Thermal shock damage characterization of high temperature ceramics by non destructive test methods
2008
Преузимање 🢃
Аутори
Dimitrijevic, MarijaPošarac, Milica B.
Majstorović, Jelena
Volkov-Husović, Tatjana
Devečerski, Aleksandar
Matović, Branko
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In the present work a mixture of commercially available spinel, quartz (SiO2) and alumina (Al2O3) corresponding to cordierite stoichiometry was used as starting material for obtaining cordierite/SiC composite ceramics with weight ratio 30:70 and 50:50. Cordierite and silicon carbide are ceramic materials suitable for high temperature application with superior thermal shock resistance, low thermal expansion coefficient and good chemical resistance. The composite material could exhibit advantages of its constituents when the components have optimized properties and they are mixed in the proper ratio. Behavior of composite ceramics after thermal shock treatments was investigated. Thermal shock of quenching was monitored by image analysis. Ultrasonic measurements were used as non-destrusctive before and during quenching was monitored by image analysis. Ultrasonic measurements were used as non-destructive quantification of thermal shock damage in refractory specimens. Dynamic Young modulus ...of elasticity and strength degradation were calculated using measured values of ultrasonic velocities obtained by ultrasonic measurements.
Кључне речи:
ultrasonic velocity / refractories / cordierite/SiC composite ceramics / thermal shock resistanceИзвор:
Ceramics-silikaty, 2008, 52, 2, 115-119Финансирање / пројекти:
- Ministry of Science and Environment of Serbia [MXT 6717]
- Наноструктурни неоксидни керамички и карбонски материјали и њихови композити (RS-MESTD-MPN2006-2010-142016)
Колекције
Институција/група
VinčaTY - JOUR AU - Dimitrijevic, Marija AU - Pošarac, Milica B. AU - Majstorović, Jelena AU - Volkov-Husović, Tatjana AU - Devečerski, Aleksandar AU - Matović, Branko PY - 2008 UR - https://vinar.vin.bg.ac.rs/handle/123456789/3522 AB - In the present work a mixture of commercially available spinel, quartz (SiO2) and alumina (Al2O3) corresponding to cordierite stoichiometry was used as starting material for obtaining cordierite/SiC composite ceramics with weight ratio 30:70 and 50:50. Cordierite and silicon carbide are ceramic materials suitable for high temperature application with superior thermal shock resistance, low thermal expansion coefficient and good chemical resistance. The composite material could exhibit advantages of its constituents when the components have optimized properties and they are mixed in the proper ratio. Behavior of composite ceramics after thermal shock treatments was investigated. Thermal shock of quenching was monitored by image analysis. Ultrasonic measurements were used as non-destrusctive before and during quenching was monitored by image analysis. Ultrasonic measurements were used as non-destructive quantification of thermal shock damage in refractory specimens. Dynamic Young modulus of elasticity and strength degradation were calculated using measured values of ultrasonic velocities obtained by ultrasonic measurements. T2 - Ceramics-silikaty T1 - Thermal shock damage characterization of high temperature ceramics by non destructive test methods VL - 52 IS - 2 SP - 115 EP - 119 UR - https://hdl.handle.net/21.15107/rcub_vinar_3522 ER -
@article{ author = "Dimitrijevic, Marija and Pošarac, Milica B. and Majstorović, Jelena and Volkov-Husović, Tatjana and Devečerski, Aleksandar and Matović, Branko", year = "2008", abstract = "In the present work a mixture of commercially available spinel, quartz (SiO2) and alumina (Al2O3) corresponding to cordierite stoichiometry was used as starting material for obtaining cordierite/SiC composite ceramics with weight ratio 30:70 and 50:50. Cordierite and silicon carbide are ceramic materials suitable for high temperature application with superior thermal shock resistance, low thermal expansion coefficient and good chemical resistance. The composite material could exhibit advantages of its constituents when the components have optimized properties and they are mixed in the proper ratio. Behavior of composite ceramics after thermal shock treatments was investigated. Thermal shock of quenching was monitored by image analysis. Ultrasonic measurements were used as non-destrusctive before and during quenching was monitored by image analysis. Ultrasonic measurements were used as non-destructive quantification of thermal shock damage in refractory specimens. Dynamic Young modulus of elasticity and strength degradation were calculated using measured values of ultrasonic velocities obtained by ultrasonic measurements.", journal = "Ceramics-silikaty", title = "Thermal shock damage characterization of high temperature ceramics by non destructive test methods", volume = "52", number = "2", pages = "115-119", url = "https://hdl.handle.net/21.15107/rcub_vinar_3522" }
Dimitrijevic, M., Pošarac, M. B., Majstorović, J., Volkov-Husović, T., Devečerski, A.,& Matović, B.. (2008). Thermal shock damage characterization of high temperature ceramics by non destructive test methods. in Ceramics-silikaty, 52(2), 115-119. https://hdl.handle.net/21.15107/rcub_vinar_3522
Dimitrijevic M, Pošarac MB, Majstorović J, Volkov-Husović T, Devečerski A, Matović B. Thermal shock damage characterization of high temperature ceramics by non destructive test methods. in Ceramics-silikaty. 2008;52(2):115-119. https://hdl.handle.net/21.15107/rcub_vinar_3522 .
Dimitrijevic, Marija, Pošarac, Milica B., Majstorović, Jelena, Volkov-Husović, Tatjana, Devečerski, Aleksandar, Matović, Branko, "Thermal shock damage characterization of high temperature ceramics by non destructive test methods" in Ceramics-silikaty, 52, no. 2 (2008):115-119, https://hdl.handle.net/21.15107/rcub_vinar_3522 .