TY  - JOUR
AU  - Salah Adeen Embirsh, Hifa
AU  - Stajčić, Ivana
AU  - Gržetić, Jelena
AU  - Mladenović, Ivana O.
AU  - Anđelković, Boban
AU  - Marinković, Aleksandar
AU  - Vuksanović, Marija M.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11638
AB  - This paper presents sustainable technology for environmentally friendly composite production. Biobased unsaturated polyester resin (b-UPR), synthesized from waste polyethylene terephthalate (PET) glycosylate and renewable origin maleic anhydride (MAnh) and propylene glycol(PG), was reinforced with unmodified and vinyl-modified biosilica nanoparticles obtained fromrice husk. The structural and morphological properties of the obtained particles, b-UPR, as well ascomposites, were characterized by Fourier-transform infrared spectroscopy (FTIR), nuclear magneticresonance spectroscopy (NMR), scanning electron microscopy (SEM), and transmission electronmicroscopy (TEM) techniques. The study of the influence of biosilica modification on the mechanicalproperties of composites was supported by hardness modeling. Improvement of the tensile strengthof the b-UPR-based composite at 2.5 wt.% addition of biosilica modified with vinyl silane, named“b-UPR/SiO2-V” composite, has been achieved with 88% increase. The thermal aging process appliedto the b-UPR/SiO2-V composite, which simulates use over the product’s lifetime, leads to the deterioration of composites that were used as fillers in commercial unsaturated polyester resin (c-UPR).The grinded artificially aged b-UPR composites were used as filler in c-UPR for the production of atable top layer with outstanding mechanical properties, i.e., impact resistance and microhardness, aswell as fire resistance rated in the V-0 category according to the UL-94 test. Developing sustainablecomposites that are chemically synthesized from renewable sources is important from the aspect ofpreserving the environment and existing resources as well as the extending their life cycle.
T2  - Polymers
T1  - Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles
VL  - 15
IS  - 18
SP  - 3756
DO  - 10.3390/polym15183756
ER  - 

@article{
author = "Salah Adeen Embirsh, Hifa and Stajčić, Ivana and Gržetić, Jelena and Mladenović, Ivana O. and Anđelković, Boban and Marinković, Aleksandar and Vuksanović, Marija M.",
year = "2023",
abstract = "This paper presents sustainable technology for environmentally friendly composite production. Biobased unsaturated polyester resin (b-UPR), synthesized from waste polyethylene terephthalate (PET) glycosylate and renewable origin maleic anhydride (MAnh) and propylene glycol(PG), was reinforced with unmodified and vinyl-modified biosilica nanoparticles obtained fromrice husk. The structural and morphological properties of the obtained particles, b-UPR, as well ascomposites, were characterized by Fourier-transform infrared spectroscopy (FTIR), nuclear magneticresonance spectroscopy (NMR), scanning electron microscopy (SEM), and transmission electronmicroscopy (TEM) techniques. The study of the influence of biosilica modification on the mechanicalproperties of composites was supported by hardness modeling. Improvement of the tensile strengthof the b-UPR-based composite at 2.5 wt.% addition of biosilica modified with vinyl silane, named“b-UPR/SiO2-V” composite, has been achieved with 88% increase. The thermal aging process appliedto the b-UPR/SiO2-V composite, which simulates use over the product’s lifetime, leads to the deterioration of composites that were used as fillers in commercial unsaturated polyester resin (c-UPR).The grinded artificially aged b-UPR composites were used as filler in c-UPR for the production of atable top layer with outstanding mechanical properties, i.e., impact resistance and microhardness, aswell as fire resistance rated in the V-0 category according to the UL-94 test. Developing sustainablecomposites that are chemically synthesized from renewable sources is important from the aspect ofpreserving the environment and existing resources as well as the extending their life cycle.",
journal = "Polymers",
title = "Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles",
volume = "15",
number = "18",
pages = "3756",
doi = "10.3390/polym15183756"
}

Salah Adeen Embirsh, H., Stajčić, I., Gržetić, J., Mladenović, I. O., Anđelković, B., Marinković, A.,& Vuksanović, M. M.. (2023). Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles. in Polymers, 15(18), 3756.
https://doi.org/10.3390/polym15183756

Salah Adeen Embirsh H, Stajčić I, Gržetić J, Mladenović IO, Anđelković B, Marinković A, Vuksanović MM. Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles. in Polymers. 2023;15(18):3756.
doi:10.3390/polym15183756 .

Salah Adeen Embirsh, Hifa, Stajčić, Ivana, Gržetić, Jelena, Mladenović, Ivana O., Anđelković, Boban, Marinković, Aleksandar, Vuksanović, Marija M., "Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles" in Polymers, 15, no. 18 (2023):3756,
https://doi.org/10.3390/polym15183756 . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Jovanović, Aleksandar A.
AU  - Milošević, Milena D.
AU  - Gržetić, Jelena D.
AU  - Stajčić, Ivana
AU  - Jančić-Heinemann, Radmila
AU  - Marinković, Aleksandar D.
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10460
AB  - Predmet ovog istraživanja je sinteza glikolizata iz recikliranog poli(etilen tereftalata) (PET) postupcima depolimerizacije pomoću dietilenglikoala (DEG) u prisustvu katalizatora FASCAT 4100. Dobijeni glikolizat je zatim tretiran anhidridom maleinske kiseline i na kraju 2-oktanolom (2-EtHex pri čemu se dobija 2-EtHex/MA/DEG/PET/EG/MA/2-EtHex plastifikator. Karakterizacija dobijenog plastifikatora izvršena je infracrvenom spektroskopijom sa Furijeovom transformacijom (FTIR) i NRM spektroskopijom. Dobijeni plastifikatori (10 tež. %) su umešani u bitumen a zatim su izvršena ispitivanja mehaničkih svojstava dobijenih proizvoda.
AB  - The subject of this study is the synthesis of glycolysates from recycled poly (ethylene terephthalate) (PET) by depolymerization using diethylene glycol (DEG) in the presence of catalyst FASCAT 4100. The resulting glycolysate was then treated with maleic anhydride and finally with 2-octanol to obtain a 2-EtHex/MA/DEG/PET/EG/MA/2-EtHex plasticizer. The characterization of the obtained plasticizer was performed by infrared spectroscopy with Fourier transform (FTIR) and NMR spectroscopy. The obtained plasticizers were mixed into bitumen with 10 wt. % and tests of mechanical properties of obtained products were performed.
T2  - Tehnika - Novi materijali
T1  - Ispitivanje mehaničkih svojstava bitumenskih proizvoda dobijenih korišćenjem plastifikatora na bazi polietilen tereftalat-a
VL  - 77
IS  - 4
SP  - 413
EP  - 417
DO  - 10.5937/tehnika2204413V
ER  - 

@article{
author = "Vuksanović, Marija M. and Jovanović, Aleksandar A. and Milošević, Milena D. and Gržetić, Jelena D. and Stajčić, Ivana and Jančić-Heinemann, Radmila and Marinković, Aleksandar D.",
year = "2022",
abstract = "Predmet ovog istraživanja je sinteza glikolizata iz recikliranog poli(etilen tereftalata) (PET) postupcima depolimerizacije pomoću dietilenglikoala (DEG) u prisustvu katalizatora FASCAT 4100. Dobijeni glikolizat je zatim tretiran anhidridom maleinske kiseline i na kraju 2-oktanolom (2-EtHex pri čemu se dobija 2-EtHex/MA/DEG/PET/EG/MA/2-EtHex plastifikator. Karakterizacija dobijenog plastifikatora izvršena je infracrvenom spektroskopijom sa Furijeovom transformacijom (FTIR) i NRM spektroskopijom. Dobijeni plastifikatori (10 tež. %) su umešani u bitumen a zatim su izvršena ispitivanja mehaničkih svojstava dobijenih proizvoda., The subject of this study is the synthesis of glycolysates from recycled poly (ethylene terephthalate) (PET) by depolymerization using diethylene glycol (DEG) in the presence of catalyst FASCAT 4100. The resulting glycolysate was then treated with maleic anhydride and finally with 2-octanol to obtain a 2-EtHex/MA/DEG/PET/EG/MA/2-EtHex plasticizer. The characterization of the obtained plasticizer was performed by infrared spectroscopy with Fourier transform (FTIR) and NMR spectroscopy. The obtained plasticizers were mixed into bitumen with 10 wt. % and tests of mechanical properties of obtained products were performed.",
journal = "Tehnika - Novi materijali",
title = "Ispitivanje mehaničkih svojstava bitumenskih proizvoda dobijenih korišćenjem plastifikatora na bazi polietilen tereftalat-a",
volume = "77",
number = "4",
pages = "413-417",
doi = "10.5937/tehnika2204413V"
}

Vuksanović, M. M., Jovanović, A. A., Milošević, M. D., Gržetić, J. D., Stajčić, I., Jančić-Heinemann, R.,& Marinković, A. D.. (2022). Ispitivanje mehaničkih svojstava bitumenskih proizvoda dobijenih korišćenjem plastifikatora na bazi polietilen tereftalat-a. in Tehnika - Novi materijali, 77(4), 413-417.
https://doi.org/10.5937/tehnika2204413V

Vuksanović MM, Jovanović AA, Milošević MD, Gržetić JD, Stajčić I, Jančić-Heinemann R, Marinković AD. Ispitivanje mehaničkih svojstava bitumenskih proizvoda dobijenih korišćenjem plastifikatora na bazi polietilen tereftalat-a. in Tehnika - Novi materijali. 2022;77(4):413-417.
doi:10.5937/tehnika2204413V .

Vuksanović, Marija M., Jovanović, Aleksandar A., Milošević, Milena D., Gržetić, Jelena D., Stajčić, Ivana, Jančić-Heinemann, Radmila, Marinković, Aleksandar D., "Ispitivanje mehaničkih svojstava bitumenskih proizvoda dobijenih korišćenjem plastifikatora na bazi polietilen tereftalat-a" in Tehnika - Novi materijali, 77, no. 4 (2022):413-417,
https://doi.org/10.5937/tehnika2204413V . .

TY  - CONF
AU  - Čutović, Natalija
AU  - Vuksanović, Marija M.
AU  - Milošević, Milena
AU  - Bugarčić, Mladen
AU  - Bošnjaković, Jovana
AU  - Gržetić, Jelena
AU  - Marinković, Aleksandar
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10674
AB  - Due to the increasing use and widespread of plastics, poly (ethylene terephthalate) (PET) and poly (vinyl chloride) (PVC) are becoming one of the major threats to the environment. The aim of this paper is obtaining plasticizers from recycled PET, and hot/cold mixing thereof with PVC to produce new materials. Plasticizer was obtained from PET using ethylene glycol (EG) in the presence of catalyst FASCAT 4100, followed by treatment with maleic anhydride and finally 2-ethylhexanol (2-EtHex). The obtained glycolysate and plasticizer, individually or mixtures thereof, were used for the production of polygranulates based on waste PVC in order to obtain an expanded mass of homogenized PVC with glycolysate/plasticizer. The abovementioned procedures and test results for the regranulates and products indicate that the proposed technology offers a solution to the problem of waste PET and PVC through transesterification in order to obtain plasticizer based on PET and EG, called 2-EtHex/MA/РG/PET/EG/MA/2-EtHex used in the processing of PVC waste and in regranulate. The obtained regranulates are further processed by injection molding or extrusion into commercial products such as slippers, footwear, boots, garden hoses, mats, floor mats, etc.
PB  - University of Belgrade, Technical Faculty in Bor
C3  - EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings
T1  - Recycled Poly(ethylene Terephthalate) Based-Plasticizer for PVC Regranulates Production
SP  - 452
EP  - 458
UR  - https://hdl.handle.net/21.15107/rcub_vinar_10674
ER  - 

@conference{
author = "Čutović, Natalija and Vuksanović, Marija M. and Milošević, Milena and Bugarčić, Mladen and Bošnjaković, Jovana and Gržetić, Jelena and Marinković, Aleksandar",
year = "2022",
abstract = "Due to the increasing use and widespread of plastics, poly (ethylene terephthalate) (PET) and poly (vinyl chloride) (PVC) are becoming one of the major threats to the environment. The aim of this paper is obtaining plasticizers from recycled PET, and hot/cold mixing thereof with PVC to produce new materials. Plasticizer was obtained from PET using ethylene glycol (EG) in the presence of catalyst FASCAT 4100, followed by treatment with maleic anhydride and finally 2-ethylhexanol (2-EtHex). The obtained glycolysate and plasticizer, individually or mixtures thereof, were used for the production of polygranulates based on waste PVC in order to obtain an expanded mass of homogenized PVC with glycolysate/plasticizer. The abovementioned procedures and test results for the regranulates and products indicate that the proposed technology offers a solution to the problem of waste PET and PVC through transesterification in order to obtain plasticizer based on PET and EG, called 2-EtHex/MA/РG/PET/EG/MA/2-EtHex used in the processing of PVC waste and in regranulate. The obtained regranulates are further processed by injection molding or extrusion into commercial products such as slippers, footwear, boots, garden hoses, mats, floor mats, etc.",
publisher = "University of Belgrade, Technical Faculty in Bor",
journal = "EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings",
title = "Recycled Poly(ethylene Terephthalate) Based-Plasticizer for PVC Regranulates Production",
pages = "452-458",
url = "https://hdl.handle.net/21.15107/rcub_vinar_10674"
}

Čutović, N., Vuksanović, M. M., Milošević, M., Bugarčić, M., Bošnjaković, J., Gržetić, J.,& Marinković, A.. (2022). Recycled Poly(ethylene Terephthalate) Based-Plasticizer for PVC Regranulates Production. in EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings
University of Belgrade, Technical Faculty in Bor., 452-458.
https://hdl.handle.net/21.15107/rcub_vinar_10674

Čutović N, Vuksanović MM, Milošević M, Bugarčić M, Bošnjaković J, Gržetić J, Marinković A. Recycled Poly(ethylene Terephthalate) Based-Plasticizer for PVC Regranulates Production. in EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings. 2022;:452-458.
https://hdl.handle.net/21.15107/rcub_vinar_10674 .

Čutović, Natalija, Vuksanović, Marija M., Milošević, Milena, Bugarčić, Mladen, Bošnjaković, Jovana, Gržetić, Jelena, Marinković, Aleksandar, "Recycled Poly(ethylene Terephthalate) Based-Plasticizer for PVC Regranulates Production" in EcoTER’22 : 29th International Conference Ecological Truth and Environmental Research : Proceedings (2022):452-458,
https://hdl.handle.net/21.15107/rcub_vinar_10674 .

TY  - JOUR
AU  - Jelić, Aleksandra
AU  - Sekulić, Milica
AU  - Travica, Milan
AU  - Gržetić, Jelena
AU  - Ugrinović, Vukašin
AU  - Marinković, Aleksandar D.
AU  - Božić, Aleksandra
AU  - Stamenović, Marina
AU  - Putić, Slaviša
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10237
AB  - In this study, silicate nanofillers; dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite; were synthesized using four different methods and incorporated into the epoxy resin to improve its mechanical properties. Characterization of the newly synthesized nanofillers was performed using Fourier-transformation infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The purpose of this study was to analyze newly developed composite materials reinforced with silicate nanoparticles utilizing tensile testing and a full-field non-contact 3D Digital Image Correlation (DIC) method. Analysis of deformation and displacement fields gives precise material behavior during testing. Testing results allowed a more reliable assessment of the structural integrity of epoxy composite materials reinforced using different silicate nanofillers. It was concluded that the addition of 3% of dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite lead to the increasement of tensile strength up to 31.5%, 29.0%, 27.5%, and 23.5% in comparison with neat epoxy, respectively. In order to offer more trustworthy information about the viscoelastic behavior of neat epoxy and composites, a dynamic mechanical analysis (DMA) was also performed and rheological measurements of uncured epoxy matrix and epoxy suspensions were obtained.
T2  - Polymers
T1  - Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC)
VL  - 14
IS  - 6
SP  - 1255
DO  - 10.3390/polym14061255
ER  - 

@article{
author = "Jelić, Aleksandra and Sekulić, Milica and Travica, Milan and Gržetić, Jelena and Ugrinović, Vukašin and Marinković, Aleksandar D. and Božić, Aleksandra and Stamenović, Marina and Putić, Slaviša",
year = "2022",
abstract = "In this study, silicate nanofillers; dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite; were synthesized using four different methods and incorporated into the epoxy resin to improve its mechanical properties. Characterization of the newly synthesized nanofillers was performed using Fourier-transformation infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The purpose of this study was to analyze newly developed composite materials reinforced with silicate nanoparticles utilizing tensile testing and a full-field non-contact 3D Digital Image Correlation (DIC) method. Analysis of deformation and displacement fields gives precise material behavior during testing. Testing results allowed a more reliable assessment of the structural integrity of epoxy composite materials reinforced using different silicate nanofillers. It was concluded that the addition of 3% of dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite lead to the increasement of tensile strength up to 31.5%, 29.0%, 27.5%, and 23.5% in comparison with neat epoxy, respectively. In order to offer more trustworthy information about the viscoelastic behavior of neat epoxy and composites, a dynamic mechanical analysis (DMA) was also performed and rheological measurements of uncured epoxy matrix and epoxy suspensions were obtained.",
journal = "Polymers",
title = "Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC)",
volume = "14",
number = "6",
pages = "1255",
doi = "10.3390/polym14061255"
}

Jelić, A., Sekulić, M., Travica, M., Gržetić, J., Ugrinović, V., Marinković, A. D., Božić, A., Stamenović, M.,& Putić, S.. (2022). Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC). in Polymers, 14(6), 1255.
https://doi.org/10.3390/polym14061255

Jelić A, Sekulić M, Travica M, Gržetić J, Ugrinović V, Marinković AD, Božić A, Stamenović M, Putić S. Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC). in Polymers. 2022;14(6):1255.
doi:10.3390/polym14061255 .

Jelić, Aleksandra, Sekulić, Milica, Travica, Milan, Gržetić, Jelena, Ugrinović, Vukašin, Marinković, Aleksandar D., Božić, Aleksandra, Stamenović, Marina, Putić, Slaviša, "Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC)" in Polymers, 14, no. 6 (2022):1255,
https://doi.org/10.3390/polym14061255 . .