Search
Now showing items 1-7 of 7
Study of MW-scale biogas-fed SOFC-WGS-TSA-PEMFC hybrid power technology as distributed energy system: Thermodynamic, exergetic and thermo-economic evaluation
(International Journal of Hydrogen Energy, 2021)
Advanced biogas power generation technology has been attracting attentions, which contributes to the waste disposal and the mitigation of greenhouse gas emissions. This work proposes and models a novel biogas-fed hybrid ...
A continuous hydrogen absorption/desorption model for metal hydride reactor coupled with PCM as heat management and its application in the fuel cell power system
(International Journal of Hydrogen Energy, 2020)
In this work, the model of metal hydride reactor coupled with phase change material (PCM) as heat management is modified to describe the heat and mass transfer behaviors of the continuous hydrogen absorption/desorption ...
Life Cycle Energy Assessment of biohydrogen production via biogas steam reforming: Case study of biogas plant on a farm in Serbia
(International Journal of Hydrogen Energy, 2021)
The aim of this paper is to demonstrate and to quantify energy flows in a life cycle of biogas to biohydrogen production, starting from feedstock materials via anaerobic digestion, biogas upgrading, biohydrogen production, ...
The influence of defects on hydrogen sorption from Mg–V thin films
(International Journal of Hydrogen Energy, 2023)
In this paper hydrogen sorption properties of Mg–V multilayer thin films are studied. Thin films are synthesized by means of RF magnetron sputtering. Further modification of material is done using low energy H ion irradiation. ...
Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study
(International Journal of Hydrogen Energy, 2021)
LiAlH4 is a promising material for hydrogen storage, having the theoretical gravimetric density of 10.6 wt% H2. In order to decrease the temperature where hydrogen is released, we investigated the catalytic influence of ...
Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study
(International Journal of Hydrogen Energy, 2021)
LiAlH4 is a promising material for hydrogen storage, having the theoretical gravimetric density of 10.6 wt% H2. In order to decrease the temperature where hydrogen is released, we investigated the catalytic influence of ...
Hydrogen storage properties of MgH2–Tm: Ni-catalysis vs. mechanical milling
(International Journal of Hydrogen Energy, 2023)
The influence of the addition of nickel on hydrogen desorption from the MgH2–Ni composite was investigated. The composite powder was ball-milled for 15, 30 and 45 min and characterized by XRD, SEM-EDS, PSD, DSC and TPD ...