Ceria Particles as Efficient Dopant in the Electrodeposition of Zn-Co-CeO2 Composite Coatings with Enhanced Corrosion Resistance: The Effect of Current Density and Particle Concentration
Autori
Riđošić, MarijaBučko, Mihael
Salicio-Paz, Asier
García-Lecina, Eva
Živković, Ljiljana
Bajat, Jelena B.
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Novel Zn-Co-CeO2 protective composite coatings were deposited successfully from chloride plating solutions. Two different types of ceria sources were used and compared: commercial ceria powder and home-made ceria sol. Electrodeposition was performed by a direct current in the range of 1–8 A dm−2. Two different agitation modes were used and compared, magnetic stirring and ultrasound-assisted stirring (US). The influence of magnetic stirring on the stability of the related plating baths was evaluated via a dynamic scattering method. The results pointed to better stability of the prepared ceria sol. The morphology of the composite coatings was examined by scanning electron microscopy (SEM), and particle content was determined by energy-dispersive X-ray spectroscopy (EDS). The results showed that the increase in the deposition current density was not beneficial to the coating morphology and particle content. The corrosion behavior of the Zn-Co-CeO2 composite coatings was analyzed and compa...red by electrochemical impedance spectroscopy and polarization resistance. The ultrasound-assisted electrodeposition at small current densities was favorable for obtaining composite coatings with enhanced corrosion stability. The protection was more effective when US was applied and, additionally, upon utilization of ceria sol as a particle source, which was revealed by higher polarization resistance and greater low-frequency impedance modulus values for sol-derived composite coatings deposited under ultrasound.
Ključne reči:
ceria powder / ceria sol / composite coatings / corrosion resistance / electrodeposition / ultrasoundIzvor:
Molecules, 2021, 26, 15, 4578-Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200135 (Univerzitet u Beogradu, Tehnološko-metalurški fakultet) (RS-MESTD-inst-2020-200135)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200017 (Univerzitet u Beogradu, Institut za nuklearne nauke Vinča, Beograd-Vinča) (RS-MESTD-inst-2020-200017)
- Ministerio de Ciencia e Innovación of the Spanish Government [SURF-ERA, EXP-00137314/CER-20191003]
DOI: 10.3390/molecules26154578
ISSN: 1420-3049
PubMed: 34361732
WoS: 000682189500001
Scopus: 2-s2.0-85112418761
Institucija/grupa
VinčaTY - JOUR AU - Riđošić, Marija AU - Bučko, Mihael AU - Salicio-Paz, Asier AU - García-Lecina, Eva AU - Živković, Ljiljana AU - Bajat, Jelena B. PY - 2021 UR - https://vinar.vin.bg.ac.rs/handle/123456789/9905 AB - Novel Zn-Co-CeO2 protective composite coatings were deposited successfully from chloride plating solutions. Two different types of ceria sources were used and compared: commercial ceria powder and home-made ceria sol. Electrodeposition was performed by a direct current in the range of 1–8 A dm−2. Two different agitation modes were used and compared, magnetic stirring and ultrasound-assisted stirring (US). The influence of magnetic stirring on the stability of the related plating baths was evaluated via a dynamic scattering method. The results pointed to better stability of the prepared ceria sol. The morphology of the composite coatings was examined by scanning electron microscopy (SEM), and particle content was determined by energy-dispersive X-ray spectroscopy (EDS). The results showed that the increase in the deposition current density was not beneficial to the coating morphology and particle content. The corrosion behavior of the Zn-Co-CeO2 composite coatings was analyzed and compared by electrochemical impedance spectroscopy and polarization resistance. The ultrasound-assisted electrodeposition at small current densities was favorable for obtaining composite coatings with enhanced corrosion stability. The protection was more effective when US was applied and, additionally, upon utilization of ceria sol as a particle source, which was revealed by higher polarization resistance and greater low-frequency impedance modulus values for sol-derived composite coatings deposited under ultrasound. T2 - Molecules T1 - Ceria Particles as Efficient Dopant in the Electrodeposition of Zn-Co-CeO2 Composite Coatings with Enhanced Corrosion Resistance: The Effect of Current Density and Particle Concentration VL - 26 IS - 15 SP - 4578 DO - 10.3390/molecules26154578 ER -
@article{ author = "Riđošić, Marija and Bučko, Mihael and Salicio-Paz, Asier and García-Lecina, Eva and Živković, Ljiljana and Bajat, Jelena B.", year = "2021", abstract = "Novel Zn-Co-CeO2 protective composite coatings were deposited successfully from chloride plating solutions. Two different types of ceria sources were used and compared: commercial ceria powder and home-made ceria sol. Electrodeposition was performed by a direct current in the range of 1–8 A dm−2. Two different agitation modes were used and compared, magnetic stirring and ultrasound-assisted stirring (US). The influence of magnetic stirring on the stability of the related plating baths was evaluated via a dynamic scattering method. The results pointed to better stability of the prepared ceria sol. The morphology of the composite coatings was examined by scanning electron microscopy (SEM), and particle content was determined by energy-dispersive X-ray spectroscopy (EDS). The results showed that the increase in the deposition current density was not beneficial to the coating morphology and particle content. The corrosion behavior of the Zn-Co-CeO2 composite coatings was analyzed and compared by electrochemical impedance spectroscopy and polarization resistance. The ultrasound-assisted electrodeposition at small current densities was favorable for obtaining composite coatings with enhanced corrosion stability. The protection was more effective when US was applied and, additionally, upon utilization of ceria sol as a particle source, which was revealed by higher polarization resistance and greater low-frequency impedance modulus values for sol-derived composite coatings deposited under ultrasound.", journal = "Molecules", title = "Ceria Particles as Efficient Dopant in the Electrodeposition of Zn-Co-CeO2 Composite Coatings with Enhanced Corrosion Resistance: The Effect of Current Density and Particle Concentration", volume = "26", number = "15", pages = "4578", doi = "10.3390/molecules26154578" }
Riđošić, M., Bučko, M., Salicio-Paz, A., García-Lecina, E., Živković, L.,& Bajat, J. B.. (2021). Ceria Particles as Efficient Dopant in the Electrodeposition of Zn-Co-CeO2 Composite Coatings with Enhanced Corrosion Resistance: The Effect of Current Density and Particle Concentration. in Molecules, 26(15), 4578. https://doi.org/10.3390/molecules26154578
Riđošić M, Bučko M, Salicio-Paz A, García-Lecina E, Živković L, Bajat JB. Ceria Particles as Efficient Dopant in the Electrodeposition of Zn-Co-CeO2 Composite Coatings with Enhanced Corrosion Resistance: The Effect of Current Density and Particle Concentration. in Molecules. 2021;26(15):4578. doi:10.3390/molecules26154578 .
Riđošić, Marija, Bučko, Mihael, Salicio-Paz, Asier, García-Lecina, Eva, Živković, Ljiljana, Bajat, Jelena B., "Ceria Particles as Efficient Dopant in the Electrodeposition of Zn-Co-CeO2 Composite Coatings with Enhanced Corrosion Resistance: The Effect of Current Density and Particle Concentration" in Molecules, 26, no. 15 (2021):4578, https://doi.org/10.3390/molecules26154578 . .