TY  - JOUR
AU  - Janković, Bojan Ž.
AU  - Manić, Nebojša G.
AU  - Dodevski, Vladimir
AU  - Popović, Jasmina G.
AU  - Rusmirović, Jelena D.
AU  - Tošić, Miloš S.
PY  - 2019
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0016236118317770
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7925
AB  - This paper describes the pyrolysis of Poplar fluff (from Populus alba) using on-line apparatus, and carbonization process at 850 °C using the fixed bed reactor. Characteristics of pyrolysis products were examined. Elemental and chemical analyses were shown that Poplar fluff has higher energy content characterized by increased content of fibrous structure (particularly cellulose). Independent parallel reactions model very well describes devolatilization process. It was found that increased amount of extractives can significantly affect on increased release of light gaseous products, but declining hydrocarbons, mostly the alkanes. Liquid product is mainly composed of phenolics, aldehydes, acids, esters and ketones. The carbonization process produces the great abundance of polycyclic aromatic hydrocarbons (PAH's), where naphthalene is the most abundant. Mechanism for PAH's formation was suggested. This study represents the first step in a much wider and more comprehensive way in thermal conversion processes of this type of fuel. © 2018 Elsevier Ltd
T2  - Fuel
T1  - Characterization analysis of Poplar fluff pyrolysis products. Multi-component kinetic study
VL  - 238
SP  - 111
EP  - 128
DO  - 10.1016/j.fuel.2018.10.064
ER  - 

@article{
author = "Janković, Bojan Ž. and Manić, Nebojša G. and Dodevski, Vladimir and Popović, Jasmina G. and Rusmirović, Jelena D. and Tošić, Miloš S.",
year = "2019",
abstract = "This paper describes the pyrolysis of Poplar fluff (from Populus alba) using on-line apparatus, and carbonization process at 850 °C using the fixed bed reactor. Characteristics of pyrolysis products were examined. Elemental and chemical analyses were shown that Poplar fluff has higher energy content characterized by increased content of fibrous structure (particularly cellulose). Independent parallel reactions model very well describes devolatilization process. It was found that increased amount of extractives can significantly affect on increased release of light gaseous products, but declining hydrocarbons, mostly the alkanes. Liquid product is mainly composed of phenolics, aldehydes, acids, esters and ketones. The carbonization process produces the great abundance of polycyclic aromatic hydrocarbons (PAH's), where naphthalene is the most abundant. Mechanism for PAH's formation was suggested. This study represents the first step in a much wider and more comprehensive way in thermal conversion processes of this type of fuel. © 2018 Elsevier Ltd",
journal = "Fuel",
title = "Characterization analysis of Poplar fluff pyrolysis products. Multi-component kinetic study",
volume = "238",
pages = "111-128",
doi = "10.1016/j.fuel.2018.10.064"
}

Janković, B. Ž., Manić, N. G., Dodevski, V., Popović, J. G., Rusmirović, J. D.,& Tošić, M. S.. (2019). Characterization analysis of Poplar fluff pyrolysis products. Multi-component kinetic study. in Fuel, 238, 111-128.
https://doi.org/10.1016/j.fuel.2018.10.064

Janković BŽ, Manić NG, Dodevski V, Popović JG, Rusmirović JD, Tošić MS. Characterization analysis of Poplar fluff pyrolysis products. Multi-component kinetic study. in Fuel. 2019;238:111-128.
doi:10.1016/j.fuel.2018.10.064 .

Janković, Bojan Ž., Manić, Nebojša G., Dodevski, Vladimir, Popović, Jasmina G., Rusmirović, Jelena D., Tošić, Miloš S., "Characterization analysis of Poplar fluff pyrolysis products. Multi-component kinetic study" in Fuel, 238 (2019):111-128,
https://doi.org/10.1016/j.fuel.2018.10.064 . .

TY  - JOUR
AU  - Rusmirović, Jelena D.
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8096
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-?-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g -1 for WL-?-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g -1 for Cd 2+ , Ni 2+ , phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-?-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-?-APS. © 2019, Springer-Verlag GmbH Germany, part of Springer Nature.
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
VL  - 26
IS  - 12
SP  - 12379
EP  - 12398
DO  - 10.1007/s11356-019-04625-0
ER  - 

@article{
author = "Rusmirović, Jelena D. and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-?-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g -1 for WL-?-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g -1 for Cd 2+ , Ni 2+ , phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-?-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-?-APS. © 2019, Springer-Verlag GmbH Germany, part of Springer Nature.",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
volume = "26",
number = "12",
pages = "12379-12398",
doi = "10.1007/s11356-019-04625-0"
}

Rusmirović, J. D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B.. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research, 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0

Rusmirović JD, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0 .

Rusmirović, Jelena D., Obradović, Nina, Perendija, Jovana, Umićević, Ana, Kapidžić, Ana, Vlahović, Branislav, Pavlović, Vera P., Marinković, Aleksandar D., Pavlović, Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" in Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 . .

TY  - JOUR
AU  - Rusmirović, Jelena D.
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8101
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
VL  - 26
IS  - 12
SP  - 12379
EP  - 12398
DO  - 10.1007/s11356-019-04625-0
ER  - 

@article{
author = "Rusmirović, Jelena D. and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
volume = "26",
number = "12",
pages = "12379-12398",
doi = "10.1007/s11356-019-04625-0"
}

Rusmirović, J. D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B.. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research, 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0

Rusmirović JD, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0 .

Rusmirović, Jelena D., Obradović, Nina, Perendija, Jovana, Umićević, Ana, Kapidžić, Ana, Vlahović, Branislav, Pavlović, Vera P., Marinković, Aleksandar D., Pavlović, Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" in Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 . .

TY  - JOUR
AU  - Radović, Marko
AU  - Adamović, Tijana
AU  - Pavlović, Jelena
AU  - Rusmirović, Jelena
AU  - Tadić, Vanja
AU  - Branković, Zorica
AU  - Ivanović, Jasna
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8438
AB  - Supercritical CO2 impregnation process was used for the first time to fabricate biodegradable gelatin-chitosan (G/Ch) films containing clove oil (CO) for potential use in active food packaging. All the impregnations were carried out at moderately low temperature (40 °C). Aiming to maximize CO loading in the films with acceptable morphological, structural and thermal properties, CO2 pressure, impregnation time and G:Ch mass ratio were varied. Gelatin fraction in the films of 25-50 wt.%, scCO2 pressures of 10-20 MPa and impregnation time of 2-6 h impregnation favoured the CO loading. Processing of the film with equal gelatin to chitosan mass ratio (G/Ch50:50) at 10 MPa for 2 h yielded sufficiently high loading (56 mg CO/gfilm) without an adverse effect on morphological properties. The G/Ch50:50 film was therefore chosen for structural and thermal analyses. ATR-FTIR analysis confirmed successful CO incorporation into the G/Ch50:50 and its interaction with the film. Plasticizing effect of scCO2 and CO on the film was evidenced by DSC. Incorporation of 56 mg CO/gfilm into the G/Ch50:50 didn't affect thermal stability of the film. Beside environmental benefits, supercritical impregnation process enables fast fabrication of G/Ch bio-composite films containing CO, thermally stable to 110 °C, which is suitable for most of food packaging applications. © 2019, CI and CEQ. All rights reserved.
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - Supercritical CO2 impregnation of Gelatin-Chitosan films with clove essential oil and characterization thereof
VL  - 25
IS  - 2
SP  - 119
EP  - 130
DO  - 10.2298/CICEQ180323025R
ER  - 

@article{
author = "Radović, Marko and Adamović, Tijana and Pavlović, Jelena and Rusmirović, Jelena and Tadić, Vanja and Branković, Zorica and Ivanović, Jasna",
year = "2019",
abstract = "Supercritical CO2 impregnation process was used for the first time to fabricate biodegradable gelatin-chitosan (G/Ch) films containing clove oil (CO) for potential use in active food packaging. All the impregnations were carried out at moderately low temperature (40 °C). Aiming to maximize CO loading in the films with acceptable morphological, structural and thermal properties, CO2 pressure, impregnation time and G:Ch mass ratio were varied. Gelatin fraction in the films of 25-50 wt.%, scCO2 pressures of 10-20 MPa and impregnation time of 2-6 h impregnation favoured the CO loading. Processing of the film with equal gelatin to chitosan mass ratio (G/Ch50:50) at 10 MPa for 2 h yielded sufficiently high loading (56 mg CO/gfilm) without an adverse effect on morphological properties. The G/Ch50:50 film was therefore chosen for structural and thermal analyses. ATR-FTIR analysis confirmed successful CO incorporation into the G/Ch50:50 and its interaction with the film. Plasticizing effect of scCO2 and CO on the film was evidenced by DSC. Incorporation of 56 mg CO/gfilm into the G/Ch50:50 didn't affect thermal stability of the film. Beside environmental benefits, supercritical impregnation process enables fast fabrication of G/Ch bio-composite films containing CO, thermally stable to 110 °C, which is suitable for most of food packaging applications. © 2019, CI and CEQ. All rights reserved.",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "Supercritical CO2 impregnation of Gelatin-Chitosan films with clove essential oil and characterization thereof",
volume = "25",
number = "2",
pages = "119-130",
doi = "10.2298/CICEQ180323025R"
}

Radović, M., Adamović, T., Pavlović, J., Rusmirović, J., Tadić, V., Branković, Z.,& Ivanović, J.. (2019). Supercritical CO2 impregnation of Gelatin-Chitosan films with clove essential oil and characterization thereof. in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 25(2), 119-130.
https://doi.org/10.2298/CICEQ180323025R

Radović M, Adamović T, Pavlović J, Rusmirović J, Tadić V, Branković Z, Ivanović J. Supercritical CO2 impregnation of Gelatin-Chitosan films with clove essential oil and characterization thereof. in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2019;25(2):119-130.
doi:10.2298/CICEQ180323025R .

Radović, Marko, Adamović, Tijana, Pavlović, Jelena, Rusmirović, Jelena, Tadić, Vanja, Branković, Zorica, Ivanović, Jasna, "Supercritical CO2 impregnation of Gelatin-Chitosan films with clove essential oil and characterization thereof" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 25, no. 2 (2019):119-130,
https://doi.org/10.2298/CICEQ180323025R . .

TY  - JOUR
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Rusmirović, Jelena D.
AU  - Marinković, Aleksandar D.
AU  - Antić, Vesna
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1558
AB  - In this study, porous macro- and micro-cellular wollastonite-based ceramics was synthesized. A ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as a starting material. After 20 min of ultrasound treatment, and calcination at 250 degrees C for 30 min, different pore-forming agents were added to the as-obtained powders. Differential thermal analysis was used to determine characteristic temperatures of processes occurring within powders during heating. Based on the obtained results, the sintering regime was set up. The prepared mixtures were pressed into pallets and sintered at 900 degrees C. During the sintering regime, porous wollastonite-based ceramics was obtained. The phase composition of the sintered samples, as well as the microstructures, were analyzed by using X-ray diffraction and SEM. A two-phase system was detected in all samples, CaSiO3 wollastonite and Ca2SiO4 larnite, and their ratio varied with each pore-forming agent. It was observed that the addition of different pore-forming agents resulted in significantly different microstructures. In a batch test, the influence of pH, the contact time and the initial ion concentration on the adsorption efficiency of As+5, Cr(+6)and phosphate ions on the synthesized adsorbents were studied. Time-dependent adsorption is best described by the pseudo-second-order kinetic model and the Weber-Morris model, which predict intra-particle diffusion as a rate-controlling step of the overall process. High adsorption capacities, 21.93, 23.88, and 27.29 mg g(-1), were obtained for the CaCO3-siloxane-nanocellulose sorbent, and similar/lower capacities were obtained for the CaCO3-siloxane-PMMA and CaCO3-siloxane-cotton wool adsorbents.
T2  - Ceramics International
T1  - Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities
VL  - 43
IS  - 10
SP  - 7461
EP  - 7468
DO  - 10.1016/j.ceramint.2017.03.021
ER  - 

@article{
author = "Obradović, Nina and Filipović, Suzana and Marković, Smilja and Mitrić, Miodrag and Rusmirović, Jelena D. and Marinković, Aleksandar D. and Antić, Vesna and Pavlović, Vladimir B.",
year = "2017",
abstract = "In this study, porous macro- and micro-cellular wollastonite-based ceramics was synthesized. A ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as a starting material. After 20 min of ultrasound treatment, and calcination at 250 degrees C for 30 min, different pore-forming agents were added to the as-obtained powders. Differential thermal analysis was used to determine characteristic temperatures of processes occurring within powders during heating. Based on the obtained results, the sintering regime was set up. The prepared mixtures were pressed into pallets and sintered at 900 degrees C. During the sintering regime, porous wollastonite-based ceramics was obtained. The phase composition of the sintered samples, as well as the microstructures, were analyzed by using X-ray diffraction and SEM. A two-phase system was detected in all samples, CaSiO3 wollastonite and Ca2SiO4 larnite, and their ratio varied with each pore-forming agent. It was observed that the addition of different pore-forming agents resulted in significantly different microstructures. In a batch test, the influence of pH, the contact time and the initial ion concentration on the adsorption efficiency of As+5, Cr(+6)and phosphate ions on the synthesized adsorbents were studied. Time-dependent adsorption is best described by the pseudo-second-order kinetic model and the Weber-Morris model, which predict intra-particle diffusion as a rate-controlling step of the overall process. High adsorption capacities, 21.93, 23.88, and 27.29 mg g(-1), were obtained for the CaCO3-siloxane-nanocellulose sorbent, and similar/lower capacities were obtained for the CaCO3-siloxane-PMMA and CaCO3-siloxane-cotton wool adsorbents.",
journal = "Ceramics International",
title = "Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities",
volume = "43",
number = "10",
pages = "7461-7468",
doi = "10.1016/j.ceramint.2017.03.021"
}

Obradović, N., Filipović, S., Marković, S., Mitrić, M., Rusmirović, J. D., Marinković, A. D., Antić, V.,& Pavlović, V. B.. (2017). Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities. in Ceramics International, 43(10), 7461-7468.
https://doi.org/10.1016/j.ceramint.2017.03.021

Obradović N, Filipović S, Marković S, Mitrić M, Rusmirović JD, Marinković AD, Antić V, Pavlović VB. Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities. in Ceramics International. 2017;43(10):7461-7468.
doi:10.1016/j.ceramint.2017.03.021 .

Obradović, Nina, Filipović, Suzana, Marković, Smilja, Mitrić, Miodrag, Rusmirović, Jelena D., Marinković, Aleksandar D., Antić, Vesna, Pavlović, Vladimir B., "Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities" in Ceramics International, 43, no. 10 (2017):7461-7468,
https://doi.org/10.1016/j.ceramint.2017.03.021 . .

TY  - JOUR
AU  - Rusmirović, Jelena D.
AU  - Radoman, Tijana S.
AU  - Džunuzović, Enis S.
AU  - Džunuzović, Jasna V.
AU  - Markovski, Jasmina S.
AU  - Spasojević, Pavle M.
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1473
AB  - Unsaturated polyester resin (UPe)-based nanocomposites and fumed silica Aerosil R812S, R805 and R816, and R200 modified with phenyl terminal group, R200NPh, were prepared. UPe resins were synthesized from maleic anhydride and products of glycolysis, obtained by polyethylene terephthalate depolymerization with dipropylene glycol in the presence of tetrabutyl titanate catalyst. The obtained unsaturated polyesters were characterized by acid, hydroxyl, and iodine values and by FTIR and NMR analysis. The microstructural analysis of the prepared nanocomposites, performed by using transmission electron microscopy, confirmed that silica nanoparticles formed chain-like aggregates in the polymer matrix. The presence of modified silica nanoparticles had no influence on the glass transition temperature and thermal stability of polyester matrix. The tensile modulus, stress at break, and hardness of cured products increased with increasing silica content. The impact strength of cured samples was not influenced by the silica content. (C) 2015 Society of Plastics Engineers
T2  - Polymer Composites
T1  - Effect of the Modified Silica Nanofiller on the Mechanical Properties of Unsaturated Polyester Resins Based on Recycled Polyethylene Terephthalate
VL  - 38
IS  - 3
SP  - 538
EP  - 554
DO  - 10.1002/pc.23613
ER  - 

@article{
author = "Rusmirović, Jelena D. and Radoman, Tijana S. and Džunuzović, Enis S. and Džunuzović, Jasna V. and Markovski, Jasmina S. and Spasojević, Pavle M. and Marinković, Aleksandar D.",
year = "2017",
abstract = "Unsaturated polyester resin (UPe)-based nanocomposites and fumed silica Aerosil R812S, R805 and R816, and R200 modified with phenyl terminal group, R200NPh, were prepared. UPe resins were synthesized from maleic anhydride and products of glycolysis, obtained by polyethylene terephthalate depolymerization with dipropylene glycol in the presence of tetrabutyl titanate catalyst. The obtained unsaturated polyesters were characterized by acid, hydroxyl, and iodine values and by FTIR and NMR analysis. The microstructural analysis of the prepared nanocomposites, performed by using transmission electron microscopy, confirmed that silica nanoparticles formed chain-like aggregates in the polymer matrix. The presence of modified silica nanoparticles had no influence on the glass transition temperature and thermal stability of polyester matrix. The tensile modulus, stress at break, and hardness of cured products increased with increasing silica content. The impact strength of cured samples was not influenced by the silica content. (C) 2015 Society of Plastics Engineers",
journal = "Polymer Composites",
title = "Effect of the Modified Silica Nanofiller on the Mechanical Properties of Unsaturated Polyester Resins Based on Recycled Polyethylene Terephthalate",
volume = "38",
number = "3",
pages = "538-554",
doi = "10.1002/pc.23613"
}

Rusmirović, J. D., Radoman, T. S., Džunuzović, E. S., Džunuzović, J. V., Markovski, J. S., Spasojević, P. M.,& Marinković, A. D.. (2017). Effect of the Modified Silica Nanofiller on the Mechanical Properties of Unsaturated Polyester Resins Based on Recycled Polyethylene Terephthalate. in Polymer Composites, 38(3), 538-554.
https://doi.org/10.1002/pc.23613

Rusmirović JD, Radoman TS, Džunuzović ES, Džunuzović JV, Markovski JS, Spasojević PM, Marinković AD. Effect of the Modified Silica Nanofiller on the Mechanical Properties of Unsaturated Polyester Resins Based on Recycled Polyethylene Terephthalate. in Polymer Composites. 2017;38(3):538-554.
doi:10.1002/pc.23613 .

Rusmirović, Jelena D., Radoman, Tijana S., Džunuzović, Enis S., Džunuzović, Jasna V., Markovski, Jasmina S., Spasojević, Pavle M., Marinković, Aleksandar D., "Effect of the Modified Silica Nanofiller on the Mechanical Properties of Unsaturated Polyester Resins Based on Recycled Polyethylene Terephthalate" in Polymer Composites, 38, no. 3 (2017):538-554,
https://doi.org/10.1002/pc.23613 . .

TY  - JOUR
AU  - Kovačević, Tihomir
AU  - Rusmirović, Jelena D.
AU  - Tomić, Nataša
AU  - Marinović-Cincović, Milena
AU  - Kamberović, Željko
AU  - Tomić, Miloš
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1708
AB  - Influence of the addition of three different non-metallic fractions (NMF), obtained by processing of printed circuit boards (PCBs), on the mechanical and thermal properties of unsaturated polyester resin (UPR) based composites were studied in this paper. UPR, based on products of PET depolymerization, and NMF were characterized using FTIR, NMR, optical microscopy and SEM/EDS analysis. Cross-linking density (v), storage modulus (G), damping factor (tan delta) and glass transition temperature (T-g) of the composites were determined from the DMA testing. Tensile (sigma(t)) and flexural (sigma(f)) strength, and micro Vickers hardness indicated good composite performance under static load. Thermal and flame resistant properties were analyzed by TGA/DTG and UL-94 flammability test whereby V-2 category of appropriate composite was achieved. Composites with satisfactory mechanical and thermal properties reflected synergetic effect of constituents obtained from waste materials. (C) 2017 Elsevier Ltd. All rights reserved.
T2  - Composites: Part B: Engineering
T1  - New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties
VL  - 127
SP  - 1
EP  - 14
DO  - 10.1016/j.compositesb.2017.06.020
ER  - 

@article{
author = "Kovačević, Tihomir and Rusmirović, Jelena D. and Tomić, Nataša and Marinović-Cincović, Milena and Kamberović, Željko and Tomić, Miloš and Marinković, Aleksandar D.",
year = "2017",
abstract = "Influence of the addition of three different non-metallic fractions (NMF), obtained by processing of printed circuit boards (PCBs), on the mechanical and thermal properties of unsaturated polyester resin (UPR) based composites were studied in this paper. UPR, based on products of PET depolymerization, and NMF were characterized using FTIR, NMR, optical microscopy and SEM/EDS analysis. Cross-linking density (v), storage modulus (G), damping factor (tan delta) and glass transition temperature (T-g) of the composites were determined from the DMA testing. Tensile (sigma(t)) and flexural (sigma(f)) strength, and micro Vickers hardness indicated good composite performance under static load. Thermal and flame resistant properties were analyzed by TGA/DTG and UL-94 flammability test whereby V-2 category of appropriate composite was achieved. Composites with satisfactory mechanical and thermal properties reflected synergetic effect of constituents obtained from waste materials. (C) 2017 Elsevier Ltd. All rights reserved.",
journal = "Composites: Part B: Engineering",
title = "New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties",
volume = "127",
pages = "1-14",
doi = "10.1016/j.compositesb.2017.06.020"
}

Kovačević, T., Rusmirović, J. D., Tomić, N., Marinović-Cincović, M., Kamberović, Ž., Tomić, M.,& Marinković, A. D.. (2017). New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties. in Composites: Part B: Engineering, 127, 1-14.
https://doi.org/10.1016/j.compositesb.2017.06.020

Kovačević T, Rusmirović JD, Tomić N, Marinović-Cincović M, Kamberović Ž, Tomić M, Marinković AD. New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties. in Composites: Part B: Engineering. 2017;127:1-14.
doi:10.1016/j.compositesb.2017.06.020 .

Kovačević, Tihomir, Rusmirović, Jelena D., Tomić, Nataša, Marinović-Cincović, Milena, Kamberović, Željko, Tomić, Miloš, Marinković, Aleksandar D., "New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties" in Composites: Part B: Engineering, 127 (2017):1-14,
https://doi.org/10.1016/j.compositesb.2017.06.020 . .

TY  - JOUR
AU  - Taleb, Khaled
AU  - Markovski, Jasmina S.
AU  - Milosavljevic, Milutin
AU  - Marinović-Cincović, Milena
AU  - Rusmirović, Jelena D.
AU  - Ristić, Mirjana
AU  - Marinković, Aleksandar D.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/704
AB  - Optimization of the synthesis of cross-linked macroporous polymer impregnated with hydrous iron oxide and post-process of obtained material by application of freeze/drying technique, produces high performance adsorbent applicable for efficient arsenic removal. Characterization and analysis of adsorbent performances encompass material characterization, equilibrium and kinetic study, influences of interfering ions and modeling of adsorption data in ion free and competitive conditions. Kinetic study, i.e. fitting by Weber-Morris model and single resistance mass transfer model predicts intra-particle diffusion as a rate-controlling step. Thermodynamic parameters indicate endothermic, feasible and spontaneous nature of adsorption process. Competitive kinetic study in the presence of interfering ions shows low detrimental effect on both capacity and kinetic of arsenic removal. Visual MINTEQ modeling software was used for the prediction of adsorbent performances and interfering ion influences. Preliminary fixed-bed column study was accomplished by the use of Bohart-Adams, Yoon-Nelson, Thomas and Modified dose-response model. High arsenic removal capacity of 31.0 mg g(-1), at 25 degrees C, and multi-cycle reusability of ER/DETA/FO/FD, significantly affects the affordability of techno-economic indicators based on the operating costs of the process. (C) 2015 Elsevier B.V. All rights reserved.
T2  - Chemical Engineering Journal
T1  - Efficient arsenic removal by cross-linked macroporous polymer impregnated with hydrous iron oxide: Material performance
VL  - 279
SP  - 66
EP  - 78
DO  - 10.1016/j.cej.2015.04.147
ER  - 

@article{
author = "Taleb, Khaled and Markovski, Jasmina S. and Milosavljevic, Milutin and Marinović-Cincović, Milena and Rusmirović, Jelena D. and Ristić, Mirjana and Marinković, Aleksandar D.",
year = "2015",
abstract = "Optimization of the synthesis of cross-linked macroporous polymer impregnated with hydrous iron oxide and post-process of obtained material by application of freeze/drying technique, produces high performance adsorbent applicable for efficient arsenic removal. Characterization and analysis of adsorbent performances encompass material characterization, equilibrium and kinetic study, influences of interfering ions and modeling of adsorption data in ion free and competitive conditions. Kinetic study, i.e. fitting by Weber-Morris model and single resistance mass transfer model predicts intra-particle diffusion as a rate-controlling step. Thermodynamic parameters indicate endothermic, feasible and spontaneous nature of adsorption process. Competitive kinetic study in the presence of interfering ions shows low detrimental effect on both capacity and kinetic of arsenic removal. Visual MINTEQ modeling software was used for the prediction of adsorbent performances and interfering ion influences. Preliminary fixed-bed column study was accomplished by the use of Bohart-Adams, Yoon-Nelson, Thomas and Modified dose-response model. High arsenic removal capacity of 31.0 mg g(-1), at 25 degrees C, and multi-cycle reusability of ER/DETA/FO/FD, significantly affects the affordability of techno-economic indicators based on the operating costs of the process. (C) 2015 Elsevier B.V. All rights reserved.",
journal = "Chemical Engineering Journal",
title = "Efficient arsenic removal by cross-linked macroporous polymer impregnated with hydrous iron oxide: Material performance",
volume = "279",
pages = "66-78",
doi = "10.1016/j.cej.2015.04.147"
}

Taleb, K., Markovski, J. S., Milosavljevic, M., Marinović-Cincović, M., Rusmirović, J. D., Ristić, M.,& Marinković, A. D.. (2015). Efficient arsenic removal by cross-linked macroporous polymer impregnated with hydrous iron oxide: Material performance. in Chemical Engineering Journal, 279, 66-78.
https://doi.org/10.1016/j.cej.2015.04.147

Taleb K, Markovski JS, Milosavljevic M, Marinović-Cincović M, Rusmirović JD, Ristić M, Marinković AD. Efficient arsenic removal by cross-linked macroporous polymer impregnated with hydrous iron oxide: Material performance. in Chemical Engineering Journal. 2015;279:66-78.
doi:10.1016/j.cej.2015.04.147 .

Taleb, Khaled, Markovski, Jasmina S., Milosavljevic, Milutin, Marinović-Cincović, Milena, Rusmirović, Jelena D., Ristić, Mirjana, Marinković, Aleksandar D., "Efficient arsenic removal by cross-linked macroporous polymer impregnated with hydrous iron oxide: Material performance" in Chemical Engineering Journal, 279 (2015):66-78,
https://doi.org/10.1016/j.cej.2015.04.147 . .