TY  - JOUR
AU  - Purenović, Jelena M.
AU  - Dučić, Nedeljko
AU  - Matović, Branko
AU  - Purenović, Milovan M.
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7773
AB  - Modified porous alumo-silicate ceramics, alloyed with magnesium and microalloyed with aluminum, belongs to modern multifunctional ceramic materials. Microalloying has led to important changes in dielectric and electrical properties of ceramics, such as dielectric constant and electrical resistance. These changes are conditioned by the microstructural properties of modified porous ceramics. The obtained results have shown the unity of the influence of composition, structure, morphology and application of microalloyed multifunctional alumosilicate ceramics on electrophysical properties. Microstructural investigations have shown that this type of ceramics has an amorphous-crystal structure, which causes important changes in its electrical properties and affects its activity. Therefore the ceramics can be considered as an active dielectric. A correlation between microstructural properties and structurally sensitive, i.e. electrophysical properties of microalloyed multifunctional alumo-silicate ceramics, was confirmed.
T2  - Serbian Journal of Electrical Engineering
T1  - The influence of multifunctional microalloyed ceramics microstructure on its capacity properties
VL  - 15
IS  - 2
SP  - 187
EP  - 199
DO  - 10.2298/SJEE180203003P
ER  - 

@article{
author = "Purenović, Jelena M. and Dučić, Nedeljko and Matović, Branko and Purenović, Milovan M.",
year = "2018",
abstract = "Modified porous alumo-silicate ceramics, alloyed with magnesium and microalloyed with aluminum, belongs to modern multifunctional ceramic materials. Microalloying has led to important changes in dielectric and electrical properties of ceramics, such as dielectric constant and electrical resistance. These changes are conditioned by the microstructural properties of modified porous ceramics. The obtained results have shown the unity of the influence of composition, structure, morphology and application of microalloyed multifunctional alumosilicate ceramics on electrophysical properties. Microstructural investigations have shown that this type of ceramics has an amorphous-crystal structure, which causes important changes in its electrical properties and affects its activity. Therefore the ceramics can be considered as an active dielectric. A correlation between microstructural properties and structurally sensitive, i.e. electrophysical properties of microalloyed multifunctional alumo-silicate ceramics, was confirmed.",
journal = "Serbian Journal of Electrical Engineering",
title = "The influence of multifunctional microalloyed ceramics microstructure on its capacity properties",
volume = "15",
number = "2",
pages = "187-199",
doi = "10.2298/SJEE180203003P"
}

Purenović, J. M., Dučić, N., Matović, B.,& Purenović, M. M.. (2018). The influence of multifunctional microalloyed ceramics microstructure on its capacity properties. in Serbian Journal of Electrical Engineering, 15(2), 187-199.
https://doi.org/10.2298/SJEE180203003P

Purenović JM, Dučić N, Matović B, Purenović MM. The influence of multifunctional microalloyed ceramics microstructure on its capacity properties. in Serbian Journal of Electrical Engineering. 2018;15(2):187-199.
doi:10.2298/SJEE180203003P .

Purenović, Jelena M., Dučić, Nedeljko, Matović, Branko, Purenović, Milovan M., "The influence of multifunctional microalloyed ceramics microstructure on its capacity properties" in Serbian Journal of Electrical Engineering, 15, no. 2 (2018):187-199,
https://doi.org/10.2298/SJEE180203003P . .

TY  - JOUR
AU  - Purenović, Jelena M.
AU  - Ranđelović, Marjan S.
AU  - Momčilović, Milan Z.
AU  - Purenović, Milovan M.
AU  - Stanković, Novica J.
AU  - Anđelković, Ljiljana N.
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1363
AB  - The physicochemical modification of peat through thermal and oxidation processes was carried out, in order to obtain new, inexpensive and active material for purification of different types of waters. During the modification, surface chemical compounds of Shilov type were formed. Batch adsorption properties and suitability of physicochemically modified peat (PCMP) for odor removal were tested in aqueous solutions of H2S and colloidal sulphur. Additionally, PCMP was tested in the removal of As(V) which is hazardous ingredient in contaminated waters. Possible mechanisms of pollutants binding include interactions, which lead to formation of adducts and clathrates. All these processes are elucidated in detail. The results showed that the obtained material can be used for the removal of sulphide, colloidal sulphur and As(V) from different types of waters.
T2  - Hemijska industrija
T1  - Physicochemically modified peat by thermal and oxidation processes as an active material for purification of wastewaters from certain hazardous pollutants
VL  - 71
IS  - 4
SP  - 299
EP  - 306
DO  - 10.2298/HEMIND160522040P
ER  - 

@article{
author = "Purenović, Jelena M. and Ranđelović, Marjan S. and Momčilović, Milan Z. and Purenović, Milovan M. and Stanković, Novica J. and Anđelković, Ljiljana N.",
year = "2017",
abstract = "The physicochemical modification of peat through thermal and oxidation processes was carried out, in order to obtain new, inexpensive and active material for purification of different types of waters. During the modification, surface chemical compounds of Shilov type were formed. Batch adsorption properties and suitability of physicochemically modified peat (PCMP) for odor removal were tested in aqueous solutions of H2S and colloidal sulphur. Additionally, PCMP was tested in the removal of As(V) which is hazardous ingredient in contaminated waters. Possible mechanisms of pollutants binding include interactions, which lead to formation of adducts and clathrates. All these processes are elucidated in detail. The results showed that the obtained material can be used for the removal of sulphide, colloidal sulphur and As(V) from different types of waters.",
journal = "Hemijska industrija",
title = "Physicochemically modified peat by thermal and oxidation processes as an active material for purification of wastewaters from certain hazardous pollutants",
volume = "71",
number = "4",
pages = "299-306",
doi = "10.2298/HEMIND160522040P"
}

Purenović, J. M., Ranđelović, M. S., Momčilović, M. Z., Purenović, M. M., Stanković, N. J.,& Anđelković, L. N.. (2017). Physicochemically modified peat by thermal and oxidation processes as an active material for purification of wastewaters from certain hazardous pollutants. in Hemijska industrija, 71(4), 299-306.
https://doi.org/10.2298/HEMIND160522040P

Purenović JM, Ranđelović MS, Momčilović MZ, Purenović MM, Stanković NJ, Anđelković LN. Physicochemically modified peat by thermal and oxidation processes as an active material for purification of wastewaters from certain hazardous pollutants. in Hemijska industrija. 2017;71(4):299-306.
doi:10.2298/HEMIND160522040P .

Purenović, Jelena M., Ranđelović, Marjan S., Momčilović, Milan Z., Purenović, Milovan M., Stanković, Novica J., Anđelković, Ljiljana N., "Physicochemically modified peat by thermal and oxidation processes as an active material for purification of wastewaters from certain hazardous pollutants" in Hemijska industrija, 71, no. 4 (2017):299-306,
https://doi.org/10.2298/HEMIND160522040P . .

TY  - JOUR
AU  - Momčilović, Milan Z.
AU  - Ranđelović, Marjan S.
AU  - Purenović, Milovan M.
AU  - Đorđević, Jelena S.
AU  - Onjia, Antonije E.
AU  - Matović, Branko
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1015
AB  - Pollution control and water purification are the main concerns associated with hazardous component eliminations from wastewaters which have inspired the research, among the others, on various clay minerals as useful adsorbents. The aim of this study was to examine morphological, structural, adsorption, and electrochemical characteristics of serpentinite in order to check its potential for removal of cadmium and textile dyes from synthetic waters. SEM technique has provided a detailed insight into the surface morphology of serpentinite indicating irregularly shaped particles and lamellar aggregates which are characteristic of lizardite mineral. Crystal phases detected in composition of serpentinite by using XRD technique are lizardite and tiny amount of periclase. Serpentinite adsorption characteristics were investigated towards Cd2+ and anionic textile dyes (Procion red MX-5B, Procion orange and Ramazol black) in aqueous solutions. The main goal of the study was the reliable removal of hazardous Cd2+ at low initial concentrations (up to 200 mu g/dm(3)). Textile dyes were taken as the models of anionic organic pollutants in water. All the adsorption experiments were carried out in batch conditions by varying initial parameters such as concentration of pollutant, contact time, mass of adsorbent and pH. Based on the obtained results, serpentinite has proven to be efficient adsorbent with removal efficiency over 98% for the selected pollutants. Native serpentinite was further modified in order to obtain forsterite. Electrochemical characteristics of serpentinite and forsterite were examined by using cyclic voltammetry of solution of 0.1 M H2SO4 as acidic supporting electrolyte and K-4[Fe(CN)(6)] which was chosen as a redox model compound. Due to its specific structure, surface groups, morphology, and non-stoichiometric composition, serpentinite and forsterite exhibited prominent electrocatalytic activity. (C) 2016 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Separation and Purification Technology
T1  - Morpho-structural, adsorption and electrochemical characteristics of serpentinite
VL  - 163
SP  - 72
EP  - 78
DO  - 10.1016/j.seppur.2016.02.042
ER  - 

@article{
author = "Momčilović, Milan Z. and Ranđelović, Marjan S. and Purenović, Milovan M. and Đorđević, Jelena S. and Onjia, Antonije E. and Matović, Branko",
year = "2016",
abstract = "Pollution control and water purification are the main concerns associated with hazardous component eliminations from wastewaters which have inspired the research, among the others, on various clay minerals as useful adsorbents. The aim of this study was to examine morphological, structural, adsorption, and electrochemical characteristics of serpentinite in order to check its potential for removal of cadmium and textile dyes from synthetic waters. SEM technique has provided a detailed insight into the surface morphology of serpentinite indicating irregularly shaped particles and lamellar aggregates which are characteristic of lizardite mineral. Crystal phases detected in composition of serpentinite by using XRD technique are lizardite and tiny amount of periclase. Serpentinite adsorption characteristics were investigated towards Cd2+ and anionic textile dyes (Procion red MX-5B, Procion orange and Ramazol black) in aqueous solutions. The main goal of the study was the reliable removal of hazardous Cd2+ at low initial concentrations (up to 200 mu g/dm(3)). Textile dyes were taken as the models of anionic organic pollutants in water. All the adsorption experiments were carried out in batch conditions by varying initial parameters such as concentration of pollutant, contact time, mass of adsorbent and pH. Based on the obtained results, serpentinite has proven to be efficient adsorbent with removal efficiency over 98% for the selected pollutants. Native serpentinite was further modified in order to obtain forsterite. Electrochemical characteristics of serpentinite and forsterite were examined by using cyclic voltammetry of solution of 0.1 M H2SO4 as acidic supporting electrolyte and K-4[Fe(CN)(6)] which was chosen as a redox model compound. Due to its specific structure, surface groups, morphology, and non-stoichiometric composition, serpentinite and forsterite exhibited prominent electrocatalytic activity. (C) 2016 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Separation and Purification Technology",
title = "Morpho-structural, adsorption and electrochemical characteristics of serpentinite",
volume = "163",
pages = "72-78",
doi = "10.1016/j.seppur.2016.02.042"
}

Momčilović, M. Z., Ranđelović, M. S., Purenović, M. M., Đorđević, J. S., Onjia, A. E.,& Matović, B.. (2016). Morpho-structural, adsorption and electrochemical characteristics of serpentinite. in Separation and Purification Technology
Elsevier., 163, 72-78.
https://doi.org/10.1016/j.seppur.2016.02.042

Momčilović MZ, Ranđelović MS, Purenović MM, Đorđević JS, Onjia AE, Matović B. Morpho-structural, adsorption and electrochemical characteristics of serpentinite. in Separation and Purification Technology. 2016;163:72-78.
doi:10.1016/j.seppur.2016.02.042 .

Momčilović, Milan Z., Ranđelović, Marjan S., Purenović, Milovan M., Đorđević, Jelena S., Onjia, Antonije E., Matović, Branko, "Morpho-structural, adsorption and electrochemical characteristics of serpentinite" in Separation and Purification Technology, 163 (2016):72-78,
https://doi.org/10.1016/j.seppur.2016.02.042 . .

TY  - JOUR
AU  - Ranđelović, Marjan S.
AU  - Momčilović, Milan Z.
AU  - Purenović, Milovan M.
AU  - Zarubica, Aleksandra R.
AU  - Bojić, Aleksandar Lj.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1076
AB  - Samples of natural peat (NP) were hydrothermally treated at different temperatures in oxidative and acidic aqueous medium to tailor their acid-base, adsorption, morphological and other properties. The obtained materials were thoroughly characterized by SEM, XRD and FTIR techniques, followed by determination of pH(pzc), examination of adsorption characteristics and the extent of organic matter leaching in water. Acid-base characteristics of these materials were examined by potentiometric and conductometric titration of corresponding aqueous suspensions. Experimental potentiometric data were interpreted using ProtoFit software (NEM, non-electrostatic model) which provided pKa values and concentrations of surface sites which are compared with corresponding values obtained by conductometric titration method. There are two main types of surface groups (carboxylic and phenolic) that are dominant in the materials and determine their acid-base behavior in the aqueous medium. Temperature during oxidative hydrothermal treatment has no significant effect on the total number of surface groups, but influences the ratio of carboxylic and phenol-type groups. Hence, acid-base properties of peat can be tailored, which is useful in designing and improving adsorptive characteristics of peat for the preferential removal of certain pollutants from water.
PB  - Springer
T2  - Environmental Earth Sciences
T1  - The acid-base, morphological and structural properties of new biosorbent obtained by oxidative hydrothermal treatment of peat
VL  - 75
IS  - 9
DO  - 10.1007/s12665-016-5242-0
ER  - 

@article{
author = "Ranđelović, Marjan S. and Momčilović, Milan Z. and Purenović, Milovan M. and Zarubica, Aleksandra R. and Bojić, Aleksandar Lj.",
year = "2016",
abstract = "Samples of natural peat (NP) were hydrothermally treated at different temperatures in oxidative and acidic aqueous medium to tailor their acid-base, adsorption, morphological and other properties. The obtained materials were thoroughly characterized by SEM, XRD and FTIR techniques, followed by determination of pH(pzc), examination of adsorption characteristics and the extent of organic matter leaching in water. Acid-base characteristics of these materials were examined by potentiometric and conductometric titration of corresponding aqueous suspensions. Experimental potentiometric data were interpreted using ProtoFit software (NEM, non-electrostatic model) which provided pKa values and concentrations of surface sites which are compared with corresponding values obtained by conductometric titration method. There are two main types of surface groups (carboxylic and phenolic) that are dominant in the materials and determine their acid-base behavior in the aqueous medium. Temperature during oxidative hydrothermal treatment has no significant effect on the total number of surface groups, but influences the ratio of carboxylic and phenol-type groups. Hence, acid-base properties of peat can be tailored, which is useful in designing and improving adsorptive characteristics of peat for the preferential removal of certain pollutants from water.",
publisher = "Springer",
journal = "Environmental Earth Sciences",
title = "The acid-base, morphological and structural properties of new biosorbent obtained by oxidative hydrothermal treatment of peat",
volume = "75",
number = "9",
doi = "10.1007/s12665-016-5242-0"
}

Ranđelović, M. S., Momčilović, M. Z., Purenović, M. M., Zarubica, A. R.,& Bojić, A. Lj.. (2016). The acid-base, morphological and structural properties of new biosorbent obtained by oxidative hydrothermal treatment of peat. in Environmental Earth Sciences
Springer., 75(9).
https://doi.org/10.1007/s12665-016-5242-0

Ranđelović MS, Momčilović MZ, Purenović MM, Zarubica AR, Bojić AL. The acid-base, morphological and structural properties of new biosorbent obtained by oxidative hydrothermal treatment of peat. in Environmental Earth Sciences. 2016;75(9).
doi:10.1007/s12665-016-5242-0 .

Ranđelović, Marjan S., Momčilović, Milan Z., Purenović, Milovan M., Zarubica, Aleksandra R., Bojić, Aleksandar Lj., "The acid-base, morphological and structural properties of new biosorbent obtained by oxidative hydrothermal treatment of peat" in Environmental Earth Sciences, 75, no. 9 (2016),
https://doi.org/10.1007/s12665-016-5242-0 . .

TY  - JOUR
AU  - Purenović, Jelena M.
AU  - Ranđelović, Marjan S.
AU  - Matović, Branko
AU  - Purenović, Milovan M.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/424
AB  - Microalloyed and alloyed aluminium-silicate ceramics represents multiphase and multifunctional solid-solid system. The microstructure of aluminium-silicate ceramics matrix is arranged with favorable relationship between crystallinity and amorphousness. Numbered physical processes and interactions take place in very complex intergranular and interphase areas, making new boundaries and regions with fractal nature. Fractal nature of grains contours, macro, mezzo and micro pores and nanostructure phases at grain boundaries make this ceramics an active dielectric material. The synergistic effect of additives, dislocations and impurities leads to dislocations movement at grain boundaries and fragmentation of existing grains in a large number of micrograins with distinct fractal nature. Hence, permanent change of micromorphology occurs in intergranular area. Fractal analysis of intergranular microstructure has included application of Minkowski layer, correlated with fractal dimension. It represents convex layer of grains contour roughness and irregularity, determined in accordance with grain contours fractality. The introduction of fractal microstructure analysis allows better interpretation of many physical and physico-chemical processes, bearing in mind that Minkowski layer defines grains contact probability. (C) 2015 Elsevier B.V. All rights reserved.
T2  - Applied Surface Science
T1  - Application of Minkowski layer for intergranular fractal surfaces of multiphase active microalloyed and alloyed aluminium-silicate ceramics
VL  - 332
SP  - 440
EP  - 455
DO  - 10.1016/j.apsusc.2015.01.162
ER  - 

@article{
author = "Purenović, Jelena M. and Ranđelović, Marjan S. and Matović, Branko and Purenović, Milovan M.",
year = "2015",
abstract = "Microalloyed and alloyed aluminium-silicate ceramics represents multiphase and multifunctional solid-solid system. The microstructure of aluminium-silicate ceramics matrix is arranged with favorable relationship between crystallinity and amorphousness. Numbered physical processes and interactions take place in very complex intergranular and interphase areas, making new boundaries and regions with fractal nature. Fractal nature of grains contours, macro, mezzo and micro pores and nanostructure phases at grain boundaries make this ceramics an active dielectric material. The synergistic effect of additives, dislocations and impurities leads to dislocations movement at grain boundaries and fragmentation of existing grains in a large number of micrograins with distinct fractal nature. Hence, permanent change of micromorphology occurs in intergranular area. Fractal analysis of intergranular microstructure has included application of Minkowski layer, correlated with fractal dimension. It represents convex layer of grains contour roughness and irregularity, determined in accordance with grain contours fractality. The introduction of fractal microstructure analysis allows better interpretation of many physical and physico-chemical processes, bearing in mind that Minkowski layer defines grains contact probability. (C) 2015 Elsevier B.V. All rights reserved.",
journal = "Applied Surface Science",
title = "Application of Minkowski layer for intergranular fractal surfaces of multiphase active microalloyed and alloyed aluminium-silicate ceramics",
volume = "332",
pages = "440-455",
doi = "10.1016/j.apsusc.2015.01.162"
}

Purenović, J. M., Ranđelović, M. S., Matović, B.,& Purenović, M. M.. (2015). Application of Minkowski layer for intergranular fractal surfaces of multiphase active microalloyed and alloyed aluminium-silicate ceramics. in Applied Surface Science, 332, 440-455.
https://doi.org/10.1016/j.apsusc.2015.01.162

Purenović JM, Ranđelović MS, Matović B, Purenović MM. Application of Minkowski layer for intergranular fractal surfaces of multiphase active microalloyed and alloyed aluminium-silicate ceramics. in Applied Surface Science. 2015;332:440-455.
doi:10.1016/j.apsusc.2015.01.162 .

Purenović, Jelena M., Ranđelović, Marjan S., Matović, Branko, Purenović, Milovan M., "Application of Minkowski layer for intergranular fractal surfaces of multiphase active microalloyed and alloyed aluminium-silicate ceramics" in Applied Surface Science, 332 (2015):440-455,
https://doi.org/10.1016/j.apsusc.2015.01.162 . .

TY  - JOUR
AU  - Ranđelović, Marjan S.
AU  - Purenović, Milovan M.
AU  - Matović, Branko
AU  - Zarubica, Aleksandra R.
AU  - Momčilović, Milan Z.
AU  - Purenović, Jelena M.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6042
AB  - An application of coatings composed of mixed (hydr)oxides over bentonite particles in aqueous suspension, in narrow range of pH, has been proven as a useful method for obtaining bentonite based composite with a developed, specific surface area and pronounced adsorption features toward cationic pollutants. This paper deals with detailed characterization of structure as well as textural and adsorption properties of bentonite based composite. The structure of the composite was examined by using XRD technique providing results that confirm changes in orientation of layered quasi-crystalline particles of montmorillonite, which is the most common component of bentonite clay. Surface area and pore volumes were determined by N-2 adsorption at -196 degrees C using BET, t-plot, alpha(s)-plot, Dubinin Radushkevich and Dolli-more Heal method. The results have revealed that the specific surface area for composite is about two times higher than for starting bentonite. Moreover, modification of bentonite leads to significant changes in the meso- and microporosity. Adsorption properties of the composite were studied by analyzing the adsorption of dye methylene blue which was used in this study as a model of cationic pollutant in water. The most prominent role in the mechanism of dye molecules retention on the surface, interlayers and in the pores of the adsorbent is ascribed to establishing of electrostatic, van der Waals and hydrogen bonds. The shape of adsorption isotherm indicates that methylene blue can be adsorbed onto composite in more than one layer. (C) 2014 Elsevier Inc. All rights reserved.
T2  - Microporous and Mesoporous Materials
T1  - Structural, textural and adsorption characteristics of bentonite-based composite
VL  - 195
SP  - 67
EP  - 74
DO  - 10.1016/j.micromeso.2014.03.031
ER  - 

@article{
author = "Ranđelović, Marjan S. and Purenović, Milovan M. and Matović, Branko and Zarubica, Aleksandra R. and Momčilović, Milan Z. and Purenović, Jelena M.",
year = "2014",
abstract = "An application of coatings composed of mixed (hydr)oxides over bentonite particles in aqueous suspension, in narrow range of pH, has been proven as a useful method for obtaining bentonite based composite with a developed, specific surface area and pronounced adsorption features toward cationic pollutants. This paper deals with detailed characterization of structure as well as textural and adsorption properties of bentonite based composite. The structure of the composite was examined by using XRD technique providing results that confirm changes in orientation of layered quasi-crystalline particles of montmorillonite, which is the most common component of bentonite clay. Surface area and pore volumes were determined by N-2 adsorption at -196 degrees C using BET, t-plot, alpha(s)-plot, Dubinin Radushkevich and Dolli-more Heal method. The results have revealed that the specific surface area for composite is about two times higher than for starting bentonite. Moreover, modification of bentonite leads to significant changes in the meso- and microporosity. Adsorption properties of the composite were studied by analyzing the adsorption of dye methylene blue which was used in this study as a model of cationic pollutant in water. The most prominent role in the mechanism of dye molecules retention on the surface, interlayers and in the pores of the adsorbent is ascribed to establishing of electrostatic, van der Waals and hydrogen bonds. The shape of adsorption isotherm indicates that methylene blue can be adsorbed onto composite in more than one layer. (C) 2014 Elsevier Inc. All rights reserved.",
journal = "Microporous and Mesoporous Materials",
title = "Structural, textural and adsorption characteristics of bentonite-based composite",
volume = "195",
pages = "67-74",
doi = "10.1016/j.micromeso.2014.03.031"
}

Ranđelović, M. S., Purenović, M. M., Matović, B., Zarubica, A. R., Momčilović, M. Z.,& Purenović, J. M.. (2014). Structural, textural and adsorption characteristics of bentonite-based composite. in Microporous and Mesoporous Materials, 195, 67-74.
https://doi.org/10.1016/j.micromeso.2014.03.031

Ranđelović MS, Purenović MM, Matović B, Zarubica AR, Momčilović MZ, Purenović JM. Structural, textural and adsorption characteristics of bentonite-based composite. in Microporous and Mesoporous Materials. 2014;195:67-74.
doi:10.1016/j.micromeso.2014.03.031 .

Ranđelović, Marjan S., Purenović, Milovan M., Matović, Branko, Zarubica, Aleksandra R., Momčilović, Milan Z., Purenović, Jelena M., "Structural, textural and adsorption characteristics of bentonite-based composite" in Microporous and Mesoporous Materials, 195 (2014):67-74,
https://doi.org/10.1016/j.micromeso.2014.03.031 . .

TY  - JOUR
AU  - Momčilović, Milan Z.
AU  - Ranđelović, Marjan S.
AU  - Purenović, Milovan M.
AU  - Onjia, Antonije E.
AU  - Babić, Biljana M.
AU  - Matović, Branko
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/211
AB  - Carbon cryogel (CC) has been prepared through sol gel polycondensation of resorcinol with formaldehyde in basic aqueous solution followed by freeze-drying and carbonization. Porous properties of CC analyzed by gravimetric McBain method confirmed the expected surface area and degree of mesoporosity. Obtained powdered material was used for the removal of pesticide imidacloprid from aqueous solutions under regular batch adsorption procedure. A set of several isotherm models including Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Brouers-Sotolongo, Redlich-Peterson, Sips, Toth, Jovanovic, Hurkins-Jura, Halsey and Radke-Prausnitz model was used for nonlinear fitting of equilibrium data. Several models fitted with quite high correlation coefficients. Bangham and Elovich model fitted suitably for kinetic study indicating that pesticide diffusion into carbons pores is important step which dictates the process rate. Suitability of kinetic models decreased with the increase in adsorbent dosage. Imidacloprid uptake was not influenced by the solution pH.
T2  - Desalination and Water Treatment
T1  - Synthesis and characterization of resorcinol formaldehyde carbon cryogel as efficient sorbent for imidacloprid removal
VL  - 52
IS  - 37-39
SP  - 7306
EP  - 7316
DO  - 10.1080/19443994.2013.836993
ER  - 

@article{
author = "Momčilović, Milan Z. and Ranđelović, Marjan S. and Purenović, Milovan M. and Onjia, Antonije E. and Babić, Biljana M. and Matović, Branko",
year = "2014",
abstract = "Carbon cryogel (CC) has been prepared through sol gel polycondensation of resorcinol with formaldehyde in basic aqueous solution followed by freeze-drying and carbonization. Porous properties of CC analyzed by gravimetric McBain method confirmed the expected surface area and degree of mesoporosity. Obtained powdered material was used for the removal of pesticide imidacloprid from aqueous solutions under regular batch adsorption procedure. A set of several isotherm models including Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Brouers-Sotolongo, Redlich-Peterson, Sips, Toth, Jovanovic, Hurkins-Jura, Halsey and Radke-Prausnitz model was used for nonlinear fitting of equilibrium data. Several models fitted with quite high correlation coefficients. Bangham and Elovich model fitted suitably for kinetic study indicating that pesticide diffusion into carbons pores is important step which dictates the process rate. Suitability of kinetic models decreased with the increase in adsorbent dosage. Imidacloprid uptake was not influenced by the solution pH.",
journal = "Desalination and Water Treatment",
title = "Synthesis and characterization of resorcinol formaldehyde carbon cryogel as efficient sorbent for imidacloprid removal",
volume = "52",
number = "37-39",
pages = "7306-7316",
doi = "10.1080/19443994.2013.836993"
}

Momčilović, M. Z., Ranđelović, M. S., Purenović, M. M., Onjia, A. E., Babić, B. M.,& Matović, B.. (2014). Synthesis and characterization of resorcinol formaldehyde carbon cryogel as efficient sorbent for imidacloprid removal. in Desalination and Water Treatment, 52(37-39), 7306-7316.
https://doi.org/10.1080/19443994.2013.836993

Momčilović MZ, Ranđelović MS, Purenović MM, Onjia AE, Babić BM, Matović B. Synthesis and characterization of resorcinol formaldehyde carbon cryogel as efficient sorbent for imidacloprid removal. in Desalination and Water Treatment. 2014;52(37-39):7306-7316.
doi:10.1080/19443994.2013.836993 .

Momčilović, Milan Z., Ranđelović, Marjan S., Purenović, Milovan M., Onjia, Antonije E., Babić, Biljana M., Matović, Branko, "Synthesis and characterization of resorcinol formaldehyde carbon cryogel as efficient sorbent for imidacloprid removal" in Desalination and Water Treatment, 52, no. 37-39 (2014):7306-7316,
https://doi.org/10.1080/19443994.2013.836993 . .

TY  - CONF
AU  - Purenović, Jelena M.
AU  - Mitić, Vojislav V.
AU  - Ranđelović, Marjan S.
AU  - Matović, Branko
AU  - Purenović, Milovan M.
PY  - 2013
UR  - http://dais.sanu.ac.rs/123456789/420
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7430
AB  - In this paper, dielectric characterization of porous alumo-silicate ceramics, modified by alloying with magnesium and microalloying with aluminum, was investigated. Microstructure investigations have revealed non-uniform and highly porous structure with broad distribution of grain size, specifically shaped grains and high degree of agglomeration. Complex multiphase system, as active microalloyed ceramics, has specific behavior under external electrical field influence. Dielectric properties (the changes of permittivity, electrical resistivity, dielectric losses and impedance) were measured in the frequency range 20 Hz – 1 MHz. All characteristics showed nonlinear distribution and complex functional dependences because of significant nonhomogeneity of active microalloyed ceramics. Values for permittivity ranged between 140 – 430. Order of magnitude for electrical resistivity was about 106 Ωm, for impedance 104 – 108 Ω, and loss tangent had values much greater than 0.05. Mathematical model of linear regression was applied on the dielectric characterization results. Consistency with experimental data was approved, since the values for correlation coefficient r and determination coefficient r2 were obtained near value 1.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : 2nd Serbian Ceramic Society Conference : program and the book of abstracts; September 30 - October 1, 2013; Belgrade
T1  - Dielectric characterization of microalloyed alumo-silicate ceramics by using linear regression model
SP  - 42
EP  - 42
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7430
ER  - 

@conference{
author = "Purenović, Jelena M. and Mitić, Vojislav V. and Ranđelović, Marjan S. and Matović, Branko and Purenović, Milovan M.",
year = "2013",
abstract = "In this paper, dielectric characterization of porous alumo-silicate ceramics, modified by alloying with magnesium and microalloying with aluminum, was investigated. Microstructure investigations have revealed non-uniform and highly porous structure with broad distribution of grain size, specifically shaped grains and high degree of agglomeration. Complex multiphase system, as active microalloyed ceramics, has specific behavior under external electrical field influence. Dielectric properties (the changes of permittivity, electrical resistivity, dielectric losses and impedance) were measured in the frequency range 20 Hz – 1 MHz. All characteristics showed nonlinear distribution and complex functional dependences because of significant nonhomogeneity of active microalloyed ceramics. Values for permittivity ranged between 140 – 430. Order of magnitude for electrical resistivity was about 106 Ωm, for impedance 104 – 108 Ω, and loss tangent had values much greater than 0.05. Mathematical model of linear regression was applied on the dielectric characterization results. Consistency with experimental data was approved, since the values for correlation coefficient r and determination coefficient r2 were obtained near value 1.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : 2nd Serbian Ceramic Society Conference : program and the book of abstracts; September 30 - October 1, 2013; Belgrade",
title = "Dielectric characterization of microalloyed alumo-silicate ceramics by using linear regression model",
pages = "42-42",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7430"
}

Purenović, J. M., Mitić, V. V., Ranđelović, M. S., Matović, B.,& Purenović, M. M.. (2013). Dielectric characterization of microalloyed alumo-silicate ceramics by using linear regression model. in Advanced Ceramics and Application : 2nd Serbian Ceramic Society Conference : program and the book of abstracts; September 30 - October 1, 2013; Belgrade
Belgrade : Serbian Ceramic Society., 42-42.
https://hdl.handle.net/21.15107/rcub_vinar_7430

Purenović JM, Mitić VV, Ranđelović MS, Matović B, Purenović MM. Dielectric characterization of microalloyed alumo-silicate ceramics by using linear regression model. in Advanced Ceramics and Application : 2nd Serbian Ceramic Society Conference : program and the book of abstracts; September 30 - October 1, 2013; Belgrade. 2013;:42-42.
https://hdl.handle.net/21.15107/rcub_vinar_7430 .

Purenović, Jelena M., Mitić, Vojislav V., Ranđelović, Marjan S., Matović, Branko, Purenović, Milovan M., "Dielectric characterization of microalloyed alumo-silicate ceramics by using linear regression model" in Advanced Ceramics and Application : 2nd Serbian Ceramic Society Conference : program and the book of abstracts; September 30 - October 1, 2013; Belgrade (2013):42-42,
https://hdl.handle.net/21.15107/rcub_vinar_7430 .

TY  - CONF
AU  - Purenović, Jelena M.
AU  - Mitić, Vojislav V.
AU  - Kocić, Ljubiša
AU  - Ranđelović, Marjan S.
AU  - Matović, Branko
AU  - Purenović, Milovan M.
PY  - 2013
UR  - http://dais.sanu.ac.rs/123456789/421
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7431
AB  - Porous aluminium-silicate ceramics, modified by alloying with magnesium and microalloying with alluminium belongs to a group of advanced multifunctional ceramics materials. This multiphase solid-solid system has predominantly amorphous microstructure and micro morphology. Intergranular and interphase areas are very complex, because they represent areas, where numbered processes and interactions take place, making new boundaries and regions with fractal nature. Solid contact between grains is actually very complex configuration of microcontacts with fractal nature. Fractal analysis of intergranular microstructure has included application of Minkowski layer. This layer is in correlation with fractal dimension, and defines grains contact probability. It represents convex layer of grains contour roughness and irregularity. Considering the fractal nature of intergranular contacts, it is possible to establish correlation between material electrical properties and fractal analysis, as a tool for future correlation with microstructure characterization.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : 2nd Serbian Ceramic Society Conference : program and the book of abstracts; September 30 - October 1, 2013; Belgrade
T1  - Application of Minkowski layer for microalloyed alumo-silicate ceramics grains fractal analysis
SP  - 43
EP  - 43
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7431
ER  - 

@conference{
author = "Purenović, Jelena M. and Mitić, Vojislav V. and Kocić, Ljubiša and Ranđelović, Marjan S. and Matović, Branko and Purenović, Milovan M.",
year = "2013",
abstract = "Porous aluminium-silicate ceramics, modified by alloying with magnesium and microalloying with alluminium belongs to a group of advanced multifunctional ceramics materials. This multiphase solid-solid system has predominantly amorphous microstructure and micro morphology. Intergranular and interphase areas are very complex, because they represent areas, where numbered processes and interactions take place, making new boundaries and regions with fractal nature. Solid contact between grains is actually very complex configuration of microcontacts with fractal nature. Fractal analysis of intergranular microstructure has included application of Minkowski layer. This layer is in correlation with fractal dimension, and defines grains contact probability. It represents convex layer of grains contour roughness and irregularity. Considering the fractal nature of intergranular contacts, it is possible to establish correlation between material electrical properties and fractal analysis, as a tool for future correlation with microstructure characterization.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : 2nd Serbian Ceramic Society Conference : program and the book of abstracts; September 30 - October 1, 2013; Belgrade",
title = "Application of Minkowski layer for microalloyed alumo-silicate ceramics grains fractal analysis",
pages = "43-43",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7431"
}

Purenović, J. M., Mitić, V. V., Kocić, L., Ranđelović, M. S., Matović, B.,& Purenović, M. M.. (2013). Application of Minkowski layer for microalloyed alumo-silicate ceramics grains fractal analysis. in Advanced Ceramics and Application : 2nd Serbian Ceramic Society Conference : program and the book of abstracts; September 30 - October 1, 2013; Belgrade
Belgrade : Serbian Ceramic Society., 43-43.
https://hdl.handle.net/21.15107/rcub_vinar_7431

Purenović JM, Mitić VV, Kocić L, Ranđelović MS, Matović B, Purenović MM. Application of Minkowski layer for microalloyed alumo-silicate ceramics grains fractal analysis. in Advanced Ceramics and Application : 2nd Serbian Ceramic Society Conference : program and the book of abstracts; September 30 - October 1, 2013; Belgrade. 2013;:43-43.
https://hdl.handle.net/21.15107/rcub_vinar_7431 .

Purenović, Jelena M., Mitić, Vojislav V., Kocić, Ljubiša, Ranđelović, Marjan S., Matović, Branko, Purenović, Milovan M., "Application of Minkowski layer for microalloyed alumo-silicate ceramics grains fractal analysis" in Advanced Ceramics and Application : 2nd Serbian Ceramic Society Conference : program and the book of abstracts; September 30 - October 1, 2013; Belgrade (2013):43-43,
https://hdl.handle.net/21.15107/rcub_vinar_7431 .

TY  - JOUR
AU  - Ranđelović, Marjan S.
AU  - Purenović, Milovan M.
AU  - Zarubica, Aleksandra R.
AU  - Purenović, Jelena M.
AU  - Matović, Branko
AU  - Momčilović, Milan Z.
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4676
AB  - The procedure for obtaining a bentonite based composite involves the application of mixed Fe and Mg hydroxides coatings onto bentonite particles in aqueous suspension and subsequent thermal treatment of the solid phase at 498K. Structural and textural modifications of montmorillonite which occurred during the synthesis of composite were confirmed by XRD technique and N-2 adsorption at 77K. The composite structure was found to be less ordered, while its specific surface area was about two times higher than the specific surface area of the starting/native bentonite. The effectiveness of the composite in Pb(II) removal from aqueous solutions at different initial concentrations, pH and ionic strengths of the solutions was examined. The equilibrium adsorption data were analyzed using three widely applied isotherms: Langmuir, Freundlich and Dubinin-Radushkevich. The composite effectively removes both ionic and colloidal forms of Pb(II) from water and the maximum adsorption capacity obtained from the Langmuir equation was 95.88 mg/g. The main mechanisms of Pb(II) removal at low pH values were ion-exchange and outer-sphere surface complexation. (C) 2011 Elsevier B.V. All rights reserved.
T2  - Journal of Hazardous Materials
T1  - Synthesis of composite by application of mixed Fe, Mg (hydr)oxides coatings onto bentonite - A use for the removal of Pb(II) from water
VL  - 199
SP  - 367
EP  - 374
DO  - 10.1016/j.jhazmat.2011.11.025
ER  - 

@article{
author = "Ranđelović, Marjan S. and Purenović, Milovan M. and Zarubica, Aleksandra R. and Purenović, Jelena M. and Matović, Branko and Momčilović, Milan Z.",
year = "2012",
abstract = "The procedure for obtaining a bentonite based composite involves the application of mixed Fe and Mg hydroxides coatings onto bentonite particles in aqueous suspension and subsequent thermal treatment of the solid phase at 498K. Structural and textural modifications of montmorillonite which occurred during the synthesis of composite were confirmed by XRD technique and N-2 adsorption at 77K. The composite structure was found to be less ordered, while its specific surface area was about two times higher than the specific surface area of the starting/native bentonite. The effectiveness of the composite in Pb(II) removal from aqueous solutions at different initial concentrations, pH and ionic strengths of the solutions was examined. The equilibrium adsorption data were analyzed using three widely applied isotherms: Langmuir, Freundlich and Dubinin-Radushkevich. The composite effectively removes both ionic and colloidal forms of Pb(II) from water and the maximum adsorption capacity obtained from the Langmuir equation was 95.88 mg/g. The main mechanisms of Pb(II) removal at low pH values were ion-exchange and outer-sphere surface complexation. (C) 2011 Elsevier B.V. All rights reserved.",
journal = "Journal of Hazardous Materials",
title = "Synthesis of composite by application of mixed Fe, Mg (hydr)oxides coatings onto bentonite - A use for the removal of Pb(II) from water",
volume = "199",
pages = "367-374",
doi = "10.1016/j.jhazmat.2011.11.025"
}

Ranđelović, M. S., Purenović, M. M., Zarubica, A. R., Purenović, J. M., Matović, B.,& Momčilović, M. Z.. (2012). Synthesis of composite by application of mixed Fe, Mg (hydr)oxides coatings onto bentonite - A use for the removal of Pb(II) from water. in Journal of Hazardous Materials, 199, 367-374.
https://doi.org/10.1016/j.jhazmat.2011.11.025

Ranđelović MS, Purenović MM, Zarubica AR, Purenović JM, Matović B, Momčilović MZ. Synthesis of composite by application of mixed Fe, Mg (hydr)oxides coatings onto bentonite - A use for the removal of Pb(II) from water. in Journal of Hazardous Materials. 2012;199:367-374.
doi:10.1016/j.jhazmat.2011.11.025 .

Ranđelović, Marjan S., Purenović, Milovan M., Zarubica, Aleksandra R., Purenović, Jelena M., Matović, Branko, Momčilović, Milan Z., "Synthesis of composite by application of mixed Fe, Mg (hydr)oxides coatings onto bentonite - A use for the removal of Pb(II) from water" in Journal of Hazardous Materials, 199 (2012):367-374,
https://doi.org/10.1016/j.jhazmat.2011.11.025 . .

TY  - JOUR
AU  - Momčilović, Milan Z.
AU  - Onjia, Antonije E.
AU  - Purenović, Milovan M.
AU  - Zarubica, Aleksandra R.
AU  - Ranđelović, Marjan S.
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4937
AB  - Adsorption of a cationic phenothyazine dye, Methylene Blue onto activated carbon prepared from pinecones was investigated. The parameters contact time, dye concentration and pH were varied. The kinetic data were found to follow closely the pseudo-second-order kinetic model. The equilibrium data were best represented by the Langmuir isotherm with a maximum adsorption capacity of 233.1 mg g(-1). The adsorption was favored by using a higher solution pH. Textural analysis by nitrogen adsorption was used to determine the specific surface area and pore structure of the obtained carbon. Boehm titrations revealed that carboxylic groups were present in a high degree on the carbon surface. The results indicate that the presented method for activation of pinecones could yield activated carbon with significant porosity, a developed surface reactivity and a considerable adsorption affinity toward the cationic dye Methylene Blue.
T2  - Journal of the Serbian Chemical Society
T1  - Removal of a cationic dye from water by activated pinecones
VL  - 77
IS  - 6
SP  - 761
EP  - 774
DO  - 10.2298/JSC110517162M
ER  - 

@article{
author = "Momčilović, Milan Z. and Onjia, Antonije E. and Purenović, Milovan M. and Zarubica, Aleksandra R. and Ranđelović, Marjan S.",
year = "2012",
abstract = "Adsorption of a cationic phenothyazine dye, Methylene Blue onto activated carbon prepared from pinecones was investigated. The parameters contact time, dye concentration and pH were varied. The kinetic data were found to follow closely the pseudo-second-order kinetic model. The equilibrium data were best represented by the Langmuir isotherm with a maximum adsorption capacity of 233.1 mg g(-1). The adsorption was favored by using a higher solution pH. Textural analysis by nitrogen adsorption was used to determine the specific surface area and pore structure of the obtained carbon. Boehm titrations revealed that carboxylic groups were present in a high degree on the carbon surface. The results indicate that the presented method for activation of pinecones could yield activated carbon with significant porosity, a developed surface reactivity and a considerable adsorption affinity toward the cationic dye Methylene Blue.",
journal = "Journal of the Serbian Chemical Society",
title = "Removal of a cationic dye from water by activated pinecones",
volume = "77",
number = "6",
pages = "761-774",
doi = "10.2298/JSC110517162M"
}

Momčilović, M. Z., Onjia, A. E., Purenović, M. M., Zarubica, A. R.,& Ranđelović, M. S.. (2012). Removal of a cationic dye from water by activated pinecones. in Journal of the Serbian Chemical Society, 77(6), 761-774.
https://doi.org/10.2298/JSC110517162M

Momčilović MZ, Onjia AE, Purenović MM, Zarubica AR, Ranđelović MS. Removal of a cationic dye from water by activated pinecones. in Journal of the Serbian Chemical Society. 2012;77(6):761-774.
doi:10.2298/JSC110517162M .

Momčilović, Milan Z., Onjia, Antonije E., Purenović, Milovan M., Zarubica, Aleksandra R., Ranđelović, Marjan S., "Removal of a cationic dye from water by activated pinecones" in Journal of the Serbian Chemical Society, 77, no. 6 (2012):761-774,
https://doi.org/10.2298/JSC110517162M . .

TY  - JOUR
AU  - Đorđević, Jelena S.
AU  - Papp, Zsigmond
AU  - Guzsvany, Valeria
AU  - Svancara, Ivan
AU  - Trtić-Petrović, Tatjana M.
AU  - Purenović, Milovan M.
AU  - Vytras, Karel
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4660
AB  - This paper summarises the results of voltammetric studies on the herbicide 3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea (Linuron), using a carbon paste electrode containing tricresyl phosphate (TCP-CPE) as liquid binder. The principal experimental conditions, such as the pH effect, investigated in Britton-Robinson buffer solutions (pH 2.0-7.0), the peak characteristics for the analyte of interest, or instrumental parameters for the differential pulse voltammetric mode were optimized for the method. As found out, the best electroanalytical performance of the TCP-CPE was achieved at pH 2.0, whereby the oxidation peak of Linuron appeared at ca. + 1.3 V vs. SCE. The analytical procedure developed offers good linearity in the concentration range of 1.25-44.20 mu g mL(-1) (1.77 x 10(-4)-5.05 x 10(-6) mol L-1), showing-for the first time-the applicability of the TCP-CPE for anodic oxidations in direct voltammetry (without accumulation). The method was then verified by determining Linuron in a spiked river water sample and a commercial formulation and the results obtained agreed well with those obtained by the reference HPLC/UV determination.
T2  - Sensors
T1  - Voltammetric Determination of the Herbicide Linuron Using a Tricresyl Phosphate-Based Carbon Paste Electrode
VL  - 12
IS  - 1
SP  - 148
EP  - 161
DO  - 10.3390/s120100148
ER  - 

@article{
author = "Đorđević, Jelena S. and Papp, Zsigmond and Guzsvany, Valeria and Svancara, Ivan and Trtić-Petrović, Tatjana M. and Purenović, Milovan M. and Vytras, Karel",
year = "2012",
abstract = "This paper summarises the results of voltammetric studies on the herbicide 3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea (Linuron), using a carbon paste electrode containing tricresyl phosphate (TCP-CPE) as liquid binder. The principal experimental conditions, such as the pH effect, investigated in Britton-Robinson buffer solutions (pH 2.0-7.0), the peak characteristics for the analyte of interest, or instrumental parameters for the differential pulse voltammetric mode were optimized for the method. As found out, the best electroanalytical performance of the TCP-CPE was achieved at pH 2.0, whereby the oxidation peak of Linuron appeared at ca. + 1.3 V vs. SCE. The analytical procedure developed offers good linearity in the concentration range of 1.25-44.20 mu g mL(-1) (1.77 x 10(-4)-5.05 x 10(-6) mol L-1), showing-for the first time-the applicability of the TCP-CPE for anodic oxidations in direct voltammetry (without accumulation). The method was then verified by determining Linuron in a spiked river water sample and a commercial formulation and the results obtained agreed well with those obtained by the reference HPLC/UV determination.",
journal = "Sensors",
title = "Voltammetric Determination of the Herbicide Linuron Using a Tricresyl Phosphate-Based Carbon Paste Electrode",
volume = "12",
number = "1",
pages = "148-161",
doi = "10.3390/s120100148"
}

Đorđević, J. S., Papp, Z., Guzsvany, V., Svancara, I., Trtić-Petrović, T. M., Purenović, M. M.,& Vytras, K.. (2012). Voltammetric Determination of the Herbicide Linuron Using a Tricresyl Phosphate-Based Carbon Paste Electrode. in Sensors, 12(1), 148-161.
https://doi.org/10.3390/s120100148

Đorđević JS, Papp Z, Guzsvany V, Svancara I, Trtić-Petrović TM, Purenović MM, Vytras K. Voltammetric Determination of the Herbicide Linuron Using a Tricresyl Phosphate-Based Carbon Paste Electrode. in Sensors. 2012;12(1):148-161.
doi:10.3390/s120100148 .

Đorđević, Jelena S., Papp, Zsigmond, Guzsvany, Valeria, Svancara, Ivan, Trtić-Petrović, Tatjana M., Purenović, Milovan M., Vytras, Karel, "Voltammetric Determination of the Herbicide Linuron Using a Tricresyl Phosphate-Based Carbon Paste Electrode" in Sensors, 12, no. 1 (2012):148-161,
https://doi.org/10.3390/s120100148 . .

TY  - JOUR
AU  - Ashrafi, Amir M.
AU  - Đorđević, Jelena S.
AU  - Guzsvany, Valeria
AU  - Svancara, Ivan
AU  - Trtić-Petrović, Tatjana M.
AU  - Purenović, Milovan M.
AU  - Vytras, Karel
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5235
AB  - In this study, a carbon paste electrode based on tricresyl phosphate (TCP-CPE) as a binder has been applied to the voltammetric characterization and determination of Carbendazim fungicide (methyl-1H-benzimidazol-2-yl-carbamate, MBC). The pH effect (in Britton-Robinson buffers, pH 2.0-8.0), as well as the presence of 2-hydroxypropyl-beta-cyclodextrin (HPCD) on the electrochemical behavior of MBC were investigated. In the potential range of interest, the oxidation signal was observed with the overall shape strongly dependent upon pH and exhibiting the most favorable signal-to-noise ratio in mild acidic solutions (pH 4.0). This has indicated that also protons are involved in the electrode transformation of MBC. Furthermore, it was confirmed that addition of 3.6.10(-5) mol L-1 HPCD significantly enhanced the sensitivity towards the target analyte. The experimental conditions optimised for the determination of MBC in the differential pulse adsorptive stripping voltammetric mode (DPAdSV) were as follows: initial potential, -0.10 V vs. Ag/AgCl; final potential, +1.30 V; accumulation potential, -0.35 V; accumulation time, 120 s, and the scan rate, 100 mV s(-1). The method developed offers linearity in the concentration range of 5.0 .10(-7) - 1.0.10(-5) mol L-1 MBC, with r = 0.995 and the limit of detection of about 3.0.10(-7) mol L-1. In a model sample of spiked river water, the recovery rate achieved was 101.9 % (at the concentrations from 1.0.10(-6) to 3.0.10(-6) mol L-1 MBC), suggesting one that the procedure can be applied in analysis of real samples.
T2  - International Journal of Electrochemical Science
T1  - Trace Determination of Carbendazim Fungicide Using Adsorptive Stripping Voltammetry with a Carbon Paste Electrode Containing Tricresyl Phosphate
VL  - 7
IS  - 10
SP  - 9717
EP  - 9731
UR  - https://hdl.handle.net/21.15107/rcub_vinar_5235
ER  - 

@article{
author = "Ashrafi, Amir M. and Đorđević, Jelena S. and Guzsvany, Valeria and Svancara, Ivan and Trtić-Petrović, Tatjana M. and Purenović, Milovan M. and Vytras, Karel",
year = "2012",
abstract = "In this study, a carbon paste electrode based on tricresyl phosphate (TCP-CPE) as a binder has been applied to the voltammetric characterization and determination of Carbendazim fungicide (methyl-1H-benzimidazol-2-yl-carbamate, MBC). The pH effect (in Britton-Robinson buffers, pH 2.0-8.0), as well as the presence of 2-hydroxypropyl-beta-cyclodextrin (HPCD) on the electrochemical behavior of MBC were investigated. In the potential range of interest, the oxidation signal was observed with the overall shape strongly dependent upon pH and exhibiting the most favorable signal-to-noise ratio in mild acidic solutions (pH 4.0). This has indicated that also protons are involved in the electrode transformation of MBC. Furthermore, it was confirmed that addition of 3.6.10(-5) mol L-1 HPCD significantly enhanced the sensitivity towards the target analyte. The experimental conditions optimised for the determination of MBC in the differential pulse adsorptive stripping voltammetric mode (DPAdSV) were as follows: initial potential, -0.10 V vs. Ag/AgCl; final potential, +1.30 V; accumulation potential, -0.35 V; accumulation time, 120 s, and the scan rate, 100 mV s(-1). The method developed offers linearity in the concentration range of 5.0 .10(-7) - 1.0.10(-5) mol L-1 MBC, with r = 0.995 and the limit of detection of about 3.0.10(-7) mol L-1. In a model sample of spiked river water, the recovery rate achieved was 101.9 % (at the concentrations from 1.0.10(-6) to 3.0.10(-6) mol L-1 MBC), suggesting one that the procedure can be applied in analysis of real samples.",
journal = "International Journal of Electrochemical Science",
title = "Trace Determination of Carbendazim Fungicide Using Adsorptive Stripping Voltammetry with a Carbon Paste Electrode Containing Tricresyl Phosphate",
volume = "7",
number = "10",
pages = "9717-9731",
url = "https://hdl.handle.net/21.15107/rcub_vinar_5235"
}

Ashrafi, A. M., Đorđević, J. S., Guzsvany, V., Svancara, I., Trtić-Petrović, T. M., Purenović, M. M.,& Vytras, K.. (2012). Trace Determination of Carbendazim Fungicide Using Adsorptive Stripping Voltammetry with a Carbon Paste Electrode Containing Tricresyl Phosphate. in International Journal of Electrochemical Science, 7(10), 9717-9731.
https://hdl.handle.net/21.15107/rcub_vinar_5235

Ashrafi AM, Đorđević JS, Guzsvany V, Svancara I, Trtić-Petrović TM, Purenović MM, Vytras K. Trace Determination of Carbendazim Fungicide Using Adsorptive Stripping Voltammetry with a Carbon Paste Electrode Containing Tricresyl Phosphate. in International Journal of Electrochemical Science. 2012;7(10):9717-9731.
https://hdl.handle.net/21.15107/rcub_vinar_5235 .

Ashrafi, Amir M., Đorđević, Jelena S., Guzsvany, Valeria, Svancara, Ivan, Trtić-Petrović, Tatjana M., Purenović, Milovan M., Vytras, Karel, "Trace Determination of Carbendazim Fungicide Using Adsorptive Stripping Voltammetry with a Carbon Paste Electrode Containing Tricresyl Phosphate" in International Journal of Electrochemical Science, 7, no. 10 (2012):9717-9731,
https://hdl.handle.net/21.15107/rcub_vinar_5235 .

TY  - CONF
AU  - Đorđević, Jelena
AU  - Kalijadis, Ana
AU  - Kumrić, Ksenija
AU  - Jovanović, Zoran
AU  - Laušević, Zoran
AU  - Purenović, Milovan
AU  - Trtić-Petrović, Tatjana
PY  - 2010
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12784
AB  - This paper presents voltametric studies of the linuron insecticide (3-(3,4-dichlorophenyl)-1methoxy-1-methylureum) on a boron doped glassy carbon (GCB), glassy carbon (GC) prepared in our laboratory and commercial glassy carbon electrode. The method, operated in the differential pulse voltammetric mode, works in the concetracion range from 0.62 to 26.09       mg L-1. We determined a peak potential, Ep, (1.25V), linear range and LOD for linuron in the sulfuric acid as a supporting electrolyte (pH=0.7) for all applied electrodes. GCB shows the broadest linear range and sensitivity. This appears to be the first aplication of a boron doped glassy carbon electrode to the voltammetric determination of linuron insecticide.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - 9th Young Researchers' Conference 2010 - Materials Science and Engineering : Program and Book of Abstracts
T1  - Voltammetric determination of linuron insecticide in methanol using a boron doped, glassy carbon and commercial glassy carbon electrode
SP  - 37
EP  - 37
UR  - https://hdl.handle.net/21.15107/rcub_vinar_12784
ER  - 

@conference{
author = "Đorđević, Jelena and Kalijadis, Ana and Kumrić, Ksenija and Jovanović, Zoran and Laušević, Zoran and Purenović, Milovan and Trtić-Petrović, Tatjana",
year = "2010",
abstract = "This paper presents voltametric studies of the linuron insecticide (3-(3,4-dichlorophenyl)-1methoxy-1-methylureum) on a boron doped glassy carbon (GCB), glassy carbon (GC) prepared in our laboratory and commercial glassy carbon electrode. The method, operated in the differential pulse voltammetric mode, works in the concetracion range from 0.62 to 26.09       mg L-1. We determined a peak potential, Ep, (1.25V), linear range and LOD for linuron in the sulfuric acid as a supporting electrolyte (pH=0.7) for all applied electrodes. GCB shows the broadest linear range and sensitivity. This appears to be the first aplication of a boron doped glassy carbon electrode to the voltammetric determination of linuron insecticide.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "9th Young Researchers' Conference 2010 - Materials Science and Engineering : Program and Book of Abstracts",
title = "Voltammetric determination of linuron insecticide in methanol using a boron doped, glassy carbon and commercial glassy carbon electrode",
pages = "37-37",
url = "https://hdl.handle.net/21.15107/rcub_vinar_12784"
}

Đorđević, J., Kalijadis, A., Kumrić, K., Jovanović, Z., Laušević, Z., Purenović, M.,& Trtić-Petrović, T.. (2010). Voltammetric determination of linuron insecticide in methanol using a boron doped, glassy carbon and commercial glassy carbon electrode. in 9th Young Researchers' Conference 2010 - Materials Science and Engineering : Program and Book of Abstracts
Belgrade : Institute of Technical Sciences of SASA., 37-37.
https://hdl.handle.net/21.15107/rcub_vinar_12784

Đorđević J, Kalijadis A, Kumrić K, Jovanović Z, Laušević Z, Purenović M, Trtić-Petrović T. Voltammetric determination of linuron insecticide in methanol using a boron doped, glassy carbon and commercial glassy carbon electrode. in 9th Young Researchers' Conference 2010 - Materials Science and Engineering : Program and Book of Abstracts. 2010;:37-37.
https://hdl.handle.net/21.15107/rcub_vinar_12784 .

Đorđević, Jelena, Kalijadis, Ana, Kumrić, Ksenija, Jovanović, Zoran, Laušević, Zoran, Purenović, Milovan, Trtić-Petrović, Tatjana, "Voltammetric determination of linuron insecticide in methanol using a boron doped, glassy carbon and commercial glassy carbon electrode" in 9th Young Researchers' Conference 2010 - Materials Science and Engineering : Program and Book of Abstracts (2010):37-37,
https://hdl.handle.net/21.15107/rcub_vinar_12784 .

TY  - JOUR
AU  - Đorđević, Jelena S.
AU  - Trtić-Petrović, Tatjana M.
AU  - Kumrić, Ksenija
AU  - Purenović, Milovan M.
PY  - 2010
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4053
AB  - This paper analyzes the conditions for membrane extraction of pesticides using ACD/LABS 12 program. The program contains a large database of more than 2000 compounds and their ionized species, for determining the pKa, further analysis includes 600 new compounds confirmed by Hammetts equation, which gives more precise values for log D and solubility. The 16 pesticides of different classes (organophosphates, carbamates, carbamidas, neonicotinoids etc.) and polarities commonly used in Serbia were examined. The program is used to calculate log D, pKa and solubility at different pH values for the mixture of pesticides. Based on the calculated values, the conditions for the extraction of pesticides in water using two-phase liquid liquid membrane extraction were optimized.
T2  - Hemijska industrija
T1  - Application of ACD/LABS 12 Program for Determination of Conditions for Experimental Membrane Extraction of Pesticides
VL  - 64
IS  - 3
SP  - 221
EP  - 225
DO  - 10.2298/HEMIND091221024D
ER  - 

@article{
author = "Đorđević, Jelena S. and Trtić-Petrović, Tatjana M. and Kumrić, Ksenija and Purenović, Milovan M.",
year = "2010",
abstract = "This paper analyzes the conditions for membrane extraction of pesticides using ACD/LABS 12 program. The program contains a large database of more than 2000 compounds and their ionized species, for determining the pKa, further analysis includes 600 new compounds confirmed by Hammetts equation, which gives more precise values for log D and solubility. The 16 pesticides of different classes (organophosphates, carbamates, carbamidas, neonicotinoids etc.) and polarities commonly used in Serbia were examined. The program is used to calculate log D, pKa and solubility at different pH values for the mixture of pesticides. Based on the calculated values, the conditions for the extraction of pesticides in water using two-phase liquid liquid membrane extraction were optimized.",
journal = "Hemijska industrija",
title = "Application of ACD/LABS 12 Program for Determination of Conditions for Experimental Membrane Extraction of Pesticides",
volume = "64",
number = "3",
pages = "221-225",
doi = "10.2298/HEMIND091221024D"
}

Đorđević, J. S., Trtić-Petrović, T. M., Kumrić, K.,& Purenović, M. M.. (2010). Application of ACD/LABS 12 Program for Determination of Conditions for Experimental Membrane Extraction of Pesticides. in Hemijska industrija, 64(3), 221-225.
https://doi.org/10.2298/HEMIND091221024D

Đorđević JS, Trtić-Petrović TM, Kumrić K, Purenović MM. Application of ACD/LABS 12 Program for Determination of Conditions for Experimental Membrane Extraction of Pesticides. in Hemijska industrija. 2010;64(3):221-225.
doi:10.2298/HEMIND091221024D .

Đorđević, Jelena S., Trtić-Petrović, Tatjana M., Kumrić, Ksenija, Purenović, Milovan M., "Application of ACD/LABS 12 Program for Determination of Conditions for Experimental Membrane Extraction of Pesticides" in Hemijska industrija, 64, no. 3 (2010):221-225,
https://doi.org/10.2298/HEMIND091221024D . .

TY  - JOUR
AU  - Zlatanovic, D
AU  - Purenović, Milovan M.
AU  - Zec, Slavica
AU  - Miljkovic, M
PY  - 1998
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6257
AB  - This work presents the results obtained on the role of NaCl in chlorine roasting of MoS2. The process was performed in an oxygen atmosphere in the temperature range from 350 to 500 degrees C. The chlorine roasting of MoS2 in the mixture with NaCl was analysed and the products and change in the NaCl surface topography occurring during the processing were detected by x-ray diffractometry and Scanning Electron Microscopy (SEM), respectively. At a temperature below 400 degrees C chemical activity of NaCl resulted in a change of NaCl surface topography. However, only MoO3 was detected. At a temperature above 400 degrees C Na2Mo2O7, Na2SO4 and MoO3 were detected, as well as the melt around NaCl particles. Evaporation and condensation on cold wall of reaction tube of some compounds containing molybdenum and chlorine were also detected. Such phenomena will not occur if oxidation takes place without NaCl or MoS2/NaCl mixture is annealed in an inert atmosphere. This indicates that all detected phenomena were caused by NaCl reactions with products of oxidation of MoS2 and chlorine roasting of MoS2 occurred in the melt.
T2  - Materials Science Forum
T1  - The role of NaCl in chlorine roasting of MoS2
VL  - 282-2
SP  - 349
EP  - 354
DO  - 10.4028/www.scientific.net/MSF.282-283.349
ER  - 

@article{
author = "Zlatanovic, D and Purenović, Milovan M. and Zec, Slavica and Miljkovic, M",
year = "1998",
abstract = "This work presents the results obtained on the role of NaCl in chlorine roasting of MoS2. The process was performed in an oxygen atmosphere in the temperature range from 350 to 500 degrees C. The chlorine roasting of MoS2 in the mixture with NaCl was analysed and the products and change in the NaCl surface topography occurring during the processing were detected by x-ray diffractometry and Scanning Electron Microscopy (SEM), respectively. At a temperature below 400 degrees C chemical activity of NaCl resulted in a change of NaCl surface topography. However, only MoO3 was detected. At a temperature above 400 degrees C Na2Mo2O7, Na2SO4 and MoO3 were detected, as well as the melt around NaCl particles. Evaporation and condensation on cold wall of reaction tube of some compounds containing molybdenum and chlorine were also detected. Such phenomena will not occur if oxidation takes place without NaCl or MoS2/NaCl mixture is annealed in an inert atmosphere. This indicates that all detected phenomena were caused by NaCl reactions with products of oxidation of MoS2 and chlorine roasting of MoS2 occurred in the melt.",
journal = "Materials Science Forum",
title = "The role of NaCl in chlorine roasting of MoS2",
volume = "282-2",
pages = "349-354",
doi = "10.4028/www.scientific.net/MSF.282-283.349"
}

Zlatanovic, D., Purenović, M. M., Zec, S.,& Miljkovic, M.. (1998). The role of NaCl in chlorine roasting of MoS2. in Materials Science Forum, 282-2, 349-354.
https://doi.org/10.4028/www.scientific.net/MSF.282-283.349

Zlatanovic D, Purenović MM, Zec S, Miljkovic M. The role of NaCl in chlorine roasting of MoS2. in Materials Science Forum. 1998;282-2:349-354.
doi:10.4028/www.scientific.net/MSF.282-283.349 .

Zlatanovic, D, Purenović, Milovan M., Zec, Slavica, Miljkovic, M, "The role of NaCl in chlorine roasting of MoS2" in Materials Science Forum, 282-2 (1998):349-354,
https://doi.org/10.4028/www.scientific.net/MSF.282-283.349 . .