Pavlović, Vladimir B.

Link to this page

Authority KeyName Variants
orcid::0000-0002-1138-0331
  • Pavlović, Vladimir B. (124)
Projects
Directed synthesis, structure and properties of multifunctional materials Thin films of single wall carbon nanotubes and graphene for electronic application
Synthesis, processing and applications of nanostructured multifunctional materials with defined properties Synthesis, processing and characterization of nanostructured materials for application in the field of energy, mechanical engineering, environmental protection and biomedicine
Size-, shape- and structure- dependent properties of nanoparticles and nanocomposites Functional, Functionalized and Advanced Nanomaterials
Materials of Reduced Dimensions for Efficient Light Harvesting and Energy conversion Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200017 (University of Belgrade, Institute of Nuclear Sciences 'Vinča', Belgrade-Vinča)
SASPRO - Mobility Programme of Slovak Academy of Sciences: Supportive Fund for Excellent Scientists Synthesis and characterization of novel functional polymers and polymeric nanocomposites
Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing Novel encapsulation and enzyme technologies for designing of new biocatalysts and biologically active compounds targeting enhancement of food quality, safety and competitiveness
Investigation of the relation in triad: Synthesis structure-properties for functional materials Application of biotechnological methods for sustainable exploitation of by-products of agro-industry
NSF CREST [HRD-0833184] Bilateral cooperation between Serbia and France [4510339/2016/09/03 “Inteligent econanomaterials and nanocomposites”]
Investigation of intermetallics and semiconductors and possible application in renewable energy sources Investigation of the effect of parameters of synthesis and processing on dielectric, optical and magnetic properties, both bulk and surface of crystal and polymeric systems
Electroconducting and redox-active polymers and oligomers: synthesis, structure, properties and applications Studying signal transduction pathways and epigenetic mechanisms that control human SOX genes expression: further insight into their roles in cell fate determination and differentiation
Geologic and ecotoxicologic research in identification of geopathogen zones of toxic elements in drinking water reservoirs- research into methods and procedures for reduction of biochemical anomalies Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200026 (University of Belgrade, Institute of Chemistry, Technology and Metallurgy - IChTM)
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200116 (University of Belgrade, Faculty of Agriculture) Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200135 (University of Belgrade, Faculty of Technology and Metallurgy)
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200175 (Institute of Technical Sciences of SASA, Belgrade) Advanced technologies for monitoring and environmental protection from chemical pollutants and radiation burden
Nanostructured Functional and Composite Materials in Catalytic and Sorption Processes Molecular designing of nanoparticles with controlled morphological and physicochemical characteristics and functional materials based on them
Lithium-ion batteries and fuel cells - research and development Magnetic and radionuclide labeled nanostructured materials for medical applications

Author's Bibliography

Physico-chemical and mechanical properties of geopolymer/zircon composites

Kljajević, Ljiljana; Nenadović, Miloš; Petković, Marijana; Bučevac, Dušan; Pavlović, Vladimir; Mladenović-Nikolić, Nataša; Nenadović, Snežana

(2022)

TY  - JOUR
AU  - Kljajević, Ljiljana
AU  - Nenadović, Miloš
AU  - Petković, Marijana
AU  - Bučevac, Dušan
AU  - Pavlović, Vladimir
AU  - Mladenović-Nikolić, Nataša
AU  - Nenadović, Snežana
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10246
AB  - The effect of zircon (ZrSiO4) on the physico-chemical and mechanical properties of geopolymer/zircon composites was examined in this study. Four geopolymer/zircon composites containing 10, 20, 30 and 40 wt.% zircon were prepared from metakaolin with alkali activators. Characterization of the obtained geopolymers was performed by X-ray diffraction (XRD), Scanning electron microscope (SEM-EDS), Fourier transform infrared spectroscopy (FTIR) and Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF). XRD results did not confirmed the formation of interconnected phases between added zircon, starting aluminum silicates and alkali activators. Compressive strength of prepared geopolymer was examined. The maximum obtained compressive strength of 70.15 MPa was measured in sample containing the smallest fraction of zircon, i.e., 10 wt.%. Addition of larger amount of zircon (20 wt.%) hinders the progress of geopolymerization reaction and consequently decreases compressive strength.
T2  - Science of Sintering
T1  - Physico-chemical and mechanical properties of geopolymer/zircon composites
VL  - 54
IS  - 1
SP  - 11
EP  - 24
DO  - 10.2298/SOS2201011K
ER  - 
@article{
author = "Kljajević, Ljiljana and Nenadović, Miloš and Petković, Marijana and Bučevac, Dušan and Pavlović, Vladimir and Mladenović-Nikolić, Nataša and Nenadović, Snežana",
year = "2022",
abstract = "The effect of zircon (ZrSiO4) on the physico-chemical and mechanical properties of geopolymer/zircon composites was examined in this study. Four geopolymer/zircon composites containing 10, 20, 30 and 40 wt.% zircon were prepared from metakaolin with alkali activators. Characterization of the obtained geopolymers was performed by X-ray diffraction (XRD), Scanning electron microscope (SEM-EDS), Fourier transform infrared spectroscopy (FTIR) and Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF). XRD results did not confirmed the formation of interconnected phases between added zircon, starting aluminum silicates and alkali activators. Compressive strength of prepared geopolymer was examined. The maximum obtained compressive strength of 70.15 MPa was measured in sample containing the smallest fraction of zircon, i.e., 10 wt.%. Addition of larger amount of zircon (20 wt.%) hinders the progress of geopolymerization reaction and consequently decreases compressive strength.",
journal = "Science of Sintering",
title = "Physico-chemical and mechanical properties of geopolymer/zircon composites",
volume = "54",
number = "1",
pages = "11-24",
doi = "10.2298/SOS2201011K"
}
Kljajević, L., Nenadović, M., Petković, M., Bučevac, D., Pavlović, V., Mladenović-Nikolić, N.,& Nenadović, S.. (2022). Physico-chemical and mechanical properties of geopolymer/zircon composites. in Science of Sintering, 54(1), 11-24.
https://doi.org/10.2298/SOS2201011K
Kljajević L, Nenadović M, Petković M, Bučevac D, Pavlović V, Mladenović-Nikolić N, Nenadović S. Physico-chemical and mechanical properties of geopolymer/zircon composites. in Science of Sintering. 2022;54(1):11-24.
doi:10.2298/SOS2201011K .
Kljajević, Ljiljana, Nenadović, Miloš, Petković, Marijana, Bučevac, Dušan, Pavlović, Vladimir, Mladenović-Nikolić, Nataša, Nenadović, Snežana, "Physico-chemical and mechanical properties of geopolymer/zircon composites" in Science of Sintering, 54, no. 1 (2022):11-24,
https://doi.org/10.2298/SOS2201011K . .

Properties of free-standing graphene oxide/silver nanowires films and effects of chemical reduction and gamma irradiation

Mišović, Aleksandra; Bajuk-Bogdanović, Danica V.; Kepić, Dejan; Pavlović, Vladimir B.; Huskić, Miroslav; Hasheminejad, Navid; Vuye, Cedric; Zorić, Nemanja; Jovanović, Svetlana P.

(2022)

TY  - JOUR
AU  - Mišović, Aleksandra
AU  - Bajuk-Bogdanović, Danica V.
AU  - Kepić, Dejan
AU  - Pavlović, Vladimir B.
AU  - Huskić, Miroslav
AU  - Hasheminejad, Navid
AU  - Vuye, Cedric
AU  - Zorić, Nemanja
AU  - Jovanović, Svetlana P.
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10078
AB  - The need for stable, chemical resistant and conductive materials is on the rise in recent times. Graphene shows promising electrical conductivity and chemical stability, but the production of a continual, conductive layer is limited and expensive. Silver nanowires (AgNWs) are both conducive and economically viable, but they are sensitive to water and oxygen. In this study, graphene oxide (GO) and AgNWs were synthesized and combined in different mass ratios (3:1, 2.5:1.5, and 1:1) to obtain chemically stable composites with improved electrical properties. Composites were reduced using ascorbic acid. With the increase of AgNWs to GO mass ratio, the surface of the free-standing composite film improved: the root mean square roughness was lowered from 376 nm for GO to 168 nm for the composite with the mass ratio of GO:AgNWs 1:1, while the sheet resistance was lowered from 146 × 106 Ω/□ to 4 Ω/□. For the first time, the effects of gamma irradiation on the structure of the composites were studied. Doses of 15, 25, and 35 kGy were applied.
T2  - Synthetic Metals
T1  - Properties of free-standing graphene oxide/silver nanowires films and effects of chemical reduction and gamma irradiation
VL  - 283
SP  - 116980
DO  - 10.1016/j.synthmet.2021.116980
ER  - 
@article{
author = "Mišović, Aleksandra and Bajuk-Bogdanović, Danica V. and Kepić, Dejan and Pavlović, Vladimir B. and Huskić, Miroslav and Hasheminejad, Navid and Vuye, Cedric and Zorić, Nemanja and Jovanović, Svetlana P.",
year = "2022",
abstract = "The need for stable, chemical resistant and conductive materials is on the rise in recent times. Graphene shows promising electrical conductivity and chemical stability, but the production of a continual, conductive layer is limited and expensive. Silver nanowires (AgNWs) are both conducive and economically viable, but they are sensitive to water and oxygen. In this study, graphene oxide (GO) and AgNWs were synthesized and combined in different mass ratios (3:1, 2.5:1.5, and 1:1) to obtain chemically stable composites with improved electrical properties. Composites were reduced using ascorbic acid. With the increase of AgNWs to GO mass ratio, the surface of the free-standing composite film improved: the root mean square roughness was lowered from 376 nm for GO to 168 nm for the composite with the mass ratio of GO:AgNWs 1:1, while the sheet resistance was lowered from 146 × 106 Ω/□ to 4 Ω/□. For the first time, the effects of gamma irradiation on the structure of the composites were studied. Doses of 15, 25, and 35 kGy were applied.",
journal = "Synthetic Metals",
title = "Properties of free-standing graphene oxide/silver nanowires films and effects of chemical reduction and gamma irradiation",
volume = "283",
pages = "116980",
doi = "10.1016/j.synthmet.2021.116980"
}
Mišović, A., Bajuk-Bogdanović, D. V., Kepić, D., Pavlović, V. B., Huskić, M., Hasheminejad, N., Vuye, C., Zorić, N.,& Jovanović, S. P.. (2022). Properties of free-standing graphene oxide/silver nanowires films and effects of chemical reduction and gamma irradiation. in Synthetic Metals, 283, 116980.
https://doi.org/10.1016/j.synthmet.2021.116980
Mišović A, Bajuk-Bogdanović DV, Kepić D, Pavlović VB, Huskić M, Hasheminejad N, Vuye C, Zorić N, Jovanović SP. Properties of free-standing graphene oxide/silver nanowires films and effects of chemical reduction and gamma irradiation. in Synthetic Metals. 2022;283:116980.
doi:10.1016/j.synthmet.2021.116980 .
Mišović, Aleksandra, Bajuk-Bogdanović, Danica V., Kepić, Dejan, Pavlović, Vladimir B., Huskić, Miroslav, Hasheminejad, Navid, Vuye, Cedric, Zorić, Nemanja, Jovanović, Svetlana P., "Properties of free-standing graphene oxide/silver nanowires films and effects of chemical reduction and gamma irradiation" in Synthetic Metals, 283 (2022):116980,
https://doi.org/10.1016/j.synthmet.2021.116980 . .

Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions

Đukić, Dunja; Krstić, Aleksandar; Jakovljević, Ksenija; Butulija, Svetlana; Anđelković, Ljubica; Pavlović, Vladimir B.; Mirković, Miljana M.

(2022)

TY  - JOUR
AU  - Đukić, Dunja
AU  - Krstić, Aleksandar
AU  - Jakovljević, Ksenija
AU  - Butulija, Svetlana
AU  - Anđelković, Ljubica
AU  - Pavlović, Vladimir B.
AU  - Mirković, Miljana M.
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10233
AB  - Newly designed mesoporous brushite-metakaolin-based geopolymer materials were examined with an idea for using this material as a potential adsorbent for Pb(II) removal from aqueous solutions. As a starting component for geopolymer synthesis, a natural raw kaolinite clay with theaddition of 2 wt.%, 4 wt.%, 6 wt.%, 8 wt.%, and 10 wt.% of pure brushite was used. Phase, structural,morphological, and adsorption properties of newly synthesized mesoporous brushite-metakaolin geopolymer materials were examined in detail by the means of XRPD, FTIR, SEM-EDS, BET/BJH, and ICP-OES methods. The ICP-OES results showed that the synthesized material samples with 2 wt.%, 4 wt.%, and 6 wt.% of brushite possess significant adsorption properties and the mechanisms of the adsorption process can be attributed to chemisorption. The most notable result is that brushite-metakaolin-geopolymer with 2 wt.% of brushite have the best efficiency removal, more than 85% of Pb(II).
T2  - Sustainability
T1  - Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions
VL  - 14
IS  - 7
SP  - 4003
DO  - 10.3390/su14074003
ER  - 
@article{
author = "Đukić, Dunja and Krstić, Aleksandar and Jakovljević, Ksenija and Butulija, Svetlana and Anđelković, Ljubica and Pavlović, Vladimir B. and Mirković, Miljana M.",
year = "2022",
abstract = "Newly designed mesoporous brushite-metakaolin-based geopolymer materials were examined with an idea for using this material as a potential adsorbent for Pb(II) removal from aqueous solutions. As a starting component for geopolymer synthesis, a natural raw kaolinite clay with theaddition of 2 wt.%, 4 wt.%, 6 wt.%, 8 wt.%, and 10 wt.% of pure brushite was used. Phase, structural,morphological, and adsorption properties of newly synthesized mesoporous brushite-metakaolin geopolymer materials were examined in detail by the means of XRPD, FTIR, SEM-EDS, BET/BJH, and ICP-OES methods. The ICP-OES results showed that the synthesized material samples with 2 wt.%, 4 wt.%, and 6 wt.% of brushite possess significant adsorption properties and the mechanisms of the adsorption process can be attributed to chemisorption. The most notable result is that brushite-metakaolin-geopolymer with 2 wt.% of brushite have the best efficiency removal, more than 85% of Pb(II).",
journal = "Sustainability",
title = "Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions",
volume = "14",
number = "7",
pages = "4003",
doi = "10.3390/su14074003"
}
Đukić, D., Krstić, A., Jakovljević, K., Butulija, S., Anđelković, L., Pavlović, V. B.,& Mirković, M. M.. (2022). Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions. in Sustainability, 14(7), 4003.
https://doi.org/10.3390/su14074003
Đukić D, Krstić A, Jakovljević K, Butulija S, Anđelković L, Pavlović VB, Mirković MM. Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions. in Sustainability. 2022;14(7):4003.
doi:10.3390/su14074003 .
Đukić, Dunja, Krstić, Aleksandar, Jakovljević, Ksenija, Butulija, Svetlana, Anđelković, Ljubica, Pavlović, Vladimir B., Mirković, Miljana M., "Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions" in Sustainability, 14, no. 7 (2022):4003,
https://doi.org/10.3390/su14074003 . .

Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent

Zmejkoski, Danica; Marković, Zoran M.; Zdravković, Nemanja M.; Trišić, Dijana; Budimir, Milica; Kuzman, Sanja; Kozyrovska, Natalia O.; Orlovska, Iryna V.; Bugárová, Nikol; Petrović, Đorđe; Kováčová, Mária; Kleinová, Angela; Špitalský, Zdeno; Pavlović, Vladimir B.; Todorović-Marković, Biljana

(2021)

TY  - JOUR
AU  - Zmejkoski, Danica
AU  - Marković, Zoran M.
AU  - Zdravković, Nemanja M.
AU  - Trišić, Dijana
AU  - Budimir, Milica
AU  - Kuzman, Sanja
AU  - Kozyrovska, Natalia O.
AU  - Orlovska, Iryna V.
AU  - Bugárová, Nikol
AU  - Petrović, Đorđe
AU  - Kováčová, Mária
AU  - Kleinová, Angela
AU  - Špitalský, Zdeno
AU  - Pavlović, Vladimir B.
AU  - Todorović-Marković, Biljana
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9143
AB  - Therapy of bacterial urinary tract infections (UTIs) and catheter associated urinary tract infections (CAUTIs) is still a great challenge because of the resistance of bacteria to nowadays used antibiotics and encrustation of catheters. Bacterial cellulose (BC) as a biocompatible material with a high porosity allows incorporation of different materials in its three dimensional network structure. In this work a low molecular weight chitosan (Chi) polymer is incorporated in BC with different concentrations. Different characterization techniques are used to investigate structural and optical properties of these composites. Radical scavenging activity test shows moderate antioxidant activity of these biocompatible composites whereasin vitrorelease test shows that 13.3% of chitosan is released after 72 h. Antibacterial testing of BC-Chi composites conducted on Gram-positive and Gram-negative bacteria causing UTIs and CAUTIs (Escherichia coli,Pseudomonas aeruginosa,Klebsiella pneumoniae) and encrustation (Proteus mirabilis) show bactericidal effect. The morphology analysis of bacteria after the application of BC-Chi shows that they are flattened with a rough surface, with a tendency to agglomerate and with decreased length and width. All obtained results show that BC-Chi composites might be considered as potential biomedical agents in treatment of UTIs and CAUTIs and as a urinary catheter coating in encrustation prevention.
T2  - RSC Advances
T1  - Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent
VL  - 11
IS  - 15
SP  - 8559
EP  - 8568
DO  - 10.1039/D0RA10782D
ER  - 
@article{
author = "Zmejkoski, Danica and Marković, Zoran M. and Zdravković, Nemanja M. and Trišić, Dijana and Budimir, Milica and Kuzman, Sanja and Kozyrovska, Natalia O. and Orlovska, Iryna V. and Bugárová, Nikol and Petrović, Đorđe and Kováčová, Mária and Kleinová, Angela and Špitalský, Zdeno and Pavlović, Vladimir B. and Todorović-Marković, Biljana",
year = "2021",
abstract = "Therapy of bacterial urinary tract infections (UTIs) and catheter associated urinary tract infections (CAUTIs) is still a great challenge because of the resistance of bacteria to nowadays used antibiotics and encrustation of catheters. Bacterial cellulose (BC) as a biocompatible material with a high porosity allows incorporation of different materials in its three dimensional network structure. In this work a low molecular weight chitosan (Chi) polymer is incorporated in BC with different concentrations. Different characterization techniques are used to investigate structural and optical properties of these composites. Radical scavenging activity test shows moderate antioxidant activity of these biocompatible composites whereasin vitrorelease test shows that 13.3% of chitosan is released after 72 h. Antibacterial testing of BC-Chi composites conducted on Gram-positive and Gram-negative bacteria causing UTIs and CAUTIs (Escherichia coli,Pseudomonas aeruginosa,Klebsiella pneumoniae) and encrustation (Proteus mirabilis) show bactericidal effect. The morphology analysis of bacteria after the application of BC-Chi shows that they are flattened with a rough surface, with a tendency to agglomerate and with decreased length and width. All obtained results show that BC-Chi composites might be considered as potential biomedical agents in treatment of UTIs and CAUTIs and as a urinary catheter coating in encrustation prevention.",
journal = "RSC Advances",
title = "Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent",
volume = "11",
number = "15",
pages = "8559-8568",
doi = "10.1039/D0RA10782D"
}
Zmejkoski, D., Marković, Z. M., Zdravković, N. M., Trišić, D., Budimir, M., Kuzman, S., Kozyrovska, N. O., Orlovska, I. V., Bugárová, N., Petrović, Đ., Kováčová, M., Kleinová, A., Špitalský, Z., Pavlović, V. B.,& Todorović-Marković, B.. (2021). Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent. in RSC Advances, 11(15), 8559-8568.
https://doi.org/10.1039/D0RA10782D
Zmejkoski D, Marković ZM, Zdravković NM, Trišić D, Budimir M, Kuzman S, Kozyrovska NO, Orlovska IV, Bugárová N, Petrović Đ, Kováčová M, Kleinová A, Špitalský Z, Pavlović VB, Todorović-Marković B. Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent. in RSC Advances. 2021;11(15):8559-8568.
doi:10.1039/D0RA10782D .
Zmejkoski, Danica, Marković, Zoran M., Zdravković, Nemanja M., Trišić, Dijana, Budimir, Milica, Kuzman, Sanja, Kozyrovska, Natalia O., Orlovska, Iryna V., Bugárová, Nikol, Petrović, Đorđe, Kováčová, Mária, Kleinová, Angela, Špitalský, Zdeno, Pavlović, Vladimir B., Todorović-Marković, Biljana, "Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent" in RSC Advances, 11, no. 15 (2021):8559-8568,
https://doi.org/10.1039/D0RA10782D . .
2
2
2

Multiferroic heterostructure BaTiO3/ε-Fe2O3 composite obtained by in situ reaction

Filipović, Suzana; Obradović, Nina; Anđelković, Ljubica; Olćan, Dragan; Petrović, Jovana; Mirković, Miljana M.; Pavlović, Vladimir B.; Jeremić, Dejan; Vlahović, Branislav; Đorđević, Antonije

(2021)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Anđelković, Ljubica
AU  - Olćan, Dragan
AU  - Petrović, Jovana
AU  - Mirković, Miljana M.
AU  - Pavlović, Vladimir B.
AU  - Jeremić, Dejan
AU  - Vlahović, Branislav
AU  - Đorđević, Antonije
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9410
AB  - Solid-state reaction between BaTiO3and Fe2O3was used to produce a multiferroic heterostructure composite. Commercial BaTiO3and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300°C for 6 h. Sintering at 1300 °C for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3with Fe2O3resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature. © 2021 Authors. Published by association for ETRAN Society.
T2  - Science of Sintering
T1  - Multiferroic heterostructure BaTiO3/ε-Fe2O3 composite obtained by in situ reaction
VL  - 53
IS  - 1
SP  - 1
EP  - 8
DO  - 10.2298/SOS2101001F
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Anđelković, Ljubica and Olćan, Dragan and Petrović, Jovana and Mirković, Miljana M. and Pavlović, Vladimir B. and Jeremić, Dejan and Vlahović, Branislav and Đorđević, Antonije",
year = "2021",
abstract = "Solid-state reaction between BaTiO3and Fe2O3was used to produce a multiferroic heterostructure composite. Commercial BaTiO3and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300°C for 6 h. Sintering at 1300 °C for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3with Fe2O3resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature. © 2021 Authors. Published by association for ETRAN Society.",
journal = "Science of Sintering",
title = "Multiferroic heterostructure BaTiO3/ε-Fe2O3 composite obtained by in situ reaction",
volume = "53",
number = "1",
pages = "1-8",
doi = "10.2298/SOS2101001F"
}
Filipović, S., Obradović, N., Anđelković, L., Olćan, D., Petrović, J., Mirković, M. M., Pavlović, V. B., Jeremić, D., Vlahović, B.,& Đorđević, A.. (2021). Multiferroic heterostructure BaTiO3/ε-Fe2O3 composite obtained by in situ reaction. in Science of Sintering, 53(1), 1-8.
https://doi.org/10.2298/SOS2101001F
Filipović S, Obradović N, Anđelković L, Olćan D, Petrović J, Mirković MM, Pavlović VB, Jeremić D, Vlahović B, Đorđević A. Multiferroic heterostructure BaTiO3/ε-Fe2O3 composite obtained by in situ reaction. in Science of Sintering. 2021;53(1):1-8.
doi:10.2298/SOS2101001F .
Filipović, Suzana, Obradović, Nina, Anđelković, Ljubica, Olćan, Dragan, Petrović, Jovana, Mirković, Miljana M., Pavlović, Vladimir B., Jeremić, Dejan, Vlahović, Branislav, Đorđević, Antonije, "Multiferroic heterostructure BaTiO3/ε-Fe2O3 composite obtained by in situ reaction" in Science of Sintering, 53, no. 1 (2021):1-8,
https://doi.org/10.2298/SOS2101001F . .
1
1

High-performance laminate material based on polyurethane and epoxide reinforced by silica particles from rice husk used for intelligent pedestrian crossings

Tomić, Nataša Z.; Marinković, Aleksandar D.; Balanč, Bojana; Obradović, Vera; Pavlović, Vladimir B.; Manojlović, Vaso; Vuksanović, Marija M.

(2021)

TY  - JOUR
AU  - Tomić, Nataša Z.
AU  - Marinković, Aleksandar D.
AU  - Balanč, Bojana
AU  - Obradović, Vera
AU  - Pavlović, Vladimir B.
AU  - Manojlović, Vaso
AU  - Vuksanović, Marija M.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9517
AB  - Intelligent pedestrian crossings were made with the aim to increase pedestrian safety at poorly lit locations. New technologies include the design of polymer materials that have high performance by optimizing properties such as compression, tensile and impact strengths, wear resistance, hardness and transparency. The desired properties are set up to face the demands of a heavy daily traffic load and enable the functionality. Laminate material consists of the epoxy composite reinforced with silica (SiO2) derived from rice husk waste and a protective thermoplastic polyurethane layer. The top layer of the laminate material is a transparent thermoplastic polyurethane (TPU) serving as a protective layer with high wear resistance and good adhesion with epoxy composite. Silica obtained from rice husk waste was used in reinforcing of the epoxide in order to improve the mechanical properties, diffuse the light, improve the adhesion with TPU and decrease the production costs. Micro-Vickers hardness of the epoxy composite was increased by 70% with the addition of 15 wt% of SiO2. Impact energy of the epoxy composite with 15 wt% of SiO2 was increased by 272.9% after adding the TPU layer. Compressive strength of the epoxy resin is improved by 16.2% by reinforcement with 15 wt% of SiO2, while the laminate composite material showed 207% higher compressive strength than the commonly used asphalt pavement. Moreover, the addition of 15 wt% of SiO2 improved the adhesion between epoxy composite and TPU layer (11.2%). Thus, obtained laminated material made of the epoxy composite with 15 wt% of SiO2 (obtained from rice husk waste) and TPU598 showed mechanical properties and LED light transmission/diffusion appropriate for application in the intelligent pedestrian crossings. © 2021, Iran Polymer and Petrochemical Institute.
T2  - Iranian Polymer Journal (English Edition)
T1  - High-performance laminate material based on polyurethane and epoxide reinforced by silica particles from rice husk used for intelligent pedestrian crossings
VL  - 30
IS  - 3
SP  - 319
EP  - 330
DO  - 10.1007/s13726-020-00894-6
ER  - 
@article{
author = "Tomić, Nataša Z. and Marinković, Aleksandar D. and Balanč, Bojana and Obradović, Vera and Pavlović, Vladimir B. and Manojlović, Vaso and Vuksanović, Marija M.",
year = "2021",
abstract = "Intelligent pedestrian crossings were made with the aim to increase pedestrian safety at poorly lit locations. New technologies include the design of polymer materials that have high performance by optimizing properties such as compression, tensile and impact strengths, wear resistance, hardness and transparency. The desired properties are set up to face the demands of a heavy daily traffic load and enable the functionality. Laminate material consists of the epoxy composite reinforced with silica (SiO2) derived from rice husk waste and a protective thermoplastic polyurethane layer. The top layer of the laminate material is a transparent thermoplastic polyurethane (TPU) serving as a protective layer with high wear resistance and good adhesion with epoxy composite. Silica obtained from rice husk waste was used in reinforcing of the epoxide in order to improve the mechanical properties, diffuse the light, improve the adhesion with TPU and decrease the production costs. Micro-Vickers hardness of the epoxy composite was increased by 70% with the addition of 15 wt% of SiO2. Impact energy of the epoxy composite with 15 wt% of SiO2 was increased by 272.9% after adding the TPU layer. Compressive strength of the epoxy resin is improved by 16.2% by reinforcement with 15 wt% of SiO2, while the laminate composite material showed 207% higher compressive strength than the commonly used asphalt pavement. Moreover, the addition of 15 wt% of SiO2 improved the adhesion between epoxy composite and TPU layer (11.2%). Thus, obtained laminated material made of the epoxy composite with 15 wt% of SiO2 (obtained from rice husk waste) and TPU598 showed mechanical properties and LED light transmission/diffusion appropriate for application in the intelligent pedestrian crossings. © 2021, Iran Polymer and Petrochemical Institute.",
journal = "Iranian Polymer Journal (English Edition)",
title = "High-performance laminate material based on polyurethane and epoxide reinforced by silica particles from rice husk used for intelligent pedestrian crossings",
volume = "30",
number = "3",
pages = "319-330",
doi = "10.1007/s13726-020-00894-6"
}
Tomić, N. Z., Marinković, A. D., Balanč, B., Obradović, V., Pavlović, V. B., Manojlović, V.,& Vuksanović, M. M.. (2021). High-performance laminate material based on polyurethane and epoxide reinforced by silica particles from rice husk used for intelligent pedestrian crossings. in Iranian Polymer Journal (English Edition), 30(3), 319-330.
https://doi.org/10.1007/s13726-020-00894-6
Tomić NZ, Marinković AD, Balanč B, Obradović V, Pavlović VB, Manojlović V, Vuksanović MM. High-performance laminate material based on polyurethane and epoxide reinforced by silica particles from rice husk used for intelligent pedestrian crossings. in Iranian Polymer Journal (English Edition). 2021;30(3):319-330.
doi:10.1007/s13726-020-00894-6 .
Tomić, Nataša Z., Marinković, Aleksandar D., Balanč, Bojana, Obradović, Vera, Pavlović, Vladimir B., Manojlović, Vaso, Vuksanović, Marija M., "High-performance laminate material based on polyurethane and epoxide reinforced by silica particles from rice husk used for intelligent pedestrian crossings" in Iranian Polymer Journal (English Edition), 30, no. 3 (2021):319-330,
https://doi.org/10.1007/s13726-020-00894-6 . .
1
3
1
2

Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites

Jelić, Aleksandra; Marinković, Aleksandar D.; Sekulić, Milica; Dikić, Stefan; Ugrinović, Vukašin; Pavlović, Vladimir B.; Putić, Slaviša

(2021)

TY  - JOUR
AU  - Jelić, Aleksandra
AU  - Marinković, Aleksandar D.
AU  - Sekulić, Milica
AU  - Dikić, Stefan
AU  - Ugrinović, Vukašin
AU  - Pavlović, Vladimir B.
AU  - Putić, Slaviša
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9562
AB  - In this study, halloysite nanotubes (HNT) were modified by: 3-glycidyloxypropyltrimethoxysilane (GLYMO), 3-aminopropyltrimethoxysilane (APTES), and 2,2-Bis[4-(glycidyloxy) phenyl] propane (DGEBA), and incorporated in the epoxy resin matrix to enhance its mechanical properties. The HNT/epoxy nanocomposite materials were prepared by mixing different ratios of untreated/treated HNT with neat epoxy resin. Characterization of untreated/treated HNT was performed by Fourier-transformation infrared (FTIR) spectroscopy, and X-ray diffraction (XRD). The quantity of grafted molecules and thermal stability of newly synthesized materials were determined by thermogravimetric (TG) and derivative thermogravimetric (DTG) analysis. Tensile properties of newly synthesized materials were compared, and scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis of the fracture surfaces were performed. Incorporation of APTES modified HNT (HNTAPT) and two-step modification APTES followed by DGEBA (HNTAPTDG) has increased the tensile strength of the nanocomposite materials up to 72% and 61%, and strain at break up to 1082% and 1216%, respectively, compared to neat epoxy. It was concluded that the modification of HNT contributed to the enhancement of the dispersion and the cross-linking in the epoxy resin matrix. © 2021 Society of Plastics Engineers
T2  - Polymer Composites
T1  - Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites
VL  - 42
IS  - 5
SP  - 2180
EP  - 2192
DO  - 10.1002/pc.25967
ER  - 
@article{
author = "Jelić, Aleksandra and Marinković, Aleksandar D. and Sekulić, Milica and Dikić, Stefan and Ugrinović, Vukašin and Pavlović, Vladimir B. and Putić, Slaviša",
year = "2021",
abstract = "In this study, halloysite nanotubes (HNT) were modified by: 3-glycidyloxypropyltrimethoxysilane (GLYMO), 3-aminopropyltrimethoxysilane (APTES), and 2,2-Bis[4-(glycidyloxy) phenyl] propane (DGEBA), and incorporated in the epoxy resin matrix to enhance its mechanical properties. The HNT/epoxy nanocomposite materials were prepared by mixing different ratios of untreated/treated HNT with neat epoxy resin. Characterization of untreated/treated HNT was performed by Fourier-transformation infrared (FTIR) spectroscopy, and X-ray diffraction (XRD). The quantity of grafted molecules and thermal stability of newly synthesized materials were determined by thermogravimetric (TG) and derivative thermogravimetric (DTG) analysis. Tensile properties of newly synthesized materials were compared, and scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis of the fracture surfaces were performed. Incorporation of APTES modified HNT (HNTAPT) and two-step modification APTES followed by DGEBA (HNTAPTDG) has increased the tensile strength of the nanocomposite materials up to 72% and 61%, and strain at break up to 1082% and 1216%, respectively, compared to neat epoxy. It was concluded that the modification of HNT contributed to the enhancement of the dispersion and the cross-linking in the epoxy resin matrix. © 2021 Society of Plastics Engineers",
journal = "Polymer Composites",
title = "Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites",
volume = "42",
number = "5",
pages = "2180-2192",
doi = "10.1002/pc.25967"
}
Jelić, A., Marinković, A. D., Sekulić, M., Dikić, S., Ugrinović, V., Pavlović, V. B.,& Putić, S.. (2021). Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites. in Polymer Composites, 42(5), 2180-2192.
https://doi.org/10.1002/pc.25967
Jelić A, Marinković AD, Sekulić M, Dikić S, Ugrinović V, Pavlović VB, Putić S. Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites. in Polymer Composites. 2021;42(5):2180-2192.
doi:10.1002/pc.25967 .
Jelić, Aleksandra, Marinković, Aleksandar D., Sekulić, Milica, Dikić, Stefan, Ugrinović, Vukašin, Pavlović, Vladimir B., Putić, Slaviša, "Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites" in Polymer Composites, 42, no. 5 (2021):2180-2192,
https://doi.org/10.1002/pc.25967 . .
6
4
4

PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix

Pavlović, Vera P.; Tošić, Dragana; Dojčilović, Radovan; Dudić, Duško; Dramićanin, Miroslav; Medić, Mina; McPherson, Michael M.; Pavlović, Vladimir B.; Vlahović, Branislav; Đoković, Vladimir

(2021)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Tošić, Dragana
AU  - Dojčilović, Radovan
AU  - Dudić, Duško
AU  - Dramićanin, Miroslav
AU  - Medić, Mina
AU  - McPherson, Michael M.
AU  - Pavlović, Vladimir B.
AU  - Vlahović, Branislav
AU  - Đoković, Vladimir
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9563
AB  - Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz. © 2021 The Authors
T2  - Polymer Testing
T1  - PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix
VL  - 96
SP  - 107093
DO  - 10.1016/j.polymertesting.2021.107093
ER  - 
@article{
author = "Pavlović, Vera P. and Tošić, Dragana and Dojčilović, Radovan and Dudić, Duško and Dramićanin, Miroslav and Medić, Mina and McPherson, Michael M. and Pavlović, Vladimir B. and Vlahović, Branislav and Đoković, Vladimir",
year = "2021",
abstract = "Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz. © 2021 The Authors",
journal = "Polymer Testing",
title = "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix",
volume = "96",
pages = "107093",
doi = "10.1016/j.polymertesting.2021.107093"
}
Pavlović, V. P., Tošić, D., Dojčilović, R., Dudić, D., Dramićanin, M., Medić, M., McPherson, M. M., Pavlović, V. B., Vlahović, B.,& Đoković, V.. (2021). PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix. in Polymer Testing, 96, 107093.
https://doi.org/10.1016/j.polymertesting.2021.107093
Pavlović VP, Tošić D, Dojčilović R, Dudić D, Dramićanin M, Medić M, McPherson MM, Pavlović VB, Vlahović B, Đoković V. PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix. in Polymer Testing. 2021;96:107093.
doi:10.1016/j.polymertesting.2021.107093 .
Pavlović, Vera P., Tošić, Dragana, Dojčilović, Radovan, Dudić, Duško, Dramićanin, Miroslav, Medić, Mina, McPherson, Michael M., Pavlović, Vladimir B., Vlahović, Branislav, Đoković, Vladimir, "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix" in Polymer Testing, 96 (2021):107093,
https://doi.org/10.1016/j.polymertesting.2021.107093 . .
1
2
2

Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment

Zmejkoski, Danica; Marković, Zoran M.; Budimir, Milica; Zdravković, Nemanja M.; Trišić, Dijana ; Bugárová, Nikol; Danko, Martin; Kozyrovska, Natalia O.; Špitalský, Zdeno; Kleinová, Angela; Kuzman, Sanja; Pavlović, Vladimir B.; Todorović-Marković, Biljana

(2021)

TY  - JOUR
AU  - Zmejkoski, Danica
AU  - Marković, Zoran M.
AU  - Budimir, Milica
AU  - Zdravković, Nemanja M.
AU  - Trišić, Dijana 
AU  - Bugárová, Nikol
AU  - Danko, Martin
AU  - Kozyrovska, Natalia O.
AU  - Špitalský, Zdeno
AU  - Kleinová, Angela
AU  - Kuzman, Sanja
AU  - Pavlović, Vladimir B.
AU  - Todorović-Marković, Biljana
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9566
AB  - Bacterial infection and their resistance to known antibiotics delays wound healing. In this study, nanochitosan dots (nChiD) produced by gamma irradiation have been encapsulated in bacterial cellulose (BC) polymer matrix to study the antibacterial potentials of these nanocomposites and their possible usage in wound healing treatment (scratch assay). Detailed analyses show that nChiDs have disc-like shape and average diameter in the range of 40 to 60 nm depending of the applied dose. All nChiDs as well as BC-nChiD nanocomposites emit green photoluminescence independently on the excitation wavelengths. The new designed nanocomposites do not have a cytotoxic effect; antioxidant analysis shows their moderate radical scavenging activity whereas antibacterial properties show significant growth inhibition of strains mostly found in difficult-to-heal wounds. The obtained results confirm that new designed BC-nChiD nanocomposites might be potential agent in wound healing treatment. © 2021 Elsevier B.V.
T2  - Materials Science and Engineering: C
T1  - Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment
VL  - 122
SP  - 111925
DO  - 10.1016/j.msec.2021.111925
ER  - 
@article{
author = "Zmejkoski, Danica and Marković, Zoran M. and Budimir, Milica and Zdravković, Nemanja M. and Trišić, Dijana  and Bugárová, Nikol and Danko, Martin and Kozyrovska, Natalia O. and Špitalský, Zdeno and Kleinová, Angela and Kuzman, Sanja and Pavlović, Vladimir B. and Todorović-Marković, Biljana",
year = "2021",
abstract = "Bacterial infection and their resistance to known antibiotics delays wound healing. In this study, nanochitosan dots (nChiD) produced by gamma irradiation have been encapsulated in bacterial cellulose (BC) polymer matrix to study the antibacterial potentials of these nanocomposites and their possible usage in wound healing treatment (scratch assay). Detailed analyses show that nChiDs have disc-like shape and average diameter in the range of 40 to 60 nm depending of the applied dose. All nChiDs as well as BC-nChiD nanocomposites emit green photoluminescence independently on the excitation wavelengths. The new designed nanocomposites do not have a cytotoxic effect; antioxidant analysis shows their moderate radical scavenging activity whereas antibacterial properties show significant growth inhibition of strains mostly found in difficult-to-heal wounds. The obtained results confirm that new designed BC-nChiD nanocomposites might be potential agent in wound healing treatment. © 2021 Elsevier B.V.",
journal = "Materials Science and Engineering: C",
title = "Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment",
volume = "122",
pages = "111925",
doi = "10.1016/j.msec.2021.111925"
}
Zmejkoski, D., Marković, Z. M., Budimir, M., Zdravković, N. M., Trišić, D., Bugárová, N., Danko, M., Kozyrovska, N. O., Špitalský, Z., Kleinová, A., Kuzman, S., Pavlović, V. B.,& Todorović-Marković, B.. (2021). Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment. in Materials Science and Engineering: C, 122, 111925.
https://doi.org/10.1016/j.msec.2021.111925
Zmejkoski D, Marković ZM, Budimir M, Zdravković NM, Trišić D, Bugárová N, Danko M, Kozyrovska NO, Špitalský Z, Kleinová A, Kuzman S, Pavlović VB, Todorović-Marković B. Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment. in Materials Science and Engineering: C. 2021;122:111925.
doi:10.1016/j.msec.2021.111925 .
Zmejkoski, Danica, Marković, Zoran M., Budimir, Milica, Zdravković, Nemanja M., Trišić, Dijana , Bugárová, Nikol, Danko, Martin, Kozyrovska, Natalia O., Špitalský, Zdeno, Kleinová, Angela, Kuzman, Sanja, Pavlović, Vladimir B., Todorović-Marković, Biljana, "Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment" in Materials Science and Engineering: C, 122 (2021):111925,
https://doi.org/10.1016/j.msec.2021.111925 . .
6
6
6

One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications

Kepić, Dejan P.; Kleut, Duška; Marković, Zoran M.; Bajuk-Bogdanović, Danica V.; Pavlović, Vladimir B.; Krmpot, Aleksandar; Lekić, Marina; Jovanović, Dragana J.; Todorović-Marković, Biljana

(2021)

TY  - JOUR
AU  - Kepić, Dejan P.
AU  - Kleut, Duška
AU  - Marković, Zoran M.
AU  - Bajuk-Bogdanović, Danica V.
AU  - Pavlović, Vladimir B.
AU  - Krmpot, Aleksandar
AU  - Lekić, Marina
AU  - Jovanović, Dragana J.
AU  - Todorović-Marković, Biljana
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9568
AB  - Graphene is an excellent material to anchor metal nanoparticles due to its large surface area. In this paper, we report the use of electrochemically exfoliated graphene as support to anchor gold nanoparticles (Au NPs). Au NPs are synthesized via the reduction of chloroauric acid under gamma irradiation at low doses of 1, 5, and 10 kGy and directly deposited onto the graphene surface, making this procedure simple and fast. Good water dispersibility of exfoliated graphene, due to the presence of oxygen-containing functional groups in the structure of graphene, provides long-term stability of Au NPs - graphene composite dispersions. The majority of the Au NPs obtained by this method have sizes of up to 40 nm, while the increase in the applied dose leads to an increase in the amount of smaller nanoparticles. The increase of temperature of the prepared composite material upon irradiation with an 808 nm continuous wave laser was monitored. All samples show a temperature increase between 21.5 and 25.6 °C for 10 min of the laser exposure, which indicates that Au NPs - graphene composite can effectively be used in photothermal treatment for cancer therapy. © 2021 Elsevier Inc.
T2  - Materials Characterization
T1  - One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications
VL  - 173
SP  - 110944
DO  - 10.1016/j.matchar.2021.110944
ER  - 
@article{
author = "Kepić, Dejan P. and Kleut, Duška and Marković, Zoran M. and Bajuk-Bogdanović, Danica V. and Pavlović, Vladimir B. and Krmpot, Aleksandar and Lekić, Marina and Jovanović, Dragana J. and Todorović-Marković, Biljana",
year = "2021",
abstract = "Graphene is an excellent material to anchor metal nanoparticles due to its large surface area. In this paper, we report the use of electrochemically exfoliated graphene as support to anchor gold nanoparticles (Au NPs). Au NPs are synthesized via the reduction of chloroauric acid under gamma irradiation at low doses of 1, 5, and 10 kGy and directly deposited onto the graphene surface, making this procedure simple and fast. Good water dispersibility of exfoliated graphene, due to the presence of oxygen-containing functional groups in the structure of graphene, provides long-term stability of Au NPs - graphene composite dispersions. The majority of the Au NPs obtained by this method have sizes of up to 40 nm, while the increase in the applied dose leads to an increase in the amount of smaller nanoparticles. The increase of temperature of the prepared composite material upon irradiation with an 808 nm continuous wave laser was monitored. All samples show a temperature increase between 21.5 and 25.6 °C for 10 min of the laser exposure, which indicates that Au NPs - graphene composite can effectively be used in photothermal treatment for cancer therapy. © 2021 Elsevier Inc.",
journal = "Materials Characterization",
title = "One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications",
volume = "173",
pages = "110944",
doi = "10.1016/j.matchar.2021.110944"
}
Kepić, D. P., Kleut, D., Marković, Z. M., Bajuk-Bogdanović, D. V., Pavlović, V. B., Krmpot, A., Lekić, M., Jovanović, D. J.,& Todorović-Marković, B.. (2021). One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications. in Materials Characterization, 173, 110944.
https://doi.org/10.1016/j.matchar.2021.110944
Kepić DP, Kleut D, Marković ZM, Bajuk-Bogdanović DV, Pavlović VB, Krmpot A, Lekić M, Jovanović DJ, Todorović-Marković B. One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications. in Materials Characterization. 2021;173:110944.
doi:10.1016/j.matchar.2021.110944 .
Kepić, Dejan P., Kleut, Duška, Marković, Zoran M., Bajuk-Bogdanović, Danica V., Pavlović, Vladimir B., Krmpot, Aleksandar, Lekić, Marina, Jovanović, Dragana J., Todorović-Marković, Biljana, "One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications" in Materials Characterization, 173 (2021):110944,
https://doi.org/10.1016/j.matchar.2021.110944 . .

The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers

Ivanović, Marija; Nenadović, Snežana S.; Pavlović, Vera P.; Radović, Ivona R.; Kijevčanin, Mirjana Lj.; Pavlović, Vladimir B.; Kljajević, Ljiljana M.

(2021)

TY  - JOUR
AU  - Ivanović, Marija
AU  - Nenadović, Snežana S.
AU  - Pavlović, Vera P.
AU  - Radović, Ivona R.
AU  - Kijevčanin, Mirjana Lj.
AU  - Pavlović, Vladimir B.
AU  - Kljajević, Ljiljana M.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9866
AB  - Thermodynamic parameters (densities, viscosities, speed of sound, and refractive index) of four series of alkaline activators were determined over the temperature range from 15 to 60 °C for the process of geopolymerization. Mixtures of Na2SiO3and NaOH of different molar concentrations (from 2M to 8M with step 2) were used as an alkaline activator. The sample with the highest NaOH concentrationalso shows the highest values of all thermodynamic parameters.Metakaolin, obtained by calcination of kaolin at 750 °C, was used as the starting material.The samples were characterized by X-ray diffraction (XRD),FTIR and Raman spectroscopy, Scanning Electron Microscopy (SEM), and Energy-Dispersive X-Ray (EDX) Spectroscopy. Results of FTIR analysis correlated with results of Raman Spectroscopy. Due to the polymerization process, the changes in the phonon spectrum were confirmed. The different concentra-tions of activators do not notably change the Si/Al ratio.
T2  - Macedonian Journal of Chemistry and Chemical Engineering
T1  - The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers
VL  - 40
IS  - 1
SP  - 99
DO  - 10.20450/mjcce.2021.2127
ER  - 
@article{
author = "Ivanović, Marija and Nenadović, Snežana S. and Pavlović, Vera P. and Radović, Ivona R. and Kijevčanin, Mirjana Lj. and Pavlović, Vladimir B. and Kljajević, Ljiljana M.",
year = "2021",
abstract = "Thermodynamic parameters (densities, viscosities, speed of sound, and refractive index) of four series of alkaline activators were determined over the temperature range from 15 to 60 °C for the process of geopolymerization. Mixtures of Na2SiO3and NaOH of different molar concentrations (from 2M to 8M with step 2) were used as an alkaline activator. The sample with the highest NaOH concentrationalso shows the highest values of all thermodynamic parameters.Metakaolin, obtained by calcination of kaolin at 750 °C, was used as the starting material.The samples were characterized by X-ray diffraction (XRD),FTIR and Raman spectroscopy, Scanning Electron Microscopy (SEM), and Energy-Dispersive X-Ray (EDX) Spectroscopy. Results of FTIR analysis correlated with results of Raman Spectroscopy. Due to the polymerization process, the changes in the phonon spectrum were confirmed. The different concentra-tions of activators do not notably change the Si/Al ratio.",
journal = "Macedonian Journal of Chemistry and Chemical Engineering",
title = "The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers",
volume = "40",
number = "1",
pages = "99",
doi = "10.20450/mjcce.2021.2127"
}
Ivanović, M., Nenadović, S. S., Pavlović, V. P., Radović, I. R., Kijevčanin, M. Lj., Pavlović, V. B.,& Kljajević, L. M.. (2021). The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers. in Macedonian Journal of Chemistry and Chemical Engineering, 40(1), 99.
https://doi.org/10.20450/mjcce.2021.2127
Ivanović M, Nenadović SS, Pavlović VP, Radović IR, Kijevčanin ML, Pavlović VB, Kljajević LM. The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers. in Macedonian Journal of Chemistry and Chemical Engineering. 2021;40(1):99.
doi:10.20450/mjcce.2021.2127 .
Ivanović, Marija, Nenadović, Snežana S., Pavlović, Vera P., Radović, Ivona R., Kijevčanin, Mirjana Lj., Pavlović, Vladimir B., Kljajević, Ljiljana M., "The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers" in Macedonian Journal of Chemistry and Chemical Engineering, 40, no. 1 (2021):99,
https://doi.org/10.20450/mjcce.2021.2127 . .
1
1
1

Overcoming phase separation in dual templating: A homogeneous hierarchical ZSM-5 zeolite with flower-like morphology, synthesis and in-depth acidity study

Bosnar, Sanja; Rac, Vladislav; Stošić, Dušan; Travert, Arnaud; Postole, Georgeta; Auroux, Aline; Škapin, Srečo Davor; Damjanović-Vasilić, Ljiljana S.; Bronić, Josip; Du, Xuesen; Marković, Smilja; Pavlović, Vladimir B.; Rakić, Vesna

(2021)

TY  - JOUR
AU  - Bosnar, Sanja
AU  - Rac, Vladislav
AU  - Stošić, Dušan
AU  - Travert, Arnaud
AU  - Postole, Georgeta
AU  - Auroux, Aline
AU  - Škapin, Srečo Davor
AU  - Damjanović-Vasilić, Ljiljana S.
AU  - Bronić, Josip
AU  - Du, Xuesen
AU  - Marković, Smilja
AU  - Pavlović, Vladimir B.
AU  - Rakić, Vesna
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10017
AB  - Dual templating approach, using hexadecyltrimethylammonium bromide (CTAB), was employed in an attempt to synthesize hierarchical ZSM-5 zeolite. Amount of mesoporogen and the duration of aging of the precursor were varied. Majority of the synthesis routes resulted in phase separation, yielding separate ZSM-5 and amorphous mesoporous material. The relative amounts of the two phases were dependent on the CTAB amount ratio and also significantly on the duration of precursor aging before CTAB addition. One particular combination of the two factors led to the formation of a homogeneous hierarchical form of ZSM-5 with leafy morphology, consisting of intergrown thin crystalline sheets which formed flower-like structures. The hierarchical ZSM-5 possessed significant microporous (≈95 m2/g) and highly developed mesoporous surface (≈470 m2/g), with a relatively broad distribution of mesopore sizes (<20 nm). The acidity of all samples was studied in detail. Isothermal microcalorimetry/volumetry of ammonia adsorption provided quantitative data on the number and distribution of strength of acidic sites. In situ FTIR of pyridine and collidine adsorption was used to quantify Brønsted and Lewis acid sites, and to provide information on their location - in the micropores or mesopores/external surface. The hierarchical ZSM-5 possessed both Lewis and Brønsted acidity, with Brønsted sites located mainly in the micropores. All samples were fully characterized using XRD, low temperature nitrogen adsorption, FESEM and EDS. The synthetic route used for obtaining the ZSM-5 zeolite with flower-like morphology is a simple strategy for preparing hierarchical ZSM-5 forms targeting enhanced diffusivity and accessibility of catalytically active sites.
T2  - Microporous and Mesoporous Materials
T1  - Overcoming phase separation in dual templating: A homogeneous hierarchical ZSM-5 zeolite with flower-like morphology, synthesis and in-depth acidity study
VL  - 329
SP  - 111534
DO  - 10.1016/j.micromeso.2021.111534
ER  - 
@article{
author = "Bosnar, Sanja and Rac, Vladislav and Stošić, Dušan and Travert, Arnaud and Postole, Georgeta and Auroux, Aline and Škapin, Srečo Davor and Damjanović-Vasilić, Ljiljana S. and Bronić, Josip and Du, Xuesen and Marković, Smilja and Pavlović, Vladimir B. and Rakić, Vesna",
year = "2021",
abstract = "Dual templating approach, using hexadecyltrimethylammonium bromide (CTAB), was employed in an attempt to synthesize hierarchical ZSM-5 zeolite. Amount of mesoporogen and the duration of aging of the precursor were varied. Majority of the synthesis routes resulted in phase separation, yielding separate ZSM-5 and amorphous mesoporous material. The relative amounts of the two phases were dependent on the CTAB amount ratio and also significantly on the duration of precursor aging before CTAB addition. One particular combination of the two factors led to the formation of a homogeneous hierarchical form of ZSM-5 with leafy morphology, consisting of intergrown thin crystalline sheets which formed flower-like structures. The hierarchical ZSM-5 possessed significant microporous (≈95 m2/g) and highly developed mesoporous surface (≈470 m2/g), with a relatively broad distribution of mesopore sizes (<20 nm). The acidity of all samples was studied in detail. Isothermal microcalorimetry/volumetry of ammonia adsorption provided quantitative data on the number and distribution of strength of acidic sites. In situ FTIR of pyridine and collidine adsorption was used to quantify Brønsted and Lewis acid sites, and to provide information on their location - in the micropores or mesopores/external surface. The hierarchical ZSM-5 possessed both Lewis and Brønsted acidity, with Brønsted sites located mainly in the micropores. All samples were fully characterized using XRD, low temperature nitrogen adsorption, FESEM and EDS. The synthetic route used for obtaining the ZSM-5 zeolite with flower-like morphology is a simple strategy for preparing hierarchical ZSM-5 forms targeting enhanced diffusivity and accessibility of catalytically active sites.",
journal = "Microporous and Mesoporous Materials",
title = "Overcoming phase separation in dual templating: A homogeneous hierarchical ZSM-5 zeolite with flower-like morphology, synthesis and in-depth acidity study",
volume = "329",
pages = "111534",
doi = "10.1016/j.micromeso.2021.111534"
}
Bosnar, S., Rac, V., Stošić, D., Travert, A., Postole, G., Auroux, A., Škapin, S. D., Damjanović-Vasilić, L. S., Bronić, J., Du, X., Marković, S., Pavlović, V. B.,& Rakić, V.. (2021). Overcoming phase separation in dual templating: A homogeneous hierarchical ZSM-5 zeolite with flower-like morphology, synthesis and in-depth acidity study. in Microporous and Mesoporous Materials, 329, 111534.
https://doi.org/10.1016/j.micromeso.2021.111534
Bosnar S, Rac V, Stošić D, Travert A, Postole G, Auroux A, Škapin SD, Damjanović-Vasilić LS, Bronić J, Du X, Marković S, Pavlović VB, Rakić V. Overcoming phase separation in dual templating: A homogeneous hierarchical ZSM-5 zeolite with flower-like morphology, synthesis and in-depth acidity study. in Microporous and Mesoporous Materials. 2021;329:111534.
doi:10.1016/j.micromeso.2021.111534 .
Bosnar, Sanja, Rac, Vladislav, Stošić, Dušan, Travert, Arnaud, Postole, Georgeta, Auroux, Aline, Škapin, Srečo Davor, Damjanović-Vasilić, Ljiljana S., Bronić, Josip, Du, Xuesen, Marković, Smilja, Pavlović, Vladimir B., Rakić, Vesna, "Overcoming phase separation in dual templating: A homogeneous hierarchical ZSM-5 zeolite with flower-like morphology, synthesis and in-depth acidity study" in Microporous and Mesoporous Materials, 329 (2021):111534,
https://doi.org/10.1016/j.micromeso.2021.111534 . .
3
2
1
1

Potential Usage of Hybrid Polymers Binders Based on Fly Ash with the Addition of PVA with Satisfying Mechanical and Radiological Properties

Mirković, Miljana M.; Kljajević, Ljiljana M.; Dolenec, Sabina; Nenadović, Miloš; Pavlović, Vladimir B.; Rajačić, Milica; Nenadović, Snežana S.

(2021)

TY  - JOUR
AU  - Mirković, Miljana M.
AU  - Kljajević, Ljiljana M.
AU  - Dolenec, Sabina
AU  - Nenadović, Miloš
AU  - Pavlović, Vladimir B.
AU  - Rajačić, Milica
AU  - Nenadović, Snežana S.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10092
AB  - Since recycled technologies usage is mandatory for environmental safety, and in this regard, it is important to examine new materials that can be used in construction and are primarily produced from fly ash. In addition to characteristics such as hardness and compressive strength, the given materials must also be radiologically and environmentally safe. The main concept of engineered geopolymer gel composites based on fly ash residues is focused on developing binder materials via gel formation processes that can replace ordinary cement materials. This study is unique in researching the potential use of fly ash from the Nikola Tesla thermal power plant in Serbia, where the hybrid geopolymeric materials synthesized from fly ash are experimentally examined with the addition 1 wt% and 2 wt% of polyvinyl alcohol (PVA). This paper aims to investigate the structural, morphological, mechanical, and radiological properties of hybrid materials with the addition of PVA and without additive in the period of ageing for 28 days at room temperature. The phase composition was investigated using X-ray powder diffraction (XRPD) analysis, while morphological characteristics of these materials were examined using scanning electron microscopy and energy dispersive X-ray analysis (SEM-EDS). Vibrational spectra of obtained samples are investigated using diffuse reflectance infrared Fourier transform (DRIFT) and Fourier transform infrared (FTIR) techniques. The hardness and compressive strength are also examined, indicating that the 1 wt% addition in geopolymeric matrix results in the best mechanical properties. Radiological measurements of investigated all geopolymer samples show decreasing activity concentrations of radionuclides for 50% compared to fly ash.
T2  - Gels
T1  - Potential Usage of Hybrid Polymers Binders Based on Fly Ash with the Addition of PVA with Satisfying Mechanical and Radiological Properties
VL  - 7
IS  - 4
SP  - 270
DO  - 10.3390/gels7040270
ER  - 
@article{
author = "Mirković, Miljana M. and Kljajević, Ljiljana M. and Dolenec, Sabina and Nenadović, Miloš and Pavlović, Vladimir B. and Rajačić, Milica and Nenadović, Snežana S.",
year = "2021",
abstract = "Since recycled technologies usage is mandatory for environmental safety, and in this regard, it is important to examine new materials that can be used in construction and are primarily produced from fly ash. In addition to characteristics such as hardness and compressive strength, the given materials must also be radiologically and environmentally safe. The main concept of engineered geopolymer gel composites based on fly ash residues is focused on developing binder materials via gel formation processes that can replace ordinary cement materials. This study is unique in researching the potential use of fly ash from the Nikola Tesla thermal power plant in Serbia, where the hybrid geopolymeric materials synthesized from fly ash are experimentally examined with the addition 1 wt% and 2 wt% of polyvinyl alcohol (PVA). This paper aims to investigate the structural, morphological, mechanical, and radiological properties of hybrid materials with the addition of PVA and without additive in the period of ageing for 28 days at room temperature. The phase composition was investigated using X-ray powder diffraction (XRPD) analysis, while morphological characteristics of these materials were examined using scanning electron microscopy and energy dispersive X-ray analysis (SEM-EDS). Vibrational spectra of obtained samples are investigated using diffuse reflectance infrared Fourier transform (DRIFT) and Fourier transform infrared (FTIR) techniques. The hardness and compressive strength are also examined, indicating that the 1 wt% addition in geopolymeric matrix results in the best mechanical properties. Radiological measurements of investigated all geopolymer samples show decreasing activity concentrations of radionuclides for 50% compared to fly ash.",
journal = "Gels",
title = "Potential Usage of Hybrid Polymers Binders Based on Fly Ash with the Addition of PVA with Satisfying Mechanical and Radiological Properties",
volume = "7",
number = "4",
pages = "270",
doi = "10.3390/gels7040270"
}
Mirković, M. M., Kljajević, L. M., Dolenec, S., Nenadović, M., Pavlović, V. B., Rajačić, M.,& Nenadović, S. S.. (2021). Potential Usage of Hybrid Polymers Binders Based on Fly Ash with the Addition of PVA with Satisfying Mechanical and Radiological Properties. in Gels, 7(4), 270.
https://doi.org/10.3390/gels7040270
Mirković MM, Kljajević LM, Dolenec S, Nenadović M, Pavlović VB, Rajačić M, Nenadović SS. Potential Usage of Hybrid Polymers Binders Based on Fly Ash with the Addition of PVA with Satisfying Mechanical and Radiological Properties. in Gels. 2021;7(4):270.
doi:10.3390/gels7040270 .
Mirković, Miljana M., Kljajević, Ljiljana M., Dolenec, Sabina, Nenadović, Miloš, Pavlović, Vladimir B., Rajačić, Milica, Nenadović, Snežana S., "Potential Usage of Hybrid Polymers Binders Based on Fly Ash with the Addition of PVA with Satisfying Mechanical and Radiological Properties" in Gels, 7, no. 4 (2021):270,
https://doi.org/10.3390/gels7040270 . .
3
1

Graphene quantum dots as singlet oxygen producer or radical quencher - The matter of functionalization with urea/thiourea

Jovanović, Svetlana P.; Syrgiannis, Zois; Budimir, Milica; Milivojević, Dušan; Jovanović, Dragana J.; Pavlović, Vladimir B.; Papan, Jelena; Bartenwerfer, Malte; Mojsin, Marija M.; Stevanović, Milena J.; Todorović-Marković, Biljana

(2020)

TY  - JOUR
AU  - Jovanović, Svetlana P.
AU  - Syrgiannis, Zois
AU  - Budimir, Milica
AU  - Milivojević, Dušan
AU  - Jovanović, Dragana J.
AU  - Pavlović, Vladimir B.
AU  - Papan, Jelena
AU  - Bartenwerfer, Malte
AU  - Mojsin, Marija M.
AU  - Stevanović, Milena J.
AU  - Todorović-Marković, Biljana
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8672
AB  - Due to their low cost and possible green synthesis, high stability and resistance to photobleaching, graphene quantum dots (GQDs) can be considered as one of the class of carbon nanomaterials which may have great potential as an agent for photosensitized oxygen activation. In such a way, GQDs can be used as a theranostic agent in photodynamic therapy. In this work pristine GQDs, GQDs irradiated with gamma rays and GQDs doped with N and N, S atoms are produced using a simple, green approach. By using different techniques (AFM, HR-TEM, SEM-EDS, FTIR, XRD, PL and UV–Vis) we investigated structural and optical properties of the new types of GQDs. We showed that GQDs functionalized with thiourea (GQDs-TU) completely lost the ability to produce singlet oxygen (1O2) upon photoexcitation while functionalization with urea (GQDs-U) improves the capability of GQDs to produce 1O2 upon the same conditions. Thus, presented GQDs modification with urea seems like a promising approach for the production of the efficient photosensitizer. On the opposite, GQDs-TU are efficient [rad]OH quencher. Due to high singlet oxygen production and low cytotoxicity below 100 μg/mL against HeLa cells, GQDs-U is a good candidate as an agent in photodynamic therapy at this concentration. © 2019
T2  - Materials Science and Engineering: C
T1  - Graphene quantum dots as singlet oxygen producer or radical quencher - The matter of functionalization with urea/thiourea
VL  - 109
SP  - 110539
DO  - 10.1016/j.msec.2019.110539
ER  - 
@article{
author = "Jovanović, Svetlana P. and Syrgiannis, Zois and Budimir, Milica and Milivojević, Dušan and Jovanović, Dragana J. and Pavlović, Vladimir B. and Papan, Jelena and Bartenwerfer, Malte and Mojsin, Marija M. and Stevanović, Milena J. and Todorović-Marković, Biljana",
year = "2020",
abstract = "Due to their low cost and possible green synthesis, high stability and resistance to photobleaching, graphene quantum dots (GQDs) can be considered as one of the class of carbon nanomaterials which may have great potential as an agent for photosensitized oxygen activation. In such a way, GQDs can be used as a theranostic agent in photodynamic therapy. In this work pristine GQDs, GQDs irradiated with gamma rays and GQDs doped with N and N, S atoms are produced using a simple, green approach. By using different techniques (AFM, HR-TEM, SEM-EDS, FTIR, XRD, PL and UV–Vis) we investigated structural and optical properties of the new types of GQDs. We showed that GQDs functionalized with thiourea (GQDs-TU) completely lost the ability to produce singlet oxygen (1O2) upon photoexcitation while functionalization with urea (GQDs-U) improves the capability of GQDs to produce 1O2 upon the same conditions. Thus, presented GQDs modification with urea seems like a promising approach for the production of the efficient photosensitizer. On the opposite, GQDs-TU are efficient [rad]OH quencher. Due to high singlet oxygen production and low cytotoxicity below 100 μg/mL against HeLa cells, GQDs-U is a good candidate as an agent in photodynamic therapy at this concentration. © 2019",
journal = "Materials Science and Engineering: C",
title = "Graphene quantum dots as singlet oxygen producer or radical quencher - The matter of functionalization with urea/thiourea",
volume = "109",
pages = "110539",
doi = "10.1016/j.msec.2019.110539"
}
Jovanović, S. P., Syrgiannis, Z., Budimir, M., Milivojević, D., Jovanović, D. J., Pavlović, V. B., Papan, J., Bartenwerfer, M., Mojsin, M. M., Stevanović, M. J.,& Todorović-Marković, B.. (2020). Graphene quantum dots as singlet oxygen producer or radical quencher - The matter of functionalization with urea/thiourea. in Materials Science and Engineering: C, 109, 110539.
https://doi.org/10.1016/j.msec.2019.110539
Jovanović SP, Syrgiannis Z, Budimir M, Milivojević D, Jovanović DJ, Pavlović VB, Papan J, Bartenwerfer M, Mojsin MM, Stevanović MJ, Todorović-Marković B. Graphene quantum dots as singlet oxygen producer or radical quencher - The matter of functionalization with urea/thiourea. in Materials Science and Engineering: C. 2020;109:110539.
doi:10.1016/j.msec.2019.110539 .
Jovanović, Svetlana P., Syrgiannis, Zois, Budimir, Milica, Milivojević, Dušan, Jovanović, Dragana J., Pavlović, Vladimir B., Papan, Jelena, Bartenwerfer, Malte, Mojsin, Marija M., Stevanović, Milena J., Todorović-Marković, Biljana, "Graphene quantum dots as singlet oxygen producer or radical quencher - The matter of functionalization with urea/thiourea" in Materials Science and Engineering: C, 109 (2020):110539,
https://doi.org/10.1016/j.msec.2019.110539 . .
19
15
14

Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times

Miljković, Miljana; Kljajević, Ljiljana M.; Filipović, Suzana; Pavlović, Vladimir B.; Nenadović, Snežana S.

(2020)

TY  - JOUR
AU  - Miljković, Miljana
AU  - Kljajević, Ljiljana M.
AU  - Filipović, Suzana
AU  - Pavlović, Vladimir B.
AU  - Nenadović, Snežana S.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8916
AB  - The aim of the study was to investigate the influence of low heating temperatures with two different retention times to optimize the process for obtaining nanosized hydroxyapatite material that can possibly be used in the fields of biology and pharmacy. Nanosized hydroxyapatite was successfully obtained by wet chemical precipitation. The annealing of the material performed at 300 oC with two different retention times i.e. 3 and 6 hours in air atmosphere. Low annealing temperature with extended retention time was selected in terms to reduce energy consumption. FTIR spectroscopy was used to confirm characteristic vibrational bands of hydroxyapatite samples, and presence of carbonate bands of hydroxyapatite annealed for 3h and 6h. X-Ray powder diffraction analysis were used to examine phase composition, determine the size of unit cells and crystallite sizes, and SEMEDS methods were used to obtain particle size and arrangement also grain growth morphology and confirmed the presence of calcium, phosphorous oxygen and carbonate peaks. The results show that different retention time has influence on particle growth as well as unit cell parameters and crystallite sizes changes of hydroxyapatite material.
T2  - Science of Sintering
T1  - Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times
VL  - 52
IS  - 4
SP  - 405
EP  - 413
DO  - 10.2298/SOS2004405M
ER  - 
@article{
author = "Miljković, Miljana and Kljajević, Ljiljana M. and Filipović, Suzana and Pavlović, Vladimir B. and Nenadović, Snežana S.",
year = "2020",
abstract = "The aim of the study was to investigate the influence of low heating temperatures with two different retention times to optimize the process for obtaining nanosized hydroxyapatite material that can possibly be used in the fields of biology and pharmacy. Nanosized hydroxyapatite was successfully obtained by wet chemical precipitation. The annealing of the material performed at 300 oC with two different retention times i.e. 3 and 6 hours in air atmosphere. Low annealing temperature with extended retention time was selected in terms to reduce energy consumption. FTIR spectroscopy was used to confirm characteristic vibrational bands of hydroxyapatite samples, and presence of carbonate bands of hydroxyapatite annealed for 3h and 6h. X-Ray powder diffraction analysis were used to examine phase composition, determine the size of unit cells and crystallite sizes, and SEMEDS methods were used to obtain particle size and arrangement also grain growth morphology and confirmed the presence of calcium, phosphorous oxygen and carbonate peaks. The results show that different retention time has influence on particle growth as well as unit cell parameters and crystallite sizes changes of hydroxyapatite material.",
journal = "Science of Sintering",
title = "Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times",
volume = "52",
number = "4",
pages = "405-413",
doi = "10.2298/SOS2004405M"
}
Miljković, M., Kljajević, L. M., Filipović, S., Pavlović, V. B.,& Nenadović, S. S.. (2020). Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times. in Science of Sintering, 52(4), 405-413.
https://doi.org/10.2298/SOS2004405M
Miljković M, Kljajević LM, Filipović S, Pavlović VB, Nenadović SS. Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times. in Science of Sintering. 2020;52(4):405-413.
doi:10.2298/SOS2004405M .
Miljković, Miljana, Kljajević, Ljiljana M., Filipović, Suzana, Pavlović, Vladimir B., Nenadović, Snežana S., "Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times" in Science of Sintering, 52, no. 4 (2020):405-413,
https://doi.org/10.2298/SOS2004405M . .
2
1
1

The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films

Kalifa, Mustafa; Tomić, Nataša Z.; Vuksanović, Marija M.; Stevanović, Sanja; Đokić, Veljko; Volkov-Husović, Tatjana; Pavlović, Vladimir B.; Jančić-Heinemann, Radmila; Marinković, Aleksandar D.

(2020)

TY  - JOUR
AU  - Kalifa, Mustafa
AU  - Tomić, Nataša Z.
AU  - Vuksanović, Marija M.
AU  - Stevanović, Sanja
AU  - Đokić, Veljko
AU  - Volkov-Husović, Tatjana
AU  - Pavlović, Vladimir B.
AU  - Jančić-Heinemann, Radmila
AU  - Marinković, Aleksandar D.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9001
AB  - Cavitation erosion of hybrid acrylate composite films with polyhedraloligosilsesquioxanes (POSS) was investigated in this study. The hybrid films aremade with 1, 3 and 5 wt% of POSS reagents containing: (a) hydroxyl (POSS-M),(b) both hydroxyl and allyl (POSS-M-A) and (c) methacryloyl groups (POSS-MCl).Addition of 5 wt% POSS-M-A caused the highest microhardness increase for49.8%, in comparison to the pure matrix material. Cavitation resistance of hybridfilms, estimated as the time-dependent mass loss, was improved by POSS addition.POSS-M-A addition (5 wt%) contributed to 94% lower mass loss comparingto pure Bis-GMA/TEGDMA film. Scanning electron (SEM) and atomic forcemicroscopy (AFM) showed the lowest surface roughness obtained for compositewith POSS-M-A. The improved hardness and wear resistance of the compositefilms indicated that POSS-M-A filler enhanced interfacial adhesion and reinforcingof the Bis-GMA/TEGDMA matrix.
T2  - Polymer Composites
T1  - The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films
SP  - 3403
EP  - 3410
DO  - 10.1002/pc.25629
ER  - 
@article{
author = "Kalifa, Mustafa and Tomić, Nataša Z. and Vuksanović, Marija M. and Stevanović, Sanja and Đokić, Veljko and Volkov-Husović, Tatjana and Pavlović, Vladimir B. and Jančić-Heinemann, Radmila and Marinković, Aleksandar D.",
year = "2020",
abstract = "Cavitation erosion of hybrid acrylate composite films with polyhedraloligosilsesquioxanes (POSS) was investigated in this study. The hybrid films aremade with 1, 3 and 5 wt% of POSS reagents containing: (a) hydroxyl (POSS-M),(b) both hydroxyl and allyl (POSS-M-A) and (c) methacryloyl groups (POSS-MCl).Addition of 5 wt% POSS-M-A caused the highest microhardness increase for49.8%, in comparison to the pure matrix material. Cavitation resistance of hybridfilms, estimated as the time-dependent mass loss, was improved by POSS addition.POSS-M-A addition (5 wt%) contributed to 94% lower mass loss comparingto pure Bis-GMA/TEGDMA film. Scanning electron (SEM) and atomic forcemicroscopy (AFM) showed the lowest surface roughness obtained for compositewith POSS-M-A. The improved hardness and wear resistance of the compositefilms indicated that POSS-M-A filler enhanced interfacial adhesion and reinforcingof the Bis-GMA/TEGDMA matrix.",
journal = "Polymer Composites",
title = "The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films",
pages = "3403-3410",
doi = "10.1002/pc.25629"
}
Kalifa, M., Tomić, N. Z., Vuksanović, M. M., Stevanović, S., Đokić, V., Volkov-Husović, T., Pavlović, V. B., Jančić-Heinemann, R.,& Marinković, A. D.. (2020). The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films. in Polymer Composites, 3403-3410.
https://doi.org/10.1002/pc.25629
Kalifa M, Tomić NZ, Vuksanović MM, Stevanović S, Đokić V, Volkov-Husović T, Pavlović VB, Jančić-Heinemann R, Marinković AD. The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films. in Polymer Composites. 2020;:3403-3410.
doi:10.1002/pc.25629 .
Kalifa, Mustafa, Tomić, Nataša Z., Vuksanović, Marija M., Stevanović, Sanja, Đokić, Veljko, Volkov-Husović, Tatjana, Pavlović, Vladimir B., Jančić-Heinemann, Radmila, Marinković, Aleksandar D., "The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films" in Polymer Composites (2020):3403-3410,
https://doi.org/10.1002/pc.25629 . .
1

Highly Efficient Antioxidant F- and Cl-Doped Carbon Quantum Dots for Bioimaging

Marković, Zoran M.; Labudová, Martina; Danko, Martin; Matijašević, Danka; Mičušík, Matej; Nádaždy, Vojtech; Kováčová, Mária; Kleinová, Angela; Špitalský, Zdeno; Pavlović, Vladimir B.; Milivojević, Dušan D.; Medić, Mina; Todorović-Marković, Biljana

(2020)

TY  - JOUR
AU  - Marković, Zoran M.
AU  - Labudová, Martina
AU  - Danko, Martin
AU  - Matijašević, Danka
AU  - Mičušík, Matej
AU  - Nádaždy, Vojtech
AU  - Kováčová, Mária
AU  - Kleinová, Angela
AU  - Špitalský, Zdeno
AU  - Pavlović, Vladimir B.
AU  - Milivojević, Dušan D.
AU  - Medić, Mina
AU  - Todorović-Marković, Biljana
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9733
AB  - The addition of heteroatoms to pristine carbon quantum dots (CQDs) change their structure and optical properties. In this study, fluorine (F)- and chlorine (Cl)-doped CQDs are prepared by the one-step green hydrothermal route from sodium fluoride, sodium chloride, urea, and citric acid as the starting precursors. Microscopy analysis reveals that the average size of these quantum dots is 5 ± 2 nm, whereas the chemical study shows the existence of C–F and C–Cl bonds. The produced F- and Cl-doped CQDs have fluorescence quantum yields of 0.151 and 0.284, respectively, at an excitation wavelength of 450 nm. Charge transfer resistance of F- and Cl-doped CQDs films is 2 orders of magnitude higher than in the pristine CQD films. Transport band gap of the doped CQDs is 2 eV bigger than that of pristine CQDs. Radical scavenging activity shows very good antioxidant activity of doped CQDs. Antibacterial testing reveals poor antibacterial activity against Staphylococcus aureus and Escherichia coli. The F- and Cl-doped CQDs are successfully used as fluorescent probes for cell imaging as shown by confocal microscopy.
T2  - ACS Sustainable Chemistry & Engineering
T1  - Highly Efficient Antioxidant F- and Cl-Doped Carbon Quantum Dots for Bioimaging
VL  - 8
IS  - 43
SP  - 16327
EP  - 16338
DO  - 10.1021/acssuschemeng.0c06260
ER  - 
@article{
author = "Marković, Zoran M. and Labudová, Martina and Danko, Martin and Matijašević, Danka and Mičušík, Matej and Nádaždy, Vojtech and Kováčová, Mária and Kleinová, Angela and Špitalský, Zdeno and Pavlović, Vladimir B. and Milivojević, Dušan D. and Medić, Mina and Todorović-Marković, Biljana",
year = "2020",
abstract = "The addition of heteroatoms to pristine carbon quantum dots (CQDs) change their structure and optical properties. In this study, fluorine (F)- and chlorine (Cl)-doped CQDs are prepared by the one-step green hydrothermal route from sodium fluoride, sodium chloride, urea, and citric acid as the starting precursors. Microscopy analysis reveals that the average size of these quantum dots is 5 ± 2 nm, whereas the chemical study shows the existence of C–F and C–Cl bonds. The produced F- and Cl-doped CQDs have fluorescence quantum yields of 0.151 and 0.284, respectively, at an excitation wavelength of 450 nm. Charge transfer resistance of F- and Cl-doped CQDs films is 2 orders of magnitude higher than in the pristine CQD films. Transport band gap of the doped CQDs is 2 eV bigger than that of pristine CQDs. Radical scavenging activity shows very good antioxidant activity of doped CQDs. Antibacterial testing reveals poor antibacterial activity against Staphylococcus aureus and Escherichia coli. The F- and Cl-doped CQDs are successfully used as fluorescent probes for cell imaging as shown by confocal microscopy.",
journal = "ACS Sustainable Chemistry & Engineering",
title = "Highly Efficient Antioxidant F- and Cl-Doped Carbon Quantum Dots for Bioimaging",
volume = "8",
number = "43",
pages = "16327-16338",
doi = "10.1021/acssuschemeng.0c06260"
}
Marković, Z. M., Labudová, M., Danko, M., Matijašević, D., Mičušík, M., Nádaždy, V., Kováčová, M., Kleinová, A., Špitalský, Z., Pavlović, V. B., Milivojević, D. D., Medić, M.,& Todorović-Marković, B.. (2020). Highly Efficient Antioxidant F- and Cl-Doped Carbon Quantum Dots for Bioimaging. in ACS Sustainable Chemistry & Engineering, 8(43), 16327-16338.
https://doi.org/10.1021/acssuschemeng.0c06260
Marković ZM, Labudová M, Danko M, Matijašević D, Mičušík M, Nádaždy V, Kováčová M, Kleinová A, Špitalský Z, Pavlović VB, Milivojević DD, Medić M, Todorović-Marković B. Highly Efficient Antioxidant F- and Cl-Doped Carbon Quantum Dots for Bioimaging. in ACS Sustainable Chemistry & Engineering. 2020;8(43):16327-16338.
doi:10.1021/acssuschemeng.0c06260 .
Marković, Zoran M., Labudová, Martina, Danko, Martin, Matijašević, Danka, Mičušík, Matej, Nádaždy, Vojtech, Kováčová, Mária, Kleinová, Angela, Špitalský, Zdeno, Pavlović, Vladimir B., Milivojević, Dušan D., Medić, Mina, Todorović-Marković, Biljana, "Highly Efficient Antioxidant F- and Cl-Doped Carbon Quantum Dots for Bioimaging" in ACS Sustainable Chemistry & Engineering, 8, no. 43 (2020):16327-16338,
https://doi.org/10.1021/acssuschemeng.0c06260 . .
19
13
17

Polyamidoamine as a clay modifier and curing agent in preparation of epoxy nanocomposites

Tomić, Miloš; Dunjić, Branko; Nikolić, Marija S.; Trifković, Kata; Stanković, Nadežda; Pavlović, Vladimir B.; Bajat, Jelena B.; Đonlagić, Jasna A.

(2019)

TY  - JOUR
AU  - Tomić, Miloš
AU  - Dunjić, Branko
AU  - Nikolić, Marija S.
AU  - Trifković, Kata
AU  - Stanković, Nadežda
AU  - Pavlović, Vladimir B.
AU  - Bajat, Jelena B.
AU  - Đonlagić, Jasna A.
PY  - 2019
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0300944018312487
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8076
AB  - In the present study the commercial multifunctional fatty acid polyamidoamine (PAA) was for the first time simultaneously applied as a curing agent and clay modifier for epoxy/clay nanocomposites (NC) based on diglycidyl ether of bisphenol A. The montmorillonite (Cloisite®Na + ) was modified with different quantities of partially and fully protonated polyamidoamine. The NCs with 0.5 wt% novel organoclay were prepared by solution intercalation method. The major aims of this paper are investigations of the effects of the composition of PAA modified clays on structure, mechanical, barrier properties and corrosion stability on steel substrates of NCs were studied. The thermogravimetric, flame photometry and X-ray diffraction analyses confirmed the efficient modification of clay surface with polyamidoamine, predominantly located within layers. The NCs exhibited an intercalated/exfoliated morphology and the presence of free amino groups and increased content of modifier facilitated dispersion of clay particles within the polymer matrix, as shown by electron microscopy techniques (SEM, TEM). Under an optimized loading of PAA (molar quantity of total amino groups per clay cation exchange capacity of 1.75), the layers in stacks were separated by 5.0 nm and high number of individual layers was present in NC. Clay modified by PAA with free amino groups showed increased storage modulus in the rubbery state, glass transition temperature of NCs, while dumping factor was decreased. The tensile test confirmed that introduction of flexible modifier on the epoxy/clay interface lead to increase in the ultimate tensile strenght and elongation at break by 31% and toughness up to 83%. The electrochemical impedance spectroscopy and permeability tests proved the pronounced barrier effect of clay particles against corrosive species and water vapor when high dispersion degree of clay in NC was achieved. © 2019 Elsevier B.V.
T2  - Progress in Organic Coatings
T1  - Polyamidoamine as a clay modifier and curing agent in preparation of epoxy nanocomposites
VL  - 131
SP  - 311
EP  - 321
DO  - 10.1016/j.porgcoat.2019.02.037
ER  - 
@article{
author = "Tomić, Miloš and Dunjić, Branko and Nikolić, Marija S. and Trifković, Kata and Stanković, Nadežda and Pavlović, Vladimir B. and Bajat, Jelena B. and Đonlagić, Jasna A.",
year = "2019",
abstract = "In the present study the commercial multifunctional fatty acid polyamidoamine (PAA) was for the first time simultaneously applied as a curing agent and clay modifier for epoxy/clay nanocomposites (NC) based on diglycidyl ether of bisphenol A. The montmorillonite (Cloisite®Na + ) was modified with different quantities of partially and fully protonated polyamidoamine. The NCs with 0.5 wt% novel organoclay were prepared by solution intercalation method. The major aims of this paper are investigations of the effects of the composition of PAA modified clays on structure, mechanical, barrier properties and corrosion stability on steel substrates of NCs were studied. The thermogravimetric, flame photometry and X-ray diffraction analyses confirmed the efficient modification of clay surface with polyamidoamine, predominantly located within layers. The NCs exhibited an intercalated/exfoliated morphology and the presence of free amino groups and increased content of modifier facilitated dispersion of clay particles within the polymer matrix, as shown by electron microscopy techniques (SEM, TEM). Under an optimized loading of PAA (molar quantity of total amino groups per clay cation exchange capacity of 1.75), the layers in stacks were separated by 5.0 nm and high number of individual layers was present in NC. Clay modified by PAA with free amino groups showed increased storage modulus in the rubbery state, glass transition temperature of NCs, while dumping factor was decreased. The tensile test confirmed that introduction of flexible modifier on the epoxy/clay interface lead to increase in the ultimate tensile strenght and elongation at break by 31% and toughness up to 83%. The electrochemical impedance spectroscopy and permeability tests proved the pronounced barrier effect of clay particles against corrosive species and water vapor when high dispersion degree of clay in NC was achieved. © 2019 Elsevier B.V.",
journal = "Progress in Organic Coatings",
title = "Polyamidoamine as a clay modifier and curing agent in preparation of epoxy nanocomposites",
volume = "131",
pages = "311-321",
doi = "10.1016/j.porgcoat.2019.02.037"
}
Tomić, M., Dunjić, B., Nikolić, M. S., Trifković, K., Stanković, N., Pavlović, V. B., Bajat, J. B.,& Đonlagić, J. A.. (2019). Polyamidoamine as a clay modifier and curing agent in preparation of epoxy nanocomposites. in Progress in Organic Coatings, 131, 311-321.
https://doi.org/10.1016/j.porgcoat.2019.02.037
Tomić M, Dunjić B, Nikolić MS, Trifković K, Stanković N, Pavlović VB, Bajat JB, Đonlagić JA. Polyamidoamine as a clay modifier and curing agent in preparation of epoxy nanocomposites. in Progress in Organic Coatings. 2019;131:311-321.
doi:10.1016/j.porgcoat.2019.02.037 .
Tomić, Miloš, Dunjić, Branko, Nikolić, Marija S., Trifković, Kata, Stanković, Nadežda, Pavlović, Vladimir B., Bajat, Jelena B., Đonlagić, Jasna A., "Polyamidoamine as a clay modifier and curing agent in preparation of epoxy nanocomposites" in Progress in Organic Coatings, 131 (2019):311-321,
https://doi.org/10.1016/j.porgcoat.2019.02.037 . .
9
7
7

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena D.; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(2019)

TY  - JOUR
AU  - Rusmirović, Jelena D.
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8096
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-?-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g -1 for WL-?-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g -1 for Cd 2+ , Ni 2+ , phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-?-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-?-APS. © 2019, Springer-Verlag GmbH Germany, part of Springer Nature.
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
VL  - 26
IS  - 12
SP  - 12379
EP  - 12398
DO  - 10.1007/s11356-019-04625-0
ER  - 
@article{
author = "Rusmirović, Jelena D. and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-?-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g -1 for WL-?-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g -1 for Cd 2+ , Ni 2+ , phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-?-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-?-APS. © 2019, Springer-Verlag GmbH Germany, part of Springer Nature.",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
volume = "26",
number = "12",
pages = "12379-12398",
doi = "10.1007/s11356-019-04625-0"
}
Rusmirović, J. D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B.. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research, 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0
Rusmirović JD, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0 .
Rusmirović, Jelena D., Obradović, Nina, Perendija, Jovana, Umićević, Ana, Kapidžić, Ana, Vlahović, Branislav, Pavlović, Vera P., Marinković, Aleksandar D., Pavlović, Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" in Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 . .
1
5
6
6

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena D.; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(2019)

TY  - JOUR
AU  - Rusmirović, Jelena D.
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8101
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
VL  - 26
IS  - 12
SP  - 12379
EP  - 12398
DO  - 10.1007/s11356-019-04625-0
ER  - 
@article{
author = "Rusmirović, Jelena D. and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
volume = "26",
number = "12",
pages = "12379-12398",
doi = "10.1007/s11356-019-04625-0"
}
Rusmirović, J. D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B.. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research, 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0
Rusmirović JD, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0 .
Rusmirović, Jelena D., Obradović, Nina, Perendija, Jovana, Umićević, Ana, Kapidžić, Ana, Vlahović, Branislav, Pavlović, Vera P., Marinković, Aleksandar D., Pavlović, Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" in Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 . .
1
5
6
6

Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure

Filipović, Suzana; Pavlović, Vera P.; Mitrić, Miodrag; Lević, Steva; Mitrović, Nebojša; Maričić, Aleksa; Vlahović, Branislav; Pavlović, Vladimir B.

(2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Lević, Steva
AU  - Mitrović, Nebojša
AU  - Maričić, Aleksa
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://doi.org/10.1007/s40145-018-0301-5
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8103
AB  - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.
T2  - Journal of Advanced Ceramics
T1  - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure
VL  - 8
IS  - 1
SP  - 133
EP  - 147
DO  - 10.1007/s40145-018-0301-5
ER  - 
@article{
author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.",
journal = "Journal of Advanced Ceramics",
title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure",
volume = "8",
number = "1",
pages = "133-147",
doi = "10.1007/s40145-018-0301-5"
}
Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B.. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics, 8(1), 133-147.
https://doi.org/10.1007/s40145-018-0301-5
Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics. 2019;8(1):133-147.
doi:10.1007/s40145-018-0301-5 .
Filipović, Suzana, Pavlović, Vera P., Mitrić, Miodrag, Lević, Steva, Mitrović, Nebojša, Maričić, Aleksa, Vlahović, Branislav, Pavlović, Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" in Journal of Advanced Ceramics, 8, no. 1 (2019):133-147,
https://doi.org/10.1007/s40145-018-0301-5 . .
1
6
9
8

Characterization of glycidyl methacrylate based magnetic nanocomposites

Marković, Bojana M.; Spasojević, Vojislav; Dapčević, Aleksandra; Vuković, Zorica M.; Pavlović, Vladimir B.; Ranđelović, Danijela; Nastasović, Aleksandra B.

(2019)

TY  - JOUR
AU  - Marković, Bojana M.
AU  - Spasojević, Vojislav
AU  - Dapčević, Aleksandra
AU  - Vuković, Zorica M.
AU  - Pavlović, Vladimir B.
AU  - Ranđelović, Danijela
AU  - Nastasović, Aleksandra B.
PY  - 2019
UR  - http://www.doiserbia.nb.rs/Article.aspx?ID=0367-598X1901025M
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8148
AB  - Magnetic and non-magnetic macroporous crosslinked copolymers of glycidyl methacrylate and trimethylolpropane trimethacrylate were prepared by suspension copolymerization and functionalized with diethylenetriamine. The samples were characterized by mercury porosimetry, scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy analysis (FTIR-ATR), thermogravimetric analysis (TGA), X-ray diffractometry (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM) and SQUID magnetometry. The FTIR-ATR analysis of synthesized magnetic nanocomposites confirmed the presence of magnetite and successful amino-functionalization. Non-functionalized and amino-functionalized nanocomposites exhibited superparamagnetic behavior at 300 K, with a saturation magnetization of 5.0 emu/g and 2.9 emu/g, respectively. TEM analysis of the magnetic nanocomposite has shown that magnetic nanoparticles were homogeneously dispersed in the polymer matrix. It was demonstrated that incorporation of magnetic nanoparticles enhanced the thermal stability of the magnetic nanocomposite in comparison to the initial non-magnetic macroporous copolymer. © 2019, Association of Chemists and Chemical Engineers of Serbia. All rights reserved.
T2  - Hemijska industrija
T1  - Characterization of glycidyl methacrylate based magnetic nanocomposites
VL  - 73
IS  - 1
SP  - 25
EP  - 35
DO  - 10.2298/HEMIND181113006M
ER  - 
@article{
author = "Marković, Bojana M. and Spasojević, Vojislav and Dapčević, Aleksandra and Vuković, Zorica M. and Pavlović, Vladimir B. and Ranđelović, Danijela and Nastasović, Aleksandra B.",
year = "2019",
abstract = "Magnetic and non-magnetic macroporous crosslinked copolymers of glycidyl methacrylate and trimethylolpropane trimethacrylate were prepared by suspension copolymerization and functionalized with diethylenetriamine. The samples were characterized by mercury porosimetry, scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy analysis (FTIR-ATR), thermogravimetric analysis (TGA), X-ray diffractometry (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM) and SQUID magnetometry. The FTIR-ATR analysis of synthesized magnetic nanocomposites confirmed the presence of magnetite and successful amino-functionalization. Non-functionalized and amino-functionalized nanocomposites exhibited superparamagnetic behavior at 300 K, with a saturation magnetization of 5.0 emu/g and 2.9 emu/g, respectively. TEM analysis of the magnetic nanocomposite has shown that magnetic nanoparticles were homogeneously dispersed in the polymer matrix. It was demonstrated that incorporation of magnetic nanoparticles enhanced the thermal stability of the magnetic nanocomposite in comparison to the initial non-magnetic macroporous copolymer. © 2019, Association of Chemists and Chemical Engineers of Serbia. All rights reserved.",
journal = "Hemijska industrija",
title = "Characterization of glycidyl methacrylate based magnetic nanocomposites",
volume = "73",
number = "1",
pages = "25-35",
doi = "10.2298/HEMIND181113006M"
}
Marković, B. M., Spasojević, V., Dapčević, A., Vuković, Z. M., Pavlović, V. B., Ranđelović, D.,& Nastasović, A. B.. (2019). Characterization of glycidyl methacrylate based magnetic nanocomposites. in Hemijska industrija, 73(1), 25-35.
https://doi.org/10.2298/HEMIND181113006M
Marković BM, Spasojević V, Dapčević A, Vuković ZM, Pavlović VB, Ranđelović D, Nastasović AB. Characterization of glycidyl methacrylate based magnetic nanocomposites. in Hemijska industrija. 2019;73(1):25-35.
doi:10.2298/HEMIND181113006M .
Marković, Bojana M., Spasojević, Vojislav, Dapčević, Aleksandra, Vuković, Zorica M., Pavlović, Vladimir B., Ranđelović, Danijela, Nastasović, Aleksandra B., "Characterization of glycidyl methacrylate based magnetic nanocomposites" in Hemijska industrija, 73, no. 1 (2019):25-35,
https://doi.org/10.2298/HEMIND181113006M . .
1
2
2

Characterization of red mud/metakaolin-based geopolymers as modified by Ca(OH)2

Bošković, Ivana V.; Vukčević, Mira; Nenadović, Snežana S.; Mirković, Miljana M.; Stojmenović, Marija; Pavlović, Vladimir B.; Kljajević, Ljiljana M.

(2019)

TY  - JOUR
AU  - Bošković, Ivana V.
AU  - Vukčević, Mira
AU  - Nenadović, Snežana S.
AU  - Mirković, Miljana M.
AU  - Stojmenović, Marija
AU  - Pavlović, Vladimir B.
AU  - Kljajević, Ljiljana M.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8351
AB  - Geopolymers are an emerging class of materials that offer an alternative to the Portland cement as the binder of structural concrete. One of the advantages is that the primary source of their production is waste alumosilicate materials from different industries. One of the key issues in geopolymer synthesis is the low level of mechanical properties due to porosity as well as the high activity of conductivity carriers. It can often lead to limited application possibilities, so the objective is to obtain an enhanced strength as well as decreased cracking tendency through microstructure modification. The introduction of Ca(OH)2, under certain pH conditions could lead to the filling-the-pores process and improving the mechanical properties. The aim was to understand the role that calcium plays in the geopolymer synthesis, and to define which reaction prevails under the synthesis conditions: formation of geopolymer gel or calcium silicate hydrate that contains aluminum substitution (CASH). The synthesis was performed with different raw materials (with or without red mud) and different alkalinity conditions. Ca(OH)2 was the obligatory supplement to both of the mixtures. Different techniques were performed for the testing of reaction products, as well as to define the microstructural changes as the generator of improved mechanical properties and changed electrical conductivity. The characteristics of the geopolymer's macrostructure were defined by means of an SEM analysis. Compressive strength and electrical conductivity are among the investigated product's properties. X-ray diffraction (XRD) and Fourier transform infra-red spectroscopy (FTIR) were used for the identification of various crystalline phases and an amorphous phase. ©, Institute of Metals and Technology, Ljubljana, Slovenia.
T2  - Materiali in tehnologije
T1  - Characterization of red mud/metakaolin-based geopolymers as modified by Ca(OH)2
VL  - 53
IS  - 3
SP  - 341
EP  - 348
DO  - 10.17222/mit.2018.130
ER  - 
@article{
author = "Bošković, Ivana V. and Vukčević, Mira and Nenadović, Snežana S. and Mirković, Miljana M. and Stojmenović, Marija and Pavlović, Vladimir B. and Kljajević, Ljiljana M.",
year = "2019",
abstract = "Geopolymers are an emerging class of materials that offer an alternative to the Portland cement as the binder of structural concrete. One of the advantages is that the primary source of their production is waste alumosilicate materials from different industries. One of the key issues in geopolymer synthesis is the low level of mechanical properties due to porosity as well as the high activity of conductivity carriers. It can often lead to limited application possibilities, so the objective is to obtain an enhanced strength as well as decreased cracking tendency through microstructure modification. The introduction of Ca(OH)2, under certain pH conditions could lead to the filling-the-pores process and improving the mechanical properties. The aim was to understand the role that calcium plays in the geopolymer synthesis, and to define which reaction prevails under the synthesis conditions: formation of geopolymer gel or calcium silicate hydrate that contains aluminum substitution (CASH). The synthesis was performed with different raw materials (with or without red mud) and different alkalinity conditions. Ca(OH)2 was the obligatory supplement to both of the mixtures. Different techniques were performed for the testing of reaction products, as well as to define the microstructural changes as the generator of improved mechanical properties and changed electrical conductivity. The characteristics of the geopolymer's macrostructure were defined by means of an SEM analysis. Compressive strength and electrical conductivity are among the investigated product's properties. X-ray diffraction (XRD) and Fourier transform infra-red spectroscopy (FTIR) were used for the identification of various crystalline phases and an amorphous phase. ©, Institute of Metals and Technology, Ljubljana, Slovenia.",
journal = "Materiali in tehnologije",
title = "Characterization of red mud/metakaolin-based geopolymers as modified by Ca(OH)2",
volume = "53",
number = "3",
pages = "341-348",
doi = "10.17222/mit.2018.130"
}
Bošković, I. V., Vukčević, M., Nenadović, S. S., Mirković, M. M., Stojmenović, M., Pavlović, V. B.,& Kljajević, L. M.. (2019). Characterization of red mud/metakaolin-based geopolymers as modified by Ca(OH)2. in Materiali in tehnologije, 53(3), 341-348.
https://doi.org/10.17222/mit.2018.130
Bošković IV, Vukčević M, Nenadović SS, Mirković MM, Stojmenović M, Pavlović VB, Kljajević LM. Characterization of red mud/metakaolin-based geopolymers as modified by Ca(OH)2. in Materiali in tehnologije. 2019;53(3):341-348.
doi:10.17222/mit.2018.130 .
Bošković, Ivana V., Vukčević, Mira, Nenadović, Snežana S., Mirković, Miljana M., Stojmenović, Marija, Pavlović, Vladimir B., Kljajević, Ljiljana M., "Characterization of red mud/metakaolin-based geopolymers as modified by Ca(OH)2" in Materiali in tehnologije, 53, no. 3 (2019):341-348,
https://doi.org/10.17222/mit.2018.130 . .
4
4
5

Efficient photocatalytic hydrogen production over titanate/titania nanostructures modified with nickel

Dostanić, Jasmina; Lončarević, Davor; Pavlović, Vladimir B.; Papan, Jelena; Nedeljković, Jovan

(2019)

TY  - JOUR
AU  - Dostanić, Jasmina
AU  - Lončarević, Davor
AU  - Pavlović, Vladimir B.
AU  - Papan, Jelena
AU  - Nedeljković, Jovan
PY  - 2019
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0272884219317018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8354
AB  - Nickel-modified titanate/TiO2 catalysts were prepared by deposition of nickel ions onto hydrothermally prepared titanate supports, followed by hydrogen temperature-programmed reduction. Two different nickel precursors (hydroxide and carbonate) were used to tune reducibility and to vary the crystal phase structure of the final catalysts. The precursor reducibility and functional properties of the final catalysts were investigated systematically using various characterisation techniques. The results revealed a more facile reduction of the hydroxide precursor compared to its carbonate counterpart. Moreover, it was found that the formation of the anatase phase was favoured by the use of the hydroxide precipitation agent. The photocatalytic activity towards hydrogen production of the prepared catalysts was evaluated in the presence of 2-propanol under simulated solar light irradiation. A thorough study of the photocatalytic performance of the synthesised catalysts was conducted as a function of the precipitation agent used and the reduction temperature applied. The catalyst with dominant anatase crystal phase displayed the highest photocatalytic activity with a maximum H2 production rate of 1040 μmol h−1 g−1, this being more than four times higher than that of its carbonate counterpart. The catalysts with titanate structure showed similar activity, independent of the precipitation method used. The nanotubular structure was found to be the dominant factor in the stability of photocatalysts under long-run working conditions. © 2019 Elsevier Ltd and Techna Group S.r.l.
T2  - Ceramics International
T1  - Efficient photocatalytic hydrogen production over titanate/titania nanostructures modified with nickel
VL  - 45
IS  - 15
SP  - 19447
EP  - 19455
DO  - 10.1016/j.ceramint.2019.06.200
ER  - 
@article{
author = "Dostanić, Jasmina and Lončarević, Davor and Pavlović, Vladimir B. and Papan, Jelena and Nedeljković, Jovan",
year = "2019",
abstract = "Nickel-modified titanate/TiO2 catalysts were prepared by deposition of nickel ions onto hydrothermally prepared titanate supports, followed by hydrogen temperature-programmed reduction. Two different nickel precursors (hydroxide and carbonate) were used to tune reducibility and to vary the crystal phase structure of the final catalysts. The precursor reducibility and functional properties of the final catalysts were investigated systematically using various characterisation techniques. The results revealed a more facile reduction of the hydroxide precursor compared to its carbonate counterpart. Moreover, it was found that the formation of the anatase phase was favoured by the use of the hydroxide precipitation agent. The photocatalytic activity towards hydrogen production of the prepared catalysts was evaluated in the presence of 2-propanol under simulated solar light irradiation. A thorough study of the photocatalytic performance of the synthesised catalysts was conducted as a function of the precipitation agent used and the reduction temperature applied. The catalyst with dominant anatase crystal phase displayed the highest photocatalytic activity with a maximum H2 production rate of 1040 μmol h−1 g−1, this being more than four times higher than that of its carbonate counterpart. The catalysts with titanate structure showed similar activity, independent of the precipitation method used. The nanotubular structure was found to be the dominant factor in the stability of photocatalysts under long-run working conditions. © 2019 Elsevier Ltd and Techna Group S.r.l.",
journal = "Ceramics International",
title = "Efficient photocatalytic hydrogen production over titanate/titania nanostructures modified with nickel",
volume = "45",
number = "15",
pages = "19447-19455",
doi = "10.1016/j.ceramint.2019.06.200"
}
Dostanić, J., Lončarević, D., Pavlović, V. B., Papan, J.,& Nedeljković, J.. (2019). Efficient photocatalytic hydrogen production over titanate/titania nanostructures modified with nickel. in Ceramics International, 45(15), 19447-19455.
https://doi.org/10.1016/j.ceramint.2019.06.200
Dostanić J, Lončarević D, Pavlović VB, Papan J, Nedeljković J. Efficient photocatalytic hydrogen production over titanate/titania nanostructures modified with nickel. in Ceramics International. 2019;45(15):19447-19455.
doi:10.1016/j.ceramint.2019.06.200 .
Dostanić, Jasmina, Lončarević, Davor, Pavlović, Vladimir B., Papan, Jelena, Nedeljković, Jovan, "Efficient photocatalytic hydrogen production over titanate/titania nanostructures modified with nickel" in Ceramics International, 45, no. 15 (2019):19447-19455,
https://doi.org/10.1016/j.ceramint.2019.06.200 . .
5
4
4

Hydrothermal synthesis of Mn2+ doped titanate nanotubes: Investigation of their structure and room temperature ferromagnetic behavior

Vranješ, Mila; Kuljanin-Jakovljević, Jadranka Ž.; Milošević, Milica V.; Ćirić-Marjanović, Gordana N.; Stoiljković, Milovan; Konstantinović, Zorica; Pavlović, Vladimir B.; Milivojević, Dušan; Šaponjić, Zoran

(2019)

TY  - JOUR
AU  - Vranješ, Mila
AU  - Kuljanin-Jakovljević, Jadranka Ž.
AU  - Milošević, Milica V.
AU  - Ćirić-Marjanović, Gordana N.
AU  - Stoiljković, Milovan
AU  - Konstantinović, Zorica
AU  - Pavlović, Vladimir B.
AU  - Milivojević, Dušan
AU  - Šaponjić, Zoran
PY  - 2019
UR  - https://linkinghub.elsevier.com/retrieve/pii/S1293255818312226
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8358
AB  - Hydrothermal synthesis of Mn2+ doped titanate nanotubes (TNTs), which exhibited room temperature ferromagnetism (RTFM), is reported. Dispersions of 1 and 5 at.% Mn2+ doped anatase TiO2 nanocrystals were used as precursors. Size and shape of Mn2+ doped TNTs and precursor nanocrystals were studied by transmission electron microscopy (TEM). The relatively uniform size distribution of transverse dimension of nanotubes of about 10 nm was observed while their lengths varied up to few hundred nanometers. The X-Ray Diffraction (XRD) analysis and Raman spectroscopy of resultant powder confirmed the hydrogen dititanate (H2Ti2O5 x H2O) crystal phase of Mn2+ doped TNTs with the presence of small amount of sodium titanates. Electron paramagnetic resonance (EPR) experiments were performed to probe the local atomic and electronic structure of Mn in the nanotubes. Room temperature ferromagnetic ordering with saturation magnetic moment (Ms) in the range of 0.6–1.5 μB per Mn atom was observed. © 2019 Elsevier Masson SAS
T2  - Solid State Sciences
T1  - Hydrothermal synthesis of Mn2+ doped titanate nanotubes: Investigation of their structure and room temperature ferromagnetic behavior
VL  - 94
SP  - 155
EP  - 161
DO  - 10.1016/j.solidstatesciences.2019.06.008
ER  - 
@article{
author = "Vranješ, Mila and Kuljanin-Jakovljević, Jadranka Ž. and Milošević, Milica V. and Ćirić-Marjanović, Gordana N. and Stoiljković, Milovan and Konstantinović, Zorica and Pavlović, Vladimir B. and Milivojević, Dušan and Šaponjić, Zoran",
year = "2019",
abstract = "Hydrothermal synthesis of Mn2+ doped titanate nanotubes (TNTs), which exhibited room temperature ferromagnetism (RTFM), is reported. Dispersions of 1 and 5 at.% Mn2+ doped anatase TiO2 nanocrystals were used as precursors. Size and shape of Mn2+ doped TNTs and precursor nanocrystals were studied by transmission electron microscopy (TEM). The relatively uniform size distribution of transverse dimension of nanotubes of about 10 nm was observed while their lengths varied up to few hundred nanometers. The X-Ray Diffraction (XRD) analysis and Raman spectroscopy of resultant powder confirmed the hydrogen dititanate (H2Ti2O5 x H2O) crystal phase of Mn2+ doped TNTs with the presence of small amount of sodium titanates. Electron paramagnetic resonance (EPR) experiments were performed to probe the local atomic and electronic structure of Mn in the nanotubes. Room temperature ferromagnetic ordering with saturation magnetic moment (Ms) in the range of 0.6–1.5 μB per Mn atom was observed. © 2019 Elsevier Masson SAS",
journal = "Solid State Sciences",
title = "Hydrothermal synthesis of Mn2+ doped titanate nanotubes: Investigation of their structure and room temperature ferromagnetic behavior",
volume = "94",
pages = "155-161",
doi = "10.1016/j.solidstatesciences.2019.06.008"
}
Vranješ, M., Kuljanin-Jakovljević, J. Ž., Milošević, M. V., Ćirić-Marjanović, G. N., Stoiljković, M., Konstantinović, Z., Pavlović, V. B., Milivojević, D.,& Šaponjić, Z.. (2019). Hydrothermal synthesis of Mn2+ doped titanate nanotubes: Investigation of their structure and room temperature ferromagnetic behavior. in Solid State Sciences, 94, 155-161.
https://doi.org/10.1016/j.solidstatesciences.2019.06.008
Vranješ M, Kuljanin-Jakovljević JŽ, Milošević MV, Ćirić-Marjanović GN, Stoiljković M, Konstantinović Z, Pavlović VB, Milivojević D, Šaponjić Z. Hydrothermal synthesis of Mn2+ doped titanate nanotubes: Investigation of their structure and room temperature ferromagnetic behavior. in Solid State Sciences. 2019;94:155-161.
doi:10.1016/j.solidstatesciences.2019.06.008 .
Vranješ, Mila, Kuljanin-Jakovljević, Jadranka Ž., Milošević, Milica V., Ćirić-Marjanović, Gordana N., Stoiljković, Milovan, Konstantinović, Zorica, Pavlović, Vladimir B., Milivojević, Dušan, Šaponjić, Zoran, "Hydrothermal synthesis of Mn2+ doped titanate nanotubes: Investigation of their structure and room temperature ferromagnetic behavior" in Solid State Sciences, 94 (2019):155-161,
https://doi.org/10.1016/j.solidstatesciences.2019.06.008 . .
8
5
6