Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy
Нема приказа
Аутори
Vencl, AleksandarBobić, Biljana M.
Vučetić, Filip
Svoboda, Petr
Popović, Vladimir M.
Bobić, Ilija
Чланак у часопису (Објављена верзија)
,
© 2018, The Brazilian Society of Mechanical Sciences and Engineering
Метаподаци
Приказ свих података о документуАпстракт
Nanocomposites were synthesized via compocasting using Zn25Al3Si and Zn25Al3Si0.03Sr alloys as the matrices and nanoparticles of Al2O3 (1 wt%) as the reinforcement. Structure of the nanocomposites was examined, and their basic mechanical and tribological properties were tested. Distribution of primary silicon particles in the structure of nanocomposites has been improved compared to their distribution in the Zn25Al3Si matrix alloy due to the presence of Al2O3 nanoparticles and strontium. The primary silicon particles in the structure of the nanocomposites were found to be more fine-grained compared to the same particles in the structure of the as-cast Zn25Al3Si alloy. Tested mechanical properties of the nanocomposite with Zn25Al3Si alloy matrix are improved, compared to the matrix alloy. The nanocomposite with Zn25Al3Si0.03Sr alloy matrix is characterized with slightly higher value of compressive yield strength and a slightly lower hardness value compared to the as-cast Zn25Al3Si alloy.... Both nanocomposites showed lower wear rate and higher coefficient of friction, compared to the matrix alloy, in sliding under the boundary lubricating regime. However, the nanocomposite with Zn25Al3Si alloy matrix showed better tribological properties than the nanocomposite with Zn25Al3Si0.03Sr alloy matrix. © 2018, The Brazilian Society of Mechanical Sciences and Engineering.
Кључне речи:
Zn-Al-Si alloys / Strontium / Al2O3 nanoparticles / Microstructure / Fractography / Mechanical properties / Boundary lubrication / Friction / WearИзвор:
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40, 11, 513-Финансирање / пројекти:
- Утицај нано и микроструктурних конституената на синтезу и карактеристике савремених композитних материјала са металном основом (RS-172005)
- Развој триболошких микро/нано двокомпонентних и хибридних самоподмазујућих композита (RS-35021)
- Научно-технолошка подршка унапређењу безбедности специјалних друмских и шинских возила (RS-35045)
- Ministry of Education, Youth and Sports of Czech Republic (FSI-S-14-2336)
DOI: 10.1007/s40430-018-1441-9
ISSN: 1678-5878; 1806-3691
WoS: 000446746200003
Scopus: 2-s2.0-85054827006
URI
http://link.springer.com/10.1007/s40430-018-1441-9https://vinar.vin.bg.ac.rs/handle/123456789/7911
Колекције
Институција/група
VinčaTY - JOUR AU - Vencl, Aleksandar AU - Bobić, Biljana M. AU - Vučetić, Filip AU - Svoboda, Petr AU - Popović, Vladimir M. AU - Bobić, Ilija PY - 2018 UR - http://link.springer.com/10.1007/s40430-018-1441-9 UR - https://vinar.vin.bg.ac.rs/handle/123456789/7911 AB - Nanocomposites were synthesized via compocasting using Zn25Al3Si and Zn25Al3Si0.03Sr alloys as the matrices and nanoparticles of Al2O3 (1 wt%) as the reinforcement. Structure of the nanocomposites was examined, and their basic mechanical and tribological properties were tested. Distribution of primary silicon particles in the structure of nanocomposites has been improved compared to their distribution in the Zn25Al3Si matrix alloy due to the presence of Al2O3 nanoparticles and strontium. The primary silicon particles in the structure of the nanocomposites were found to be more fine-grained compared to the same particles in the structure of the as-cast Zn25Al3Si alloy. Tested mechanical properties of the nanocomposite with Zn25Al3Si alloy matrix are improved, compared to the matrix alloy. The nanocomposite with Zn25Al3Si0.03Sr alloy matrix is characterized with slightly higher value of compressive yield strength and a slightly lower hardness value compared to the as-cast Zn25Al3Si alloy. Both nanocomposites showed lower wear rate and higher coefficient of friction, compared to the matrix alloy, in sliding under the boundary lubricating regime. However, the nanocomposite with Zn25Al3Si alloy matrix showed better tribological properties than the nanocomposite with Zn25Al3Si0.03Sr alloy matrix. © 2018, The Brazilian Society of Mechanical Sciences and Engineering. T2 - Journal of the Brazilian Society of Mechanical Sciences and Engineering T1 - Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy VL - 40 IS - 11 SP - 513 DO - 10.1007/s40430-018-1441-9 ER -
@article{ author = "Vencl, Aleksandar and Bobić, Biljana M. and Vučetić, Filip and Svoboda, Petr and Popović, Vladimir M. and Bobić, Ilija", year = "2018", abstract = "Nanocomposites were synthesized via compocasting using Zn25Al3Si and Zn25Al3Si0.03Sr alloys as the matrices and nanoparticles of Al2O3 (1 wt%) as the reinforcement. Structure of the nanocomposites was examined, and their basic mechanical and tribological properties were tested. Distribution of primary silicon particles in the structure of nanocomposites has been improved compared to their distribution in the Zn25Al3Si matrix alloy due to the presence of Al2O3 nanoparticles and strontium. The primary silicon particles in the structure of the nanocomposites were found to be more fine-grained compared to the same particles in the structure of the as-cast Zn25Al3Si alloy. Tested mechanical properties of the nanocomposite with Zn25Al3Si alloy matrix are improved, compared to the matrix alloy. The nanocomposite with Zn25Al3Si0.03Sr alloy matrix is characterized with slightly higher value of compressive yield strength and a slightly lower hardness value compared to the as-cast Zn25Al3Si alloy. Both nanocomposites showed lower wear rate and higher coefficient of friction, compared to the matrix alloy, in sliding under the boundary lubricating regime. However, the nanocomposite with Zn25Al3Si alloy matrix showed better tribological properties than the nanocomposite with Zn25Al3Si0.03Sr alloy matrix. © 2018, The Brazilian Society of Mechanical Sciences and Engineering.", journal = "Journal of the Brazilian Society of Mechanical Sciences and Engineering", title = "Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy", volume = "40", number = "11", pages = "513", doi = "10.1007/s40430-018-1441-9" }
Vencl, A., Bobić, B. M., Vučetić, F., Svoboda, P., Popović, V. M.,& Bobić, I.. (2018). Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy. in Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(11), 513. https://doi.org/10.1007/s40430-018-1441-9
Vencl A, Bobić BM, Vučetić F, Svoboda P, Popović VM, Bobić I. Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy. in Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018;40(11):513. doi:10.1007/s40430-018-1441-9 .
Vencl, Aleksandar, Bobić, Biljana M., Vučetić, Filip, Svoboda, Petr, Popović, Vladimir M., Bobić, Ilija, "Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy" in Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, no. 11 (2018):513, https://doi.org/10.1007/s40430-018-1441-9 . .