Modification of polyethylene’s surface properties by high fluence Fe implantation
Нема приказа
Аутори
Kisić, DaniloNenadović, Miloš
Barudžija, Tanja
Noga, Pavol
Vaňa, Dušan
Muška, Martin
Rakočević, Zlatko Lj.
Чланак у часопису (Објављена верзија)
,
© 2019 Elsevier B.V.
Метаподаци
Приказ свих података о документуАпстракт
In the presented paper, changes of high-density polyethylene's (HDPE) surface properties along with the changes of chemical composition, as a consequence of Fe ion implantation with different fluences, were investigated. Applied implantation fluences were as follows: 5 × 1016, 1 × 1017, 2 × 1017 and 5 × 1017 ions cm−2, while the implantation energy was 95 keV. The samples were analyzed by X-ray photoelectron spectroscopy (XPS), Atomic Force Microscopy (AFM), Four point contact probe, Fourier transform infrared spectroscopy (FTIR) and contact angle measurements. Significant changes in the chemical composition were found by XPS and FTIR, which were followed by changes in surface morphology, increase of roughness, and decrease of sheet resistance that has a percolation threshold that starts for the fluence of 1 × 1017 ions cm−2. Surface free energy increases as a consequence of implantation, up to the fluence of 1 × 1017 ions cm−2, and then decreases for the 2 higher fluences. © 2019 Else...vier B.V.
Кључне речи:
Ion implantation / Polyethylene / Surface morphology / Sheet resistance / Surface free energyИзвор:
Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2020, 462, 143-153Финансирање / пројекти:
- Функционални, функционализовани и усавршени нано материјали (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45005)
- European Regional Development Fund [ITMS: 26220220179]
- lovak Grant Agency VEGA [1/0330/18]
- Slovak Research and Development Agency [APVV-15-0049]
DOI: 10.1016/j.nimb.2019.11.022
ISSN: 0168-583X
WoS: 000502893100021
Scopus: 2-s2.0-85075047448
Колекције
Институција/група
VinčaTY - JOUR AU - Kisić, Danilo AU - Nenadović, Miloš AU - Barudžija, Tanja AU - Noga, Pavol AU - Vaňa, Dušan AU - Muška, Martin AU - Rakočević, Zlatko Lj. PY - 2020 UR - https://vinar.vin.bg.ac.rs/handle/123456789/8646 AB - In the presented paper, changes of high-density polyethylene's (HDPE) surface properties along with the changes of chemical composition, as a consequence of Fe ion implantation with different fluences, were investigated. Applied implantation fluences were as follows: 5 × 1016, 1 × 1017, 2 × 1017 and 5 × 1017 ions cm−2, while the implantation energy was 95 keV. The samples were analyzed by X-ray photoelectron spectroscopy (XPS), Atomic Force Microscopy (AFM), Four point contact probe, Fourier transform infrared spectroscopy (FTIR) and contact angle measurements. Significant changes in the chemical composition were found by XPS and FTIR, which were followed by changes in surface morphology, increase of roughness, and decrease of sheet resistance that has a percolation threshold that starts for the fluence of 1 × 1017 ions cm−2. Surface free energy increases as a consequence of implantation, up to the fluence of 1 × 1017 ions cm−2, and then decreases for the 2 higher fluences. © 2019 Elsevier B.V. T2 - Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms T1 - Modification of polyethylene’s surface properties by high fluence Fe implantation VL - 462 SP - 143 EP - 153 DO - 10.1016/j.nimb.2019.11.022 ER -
@article{ author = "Kisić, Danilo and Nenadović, Miloš and Barudžija, Tanja and Noga, Pavol and Vaňa, Dušan and Muška, Martin and Rakočević, Zlatko Lj.", year = "2020", abstract = "In the presented paper, changes of high-density polyethylene's (HDPE) surface properties along with the changes of chemical composition, as a consequence of Fe ion implantation with different fluences, were investigated. Applied implantation fluences were as follows: 5 × 1016, 1 × 1017, 2 × 1017 and 5 × 1017 ions cm−2, while the implantation energy was 95 keV. The samples were analyzed by X-ray photoelectron spectroscopy (XPS), Atomic Force Microscopy (AFM), Four point contact probe, Fourier transform infrared spectroscopy (FTIR) and contact angle measurements. Significant changes in the chemical composition were found by XPS and FTIR, which were followed by changes in surface morphology, increase of roughness, and decrease of sheet resistance that has a percolation threshold that starts for the fluence of 1 × 1017 ions cm−2. Surface free energy increases as a consequence of implantation, up to the fluence of 1 × 1017 ions cm−2, and then decreases for the 2 higher fluences. © 2019 Elsevier B.V.", journal = "Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms", title = "Modification of polyethylene’s surface properties by high fluence Fe implantation", volume = "462", pages = "143-153", doi = "10.1016/j.nimb.2019.11.022" }
Kisić, D., Nenadović, M., Barudžija, T., Noga, P., Vaňa, D., Muška, M.,& Rakočević, Z. Lj.. (2020). Modification of polyethylene’s surface properties by high fluence Fe implantation. in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 462, 143-153. https://doi.org/10.1016/j.nimb.2019.11.022
Kisić D, Nenadović M, Barudžija T, Noga P, Vaňa D, Muška M, Rakočević ZL. Modification of polyethylene’s surface properties by high fluence Fe implantation. in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 2020;462:143-153. doi:10.1016/j.nimb.2019.11.022 .
Kisić, Danilo, Nenadović, Miloš, Barudžija, Tanja, Noga, Pavol, Vaňa, Dušan, Muška, Martin, Rakočević, Zlatko Lj., "Modification of polyethylene’s surface properties by high fluence Fe implantation" in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 462 (2020):143-153, https://doi.org/10.1016/j.nimb.2019.11.022 . .