TY  - JOUR
AU  - Milovanović, Dubravka S.
AU  - Rajčić, Boris
AU  - Petronić, Sanja
AU  - Radulović, Aleksandra
AU  - Radak, Bojan
AU  - Gaković, Biljana M.
AU  - Zamfirescu, Marian
AU  - Albu, Catalina
AU  - Savović, Jelena
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10116
AB  - The surface of a titanium-based alloy Ti6Al4V was subjected to modifications by a near-IR femtosecond Ti:Sapphire laser, emitting at 775 nm pulses of 200 fs duration, in single-pulse and multi-pulse regimes, with up to 400 accumulated pulses, and pulse energies ranging from 2.5 to 250 $$\upmu $$J. The whole range of induced effects is presented, from gentle ablation and pattern occurrence to substantial crater formation. Very observable laser-induced parallel periodic surface structures are reported, appearing both within the damage spot area, with low fluences, and at the peripheries of the craters, with higher fluences—but also on crater walls, and inside the crater structures. Damage threshold fluences $$({F}_{\mathrm{th}})$$and the incubation factor $$(\zeta )$$were also determined.
T2  - European Physical Journal D. Atoms, Molecules, Clusters and Optical Physics
T1  - Comprehensive ablation study of near-IR femtosecond laser action on the titanium-based alloy Ti6Al4V: morphological effects and surface structures at low and high fluences
VL  - 76
IS  - 1
SP  - 2
DO  - 10.1140/epjd/s10053-021-00308-z
ER  - 

@article{
author = "Milovanović, Dubravka S. and Rajčić, Boris and Petronić, Sanja and Radulović, Aleksandra and Radak, Bojan and Gaković, Biljana M. and Zamfirescu, Marian and Albu, Catalina and Savović, Jelena",
year = "2022",
abstract = "The surface of a titanium-based alloy Ti6Al4V was subjected to modifications by a near-IR femtosecond Ti:Sapphire laser, emitting at 775 nm pulses of 200 fs duration, in single-pulse and multi-pulse regimes, with up to 400 accumulated pulses, and pulse energies ranging from 2.5 to 250 $$\upmu $$J. The whole range of induced effects is presented, from gentle ablation and pattern occurrence to substantial crater formation. Very observable laser-induced parallel periodic surface structures are reported, appearing both within the damage spot area, with low fluences, and at the peripheries of the craters, with higher fluences—but also on crater walls, and inside the crater structures. Damage threshold fluences $$({F}_{\mathrm{th}})$$and the incubation factor $$(\zeta )$$were also determined.",
journal = "European Physical Journal D. Atoms, Molecules, Clusters and Optical Physics",
title = "Comprehensive ablation study of near-IR femtosecond laser action on the titanium-based alloy Ti6Al4V: morphological effects and surface structures at low and high fluences",
volume = "76",
number = "1",
pages = "2",
doi = "10.1140/epjd/s10053-021-00308-z"
}

Milovanović, D. S., Rajčić, B., Petronić, S., Radulović, A., Radak, B., Gaković, B. M., Zamfirescu, M., Albu, C.,& Savović, J.. (2022). Comprehensive ablation study of near-IR femtosecond laser action on the titanium-based alloy Ti6Al4V: morphological effects and surface structures at low and high fluences. in European Physical Journal D. Atoms, Molecules, Clusters and Optical Physics, 76(1), 2.
https://doi.org/10.1140/epjd/s10053-021-00308-z

Milovanović DS, Rajčić B, Petronić S, Radulović A, Radak B, Gaković BM, Zamfirescu M, Albu C, Savović J. Comprehensive ablation study of near-IR femtosecond laser action on the titanium-based alloy Ti6Al4V: morphological effects and surface structures at low and high fluences. in European Physical Journal D. Atoms, Molecules, Clusters and Optical Physics. 2022;76(1):2.
doi:10.1140/epjd/s10053-021-00308-z .

Milovanović, Dubravka S., Rajčić, Boris, Petronić, Sanja, Radulović, Aleksandra, Radak, Bojan, Gaković, Biljana M., Zamfirescu, Marian, Albu, Catalina, Savović, Jelena, "Comprehensive ablation study of near-IR femtosecond laser action on the titanium-based alloy Ti6Al4V: morphological effects and surface structures at low and high fluences" in European Physical Journal D. Atoms, Molecules, Clusters and Optical Physics, 76, no. 1 (2022):2,
https://doi.org/10.1140/epjd/s10053-021-00308-z . .

TY  - JOUR
AU  - Gaković, Biljana M.
AU  - Danilov, Pavel A.
AU  - Kudryashov, Sergey I.
AU  - Milovanović, Dubravka S.
AU  - Radulović, Aleksandra 
AU  - Panjan, Peter
AU  - Ionin, Andrey A.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10038
AB  - Results regarding morphological and compositional changes of bimetallic thin film (BMTF), composed of aluminium (Al) and titanium (Ti) nano-layers, by single fs laser pulses, are presented. Laser irradiation was conducted in the air with focused, linearly polarized laser pulses, the duration being 300 fs, wavelength 515 nm, and pulse energy up to 1.2μJ. Effects of the variations of the pulse energy on the changes were studied. In the experiment, single pulse energy values from 0.03 to 0.08 μ J caused ablation–photomechanical spallation of the upper part of BMTF layer from the Si substrate, without ablation of the whole film. Irradiation at higher pulse energies gradually removed the whole BMTF and even a part of the Si substrate. We explained the influence of different electron–phonon dynamics, in the case of multilayered thin films composed of Al and Ti, on BMTF ablation. Damage/ablation threshold, which is minimal pulse energy/fluence sufficient for starting ablation, was calculated. Graphic abstract: [Figure not available: see fulltext.] © 2021, The Author(s), under exclusive licence to EDP Sciences, SIF and Springer-Verlag GmbH Germany, part of Springer Nature.
T2  - European Physical Journal D. Atoms, Molecules, Clusters and Optical Physics
T1  - The morphological and compositional changes of bimetallic Ti/Al thin film induced by ultra-short laser pulses
VL  - 75
IS  - 11
DO  - 10.1140/epjd/s10053-021-00292-4
ER  - 

@article{
author = "Gaković, Biljana M. and Danilov, Pavel A. and Kudryashov, Sergey I. and Milovanović, Dubravka S. and Radulović, Aleksandra  and Panjan, Peter and Ionin, Andrey A.",
year = "2021",
abstract = "Results regarding morphological and compositional changes of bimetallic thin film (BMTF), composed of aluminium (Al) and titanium (Ti) nano-layers, by single fs laser pulses, are presented. Laser irradiation was conducted in the air with focused, linearly polarized laser pulses, the duration being 300 fs, wavelength 515 nm, and pulse energy up to 1.2μJ. Effects of the variations of the pulse energy on the changes were studied. In the experiment, single pulse energy values from 0.03 to 0.08 μ J caused ablation–photomechanical spallation of the upper part of BMTF layer from the Si substrate, without ablation of the whole film. Irradiation at higher pulse energies gradually removed the whole BMTF and even a part of the Si substrate. We explained the influence of different electron–phonon dynamics, in the case of multilayered thin films composed of Al and Ti, on BMTF ablation. Damage/ablation threshold, which is minimal pulse energy/fluence sufficient for starting ablation, was calculated. Graphic abstract: [Figure not available: see fulltext.] © 2021, The Author(s), under exclusive licence to EDP Sciences, SIF and Springer-Verlag GmbH Germany, part of Springer Nature.",
journal = "European Physical Journal D. Atoms, Molecules, Clusters and Optical Physics",
title = "The morphological and compositional changes of bimetallic Ti/Al thin film induced by ultra-short laser pulses",
volume = "75",
number = "11",
doi = "10.1140/epjd/s10053-021-00292-4"
}

Gaković, B. M., Danilov, P. A., Kudryashov, S. I., Milovanović, D. S., Radulović, A., Panjan, P.,& Ionin, A. A.. (2021). The morphological and compositional changes of bimetallic Ti/Al thin film induced by ultra-short laser pulses. in European Physical Journal D. Atoms, Molecules, Clusters and Optical Physics, 75(11).
https://doi.org/10.1140/epjd/s10053-021-00292-4

Gaković BM, Danilov PA, Kudryashov SI, Milovanović DS, Radulović A, Panjan P, Ionin AA. The morphological and compositional changes of bimetallic Ti/Al thin film induced by ultra-short laser pulses. in European Physical Journal D. Atoms, Molecules, Clusters and Optical Physics. 2021;75(11).
doi:10.1140/epjd/s10053-021-00292-4 .

Gaković, Biljana M., Danilov, Pavel A., Kudryashov, Sergey I., Milovanović, Dubravka S., Radulović, Aleksandra , Panjan, Peter, Ionin, Andrey A., "The morphological and compositional changes of bimetallic Ti/Al thin film induced by ultra-short laser pulses" in European Physical Journal D. Atoms, Molecules, Clusters and Optical Physics, 75, no. 11 (2021),
https://doi.org/10.1140/epjd/s10053-021-00292-4 . .

TY  - JOUR
AU  - Brković, Snežana M.
AU  - Marčeta Kaninski, Milica
AU  - Laušević, Petar
AU  - Šaponjić, Aleksandra
AU  - Radulović, Aleksandra
AU  - Rakić, Aleksandra A.
AU  - Pašti, Igor A.
AU  - Nikolić, Vladimir M.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8927
AB  - Durability and cost of Proton Exchange Membrane fuel cells (PEMFCs) are two major factors delaying their commercialization. Cost is associated with the price of the catalysts, while durability is associated with degradation and poisoning of the catalysts, primarily by CO. This motivated us to develop tungsten-carbide-oxide (WxCyOz) as a new non-carbon based catalyst support for Pt–Ru–based anode PEMFC catalyst. The aim was to improve performance and obtain higher CO tolerance compared to commercial catalysts. The performance of obtained PtRu/WxCyOz catalysts was investigated using cyclic voltammetry, linear scan voltammetry and rotating disk electrode voltammetry. Particular attention was given to the analysis of CO poisoning, to better understand how WxCyOz species can contribute to the CO tolerance of PtRu/WxCyOz. Improved oxidation of COads at low potentials (E < 0.5 V vs. RHE) was ascribed to OH provided by the oxide phase at the interfacial region between the support and the PtRu particles. On the other hand, at high potentials (E > 0.5 V vs. RHE) CO removal proceeds dominantly via OH provided from the oxidized metal sites. The obtained catalyst with the best performance (30% PtRu/WxCyOz) was tested as an anode catalyst in PEM fuel cell. When using synthetic reformate as a fuel in PEMFC, there is a significant power drop of 35.3 % for the commercial 30% PtRu/C catalyst, while for the PtRu/WxCyOz anode catalyst this drop is around 16 %.
T2  - International Journal of Hydrogen Energy
T1  - Non-stoichiometric tungsten-carbide-oxide-supported Pt–Ru anode catalysts for PEM fuel cells – From basic electrochemistry to fuel cell performance
VL  - 45
IS  - 27
SP  - 13929
EP  - 13938
DO  - 10.1016/j.ijhydene.2020.03.086
ER  - 

@article{
author = "Brković, Snežana M. and Marčeta Kaninski, Milica and Laušević, Petar and Šaponjić, Aleksandra and Radulović, Aleksandra and Rakić, Aleksandra A. and Pašti, Igor A. and Nikolić, Vladimir M.",
year = "2020",
abstract = "Durability and cost of Proton Exchange Membrane fuel cells (PEMFCs) are two major factors delaying their commercialization. Cost is associated with the price of the catalysts, while durability is associated with degradation and poisoning of the catalysts, primarily by CO. This motivated us to develop tungsten-carbide-oxide (WxCyOz) as a new non-carbon based catalyst support for Pt–Ru–based anode PEMFC catalyst. The aim was to improve performance and obtain higher CO tolerance compared to commercial catalysts. The performance of obtained PtRu/WxCyOz catalysts was investigated using cyclic voltammetry, linear scan voltammetry and rotating disk electrode voltammetry. Particular attention was given to the analysis of CO poisoning, to better understand how WxCyOz species can contribute to the CO tolerance of PtRu/WxCyOz. Improved oxidation of COads at low potentials (E < 0.5 V vs. RHE) was ascribed to OH provided by the oxide phase at the interfacial region between the support and the PtRu particles. On the other hand, at high potentials (E > 0.5 V vs. RHE) CO removal proceeds dominantly via OH provided from the oxidized metal sites. The obtained catalyst with the best performance (30% PtRu/WxCyOz) was tested as an anode catalyst in PEM fuel cell. When using synthetic reformate as a fuel in PEMFC, there is a significant power drop of 35.3 % for the commercial 30% PtRu/C catalyst, while for the PtRu/WxCyOz anode catalyst this drop is around 16 %.",
journal = "International Journal of Hydrogen Energy",
title = "Non-stoichiometric tungsten-carbide-oxide-supported Pt–Ru anode catalysts for PEM fuel cells – From basic electrochemistry to fuel cell performance",
volume = "45",
number = "27",
pages = "13929-13938",
doi = "10.1016/j.ijhydene.2020.03.086"
}

Brković, S. M., Marčeta Kaninski, M., Laušević, P., Šaponjić, A., Radulović, A., Rakić, A. A., Pašti, I. A.,& Nikolić, V. M.. (2020). Non-stoichiometric tungsten-carbide-oxide-supported Pt–Ru anode catalysts for PEM fuel cells – From basic electrochemistry to fuel cell performance. in International Journal of Hydrogen Energy, 45(27), 13929-13938.
https://doi.org/10.1016/j.ijhydene.2020.03.086

Brković SM, Marčeta Kaninski M, Laušević P, Šaponjić A, Radulović A, Rakić AA, Pašti IA, Nikolić VM. Non-stoichiometric tungsten-carbide-oxide-supported Pt–Ru anode catalysts for PEM fuel cells – From basic electrochemistry to fuel cell performance. in International Journal of Hydrogen Energy. 2020;45(27):13929-13938.
doi:10.1016/j.ijhydene.2020.03.086 .

Brković, Snežana M., Marčeta Kaninski, Milica, Laušević, Petar, Šaponjić, Aleksandra, Radulović, Aleksandra, Rakić, Aleksandra A., Pašti, Igor A., Nikolić, Vladimir M., "Non-stoichiometric tungsten-carbide-oxide-supported Pt–Ru anode catalysts for PEM fuel cells – From basic electrochemistry to fuel cell performance" in International Journal of Hydrogen Energy, 45, no. 27 (2020):13929-13938,
https://doi.org/10.1016/j.ijhydene.2020.03.086 . .

TY  - CONF
AU  - Filipović, Nenad
AU  - Stevanović, Magdalena
AU  - Pavlović, Vladimir B.
AU  - Radulović, Aleksandra
AU  - Stojanović, Zoran S.
AU  - Uskoković, Dragan
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/692
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7514
AB  - Poly-ε-caprolactone (PCL) is a semicrystalline, biodegradable and biocompatible polymer. Its advantages, as high permeability to small drug molecules, failure to generate an acidic environment during degradation (as compared to polylactides and polyglycolides) and a slow degradation rate, make this aliphatic polyester suitable for extended long-term delivery over a period of more than one year. In this study PCL particles were prepared by physicochemical method with solvent/nonsolvent systems. The synthetic polymer polyvinylpyrrolidone (PVP) and natural polymer poly (α, γ, L-glutamic acid) (PGA), were used as stabilizers and their influence on size and morphology of the particles was examined. The results were compared with those obtained without the use of stabilizers. Characterization of obtained particles was performed by Fourier transform infrared spectroscopy. The morphology and size distribution were determined using SEM and particle analyzer.
PB  - Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts
C3  - Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia
T1  - Synthesis and the effect of processing parameters on characteristics of poly-ε-caprolactone micro- and nanospheres
SP  - 2
EP  - 2
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7514
ER  - 

@conference{
author = "Filipović, Nenad and Stevanović, Magdalena and Pavlović, Vladimir B. and Radulović, Aleksandra and Stojanović, Zoran S. and Uskoković, Dragan",
year = "2011",
abstract = "Poly-ε-caprolactone (PCL) is a semicrystalline, biodegradable and biocompatible polymer. Its advantages, as high permeability to small drug molecules, failure to generate an acidic environment during degradation (as compared to polylactides and polyglycolides) and a slow degradation rate, make this aliphatic polyester suitable for extended long-term delivery over a period of more than one year. In this study PCL particles were prepared by physicochemical method with solvent/nonsolvent systems. The synthetic polymer polyvinylpyrrolidone (PVP) and natural polymer poly (α, γ, L-glutamic acid) (PGA), were used as stabilizers and their influence on size and morphology of the particles was examined. The results were compared with those obtained without the use of stabilizers. Characterization of obtained particles was performed by Fourier transform infrared spectroscopy. The morphology and size distribution were determined using SEM and particle analyzer.",
publisher = "Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts",
journal = "Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia",
title = "Synthesis and the effect of processing parameters on characteristics of poly-ε-caprolactone micro- and nanospheres",
pages = "2-2",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7514"
}

Filipović, N., Stevanović, M., Pavlović, V. B., Radulović, A., Stojanović, Z. S.,& Uskoković, D.. (2011). Synthesis and the effect of processing parameters on characteristics of poly-ε-caprolactone micro- and nanospheres. in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts., 2-2.
https://hdl.handle.net/21.15107/rcub_vinar_7514

Filipović N, Stevanović M, Pavlović VB, Radulović A, Stojanović ZS, Uskoković D. Synthesis and the effect of processing parameters on characteristics of poly-ε-caprolactone micro- and nanospheres. in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia. 2011;:2-2.
https://hdl.handle.net/21.15107/rcub_vinar_7514 .

Filipović, Nenad, Stevanović, Magdalena, Pavlović, Vladimir B., Radulović, Aleksandra, Stojanović, Zoran S., Uskoković, Dragan, "Synthesis and the effect of processing parameters on characteristics of poly-ε-caprolactone micro- and nanospheres" in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia (2011):2-2,
https://hdl.handle.net/21.15107/rcub_vinar_7514 .

TY  - CONF
AU  - Jevtić, Marija
AU  - Radulović, Aleksandra
AU  - Mitrić, Miodrag
AU  - Ignjatović, Nenad
AU  - Škapin, Srečo Davor
AU  - Uskoković, Dragan
PY  - 2007
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11963
AB  - Poli(laktid-ko-glikolid)/hidroksiapatit je bioaktivni, biodegradabilni kompozit dizajniran za potrebe rekonstrukcije i reparacije koštanog tkiva. Aplikativnost ovog materijala je usko vezana za brojne njegove osobine među kojima su veličina, oblik i struktura sintetisanih čestica. DLPLG/HAp je sintetisan primenom ultrazvučne metode i cilj ovog rada je predstavljanje analize uticaja različitih eksperimentalnih parametara, kao što su sintetska temperatura, sastav kompozita, izbor stabilizatora i sl., na veličinu i oblik sintetisanih čestica i p
PB  - Beograd : Institut tehničkih nauka SANU
C3  - Šesta konferencija mladih istraživača Nauka i inženjerstvo novih materijala : Program i knjiga apstrakata; Decembar 24–26, Beograd
T1  - Uticaj sintetskih parametara na morfologiju ultrazvučno sintetisanog DLPLG/HAp biokompozita
SP  - 1
EP  - 1
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11963
ER  - 

@conference{
author = "Jevtić, Marija and Radulović, Aleksandra and Mitrić, Miodrag and Ignjatović, Nenad and Škapin, Srečo Davor and Uskoković, Dragan",
year = "2007",
abstract = "Poli(laktid-ko-glikolid)/hidroksiapatit je bioaktivni, biodegradabilni kompozit dizajniran za potrebe rekonstrukcije i reparacije koštanog tkiva. Aplikativnost ovog materijala je usko vezana za brojne njegove osobine među kojima su veličina, oblik i struktura sintetisanih čestica. DLPLG/HAp je sintetisan primenom ultrazvučne metode i cilj ovog rada je predstavljanje analize uticaja različitih eksperimentalnih parametara, kao što su sintetska temperatura, sastav kompozita, izbor stabilizatora i sl., na veličinu i oblik sintetisanih čestica i p",
publisher = "Beograd : Institut tehničkih nauka SANU",
journal = "Šesta konferencija mladih istraživača Nauka i inženjerstvo novih materijala : Program i knjiga apstrakata; Decembar 24–26, Beograd",
title = "Uticaj sintetskih parametara na morfologiju ultrazvučno sintetisanog DLPLG/HAp biokompozita",
pages = "1-1",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11963"
}

Jevtić, M., Radulović, A., Mitrić, M., Ignjatović, N., Škapin, S. D.,& Uskoković, D.. (2007). Uticaj sintetskih parametara na morfologiju ultrazvučno sintetisanog DLPLG/HAp biokompozita. in Šesta konferencija mladih istraživača Nauka i inženjerstvo novih materijala : Program i knjiga apstrakata; Decembar 24–26, Beograd
Beograd : Institut tehničkih nauka SANU., 1-1.
https://hdl.handle.net/21.15107/rcub_vinar_11963

Jevtić M, Radulović A, Mitrić M, Ignjatović N, Škapin SD, Uskoković D. Uticaj sintetskih parametara na morfologiju ultrazvučno sintetisanog DLPLG/HAp biokompozita. in Šesta konferencija mladih istraživača Nauka i inženjerstvo novih materijala : Program i knjiga apstrakata; Decembar 24–26, Beograd. 2007;:1-1.
https://hdl.handle.net/21.15107/rcub_vinar_11963 .

Jevtić, Marija, Radulović, Aleksandra, Mitrić, Miodrag, Ignjatović, Nenad, Škapin, Srečo Davor, Uskoković, Dragan, "Uticaj sintetskih parametara na morfologiju ultrazvučno sintetisanog DLPLG/HAp biokompozita" in Šesta konferencija mladih istraživača Nauka i inženjerstvo novih materijala : Program i knjiga apstrakata; Decembar 24–26, Beograd (2007):1-1,
https://hdl.handle.net/21.15107/rcub_vinar_11963 .