TY  - JOUR
AU  - Elhmali, Houda Taher
AU  - Stajčić, Ivana
AU  - Stajčić, Aleksandar
AU  - Pešić, Ivan
AU  - Jovanović, Marija
AU  - Petrović, Miloš
AU  - Radojević, Vesna
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12718
AB  - While dental poly methyl methacrylate(PMMA) possesses distinctive qualities such as ease of fabrication, cost-effectiveness, and favorable physical and mechanical properties, these attributes alone are inadequate to impart the necessary impact strength and hardness. Consequently, pure PMMA is less suitable for dental applications. This research focused on the incorporation of Strontium titanate (SrTiO3-STO) and hybrid filler STO/Manganese oxide (MnO2) to improve impact resistance and hardness. The potential of STO in reinforcing PMMA is poorly investigated, while hybrid filler STO/MnO2 has not been presented yet. Differential scanning calorimetry is conducted in order to investigate the agglomeration influence on the PMMA glass transition temperature (Tg), as well as the leaching of residual monomer and volatile additives that could pose a threat to human health. It has been determined that agglomeration with 1 wt% loading had no influence on Tg, while the first scan revealed differences in evaporation of small molecules, in favor of composite PMMA-STO/MnO2, which showed the trapping potential of volatiles. Investigations of mechanical properties have revealed the significant influence of hybrid STO/MnO2 filler on microhardness and total absorbed impact energy, which were increased by 89.9% and 145.4%, respectively. Results presented in this study revealed the reinforcing potential of hybrid nanoparticles that could find application in other polymers as well.
T2  - Polymers
T1  - Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior
VL  - 16
IS  - 2
SP  - 278
DO  - 10.3390/polym16020278
ER  - 

@article{
author = "Elhmali, Houda Taher and Stajčić, Ivana and Stajčić, Aleksandar and Pešić, Ivan and Jovanović, Marija and Petrović, Miloš and Radojević, Vesna",
year = "2024",
abstract = "While dental poly methyl methacrylate(PMMA) possesses distinctive qualities such as ease of fabrication, cost-effectiveness, and favorable physical and mechanical properties, these attributes alone are inadequate to impart the necessary impact strength and hardness. Consequently, pure PMMA is less suitable for dental applications. This research focused on the incorporation of Strontium titanate (SrTiO3-STO) and hybrid filler STO/Manganese oxide (MnO2) to improve impact resistance and hardness. The potential of STO in reinforcing PMMA is poorly investigated, while hybrid filler STO/MnO2 has not been presented yet. Differential scanning calorimetry is conducted in order to investigate the agglomeration influence on the PMMA glass transition temperature (Tg), as well as the leaching of residual monomer and volatile additives that could pose a threat to human health. It has been determined that agglomeration with 1 wt% loading had no influence on Tg, while the first scan revealed differences in evaporation of small molecules, in favor of composite PMMA-STO/MnO2, which showed the trapping potential of volatiles. Investigations of mechanical properties have revealed the significant influence of hybrid STO/MnO2 filler on microhardness and total absorbed impact energy, which were increased by 89.9% and 145.4%, respectively. Results presented in this study revealed the reinforcing potential of hybrid nanoparticles that could find application in other polymers as well.",
journal = "Polymers",
title = "Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior",
volume = "16",
number = "2",
pages = "278",
doi = "10.3390/polym16020278"
}

Elhmali, H. T., Stajčić, I., Stajčić, A., Pešić, I., Jovanović, M., Petrović, M.,& Radojević, V.. (2024). Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior. in Polymers, 16(2), 278.
https://doi.org/10.3390/polym16020278

Elhmali HT, Stajčić I, Stajčić A, Pešić I, Jovanović M, Petrović M, Radojević V. Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior. in Polymers. 2024;16(2):278.
doi:10.3390/polym16020278 .

Elhmali, Houda Taher, Stajčić, Ivana, Stajčić, Aleksandar, Pešić, Ivan, Jovanović, Marija, Petrović, Miloš, Radojević, Vesna, "Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior" in Polymers, 16, no. 2 (2024):278,
https://doi.org/10.3390/polym16020278 . .

TY  - JOUR
AU  - Alazreg, Asma
AU  - Vuksanović, Marija M.
AU  - Egelja, Adela
AU  - Mladenović, Ivana O.
AU  - Radovanović, Željko
AU  - Petrović, Miloš
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11392
AB  - Acrylate polymers are used in several applications such as dentistry, medicine, and industry. The modification of their properties using the reinforcement is of key importance for the possible applications. Layered double hydroxides are materials that are easily synthesized by several techniques giving the possibility to modulate the chemical composition and morphology of the reinforcement and they consist of a divalent and a trivalent anion hydroxide and the layers can be exfoliated and thus provide a material interesting for composite reinforcement. In this paper, Mn was used as a divalent and Al as a trivalent cation. The obtained particles were used as reinforcement for the preparation of composites in 1, 3, and 5 wt% quantities and prepared samples were compared to the matrix consisting of PMMA. Physical mechanical properties of the sample having the best mechanical properties (with 3 wt% of MnAl-LDH filers) exhibited 6.38% modulus of elasticity, 27% hardness, and 10% tensile strength improved values compared to the clear PMMA matrix. Toughness was lowered in this sort of composite compared to the pure matrix. Highlights: MnAl-LDH-PMMA composites improved modulus, strength, hardness Loss of toughness is tolerable for 3 wt% reinforcement Viscoelastic properties are improved for composites compared to matrix.
T2  - Polymer Composites
T1  - Mechanical properties of acrylate matrix composite reinforced with manganese‐aluminum layered double hydroxide
DO  - 10.1002/pc.27597
ER  - 

@article{
author = "Alazreg, Asma and Vuksanović, Marija M. and Egelja, Adela and Mladenović, Ivana O. and Radovanović, Željko and Petrović, Miloš and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2023",
abstract = "Acrylate polymers are used in several applications such as dentistry, medicine, and industry. The modification of their properties using the reinforcement is of key importance for the possible applications. Layered double hydroxides are materials that are easily synthesized by several techniques giving the possibility to modulate the chemical composition and morphology of the reinforcement and they consist of a divalent and a trivalent anion hydroxide and the layers can be exfoliated and thus provide a material interesting for composite reinforcement. In this paper, Mn was used as a divalent and Al as a trivalent cation. The obtained particles were used as reinforcement for the preparation of composites in 1, 3, and 5 wt% quantities and prepared samples were compared to the matrix consisting of PMMA. Physical mechanical properties of the sample having the best mechanical properties (with 3 wt% of MnAl-LDH filers) exhibited 6.38% modulus of elasticity, 27% hardness, and 10% tensile strength improved values compared to the clear PMMA matrix. Toughness was lowered in this sort of composite compared to the pure matrix. Highlights: MnAl-LDH-PMMA composites improved modulus, strength, hardness Loss of toughness is tolerable for 3 wt% reinforcement Viscoelastic properties are improved for composites compared to matrix.",
journal = "Polymer Composites",
title = "Mechanical properties of acrylate matrix composite reinforced with manganese‐aluminum layered double hydroxide",
doi = "10.1002/pc.27597"
}

Alazreg, A., Vuksanović, M. M., Egelja, A., Mladenović, I. O., Radovanović, Ž., Petrović, M., Marinković, A.,& Jančić-Heinemann, R.. (2023). Mechanical properties of acrylate matrix composite reinforced with manganese‐aluminum layered double hydroxide. in Polymer Composites.
https://doi.org/10.1002/pc.27597

Alazreg A, Vuksanović MM, Egelja A, Mladenović IO, Radovanović Ž, Petrović M, Marinković A, Jančić-Heinemann R. Mechanical properties of acrylate matrix composite reinforced with manganese‐aluminum layered double hydroxide. in Polymer Composites. 2023;.
doi:10.1002/pc.27597 .

Alazreg, Asma, Vuksanović, Marija M., Egelja, Adela, Mladenović, Ivana O., Radovanović, Željko, Petrović, Miloš, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Mechanical properties of acrylate matrix composite reinforced with manganese‐aluminum layered double hydroxide" in Polymer Composites (2023),
https://doi.org/10.1002/pc.27597 . .

TY  - JOUR
AU  - Stajčić, Ivana
AU  - Veljković, Filip
AU  - Petrović, Miloš
AU  - Veličković, Suzana
AU  - Radojević, Vesna
AU  - Vlahović, Branislav
AU  - Stajčić, Aleksandar
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11093
AB  - High performance polymers with bio-based modifiers are promising materials in terms of applications and environmental impact. In this work, raw acacia honey was used as a bio-modifier for epoxy resin, as a rich source of functional groups. The addition of honey resulted in the formation of highly stable structures that were observed in scanning electron microscopy images as separate phases at the fracture surface, which were involved in the toughening of the resin. Structural changes were investigated, revealing the formation of a new aldehyde carbonyl group. Thermal analysis confirmed the formation of products that were stable up to 600 °C, with a glass transition temperature of 228 °C. An energy-controlled impact test was performed to compare the absorbed impact energy of bio-modified epoxy containing different amounts of honey with unmodified epoxy resin. The results showed that bio-modified epoxy resin with 3 wt% of acacia honey could withstand several impacts with full recovery, while unmodified epoxy resin broke at first impact. The absorbed energy at first impact was 2.5 times higher for bio-modified epoxy resin than it was for unmodified epoxy resin. In this manner, by using simple preparation and a raw material that is abundant in nature, a novel epoxy with high thermal and impact resistance was obtained, opening a path for further research in this field.
T2  - Polymers
T1  - Impact- and Thermal-Resistant Epoxy Resin Toughened with Acacia Honey
VL  - 15
IS  - 10
SP  - 2261
DO  - 10.3390/polym15102261
ER  - 

@article{
author = "Stajčić, Ivana and Veljković, Filip and Petrović, Miloš and Veličković, Suzana and Radojević, Vesna and Vlahović, Branislav and Stajčić, Aleksandar",
year = "2023",
abstract = "High performance polymers with bio-based modifiers are promising materials in terms of applications and environmental impact. In this work, raw acacia honey was used as a bio-modifier for epoxy resin, as a rich source of functional groups. The addition of honey resulted in the formation of highly stable structures that were observed in scanning electron microscopy images as separate phases at the fracture surface, which were involved in the toughening of the resin. Structural changes were investigated, revealing the formation of a new aldehyde carbonyl group. Thermal analysis confirmed the formation of products that were stable up to 600 °C, with a glass transition temperature of 228 °C. An energy-controlled impact test was performed to compare the absorbed impact energy of bio-modified epoxy containing different amounts of honey with unmodified epoxy resin. The results showed that bio-modified epoxy resin with 3 wt% of acacia honey could withstand several impacts with full recovery, while unmodified epoxy resin broke at first impact. The absorbed energy at first impact was 2.5 times higher for bio-modified epoxy resin than it was for unmodified epoxy resin. In this manner, by using simple preparation and a raw material that is abundant in nature, a novel epoxy with high thermal and impact resistance was obtained, opening a path for further research in this field.",
journal = "Polymers",
title = "Impact- and Thermal-Resistant Epoxy Resin Toughened with Acacia Honey",
volume = "15",
number = "10",
pages = "2261",
doi = "10.3390/polym15102261"
}

Stajčić, I., Veljković, F., Petrović, M., Veličković, S., Radojević, V., Vlahović, B.,& Stajčić, A.. (2023). Impact- and Thermal-Resistant Epoxy Resin Toughened with Acacia Honey. in Polymers, 15(10), 2261.
https://doi.org/10.3390/polym15102261

Stajčić I, Veljković F, Petrović M, Veličković S, Radojević V, Vlahović B, Stajčić A. Impact- and Thermal-Resistant Epoxy Resin Toughened with Acacia Honey. in Polymers. 2023;15(10):2261.
doi:10.3390/polym15102261 .

Stajčić, Ivana, Veljković, Filip, Petrović, Miloš, Veličković, Suzana, Radojević, Vesna, Vlahović, Branislav, Stajčić, Aleksandar, "Impact- and Thermal-Resistant Epoxy Resin Toughened with Acacia Honey" in Polymers, 15, no. 10 (2023):2261,
https://doi.org/10.3390/polym15102261 . .

TY  - JOUR
AU  - Obradović, Vera
AU  - Vuksanović, Marija M.
AU  - Tomić, Nataša
AU  - Petrović, Miloš
AU  - Marinković, Aleksandar
AU  - Stojanović, Dušica
AU  - Radojević, Vesna
AU  - Jančić-Heinemann, Radmila
AU  - Uskoković, Petar
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10337
AB  - This study presents the impact properties of the new form of hybrid thermoplastic composites. The Kolon fabrics were impregnated with the 10 wt% poly (vinyl butyral) (PVB)/ethanol solution with the addition of silica (SiO2) particles originating from rice husk or layered double hydroxide modified silica particles (FeAl-LDH@SiO2) as reinforcement. All the composites consisted of one layer of the impregnated fabric where the silica particles concentrations were 0.5 wt% and 1.0 wt% regarding PVB. The impact properties of the composite samples were analyzed by the controlled energy puncture impact tester. The structures of the composite samples were determined by the attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) and field emission scanning electron microscopy (FE-SEM). The results showed that the Kolon/PVB/1 wt% FeAl-LDH@SiO2 sample yielded the maximum impact force.
T2  - Materials Letters
T1  - Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles
VL  - 324
SP  - 132668
DO  - 10.1016/j.matlet.2022.132668
ER  - 

@article{
author = "Obradović, Vera and Vuksanović, Marija M. and Tomić, Nataša and Petrović, Miloš and Marinković, Aleksandar and Stojanović, Dušica and Radojević, Vesna and Jančić-Heinemann, Radmila and Uskoković, Petar",
year = "2022",
abstract = "This study presents the impact properties of the new form of hybrid thermoplastic composites. The Kolon fabrics were impregnated with the 10 wt% poly (vinyl butyral) (PVB)/ethanol solution with the addition of silica (SiO2) particles originating from rice husk or layered double hydroxide modified silica particles (FeAl-LDH@SiO2) as reinforcement. All the composites consisted of one layer of the impregnated fabric where the silica particles concentrations were 0.5 wt% and 1.0 wt% regarding PVB. The impact properties of the composite samples were analyzed by the controlled energy puncture impact tester. The structures of the composite samples were determined by the attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) and field emission scanning electron microscopy (FE-SEM). The results showed that the Kolon/PVB/1 wt% FeAl-LDH@SiO2 sample yielded the maximum impact force.",
journal = "Materials Letters",
title = "Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles",
volume = "324",
pages = "132668",
doi = "10.1016/j.matlet.2022.132668"
}

Obradović, V., Vuksanović, M. M., Tomić, N., Petrović, M., Marinković, A., Stojanović, D., Radojević, V., Jančić-Heinemann, R.,& Uskoković, P.. (2022). Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles. in Materials Letters, 324, 132668.
https://doi.org/10.1016/j.matlet.2022.132668

Obradović V, Vuksanović MM, Tomić N, Petrović M, Marinković A, Stojanović D, Radojević V, Jančić-Heinemann R, Uskoković P. Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles. in Materials Letters. 2022;324:132668.
doi:10.1016/j.matlet.2022.132668 .

Obradović, Vera, Vuksanović, Marija M., Tomić, Nataša, Petrović, Miloš, Marinković, Aleksandar, Stojanović, Dušica, Radojević, Vesna, Jančić-Heinemann, Radmila, Uskoković, Petar, "Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles" in Materials Letters, 324 (2022):132668,
https://doi.org/10.1016/j.matlet.2022.132668 . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana O.
AU  - Tomić, Nataša Z.
AU  - Petrović, Miloš
AU  - Radojević, Vesna J.
AU  - Marinković, Aleksandar D.
AU  - Jančić-Heinemann, Radmila
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10340
AB  - Rice husk was used to produce silica particles, which were then used to reinforce the polymer matrix. The synthesized SiO2 particles were characterized using X-ray diffraction, Fourier transforms infrared spectroscopy (FTIR) and scanning electron microscopy with EDS. In a PMMA matrix, prepared SiO2 particles in amounts of 1, 3, and 5 wt.% were used as reinforcing agents. The goal of this research was to see if SiO2 particles had any effect on the mechanical properties of polymer composite materials. The morphology of the composites was examined using a field emission scanning electron microscope (FE-SEM). Vickers microindentation hardness and impact testing were used to determine the mechanical properties of the obtained composites. The indentation creep’s behavior of a polymethylmetacrylate (PMMA) composite material with varying amounts of nanoparticles (SiO2) was investigated and analyzed.
T2  - Science of Sintering
T1  - Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material
VL  - 54
IS  - 2
SP  - 211
EP  - 221
DO  - 10.2298/SOS2202211V
ER  - 

@article{
author = "Vuksanović, Marija M. and Mladenović, Ivana O. and Tomić, Nataša Z. and Petrović, Miloš and Radojević, Vesna J. and Marinković, Aleksandar D. and Jančić-Heinemann, Radmila",
year = "2022",
abstract = "Rice husk was used to produce silica particles, which were then used to reinforce the polymer matrix. The synthesized SiO2 particles were characterized using X-ray diffraction, Fourier transforms infrared spectroscopy (FTIR) and scanning electron microscopy with EDS. In a PMMA matrix, prepared SiO2 particles in amounts of 1, 3, and 5 wt.% were used as reinforcing agents. The goal of this research was to see if SiO2 particles had any effect on the mechanical properties of polymer composite materials. The morphology of the composites was examined using a field emission scanning electron microscope (FE-SEM). Vickers microindentation hardness and impact testing were used to determine the mechanical properties of the obtained composites. The indentation creep’s behavior of a polymethylmetacrylate (PMMA) composite material with varying amounts of nanoparticles (SiO2) was investigated and analyzed.",
journal = "Science of Sintering",
title = "Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material",
volume = "54",
number = "2",
pages = "211-221",
doi = "10.2298/SOS2202211V"
}

Vuksanović, M. M., Mladenović, I. O., Tomić, N. Z., Petrović, M., Radojević, V. J., Marinković, A. D.,& Jančić-Heinemann, R.. (2022). Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material. in Science of Sintering, 54(2), 211-221.
https://doi.org/10.2298/SOS2202211V

Vuksanović MM, Mladenović IO, Tomić NZ, Petrović M, Radojević VJ, Marinković AD, Jančić-Heinemann R. Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material. in Science of Sintering. 2022;54(2):211-221.
doi:10.2298/SOS2202211V .

Vuksanović, Marija M., Mladenović, Ivana O., Tomić, Nataša Z., Petrović, Miloš, Radojević, Vesna J., Marinković, Aleksandar D., Jančić-Heinemann, Radmila, "Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material" in Science of Sintering, 54, no. 2 (2022):211-221,
https://doi.org/10.2298/SOS2202211V . .

TY  - JOUR
AU  - Pešić, Ivan
AU  - Petrović, Miloš
AU  - Vuksanović, Marija M.
AU  - Popović, Maja
AU  - Rabasović, Maja
AU  - Šević, Dragutin
AU  - Radojević, Vesna
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10668
AB  - Processing and characterization of PMMA-MXene composites were investigated. γ-Methacryloxypropyltrimethoxy (MEMO) silane was used to modify the surface of MXenes and improve the compatibility between MXenes and the polymer. The FTIR analysis revealed the formation of a chemical bond between MXene and MEMO silane, while the XPS analysis confirmed the presence of silicon in the functionalized MXene. PMMA composites with non-functionalized and functionalized MXene were prepared using a solution casting method. Tensile tests showed that, compared to neat PMMA, Young’s modulus increased in both composites by 22.1 and 27.6%, respectively. As a result of coupling between the PMMA matrix and the surface-modified MXenes, the tensile strength also increased by about 37%. In addition, optical spectroscopy showed higher absorption for the composite with surface-modified MXenes and short-lived fluorescence with emission intensity sensitive to the crumpling of functionalized MXene nanosheets.
T2  - Nanocomposites
T1  - Structural, optical and mechanical characterization of PMMA- MXene composites functionalized with MEMO silane
VL  - 8
IS  - 1
SP  - 215
EP  - 226
DO  - 10.1080/20550324.2023.2168844
ER  - 

@article{
author = "Pešić, Ivan and Petrović, Miloš and Vuksanović, Marija M. and Popović, Maja and Rabasović, Maja and Šević, Dragutin and Radojević, Vesna",
year = "2022",
abstract = "Processing and characterization of PMMA-MXene composites were investigated. γ-Methacryloxypropyltrimethoxy (MEMO) silane was used to modify the surface of MXenes and improve the compatibility between MXenes and the polymer. The FTIR analysis revealed the formation of a chemical bond between MXene and MEMO silane, while the XPS analysis confirmed the presence of silicon in the functionalized MXene. PMMA composites with non-functionalized and functionalized MXene were prepared using a solution casting method. Tensile tests showed that, compared to neat PMMA, Young’s modulus increased in both composites by 22.1 and 27.6%, respectively. As a result of coupling between the PMMA matrix and the surface-modified MXenes, the tensile strength also increased by about 37%. In addition, optical spectroscopy showed higher absorption for the composite with surface-modified MXenes and short-lived fluorescence with emission intensity sensitive to the crumpling of functionalized MXene nanosheets.",
journal = "Nanocomposites",
title = "Structural, optical and mechanical characterization of PMMA- MXene composites functionalized with MEMO silane",
volume = "8",
number = "1",
pages = "215-226",
doi = "10.1080/20550324.2023.2168844"
}

Pešić, I., Petrović, M., Vuksanović, M. M., Popović, M., Rabasović, M., Šević, D.,& Radojević, V.. (2022). Structural, optical and mechanical characterization of PMMA- MXene composites functionalized with MEMO silane. in Nanocomposites, 8(1), 215-226.
https://doi.org/10.1080/20550324.2023.2168844

Pešić I, Petrović M, Vuksanović MM, Popović M, Rabasović M, Šević D, Radojević V. Structural, optical and mechanical characterization of PMMA- MXene composites functionalized with MEMO silane. in Nanocomposites. 2022;8(1):215-226.
doi:10.1080/20550324.2023.2168844 .

Pešić, Ivan, Petrović, Miloš, Vuksanović, Marija M., Popović, Maja, Rabasović, Maja, Šević, Dragutin, Radojević, Vesna, "Structural, optical and mechanical characterization of PMMA- MXene composites functionalized with MEMO silane" in Nanocomposites, 8, no. 1 (2022):215-226,
https://doi.org/10.1080/20550324.2023.2168844 . .

Jančić Heinemann, R., Vuksanović, M. M., Tomić, N., Petrović, M., Spasojević, P., Radišić, M., Radojević, V., Trifunović, D.,& Marinković, A.. (2018). Kompozitni materijali na bazi PMMA modifikovan dimetil itakonatom sa poboljšanom žilavosti i smanjenom količinom zaostalog monomera. .
https://hdl.handle.net/21.15107/rcub_vinar_13003

Jančić Heinemann R, Vuksanović MM, Tomić N, Petrović M, Spasojević P, Radišić M, Radojević V, Trifunović D, Marinković A. Kompozitni materijali na bazi PMMA modifikovan dimetil itakonatom sa poboljšanom žilavosti i smanjenom količinom zaostalog monomera. 2018;.
https://hdl.handle.net/21.15107/rcub_vinar_13003 .

Jančić Heinemann, Radmila, Vuksanović, Marija M., Tomić, Nataša, Petrović, Miloš, Spasojević, Pavle, Radišić, Marina, Radojević, Vesna, Trifunović, Dejan, Marinković, Aleksandar, "Kompozitni materijali na bazi PMMA modifikovan dimetil itakonatom sa poboljšanom žilavosti i smanjenom količinom zaostalog monomera" (2018),
https://hdl.handle.net/21.15107/rcub_vinar_13003 .