Претраживање
Приказ резултата 1-10 од 34
Synthesis and characterization of high-pressure and high-temperature sphene (CaTiSiO5)
(Physics and Chemistry of Minerals, 2014)
Sphene (CaTiSiO5), a calcium titanosilicate ceramic has been prepared from a powder mixture of CaCO3, TiO2 and SiO2 using vibro-milling for homogenization and activation of precursors. During the high-pressure and ...
Structural investigation of mechanically activated nanocrystalline BaTiO3 powders
(Elsevier, 2011)
In this article, in order to obtain tetragonal nanocrystalline BaTiO3, structural investigations of mechanically activated BaTiO3 powder have been performed. A mercury porosimetry analysis and scanning electron microscopy ...
Structural investigation of mechanically activated ZnO powder
(Journal of Alloys and Compounds, 2015)
Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders ...
Influence of femtosecond pulsed laser irradiation on bismuth germanium oxide single crystal properties
(Materials Research Bulletin, 2016)
High quality bismuth germanium oxide single crystals were irradiated by a femtosecond pulsed laser beam of increasing power. Analyses performed on irradiated and unirradiated samples showed significant changes in transmittance, ...
Studies on structural, morphological and electrical properties of Ce1-xErxO2-delta (x=0.05-0.20) as solid electrolyte for IT - SOFC
(Materials Chemistry and Physics, 2015)
A series of four different powders ceria doped Ce1-xErxO2-delta (0.05 LT = x LT = 0.20) were synthesized by applying self-propagating reaction at room temperature (SPRT method). SPRT procedure is based on the self-propagating ...
Spectroscopy investigation of nanostructured nickel-zinc ferrite obtained by mechanochemical synthesis
(Materials Research Bulletin, 2015)
Nano crystalline samples of nickel zinc ferrite, Ni0.5Zn0.5Fe2O4 were prepared by mechanochemical route in a planetary ball mill starting from two mixtures of the appropriate quantities of the powders: case (1) oxide ...
Synthesis, structure and spectroscopic properties of luminescent GdVO4:Dy3+ and DyVO4 particles
(Optical Materials, 2018)
In this work, we focused on the syntheses, structure and spectroscopic properties of GdVO4:Dy3+ and DyVO4 (nano)particles of different sizes and shapes (spherical nanoparticles of 2 nm, 4 nm, and 20 nm in size, nanorods ...
Synthesis and characterization of ceria based nanometric powders
(Journal of Power Sources, 2009)
Nanopowdered solid solution Ce(1-x)Fe(x)O(2-delta) samples (0 LT = x LT = 0.1) were synthesized by a self-propagating room temperature synthesis (SPRT). XRD and Raman spectroscopy at room temperature were used to study the ...
Effect of samarium addition and annealing on the properties of electrodeposited ceria thin films
(Thin Solid Films, 2011)
Samarium (Sm)-doped ceria (CeO2) (SDC) is a promising material for high temperature electrochemical devices. Our work demonstrates that thin SDC films can be prepared by a cost-effective electrodeposition method at a ...
Synthesis and characterization of Cu-doped ceria nanopowders
(Ceramics International, 2011)
Nanopowdered solid solution Ce(1-x)Cu(x)O(2-gamma) samples (0 LT = x LT = 0.15) were synthesized by self-propagating room temperature synthesis (SPRT). Raman spectroscopy and XRD at room temperature were used to study the ...