TY  - JOUR
AU  - Erceg, Tamara
AU  - Vukić, Nevena
AU  - Šovljanski, Olja
AU  - Teofilović, Vesna
AU  - Porobić, Slavica
AU  - Baloš, Sebastian
AU  - Kojić, Sanja
AU  - Terek, Pal
AU  - Banjanin, Bojan
AU  - Rakić, Srđan
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11028
AB  - An active packaging based on the composite film was developed by incorporation of oregano oil as an antimicrobial agent into a cellulose acetate/polycaprolactone diol blend (CA/PCL-diol). A novel plasticizer based on polyethylene terephthalate (PET) glycolysis product (bis(hydroxyethyl terephthalate)) and tartaric acid was synthesized and its influence on the structural, surface, mechanical, barrier, and thermal properties were investigated. The obtained results have shown that plasticizer also has a compatibilizing effect, improving the miscibility of polymers in a blend. A sample with the optimal amount of plasticizer (30 wt%), as well as the best mechanical and barrier properties, was used for the preparation of series with different amounts of oregano oil (3, 6, and 9 wt%). The synthesized azo dye—5-(4-bromo-phenyl azo)-3-amido-6-hydroxy-4-methyl-2-pyridone, soluble in acetone, as well as a blend and plasticizer, has been shown as an adequate one for this composition, due to its ability to achieve a good pigmentation in a low amount (0.3 wt% per polymer blend weight), to absorb UV light, and decrease the aging of the material. Contemporary lifestyle has imposed a need for ready-to-eat (RTE) meals which saves consumers time. RTE food packaging should meet certain requirements such as the ability to prolong shelf-life and preserve the freshness of the food product, and at the same time to make a minimal amount of waste after usage, considering the fact that it is mostly single-use plastic food packaging. Optimal mechanical properties, biodegradability, and additional functions make these films suitable for the packaging of ready-to-eat (RTE) food such as fresh salad.
T2  - Cellulose
T1  - Preparation and characterization of biodegradable cellulose acetate-based films with novel plasticizer obtained by polyethylene terephthalate glycolysis intended for active packaging
VL  - InPress
DO  - 10.1007/s10570-023-05240-6
ER  - 

@article{
author = "Erceg, Tamara and Vukić, Nevena and Šovljanski, Olja and Teofilović, Vesna and Porobić, Slavica and Baloš, Sebastian and Kojić, Sanja and Terek, Pal and Banjanin, Bojan and Rakić, Srđan",
year = "2023",
abstract = "An active packaging based on the composite film was developed by incorporation of oregano oil as an antimicrobial agent into a cellulose acetate/polycaprolactone diol blend (CA/PCL-diol). A novel plasticizer based on polyethylene terephthalate (PET) glycolysis product (bis(hydroxyethyl terephthalate)) and tartaric acid was synthesized and its influence on the structural, surface, mechanical, barrier, and thermal properties were investigated. The obtained results have shown that plasticizer also has a compatibilizing effect, improving the miscibility of polymers in a blend. A sample with the optimal amount of plasticizer (30 wt%), as well as the best mechanical and barrier properties, was used for the preparation of series with different amounts of oregano oil (3, 6, and 9 wt%). The synthesized azo dye—5-(4-bromo-phenyl azo)-3-amido-6-hydroxy-4-methyl-2-pyridone, soluble in acetone, as well as a blend and plasticizer, has been shown as an adequate one for this composition, due to its ability to achieve a good pigmentation in a low amount (0.3 wt% per polymer blend weight), to absorb UV light, and decrease the aging of the material. Contemporary lifestyle has imposed a need for ready-to-eat (RTE) meals which saves consumers time. RTE food packaging should meet certain requirements such as the ability to prolong shelf-life and preserve the freshness of the food product, and at the same time to make a minimal amount of waste after usage, considering the fact that it is mostly single-use plastic food packaging. Optimal mechanical properties, biodegradability, and additional functions make these films suitable for the packaging of ready-to-eat (RTE) food such as fresh salad.",
journal = "Cellulose",
title = "Preparation and characterization of biodegradable cellulose acetate-based films with novel plasticizer obtained by polyethylene terephthalate glycolysis intended for active packaging",
volume = "InPress",
doi = "10.1007/s10570-023-05240-6"
}

Erceg, T., Vukić, N., Šovljanski, O., Teofilović, V., Porobić, S., Baloš, S., Kojić, S., Terek, P., Banjanin, B.,& Rakić, S.. (2023). Preparation and characterization of biodegradable cellulose acetate-based films with novel plasticizer obtained by polyethylene terephthalate glycolysis intended for active packaging. in Cellulose, InPress.
https://doi.org/10.1007/s10570-023-05240-6

Erceg T, Vukić N, Šovljanski O, Teofilović V, Porobić S, Baloš S, Kojić S, Terek P, Banjanin B, Rakić S. Preparation and characterization of biodegradable cellulose acetate-based films with novel plasticizer obtained by polyethylene terephthalate glycolysis intended for active packaging. in Cellulose. 2023;InPress.
doi:10.1007/s10570-023-05240-6 .

Erceg, Tamara, Vukić, Nevena, Šovljanski, Olja, Teofilović, Vesna, Porobić, Slavica, Baloš, Sebastian, Kojić, Sanja, Terek, Pal, Banjanin, Bojan, Rakić, Srđan, "Preparation and characterization of biodegradable cellulose acetate-based films with novel plasticizer obtained by polyethylene terephthalate glycolysis intended for active packaging" in Cellulose, InPress (2023),
https://doi.org/10.1007/s10570-023-05240-6 . .

TY  - JOUR
AU  - Vukmirović, Jelena
AU  - Joksović, Sara
AU  - Piper, Danica
AU  - Nesterović, Andrea
AU  - Novaković, Mirjana M.
AU  - Rakić, Srđan
AU  - Milanović, Marija
AU  - Srdić, Vladimir
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10456
AB  - Structure of epitaxial LaMnO3 thin films grown on different single crystal substrates by unconventional polymer assisted deposition (PAD) method was investigated. Epitaxial films were prepared from lanthanum manganite water based solutions deposited by spin coating on single crystal MgO (001), SrTiO3 (001) and SrTiO3 (110) substrates, and the influence of substrate type on the film structure was analysed. Better uniformity of the epitaxial LaMnO3 films on SrTiO3 substrates was obtained, but a non-stoichiometric La1-xMnO3 phase was formed after the heat treatment at 750 °C. In addition, the prepared thin films were multiple annealed at different temperatures up to 900 °C, in order to investigate importance of post-annealing treatment. Epitaxial nature of the prepared films was preserved after annealing at up to 900 °C and the structure rearrangement through formation of cell closer to bulk stochiometric LaMnO3 phase was observed.
T2  - Ceramics International
T1  - Epitaxial growth of LaMnO3 thin films on different single crystal substrates by polymer assisted deposition
VL  - 49
IS  - 2
SP  - 2366
EP  - 2372
DO  - 10.1016/j.ceramint.2022.09.207
ER  - 

@article{
author = "Vukmirović, Jelena and Joksović, Sara and Piper, Danica and Nesterović, Andrea and Novaković, Mirjana M. and Rakić, Srđan and Milanović, Marija and Srdić, Vladimir",
year = "2023",
abstract = "Structure of epitaxial LaMnO3 thin films grown on different single crystal substrates by unconventional polymer assisted deposition (PAD) method was investigated. Epitaxial films were prepared from lanthanum manganite water based solutions deposited by spin coating on single crystal MgO (001), SrTiO3 (001) and SrTiO3 (110) substrates, and the influence of substrate type on the film structure was analysed. Better uniformity of the epitaxial LaMnO3 films on SrTiO3 substrates was obtained, but a non-stoichiometric La1-xMnO3 phase was formed after the heat treatment at 750 °C. In addition, the prepared thin films were multiple annealed at different temperatures up to 900 °C, in order to investigate importance of post-annealing treatment. Epitaxial nature of the prepared films was preserved after annealing at up to 900 °C and the structure rearrangement through formation of cell closer to bulk stochiometric LaMnO3 phase was observed.",
journal = "Ceramics International",
title = "Epitaxial growth of LaMnO3 thin films on different single crystal substrates by polymer assisted deposition",
volume = "49",
number = "2",
pages = "2366-2372",
doi = "10.1016/j.ceramint.2022.09.207"
}

Vukmirović, J., Joksović, S., Piper, D., Nesterović, A., Novaković, M. M., Rakić, S., Milanović, M.,& Srdić, V.. (2023). Epitaxial growth of LaMnO3 thin films on different single crystal substrates by polymer assisted deposition. in Ceramics International, 49(2), 2366-2372.
https://doi.org/10.1016/j.ceramint.2022.09.207

Vukmirović J, Joksović S, Piper D, Nesterović A, Novaković MM, Rakić S, Milanović M, Srdić V. Epitaxial growth of LaMnO3 thin films on different single crystal substrates by polymer assisted deposition. in Ceramics International. 2023;49(2):2366-2372.
doi:10.1016/j.ceramint.2022.09.207 .

Vukmirović, Jelena, Joksović, Sara, Piper, Danica, Nesterović, Andrea, Novaković, Mirjana M., Rakić, Srđan, Milanović, Marija, Srdić, Vladimir, "Epitaxial growth of LaMnO3 thin films on different single crystal substrates by polymer assisted deposition" in Ceramics International, 49, no. 2 (2023):2366-2372,
https://doi.org/10.1016/j.ceramint.2022.09.207 . .

TY  - CONF
AU  - Vučinić-Vasić, Milica
AU  - Antić, Bratislav
AU  - Nikolić, Aleksandar S.
AU  - Kremenović, Aleksandar S.
AU  - Rakić, Srđan
AU  - Blanuša, Jovan
AU  - Cvjetićanin, Nikola
AU  - Kapor, Agneš
PY  - 2004
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9536
AB  - An order-disorder phase transition of nanosize Li-ferrite (Li0.50Fe2.50O4) was studied by DSC measurements and in situ XRPD technique. The phase transition temperature is found to be 762 °C (DSC) and (745±5) °C (XRPD).
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2004: 7th international conference on fundemental and applied aspract of physical chemistry
T1  - In situ XRPD and DSC study of order-disorder phase transition in nanosize Li-ferrite
VL  - 2
SP  - 508
EP  - 510
UR  - https://hdl.handle.net/21.15107/rcub_vinar_9536
ER  - 

@conference{
author = "Vučinić-Vasić, Milica and Antić, Bratislav and Nikolić, Aleksandar S. and Kremenović, Aleksandar S. and Rakić, Srđan and Blanuša, Jovan and Cvjetićanin, Nikola and Kapor, Agneš",
year = "2004",
abstract = "An order-disorder phase transition of nanosize Li-ferrite (Li0.50Fe2.50O4) was studied by DSC measurements and in situ XRPD technique. The phase transition temperature is found to be 762 °C (DSC) and (745±5) °C (XRPD).",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2004: 7th international conference on fundemental and applied aspract of physical chemistry",
title = "In situ XRPD and DSC study of order-disorder phase transition in nanosize Li-ferrite",
volume = "2",
pages = "508-510",
url = "https://hdl.handle.net/21.15107/rcub_vinar_9536"
}

Vučinić-Vasić, M., Antić, B., Nikolić, A. S., Kremenović, A. S., Rakić, S., Blanuša, J., Cvjetićanin, N.,& Kapor, A.. (2004). In situ XRPD and DSC study of order-disorder phase transition in nanosize Li-ferrite. in Physical chemistry 2004: 7th international conference on fundemental and applied aspract of physical chemistry
Society of Physical Chemists of Serbia., 2, 508-510.
https://hdl.handle.net/21.15107/rcub_vinar_9536

Vučinić-Vasić M, Antić B, Nikolić AS, Kremenović AS, Rakić S, Blanuša J, Cvjetićanin N, Kapor A. In situ XRPD and DSC study of order-disorder phase transition in nanosize Li-ferrite. in Physical chemistry 2004: 7th international conference on fundemental and applied aspract of physical chemistry. 2004;2:508-510.
https://hdl.handle.net/21.15107/rcub_vinar_9536 .

Vučinić-Vasić, Milica, Antić, Bratislav, Nikolić, Aleksandar S., Kremenović, Aleksandar S., Rakić, Srđan, Blanuša, Jovan, Cvjetićanin, Nikola, Kapor, Agneš, "In situ XRPD and DSC study of order-disorder phase transition in nanosize Li-ferrite" in Physical chemistry 2004: 7th international conference on fundemental and applied aspract of physical chemistry, 2 (2004):508-510,
https://hdl.handle.net/21.15107/rcub_vinar_9536 .