, Grce, Ana, Milosavljević, Momir, Homewood, Kevin P., Siketic, Z., "Effects of helium ion irradiation on bubble formation in AlN/TiN multilayered system" in Thin Solid Films, 591 (2015):164-168,
https://doi.org/10.1016/j.tsf.2015.03.074 . .
15
14
16

Monolayer graphene films through nickel catalyzed transformation of fullerol and graphene quantum dots: a Raman spectroscopy study

Prekodravac, Jovana; Jovanović, Svetlana P.; Holclajtner-Antunović, Ivanka D.; Peruško, Davor; Pavlović, Vladimir B.; Tošić, Dragana; Todorović-Marković, Biljana; Marković, Zoran M.

(2014)

TY  - JOUR
AU  - Prekodravac, Jovana
AU  - Jovanović, Svetlana P.
AU  - Holclajtner-Antunović, Ivanka D.
AU  - Peruško, Davor
AU  - Pavlović, Vladimir B.
AU  - Tošić, Dragana
AU  - Todorović-Marković, Biljana
AU  - Marković, Zoran M.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7063
AB  - In this paper we present synthesis of monolayer graphene islands. These films are deposited through nickel catalyzed transformation of fullerol and graphene quantum dots. Carbon doped nickel films are produced by autocatalytic chemical deposition. Upon rapid thermal annealing, graphene films are formed. Different characterization techniques are applied: Raman spectroscopy, scanning electron and atomic force microscopy. Raman spectroscopy analysis confirmed the formation of monolayer graphene films. Microscopy analysis revealed formation of monolayer islands.
T2  - Physica Scripta
T1  - Monolayer graphene films through nickel catalyzed transformation of fullerol and graphene quantum dots: a Raman spectroscopy study
VL  - T162
DO  - 10.1088/0031-8949/2014/T162/014030
ER  - 
@article{
author = "Prekodravac, Jovana and Jovanović, Svetlana P. and Holclajtner-Antunović, Ivanka D. and Peruško, Davor and Pavlović, Vladimir B. and Tošić, Dragana and Todorović-Marković, Biljana and Marković, Zoran M.",
year = "2014",
abstract = "In this paper we present synthesis of monolayer graphene islands. These films are deposited through nickel catalyzed transformation of fullerol and graphene quantum dots. Carbon doped nickel films are produced by autocatalytic chemical deposition. Upon rapid thermal annealing, graphene films are formed. Different characterization techniques are applied: Raman spectroscopy, scanning electron and atomic force microscopy. Raman spectroscopy analysis confirmed the formation of monolayer graphene films. Microscopy analysis revealed formation of monolayer islands.",
journal = "Physica Scripta",
title = "Monolayer graphene films through nickel catalyzed transformation of fullerol and graphene quantum dots: a Raman spectroscopy study",
volume = "T162",
doi = "10.1088/0031-8949/2014/T162/014030"
}
Prekodravac, J., Jovanović, S. P., Holclajtner-Antunović, I. D., Peruško, D., Pavlović, V. B., Tošić, D., Todorović-Marković, B.,& Marković, Z. M.. (2014). Monolayer graphene films through nickel catalyzed transformation of fullerol and graphene quantum dots: a Raman spectroscopy study. in Physica Scripta, T162.
https://doi.org/10.1088/0031-8949/2014/T162/014030
Prekodravac J, Jovanović SP, Holclajtner-Antunović ID, Peruško D, Pavlović VB, Tošić D, Todorović-Marković B, Marković ZM. Monolayer graphene films through nickel catalyzed transformation of fullerol and graphene quantum dots: a Raman spectroscopy study. in Physica Scripta. 2014;T162.
doi:10.1088/0031-8949/2014/T162/014030 .
Prekodravac, Jovana, Jovanović, Svetlana P., Holclajtner-Antunović, Ivanka D., Peruško, Davor, Pavlović, Vladimir B., Tošić, Dragana, Todorović-Marković, Biljana, Marković, Zoran M., "Monolayer graphene films through nickel catalyzed transformation of fullerol and graphene quantum dots: a Raman spectroscopy study" in Physica Scripta, T162 (2014),
https://doi.org/10.1088/0031-8949/2014/T162/014030 . .
2
9
6
11

Preparation of PEDOT:PSS thin films doped with graphene and graphene quantum dots

Kepić, Dejan P.; Marković, Zoran M.; Jovanović, Svetlana P.; Peruško, Davor; Budimir, Milica; Holclajtner-Antunović, Ivanka D.; Pavlović, Vladimir B.; Todorović-Marković, Biljana

(2014)

TY  - JOUR
AU  - Kepić, Dejan P.
AU  - Marković, Zoran M.
AU  - Jovanović, Svetlana P.
AU  - Peruško, Davor
AU  - Budimir, Milica
AU  - Holclajtner-Antunović, Ivanka D.
AU  - Pavlović, Vladimir B.
AU  - Todorović-Marković, Biljana
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/305
AB  - Enhanced conductivity, transparency and stability are the most important factors to consider in order to prepare electrodes for optoelectronic devices. In this paper, we investigated the properties of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films doped with graphene and graphene quantum dots. Samples were deposited by spin-coating onto glass substrates. Thin films were characterized by UV-vis and Raman spectroscopy, atomic force microscopy (AFM), scanning electron microscopy (SEM) and four-point probe measurements. It was found that both graphene and graphene quantum dots improve the conductivity of PEDOT:PSS films with only small decrease in transparency. AFM and SEM analysis showed homogenous distribution of spherical nanoparticles of graphene quantum dots and irregular shaped nanoparticles of graphene in PEDOT:PSS. (C) 2014 Elsevier B.V. All rights reserved.
T2  - Synthetic Metals
T1  - Preparation of PEDOT:PSS thin films doped with graphene and graphene quantum dots
VL  - 198
SP  - 150
EP  - 154
DO  - 10.1016/j.synthmet.2014.10.017
ER  - 
@article{
author = "Kepić, Dejan P. and Marković, Zoran M. and Jovanović, Svetlana P. and Peruško, Davor and Budimir, Milica and Holclajtner-Antunović, Ivanka D. and Pavlović, Vladimir B. and Todorović-Marković, Biljana",
year = "2014",
abstract = "Enhanced conductivity, transparency and stability are the most important factors to consider in order to prepare electrodes for optoelectronic devices. In this paper, we investigated the properties of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films doped with graphene and graphene quantum dots. Samples were deposited by spin-coating onto glass substrates. Thin films were characterized by UV-vis and Raman spectroscopy, atomic force microscopy (AFM), scanning electron microscopy (SEM) and four-point probe measurements. It was found that both graphene and graphene quantum dots improve the conductivity of PEDOT:PSS films with only small decrease in transparency. AFM and SEM analysis showed homogenous distribution of spherical nanoparticles of graphene quantum dots and irregular shaped nanoparticles of graphene in PEDOT:PSS. (C) 2014 Elsevier B.V. All rights reserved.",
journal = "Synthetic Metals",
title = "Preparation of PEDOT:PSS thin films doped with graphene and graphene quantum dots",
volume = "198",
pages = "150-154",
doi = "10.1016/j.synthmet.2014.10.017"
}
Kepić, D. P., Marković, Z. M., Jovanović, S. P., Peruško, D., Budimir, M., Holclajtner-Antunović, I. D., Pavlović, V. B.,& Todorović-Marković, B.. (2014). Preparation of PEDOT:PSS thin films doped with graphene and graphene quantum dots. in Synthetic Metals, 198, 150-154.
https://doi.org/10.1016/j.synthmet.2014.10.017
Kepić DP, Marković ZM, Jovanović SP, Peruško D, Budimir M, Holclajtner-Antunović ID, Pavlović VB, Todorović-Marković B. Preparation of PEDOT:PSS thin films doped with graphene and graphene quantum dots. in Synthetic Metals. 2014;198:150-154.
doi:10.1016/j.synthmet.2014.10.017 .
Kepić, Dejan P., Marković, Zoran M., Jovanović, Svetlana P., Peruško, Davor, Budimir, Milica, Holclajtner-Antunović, Ivanka D., Pavlović, Vladimir B., Todorović-Marković, Biljana, "Preparation of PEDOT:PSS thin films doped with graphene and graphene quantum dots" in Synthetic Metals, 198 (2014):150-154,
https://doi.org/10.1016/j.synthmet.2014.10.017 . .
3
18
17
17

Laser-induced surface oxidation of (Ni/Ti)/Si system with picosecond laser pulses

Petrović, Suzana; Peruško, Davor; Kovač, Janez; Siketic, Z.; Bogdanović-Radović, Ivančica; Gaković, Biljana M.; Radak, Bojan; Trtica, Milan

(2014)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Kovač, Janez
AU  - Siketic, Z.
AU  - Bogdanović-Radović, Ivančica
AU  - Gaković, Biljana M.
AU  - Radak, Bojan
AU  - Trtica, Milan
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5842
AB  - The surface oxidation of Ni/Ti bilayer, deposited on silicon substrate, affected by picosecond Nd: YAG laser radiation has been investigated. Fluence close to the target ablation threshold and multi-pulse laser irradiation regime were applied. Changes in the chemical composition of the formed surface oxide layer were studied by Elastic Recoil Detection Analysis (ERDA) and X-ray photoelectron spectroscopy (XPS). Morphological features analysis, at the oxide surface layer, was monitored, too. Laser modification as-deposited (Ni/Ti)/Si sample with 10 pulses induces a progressed interaction between Ni and Ti layers with the initial surface oxidation and formation of NiTi alloy phase. Progressed intermixing of components was achieved for the irradiation with 50 and more pulses, when all components were quite uniformly distributed to a depth of about 80 nm. An oxide layer was formed at the surface, with the specific combination of the oxide phases depending on the number of accumulated pulses. Changes in the morphological characteristics are reflected in the increase of the mean surface roughness and the generation of a certain number of cavities. These features are decreased with increasing number of pulses, caused by the surface melting and a pronounced mobility of the materials. (C) 2013 Elsevier B.V. All rights reserved.
T2  - Materials Chemistry and Physics
T1  - Laser-induced surface oxidation of (Ni/Ti)/Si system with picosecond laser pulses
VL  - 143
IS  - 2
SP  - 530
EP  - 535
DO  - 10.1016/j.matchemphys.2013.09.021
ER  - 
@article{
author = "Petrović, Suzana and Peruško, Davor and Kovač, Janez and Siketic, Z. and Bogdanović-Radović, Ivančica and Gaković, Biljana M. and Radak, Bojan and Trtica, Milan",
year = "2014",
abstract = "The surface oxidation of Ni/Ti bilayer, deposited on silicon substrate, affected by picosecond Nd: YAG laser radiation has been investigated. Fluence close to the target ablation threshold and multi-pulse laser irradiation regime were applied. Changes in the chemical composition of the formed surface oxide layer were studied by Elastic Recoil Detection Analysis (ERDA) and X-ray photoelectron spectroscopy (XPS). Morphological features analysis, at the oxide surface layer, was monitored, too. Laser modification as-deposited (Ni/Ti)/Si sample with 10 pulses induces a progressed interaction between Ni and Ti layers with the initial surface oxidation and formation of NiTi alloy phase. Progressed intermixing of components was achieved for the irradiation with 50 and more pulses, when all components were quite uniformly distributed to a depth of about 80 nm. An oxide layer was formed at the surface, with the specific combination of the oxide phases depending on the number of accumulated pulses. Changes in the morphological characteristics are reflected in the increase of the mean surface roughness and the generation of a certain number of cavities. These features are decreased with increasing number of pulses, caused by the surface melting and a pronounced mobility of the materials. (C) 2013 Elsevier B.V. All rights reserved.",
journal = "Materials Chemistry and Physics",
title = "Laser-induced surface oxidation of (Ni/Ti)/Si system with picosecond laser pulses",
volume = "143",
number = "2",
pages = "530-535",
doi = "10.1016/j.matchemphys.2013.09.021"
}
Petrović, S., Peruško, D., Kovač, J., Siketic, Z., Bogdanović-Radović, I., Gaković, B. M., Radak, B.,& Trtica, M.. (2014). Laser-induced surface oxidation of (Ni/Ti)/Si system with picosecond laser pulses. in Materials Chemistry and Physics, 143(2), 530-535.
https://doi.org/10.1016/j.matchemphys.2013.09.021
Petrović S, Peruško D, Kovač J, Siketic Z, Bogdanović-Radović I, Gaković BM, Radak B, Trtica M. Laser-induced surface oxidation of (Ni/Ti)/Si system with picosecond laser pulses. in Materials Chemistry and Physics. 2014;143(2):530-535.
doi:10.1016/j.matchemphys.2013.09.021 .
Petrović, Suzana, Peruško, Davor, Kovač, Janez, Siketic, Z., Bogdanović-Radović, Ivančica, Gaković, Biljana M., Radak, Bojan, Trtica, Milan, "Laser-induced surface oxidation of (Ni/Ti)/Si system with picosecond laser pulses" in Materials Chemistry and Physics, 143, no. 2 (2014):530-535,
https://doi.org/10.1016/j.matchemphys.2013.09.021 . .
6
5
5

Laser-induced surface alloying in nanosized Ni/Ti multilayer structures

Petrović, Suzana; Radak, Bojan; Peruško, Davor; Pelicon, P.; Kovač, Janez; Mitrić, Miodrag; Gaković, Biljana M.; Trtica, Milan

(2013)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Radak, Bojan
AU  - Peruško, Davor
AU  - Pelicon, P.
AU  - Kovač, Janez
AU  - Mitrić, Miodrag
AU  - Gaković, Biljana M.
AU  - Trtica, Milan
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5187
AB  - Laser-induced alloying effects on the composition and structure of different Ni/Ti multilayer structures were studied. Thin films composed of one, five, and ten (Ni/Ti) bilayers were deposited by DC ion sputtering on (1 0 0) Si wafers. Laser irradiations were performed by 150 ps pulses of a Nd:YAG laser operating at 1064 nm. The samples were characterized by Rutherford backscattering spectrometry (RBS), Auger electron spectroscopy (AES), X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). At a laser fluence of 0.9 J cm(-2), interaction between Ni and Ti layers was initiated, and NiTi alloy formed in 5- and 10-bilayered samples. Progressed alloying was achieved at a laser fluence of 1.2 J cm(-2). The alloy was formed mostly within the heat affected zone (HAZ) of the sample. Surface segregation of titanium was followed by formation of a 25 nm thin TiO2 film on the surface of the multilayered structures. In addition, parallel periodic surface structures on the surfaces of the 5- and 10-bilayered samples were clearly recorded. Their period in the case of the 5-bilayered system (0.77 mu m) agrees very well with the predictions of the common theory, whereas, in the case of the 10-bilayered system, two periods of such structures are observed (1.43 mu m and 0.4 mu m), and none of them coincides with the prediction. (C) 2012 Elsevier B. V. All rights reserved.
T2  - Applied Surface Science
T1  - Laser-induced surface alloying in nanosized Ni/Ti multilayer structures
VL  - 264
SP  - 273
EP  - 279
DO  - 10.1016/j.apsusc.2012.10.012
ER  - 
@article{
author = "Petrović, Suzana and Radak, Bojan and Peruško, Davor and Pelicon, P. and Kovač, Janez and Mitrić, Miodrag and Gaković, Biljana M. and Trtica, Milan",
year = "2013",
abstract = "Laser-induced alloying effects on the composition and structure of different Ni/Ti multilayer structures were studied. Thin films composed of one, five, and ten (Ni/Ti) bilayers were deposited by DC ion sputtering on (1 0 0) Si wafers. Laser irradiations were performed by 150 ps pulses of a Nd:YAG laser operating at 1064 nm. The samples were characterized by Rutherford backscattering spectrometry (RBS), Auger electron spectroscopy (AES), X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). At a laser fluence of 0.9 J cm(-2), interaction between Ni and Ti layers was initiated, and NiTi alloy formed in 5- and 10-bilayered samples. Progressed alloying was achieved at a laser fluence of 1.2 J cm(-2). The alloy was formed mostly within the heat affected zone (HAZ) of the sample. Surface segregation of titanium was followed by formation of a 25 nm thin TiO2 film on the surface of the multilayered structures. In addition, parallel periodic surface structures on the surfaces of the 5- and 10-bilayered samples were clearly recorded. Their period in the case of the 5-bilayered system (0.77 mu m) agrees very well with the predictions of the common theory, whereas, in the case of the 10-bilayered system, two periods of such structures are observed (1.43 mu m and 0.4 mu m), and none of them coincides with the prediction. (C) 2012 Elsevier B. V. All rights reserved.",
journal = "Applied Surface Science",
title = "Laser-induced surface alloying in nanosized Ni/Ti multilayer structures",
volume = "264",
pages = "273-279",
doi = "10.1016/j.apsusc.2012.10.012"
}
Petrović, S., Radak, B., Peruško, D., Pelicon, P., Kovač, J., Mitrić, M., Gaković, B. M.,& Trtica, M.. (2013). Laser-induced surface alloying in nanosized Ni/Ti multilayer structures. in Applied Surface Science, 264, 273-279.
https://doi.org/10.1016/j.apsusc.2012.10.012
Petrović S, Radak B, Peruško D, Pelicon P, Kovač J, Mitrić M, Gaković BM, Trtica M. Laser-induced surface alloying in nanosized Ni/Ti multilayer structures. in Applied Surface Science. 2013;264:273-279.
doi:10.1016/j.apsusc.2012.10.012 .
Petrović, Suzana, Radak, Bojan, Peruško, Davor, Pelicon, P., Kovač, Janez, Mitrić, Miodrag, Gaković, Biljana M., Trtica, Milan, "Laser-induced surface alloying in nanosized Ni/Ti multilayer structures" in Applied Surface Science, 264 (2013):273-279,
https://doi.org/10.1016/j.apsusc.2012.10.012 . .
15
15
15

Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids

Petrović, Suzana; Salatić, Branislav; Peruško, Davor; Bogdanović-Radović, Ivančica; Cekada, Miha; Gaković, Biljana M.; Pantelić, Dejan; Trtica, Milan; Jelenković, Branislav

(2013)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Salatić, Branislav
AU  - Peruško, Davor
AU  - Bogdanović-Radović, Ivančica
AU  - Cekada, Miha
AU  - Gaković, Biljana M.
AU  - Pantelić, Dejan
AU  - Trtica, Milan
AU  - Jelenković, Branislav
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5456
AB  - The interaction of an Er, Yb, Cr-glass laser, operating at 1540 nm wavelength and a pulse duration of 40 ns, with Ni/Ti multilayer thin films has been studied. Five (Ni/Ti) bilayers deposited by DC ion sputtering on Si(100) wafers to a total thickness of about 180 nm were treated with laser fluences of about 6.4 and 8.8 J cm(-2). Single and multi-pulse laser irradiation was done at normal incidence in air, water and ethanol ambients. The composition and surface morphology were monitored by particle-induced x-ray emission, Rutherford backscattering spectrometry (RBS), scanning electron microscopy and profilometry. Most of the absorbed laser energy was rapidly transformed into heat, producing intensive modifications of composition and morphology on the target surface. The results show an increase in surface roughness, formation of parallel periodic surface structures, appearance of hydrodynamic features and ablation of surface material. RBS analysis revealed that laser modification induced inter-mixing between the components of individual Ni and Ti layers, with indications of the formation of NiTi intermetallic compounds. An interesting finding is the morphological changes dominant in the Si substrate, whereas the Ni/Ti multilayer structure has mainly undergone changes in the chemical composition.
T2  - Laser Physics
T1  - Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids
VL  - 23
IS  - 2
DO  - 10.1088/1054-660X/23/2/026004
ER  - 
@article{
author = "Petrović, Suzana and Salatić, Branislav and Peruško, Davor and Bogdanović-Radović, Ivančica and Cekada, Miha and Gaković, Biljana M. and Pantelić, Dejan and Trtica, Milan and Jelenković, Branislav",
year = "2013",
abstract = "The interaction of an Er, Yb, Cr-glass laser, operating at 1540 nm wavelength and a pulse duration of 40 ns, with Ni/Ti multilayer thin films has been studied. Five (Ni/Ti) bilayers deposited by DC ion sputtering on Si(100) wafers to a total thickness of about 180 nm were treated with laser fluences of about 6.4 and 8.8 J cm(-2). Single and multi-pulse laser irradiation was done at normal incidence in air, water and ethanol ambients. The composition and surface morphology were monitored by particle-induced x-ray emission, Rutherford backscattering spectrometry (RBS), scanning electron microscopy and profilometry. Most of the absorbed laser energy was rapidly transformed into heat, producing intensive modifications of composition and morphology on the target surface. The results show an increase in surface roughness, formation of parallel periodic surface structures, appearance of hydrodynamic features and ablation of surface material. RBS analysis revealed that laser modification induced inter-mixing between the components of individual Ni and Ti layers, with indications of the formation of NiTi intermetallic compounds. An interesting finding is the morphological changes dominant in the Si substrate, whereas the Ni/Ti multilayer structure has mainly undergone changes in the chemical composition.",
journal = "Laser Physics",
title = "Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids",
volume = "23",
number = "2",
doi = "10.1088/1054-660X/23/2/026004"
}
Petrović, S., Salatić, B., Peruško, D., Bogdanović-Radović, I., Cekada, M., Gaković, B. M., Pantelić, D., Trtica, M.,& Jelenković, B.. (2013). Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids. in Laser Physics, 23(2).
https://doi.org/10.1088/1054-660X/23/2/026004
Petrović S, Salatić B, Peruško D, Bogdanović-Radović I, Cekada M, Gaković BM, Pantelić D, Trtica M, Jelenković B. Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids. in Laser Physics. 2013;23(2).
doi:10.1088/1054-660X/23/2/026004 .
Petrović, Suzana, Salatić, Branislav, Peruško, Davor, Bogdanović-Radović, Ivančica, Cekada, Miha, Gaković, Biljana M., Pantelić, Dejan, Trtica, Milan, Jelenković, Branislav, "Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids" in Laser Physics, 23, no. 2 (2013),
https://doi.org/10.1088/1054-660X/23/2/026004 . .

Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions

Petrović, Suzana; Peruško, Davor; Salatić, Branislav; Bogdanović-Radović, Ivančica; Panjan, Peter; Gaković, Biljana M.; Pantelić, Dejan; Trtica, Milan; Jelenković, Branislav

(2013)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Salatić, Branislav
AU  - Bogdanović-Radović, Ivančica
AU  - Panjan, Peter
AU  - Gaković, Biljana M.
AU  - Pantelić, Dejan
AU  - Trtica, Milan
AU  - Jelenković, Branislav
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5661
AB  - A study of morphological and composition changes of the (8(Al/Ti)/Si) system induced by laser pulses in different ambient conditions is presented. The effects of an Er, Yb, Cr-Glass laser, operating at 1540 nm wavelength with pulse duration of 44 ns, on a complex target were investigated. Irradiation of 8(Al/Ti)/Si was carried out at intensities of 5.9 and 9.5 x 10(11) W m(-2) in air, water and ethanol. The laser-induced morphological and composition modifications have shown dependence on applied intensities, number of laser pulses and ambient conditions. The following morphological changes were observed: (i) intense surface melting of the thin film and Si-substrate; (ii) ablation/exfoliation of the 8(Al/Ti) multilayer thin film from Si, (iii) appearance of hydrodynamic features such as resolidified material, and (iv) formation of crater at multi-pulse action. The formation of parallel periodic surface structure was only occurring in single pulse air-assisted modification. Analysis of the composition revealed that laser modification induced intermixing between the components of individual Al and Ti layers with potential formation of AlTi intermetallic compounds. (C) 2013 Elsevier Ltd. All rights reserved.
T2  - Optics and Laser Technology
T1  - Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions
VL  - 54
SP  - 22
EP  - 29
DO  - 10.1016/j.optlastec.2013.04.030
ER  - 
@article{
author = "Petrović, Suzana and Peruško, Davor and Salatić, Branislav and Bogdanović-Radović, Ivančica and Panjan, Peter and Gaković, Biljana M. and Pantelić, Dejan and Trtica, Milan and Jelenković, Branislav",
year = "2013",
abstract = "A study of morphological and composition changes of the (8(Al/Ti)/Si) system induced by laser pulses in different ambient conditions is presented. The effects of an Er, Yb, Cr-Glass laser, operating at 1540 nm wavelength with pulse duration of 44 ns, on a complex target were investigated. Irradiation of 8(Al/Ti)/Si was carried out at intensities of 5.9 and 9.5 x 10(11) W m(-2) in air, water and ethanol. The laser-induced morphological and composition modifications have shown dependence on applied intensities, number of laser pulses and ambient conditions. The following morphological changes were observed: (i) intense surface melting of the thin film and Si-substrate; (ii) ablation/exfoliation of the 8(Al/Ti) multilayer thin film from Si, (iii) appearance of hydrodynamic features such as resolidified material, and (iv) formation of crater at multi-pulse action. The formation of parallel periodic surface structure was only occurring in single pulse air-assisted modification. Analysis of the composition revealed that laser modification induced intermixing between the components of individual Al and Ti layers with potential formation of AlTi intermetallic compounds. (C) 2013 Elsevier Ltd. All rights reserved.",
journal = "Optics and Laser Technology",
title = "Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions",
volume = "54",
pages = "22-29",
doi = "10.1016/j.optlastec.2013.04.030"
}
Petrović, S., Peruško, D., Salatić, B., Bogdanović-Radović, I., Panjan, P., Gaković, B. M., Pantelić, D., Trtica, M.,& Jelenković, B.. (2013). Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions. in Optics and Laser Technology, 54, 22-29.
https://doi.org/10.1016/j.optlastec.2013.04.030
Petrović S, Peruško D, Salatić B, Bogdanović-Radović I, Panjan P, Gaković BM, Pantelić D, Trtica M, Jelenković B. Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions. in Optics and Laser Technology. 2013;54:22-29.
doi:10.1016/j.optlastec.2013.04.030 .
Petrović, Suzana, Peruško, Davor, Salatić, Branislav, Bogdanović-Radović, Ivančica, Panjan, Peter, Gaković, Biljana M., Pantelić, Dejan, Trtica, Milan, Jelenković, Branislav, "Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions" in Optics and Laser Technology, 54 (2013):22-29,
https://doi.org/10.1016/j.optlastec.2013.04.030 . .
6
7
10

Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films

Petrović, Suzana; Gaković, Biljana M.; Peruško, Davor; Stratakis, E.; Bogdanović-Radović, Ivančica; Čekada, Miha; Fotakis, C.; Jelenković, Branislav

(2013)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Gaković, Biljana M.
AU  - Peruško, Davor
AU  - Stratakis, E.
AU  - Bogdanović-Radović, Ivančica
AU  - Čekada, Miha
AU  - Fotakis, C.
AU  - Jelenković, Branislav
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5819
AB  - Laser-induced periodic surface structures (LIPSSs) and chemical composition changes of Ti-based nanolayered thin films (Al/Ti, Ni/Ti) after femtosecond (fs) laser pulses action were studied. Irradiation is performed using linearly polarized Ti:Sapphire fs laser pulses of 40 fs pulse duration and 800 nm wavelength. The low spatial frequency LIPSS (LSFL), oriented perpendicular to the laser polarization with periods slightly lower than the irradiation wavelength, was typically formed at elevated laser fluences. On the contrary, high spatial frequency LIPSS (HSFL) with uniform period of 155 nm, parallel to the laser light polarization, appeared at low laser fluences, as well as in the wings of the Gaussian laser beam distribution for higher used fluence. LSFL formation was associated with the material ablation process and accompanied by the intense formation of nanoparticles, especially in the Ni/Ti system. The composition changes at the surface of both multilayer systems in the LSFL area indicated the intermixing between layers and the substrate. Concentration and distribution of all constitutive elements in the irradiated area with formed HSFLs were almost unchanged. (C) 2013 AIP Publishing LLC.
T2  - Journal of Applied Physics
T1  - Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films
VL  - 114
IS  - 23
DO  - 10.1063/1.4848016
ER  - 
@article{
author = "Petrović, Suzana and Gaković, Biljana M. and Peruško, Davor and Stratakis, E. and Bogdanović-Radović, Ivančica and Čekada, Miha and Fotakis, C. and Jelenković, Branislav",
year = "2013",
abstract = "Laser-induced periodic surface structures (LIPSSs) and chemical composition changes of Ti-based nanolayered thin films (Al/Ti, Ni/Ti) after femtosecond (fs) laser pulses action were studied. Irradiation is performed using linearly polarized Ti:Sapphire fs laser pulses of 40 fs pulse duration and 800 nm wavelength. The low spatial frequency LIPSS (LSFL), oriented perpendicular to the laser polarization with periods slightly lower than the irradiation wavelength, was typically formed at elevated laser fluences. On the contrary, high spatial frequency LIPSS (HSFL) with uniform period of 155 nm, parallel to the laser light polarization, appeared at low laser fluences, as well as in the wings of the Gaussian laser beam distribution for higher used fluence. LSFL formation was associated with the material ablation process and accompanied by the intense formation of nanoparticles, especially in the Ni/Ti system. The composition changes at the surface of both multilayer systems in the LSFL area indicated the intermixing between layers and the substrate. Concentration and distribution of all constitutive elements in the irradiated area with formed HSFLs were almost unchanged. (C) 2013 AIP Publishing LLC.",
journal = "Journal of Applied Physics",
title = "Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films",
volume = "114",
number = "23",
doi = "10.1063/1.4848016"
}
Petrović, S., Gaković, B. M., Peruško, D., Stratakis, E., Bogdanović-Radović, I., Čekada, M., Fotakis, C.,& Jelenković, B.. (2013). Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films. in Journal of Applied Physics, 114(23).
https://doi.org/10.1063/1.4848016
Petrović S, Gaković BM, Peruško D, Stratakis E, Bogdanović-Radović I, Čekada M, Fotakis C, Jelenković B. Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films. in Journal of Applied Physics. 2013;114(23).
doi:10.1063/1.4848016 .
Petrović, Suzana, Gaković, Biljana M., Peruško, Davor, Stratakis, E., Bogdanović-Radović, Ivančica, Čekada, Miha, Fotakis, C., Jelenković, Branislav, "Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films" in Journal of Applied Physics, 114, no. 23 (2013),
https://doi.org/10.1063/1.4848016 . .
27
24
24