TY  - JOUR
AU  - Butulija, Svetlana
AU  - Spasojević, Vojislav
AU  - Branković, Goran
AU  - Prekajski-Đorđević, Marija D.
AU  - Radulović, Tamara
AU  - Zarubica, Aleksandra R.
AU  - Matović, Branko
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10159
AB  - Spider silk-maghemite (SS-γ-Fe2O3) composite was obtained by simple and fast co-precipitation method at room temperature. The fibers were coated with maghemite nanoparticles with the average size of 25 nm. According to DTA, maghemite NPs contributed the thermal stability of the composite. Magnetic properties of as obtained composite were estimated. At room temperature, the system was is in a superparamagnetic state, while at temperature of 5 K the magnetic moments were blocked. This composite is seen as a novel hybrid material with superparamagnetic properties for possible applications in bioseparation, biosensors, magnetographic printing, magnetic screens, and magnetic filters as well as sensing/actuating components of MEMS.
T2  - Materials Letters
T1  - Synthesis, characterization and magnetic properties of spider silk coated with maghemite (γ-Fe2O3) nanoparticles
VL  - 314
SP  - 131856
DO  - 10.1016/j.matlet.2022.131856
ER  - 

@article{
author = "Butulija, Svetlana and Spasojević, Vojislav and Branković, Goran and Prekajski-Đorđević, Marija D. and Radulović, Tamara and Zarubica, Aleksandra R. and Matović, Branko",
year = "2022",
abstract = "Spider silk-maghemite (SS-γ-Fe2O3) composite was obtained by simple and fast co-precipitation method at room temperature. The fibers were coated with maghemite nanoparticles with the average size of 25 nm. According to DTA, maghemite NPs contributed the thermal stability of the composite. Magnetic properties of as obtained composite were estimated. At room temperature, the system was is in a superparamagnetic state, while at temperature of 5 K the magnetic moments were blocked. This composite is seen as a novel hybrid material with superparamagnetic properties for possible applications in bioseparation, biosensors, magnetographic printing, magnetic screens, and magnetic filters as well as sensing/actuating components of MEMS.",
journal = "Materials Letters",
title = "Synthesis, characterization and magnetic properties of spider silk coated with maghemite (γ-Fe2O3) nanoparticles",
volume = "314",
pages = "131856",
doi = "10.1016/j.matlet.2022.131856"
}

Butulija, S., Spasojević, V., Branković, G., Prekajski-Đorđević, M. D., Radulović, T., Zarubica, A. R.,& Matović, B.. (2022). Synthesis, characterization and magnetic properties of spider silk coated with maghemite (γ-Fe2O3) nanoparticles. in Materials Letters, 314, 131856.
https://doi.org/10.1016/j.matlet.2022.131856

Butulija S, Spasojević V, Branković G, Prekajski-Đorđević MD, Radulović T, Zarubica AR, Matović B. Synthesis, characterization and magnetic properties of spider silk coated with maghemite (γ-Fe2O3) nanoparticles. in Materials Letters. 2022;314:131856.
doi:10.1016/j.matlet.2022.131856 .

Butulija, Svetlana, Spasojević, Vojislav, Branković, Goran, Prekajski-Đorđević, Marija D., Radulović, Tamara, Zarubica, Aleksandra R., Matović, Branko, "Synthesis, characterization and magnetic properties of spider silk coated with maghemite (γ-Fe2O3) nanoparticles" in Materials Letters, 314 (2022):131856,
https://doi.org/10.1016/j.matlet.2022.131856 . .

TY  - JOUR
AU  - Vasiljević, Zorka
AU  - Dojčinović, Milena
AU  - Vujančević, Jelena
AU  - Janković-Častvan, Ivona
AU  - Ognjanović, Miloš
AU  - Tadić, Nenad B.
AU  - Stojadinović, Stevan
AU  - Branković, Goran O.
AU  - Nikolić, Maria Vesna
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9706
AB  - The aim of this work was to synthesize semiconducting oxide nanoparticles using a simple method with low production cost to be applied in natural sunlight for photocatalytic degradation of pollutants in waste water. Iron titanate (Fe2TiO5) nanoparticles with an orthorhombic structure were successfully synthesized using a modified sol–gel method and calcination at 750°C. The as-prepared Fe2TiO5 nanoparticles exhibited a moderate specific surface area. The mesoporous Fe2TiO5 nanoparticles possessed strong absorption in the visible-light region and the band gap was estimated to be around 2.16 eV. The photocatalytic activity was evaluated by the degradation of methylene blue under natural sunlight. The effect of parameters such as the amount of catalyst, initial concentration of the dye and pH of the dye solution on the removal efficiency of methylene blue was investigated. Fe2TiO5 showed high degradation efficiency in a strong alkaline medium that can be the result of the facilitated formation of OH radicals due to an increased concentration of hydroxyl ions.
T2  - Royal Society Open Science
T1  - Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method
VL  - 7
IS  - 9
SP  - 200708
DO  - 10.1098/rsos.200708
ER  - 

@article{
author = "Vasiljević, Zorka and Dojčinović, Milena and Vujančević, Jelena and Janković-Častvan, Ivona and Ognjanović, Miloš and Tadić, Nenad B. and Stojadinović, Stevan and Branković, Goran O. and Nikolić, Maria Vesna",
year = "2020",
abstract = "The aim of this work was to synthesize semiconducting oxide nanoparticles using a simple method with low production cost to be applied in natural sunlight for photocatalytic degradation of pollutants in waste water. Iron titanate (Fe2TiO5) nanoparticles with an orthorhombic structure were successfully synthesized using a modified sol–gel method and calcination at 750°C. The as-prepared Fe2TiO5 nanoparticles exhibited a moderate specific surface area. The mesoporous Fe2TiO5 nanoparticles possessed strong absorption in the visible-light region and the band gap was estimated to be around 2.16 eV. The photocatalytic activity was evaluated by the degradation of methylene blue under natural sunlight. The effect of parameters such as the amount of catalyst, initial concentration of the dye and pH of the dye solution on the removal efficiency of methylene blue was investigated. Fe2TiO5 showed high degradation efficiency in a strong alkaline medium that can be the result of the facilitated formation of OH radicals due to an increased concentration of hydroxyl ions.",
journal = "Royal Society Open Science",
title = "Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method",
volume = "7",
number = "9",
pages = "200708",
doi = "10.1098/rsos.200708"
}

Vasiljević, Z., Dojčinović, M., Vujančević, J., Janković-Častvan, I., Ognjanović, M., Tadić, N. B., Stojadinović, S., Branković, G. O.,& Nikolić, M. V.. (2020). Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method. in Royal Society Open Science, 7(9), 200708.
https://doi.org/10.1098/rsos.200708

Vasiljević Z, Dojčinović M, Vujančević J, Janković-Častvan I, Ognjanović M, Tadić NB, Stojadinović S, Branković GO, Nikolić MV. Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method. in Royal Society Open Science. 2020;7(9):200708.
doi:10.1098/rsos.200708 .

Vasiljević, Zorka, Dojčinović, Milena, Vujančević, Jelena, Janković-Častvan, Ivona, Ognjanović, Miloš, Tadić, Nenad B., Stojadinović, Stevan, Branković, Goran O., Nikolić, Maria Vesna, "Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method" in Royal Society Open Science, 7, no. 9 (2020):200708,
https://doi.org/10.1098/rsos.200708 . .

TY  - JOUR
AU  - Dmitrović, Svetlana
AU  - Prekajski-Đorđević, Marija D.
AU  - Jokić, Bojan M.
AU  - Branković, Goran O.
AU  - Zarubica, Aleksandra R.
AU  - Žikić, Vladimir
AU  - Matović, Branko
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7616
AB  - Spider silk fibers, collected from Pholcus Phalangioides spider were used as a template for obtaining magnesium oxide (MgO, periclase) as well as magnesium hydroxide (Mg(OH)2, brucite) fibers. Magnesium oxide fibers were obtained in a simple manner by heat induced decomposition of magnesium salt (MgCl2) in the presence of the spider silk fibers, while magnesium hydroxidefibers were synthesized by hydration of MgO fibers at 50 °C, 70°C and 90 °C, for 48 and 96 h. According to Scanning electron microscopy (SEM), dimensions of spider silk fibers determined the dimension of synthesized MgO fibers, while for Mg(OH)2 fibers, the average diameter was increased with prolonging the hydration period. The surface of Mg(OH)2 fibers was noticed to be covered with brucite in a form of plates. X-ray diffraction (XRD) analysis showed that MgO fibers were single-phased (the pure magnesium oxide fibers were obtained), while Mg(OH)2 fibers were two- or single-phased brucite depending on incubation period, and/or incubation temperature.
AB  - Vlakna paukove mreže sakupljena od Pholcus phalangioides pauka korišćena su kao matrica za dobijanje vlakana magnezijum oksida (MgO, periklas) i magnezijum-hidroksida (Mg(OH)2, brucit). Vlakna magnezijum oksida jednostavno su dobijena termičkim razlaganjem soli magnezijuma (MgCl2) u prisustvu vlakana paukove mreže, dok su vlakna magnezijum hidroksida sintetisana hidratacijom MgO vlakana na temperaturama: 50, 70 i 90 °C u trajanju od 48 i 96 h. Na osnovu
rezultata skenirajuće elektronske mikroskopije (SEM), veličina sintetisanih MgO vlakana bila je određena dimenzijama vlakana pauka, dok je za Mg(OH)2 vlakna prosečan dijametar rastao sa produženjem perioda hidratacije. Na površini Mg(OH)2 vlakana uočeni su tabličasti kristali brucita. Difrakcija X zraka (XRD) pokazala je da su vlakna periklasa jednofazna (dobijen je čist magnezijum-oksid), dok su brucitna vlakna bila dvofazna ili jednofazna, u zavisnosti od inkubacionog perioda i/ili teperature na kojoj je vršena inkubacija.
T2  - Hemijska industrija
T1  - Spider silk as a template for obtaining magnesium oxide and magnesium hydroxide fibers
T1  - Sinteza vlakana magnezijum-oksida i magnezijum-hidroksida korišćenjem paukove mreže kao matrice
VL  - 72
IS  - 1
SP  - 23
EP  - 28
DO  - 10.2298/HEMIND170404018D
ER  - 

@article{
author = "Dmitrović, Svetlana and Prekajski-Đorđević, Marija D. and Jokić, Bojan M. and Branković, Goran O. and Zarubica, Aleksandra R. and Žikić, Vladimir and Matović, Branko",
year = "2018",
abstract = "Spider silk fibers, collected from Pholcus Phalangioides spider were used as a template for obtaining magnesium oxide (MgO, periclase) as well as magnesium hydroxide (Mg(OH)2, brucite) fibers. Magnesium oxide fibers were obtained in a simple manner by heat induced decomposition of magnesium salt (MgCl2) in the presence of the spider silk fibers, while magnesium hydroxidefibers were synthesized by hydration of MgO fibers at 50 °C, 70°C and 90 °C, for 48 and 96 h. According to Scanning electron microscopy (SEM), dimensions of spider silk fibers determined the dimension of synthesized MgO fibers, while for Mg(OH)2 fibers, the average diameter was increased with prolonging the hydration period. The surface of Mg(OH)2 fibers was noticed to be covered with brucite in a form of plates. X-ray diffraction (XRD) analysis showed that MgO fibers were single-phased (the pure magnesium oxide fibers were obtained), while Mg(OH)2 fibers were two- or single-phased brucite depending on incubation period, and/or incubation temperature., Vlakna paukove mreže sakupljena od Pholcus phalangioides pauka korišćena su kao matrica za dobijanje vlakana magnezijum oksida (MgO, periklas) i magnezijum-hidroksida (Mg(OH)2, brucit). Vlakna magnezijum oksida jednostavno su dobijena termičkim razlaganjem soli magnezijuma (MgCl2) u prisustvu vlakana paukove mreže, dok su vlakna magnezijum hidroksida sintetisana hidratacijom MgO vlakana na temperaturama: 50, 70 i 90 °C u trajanju od 48 i 96 h. Na osnovu
rezultata skenirajuće elektronske mikroskopije (SEM), veličina sintetisanih MgO vlakana bila je određena dimenzijama vlakana pauka, dok je za Mg(OH)2 vlakna prosečan dijametar rastao sa produženjem perioda hidratacije. Na površini Mg(OH)2 vlakana uočeni su tabličasti kristali brucita. Difrakcija X zraka (XRD) pokazala je da su vlakna periklasa jednofazna (dobijen je čist magnezijum-oksid), dok su brucitna vlakna bila dvofazna ili jednofazna, u zavisnosti od inkubacionog perioda i/ili teperature na kojoj je vršena inkubacija.",
journal = "Hemijska industrija",
title = "Spider silk as a template for obtaining magnesium oxide and magnesium hydroxide fibers, Sinteza vlakana magnezijum-oksida i magnezijum-hidroksida korišćenjem paukove mreže kao matrice",
volume = "72",
number = "1",
pages = "23-28",
doi = "10.2298/HEMIND170404018D"
}

Dmitrović, S., Prekajski-Đorđević, M. D., Jokić, B. M., Branković, G. O., Zarubica, A. R., Žikić, V.,& Matović, B.. (2018). Spider silk as a template for obtaining magnesium oxide and magnesium hydroxide fibers. in Hemijska industrija, 72(1), 23-28.
https://doi.org/10.2298/HEMIND170404018D

Dmitrović S, Prekajski-Đorđević MD, Jokić BM, Branković GO, Zarubica AR, Žikić V, Matović B. Spider silk as a template for obtaining magnesium oxide and magnesium hydroxide fibers. in Hemijska industrija. 2018;72(1):23-28.
doi:10.2298/HEMIND170404018D .

Dmitrović, Svetlana, Prekajski-Đorđević, Marija D., Jokić, Bojan M., Branković, Goran O., Zarubica, Aleksandra R., Žikić, Vladimir, Matović, Branko, "Spider silk as a template for obtaining magnesium oxide and magnesium hydroxide fibers" in Hemijska industrija, 72, no. 1 (2018):23-28,
https://doi.org/10.2298/HEMIND170404018D . .

TY  - JOUR
AU  - Cvetković, Vesna S.
AU  - Vukićević, Nataša M.
AU  - Nikolić, Nebojša D.
AU  - Branković, Goran O.
AU  - Barudžija, Tanja
AU  - Jovićević, Jovan N.
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7641
AB  - The processes of electrochemical deposition of magnesium oxide/hydroxide on glassy carbon (GC) electrode from magnesium nitrate hexahydrate melt have been investigated. A novel procedure predicting a possibility of direct formation of magnesium oxide during electrodeposition from the nitrate melt used is reported. XRD analysis of the obtained deposits showed the formation of magnesium oxide along with magnesium hydroxide. The electrodeposition of magnesium oxide/hydroxide commences in magnesium underpotential (UPD) and continues through the magnesium overpotential (OPD) region. Network of individual or intertwined very thin needles as well as those grouped in flower-like aggregates or honeycomb-like structures were formed in both magnesium UPD and OPD regions. Formation of the long needles was explained through theories of mechanisms of dendrite formation. Hydrogen evolution commences in the magnesium OPD region and increases with the applied overpotential. Holes observed in the deposit originated from the detached hydrogen bubbles. The number, shape and size of the hole strongly depended on both the applied cathodic potential and the hold time of electrodeposition. Magnesium oxides/hydroxides syntheses taking part simultaneously at various applied potentials are a result of reactions between magnesium cations and products of water and nitrate anions reduction processes. Chemical reactions responsible for direct formation of magnesium oxide observed are those of magnesium ions and oxygen ions, formed by nitrate reduction taking part in the close vicinity of the working electrode. (C) 2018 Elsevier Ltd. All rights reserved.
T2  - Electrochimica Acta
T1  - Formation of needle-like and honeycomb-like magnesium oxide/hydroxide structures by electrodeposition from magnesium nitrate melts
VL  - 268
SP  - 494
EP  - 502
DO  - 10.1016/j.electacta.2018.02.121
ER  - 

@article{
author = "Cvetković, Vesna S. and Vukićević, Nataša M. and Nikolić, Nebojša D. and Branković, Goran O. and Barudžija, Tanja and Jovićević, Jovan N.",
year = "2018",
abstract = "The processes of electrochemical deposition of magnesium oxide/hydroxide on glassy carbon (GC) electrode from magnesium nitrate hexahydrate melt have been investigated. A novel procedure predicting a possibility of direct formation of magnesium oxide during electrodeposition from the nitrate melt used is reported. XRD analysis of the obtained deposits showed the formation of magnesium oxide along with magnesium hydroxide. The electrodeposition of magnesium oxide/hydroxide commences in magnesium underpotential (UPD) and continues through the magnesium overpotential (OPD) region. Network of individual or intertwined very thin needles as well as those grouped in flower-like aggregates or honeycomb-like structures were formed in both magnesium UPD and OPD regions. Formation of the long needles was explained through theories of mechanisms of dendrite formation. Hydrogen evolution commences in the magnesium OPD region and increases with the applied overpotential. Holes observed in the deposit originated from the detached hydrogen bubbles. The number, shape and size of the hole strongly depended on both the applied cathodic potential and the hold time of electrodeposition. Magnesium oxides/hydroxides syntheses taking part simultaneously at various applied potentials are a result of reactions between magnesium cations and products of water and nitrate anions reduction processes. Chemical reactions responsible for direct formation of magnesium oxide observed are those of magnesium ions and oxygen ions, formed by nitrate reduction taking part in the close vicinity of the working electrode. (C) 2018 Elsevier Ltd. All rights reserved.",
journal = "Electrochimica Acta",
title = "Formation of needle-like and honeycomb-like magnesium oxide/hydroxide structures by electrodeposition from magnesium nitrate melts",
volume = "268",
pages = "494-502",
doi = "10.1016/j.electacta.2018.02.121"
}

Cvetković, V. S., Vukićević, N. M., Nikolić, N. D., Branković, G. O., Barudžija, T.,& Jovićević, J. N.. (2018). Formation of needle-like and honeycomb-like magnesium oxide/hydroxide structures by electrodeposition from magnesium nitrate melts. in Electrochimica Acta, 268, 494-502.
https://doi.org/10.1016/j.electacta.2018.02.121

Cvetković VS, Vukićević NM, Nikolić ND, Branković GO, Barudžija T, Jovićević JN. Formation of needle-like and honeycomb-like magnesium oxide/hydroxide structures by electrodeposition from magnesium nitrate melts. in Electrochimica Acta. 2018;268:494-502.
doi:10.1016/j.electacta.2018.02.121 .

Cvetković, Vesna S., Vukićević, Nataša M., Nikolić, Nebojša D., Branković, Goran O., Barudžija, Tanja, Jovićević, Jovan N., "Formation of needle-like and honeycomb-like magnesium oxide/hydroxide structures by electrodeposition from magnesium nitrate melts" in Electrochimica Acta, 268 (2018):494-502,
https://doi.org/10.1016/j.electacta.2018.02.121 . .

TY  - JOUR
AU  - Vukićević, Nataša M.
AU  - Cvetković, Vesna S.
AU  - Nikolić, Nebojša D.
AU  - Branković, Goran O.
AU  - Barudžija, Tanja
AU  - Jovićević, Jovan N.
PY  - 2018
UR  - http://www.doiserbia.nb.rs/Article.aspx?ID=0352-51391800084V
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8019
AB  - Synthesis of the honeycomb-like MgO/Mg(OH)2 structures, with controlled shape and size of holes, by the electrolysis from magnesium nitrate hexahydrate melt onto glassy carbon is presented. The honeycomb-like structures were made up of holes, formed from detached hydrogen bubbles, surrounded by walls, built up of thin intertwined needles. For the first time, it was shown that the honeycomb-like structures can be obtained by molten salt electrolysis and not exclusively by electrolysis from aqueous electrolytes. Analogies with the processes of the honeycomb-like metal structures formation from aqueous electrolytes are presented and discussed. Rules established for the formation of these structures from aqueous electrolytes, such as the increase of number of holes, the decrease of holes size and coalescence of neighbouring hydrogen bubbles observed with increasing cathodic potential, appeared to be valid for the electrolysis of the molten salt used. © 2018 The Korean Physical Society. All rights reserved.
AB  - Представљено је формирање MgO/Mg(OH)2 структура облика пчелињег саћа контролисаног облика и величине рупа, процесом електролизе растопљеног магнезијум-
-нитрата-хексахидрата на стакластом угљенику. Добијене структуре пчелињег саћа су се
састојале од рупа, формираних одвајањем мехурова водоника, окружених зидом од
танких испреплетаних игала. По први пут је показано да се структуре пчелињег саћа
могу добити не само електролизом из водених електролита, већ такође и електролизом
из растопа. Аналогије са процесима формирања талога облика пчелињег саћа из водених раствора су изнесене и продискутоване. Све законитости утврђене за формирање
ових структура из водених електролита, као што су повећање броја рупа, смањење величине рупа и сједињавање суседних мехурова водоника посматраних са повећањем катодног потенцијала, важе и за електролизу из растопа.
T2  - Journal of the Serbian Chemical Society
T1  - Formation of the honeycomb-like MgO/Mg(OH)2 structures with controlled shape and size of holes by molten salt electrolysis
VL  - 83
IS  - 12
SP  - 1351
EP  - 1362
DO  - 10.2298/JSC180913084V
ER  - 

@article{
author = "Vukićević, Nataša M. and Cvetković, Vesna S. and Nikolić, Nebojša D. and Branković, Goran O. and Barudžija, Tanja and Jovićević, Jovan N.",
year = "2018",
abstract = "Synthesis of the honeycomb-like MgO/Mg(OH)2 structures, with controlled shape and size of holes, by the electrolysis from magnesium nitrate hexahydrate melt onto glassy carbon is presented. The honeycomb-like structures were made up of holes, formed from detached hydrogen bubbles, surrounded by walls, built up of thin intertwined needles. For the first time, it was shown that the honeycomb-like structures can be obtained by molten salt electrolysis and not exclusively by electrolysis from aqueous electrolytes. Analogies with the processes of the honeycomb-like metal structures formation from aqueous electrolytes are presented and discussed. Rules established for the formation of these structures from aqueous electrolytes, such as the increase of number of holes, the decrease of holes size and coalescence of neighbouring hydrogen bubbles observed with increasing cathodic potential, appeared to be valid for the electrolysis of the molten salt used. © 2018 The Korean Physical Society. All rights reserved., Представљено је формирање MgO/Mg(OH)2 структура облика пчелињег саћа контролисаног облика и величине рупа, процесом електролизе растопљеног магнезијум-
-нитрата-хексахидрата на стакластом угљенику. Добијене структуре пчелињег саћа су се
састојале од рупа, формираних одвајањем мехурова водоника, окружених зидом од
танких испреплетаних игала. По први пут је показано да се структуре пчелињег саћа
могу добити не само електролизом из водених електролита, већ такође и електролизом
из растопа. Аналогије са процесима формирања талога облика пчелињег саћа из водених раствора су изнесене и продискутоване. Све законитости утврђене за формирање
ових структура из водених електролита, као што су повећање броја рупа, смањење величине рупа и сједињавање суседних мехурова водоника посматраних са повећањем катодног потенцијала, важе и за електролизу из растопа.",
journal = "Journal of the Serbian Chemical Society",
title = "Formation of the honeycomb-like MgO/Mg(OH)2 structures with controlled shape and size of holes by molten salt electrolysis",
volume = "83",
number = "12",
pages = "1351-1362",
doi = "10.2298/JSC180913084V"
}

Vukićević, N. M., Cvetković, V. S., Nikolić, N. D., Branković, G. O., Barudžija, T.,& Jovićević, J. N.. (2018). Formation of the honeycomb-like MgO/Mg(OH)2 structures with controlled shape and size of holes by molten salt electrolysis. in Journal of the Serbian Chemical Society, 83(12), 1351-1362.
https://doi.org/10.2298/JSC180913084V

Vukićević NM, Cvetković VS, Nikolić ND, Branković GO, Barudžija T, Jovićević JN. Formation of the honeycomb-like MgO/Mg(OH)2 structures with controlled shape and size of holes by molten salt electrolysis. in Journal of the Serbian Chemical Society. 2018;83(12):1351-1362.
doi:10.2298/JSC180913084V .

Vukićević, Nataša M., Cvetković, Vesna S., Nikolić, Nebojša D., Branković, Goran O., Barudžija, Tanja, Jovićević, Jovan N., "Formation of the honeycomb-like MgO/Mg(OH)2 structures with controlled shape and size of holes by molten salt electrolysis" in Journal of the Serbian Chemical Society, 83, no. 12 (2018):1351-1362,
https://doi.org/10.2298/JSC180913084V . .

TY  - JOUR
AU  - Trtica, Milan
AU  - Limpouch, Jiri
AU  - Gavrilov, Peter T.
AU  - Hribek, P.
AU  - Stašić, Jelena
AU  - Branković, Goran O.
AU  - Chen, X.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1713
AB  - A study of ASP 30 steel surface modification with high intensity Ti:sapphire laser, operating at 804 nm wavelength and pulse duration of 60 fs, in vacuum ambient, is presented. ASP 30 steel surface variations were studied at laser intensities of 10(14) and 10(13) W/cm(2). The steel target specific surface changes and phenomena observed are: (i) Creation of craters at 10(14) W/cm(2) intensity; (ii) formation of periodic surface structures only at the reduced intensity of 10(13) W/cm(2); (iii) chemical surface changes registered only at higher laser intensity, and (iv) occurrence of plasma in front of the surface, including its emission in X-ray region. It can be concluded from this study that the reported laser intensities can effectively be applied for ASP 30 steel surface modification. Careful choosing of laser intensity and pulse count can lead to precise superficial material removal, for example laser intensity similar to 10(13) W/cm(2) and low pulse count can lead to ultra-precise surface processing. Generally, femtosecond laser surface modification of ASP 30 steel is non-contact and very rapid compared with traditional modification methods.
T2  - Laser and Particle Beams
T1  - Surface modification of ASP 30 steel induced by femtosecond laser with 10(14) and 10(13) W/cm(2) intensity in vacuum
VL  - 35
IS  - 3
SP  - 534
EP  - 542
DO  - 10.1017/S0263034617000337
ER  - 

@article{
author = "Trtica, Milan and Limpouch, Jiri and Gavrilov, Peter T. and Hribek, P. and Stašić, Jelena and Branković, Goran O. and Chen, X.",
year = "2017",
abstract = "A study of ASP 30 steel surface modification with high intensity Ti:sapphire laser, operating at 804 nm wavelength and pulse duration of 60 fs, in vacuum ambient, is presented. ASP 30 steel surface variations were studied at laser intensities of 10(14) and 10(13) W/cm(2). The steel target specific surface changes and phenomena observed are: (i) Creation of craters at 10(14) W/cm(2) intensity; (ii) formation of periodic surface structures only at the reduced intensity of 10(13) W/cm(2); (iii) chemical surface changes registered only at higher laser intensity, and (iv) occurrence of plasma in front of the surface, including its emission in X-ray region. It can be concluded from this study that the reported laser intensities can effectively be applied for ASP 30 steel surface modification. Careful choosing of laser intensity and pulse count can lead to precise superficial material removal, for example laser intensity similar to 10(13) W/cm(2) and low pulse count can lead to ultra-precise surface processing. Generally, femtosecond laser surface modification of ASP 30 steel is non-contact and very rapid compared with traditional modification methods.",
journal = "Laser and Particle Beams",
title = "Surface modification of ASP 30 steel induced by femtosecond laser with 10(14) and 10(13) W/cm(2) intensity in vacuum",
volume = "35",
number = "3",
pages = "534-542",
doi = "10.1017/S0263034617000337"
}

Trtica, M., Limpouch, J., Gavrilov, P. T., Hribek, P., Stašić, J., Branković, G. O.,& Chen, X.. (2017). Surface modification of ASP 30 steel induced by femtosecond laser with 10(14) and 10(13) W/cm(2) intensity in vacuum. in Laser and Particle Beams, 35(3), 534-542.
https://doi.org/10.1017/S0263034617000337

Trtica M, Limpouch J, Gavrilov PT, Hribek P, Stašić J, Branković GO, Chen X. Surface modification of ASP 30 steel induced by femtosecond laser with 10(14) and 10(13) W/cm(2) intensity in vacuum. in Laser and Particle Beams. 2017;35(3):534-542.
doi:10.1017/S0263034617000337 .

Trtica, Milan, Limpouch, Jiri, Gavrilov, Peter T., Hribek, P., Stašić, Jelena, Branković, Goran O., Chen, X., "Surface modification of ASP 30 steel induced by femtosecond laser with 10(14) and 10(13) W/cm(2) intensity in vacuum" in Laser and Particle Beams, 35, no. 3 (2017):534-542,
https://doi.org/10.1017/S0263034617000337 . .

TY  - JOUR
AU  - Dmitrović, Svetlana
AU  - Nikolić, Marko G.
AU  - Jelenković, Branislav
AU  - Prekajski, Marija D.
AU  - Rabasović, Mihailo D.
AU  - Zarubica, Aleksandra R.
AU  - Branković, Goran O.
AU  - Matović, Branko
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1768
AB  - Spider dragline silk was coated with pure as well as Eu-doped ceria nanopowders at the room temperature. The treatment was done by immersion of the spider silkmesh into aqueous solutions of cerium nitrate (Ce(NO3)(3)) and ammonium hydroxide (NH4OH). Depending on the relationship between Ce3+ ion and ammonium hydroxide concentration, coated fibers exhibited a different thickness. Obtained materials were studied by means of FESEM. It was found that ceria nanoparticles of average size of 3 nm were coated along spider thread. X-ray diffraction (XRD) and selected-area electron diffraction (SAED) confirmed crystal nature of nanoparticle coating of spider silk. By using Williamson-Hall plots, crystallite size and strain were estimated. EDS measurement confirmed the presence of Eu in spider-Eu-doped ceria composite, and according to FTIR analysis, the interaction between CeO2 and spider silk was proposed. The morphology of obtained composite was observed by TEM. The photoluminescence emission spectra of spider silk coated with Eu-doped ceria were measured with two different excitations of 385 and 466 nm. The two-photon excited auto-fluorescence of spider silk coated with Eu-doped ceria was detected using a nonlinear laser scanning microscope. Obtained composite has a potential as a fluorescent labeling material in diverse applications.
T2  - Journal of Nanoparticle Research
T1  - Photoluminescent properties of spider silk coated with Eu-doped nanoceria
VL  - 19
IS  - 2
DO  - 10.1007/s11051-017-3750-9
ER  - 

@article{
author = "Dmitrović, Svetlana and Nikolić, Marko G. and Jelenković, Branislav and Prekajski, Marija D. and Rabasović, Mihailo D. and Zarubica, Aleksandra R. and Branković, Goran O. and Matović, Branko",
year = "2017",
abstract = "Spider dragline silk was coated with pure as well as Eu-doped ceria nanopowders at the room temperature. The treatment was done by immersion of the spider silkmesh into aqueous solutions of cerium nitrate (Ce(NO3)(3)) and ammonium hydroxide (NH4OH). Depending on the relationship between Ce3+ ion and ammonium hydroxide concentration, coated fibers exhibited a different thickness. Obtained materials were studied by means of FESEM. It was found that ceria nanoparticles of average size of 3 nm were coated along spider thread. X-ray diffraction (XRD) and selected-area electron diffraction (SAED) confirmed crystal nature of nanoparticle coating of spider silk. By using Williamson-Hall plots, crystallite size and strain were estimated. EDS measurement confirmed the presence of Eu in spider-Eu-doped ceria composite, and according to FTIR analysis, the interaction between CeO2 and spider silk was proposed. The morphology of obtained composite was observed by TEM. The photoluminescence emission spectra of spider silk coated with Eu-doped ceria were measured with two different excitations of 385 and 466 nm. The two-photon excited auto-fluorescence of spider silk coated with Eu-doped ceria was detected using a nonlinear laser scanning microscope. Obtained composite has a potential as a fluorescent labeling material in diverse applications.",
journal = "Journal of Nanoparticle Research",
title = "Photoluminescent properties of spider silk coated with Eu-doped nanoceria",
volume = "19",
number = "2",
doi = "10.1007/s11051-017-3750-9"
}

Dmitrović, S., Nikolić, M. G., Jelenković, B., Prekajski, M. D., Rabasović, M. D., Zarubica, A. R., Branković, G. O.,& Matović, B.. (2017). Photoluminescent properties of spider silk coated with Eu-doped nanoceria. in Journal of Nanoparticle Research, 19(2).
https://doi.org/10.1007/s11051-017-3750-9

Dmitrović S, Nikolić MG, Jelenković B, Prekajski MD, Rabasović MD, Zarubica AR, Branković GO, Matović B. Photoluminescent properties of spider silk coated with Eu-doped nanoceria. in Journal of Nanoparticle Research. 2017;19(2).
doi:10.1007/s11051-017-3750-9 .

Dmitrović, Svetlana, Nikolić, Marko G., Jelenković, Branislav, Prekajski, Marija D., Rabasović, Mihailo D., Zarubica, Aleksandra R., Branković, Goran O., Matović, Branko, "Photoluminescent properties of spider silk coated with Eu-doped nanoceria" in Journal of Nanoparticle Research, 19, no. 2 (2017),
https://doi.org/10.1007/s11051-017-3750-9 . .

TY  - JOUR
AU  - Simović, Bojana
AU  - Poleti, Dejan
AU  - Golubović, Aleksandar V.
AU  - Matković, Aleksandar
AU  - Šćepanović, Maja
AU  - Babić, Biljana M.
AU  - Branković, Goran O.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1523
AB  - In this work, Zn(CH3 COO)(2) 2 H-2 O with AgNO3 content from 0 to 6 mol% was solvothermally treated at 120 C for 18 h in the presence of poly(vinyl pyrrolidone), ethylene glycol and sodium hydroxide. The structural , microstructural and photocatalytic properties of the unmodified and Ag modified ZnO powders have been investigated by the XRPD, FESEM, TEM, UV-vis, Raman and BET techniques. The Ag modified samples consist of ZnO nanocrystals and metallic Ag on the surface. The average crystallite size of all samples was about 20 nm. The FESEM revealed the uniformity in size and approximately spherical shape of ZnO nanopar-ticles. The BET data suggest that all prepared samples are mesoporous. All prepared samples showed higher photocatalytic efficiency in the degradation of the Reactive Orange 16 (RO16) azo dye than the commercial ZnO. In addition, Ag modified ZnO powders, especially those with 1.5 and 0.75 mol% of Ag, were more efficient than the unmodified one.
T2  - Processing and Application of Ceramics
T1  - Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method
VL  - 11
IS  - 1
SP  - 27
EP  - 38
DO  - 10.2298/PAC1701027S
ER  - 

@article{
author = "Simović, Bojana and Poleti, Dejan and Golubović, Aleksandar V. and Matković, Aleksandar and Šćepanović, Maja and Babić, Biljana M. and Branković, Goran O.",
year = "2017",
abstract = "In this work, Zn(CH3 COO)(2) 2 H-2 O with AgNO3 content from 0 to 6 mol% was solvothermally treated at 120 C for 18 h in the presence of poly(vinyl pyrrolidone), ethylene glycol and sodium hydroxide. The structural , microstructural and photocatalytic properties of the unmodified and Ag modified ZnO powders have been investigated by the XRPD, FESEM, TEM, UV-vis, Raman and BET techniques. The Ag modified samples consist of ZnO nanocrystals and metallic Ag on the surface. The average crystallite size of all samples was about 20 nm. The FESEM revealed the uniformity in size and approximately spherical shape of ZnO nanopar-ticles. The BET data suggest that all prepared samples are mesoporous. All prepared samples showed higher photocatalytic efficiency in the degradation of the Reactive Orange 16 (RO16) azo dye than the commercial ZnO. In addition, Ag modified ZnO powders, especially those with 1.5 and 0.75 mol% of Ag, were more efficient than the unmodified one.",
journal = "Processing and Application of Ceramics",
title = "Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method",
volume = "11",
number = "1",
pages = "27-38",
doi = "10.2298/PAC1701027S"
}

Simović, B., Poleti, D., Golubović, A. V., Matković, A., Šćepanović, M., Babić, B. M.,& Branković, G. O.. (2017). Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method. in Processing and Application of Ceramics, 11(1), 27-38.
https://doi.org/10.2298/PAC1701027S

Simović B, Poleti D, Golubović AV, Matković A, Šćepanović M, Babić BM, Branković GO. Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method. in Processing and Application of Ceramics. 2017;11(1):27-38.
doi:10.2298/PAC1701027S .

Simović, Bojana, Poleti, Dejan, Golubović, Aleksandar V., Matković, Aleksandar, Šćepanović, Maja, Babić, Biljana M., Branković, Goran O., "Enhanced photocatalytic degradation of RO16 dye using Ag modified ZnO nanopowders prepared by the solvothermal method" in Processing and Application of Ceramics, 11, no. 1 (2017):27-38,
https://doi.org/10.2298/PAC1701027S . .

TY  - JOUR
AU  - Trtica, Milan
AU  - Limpouch, Jiri
AU  - Gavrilov, Peter T.
AU  - Gemini, L.
AU  - Panjan, Peter
AU  - Stašić, Jelena
AU  - Milovanović, Dubravka S.
AU  - Branković, Goran O.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/715
AB  - A double layer a-CN/TiAlN coating deposited on ASP30 steel substrate was irradiated by femtosecond laser and surface modification effects were observed. Moderate laser intensities used were in the range of 10(14)-10(13) W/cm(2), while the total thickness of double layer coating was 4.8 mu m (a-CN = 0.6 and TiAlN = 4.2 mu m). Laser-induced changes of the surface showed dependence on laser intensity and number of accumulated pulses. Irradiations at the highest intensity resulted in preservation of one or both layers up to 10 pulses, while at lower intensity (10(13) W/cm(2)) a-CN layer is removed after several pulses and TiAlN is preserved up to 50 pulses. Evaluated damage threshold of the target was 0.49 J/cm(2). Lower laser intensity irradiation produced periodic surface structures (LIPSS) over the entire irradiated spot with periodicity of similar to 700 nm, almost in agreement with the laser wavelength used. Irradiations carried out at the highest laser intensity (10(14) W/cm(2)) and laser pulse count of 50 resulted in the creation of crater like damages with depth up to 20 mu m. Craters were conically shaped, implying intensive processes which took place at the surface. Generation of LIPSS as well as craters can be of great interest for contemporary technologies.
T2  - Laser and Particle Beams
T1  - Surface modification of a-CN/TiAlN double layer coating on ASP 30 steel induced by femtosecond laser with 10(13)-10(14) W/cm(2) intensity in vacuum
VL  - 33
IS  - 3
SP  - 551
EP  - 559
DO  - 10.1017/S0263034615000610
ER  - 

@article{
author = "Trtica, Milan and Limpouch, Jiri and Gavrilov, Peter T. and Gemini, L. and Panjan, Peter and Stašić, Jelena and Milovanović, Dubravka S. and Branković, Goran O.",
year = "2015",
abstract = "A double layer a-CN/TiAlN coating deposited on ASP30 steel substrate was irradiated by femtosecond laser and surface modification effects were observed. Moderate laser intensities used were in the range of 10(14)-10(13) W/cm(2), while the total thickness of double layer coating was 4.8 mu m (a-CN = 0.6 and TiAlN = 4.2 mu m). Laser-induced changes of the surface showed dependence on laser intensity and number of accumulated pulses. Irradiations at the highest intensity resulted in preservation of one or both layers up to 10 pulses, while at lower intensity (10(13) W/cm(2)) a-CN layer is removed after several pulses and TiAlN is preserved up to 50 pulses. Evaluated damage threshold of the target was 0.49 J/cm(2). Lower laser intensity irradiation produced periodic surface structures (LIPSS) over the entire irradiated spot with periodicity of similar to 700 nm, almost in agreement with the laser wavelength used. Irradiations carried out at the highest laser intensity (10(14) W/cm(2)) and laser pulse count of 50 resulted in the creation of crater like damages with depth up to 20 mu m. Craters were conically shaped, implying intensive processes which took place at the surface. Generation of LIPSS as well as craters can be of great interest for contemporary technologies.",
journal = "Laser and Particle Beams",
title = "Surface modification of a-CN/TiAlN double layer coating on ASP 30 steel induced by femtosecond laser with 10(13)-10(14) W/cm(2) intensity in vacuum",
volume = "33",
number = "3",
pages = "551-559",
doi = "10.1017/S0263034615000610"
}

Trtica, M., Limpouch, J., Gavrilov, P. T., Gemini, L., Panjan, P., Stašić, J., Milovanović, D. S.,& Branković, G. O.. (2015). Surface modification of a-CN/TiAlN double layer coating on ASP 30 steel induced by femtosecond laser with 10(13)-10(14) W/cm(2) intensity in vacuum. in Laser and Particle Beams, 33(3), 551-559.
https://doi.org/10.1017/S0263034615000610

Trtica M, Limpouch J, Gavrilov PT, Gemini L, Panjan P, Stašić J, Milovanović DS, Branković GO. Surface modification of a-CN/TiAlN double layer coating on ASP 30 steel induced by femtosecond laser with 10(13)-10(14) W/cm(2) intensity in vacuum. in Laser and Particle Beams. 2015;33(3):551-559.
doi:10.1017/S0263034615000610 .

Trtica, Milan, Limpouch, Jiri, Gavrilov, Peter T., Gemini, L., Panjan, Peter, Stašić, Jelena, Milovanović, Dubravka S., Branković, Goran O., "Surface modification of a-CN/TiAlN double layer coating on ASP 30 steel induced by femtosecond laser with 10(13)-10(14) W/cm(2) intensity in vacuum" in Laser and Particle Beams, 33, no. 3 (2015):551-559,
https://doi.org/10.1017/S0263034615000610 . .

TY  - CONF
AU  - Savić, Slavica
AU  - Tadić, Marin
AU  - Jagličić, Zvonko
AU  - Mančić, Lidija
AU  - Vojisavljević, Katarina
AU  - Branković, Goran O.
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/742
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7524
AB  - Spinel materials based on Mn and Ni has been intensively studied over the past years due to their excellent semiconductor properties. Nickel manganite as NTC thermistor is widely used today in different industrial sectors. Here we report the complex polymerization method (CPM) for producing nickel manganite fine particles with a homogeneous distribution of constituent cations in the crystal lattice that ensures formation of dense monophased ceramic with the novel magnetic properties after been sintered in oxygen and air atmosphere. Phase composition of the synthesized materials was examined by XRPD, while the morphology of the powder and microstructure of ceramic were investigated using FESEM and SEM analyses, respectively. The magnetic properties of the samples have been studied by measuring the temperature and field dependence of magnetization. Magnetic measurements of M(T) reveal rather complex magnetic properties and multiple magnetic phase transitions. In the case of air atmosphere we found three magnetic phase transitions with transition temperatures at TM1=35 K, TM2=101 K and TM3=120 K. TM1 maximum is strongly dependent on the strength of the applied magnetic field (TM1 decreases with increasing applied field) whereas the TM3 is field independent The values of the coercivity, remanent magnetization and saturation magnetization at 100 K are: HC = 184 Oe, Mr = 1.92 emu/g and MS = 7.88 emu/g, respectively. The measured values at 5 K are HC = 1035 Oe, Mr = 7.70 emu/g and MS = 14.47 emu/g. Moreover, hysteresis properties measured after cooling of the sample in magnetic field show exchange bias effect with an exchange bias field |HEB=196 Oe. For the sample synthetized in oxygen atmosphere, the magnetization dependence of temperature M(T) and AC susceptibility data obtained from SQUID measurements clearly demonstrates that quadruple magnetic phase transitions can be readily detected at TM1~115 K, TM2~105 K, TM3~38 K and TM4~7 K. These findings suggest the novel magnetic transition for nickel manganite at low temperature TM4. The temperatures of observed maximums in χ’(T) and χ’’(T) parts of susceptibility are frequency independent, whereas the height of the peaks decreases with increasing frequency. The fact that TM4 does not shift with the increase of the frequency led us to the conclusion that there are no spin-glass/surface effect and/or blocking temperature/finite size effect connected to the NiMn2O4 ceramic. Therefore, the low-temperature peak TM4 in AC susceptibility is associated with ferromagnetic-like and antiferromagnetic-like magnetic transition in the interfacial FM/AFM internal structure. The exchange bias effect was found in a field cooled hysteresis loops at 5 K. The field cooling of the sample was under a magnetic field of 100 Oe and 10 kOe whereas the determined exchange bias fields were |HEB|=129 Oe and 182 Oe, respectively. The analysis of the results and comparison with literature data allowed us to conjecture that the mixed oxidation states of Mn ions and ferromagnetic and antiferromagnetic sublattice orders tailor these interesting magnetic properties.
PB  - Belgrade : Institute for Multidisciplinary Research
C3  - Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia
T1  - Magnetic properties of nickel manganite obtained by a complex polymerization method
SP  - 111
EP  - 112
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7524
ER  - 

@conference{
author = "Savić, Slavica and Tadić, Marin and Jagličić, Zvonko and Mančić, Lidija and Vojisavljević, Katarina and Branković, Goran O.",
year = "2015",
abstract = "Spinel materials based on Mn and Ni has been intensively studied over the past years due to their excellent semiconductor properties. Nickel manganite as NTC thermistor is widely used today in different industrial sectors. Here we report the complex polymerization method (CPM) for producing nickel manganite fine particles with a homogeneous distribution of constituent cations in the crystal lattice that ensures formation of dense monophased ceramic with the novel magnetic properties after been sintered in oxygen and air atmosphere. Phase composition of the synthesized materials was examined by XRPD, while the morphology of the powder and microstructure of ceramic were investigated using FESEM and SEM analyses, respectively. The magnetic properties of the samples have been studied by measuring the temperature and field dependence of magnetization. Magnetic measurements of M(T) reveal rather complex magnetic properties and multiple magnetic phase transitions. In the case of air atmosphere we found three magnetic phase transitions with transition temperatures at TM1=35 K, TM2=101 K and TM3=120 K. TM1 maximum is strongly dependent on the strength of the applied magnetic field (TM1 decreases with increasing applied field) whereas the TM3 is field independent The values of the coercivity, remanent magnetization and saturation magnetization at 100 K are: HC = 184 Oe, Mr = 1.92 emu/g and MS = 7.88 emu/g, respectively. The measured values at 5 K are HC = 1035 Oe, Mr = 7.70 emu/g and MS = 14.47 emu/g. Moreover, hysteresis properties measured after cooling of the sample in magnetic field show exchange bias effect with an exchange bias field |HEB=196 Oe. For the sample synthetized in oxygen atmosphere, the magnetization dependence of temperature M(T) and AC susceptibility data obtained from SQUID measurements clearly demonstrates that quadruple magnetic phase transitions can be readily detected at TM1~115 K, TM2~105 K, TM3~38 K and TM4~7 K. These findings suggest the novel magnetic transition for nickel manganite at low temperature TM4. The temperatures of observed maximums in χ’(T) and χ’’(T) parts of susceptibility are frequency independent, whereas the height of the peaks decreases with increasing frequency. The fact that TM4 does not shift with the increase of the frequency led us to the conclusion that there are no spin-glass/surface effect and/or blocking temperature/finite size effect connected to the NiMn2O4 ceramic. Therefore, the low-temperature peak TM4 in AC susceptibility is associated with ferromagnetic-like and antiferromagnetic-like magnetic transition in the interfacial FM/AFM internal structure. The exchange bias effect was found in a field cooled hysteresis loops at 5 K. The field cooling of the sample was under a magnetic field of 100 Oe and 10 kOe whereas the determined exchange bias fields were |HEB|=129 Oe and 182 Oe, respectively. The analysis of the results and comparison with literature data allowed us to conjecture that the mixed oxidation states of Mn ions and ferromagnetic and antiferromagnetic sublattice orders tailor these interesting magnetic properties.",
publisher = "Belgrade : Institute for Multidisciplinary Research",
journal = "Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia",
title = "Magnetic properties of nickel manganite obtained by a complex polymerization method",
pages = "111-112",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7524"
}

Savić, S., Tadić, M., Jagličić, Z., Mančić, L., Vojisavljević, K.,& Branković, G. O.. (2015). Magnetic properties of nickel manganite obtained by a complex polymerization method. in Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia
Belgrade : Institute for Multidisciplinary Research., 111-112.
https://hdl.handle.net/21.15107/rcub_vinar_7524

Savić S, Tadić M, Jagličić Z, Mančić L, Vojisavljević K, Branković GO. Magnetic properties of nickel manganite obtained by a complex polymerization method. in Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia. 2015;:111-112.
https://hdl.handle.net/21.15107/rcub_vinar_7524 .

Savić, Slavica, Tadić, Marin, Jagličić, Zvonko, Mančić, Lidija, Vojisavljević, Katarina, Branković, Goran O., "Magnetic properties of nickel manganite obtained by a complex polymerization method" in Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia (2015):111-112,
https://hdl.handle.net/21.15107/rcub_vinar_7524 .

TY  - JOUR
AU  - Radojkovic, A.
AU  - Savić, S. M.
AU  - Jović, Nataša G.
AU  - Ćirković, Jovana
AU  - Despotovic, Z.
AU  - Ribic, A.
AU  - Brankovic, Z.
AU  - Branković, Goran O.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/472
AB  - BaCe(0.9)Ee(0.1)O(2.95) (BCE) nanopowder was synthesized by citric-nitric autocombustion method. Rietveld refinement analysis showed that unit cell volume was slightly larger compared with the most known BaCe0.9Y0.1O2.95, which might contribute to higher proton mobility. Sinterability of BaCeO3 is also enhanced by doping with Eu, since dense single-phased BCE electrolyte microstructure comprising of 1-2mm grains was obtained after sintering at 1450 degrees C for 5 h. The electrochemical impedance spectroscopy (EIS) analysis revealed separate bulk and grain boundary contributions to the total electrolyte conductivity below 200 degrees C. The grain boundary conductivity was one to two orders of magnitude lower than the bulk conductivity, indicating blocking effect of the grain boundaries to the mobility of charge carriers. This effect diminished completely above 500 degrees C and only total conductivities were determined between 500 and 700 degrees C. Conductivity of BCE in a wet hydrogen atmosphere at 600 degrees C reached 1.2 x 10(-2) S/cm, which can be considered as one of the highest conductivities among BaCeO3 based proton conductors. (C) 2015 Elsevier Ltd. All rights reserved.
T2  - Electrochimica Acta
T1  - Structural and electrical properties of BaCe(0.9)Ee(0.1)O(2.95) electrolyte for IT-SOFCs
VL  - 161
SP  - 153
EP  - 158
DO  - 10.1016/j.electacta.2015.02.075
ER  - 

@article{
author = "Radojkovic, A. and Savić, S. M. and Jović, Nataša G. and Ćirković, Jovana and Despotovic, Z. and Ribic, A. and Brankovic, Z. and Branković, Goran O.",
year = "2015",
abstract = "BaCe(0.9)Ee(0.1)O(2.95) (BCE) nanopowder was synthesized by citric-nitric autocombustion method. Rietveld refinement analysis showed that unit cell volume was slightly larger compared with the most known BaCe0.9Y0.1O2.95, which might contribute to higher proton mobility. Sinterability of BaCeO3 is also enhanced by doping with Eu, since dense single-phased BCE electrolyte microstructure comprising of 1-2mm grains was obtained after sintering at 1450 degrees C for 5 h. The electrochemical impedance spectroscopy (EIS) analysis revealed separate bulk and grain boundary contributions to the total electrolyte conductivity below 200 degrees C. The grain boundary conductivity was one to two orders of magnitude lower than the bulk conductivity, indicating blocking effect of the grain boundaries to the mobility of charge carriers. This effect diminished completely above 500 degrees C and only total conductivities were determined between 500 and 700 degrees C. Conductivity of BCE in a wet hydrogen atmosphere at 600 degrees C reached 1.2 x 10(-2) S/cm, which can be considered as one of the highest conductivities among BaCeO3 based proton conductors. (C) 2015 Elsevier Ltd. All rights reserved.",
journal = "Electrochimica Acta",
title = "Structural and electrical properties of BaCe(0.9)Ee(0.1)O(2.95) electrolyte for IT-SOFCs",
volume = "161",
pages = "153-158",
doi = "10.1016/j.electacta.2015.02.075"
}

Radojkovic, A., Savić, S. M., Jović, N. G., Ćirković, J., Despotovic, Z., Ribic, A., Brankovic, Z.,& Branković, G. O.. (2015). Structural and electrical properties of BaCe(0.9)Ee(0.1)O(2.95) electrolyte for IT-SOFCs. in Electrochimica Acta, 161, 153-158.
https://doi.org/10.1016/j.electacta.2015.02.075

Radojkovic A, Savić SM, Jović NG, Ćirković J, Despotovic Z, Ribic A, Brankovic Z, Branković GO. Structural and electrical properties of BaCe(0.9)Ee(0.1)O(2.95) electrolyte for IT-SOFCs. in Electrochimica Acta. 2015;161:153-158.
doi:10.1016/j.electacta.2015.02.075 .

Radojkovic, A., Savić, S. M., Jović, Nataša G., Ćirković, Jovana, Despotovic, Z., Ribic, A., Brankovic, Z., Branković, Goran O., "Structural and electrical properties of BaCe(0.9)Ee(0.1)O(2.95) electrolyte for IT-SOFCs" in Electrochimica Acta, 161 (2015):153-158,
https://doi.org/10.1016/j.electacta.2015.02.075 . .

TY  - JOUR
AU  - Prekajski, Marija D.
AU  - Stojmenović, Marija
AU  - Radojkovic, A.
AU  - Branković, Goran O.
AU  - Oraon, H.
AU  - Subasri, R.
AU  - Matović, Branko
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/187
AB  - Solid solution Ce1-xBixO2-delta nanopowders with the composition of x = 0.1-0.5 were synthesized by using Self Propagating Room Temperature procedure (SPRT). The results obtained by XRPD show that synthesized samples were single-phase solid solution at room temperature. Powders were densified by using Conventional (CS) and Microwave (MS) Sintering techniques at different temperatures, in an air atmosphere for 1 h. Scanning electron microscopy (SEM) and complex impedance method measurements were carried out on sintered samples. Maximum achieved density was for sample with Ce0.80Bi0.20O2-delta composition for both applied sintering techniques. The highest conductivity was obtained for the ceramic composition Ce0.80Bi0.20O2-delta sintered by microwave technique at 700 degrees C. (C) 2014 Elsevier B.V. All rights reserved.
T2  - Journal of Alloys and Compounds
T1  - Sintering and electrical properties of Ce1-xBixO2-delta solid solution
VL  - 617
SP  - 563
EP  - 568
DO  - 10.1016/j.jallcom.2014.08.090
ER  - 

@article{
author = "Prekajski, Marija D. and Stojmenović, Marija and Radojkovic, A. and Branković, Goran O. and Oraon, H. and Subasri, R. and Matović, Branko",
year = "2014",
abstract = "Solid solution Ce1-xBixO2-delta nanopowders with the composition of x = 0.1-0.5 were synthesized by using Self Propagating Room Temperature procedure (SPRT). The results obtained by XRPD show that synthesized samples were single-phase solid solution at room temperature. Powders were densified by using Conventional (CS) and Microwave (MS) Sintering techniques at different temperatures, in an air atmosphere for 1 h. Scanning electron microscopy (SEM) and complex impedance method measurements were carried out on sintered samples. Maximum achieved density was for sample with Ce0.80Bi0.20O2-delta composition for both applied sintering techniques. The highest conductivity was obtained for the ceramic composition Ce0.80Bi0.20O2-delta sintered by microwave technique at 700 degrees C. (C) 2014 Elsevier B.V. All rights reserved.",
journal = "Journal of Alloys and Compounds",
title = "Sintering and electrical properties of Ce1-xBixO2-delta solid solution",
volume = "617",
pages = "563-568",
doi = "10.1016/j.jallcom.2014.08.090"
}

Prekajski, M. D., Stojmenović, M., Radojkovic, A., Branković, G. O., Oraon, H., Subasri, R.,& Matović, B.. (2014). Sintering and electrical properties of Ce1-xBixO2-delta solid solution. in Journal of Alloys and Compounds, 617, 563-568.
https://doi.org/10.1016/j.jallcom.2014.08.090

Prekajski MD, Stojmenović M, Radojkovic A, Branković GO, Oraon H, Subasri R, Matović B. Sintering and electrical properties of Ce1-xBixO2-delta solid solution. in Journal of Alloys and Compounds. 2014;617:563-568.
doi:10.1016/j.jallcom.2014.08.090 .

Prekajski, Marija D., Stojmenović, Marija, Radojkovic, A., Branković, Goran O., Oraon, H., Subasri, R., Matović, Branko, "Sintering and electrical properties of Ce1-xBixO2-delta solid solution" in Journal of Alloys and Compounds, 617 (2014):563-568,
https://doi.org/10.1016/j.jallcom.2014.08.090 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Vastag, Djendji Dj.
AU  - Maksimović, Vesna
AU  - Branković, Goran O.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6093
AB  - Lead powder obtained by potentiostatic electrodeposition from alkaline electrolyte, based on hydroxide ions, was investigated. The shape of lead crystals strongly depends on overpotentials of electrodeposition. The regular crystals are formed in the ohmic control. The shape of dendrites formed in the control of diffusion has a function of overpotentials of the electrodeposition. Increasing overpotential leads to branching of dendrites from primary type to those with developed tertiary branches. Formation of the very branchy dendrites of the strong (111) preferred orientation is explained on the basis of the affiliation of this electrolyte to the group of the complex Pb electrolytes.
T2  - Transactions of Nonferrous Metals Society of China
T1  - Morphological and crystallographic characteristics of lead powder obtained by electrodeposition from an environmentally friendly electrolyte
VL  - 24
IS  - 3
SP  - 884
EP  - 892
DO  - 10.1016/S1003-6326(14)63139-3
ER  - 

@article{
author = "Nikolić, Nebojša D. and Vastag, Djendji Dj. and Maksimović, Vesna and Branković, Goran O.",
year = "2014",
abstract = "Lead powder obtained by potentiostatic electrodeposition from alkaline electrolyte, based on hydroxide ions, was investigated. The shape of lead crystals strongly depends on overpotentials of electrodeposition. The regular crystals are formed in the ohmic control. The shape of dendrites formed in the control of diffusion has a function of overpotentials of the electrodeposition. Increasing overpotential leads to branching of dendrites from primary type to those with developed tertiary branches. Formation of the very branchy dendrites of the strong (111) preferred orientation is explained on the basis of the affiliation of this electrolyte to the group of the complex Pb electrolytes.",
journal = "Transactions of Nonferrous Metals Society of China",
title = "Morphological and crystallographic characteristics of lead powder obtained by electrodeposition from an environmentally friendly electrolyte",
volume = "24",
number = "3",
pages = "884-892",
doi = "10.1016/S1003-6326(14)63139-3"
}

Nikolić, N. D., Vastag, D. Dj., Maksimović, V.,& Branković, G. O.. (2014). Morphological and crystallographic characteristics of lead powder obtained by electrodeposition from an environmentally friendly electrolyte. in Transactions of Nonferrous Metals Society of China, 24(3), 884-892.
https://doi.org/10.1016/S1003-6326(14)63139-3

Nikolić ND, Vastag DD, Maksimović V, Branković GO. Morphological and crystallographic characteristics of lead powder obtained by electrodeposition from an environmentally friendly electrolyte. in Transactions of Nonferrous Metals Society of China. 2014;24(3):884-892.
doi:10.1016/S1003-6326(14)63139-3 .

Nikolić, Nebojša D., Vastag, Djendji Dj., Maksimović, Vesna, Branković, Goran O., "Morphological and crystallographic characteristics of lead powder obtained by electrodeposition from an environmentally friendly electrolyte" in Transactions of Nonferrous Metals Society of China, 24, no. 3 (2014):884-892,
https://doi.org/10.1016/S1003-6326(14)63139-3 . .

TY  - JOUR
AU  - Savić, S. M.
AU  - Tadić, Marin
AU  - Jagličić, Zvonko
AU  - Vojisavljevic, K.
AU  - Mančić, Lidija
AU  - Branković, Goran O.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/186
AB  - Structural, electrical and magnetic properties of nickel manganite ceramics obtained by sintering fine powders prepared by a complex polymerization method are given in this work. The phase composition of the synthesized material was examined by x-ray powder diffraction (XRPD). Field-emission scanning electron microscopy (FE-SEM) was used to analyze the obtained powder morphology. Scanning electron microscopy (SEM) was used to analyze the microstructure of sintered ceramics. The activation energy of conduction E-a and the coefficient of temperature sensitivity B-25/100 were calculated from direct current (DC) resistivity measurements. The magnetization dependence of temperature M(T) and alternating current (AC) susceptibility data obtained from SQUID measurements clearly demonstrate that quadruple magnetic phase transitions can be readily detected at T-M1 similar to 115 K, T-M2 similar to 105 K, T-M3 similar to 38 K and T-M4 similar to 7 K. These findings suggest a novel magnetic transition for nickel manganite at low temperature T-M4. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Structural, electrical and magnetic properties of nickel manganite obtained by a complex polymerization method
VL  - 40
IS  - 10
SP  - 15515
EP  - 15521
DO  - 10.1016/j.ceramint.2014.07.024
ER  - 

@article{
author = "Savić, S. M. and Tadić, Marin and Jagličić, Zvonko and Vojisavljevic, K. and Mančić, Lidija and Branković, Goran O.",
year = "2014",
abstract = "Structural, electrical and magnetic properties of nickel manganite ceramics obtained by sintering fine powders prepared by a complex polymerization method are given in this work. The phase composition of the synthesized material was examined by x-ray powder diffraction (XRPD). Field-emission scanning electron microscopy (FE-SEM) was used to analyze the obtained powder morphology. Scanning electron microscopy (SEM) was used to analyze the microstructure of sintered ceramics. The activation energy of conduction E-a and the coefficient of temperature sensitivity B-25/100 were calculated from direct current (DC) resistivity measurements. The magnetization dependence of temperature M(T) and alternating current (AC) susceptibility data obtained from SQUID measurements clearly demonstrate that quadruple magnetic phase transitions can be readily detected at T-M1 similar to 115 K, T-M2 similar to 105 K, T-M3 similar to 38 K and T-M4 similar to 7 K. These findings suggest a novel magnetic transition for nickel manganite at low temperature T-M4. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Structural, electrical and magnetic properties of nickel manganite obtained by a complex polymerization method",
volume = "40",
number = "10",
pages = "15515-15521",
doi = "10.1016/j.ceramint.2014.07.024"
}

Savić, S. M., Tadić, M., Jagličić, Z., Vojisavljevic, K., Mančić, L.,& Branković, G. O.. (2014). Structural, electrical and magnetic properties of nickel manganite obtained by a complex polymerization method. in Ceramics International, 40(10), 15515-15521.
https://doi.org/10.1016/j.ceramint.2014.07.024

Savić SM, Tadić M, Jagličić Z, Vojisavljevic K, Mančić L, Branković GO. Structural, electrical and magnetic properties of nickel manganite obtained by a complex polymerization method. in Ceramics International. 2014;40(10):15515-15521.
doi:10.1016/j.ceramint.2014.07.024 .

Savić, S. M., Tadić, Marin, Jagličić, Zvonko, Vojisavljevic, K., Mančić, Lidija, Branković, Goran O., "Structural, electrical and magnetic properties of nickel manganite obtained by a complex polymerization method" in Ceramics International, 40, no. 10 (2014):15515-15521,
https://doi.org/10.1016/j.ceramint.2014.07.024 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Maksimović, Vesna
AU  - Branković, Goran O.
AU  - Živković, Predrag M.
AU  - Pavlović, Miomir G.
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5732
AB  - Lead electrodeposition processes from basic (nitrate) and complex (acetate) electrolytes were mutually compared by scanning electron microscopy and X-ray diffraction investigation of the produced powder particles. The shape of dendritic particles strongly depended on the type of electrolyte. Dendrites composed of a stalk and weakly developed primary branches (the primary type) were predominantly formed from the basic electrolyte. Ramified dendrites composed of a stalk and of both primary and secondary branches (the secondary type) were mainly formed from the complex electrolyte. In both types of powder particles, Pb crystallites were predominantly oriented in the (111) plane. The formation of powder particles of different shapes with strong (111) preferred orientation is discussed and explained by consideration of the general characteristics of the growth of crystals in electrocrystallization processes.
T2  - Journal of the Serbian Chemical Society
T1  - Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles
VL  - 78
IS  - 9
SP  - 1387
EP  - 1395
DO  - 10.2298/JSC130211034N
ER  - 

@article{
author = "Nikolić, Nebojša D. and Maksimović, Vesna and Branković, Goran O. and Živković, Predrag M. and Pavlović, Miomir G.",
year = "2013",
abstract = "Lead electrodeposition processes from basic (nitrate) and complex (acetate) electrolytes were mutually compared by scanning electron microscopy and X-ray diffraction investigation of the produced powder particles. The shape of dendritic particles strongly depended on the type of electrolyte. Dendrites composed of a stalk and weakly developed primary branches (the primary type) were predominantly formed from the basic electrolyte. Ramified dendrites composed of a stalk and of both primary and secondary branches (the secondary type) were mainly formed from the complex electrolyte. In both types of powder particles, Pb crystallites were predominantly oriented in the (111) plane. The formation of powder particles of different shapes with strong (111) preferred orientation is discussed and explained by consideration of the general characteristics of the growth of crystals in electrocrystallization processes.",
journal = "Journal of the Serbian Chemical Society",
title = "Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles",
volume = "78",
number = "9",
pages = "1387-1395",
doi = "10.2298/JSC130211034N"
}

Nikolić, N. D., Maksimović, V., Branković, G. O., Živković, P. M.,& Pavlović, M. G.. (2013). Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles. in Journal of the Serbian Chemical Society, 78(9), 1387-1395.
https://doi.org/10.2298/JSC130211034N

Nikolić ND, Maksimović V, Branković GO, Živković PM, Pavlović MG. Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles. in Journal of the Serbian Chemical Society. 2013;78(9):1387-1395.
doi:10.2298/JSC130211034N .

Nikolić, Nebojša D., Maksimović, Vesna, Branković, Goran O., Živković, Predrag M., Pavlović, Miomir G., "Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles" in Journal of the Serbian Chemical Society, 78, no. 9 (2013):1387-1395,
https://doi.org/10.2298/JSC130211034N . .

TY  - JOUR
AU  - Nikolic, Nebojsa. D.
AU  - Maksimović, Vesna
AU  - Branković, Goran O.
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5488
AB  - Electrodeposition of lead from a concentrated nitrate solution was examined by scanning electron microscopy (SEM) and by X-ray diffraction (XRD) analysis of the obtained powder particles. Single crystals of the (111) preferred orientation were formed at a low overpotential by ohmic controlled electrodeposition. Irregular crystals, needle-like and fern-like dendrites, predominantly of the (111) preferred orientation, were formed at high overpotentials (the diffusion control of the electrodeposition). The ratio of Pb crystallites oriented in the (200), (220), (311) and (331) planes increased with increasing electrodeposition overpotential. The correlation between the morphologies and crystallographic structures of the lead deposits was discussed by the consideration of general characteristics of growth layers in electrodeposition processes.
T2  - RSC Advances
T1  - Morphological and crystallographic characteristics of electrodeposited lead from a concentrated electrolyte
VL  - 3
IS  - 20
SP  - 7466
EP  - 7471
DO  - 10.1039/c3ra41183d
ER  - 

@article{
author = "Nikolic, Nebojsa. D. and Maksimović, Vesna and Branković, Goran O.",
year = "2013",
abstract = "Electrodeposition of lead from a concentrated nitrate solution was examined by scanning electron microscopy (SEM) and by X-ray diffraction (XRD) analysis of the obtained powder particles. Single crystals of the (111) preferred orientation were formed at a low overpotential by ohmic controlled electrodeposition. Irregular crystals, needle-like and fern-like dendrites, predominantly of the (111) preferred orientation, were formed at high overpotentials (the diffusion control of the electrodeposition). The ratio of Pb crystallites oriented in the (200), (220), (311) and (331) planes increased with increasing electrodeposition overpotential. The correlation between the morphologies and crystallographic structures of the lead deposits was discussed by the consideration of general characteristics of growth layers in electrodeposition processes.",
journal = "RSC Advances",
title = "Morphological and crystallographic characteristics of electrodeposited lead from a concentrated electrolyte",
volume = "3",
number = "20",
pages = "7466-7471",
doi = "10.1039/c3ra41183d"
}

Nikolic, Nebojsa. D., Maksimović, V.,& Branković, G. O.. (2013). Morphological and crystallographic characteristics of electrodeposited lead from a concentrated electrolyte. in RSC Advances, 3(20), 7466-7471.
https://doi.org/10.1039/c3ra41183d

Nikolic ND, Maksimović V, Branković GO. Morphological and crystallographic characteristics of electrodeposited lead from a concentrated electrolyte. in RSC Advances. 2013;3(20):7466-7471.
doi:10.1039/c3ra41183d .

Nikolic, Nebojsa. D., Maksimović, Vesna, Branković, Goran O., "Morphological and crystallographic characteristics of electrodeposited lead from a concentrated electrolyte" in RSC Advances, 3, no. 20 (2013):7466-7471,
https://doi.org/10.1039/c3ra41183d . .

TY  - JOUR
AU  - Devečerski, Aleksandar
AU  - Pošarac, Milica B.
AU  - Dimitrijević, Marija M.
AU  - Rosić, Milena
AU  - Volkov-Husović, Tatjana
AU  - Branković, Goran O.
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5468
AB  - The silicon carbide powders are prepared by carbothermal reduction of domestic mineral resources (white and brown sepiolite), at relatively low temperatures (1200 - 1600 degrees C). Carbothermal reduction process is greatly influenced by chemical composition of sepiolites and type of carbon used. Obtained SiC powders consist of fine beta-SiC particles and did not retain the fibrous morphology of sepiolites. Catalytical influence of Fe is attributed to formation of iron-silicide and its potentionaly important role in removal of Mg-species, i.e. reduction of Mg2SiO4 and MgO into Mg-(g).
T2  - Science of Sintering
T1  - SiC Synthesis Using Natural Mg-Silicates
VL  - 44
IS  - 1
SP  - 81
EP  - 94
DO  - 10.2298/SOS1201081D
ER  - 

@article{
author = "Devečerski, Aleksandar and Pošarac, Milica B. and Dimitrijević, Marija M. and Rosić, Milena and Volkov-Husović, Tatjana and Branković, Goran O.",
year = "2012",
abstract = "The silicon carbide powders are prepared by carbothermal reduction of domestic mineral resources (white and brown sepiolite), at relatively low temperatures (1200 - 1600 degrees C). Carbothermal reduction process is greatly influenced by chemical composition of sepiolites and type of carbon used. Obtained SiC powders consist of fine beta-SiC particles and did not retain the fibrous morphology of sepiolites. Catalytical influence of Fe is attributed to formation of iron-silicide and its potentionaly important role in removal of Mg-species, i.e. reduction of Mg2SiO4 and MgO into Mg-(g).",
journal = "Science of Sintering",
title = "SiC Synthesis Using Natural Mg-Silicates",
volume = "44",
number = "1",
pages = "81-94",
doi = "10.2298/SOS1201081D"
}

Devečerski, A., Pošarac, M. B., Dimitrijević, M. M., Rosić, M., Volkov-Husović, T.,& Branković, G. O.. (2012). SiC Synthesis Using Natural Mg-Silicates. in Science of Sintering, 44(1), 81-94.
https://doi.org/10.2298/SOS1201081D

Devečerski A, Pošarac MB, Dimitrijević MM, Rosić M, Volkov-Husović T, Branković GO. SiC Synthesis Using Natural Mg-Silicates. in Science of Sintering. 2012;44(1):81-94.
doi:10.2298/SOS1201081D .

Devečerski, Aleksandar, Pošarac, Milica B., Dimitrijević, Marija M., Rosić, Milena, Volkov-Husović, Tatjana, Branković, Goran O., "SiC Synthesis Using Natural Mg-Silicates" in Science of Sintering, 44, no. 1 (2012):81-94,
https://doi.org/10.2298/SOS1201081D . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Branković, Goran O.
AU  - Maksimović, Vesna
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4629
AB  - The effect of the regime of pulsating current (PC) on copper electrodeposition in the hydrogen co-deposition range was examined by the techniques of scanning electron and optical microscopes. The quantities of evolved hydrogen and morphologies of electrodeposited copper strongly depended on the applied parameters of square waves PC, such as the current density amplitude (or the amplitude of the cathodic current density), deposition pulse, and pause duration. The increase of the current density amplitude led to intensification of hydrogen evolution reaction, and the change of morphology of electrodeposited copper from dendrites and shallow holes to dish-like holes was observed. For the constant pause duration, the prolonging deposition pulses intensify hydrogen evolution reaction leading to the formation of the honeycomb-like structures. The set of modified equations considering the effect of hydrogen generated during metal electrodeposition processes by the pulsating current regime is also presented. The concept of effective overpotential amplitude was proposed to explain the change of copper surface morphology with the intensification of hydrogen evolution reaction.
T2  - Journal of Solid State Electrochemistry
T1  - Morphology and internal structure of copper deposits electrodeposited by the pulsating current regime in the hydrogen co-deposition range
VL  - 16
IS  - 1
SP  - 321
EP  - 328
DO  - 10.1007/s10008-011-1331-x
ER  - 

@article{
author = "Nikolić, Nebojša D. and Branković, Goran O. and Maksimović, Vesna",
year = "2012",
abstract = "The effect of the regime of pulsating current (PC) on copper electrodeposition in the hydrogen co-deposition range was examined by the techniques of scanning electron and optical microscopes. The quantities of evolved hydrogen and morphologies of electrodeposited copper strongly depended on the applied parameters of square waves PC, such as the current density amplitude (or the amplitude of the cathodic current density), deposition pulse, and pause duration. The increase of the current density amplitude led to intensification of hydrogen evolution reaction, and the change of morphology of electrodeposited copper from dendrites and shallow holes to dish-like holes was observed. For the constant pause duration, the prolonging deposition pulses intensify hydrogen evolution reaction leading to the formation of the honeycomb-like structures. The set of modified equations considering the effect of hydrogen generated during metal electrodeposition processes by the pulsating current regime is also presented. The concept of effective overpotential amplitude was proposed to explain the change of copper surface morphology with the intensification of hydrogen evolution reaction.",
journal = "Journal of Solid State Electrochemistry",
title = "Morphology and internal structure of copper deposits electrodeposited by the pulsating current regime in the hydrogen co-deposition range",
volume = "16",
number = "1",
pages = "321-328",
doi = "10.1007/s10008-011-1331-x"
}

Nikolić, N. D., Branković, G. O.,& Maksimović, V.. (2012). Morphology and internal structure of copper deposits electrodeposited by the pulsating current regime in the hydrogen co-deposition range. in Journal of Solid State Electrochemistry, 16(1), 321-328.
https://doi.org/10.1007/s10008-011-1331-x

Nikolić ND, Branković GO, Maksimović V. Morphology and internal structure of copper deposits electrodeposited by the pulsating current regime in the hydrogen co-deposition range. in Journal of Solid State Electrochemistry. 2012;16(1):321-328.
doi:10.1007/s10008-011-1331-x .

Nikolić, Nebojša D., Branković, Goran O., Maksimović, Vesna, "Morphology and internal structure of copper deposits electrodeposited by the pulsating current regime in the hydrogen co-deposition range" in Journal of Solid State Electrochemistry, 16, no. 1 (2012):321-328,
https://doi.org/10.1007/s10008-011-1331-x . .

TY  - CONF
AU  - Pavlović, Vera P.
AU  - Pavlović, Vladimir B.
AU  - Blanuša, Jovan
AU  - Branković, Goran O.
AU  - Spreitzer, Matjaž
AU  - Krstić, Jelena
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/527
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7470
AB  - In order to obtain nanocrystalline material which can be used in MLCC production, the investigations of the influence of BaTiO3 powder tribophysical activation (TPA) on its structural changes, dielectric and ferroelectric properties have been performed. Microstructure development and crystal structure have been studied by mercury porosimetry method, SEM, EDS and X-ray powder diffraction analyses. The modifications of dielectric and ferroelectric properties of sintered samples have been examined and correlated with observed structural changes induced by TPA of starting powders. It has been found that dielectric and ferroelectric properties of tribophysically activated BaTiO3 could be tuned by controlling the grain size and lattice strain of activated nanostructured material.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : 1st Serbian Ceramic Society Conference : program and the book of abstracts; May 10-11, 2012; Belgrade
T1  - Structural Changes, Dielectric and Ferroelectric Properties of Tribophysically Activated BaTiO3
SP  - 25
EP  - 25
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7470
ER  - 

@conference{
author = "Pavlović, Vera P. and Pavlović, Vladimir B. and Blanuša, Jovan and Branković, Goran O. and Spreitzer, Matjaž and Krstić, Jelena",
year = "2012",
abstract = "In order to obtain nanocrystalline material which can be used in MLCC production, the investigations of the influence of BaTiO3 powder tribophysical activation (TPA) on its structural changes, dielectric and ferroelectric properties have been performed. Microstructure development and crystal structure have been studied by mercury porosimetry method, SEM, EDS and X-ray powder diffraction analyses. The modifications of dielectric and ferroelectric properties of sintered samples have been examined and correlated with observed structural changes induced by TPA of starting powders. It has been found that dielectric and ferroelectric properties of tribophysically activated BaTiO3 could be tuned by controlling the grain size and lattice strain of activated nanostructured material.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : 1st Serbian Ceramic Society Conference : program and the book of abstracts; May 10-11, 2012; Belgrade",
title = "Structural Changes, Dielectric and Ferroelectric Properties of Tribophysically Activated BaTiO3",
pages = "25-25",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7470"
}

Pavlović, V. P., Pavlović, V. B., Blanuša, J., Branković, G. O., Spreitzer, M.,& Krstić, J.. (2012). Structural Changes, Dielectric and Ferroelectric Properties of Tribophysically Activated BaTiO3. in Advanced Ceramics and Application : 1st Serbian Ceramic Society Conference : program and the book of abstracts; May 10-11, 2012; Belgrade
Belgrade : Serbian Ceramic Society., 25-25.
https://hdl.handle.net/21.15107/rcub_vinar_7470

Pavlović VP, Pavlović VB, Blanuša J, Branković GO, Spreitzer M, Krstić J. Structural Changes, Dielectric and Ferroelectric Properties of Tribophysically Activated BaTiO3. in Advanced Ceramics and Application : 1st Serbian Ceramic Society Conference : program and the book of abstracts; May 10-11, 2012; Belgrade. 2012;:25-25.
https://hdl.handle.net/21.15107/rcub_vinar_7470 .

Pavlović, Vera P., Pavlović, Vladimir B., Blanuša, Jovan, Branković, Goran O., Spreitzer, Matjaž, Krstić, Jelena, "Structural Changes, Dielectric and Ferroelectric Properties of Tribophysically Activated BaTiO3" in Advanced Ceramics and Application : 1st Serbian Ceramic Society Conference : program and the book of abstracts; May 10-11, 2012; Belgrade (2012):25-25,
https://hdl.handle.net/21.15107/rcub_vinar_7470 .

TY  - JOUR
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Radović-Bogdanović, I.
AU  - Branković, Goran O.
AU  - Čekada, Miha
AU  - Gaković, Biljana M.
AU  - Jaksic, M.
AU  - Trtica, Milan
AU  - Milosavljević, Momir
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4912
AB  - In this work we studied the influence of laser radiation on the composition, structure and morphology of WTi thin films deposited on n-type (100) silicon wafers. The films were deposited by d.c. sputtering from a 70:30 at% W-Ti target, using Ar ions, to a thickness of similar to 190 nm. Irradiation was performed with a pulsed Nd:YAG laser operating at 1064 nm, whereas the pulse duration was 150 ps. Laser fluences of 3.2 and 5.9 J/cm(2) were found to be sufficient for modification of the WTi/silicon target system. The results show: (i) ablation of WTi thin film and a Si substrate in the central zone of spots, (ii) appearance of hydrodynamic features like resolidified material, (iii) partial ablation of the WTi thin film at the periphery and (iv) appearance of thin film cracks at the far periphery. On the non-ablated areas, the laser modification induced changes in composition, such as inter-mixing of components at the WTi/Si interface with formation of silicides in both metals. Surface oxidation was the dominant process in the ablated areas, which is demonstrated by the presence of a SiO2 phase.
T2  - Metals and Materials International
T1  - Evaluation of the composition and morphology of a WTi/Si system processed by a picosecond laser
VL  - 18
IS  - 3
SP  - 457
EP  - 463
DO  - 10.1007/s12540-012-3012-4
ER  - 

@article{
author = "Petrović, Suzana and Peruško, Davor and Radović-Bogdanović, I. and Branković, Goran O. and Čekada, Miha and Gaković, Biljana M. and Jaksic, M. and Trtica, Milan and Milosavljević, Momir",
year = "2012",
abstract = "In this work we studied the influence of laser radiation on the composition, structure and morphology of WTi thin films deposited on n-type (100) silicon wafers. The films were deposited by d.c. sputtering from a 70:30 at% W-Ti target, using Ar ions, to a thickness of similar to 190 nm. Irradiation was performed with a pulsed Nd:YAG laser operating at 1064 nm, whereas the pulse duration was 150 ps. Laser fluences of 3.2 and 5.9 J/cm(2) were found to be sufficient for modification of the WTi/silicon target system. The results show: (i) ablation of WTi thin film and a Si substrate in the central zone of spots, (ii) appearance of hydrodynamic features like resolidified material, (iii) partial ablation of the WTi thin film at the periphery and (iv) appearance of thin film cracks at the far periphery. On the non-ablated areas, the laser modification induced changes in composition, such as inter-mixing of components at the WTi/Si interface with formation of silicides in both metals. Surface oxidation was the dominant process in the ablated areas, which is demonstrated by the presence of a SiO2 phase.",
journal = "Metals and Materials International",
title = "Evaluation of the composition and morphology of a WTi/Si system processed by a picosecond laser",
volume = "18",
number = "3",
pages = "457-463",
doi = "10.1007/s12540-012-3012-4"
}

Petrović, S., Peruško, D., Radović-Bogdanović, I., Branković, G. O., Čekada, M., Gaković, B. M., Jaksic, M., Trtica, M.,& Milosavljević, M.. (2012). Evaluation of the composition and morphology of a WTi/Si system processed by a picosecond laser. in Metals and Materials International, 18(3), 457-463.
https://doi.org/10.1007/s12540-012-3012-4

Petrović S, Peruško D, Radović-Bogdanović I, Branković GO, Čekada M, Gaković BM, Jaksic M, Trtica M, Milosavljević M. Evaluation of the composition and morphology of a WTi/Si system processed by a picosecond laser. in Metals and Materials International. 2012;18(3):457-463.
doi:10.1007/s12540-012-3012-4 .

Petrović, Suzana, Peruško, Davor, Radović-Bogdanović, I., Branković, Goran O., Čekada, Miha, Gaković, Biljana M., Jaksic, M., Trtica, Milan, Milosavljević, Momir, "Evaluation of the composition and morphology of a WTi/Si system processed by a picosecond laser" in Metals and Materials International, 18, no. 3 (2012):457-463,
https://doi.org/10.1007/s12540-012-3012-4 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Branković, Goran O.
AU  - Maksimović, Vesna
PY  - 2011
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4584
AB  - In this study, the effect of the anodic current density in the regime of reversing current (RC) on the quantity of evolved hydrogen and morphology of copper deposits was considered. The quantity of evolved hydrogen was quantified by the determination of the average current efficiency for hydrogen evolution reaction, while morphology and internal structures of electrodeposited copper were analyzed using scanning electron (SEM) and optical microscopy techniques, respectively. In all RC experiments, the cathodic current density of 440 mA/cm(2), cathodic pulse of 10 ms and anodic pulse of 5 ms were applied, while the analyzed anodic current densities were: 40, 240, 440 and 640 mA/cm(2). The number, size and shape of holes formed of detached hydrogen bubbles strongly depended on the selected parameters of square waves RC. Due to the decrease of the quantity of evolved hydrogen with the increasing anodic current density, the change of morphology of copper deposits formed around holes from cauliflower-like agglomerates of copper grains to dendrites was observed. Honeycomb-like structures were formed with the anodic current density values up to 440 mA/cm(2). The compactness of the honeycomb-like structures increased with the increase of the anodic current density. The improvement of structural characteristics of the honeycomb-like electrodes was achieved by the application of the RC regime in comparison with both the pulsating current (PC) and constant galvanostatic regimes. It was found that the regime of reversing current is superior in the production of the honeycomb-like electrodes in relation to other current regimes of electrolysis. (C) 2011 Elsevier B.V. All rights reserved.
T2  - Journal of Electroanalytical Chemistry
T1  - Effect of the anodic current density on copper electrodeposition in the hydrogen co-deposition range by the reversing current (RC) regime
VL  - 661
IS  - 2
SP  - 309
EP  - 316
DO  - 10.1016/j.jelechem.2011.08.006
ER  - 

@article{
author = "Nikolić, Nebojša D. and Branković, Goran O. and Maksimović, Vesna",
year = "2011",
abstract = "In this study, the effect of the anodic current density in the regime of reversing current (RC) on the quantity of evolved hydrogen and morphology of copper deposits was considered. The quantity of evolved hydrogen was quantified by the determination of the average current efficiency for hydrogen evolution reaction, while morphology and internal structures of electrodeposited copper were analyzed using scanning electron (SEM) and optical microscopy techniques, respectively. In all RC experiments, the cathodic current density of 440 mA/cm(2), cathodic pulse of 10 ms and anodic pulse of 5 ms were applied, while the analyzed anodic current densities were: 40, 240, 440 and 640 mA/cm(2). The number, size and shape of holes formed of detached hydrogen bubbles strongly depended on the selected parameters of square waves RC. Due to the decrease of the quantity of evolved hydrogen with the increasing anodic current density, the change of morphology of copper deposits formed around holes from cauliflower-like agglomerates of copper grains to dendrites was observed. Honeycomb-like structures were formed with the anodic current density values up to 440 mA/cm(2). The compactness of the honeycomb-like structures increased with the increase of the anodic current density. The improvement of structural characteristics of the honeycomb-like electrodes was achieved by the application of the RC regime in comparison with both the pulsating current (PC) and constant galvanostatic regimes. It was found that the regime of reversing current is superior in the production of the honeycomb-like electrodes in relation to other current regimes of electrolysis. (C) 2011 Elsevier B.V. All rights reserved.",
journal = "Journal of Electroanalytical Chemistry",
title = "Effect of the anodic current density on copper electrodeposition in the hydrogen co-deposition range by the reversing current (RC) regime",
volume = "661",
number = "2",
pages = "309-316",
doi = "10.1016/j.jelechem.2011.08.006"
}

Nikolić, N. D., Branković, G. O.,& Maksimović, V.. (2011). Effect of the anodic current density on copper electrodeposition in the hydrogen co-deposition range by the reversing current (RC) regime. in Journal of Electroanalytical Chemistry, 661(2), 309-316.
https://doi.org/10.1016/j.jelechem.2011.08.006

Nikolić ND, Branković GO, Maksimović V. Effect of the anodic current density on copper electrodeposition in the hydrogen co-deposition range by the reversing current (RC) regime. in Journal of Electroanalytical Chemistry. 2011;661(2):309-316.
doi:10.1016/j.jelechem.2011.08.006 .

Nikolić, Nebojša D., Branković, Goran O., Maksimović, Vesna, "Effect of the anodic current density on copper electrodeposition in the hydrogen co-deposition range by the reversing current (RC) regime" in Journal of Electroanalytical Chemistry, 661, no. 2 (2011):309-316,
https://doi.org/10.1016/j.jelechem.2011.08.006 . .

TY  - JOUR
AU  - Bošković, Snežana B.
AU  - Zec, Slavica
AU  - Branković, Goran O.
AU  - Brankovic, Z.
AU  - Devečerski, Aleksandar
AU  - Matović, Branko
AU  - Aldinger, Fritz
PY  - 2010
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/3855
AB  - Multiply doped ceria nanopowders were synthesized by applying MGNP (modified glycine/nitrate procedure). The overall concentration of dopants was kept constant (x = 0.2) whereby Gd ion as the main dopant was gradually substituted by Sm and by Sm + Y. The compositions of solid solutions were calculated by applying defect model introducing anion vacancy radius. Characterization of powders involved BET, TEM, XRD and chemical analyses. Densification was performed at 1500 degrees C, in an oxygen atmosphere for 1 h. The results showed that with increasing number of dopants, specific surface area of powders increased, followed by decrease of crystallite and grain sizes. Densification degree was also found to rise with increasing number of dopants. According to impedance measurements it was found that ionic conductivity was the highest 1.14 x 10(-3) S cm(-1) at 450 degrees C in sample doped with Gd, Sm and Y simultaneously. (C) 2009 Elsevier Ltd and Techna Group S.r.l. All fights reserved.
T2  - Ceramics International
T1  - Preparation, sintering and electrical properties of nano-grained multidoped ceria
VL  - 36
IS  - 1
SP  - 121
EP  - 127
DO  - 10.1016/j.ceramint.2009.07.015
ER  - 

@article{
author = "Bošković, Snežana B. and Zec, Slavica and Branković, Goran O. and Brankovic, Z. and Devečerski, Aleksandar and Matović, Branko and Aldinger, Fritz",
year = "2010",
abstract = "Multiply doped ceria nanopowders were synthesized by applying MGNP (modified glycine/nitrate procedure). The overall concentration of dopants was kept constant (x = 0.2) whereby Gd ion as the main dopant was gradually substituted by Sm and by Sm + Y. The compositions of solid solutions were calculated by applying defect model introducing anion vacancy radius. Characterization of powders involved BET, TEM, XRD and chemical analyses. Densification was performed at 1500 degrees C, in an oxygen atmosphere for 1 h. The results showed that with increasing number of dopants, specific surface area of powders increased, followed by decrease of crystallite and grain sizes. Densification degree was also found to rise with increasing number of dopants. According to impedance measurements it was found that ionic conductivity was the highest 1.14 x 10(-3) S cm(-1) at 450 degrees C in sample doped with Gd, Sm and Y simultaneously. (C) 2009 Elsevier Ltd and Techna Group S.r.l. All fights reserved.",
journal = "Ceramics International",
title = "Preparation, sintering and electrical properties of nano-grained multidoped ceria",
volume = "36",
number = "1",
pages = "121-127",
doi = "10.1016/j.ceramint.2009.07.015"
}

Bošković, S. B., Zec, S., Branković, G. O., Brankovic, Z., Devečerski, A., Matović, B.,& Aldinger, F.. (2010). Preparation, sintering and electrical properties of nano-grained multidoped ceria. in Ceramics International, 36(1), 121-127.
https://doi.org/10.1016/j.ceramint.2009.07.015

Bošković SB, Zec S, Branković GO, Brankovic Z, Devečerski A, Matović B, Aldinger F. Preparation, sintering and electrical properties of nano-grained multidoped ceria. in Ceramics International. 2010;36(1):121-127.
doi:10.1016/j.ceramint.2009.07.015 .

Bošković, Snežana B., Zec, Slavica, Branković, Goran O., Brankovic, Z., Devečerski, Aleksandar, Matović, Branko, Aldinger, Fritz, "Preparation, sintering and electrical properties of nano-grained multidoped ceria" in Ceramics International, 36, no. 1 (2010):121-127,
https://doi.org/10.1016/j.ceramint.2009.07.015 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Branković, Goran O.
AU  - Maksimović, Vesna
AU  - Pavlović, Miomir G.
AU  - Popov, K. I.
PY  - 2010
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/3833
AB  - Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a strong effect on the morphology of electrodeposited copper. Honeycomb-like copper structures were formed with the pause-to-pulse ratios up to 5. Up to this value of the pause-to-pulse ratio, the diameter of the holes formed by attached hydrogen bubbles was decreasing, while their number was increasing by the application of PO regime. The compactness of the formed honeycomb-like structures was also increasing with the increasing pause duration. The increase of the pause-to-pulse ratio suppressed a coalescence of neighboring hydrogen bubbles. Copper dendrites in the interior of the holes and at their shoulders were formed with the higher pause-to-pulse ratios. The size of the formed dendrites, as well as their number, increased with the increasing pause duration. Depth of holes was decreasing with the increasing pause duration. The increased compactness of the obtained structures was explained by the use of a set of equations describing the effect of square-wave PO on electrodeposition process.
T2  - Journal of Solid State Electrochemistry
T1  - Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition
VL  - 14
IS  - 2
SP  - 331
EP  - 338
DO  - 10.1007/s10008-009-0842-1
ER  - 

@article{
author = "Nikolić, Nebojša D. and Branković, Goran O. and Maksimović, Vesna and Pavlović, Miomir G. and Popov, K. I.",
year = "2010",
abstract = "Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a strong effect on the morphology of electrodeposited copper. Honeycomb-like copper structures were formed with the pause-to-pulse ratios up to 5. Up to this value of the pause-to-pulse ratio, the diameter of the holes formed by attached hydrogen bubbles was decreasing, while their number was increasing by the application of PO regime. The compactness of the formed honeycomb-like structures was also increasing with the increasing pause duration. The increase of the pause-to-pulse ratio suppressed a coalescence of neighboring hydrogen bubbles. Copper dendrites in the interior of the holes and at their shoulders were formed with the higher pause-to-pulse ratios. The size of the formed dendrites, as well as their number, increased with the increasing pause duration. Depth of holes was decreasing with the increasing pause duration. The increased compactness of the obtained structures was explained by the use of a set of equations describing the effect of square-wave PO on electrodeposition process.",
journal = "Journal of Solid State Electrochemistry",
title = "Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition",
volume = "14",
number = "2",
pages = "331-338",
doi = "10.1007/s10008-009-0842-1"
}

Nikolić, N. D., Branković, G. O., Maksimović, V., Pavlović, M. G.,& Popov, K. I.. (2010). Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition. in Journal of Solid State Electrochemistry, 14(2), 331-338.
https://doi.org/10.1007/s10008-009-0842-1

Nikolić ND, Branković GO, Maksimović V, Pavlović MG, Popov KI. Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition. in Journal of Solid State Electrochemistry. 2010;14(2):331-338.
doi:10.1007/s10008-009-0842-1 .

Nikolić, Nebojša D., Branković, Goran O., Maksimović, Vesna, Pavlović, Miomir G., Popov, K. I., "Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition" in Journal of Solid State Electrochemistry, 14, no. 2 (2010):331-338,
https://doi.org/10.1007/s10008-009-0842-1 . .

TY  - JOUR
AU  - Stašić, Jelena
AU  - Trtica, Milan
AU  - Gaković, Biljana M.
AU  - Batani, Dimitri
AU  - Desai, T.
AU  - Branković, Goran O.
PY  - 2009
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/3738
AB  - Interaction of Nd:YAG laser, operating at 266 nm wavelength and a pulse duration of 40 ps, with AISI 1045 steel was studied. Surface damage threshold was estimated to be 0.14 J/cm(2). The steel surface modi. cation was studied at the laser fluence of similar to 1.0 J/cm(2). The energy absorbed from Nd: YAG laser beam is partially converted to thermal energy, which generates a series of effects, such as melting, vaporization of the molten material, shock waves, etc. The following AISI 1045 steel surface morphological changes and processes were observed: (i) intensive damage of the target in the central zone of irradiated area; (ii) appearance of periodic surface structures at nano-level, with periodicity in agreement with the used wavelength; (iii) reduction of oxygen concentration in irradiated area; and (iv) development of plasma in front of the target. Generally, interaction of laser beam with AISI 1045 steel (at 266 nm) results in a near-instantaneous creation of damage, meaning that large steel surfaces can be modified in short times. (C) 2009 Elsevier B. V. All rights reserved.
T2  - Applied Surface Science
T1  - Modifications of AISI 1045 steel by picosecond Nd:YAG laser at 266 nm; comparison with 532 and 1064 nm pulses
VL  - 255
IS  - 19
SP  - 8221
EP  - 8225
DO  - 10.1016/j.apsusc.2009.05.049
ER  - 

@article{
author = "Stašić, Jelena and Trtica, Milan and Gaković, Biljana M. and Batani, Dimitri and Desai, T. and Branković, Goran O.",
year = "2009",
abstract = "Interaction of Nd:YAG laser, operating at 266 nm wavelength and a pulse duration of 40 ps, with AISI 1045 steel was studied. Surface damage threshold was estimated to be 0.14 J/cm(2). The steel surface modi. cation was studied at the laser fluence of similar to 1.0 J/cm(2). The energy absorbed from Nd: YAG laser beam is partially converted to thermal energy, which generates a series of effects, such as melting, vaporization of the molten material, shock waves, etc. The following AISI 1045 steel surface morphological changes and processes were observed: (i) intensive damage of the target in the central zone of irradiated area; (ii) appearance of periodic surface structures at nano-level, with periodicity in agreement with the used wavelength; (iii) reduction of oxygen concentration in irradiated area; and (iv) development of plasma in front of the target. Generally, interaction of laser beam with AISI 1045 steel (at 266 nm) results in a near-instantaneous creation of damage, meaning that large steel surfaces can be modified in short times. (C) 2009 Elsevier B. V. All rights reserved.",
journal = "Applied Surface Science",
title = "Modifications of AISI 1045 steel by picosecond Nd:YAG laser at 266 nm; comparison with 532 and 1064 nm pulses",
volume = "255",
number = "19",
pages = "8221-8225",
doi = "10.1016/j.apsusc.2009.05.049"
}

Stašić, J., Trtica, M., Gaković, B. M., Batani, D., Desai, T.,& Branković, G. O.. (2009). Modifications of AISI 1045 steel by picosecond Nd:YAG laser at 266 nm; comparison with 532 and 1064 nm pulses. in Applied Surface Science, 255(19), 8221-8225.
https://doi.org/10.1016/j.apsusc.2009.05.049

Stašić J, Trtica M, Gaković BM, Batani D, Desai T, Branković GO. Modifications of AISI 1045 steel by picosecond Nd:YAG laser at 266 nm; comparison with 532 and 1064 nm pulses. in Applied Surface Science. 2009;255(19):8221-8225.
doi:10.1016/j.apsusc.2009.05.049 .

Stašić, Jelena, Trtica, Milan, Gaković, Biljana M., Batani, Dimitri, Desai, T., Branković, Goran O., "Modifications of AISI 1045 steel by picosecond Nd:YAG laser at 266 nm; comparison with 532 and 1064 nm pulses" in Applied Surface Science, 255, no. 19 (2009):8221-8225,
https://doi.org/10.1016/j.apsusc.2009.05.049 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Branković, Goran O.
AU  - Maksimović, Vesna
AU  - Pavlović, Miomir G.
AU  - Popov, Konstantin I.
PY  - 2009
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/3819
AB  - Electrodeposition of copper by pulsating overpotential (PO) regime in the hydrogen co-deposition range was examined by the determination of the average current efficiency of hydrogen evolution and by microscopic analysis of the morphology of the formed deposits. The techniques of scanning electron microscopy (SEM) and optical microscopy were used for the structural analysis of the copper deposits. Honeycomb-like electrodes were formed with an amplitude overpotential of 1000 mV, a pause of 10 ms, and deposition pulses of 3, 5, 10 and 20 ms. Holes formed by attached hydrogen bubbles were surrounded by dendrites (for deposition pulses of 3 and 5 ms) or agglomerates of copper grains (for 10 and 20 ms). In an interval of deposition pulses between 3 and 10 ms, the length of deposition pulse did not affect the size, number and depth of holes. The change of morphology of copper formed around holes was discussed by the effect of quantity of evolved hydrogen on effectiveness of stirring of solution in the near-electrode layer. The application of square-wave PO with the shorter deposition pulses enabled energy savings in the production of such copper electrodes. For example, the applied deposition pulse of 3 ms enabled energy saving of about 15% in relation to the copper electrode obtained with a deposition pulse of 10 ms (for the unchanged number, size and depth of holes). (C) 2009 Elsevier B.V. All rights reserved.
T2  - Journal of Electroanalytical Chemistry
T1  - Influence of potential pulse conditions on the formation of honeycomb-like copper electrodes
VL  - 635
IS  - 2
SP  - 111
EP  - 119
DO  - 10.1016/j.jelechem.2009.08.005
ER  - 

@article{
author = "Nikolić, Nebojša D. and Branković, Goran O. and Maksimović, Vesna and Pavlović, Miomir G. and Popov, Konstantin I.",
year = "2009",
abstract = "Electrodeposition of copper by pulsating overpotential (PO) regime in the hydrogen co-deposition range was examined by the determination of the average current efficiency of hydrogen evolution and by microscopic analysis of the morphology of the formed deposits. The techniques of scanning electron microscopy (SEM) and optical microscopy were used for the structural analysis of the copper deposits. Honeycomb-like electrodes were formed with an amplitude overpotential of 1000 mV, a pause of 10 ms, and deposition pulses of 3, 5, 10 and 20 ms. Holes formed by attached hydrogen bubbles were surrounded by dendrites (for deposition pulses of 3 and 5 ms) or agglomerates of copper grains (for 10 and 20 ms). In an interval of deposition pulses between 3 and 10 ms, the length of deposition pulse did not affect the size, number and depth of holes. The change of morphology of copper formed around holes was discussed by the effect of quantity of evolved hydrogen on effectiveness of stirring of solution in the near-electrode layer. The application of square-wave PO with the shorter deposition pulses enabled energy savings in the production of such copper electrodes. For example, the applied deposition pulse of 3 ms enabled energy saving of about 15% in relation to the copper electrode obtained with a deposition pulse of 10 ms (for the unchanged number, size and depth of holes). (C) 2009 Elsevier B.V. All rights reserved.",
journal = "Journal of Electroanalytical Chemistry",
title = "Influence of potential pulse conditions on the formation of honeycomb-like copper electrodes",
volume = "635",
number = "2",
pages = "111-119",
doi = "10.1016/j.jelechem.2009.08.005"
}

Nikolić, N. D., Branković, G. O., Maksimović, V., Pavlović, M. G.,& Popov, K. I.. (2009). Influence of potential pulse conditions on the formation of honeycomb-like copper electrodes. in Journal of Electroanalytical Chemistry, 635(2), 111-119.
https://doi.org/10.1016/j.jelechem.2009.08.005

Nikolić ND, Branković GO, Maksimović V, Pavlović MG, Popov KI. Influence of potential pulse conditions on the formation of honeycomb-like copper electrodes. in Journal of Electroanalytical Chemistry. 2009;635(2):111-119.
doi:10.1016/j.jelechem.2009.08.005 .

Nikolić, Nebojša D., Branković, Goran O., Maksimović, Vesna, Pavlović, Miomir G., Popov, Konstantin I., "Influence of potential pulse conditions on the formation of honeycomb-like copper electrodes" in Journal of Electroanalytical Chemistry, 635, no. 2 (2009):111-119,
https://doi.org/10.1016/j.jelechem.2009.08.005 . .