Radović, Marko B.

Link to this page

Authority KeyName Variants
8d163f9b-d688-4647-a90d-48ce3778ca2b
  • Radović, Marko B. (3)
Projects

Author's Bibliography

Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry

Radović, Marko B.; Stojadinović, Bojan; Tomić, Nataša; Golubović, Aleksandar V.; Matović, Branko; Veljkovic, Ivana; Dohčević-Mitrović, Zorana

(2014)

TY  - JOUR
AU  - Radović, Marko B.
AU  - Stojadinović, Bojan
AU  - Tomić, Nataša
AU  - Golubović, Aleksandar V.
AU  - Matović, Branko
AU  - Veljkovic, Ivana
AU  - Dohčević-Mitrović, Zorana 
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/308
AB  - Synthesis process strongly influences the nanocrystalline CeO2-y defective structure. The presence of surface defects, in the form of oxygen vacancies in different charge states (F centers), can change the electronic properties of ceria nanocrystals. Nanocrystalline CeO2-y samples were synthesized using three different methods (precipitation, self-propagating room temperature, and hydrothermal synthesis). Raman spectroscopy was used to identify the presence of oxygen vacancies which presumably were formed at the nanoparticle surface. The defect concentration depended on the crystallite size of differently prepared CeO2-y samples. Scanning tunneling microscopy/spectroscopy and ellipsometry were employed to investigate the electronic band structure of defective CeO2-y nanocrystals. Scanning tunneling spectroscopy measurements demonstrated that inside the band gap of CeO2-y nanocrystals, besides the filled 4 f states, appeared additional states which were related to occupied and empty F center defect states. From the ellipsometric measurements, using the critical points model, the energy positions of different F centers states and the values of the reduced band gap energies were determined. The analysis of obtained data pointed out that depending on the synthesis method, different types of F centers (F+ and F-0) can be formed in the CeO2-y nanocrystals. The formation of different F center defect states inside the ceria gap have a strong impact on the electrical, optical, and magnetic properties of ceria nanocrystals. (C) 2014 AIP Publishing LLC.
T2  - Journal of Applied Physics
T1  - Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry
VL  - 116
IS  - 23
DO  - 10.1063/1.4904516
ER  - 
@article{
author = "Radović, Marko B. and Stojadinović, Bojan and Tomić, Nataša and Golubović, Aleksandar V. and Matović, Branko and Veljkovic, Ivana and Dohčević-Mitrović, Zorana ",
year = "2014",
abstract = "Synthesis process strongly influences the nanocrystalline CeO2-y defective structure. The presence of surface defects, in the form of oxygen vacancies in different charge states (F centers), can change the electronic properties of ceria nanocrystals. Nanocrystalline CeO2-y samples were synthesized using three different methods (precipitation, self-propagating room temperature, and hydrothermal synthesis). Raman spectroscopy was used to identify the presence of oxygen vacancies which presumably were formed at the nanoparticle surface. The defect concentration depended on the crystallite size of differently prepared CeO2-y samples. Scanning tunneling microscopy/spectroscopy and ellipsometry were employed to investigate the electronic band structure of defective CeO2-y nanocrystals. Scanning tunneling spectroscopy measurements demonstrated that inside the band gap of CeO2-y nanocrystals, besides the filled 4 f states, appeared additional states which were related to occupied and empty F center defect states. From the ellipsometric measurements, using the critical points model, the energy positions of different F centers states and the values of the reduced band gap energies were determined. The analysis of obtained data pointed out that depending on the synthesis method, different types of F centers (F+ and F-0) can be formed in the CeO2-y nanocrystals. The formation of different F center defect states inside the ceria gap have a strong impact on the electrical, optical, and magnetic properties of ceria nanocrystals. (C) 2014 AIP Publishing LLC.",
journal = "Journal of Applied Physics",
title = "Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry",
volume = "116",
number = "23",
doi = "10.1063/1.4904516"
}
Radović, M. B., Stojadinović, B., Tomić, N., Golubović, A. V., Matović, B., Veljkovic, I.,& Dohčević-Mitrović, Z.. (2014). Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry. in Journal of Applied Physics, 116(23).
https://doi.org/10.1063/1.4904516
Radović MB, Stojadinović B, Tomić N, Golubović AV, Matović B, Veljkovic I, Dohčević-Mitrović Z. Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry. in Journal of Applied Physics. 2014;116(23).
doi:10.1063/1.4904516 .
Radović, Marko B., Stojadinović, Bojan, Tomić, Nataša, Golubović, Aleksandar V., Matović, Branko, Veljkovic, Ivana, Dohčević-Mitrović, Zorana , "Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry" in Journal of Applied Physics, 116, no. 23 (2014),
https://doi.org/10.1063/1.4904516 . .
13
7
12

Synthesis, calcination and characterization of Nanosized ceria powders by self-propagating room temperature method

Matović, Branko; Dukić, Jelena; Babić, Biljana M.; Bučevac, Dušan; Dohčević-Mitrović, Zorana ; Radović, Marko B.; Bošković, Snežana B.

(2013)

TY  - JOUR
AU  - Matović, Branko
AU  - Dukić, Jelena
AU  - Babić, Biljana M.
AU  - Bučevac, Dušan
AU  - Dohčević-Mitrović, Zorana 
AU  - Radović, Marko B.
AU  - Bošković, Snežana B.
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5497
AB  - Nanometric ceria powders with fluorite-type structure were obtained by applying self-propagating room temperature method. The obtained powders were subsequently thermally treated (calcined) at different temperatures for different times. Powder properties such as specific surface area, crystallite size, particle size and lattice parameter have been studied. Roentgen diffraction analysis (XRD), BET and Raman scattering measurements were used to characterize the as-obtained (uncalcined) powder as well as powders calcined at different temperatures. It was found that the average diameter of the as-obtained crystallites is in the range of 3-5 nm whereas the specific surface area is about 70 m(2)/g. The subsequent, 15 min long, calcination of as-obtained powder at different temperatures gradually increased crystallite size up to similar to 60 nm and reduced specific surface down to 6 m(2)/g. Raman spectra of synthesized CeO2-y depicts a strong red shift of active triply degenerate F-2 (g) mode as well as additional peak at 600 cm(-1). The frequency of F-2 g mode increased while its line width decreased with an increase in calcination temperature. Such a behavior is considered to be the result of particle size increase and agglomeration during the calcination. After the heat treatment at 800 degrees C crystallite size reached value larger than 50 nm. Second order Raman mode, which originates from intrinsic oxygen vacancies, disappeared after calcination. (c) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Synthesis, calcination and characterization of Nanosized ceria powders by self-propagating room temperature method
VL  - 39
IS  - 5
SP  - 5007
EP  - 5012
DO  - 10.1016/j.ceramint.2012.11.098
ER  - 
@article{
author = "Matović, Branko and Dukić, Jelena and Babić, Biljana M. and Bučevac, Dušan and Dohčević-Mitrović, Zorana  and Radović, Marko B. and Bošković, Snežana B.",
year = "2013",
abstract = "Nanometric ceria powders with fluorite-type structure were obtained by applying self-propagating room temperature method. The obtained powders were subsequently thermally treated (calcined) at different temperatures for different times. Powder properties such as specific surface area, crystallite size, particle size and lattice parameter have been studied. Roentgen diffraction analysis (XRD), BET and Raman scattering measurements were used to characterize the as-obtained (uncalcined) powder as well as powders calcined at different temperatures. It was found that the average diameter of the as-obtained crystallites is in the range of 3-5 nm whereas the specific surface area is about 70 m(2)/g. The subsequent, 15 min long, calcination of as-obtained powder at different temperatures gradually increased crystallite size up to similar to 60 nm and reduced specific surface down to 6 m(2)/g. Raman spectra of synthesized CeO2-y depicts a strong red shift of active triply degenerate F-2 (g) mode as well as additional peak at 600 cm(-1). The frequency of F-2 g mode increased while its line width decreased with an increase in calcination temperature. Such a behavior is considered to be the result of particle size increase and agglomeration during the calcination. After the heat treatment at 800 degrees C crystallite size reached value larger than 50 nm. Second order Raman mode, which originates from intrinsic oxygen vacancies, disappeared after calcination. (c) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Synthesis, calcination and characterization of Nanosized ceria powders by self-propagating room temperature method",
volume = "39",
number = "5",
pages = "5007-5012",
doi = "10.1016/j.ceramint.2012.11.098"
}
Matović, B., Dukić, J., Babić, B. M., Bučevac, D., Dohčević-Mitrović, Z., Radović, M. B.,& Bošković, S. B.. (2013). Synthesis, calcination and characterization of Nanosized ceria powders by self-propagating room temperature method. in Ceramics International, 39(5), 5007-5012.
https://doi.org/10.1016/j.ceramint.2012.11.098
Matović B, Dukić J, Babić BM, Bučevac D, Dohčević-Mitrović Z, Radović MB, Bošković SB. Synthesis, calcination and characterization of Nanosized ceria powders by self-propagating room temperature method. in Ceramics International. 2013;39(5):5007-5012.
doi:10.1016/j.ceramint.2012.11.098 .
Matović, Branko, Dukić, Jelena, Babić, Biljana M., Bučevac, Dušan, Dohčević-Mitrović, Zorana , Radović, Marko B., Bošković, Snežana B., "Synthesis, calcination and characterization of Nanosized ceria powders by self-propagating room temperature method" in Ceramics International, 39, no. 5 (2013):5007-5012,
https://doi.org/10.1016/j.ceramint.2012.11.098 . .
6
10
9
11

Room-temperature synthesis of nanometric alpha-Bi2O3

Prekajski, Marija D.; Kremenović, Aleksandar S.; Babić, Biljana M.; Rosić, Milena; Matović, Branko; Radosavljević-Mihajlović, Ana S.; Radović, Marko B.

(2010)

TY  - JOUR
AU  - Prekajski, Marija D.
AU  - Kremenović, Aleksandar S.
AU  - Babić, Biljana M.
AU  - Rosić, Milena
AU  - Matović, Branko
AU  - Radosavljević-Mihajlović, Ana S.
AU  - Radović, Marko B.
PY  - 2010
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4103
AB  - Nanometric Bi2O3 powder was successfully synthesized by applying the method based on self-propagating room temperature reaction (SPRT) between bismuth nitrates and sodium hydroxide. X-ray powder diffraction (XRPD) and Rietvelds structure refinement method were applied to characterize prepared powder. It revealed that synthesized material is a single phase monoclinic alpha-Bi2O3 (space group P2(1)/c with cell parameters a = 5.84605(4)angstrom, b = 8.16339(6) angstrom, c = 7.50788(6) angstrom and beta = 112.9883(8)). Powder particles were of nanometric size (about 50 nm). Raman spectral studies conformed that the obtained powder is single phase alpha-Bi2O3. Specific surface area of obtained powder was measured by Brunauer-Emmet-Teller (BET) method. (C) 2010 Elsevier B.V. All rights reserved.
T2  - Materials Letters
T1  - Room-temperature synthesis of nanometric alpha-Bi2O3
VL  - 64
IS  - 20
SP  - 2247
EP  - 2250
DO  - 10.1016/j.matlet.2010.06.052
ER  - 
@article{
author = "Prekajski, Marija D. and Kremenović, Aleksandar S. and Babić, Biljana M. and Rosić, Milena and Matović, Branko and Radosavljević-Mihajlović, Ana S. and Radović, Marko B.",
year = "2010",
abstract = "Nanometric Bi2O3 powder was successfully synthesized by applying the method based on self-propagating room temperature reaction (SPRT) between bismuth nitrates and sodium hydroxide. X-ray powder diffraction (XRPD) and Rietvelds structure refinement method were applied to characterize prepared powder. It revealed that synthesized material is a single phase monoclinic alpha-Bi2O3 (space group P2(1)/c with cell parameters a = 5.84605(4)angstrom, b = 8.16339(6) angstrom, c = 7.50788(6) angstrom and beta = 112.9883(8)). Powder particles were of nanometric size (about 50 nm). Raman spectral studies conformed that the obtained powder is single phase alpha-Bi2O3. Specific surface area of obtained powder was measured by Brunauer-Emmet-Teller (BET) method. (C) 2010 Elsevier B.V. All rights reserved.",
journal = "Materials Letters",
title = "Room-temperature synthesis of nanometric alpha-Bi2O3",
volume = "64",
number = "20",
pages = "2247-2250",
doi = "10.1016/j.matlet.2010.06.052"
}
Prekajski, M. D., Kremenović, A. S., Babić, B. M., Rosić, M., Matović, B., Radosavljević-Mihajlović, A. S.,& Radović, M. B.. (2010). Room-temperature synthesis of nanometric alpha-Bi2O3. in Materials Letters, 64(20), 2247-2250.
https://doi.org/10.1016/j.matlet.2010.06.052
Prekajski MD, Kremenović AS, Babić BM, Rosić M, Matović B, Radosavljević-Mihajlović AS, Radović MB. Room-temperature synthesis of nanometric alpha-Bi2O3. in Materials Letters. 2010;64(20):2247-2250.
doi:10.1016/j.matlet.2010.06.052 .
Prekajski, Marija D., Kremenović, Aleksandar S., Babić, Biljana M., Rosić, Milena, Matović, Branko, Radosavljević-Mihajlović, Ana S., Radović, Marko B., "Room-temperature synthesis of nanometric alpha-Bi2O3" in Materials Letters, 64, no. 20 (2010):2247-2250,
https://doi.org/10.1016/j.matlet.2010.06.052 . .
34
27
35