TY  - JOUR
AU  - Soldera, F
AU  - Ilić, N.
AU  - Conesa, NM
AU  - Barrientos, I
AU  - Mucklich, F
PY  - 2005
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2834
AB  - The influence of the microstructure on the oxidation behavior of two-phase near stoichiometric RuAl produced by arc melting was investigated. The oxidation was conducted at 1000 degreesC. The oxide scale growth and phase formation were studied using scanning electron microscopy, focused ion beam microscopy and in situ X-ray diffraction. The microstructure of the samples consisted of RuAl grains with continuous or isolated intergranular phase composed of Ru(Al) or Ru(Al)-RuAl eutectic. The Ru(Al) intergranular layer is prone to oxidation, which was not observed in samples with intergranular Ru(Al)-RuAl eutectic. Porous, poor-protective alpha-Al2O3 scales were formed. A region with periodic Aluminum oxide/Ruthenium oxide banded layers was developed beneath the external alpha-Al2O3 scale. Scale growth follows a linear rate law. (C) 2005 Elsevier Ltd. All rights reserved.
T2  - Intermetallics
T1  - Influence of the microstructure on the formation of alumina scales on near stoichiometric RuAl produced by arc melting
VL  - 13
IS  - 1
SP  - 101
EP  - 107
DO  - 10.1016/j.intermet.2004.06.002
ER  - 

@article{
author = "Soldera, F and Ilić, N. and Conesa, NM and Barrientos, I and Mucklich, F",
year = "2005",
abstract = "The influence of the microstructure on the oxidation behavior of two-phase near stoichiometric RuAl produced by arc melting was investigated. The oxidation was conducted at 1000 degreesC. The oxide scale growth and phase formation were studied using scanning electron microscopy, focused ion beam microscopy and in situ X-ray diffraction. The microstructure of the samples consisted of RuAl grains with continuous or isolated intergranular phase composed of Ru(Al) or Ru(Al)-RuAl eutectic. The Ru(Al) intergranular layer is prone to oxidation, which was not observed in samples with intergranular Ru(Al)-RuAl eutectic. Porous, poor-protective alpha-Al2O3 scales were formed. A region with periodic Aluminum oxide/Ruthenium oxide banded layers was developed beneath the external alpha-Al2O3 scale. Scale growth follows a linear rate law. (C) 2005 Elsevier Ltd. All rights reserved.",
journal = "Intermetallics",
title = "Influence of the microstructure on the formation of alumina scales on near stoichiometric RuAl produced by arc melting",
volume = "13",
number = "1",
pages = "101-107",
doi = "10.1016/j.intermet.2004.06.002"
}

Soldera, F., Ilić, N., Conesa, N., Barrientos, I.,& Mucklich, F.. (2005). Influence of the microstructure on the formation of alumina scales on near stoichiometric RuAl produced by arc melting. in Intermetallics, 13(1), 101-107.
https://doi.org/10.1016/j.intermet.2004.06.002

Soldera F, Ilić N, Conesa N, Barrientos I, Mucklich F. Influence of the microstructure on the formation of alumina scales on near stoichiometric RuAl produced by arc melting. in Intermetallics. 2005;13(1):101-107.
doi:10.1016/j.intermet.2004.06.002 .

Soldera, F, Ilić, N., Conesa, NM, Barrientos, I, Mucklich, F, "Influence of the microstructure on the formation of alumina scales on near stoichiometric RuAl produced by arc melting" in Intermetallics, 13, no. 1 (2005):101-107,
https://doi.org/10.1016/j.intermet.2004.06.002 . .

TY  - JOUR
AU  - Ilić, N.
AU  - Jovanović, Milan T.
AU  - Radmilović, Velimir
AU  - Drobnjak, Đorđe
PY  - 2005
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2563
AB  - The manifestations of dynamic strain ageing in a commercial 2090 Al - Li alloy were investigated in a wide range of temperatures (-40 to 100 degrees C) and strain rates (4.16x10(-5) to 4.16x10(-3) s(-1)). Serrated yielding, as a macroscopic manifestation of dynamic strain ageing, occurs under all testing conditions. Negative strain-rate sensitivity of the flow stress is also observed. Temperature rise and strain rate reduction cause the increase of the yield strength and the work-hardening rate, as well as the decrease of elongation - the behavior being typical for the range in which C-type serrations appear. These phenomena are related to the dislocation substructure, in which features characteristic for solute atoms blocking of dislocations and Orowan bypassing are observed.
T2  - Zeitschrift fur Metallkunde
T1  - Manifestations of dynamic strain ageing in 2090 Al-Li alloy
VL  - 96
IS  - 12
SP  - 1386
EP  - 1390
UR  - https://hdl.handle.net/21.15107/rcub_vinar_2563
ER  - 

@article{
author = "Ilić, N. and Jovanović, Milan T. and Radmilović, Velimir and Drobnjak, Đorđe",
year = "2005",
abstract = "The manifestations of dynamic strain ageing in a commercial 2090 Al - Li alloy were investigated in a wide range of temperatures (-40 to 100 degrees C) and strain rates (4.16x10(-5) to 4.16x10(-3) s(-1)). Serrated yielding, as a macroscopic manifestation of dynamic strain ageing, occurs under all testing conditions. Negative strain-rate sensitivity of the flow stress is also observed. Temperature rise and strain rate reduction cause the increase of the yield strength and the work-hardening rate, as well as the decrease of elongation - the behavior being typical for the range in which C-type serrations appear. These phenomena are related to the dislocation substructure, in which features characteristic for solute atoms blocking of dislocations and Orowan bypassing are observed.",
journal = "Zeitschrift fur Metallkunde",
title = "Manifestations of dynamic strain ageing in 2090 Al-Li alloy",
volume = "96",
number = "12",
pages = "1386-1390",
url = "https://hdl.handle.net/21.15107/rcub_vinar_2563"
}

Ilić, N., Jovanović, M. T., Radmilović, V.,& Drobnjak, Đ.. (2005). Manifestations of dynamic strain ageing in 2090 Al-Li alloy. in Zeitschrift fur Metallkunde, 96(12), 1386-1390.
https://hdl.handle.net/21.15107/rcub_vinar_2563

Ilić N, Jovanović MT, Radmilović V, Drobnjak Đ. Manifestations of dynamic strain ageing in 2090 Al-Li alloy. in Zeitschrift fur Metallkunde. 2005;96(12):1386-1390.
https://hdl.handle.net/21.15107/rcub_vinar_2563 .

Ilić, N., Jovanović, Milan T., Radmilović, Velimir, Drobnjak, Đorđe, "Manifestations of dynamic strain ageing in 2090 Al-Li alloy" in Zeitschrift fur Metallkunde, 96, no. 12 (2005):1386-1390,
https://hdl.handle.net/21.15107/rcub_vinar_2563 .

TY  - JOUR
AU  - Bobić, Ilija
AU  - Jovanović, Milan T.
AU  - Ilić, N.
PY  - 2003
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2611
AB  - Two Zn-27Al-3Cu-3Al(2)O(3) (wt.%) composites with different particle size (approximately 12 and 250 mum) of Al2O3 powder were produced by a compocasting process, i.e. Al2O3 particles were continuously added to a semi-solid melt which was vigorously stirred. Comparative investigations of microstructure [scanning electron microscope (SEM), energy dispersive spectrometry (EDS)] and compression strength (from room temperature to 170 degreesC) of as-cast alloy and composites were carried out. Composites exhibit higher strength than the as-cast alloy. The strengthening effect of smaller Al2O3 particles is more pronounced than the effect of much larger particles. (C) 2002 Elsevier Science B.V. All rights reserved.
T2  - Materials Letters
T1  - Microstructure and strength of ZA-27-based composites reinforced with Al2O3 particles
VL  - 57
IS  - 11
SP  - 1683
EP  - 1688
DO  - 10.1016/S0167-577X(02)01052-2
ER  - 

@article{
author = "Bobić, Ilija and Jovanović, Milan T. and Ilić, N.",
year = "2003",
abstract = "Two Zn-27Al-3Cu-3Al(2)O(3) (wt.%) composites with different particle size (approximately 12 and 250 mum) of Al2O3 powder were produced by a compocasting process, i.e. Al2O3 particles were continuously added to a semi-solid melt which was vigorously stirred. Comparative investigations of microstructure [scanning electron microscope (SEM), energy dispersive spectrometry (EDS)] and compression strength (from room temperature to 170 degreesC) of as-cast alloy and composites were carried out. Composites exhibit higher strength than the as-cast alloy. The strengthening effect of smaller Al2O3 particles is more pronounced than the effect of much larger particles. (C) 2002 Elsevier Science B.V. All rights reserved.",
journal = "Materials Letters",
title = "Microstructure and strength of ZA-27-based composites reinforced with Al2O3 particles",
volume = "57",
number = "11",
pages = "1683-1688",
doi = "10.1016/S0167-577X(02)01052-2"
}

Bobić, I., Jovanović, M. T.,& Ilić, N.. (2003). Microstructure and strength of ZA-27-based composites reinforced with Al2O3 particles. in Materials Letters, 57(11), 1683-1688.
https://doi.org/10.1016/S0167-577X(02)01052-2

Bobić I, Jovanović MT, Ilić N. Microstructure and strength of ZA-27-based composites reinforced with Al2O3 particles. in Materials Letters. 2003;57(11):1683-1688.
doi:10.1016/S0167-577X(02)01052-2 .

Bobić, Ilija, Jovanović, Milan T., Ilić, N., "Microstructure and strength of ZA-27-based composites reinforced with Al2O3 particles" in Materials Letters, 57, no. 11 (2003):1683-1688,
https://doi.org/10.1016/S0167-577X(02)01052-2 . .

TY  - JOUR
AU  - Živković, Predrag M.
AU  - Jovanović, Slobodan
AU  - Popov, Konstantin I.
AU  - Ilić, Nenad
PY  - 2000
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2405
AB  - Aluminum as the base of offset printing plates should make good contact with wetting agents and the light sensitive layer and should be resistant to wear and cracking. In order to achieve this, the aluminum is roughened and eventually anodized. A thin, electrochemically deposited chromium layer is used as the non-printing element in bimetallic offset printing forms. Chromium shows excellent wettability and wear resistance. The possibility of chemical deposition of chromium on aluminum from an alkaline solution is examined in this paper The presence of chromium was confirmed and measured by EDAX. A difference in the spectral reflection characteristic between chromium-treated and non-treated specimens was also detected. An influence of a chromium layer on an aluminum surface was examined by water drop spreading. Chromium-treated samples showed better wettability than non-treated samples, but they are less wettable than anodized samples.
T2  - Journal of the Serbian Chemical Society
T1  - Modification of the aluminum for making offset printing plates
VL  - 65
IS  - 12
SP  - 935
EP  - 938
DO  - 10.2298/jsc0012935z
UR  - https://hdl.handle.net/21.15107/rcub_vinar_2405
ER  - 

@article{
author = "Živković, Predrag M. and Jovanović, Slobodan and Popov, Konstantin I. and Ilić, Nenad",
year = "2000",
abstract = "Aluminum as the base of offset printing plates should make good contact with wetting agents and the light sensitive layer and should be resistant to wear and cracking. In order to achieve this, the aluminum is roughened and eventually anodized. A thin, electrochemically deposited chromium layer is used as the non-printing element in bimetallic offset printing forms. Chromium shows excellent wettability and wear resistance. The possibility of chemical deposition of chromium on aluminum from an alkaline solution is examined in this paper The presence of chromium was confirmed and measured by EDAX. A difference in the spectral reflection characteristic between chromium-treated and non-treated specimens was also detected. An influence of a chromium layer on an aluminum surface was examined by water drop spreading. Chromium-treated samples showed better wettability than non-treated samples, but they are less wettable than anodized samples.",
journal = "Journal of the Serbian Chemical Society",
title = "Modification of the aluminum for making offset printing plates",
volume = "65",
number = "12",
pages = "935-938",
doi = "10.2298/jsc0012935z",
url = "https://hdl.handle.net/21.15107/rcub_vinar_2405"
}

Živković, P. M., Jovanović, S., Popov, K. I.,& Ilić, N.. (2000). Modification of the aluminum for making offset printing plates. in Journal of the Serbian Chemical Society, 65(12), 935-938.
https://doi.org/10.2298/jsc0012935z
https://hdl.handle.net/21.15107/rcub_vinar_2405

Živković PM, Jovanović S, Popov KI, Ilić N. Modification of the aluminum for making offset printing plates. in Journal of the Serbian Chemical Society. 2000;65(12):935-938.
doi:10.2298/jsc0012935z
https://hdl.handle.net/21.15107/rcub_vinar_2405 .

Živković, Predrag M., Jovanović, Slobodan, Popov, Konstantin I., Ilić, Nenad, "Modification of the aluminum for making offset printing plates" in Journal of the Serbian Chemical Society, 65, no. 12 (2000):935-938,
https://doi.org/10.2298/jsc0012935z .,
https://hdl.handle.net/21.15107/rcub_vinar_2405 .

TY  - JOUR
AU  - Stanković, Aleksandra
AU  - Ilić, N.
AU  - Žunić, Zora S.
AU  - Glišić, Sanja
AU  - Alavantić, Dragan
PY  - 1999
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2307
AB  - We have determined frequencies of alleles and genotypes at angiotensinl-converting enzyme (ACE) locus by polymerase chain reaction (PCR) in the healthy population of Belgrade. We also studied the association of this polymorphism with blood pressure (BP) level. When we controlled the other cardiovascular risk factors, moderate association of borderline significance between DD genotype and hypertension (HT) (OR = 1.88, 95% CI, 1.00 to 3.56, P = 0.050) was noted. We concluded that DD genotype of ACE locus predicts HT independently of other factors. No significant effect of the ACE gene polymorphism on systolic and diastolic BP is found by MANCOVA. We hypothesize that ACE is not involved as much in determining the BP values as it is involved in modulation of blood-pressure genes.
T2  - Jugoslovenska Medicinska Biohemija
T1  - Association of the insertion/deletion polymorphism at the angiotensin I-converting enzyme locus with arterial blood pressure: Population-based study
VL  - 18
IS  - 4
SP  - 141
EP  - 147
UR  - https://hdl.handle.net/21.15107/rcub_vinar_2307
ER  - 

@article{
author = "Stanković, Aleksandra and Ilić, N. and Žunić, Zora S. and Glišić, Sanja and Alavantić, Dragan",
year = "1999",
abstract = "We have determined frequencies of alleles and genotypes at angiotensinl-converting enzyme (ACE) locus by polymerase chain reaction (PCR) in the healthy population of Belgrade. We also studied the association of this polymorphism with blood pressure (BP) level. When we controlled the other cardiovascular risk factors, moderate association of borderline significance between DD genotype and hypertension (HT) (OR = 1.88, 95% CI, 1.00 to 3.56, P = 0.050) was noted. We concluded that DD genotype of ACE locus predicts HT independently of other factors. No significant effect of the ACE gene polymorphism on systolic and diastolic BP is found by MANCOVA. We hypothesize that ACE is not involved as much in determining the BP values as it is involved in modulation of blood-pressure genes.",
journal = "Jugoslovenska Medicinska Biohemija",
title = "Association of the insertion/deletion polymorphism at the angiotensin I-converting enzyme locus with arterial blood pressure: Population-based study",
volume = "18",
number = "4",
pages = "141-147",
url = "https://hdl.handle.net/21.15107/rcub_vinar_2307"
}

Stanković, A., Ilić, N., Žunić, Z. S., Glišić, S.,& Alavantić, D.. (1999). Association of the insertion/deletion polymorphism at the angiotensin I-converting enzyme locus with arterial blood pressure: Population-based study. in Jugoslovenska Medicinska Biohemija, 18(4), 141-147.
https://hdl.handle.net/21.15107/rcub_vinar_2307

Stanković A, Ilić N, Žunić ZS, Glišić S, Alavantić D. Association of the insertion/deletion polymorphism at the angiotensin I-converting enzyme locus with arterial blood pressure: Population-based study. in Jugoslovenska Medicinska Biohemija. 1999;18(4):141-147.
https://hdl.handle.net/21.15107/rcub_vinar_2307 .

Stanković, Aleksandra, Ilić, N., Žunić, Zora S., Glišić, Sanja, Alavantić, Dragan, "Association of the insertion/deletion polymorphism at the angiotensin I-converting enzyme locus with arterial blood pressure: Population-based study" in Jugoslovenska Medicinska Biohemija, 18, no. 4 (1999):141-147,
https://hdl.handle.net/21.15107/rcub_vinar_2307 .

TY  - JOUR
AU  - Ilić, N.
AU  - Jovanović, Milan T.
AU  - Todorović, M
AU  - Trtanj, M
AU  - Šaponjić, Petar
PY  - 1999
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2303
AB  - This paper describes a comparative study of the hardness characteristics, mechanical properties, microstructures, and fracture mechanisms of the thermite welded rail steel joints before and after heat treatment. It has been found that heat treatment of the welded joint improves the mechanical properties (UTS and elongation), and changes the fracture mechanism from brittle to ductile. Improved strength and elongation are attributed to the finer ferrite-pearlite microstructure and the different fracture mechanism. Microporosity and numerous inclusions were seen on the fracture surface of the welded joint. The chemical composition of the inclusions indicated that the molten thermite mixture had reacted with the magnesite lining of the ladle and the feeder. (C) Elsevier Science Inc., 1999. All rights reserved.
T2  - Materials Characterization
T1  - Microstructural and mechanical characterization of postweld heat-treated thermite weld in rails
VL  - 43
IS  - 4
SP  - 243
EP  - 250
DO  - 10.1016/S1044-5803(99)00006-6
ER  - 

@article{
author = "Ilić, N. and Jovanović, Milan T. and Todorović, M and Trtanj, M and Šaponjić, Petar",
year = "1999",
abstract = "This paper describes a comparative study of the hardness characteristics, mechanical properties, microstructures, and fracture mechanisms of the thermite welded rail steel joints before and after heat treatment. It has been found that heat treatment of the welded joint improves the mechanical properties (UTS and elongation), and changes the fracture mechanism from brittle to ductile. Improved strength and elongation are attributed to the finer ferrite-pearlite microstructure and the different fracture mechanism. Microporosity and numerous inclusions were seen on the fracture surface of the welded joint. The chemical composition of the inclusions indicated that the molten thermite mixture had reacted with the magnesite lining of the ladle and the feeder. (C) Elsevier Science Inc., 1999. All rights reserved.",
journal = "Materials Characterization",
title = "Microstructural and mechanical characterization of postweld heat-treated thermite weld in rails",
volume = "43",
number = "4",
pages = "243-250",
doi = "10.1016/S1044-5803(99)00006-6"
}

Ilić, N., Jovanović, M. T., Todorović, M., Trtanj, M.,& Šaponjić, P.. (1999). Microstructural and mechanical characterization of postweld heat-treated thermite weld in rails. in Materials Characterization, 43(4), 243-250.
https://doi.org/10.1016/S1044-5803(99)00006-6

Ilić N, Jovanović MT, Todorović M, Trtanj M, Šaponjić P. Microstructural and mechanical characterization of postweld heat-treated thermite weld in rails. in Materials Characterization. 1999;43(4):243-250.
doi:10.1016/S1044-5803(99)00006-6 .

Ilić, N., Jovanović, Milan T., Todorović, M, Trtanj, M, Šaponjić, Petar, "Microstructural and mechanical characterization of postweld heat-treated thermite weld in rails" in Materials Characterization, 43, no. 4 (1999):243-250,
https://doi.org/10.1016/S1044-5803(99)00006-6 . .

TY  - JOUR
AU  - Božić, Dušan
AU  - Ilić, Nenad
AU  - Jovanović, Milan T.
PY  - 1998
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2118
T2  - Journal of Materials Science Letters
T1  - Ageing of Cu-Cr powders produced by rotating electrode process (REP)
VL  - 17
IS  - 7
SP  - 587
EP  - 589
DO  - 10.1023/A:1006586023522
ER  - 

@article{
author = "Božić, Dušan and Ilić, Nenad and Jovanović, Milan T.",
year = "1998",
journal = "Journal of Materials Science Letters",
title = "Ageing of Cu-Cr powders produced by rotating electrode process (REP)",
volume = "17",
number = "7",
pages = "587-589",
doi = "10.1023/A:1006586023522"
}

Božić, D., Ilić, N.,& Jovanović, M. T.. (1998). Ageing of Cu-Cr powders produced by rotating electrode process (REP). in Journal of Materials Science Letters, 17(7), 587-589.
https://doi.org/10.1023/A:1006586023522

Božić D, Ilić N, Jovanović MT. Ageing of Cu-Cr powders produced by rotating electrode process (REP). in Journal of Materials Science Letters. 1998;17(7):587-589.
doi:10.1023/A:1006586023522 .

Božić, Dušan, Ilić, Nenad, Jovanović, Milan T., "Ageing of Cu-Cr powders produced by rotating electrode process (REP)" in Journal of Materials Science Letters, 17, no. 7 (1998):587-589,
https://doi.org/10.1023/A:1006586023522 . .

TY  - JOUR
AU  - Jovanović, Milan T.
AU  - Božić, Dušan
AU  - Ilić, N.
AU  - Mitkov, Mirjana V.
AU  - Zdujić, Miodrag
PY  - 1996
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7210
AB  - Intermetallic compounds have long been recognized as potentially useful structural materials, Ni3Al aluminides possess excellent oxidation resistance at high temperatures as well as good high-temperature strength, This paper reviews the progress which has been made during the last few years in the research and development of Ni3Al aluminides. Comparative results on microstructural and mechanical properties (compression) of Ni3Al-base aluminide produced by powder metallurgy (PM), vacuum melting and casting processes have been reported. Fine-grained PM aluminide exhibits the higher strength than the coarse-grained as-cast material. Ductility is not significantly affected by the grain size.
T2  - Materials Science Forum
T1  - Structure, properties and application of Ni3Al aluminides
VL  - 214
SP  - 257
EP  - 264
DO  - 10.4028/www.scientific.net/MSF.214.257
ER  - 

@article{
author = "Jovanović, Milan T. and Božić, Dušan and Ilić, N. and Mitkov, Mirjana V. and Zdujić, Miodrag",
year = "1996",
abstract = "Intermetallic compounds have long been recognized as potentially useful structural materials, Ni3Al aluminides possess excellent oxidation resistance at high temperatures as well as good high-temperature strength, This paper reviews the progress which has been made during the last few years in the research and development of Ni3Al aluminides. Comparative results on microstructural and mechanical properties (compression) of Ni3Al-base aluminide produced by powder metallurgy (PM), vacuum melting and casting processes have been reported. Fine-grained PM aluminide exhibits the higher strength than the coarse-grained as-cast material. Ductility is not significantly affected by the grain size.",
journal = "Materials Science Forum",
title = "Structure, properties and application of Ni3Al aluminides",
volume = "214",
pages = "257-264",
doi = "10.4028/www.scientific.net/MSF.214.257"
}

Jovanović, M. T., Božić, D., Ilić, N., Mitkov, M. V.,& Zdujić, M.. (1996). Structure, properties and application of Ni3Al aluminides. in Materials Science Forum, 214, 257-264.
https://doi.org/10.4028/www.scientific.net/MSF.214.257

Jovanović MT, Božić D, Ilić N, Mitkov MV, Zdujić M. Structure, properties and application of Ni3Al aluminides. in Materials Science Forum. 1996;214:257-264.
doi:10.4028/www.scientific.net/MSF.214.257 .

Jovanović, Milan T., Božić, Dušan, Ilić, N., Mitkov, Mirjana V., Zdujić, Miodrag, "Structure, properties and application of Ni3Al aluminides" in Materials Science Forum, 214 (1996):257-264,
https://doi.org/10.4028/www.scientific.net/MSF.214.257 . .

TY  - JOUR
AU  - Božić, Dušan
AU  - Ilić, N.
AU  - Mitkov, Mirjana V.
AU  - Jovanović, Milan T.
AU  - Zdujić, Miodrag
PY  - 1996
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1993
AB  - A comparative study of the microstructure, mechanical properties and fractography of Ni3Al macro- and microalloyed intermetallics produced by powder metallurgy (PM) and standard vacuum melting and casting processes has been carried out. Non-porous PM compacts were obtained by vacuum hot pressing of powders produced either by gas atomization or by a rotating electrode process. All materials showed a positive temperature dependence of the compression yield strength. The maximum strength was attained between 600 and 700 degrees C, then the decrease occurs. With increase in temperature the ductility of all materials slightly decreased to a minimum and then abruptly increased. Values of mechanical properties of PM compacts were higher than those of as-cast material. There is a correlation between the fracture morphology and the ductility of Ni3Al, i.e. the higher ductility corresponds to transgranular fracture, while the minimum ductility is a consequence of intergranular fracture.
T2  - Journal of Materials Science
T1  - A comparative study of microstructure, mechanical and fracture properties of Ni3Al-based intermetallics produced by powder metallurgy and standard melting and casting processes
VL  - 31
IS  - 12
SP  - 3213
EP  - 3221
DO  - 10.1007/BF00354671
ER  - 

@article{
author = "Božić, Dušan and Ilić, N. and Mitkov, Mirjana V. and Jovanović, Milan T. and Zdujić, Miodrag",
year = "1996",
abstract = "A comparative study of the microstructure, mechanical properties and fractography of Ni3Al macro- and microalloyed intermetallics produced by powder metallurgy (PM) and standard vacuum melting and casting processes has been carried out. Non-porous PM compacts were obtained by vacuum hot pressing of powders produced either by gas atomization or by a rotating electrode process. All materials showed a positive temperature dependence of the compression yield strength. The maximum strength was attained between 600 and 700 degrees C, then the decrease occurs. With increase in temperature the ductility of all materials slightly decreased to a minimum and then abruptly increased. Values of mechanical properties of PM compacts were higher than those of as-cast material. There is a correlation between the fracture morphology and the ductility of Ni3Al, i.e. the higher ductility corresponds to transgranular fracture, while the minimum ductility is a consequence of intergranular fracture.",
journal = "Journal of Materials Science",
title = "A comparative study of microstructure, mechanical and fracture properties of Ni3Al-based intermetallics produced by powder metallurgy and standard melting and casting processes",
volume = "31",
number = "12",
pages = "3213-3221",
doi = "10.1007/BF00354671"
}

Božić, D., Ilić, N., Mitkov, M. V., Jovanović, M. T.,& Zdujić, M.. (1996). A comparative study of microstructure, mechanical and fracture properties of Ni3Al-based intermetallics produced by powder metallurgy and standard melting and casting processes. in Journal of Materials Science, 31(12), 3213-3221.
https://doi.org/10.1007/BF00354671

Božić D, Ilić N, Mitkov MV, Jovanović MT, Zdujić M. A comparative study of microstructure, mechanical and fracture properties of Ni3Al-based intermetallics produced by powder metallurgy and standard melting and casting processes. in Journal of Materials Science. 1996;31(12):3213-3221.
doi:10.1007/BF00354671 .

Božić, Dušan, Ilić, N., Mitkov, Mirjana V., Jovanović, Milan T., Zdujić, Miodrag, "A comparative study of microstructure, mechanical and fracture properties of Ni3Al-based intermetallics produced by powder metallurgy and standard melting and casting processes" in Journal of Materials Science, 31, no. 12 (1996):3213-3221,
https://doi.org/10.1007/BF00354671 . .

TY  - JOUR
AU  - Ilić, Nenad
AU  - Drobnjak, Đorđe
AU  - Radmilović, Velimir
AU  - Jovanović, Milan T.
AU  - Marković, Dragana
PY  - 1996
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1962
T2  - Scripta Materialia
T1  - Serrated yielding in Al-Li base alloys
VL  - 34
IS  - 7
SP  - 1123
EP  - 1130
DO  - 10.1016/1359-6462(95)00627-3
ER  - 

@article{
author = "Ilić, Nenad and Drobnjak, Đorđe and Radmilović, Velimir and Jovanović, Milan T. and Marković, Dragana",
year = "1996",
journal = "Scripta Materialia",
title = "Serrated yielding in Al-Li base alloys",
volume = "34",
number = "7",
pages = "1123-1130",
doi = "10.1016/1359-6462(95)00627-3"
}

Ilić, N., Drobnjak, Đ., Radmilović, V., Jovanović, M. T.,& Marković, D.. (1996). Serrated yielding in Al-Li base alloys. in Scripta Materialia, 34(7), 1123-1130.
https://doi.org/10.1016/1359-6462(95)00627-3

Ilić N, Drobnjak Đ, Radmilović V, Jovanović MT, Marković D. Serrated yielding in Al-Li base alloys. in Scripta Materialia. 1996;34(7):1123-1130.
doi:10.1016/1359-6462(95)00627-3 .

Ilić, Nenad, Drobnjak, Đorđe, Radmilović, Velimir, Jovanović, Milan T., Marković, Dragana, "Serrated yielding in Al-Li base alloys" in Scripta Materialia, 34, no. 7 (1996):1123-1130,
https://doi.org/10.1016/1359-6462(95)00627-3 . .