Surface texturing of the carbon steel AISI 1045 using femtosecond laser in single pulse and scanning regime
Апстракт
Surface texturing of the metals, including steels, gained a new dimension with the appearance of femtosecond lasers. These laser systems enable highly precise modifications, which are very important for numerous applications of metals. The effects of a Ti:sapphire femtosecond laser with the pulse duration of 160 fs, operating at 775 nm wavelength and in two operational regimes - single pulse (SP) and scanning regime, on a high quality AISI 1045 carbon steel were studied. The estimated surface damage threshold was 0.22 J/cm(2) (SP). Surface modification was studied for the laser fluences of 0.66, 1.48 and 2.37 J/cm(2). The fluence of 0.66 J/cm(2), in both working regimes, induced texturing of the material, i.e. formation of periodic surface structures (PSS). Their periodicity was in accordance with the used laser wavelength. Finally, changes in the surface oxygen content caused by ultrashort laser pulses were recorded. (C) 2011 Elsevier B.V. All rights reserved.
Кључне речи:
Steel / Femtosecond laser / Laser processing / Periodic surface structuresИзвор:
Applied Surface Science, 2011, 258, 1, 290-296Финансирање / пројекти:
- Ефекти дејства ласерског зрачења и плазме на савремене материјале при њиховој синтези, модификацији и анализи (RS-MESTD-Basic Research (BR or ON)-172019)
DOI: 10.1016/j.apsusc.2011.08.052
ISSN: 0169-4332
WoS: 000296492500049
Scopus: 2-s2.0-80054773591
Колекције
Институција/група
VinčaTY - JOUR AU - Stašić, Jelena AU - Gaković, Biljana M. AU - Perrie, Walter AU - Watkins, K. AU - Petrović, Suzana AU - Trtica, Milan PY - 2011 UR - https://vinar.vin.bg.ac.rs/handle/123456789/4545 AB - Surface texturing of the metals, including steels, gained a new dimension with the appearance of femtosecond lasers. These laser systems enable highly precise modifications, which are very important for numerous applications of metals. The effects of a Ti:sapphire femtosecond laser with the pulse duration of 160 fs, operating at 775 nm wavelength and in two operational regimes - single pulse (SP) and scanning regime, on a high quality AISI 1045 carbon steel were studied. The estimated surface damage threshold was 0.22 J/cm(2) (SP). Surface modification was studied for the laser fluences of 0.66, 1.48 and 2.37 J/cm(2). The fluence of 0.66 J/cm(2), in both working regimes, induced texturing of the material, i.e. formation of periodic surface structures (PSS). Their periodicity was in accordance with the used laser wavelength. Finally, changes in the surface oxygen content caused by ultrashort laser pulses were recorded. (C) 2011 Elsevier B.V. All rights reserved. T2 - Applied Surface Science T1 - Surface texturing of the carbon steel AISI 1045 using femtosecond laser in single pulse and scanning regime VL - 258 IS - 1 SP - 290 EP - 296 DO - 10.1016/j.apsusc.2011.08.052 ER -
@article{ author = "Stašić, Jelena and Gaković, Biljana M. and Perrie, Walter and Watkins, K. and Petrović, Suzana and Trtica, Milan", year = "2011", abstract = "Surface texturing of the metals, including steels, gained a new dimension with the appearance of femtosecond lasers. These laser systems enable highly precise modifications, which are very important for numerous applications of metals. The effects of a Ti:sapphire femtosecond laser with the pulse duration of 160 fs, operating at 775 nm wavelength and in two operational regimes - single pulse (SP) and scanning regime, on a high quality AISI 1045 carbon steel were studied. The estimated surface damage threshold was 0.22 J/cm(2) (SP). Surface modification was studied for the laser fluences of 0.66, 1.48 and 2.37 J/cm(2). The fluence of 0.66 J/cm(2), in both working regimes, induced texturing of the material, i.e. formation of periodic surface structures (PSS). Their periodicity was in accordance with the used laser wavelength. Finally, changes in the surface oxygen content caused by ultrashort laser pulses were recorded. (C) 2011 Elsevier B.V. All rights reserved.", journal = "Applied Surface Science", title = "Surface texturing of the carbon steel AISI 1045 using femtosecond laser in single pulse and scanning regime", volume = "258", number = "1", pages = "290-296", doi = "10.1016/j.apsusc.2011.08.052" }
Stašić, J., Gaković, B. M., Perrie, W., Watkins, K., Petrović, S.,& Trtica, M.. (2011). Surface texturing of the carbon steel AISI 1045 using femtosecond laser in single pulse and scanning regime. in Applied Surface Science, 258(1), 290-296. https://doi.org/10.1016/j.apsusc.2011.08.052
Stašić J, Gaković BM, Perrie W, Watkins K, Petrović S, Trtica M. Surface texturing of the carbon steel AISI 1045 using femtosecond laser in single pulse and scanning regime. in Applied Surface Science. 2011;258(1):290-296. doi:10.1016/j.apsusc.2011.08.052 .
Stašić, Jelena, Gaković, Biljana M., Perrie, Walter, Watkins, K., Petrović, Suzana, Trtica, Milan, "Surface texturing of the carbon steel AISI 1045 using femtosecond laser in single pulse and scanning regime" in Applied Surface Science, 258, no. 1 (2011):290-296, https://doi.org/10.1016/j.apsusc.2011.08.052 . .