Hybrid materials based on rubber blend nanocomposites
Samo za registrovane korisnike
2019
Autori
Porobić, SlavicaMarković, Gordana
Ristić, Ivan
Samaržija-Jovanović, Suzana
Jovanović, Vojislav
Budinski-Simendić, Jaroslava K.
Marinović-Cincović, Milena
Članak u časopisu (Objavljena verzija)
,
© 2018 Society of Plastics Engineers
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
In this applicative work, two types of silica filler were used to increase the adhesion strength between steel and elastomeric hybrid materials based on chlorosulfonated polyethylene rubber (CSM) and polychloroprene rubber (CR) as network precursors. Precipitated silica (PS) with the average size of primary particles 15 nm and diatomaceous earth (DE) with the average size of primary particles 28 μm were used to ascertain differences in metal-elastomer compounds adhesion strength caused by different particle size. The ratio of network precursors in CSM/CR rubber blends was 50:50 (w/w). The filler loading was in the range of 0–35 phr. Characteristics of the obtained composites were examined by combining the cure kinetics, adhesion strength and the dynamic mechanical properties. The viscoelasticity of obtained hybrid materials was assessed by the mechanical spectrometer (in a single cantilever bending mode) in the temperature range from −50 °C to 150 °C using multifrequency mode. POLYM. C...OMPOS., 2018. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics Engineers
Izvor:
Polymer Composites, 2019, 40, 8, 3056-3064Finansiranje / projekti:
- Uticaj veličine, oblika i strukture nanočestica na njihova svojstva i svojstva nanokompozita (RS-MESTD-Basic Research (BR or ON)-172056)
- Višeskalno strukturiranje polimernih nanokompozita i funkcionalnih materijala primenom različitih prekursora (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45022)
- Materijali redukovane dimenzionalnosti za efikasnu apsorpciju svetlosti i konverziju energije (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45020)
DOI: 10.1002/pc.25150
ISSN: 0272-8397
WoS: 000478616300010
Scopus: 2-s2.0-85059069528
Kolekcije
Institucija/grupa
VinčaTY - JOUR AU - Porobić, Slavica AU - Marković, Gordana AU - Ristić, Ivan AU - Samaržija-Jovanović, Suzana AU - Jovanović, Vojislav AU - Budinski-Simendić, Jaroslava K. AU - Marinović-Cincović, Milena PY - 2019 UR - https://vinar.vin.bg.ac.rs/handle/123456789/8466 AB - In this applicative work, two types of silica filler were used to increase the adhesion strength between steel and elastomeric hybrid materials based on chlorosulfonated polyethylene rubber (CSM) and polychloroprene rubber (CR) as network precursors. Precipitated silica (PS) with the average size of primary particles 15 nm and diatomaceous earth (DE) with the average size of primary particles 28 μm were used to ascertain differences in metal-elastomer compounds adhesion strength caused by different particle size. The ratio of network precursors in CSM/CR rubber blends was 50:50 (w/w). The filler loading was in the range of 0–35 phr. Characteristics of the obtained composites were examined by combining the cure kinetics, adhesion strength and the dynamic mechanical properties. The viscoelasticity of obtained hybrid materials was assessed by the mechanical spectrometer (in a single cantilever bending mode) in the temperature range from −50 °C to 150 °C using multifrequency mode. POLYM. COMPOS., 2018. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics Engineers T2 - Polymer Composites T1 - Hybrid materials based on rubber blend nanocomposites VL - 40 IS - 8 SP - 3056 EP - 3064 DO - 10.1002/pc.25150 ER -
@article{ author = "Porobić, Slavica and Marković, Gordana and Ristić, Ivan and Samaržija-Jovanović, Suzana and Jovanović, Vojislav and Budinski-Simendić, Jaroslava K. and Marinović-Cincović, Milena", year = "2019", abstract = "In this applicative work, two types of silica filler were used to increase the adhesion strength between steel and elastomeric hybrid materials based on chlorosulfonated polyethylene rubber (CSM) and polychloroprene rubber (CR) as network precursors. Precipitated silica (PS) with the average size of primary particles 15 nm and diatomaceous earth (DE) with the average size of primary particles 28 μm were used to ascertain differences in metal-elastomer compounds adhesion strength caused by different particle size. The ratio of network precursors in CSM/CR rubber blends was 50:50 (w/w). The filler loading was in the range of 0–35 phr. Characteristics of the obtained composites were examined by combining the cure kinetics, adhesion strength and the dynamic mechanical properties. The viscoelasticity of obtained hybrid materials was assessed by the mechanical spectrometer (in a single cantilever bending mode) in the temperature range from −50 °C to 150 °C using multifrequency mode. POLYM. COMPOS., 2018. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics Engineers", journal = "Polymer Composites", title = "Hybrid materials based on rubber blend nanocomposites", volume = "40", number = "8", pages = "3056-3064", doi = "10.1002/pc.25150" }
Porobić, S., Marković, G., Ristić, I., Samaržija-Jovanović, S., Jovanović, V., Budinski-Simendić, J. K.,& Marinović-Cincović, M.. (2019). Hybrid materials based on rubber blend nanocomposites. in Polymer Composites, 40(8), 3056-3064. https://doi.org/10.1002/pc.25150
Porobić S, Marković G, Ristić I, Samaržija-Jovanović S, Jovanović V, Budinski-Simendić JK, Marinović-Cincović M. Hybrid materials based on rubber blend nanocomposites. in Polymer Composites. 2019;40(8):3056-3064. doi:10.1002/pc.25150 .
Porobić, Slavica, Marković, Gordana, Ristić, Ivan, Samaržija-Jovanović, Suzana, Jovanović, Vojislav, Budinski-Simendić, Jaroslava K., Marinović-Cincović, Milena, "Hybrid materials based on rubber blend nanocomposites" in Polymer Composites, 40, no. 8 (2019):3056-3064, https://doi.org/10.1002/pc.25150 . .